FOCAL
FOCAL Gr 3 Km - K2 Power M Line Grille For 3 Km (Each) - GRILLE 3” (each)
$65.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 3” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL
FOCAL Hilo V3.0 Stereo Amplified Signal Converter - Hi-Lo V3
$105.00
In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3.
HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units.
Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.
FOCAL
FOCAL Inside Pw Sup 600Amplifier Power Wiring Kit - IW-PWSUP600
$65.00
FOCAL INSIDE PW SUP 600AMPLIFIER POWER WIRING KIT
Power and ground wires for a Focal amp
Focal designed this wiring kit to provide power and ground connections for a Focal Impulse 4.320 amplifier. The kit includes:
20' power cable with ring terminal and in-line fuse holder installed,
3' ground cable with ring terminal installed,
30A fuse,
2 crimp-on butt connectors.
Note: This wiring kit is designed to provide only power and ground connections. This kit does not include speaker wire, RCA patch cables, or a remote turn-on wire.
Warranty: 1 year.
What's in the box:
20' Length of 12-gauge power wire with in-line fuse holder (ring-terminal on one end)
40" Length of 12-gauge ground wire (ring-terminal on one end)
15-amp ATO fuse (installed in fuse holder)
30-amp ATO fuse
Two 12-10 gauge crimp-splice connectors (yellow)
Other info:
MFR # IW PW SUP 600
Item # 091PWSUP60
Features
Overview: This power and ground wire kit pairs with the Focal ISO extension cable (item number 091IMPEXT1, sold separately) and vehicle specific harness when adding the Focal Impulse 4.320 amplifier to a compatible vehicle. 15-amp and 30-amp fuses are included.
FOCAL
FOCAL Iw Imp Ext 150 "Y" Adapter Cable For Impulse 4.320 Iso Standard - IW-IMP-EXT150
$100.00
IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs
Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers.
Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.
Developed with twisted cables to effectively eliminate disturbance
Three different lengths to suit all vehicles
Cut-resistant protective shield
Great flexibility for the easiest possible installation
Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320
No soldering required
Length: 5ft (1,50m)
FOCAL
FOCAL Vw Y-Iso Harness Iso Harness Cable - IW-VW-YISO
$120.00
ISO harness cable
The Focal Inside VOLKSWAGEN Y-ISO HARNESS car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. It allows connection to the original Volkswagen car radio and quick and easy connection of Focal Inside extension cables. Designed specifically for Volkswagen vehicles after 2005, this one-meter-long cable allows easy Plug & Play installation. Connection to the extension cable is via ISO connectors; no soldering is required.
FOCAL
FOCAL Flax Evo Series P20Fse Shallow - P20FSE Shallow
$605.00
In addition to its 400-watt power and its Flax cone for a natural sound, one of the highlights of the P 20 FSE subwoofer is its unique slim design, making it light and even easier to install in your vehicle.
Its built-in motor adds to its compactness, without compromising on the power delivered. Its robust shaped rubber surround allows impressive articulation, synonymous with extended frequency response and deep bass reproduction. Finally, the 1 1/2″ (38mm) coil on glass fibre stand reduces overheating to guarantee perfectly adapted ventilation.
P 20 FSE is the ideal compromise for a very compact sealed-box use (6 to 9L).
P20FSE Features
Unique, patented Flax cone
“Dual Magnet” motor
Made in France in the Focal workshops
Slim design, even easier integration
Power and precision
FOCAL
FOCAL Slate Fibre Series Pc165Sf - PC165SF
$515.00
Step up to Slatefiber
You can always count on Focal's dedication to innovation. From beryllium to flax, their research and development team search far and wide in the hunt for exceptional speaker materials. With Focal PC 165 SF 6-1/2" 2-way car speakers they've brought Slatefiber into the fold. You can also find Slatefiber cones in high-performance home speakers like their floor-standing Chora Series. Made from non-woven, recycled carbon fibers and manufactured in France, the lightweight Slatefiber cone offers exceptional rigidity and damping qualities to provide a dynamic yet balanced sound, especially in the midrange. Focal employs their famous inverted dome tweeter to distribute high frequencies in a wide pattern for the most natural soundstage possible.
Serious power-handling
If you want to make the most of Focal's groundbreaking design, we suggest powering them with up to 80 watts RMS of aftermarket power. Because of their impressive sensitivity, these speakers will do quite well with factory power too.
And they look cool
The aluminum basket is reinforced with a streamlined "rotor" design that not only looks cool, but provides a non-resonant platform for the speaker's superior components. Plus, the unique blue color of the woofer cone is unlike any car speaker we've seen before.
Product highlights:
6-1/2" 2-way car speakers (pair)
Slatefiber woofer cone
aluminum/magnesium inverted dome tweeter
4-ohm impedance
handles up to 80 watts RMS (160 watts peak)
frequency response: 60-21,000 Hz
sensitivity: 91 dB at 2.83 volts
mounting depth: 2-13/16"
warranty: 1 year
MFR # PC 165 SF
Item # 091PC165SF
What's in the box:
Two 2-way speakers
2 Grilles
2 Grille mounting rings
Grille putty
2 Foam woofer gaskets
8 Speed clips
Eight 1" Pan head screws
Owner's manual (English/ French)
Focal window sticker
FOCAL
FOCAL Polyglass Series Sub P25Db - SUB P25DB
$499.00
Focal’s Performance Series subwoofers deliver pure bass power so your music always hits strong and true.
This Performance 10″ sub features a light, tough poly cone and a self-regulating cooling system, so it’ll perform reliably. A butyl rubber surround adds to the sub’s strength, durability, and accuracy.
SUB P25DB Description
With heavy ferrite magnets and 4-layer voice coils, it’s no surprise this sub handles plenty of power — up to 250 watts RMS.
The good sensitivity rating means your amp won’t have to work so hard to drive this sub, so you’ll get maximum wallop per watt. The dual 4-ohm voice coils allow you to wire the sub for either 2-ohm or 8-ohm impedance, and you’ll appreciate that versatility as your system grows and changes.
You can install this sub in a sealed box for tight, punchy bass, or in a ported enclosure for a little more boom.
SUB P25DB Technical specifications
10″ subwoofer with dual 4-ohm voice coils
polypropylene cone with butyl rubber surround
power range: 50-250 watts RMS
peak power handling: 500 watts
frequency response: 42-500 Hz
sensitivity: 90.9 dB
top-mount depth: 5-7/16″
sealed box volume: 0.88-1.59 cubic feet
ported box volume: 1.24-2.82 cubic feet
FOCAL
FOCAL Wiring Harnesses For Inside Packs - IW-IMP2.1
$120.00
The Focal Inside IW IMP 2.1 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL
FOCAL Wiring Harnesses For Inside Packs Iw-Imp2.2 - IW-IMP2.2
$120.00
The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Imp2.1 - IW-BMW-IMP2.1
$150.00
Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness
The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple.
This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.
FOCAL
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Yiso - IW-BMW-YISO
$100.00
The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables.
* Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer.
Additional Information
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 3.28ft (1 m)
GME
GME Universal Antenna Base With Low Loss Foam Coax & Pl259 Abl001 - SPK45B
$39.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The SPK45B is an extension speaker to suit a wide range of GME radios to enhance the audio experience in noisy environments, ensuring important calls are never missed.
With 4 Watts of output power and a super compact size this extension speaker is the ideal solution for installations where space is limited.
Supplied with lead, plug, mounting bracket and mounting hardware.
Also available in White (SPK45).
4 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimensions: 65 x 65 x 64 mm (WxHxD)
1 Year Warranty
Key Features
4 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimensions: 65 x 65 x 64 mm (WxHxD)
In the box
Extension Speaker (SPK45B)
Lead & Plug
Mounting Bracket
Mounting Hardware
GME
GME Magnetic Antenna Base With Lead & Plug Ab406 - SPK09
$59.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The SPK09 is an extension speaker to suit a wide range of GME radios to enhance the audio experience in noisy environments, ensuring important calls are never missed.
With 7 Watts of output power and a super compact size this extension speaker is the ideal solution for installations where space is limited.
Supplied with lead, plug, mounting bracket and mounting hardware.
7 Watt Output Power
Impedance: 4 Ohms
Super Compact Size
Dimensions: 112 x 123 x 63mm (HxWxD)
1 Year Warranty
Key Features
7 Watt Output Power
Impedance: 4 Ohms
Super Compact Size
Dimensions: 112 x 123 x 63mm (HxWxD)
In the box
Extension Speaker (SPK09)
Lead & Plug
Mounting Bracket
Mounting Hardware
GME
GME 650Mm Am/Fm Fiberglass Antenna With Base, Lead And Plug Aem7 - SPK08
$59.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The SPK08 is an extension speaker to suit a wide range of GME radios to enhance the audio experience in noisy environments, ensuring important calls are never missed.
With 7 Watts of output power and a super compact size this extension speaker is the ideal solution for installations where space is limited.
Supplied with lead, plug, mounting bracket and mounting hardware.
7 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimensions: 192 x 182 x 63mm (WxHxD)
1 Year Warranty
Key Features
7 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimension: 192 x 182 x 63mm (WxHxD)
In the box
Extension Speaker (SPK08)
Lead & Plug
Mounting Bracket
Mounting Hardware
GME
GME 700Mm Stainless Steel Antenna With Base, Lead And Plug Aem6 - SPK07
$54.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The SPK07 is an extension speaker to suit a wide range of GME radios to enhance the audio experience in noisy environments, ensuring important calls are never missed.
With 2 Watts of output power and a super compact size this extension speaker is the ideal solution for installations where space is limited.
Supplied with lead, plug, mounting bracket and mounting hardware.
2 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimensions: 67 x 75 x 31mm (HxWxD)
1 Year Warranty
Key Features
2 Watt Output Power
Impedance: 8 Ohms
Super Compact Size
Dimensions: 67 x 75 x 31mm (HxWxD)
In the box
Extension Speaker (SPK07)
Lead & Plug
Mounting Bracket
Mounting Hardware
GME
GME 1295Mm Stainless Steel Antenna With Base, Lead And Plug Aem5 - SPK04
$59.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The SPK04 is an extension speaker to suit a wide range of GME radios to enhance the audio experience in noisy environments, ensuring important calls are never missed.
With 3 Watts of output power and a compact size this extension speaker is the ideal solution for installations where space is limited.
Supplied with lead, plug, mounting bracket and mounting hardware.
3 Watt Output Power
Impedance: 4 Ohms
Compact Size
Dimensions: 66 x 113 x 56mm (HxWxD)
1 Year Warranty
Key Features
3 Watt Output Power
Impedance: 4 Ohms
Compact Size
Dimensions: 66 x 113 x 56mm (HxWxD)
In the box
Extension Speaker (SPK04)
Lead & Plug
Mounting Bracket
Mounting Hardware
![[OUT OF STOCK] JL Audio 13W3v3-4 W3v3 13.5-inch Subwoofer Driver](http://tjmnorthernbeaches.com.au/cdn/shop/files/62be5a71a86e978fce3611d0b5625f67_4491f325-ad75-43cb-ab2b-0344983119b6_10x.jpg?v=1746157957)
JL Audio
[OUT OF STOCK] JL Audio 13W3v3-4 W3v3 13.5-inch Subwoofer Driver
$889.00
If you have the space, it makes a tremendous sense to maximize your subwoofer system's piston area to enhance efficiency (and output). It gets even better when the larger driver delivers additional power handling and excursion. For the preceding reasons, the 13W3v3 can be the best choice for those seeking high output with great sound quality at medium power levels.
As with the smaller W3v3's, several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 13W3v3 to enhance linearity and reliability.
The 13W3v3-4 is best used with amplifier power in the 150W - 600W range and is optimized to operate in a moderate size 1.5 cu. ft. (42.5 l) sealed enclosure, or a 2.25 cu. ft. (63.7 l) ported enclosure.
Continuous Power Handling (RMS)
600 W
Recommended Amplifier Power (RMS)
150 - 600 W
Nominal Impedance (Znom)
4 Ω
JL Audio
JL AUDIO Coaxial Speaker System - C2-525x
$439.00
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-525x system features 5.25-inch (130 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Speaker grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
Continuous Power Handling (RMS)
60 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
15 - 100 W / Ch.
System Efficiency
89.0 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
63 Hz - 22 KHz ± 3 dB
JL Audio
JL AUDIO Coaxial Speaker System - C2-570x
$439.00
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
Many people mistakenly believe that an oval speaker cannot perform as well as around one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems.
The C2-570x system features 5 x 7 / 6 x 8-inch (125 x 180 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Grilles are not available for this speaker system.
Sonic character: Clean and Dynamic
Sold as a pair.
Continuous Power Handling (RMS)
60 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
15 - 100 W / Ch.
System Efficiency
90.5 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
53 Hz - 22 KHz ± 3 dB
JL Audio
JL AUDIO Coaxial Speaker System - C2-600x
$439.00
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-600x system features 6-inch (150 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.
The 6-inch (150 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
JL Audio
JL AUDIO Coaxial Speaker System - C2-650x
$439.00
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-650x system features 6.5-inch (165 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.
The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.
Tweeters are coaxially mounted and built with 0.75-inch silk dome diaphragms that deliver a smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Continuous Power Handling (RMS)
60 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
15 - 100 W / Ch.
System Efficiency
91 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
59 Hz - 22 KHz ± 3 dB
JL Audio
JL AUDIO Coaxial 3-Way Speaker System - C2-690tx
$499.00
The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and precision-engineered woofer designs.
The C2-690tx system features 6 x 9-inch (150 x 230 mm) woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems.
The 6 x 9-inch (150 x 230 mm) format is a direct fit in many vehicles.
The Mid-Range driver is ferrofluid-cooled, with a 2-inch Mylar® cone diaphragm to smoothly bridge the gap between the woofer and the dome tweeter.
Tweeters are mounted next to the mid-range driver and built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. The small size of the C2 tweeter minimizes tweeter protrusion, allowing C2 coaxials to fit behind most factory speaker grilles.
Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo.
Sonic character: Clean and Dynamic
Sold as a pair.
Continuous Power Handling (RMS)
70 W
Peak Music Power
225 W
Recommended Amplifier Power (RMS)
15 - 125 W / Ch.
System Efficiency
93 dB @ 1 W / 1 m
System Nominal Impedance
4 Ω
System Frequency Response
53 Hz - 22 KHz ± 3 dB
JL Audio
JL AUDIO Enclosed Subwoofer System - CP108LG-W3v3
$799.00
This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design.
Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on the front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 - 250WNominal Impedance: 4 Ω
JL Audio
JL AUDIO Enclosed Subwoofer System - CS110TG-TW3
$1,239.00
In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω
JL Audio
JL AUDIO Enclosed Subwoofer System - CS112TG-TW3
$1,419.00
In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 7 in. (178 mm) deep at its base and 4.5 in. (114 mm) at the top.
This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω
JL Audio
JL AUDIO Monoblock Class D Subwoofer Amplifier, 500 W X 1 @ 2 Ω / 250 W X 1 @...
$669.00
Born to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the RD500/1 amplifier was engineered to generate tons of pure subwoofer bliss from a sleek, ultra-compact chassis.
The secret behind its power proficiency is our proprietary NexD™ switching technology, which delivers large amounts of power output with precise efficiency and ultra-low distortion.
For your convenience, the RD500/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ.
Dual-range, differential-balanced inputs are also on-hand, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The RD500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.
With the addition of RBC-1 remote level control (sold separately), you can control the subwoofer output directly from the driver’s seat.
GENERAL SPECIFICATIONS:
Frequency Response 7 Hz – 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >1000 / 50 Hz
Damping Factor @ 2 Ω >500 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 50 A (AFS, AGU or MaxiFuse™)
Height (H): 2.13 in / 54 mm
Width (W): 9.78 in / 248 mm
Depth (D): 6.96 in / 177 mm
JL Audio
JL AUDIO Monoblock Class D Subwoofer Amplifier, 1000 W X 1 @ 2 Ω / 600 W X 1 @...
$989.00
Purpose-built for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD).
At the heart of this ultra-sleek and compact power plant is JL Audio’s exclusive NexD™ Class D technology, permitting high power output with exceptional efficiency and low distortion.
For your convenience, all of the RD1000/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels.
Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. The RD1000/1 is also equipped with an onboard LED-clipping indicator.
This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed.
The RD1000/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition.
Control of the subwoofer level from the driver’s seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).
GENERAL SPECIFICATIONS:
Frequency Response 7 Hz – 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >1000 / 50 Hz
Damping Factor @ 2 Ω >500 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 80 A (AFS, AGU or MaxiFuse™)
Height (H) 2.13 in / 54 mm
Width (W) 14.66 in / 372 mm
Depth (D) 6.96 in / 177 mm
![JL AUDIO Enclosed Subwoofer System With Single 6W3V3-4 Subwoofer Drivers, Black Carpet (150 W, 4 Ω) [Ported Enclosure] - CP106LG-W3v3](http://tjmnorthernbeaches.com.au/cdn/shop/files/CP106LG-W3v3-FRT_fb2eefeb-1b1b-4d48-8389-8b42bc178598_10x.jpg?v=1746157725)
JL Audio
JL AUDIO Enclosed Subwoofer System With Single 6W3V3-4 Subwoofer Drivers, Black Carpet (150 W, 4 Ω) [Ported Enclosure] - CP106LG-W3v3
$709.00
This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems.
The key to its performance lies in the precise tuning of its 6W3v3 subwoofer driver into an efficient slot-ported design.
Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness.
The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
GENERAL SPECIFICATIONS:
Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on the front baffle
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 50 – 150W
Nominal Impedance: 4 Ω
Continuous Power Handling (RMS) 150 W
Enclosure Type Slot-ported, Low-profile
Finish Black carpet
Grille Included Black Steel Mesh
External Width (W) 14.125 in / 359 mm
External Height (H) 9.625 in / 245 mm
External Depth (D1) 5.125 in / 130 mm
Net Weight 12 lb / 5.44 kg
![JL AUDIO Enclosed Subwoofer System With Single 8W3V3-4 Subwoofer Driver, Black Carpet (250 W, 4 Ω) [Ported Enclosure] - CP108LG-W3v3](http://tjmnorthernbeaches.com.au/cdn/shop/files/CP106LG-W3v3-FRT_b948064d-1d23-47c5-b03d-2efd53b04d18_10x.jpg?v=1746157722)
JL Audio
JL AUDIO Enclosed Subwoofer System With Single 8W3V3-4 Subwoofer Driver, Black Carpet (250 W, 4 Ω) [Ported Enclosure] - CP108LG-W3v3
$799.00
This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems.
The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume.
The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal.
GENERAL SPECIFICATIONS:
Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle
A steel mesh grille is included to protect the subwoofer driver
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 100 – 250W
Nominal Impedance: 4 Ω
Continuous Power Handling (RMS) 250 W
Enclosure Type Slot-ported, Low-profile
Finish Black carpet
External Width (W) 18.625 in / 473 mm
External Height (H) 11.0 in / 279 mm
External Depth (D1) 5.125 in / 130 mm
Net Weight 17.40 lb / 7.89 kg
![JL AUDIO Enclosed Subwoofer System With Single 12W6V3-D4 Subwoofer Driver, Dark Gray / Black Carpet (600 W, 2 Ω) [Ported Enclosure] - HO112-W6v3](http://tjmnorthernbeaches.com.au/cdn/shop/files/HO112-W6v3-FRT_d93de69f-65f6-4a48-a7d2-172b303246b5_10x.jpg?v=1746157717)
JL Audio
JL AUDIO Enclosed Subwoofer System With Single 12W6V3-D4 Subwoofer Driver, Dark Gray / Black Carpet (600 W, 2 Ω) [Ported...
$2,129.00
JL Audio’s patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output.
In the HO112-W6v3, the high power handling of the 12W6v3 subwoofer driver, combined with its small enclosure requirements, results in a very compact subwoofer system that is capable of impressive output with moderate amplification.
JL Audio’s patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates just above the woofer, coupling the port output to the woofer’s direct output.
This also provides the necessary surface area and port length to maximize the performance of the W6v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W6v3 and has been fine-tuned through extensive real-world listening.
This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. While no grille is provided, the recessed mounting baffle provides some protection for the woofer.
A steel mesh woofer grille insert can be purchased separately (Model: SGR-12W6v2/v3) if additional woofer protection is desired.
GENERAL SPECIFICATIONS:
Finish: Dark grey, high-grade automotive carpet, with black carpet on woofer baffle
“JL AUDIO” is embroidered in silver on the side surface of the enclosure
Construction: CNC-Cut High-Grade MDF
Recommended amplifier power: 200 – 600W
Nominal Impedance: 2 Ω
Continuous Power Handling (RMS) 600 W
System Nominal Impedance 2 Ω
Enclosure Type Chamber-coupled, slot-ported, rear-firing design
Finish Dark grey carpet with black insert
Grille Included: No
External Width (W) 14.5 in / 368 mm
External Height (H) 16 in / 406 mm
External Depth (D1) 24 in / 610 mm
Net Weight 60.7 lb / 27.52 kg
JL Audio
JL AUDIO Oem Integration Dsp With Automatic Time Correction And Digital Eq (8-Channel Inputs/4-Channel Stereo + 2 Subwoofer Rca Outputs)...
$889.00
The FiX™ 86 is a state-of-the-art digital signal processor engineered to deliver outstanding sound from factory source units while retaining OEM fader control. Unlike typical OEM interface products, the FiX™ 86 automatically corrects time-delayed factory outputs prior to signal summing and EQ correction.
Calibration takes just a single button press and about 30 seconds to complete, with no special equipment needed. With a powerful 24-bit DSP processor and quad 1/3 octave equalizers onboard, complex factory signals, up to the 3-way front and 2-way rear, are combined and level matched automatically into six, full-range stereo signals: Front (fader-controlled), Rear (fader-controlled) and Subwoofer (non-fading, front+rear summed) outputs.
By connecting a PC running TüN™ Software via USB, you can also access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments can be made to input polarity, muting, and filtering, and new calibrations can be initiated from the PC as well.
By clicking on the “TUNE” tab of the TüN™ interface, you can also access four, user-adjustable, 10-band, graphic equalizers to fine-tune the output signals. Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS).
Activation methods include 12-volt or Auto Turn-On (Signal/DC-Offset Sensing) to trigger a dedicated remote turn-on output for aftermarket equipment. An optional DRC-100 or DRC-205 Digital Remote Controller (sold separately) adds Master Volume Control and/or Subwoofer Level Control from the driver’s seat.
Achieving great sound from your factory stereo has never been easier, or sounded better.
GENERAL SPECIFICATIONS:
Power Supply Type Regulated DC-DC SMPS
Input Operating Voltage 10 – 16 VDC
Standby Current Draw <1.5 mA
Operating Current Draw 0.7 A
Recommended Fuse Value 1 A
Input Channels Eight
Input Type Differential-Balanced
Input Voltage Range 250 mV – 30 V RMS
Minimum Input Voltage 10 mV RMS
Input Level Setting Fully automatic
Output Channels Six (Front/Rear/Sub Output Pairs)
Analog Output Unbalanced, stereo RCA jacks
Digital Output N/A
Output Impedance 450 Ω
S/N Ratio 96 dB (A-Weighted, referred to 4V RMS Output)
THD+N @ Rated Output 0.02% (20 Hz – 20 kHz)
Audio Resolution 24 bit / 48 kHz
Number of EQ Bands 30 x 2 channels
EQ Resolution 1/3 octave (25 Hz – 20 kHz)
Remote Level Control Optional (DRC-100 or DRC-200)
Remote Level Functions Master Volume Control, Handsfree Optimization, LED Status Reporting (DRC-205 adds Subwoofer Level Control)
Height (H) 1.85 in / 47 mm
Width (W) 4.29 in / 109 mm
Depth (D) 6.14 in / 156 mm
Net Weight 2.58 lb / 1.17 kg
JL Audio
JL AUDIO Black Steel-Mesh Grille Insert For The 6W3V3 Subwoofer Driver (Sold As Each) - SGRU-6
$49.00
Steel mesh grille insert for the 6W3v3 subwoofer driver. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring.
JL Audio
JL AUDIO Black Steel-Mesh Grille Insert For 10Tw3 Subwoofer Driver (Sold As Each) - SGR-10TW3
$69.00
Steel mesh grille insert for JL Audio 10-inch TW3 subwoofer drivers.
Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish.
The insert is designed to fit snugly onto the woofer’s grille receiver ring.
JL Audio
JL AUDIO Steel-Mesh Grille Insert For 12Tw3 Subwoofer Driver (Sold As Each) - SGR-12TW3
$69.00
Steel mesh grille insert for JL Audio 12-inch TW3 subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer’s grille receiver ring.
JL Audio
JL AUDIO Steel-Mesh Grille Insert For Select 13" 13Tw5, 13Twv2 Subwoofer Drivers (Sold As Each) - SGRU-13
$109.00
Steel mesh grille insert for select JL Audio 13-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer’s grille receiver ring.
![[NLA] JL Audio C1-570x Coaxial Speaker System: 5](http://tjmnorthernbeaches.com.au/cdn/shop/files/C1-570x-1_677a9041-429a-4502-994b-36f4b274d98f_10x.jpg?v=1746157590)
JL Audio
[NLA] JL Audio C1-570x Coaxial Speaker System: 5" x 7" / 6" x 8" (125 mm x 180 mm) Woofer,...
$209.00
C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles.
To facilitate fit, spacer/adaptor rings are included, allowing the C1-570x to be installed in bottom-mount applications. The speaker baskets are also equipped with slotted mounting holes to fit into 6 x 8-inch factory speaker locations.
C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-570x are a proprietary, stamped, steel 5 x 7-inch (125 x 180 mm) oval frame and a DMA-optimized motor system.
A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate.
Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has an inherently excellent off-axis response and high-frequency extension.
It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit.
A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling.
GENERAL SPECIFICATIONS:
Continuous Power Handling (RMS): 50 W
Peak Music Power: 225 W
Recommended Amplifier Power (RMS): 10 – 75 W / Ch.
System Efficiency: 90.5 dB @ 1 W / 1 m
System Nominal Impedance: 4 Ω
System Frequency Response: 40 Hz – 24 kHz ± 3 dB
Frame Outer Diameter* (A): 5.50 x 7.63 in / 140 x 194 mm
Grille Tray Outer Diameter (B): N/A
Motor Outer Diameter (C): 2.76 in / 70 mm
Frontal Coaxial Tweeter Protrusion** (D): 0.46 in / 12 mm
Frontal Grille Protrusion (E): N/A
Mounting Hole Diameter (F): N/A
Mounting Depth (G): 2.46 in / 63 mm
FOCAL
FOCAL Sub 12 Single Coil Subwoofer - SUB 12
$330.00
Designed and developed in France, the Sub 12 Slim benefits from Focal’s sound savoir-faire. With its 12” (30cm) polypropylene cone, this subwoofer provides an excellent bass boost for any on-board audio system. It has a single voice coil architecture for simplicity and efficacy. With a very shallow depth, this product is easily installed into restricted spaces such as the sides of a car boot.
Key points• Shallow depth; easy to install• A deep and powerful bass• Efficacy as sealed box, from 15L• Robust design; steel chassis• Excellent power handling
JL Audio
JL AUDIO W0V3 10-Inch Subwoofer Driver - 10W0v3-4
$229.00
The 10W0v3 is a rugged performer with excellent excursion capability and linearity and an overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
JL Audio
JL AUDIO W0V3 12-Inch Subwoofer Driver - 12W0v3-4
$269.00
The 12W0v3 is a rugged performer with excellent efficiency, excursion capability and linearity. The overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability.
The 12W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
JL Audio
JL AUDIO W3V3 6.5-Inch Subwoofer Driver - 6W3v3-4
$529.00
If you need a small-format subwoofer that really delivers in extremely small enclosures, this is where your search ends. The 6W3v3 is a true subwoofer, through-and-through. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.35 in. (8.9 mm) one-way linear excursion.
The 6W3v3-4 is best used with amplifier power in the 50W - 150W range and is optimized to operate in a tiny 0.15 cu. ft. (4.2 l) sealed enclosure, or a 0.25 cu. ft. (7.1 l) ported enclosure.
Continuous Power Handling (RMS)
150 W
Recommended Amplifier Power (RMS)
50 - 150 W
Nominal Impedance (Znom)
4 Ω
JL Audio
JL AUDIO W3V3 8-Inch Subwoofer Driver - 8W3v3-4
$619.00
If you need an 8-inch subwoofer that can create outstanding bass in extremely small enclosures, the 8W3v3 will do the job and surprise you with its power and accuracy. It employs the same technologies as its larger diameter brethren to deliver a whopping 0.375 in. (10 mm) of controlled, one-way, linear excursion.
The 8W3v3-4 is best used with amplifier power in the 75W - 250W range and is optimized to operate in a tiny 0.30 cu. ft. (8.5 l) sealed enclosure, or a 0.35 cu. ft. (9.9 l) ported enclosure.
Continuous Power Handling (RMS)
250 W
Recommended Amplifier Power (RMS)
75- 250 W
Nominal Impedance (Znom)
4 Ω
JL Audio
JL AUDIO W3V3 10-Inch Subwoofer Driver - 10W3v3-2
$709.00
This acclaimed subwoofer driver strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
JL Audio
JL AUDIO W3V3 10-Inch Subwoofer Driver - 10W3v3-4
$709.00
This acclaimed subwoofer driver strikes an outstanding balance in power handling, enclosure requirements and excursion to deliver excellent results in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 10W3v3 to enhance linearity and reliability.
The 10W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 0.625 cu. ft. (17.7 l) sealed enclosure, or a 1.25 cu. ft. (35.4 l) ported enclosure.
Continuous Power Handling (RMS)
500 W
Recommended Amplifier Power (RMS)
150- 500 W
Nominal Impedance (Znom)
2 Ω
JL Audio
JL AUDIO W3V3 12-Inch Subwoofer Driver - 12W3v3-2
$799.00
This powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.
The 12W3v3-2 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.25 cu. ft. (35.4 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
Continuous Power Handling (RMS)
500 W
Recommended Amplifier Power (RMS)
150 - 500 W
Nominal Impedance (Znom)
2 Ω
JL Audio
JL AUDIO W3V3 12-Inch Subwoofer Driver - 12W3v3-4
$799.00
This powerhouse 12-inch driver delivers potent performance and world-class sound quality in medium power applications. Several exclusive JL Audio technologies and proprietary assembly techniques are applied to the 12W3v3 to enhance linearity and reliability.
The 12W3v3-4 is best used with amplifier power in the 150W - 500W range and is optimized to operate in a compact 1.125 cu. ft. (31.8 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.
Continuous Power Handling (RMS)
500 W
Recommended Amplifier Power (RMS)
150 - 500 W
Nominal Impedance (Znom)
4 Ω
JL Audio
JL AUDIO Tw3 10-Inch Subwoofer Driver - 10TW3-D4
$889.00
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of a greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-moulded cone body. This structure supports the voice coil and a full annular spider while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing subwoofer drivers.
Deep, powerful and accurate JL Audio bass is now possible in more applications than ever.
Continuous Power Handling (RMS)
400 W
Recommended Amplifier Power (RMS)
200 - 400 W
Nominal Impedance (Znom)
Dual 4 Ω
JL Audio
JL AUDIO Tw3 12-Inch Subwoofer Driver - 12TW3-D4
$979.00
Building on the core technology of our TW5 thin-line subwoofers, the TW3’s deliver a powerful combination of shallow mounting depth and excursion capability. In fact, they are capable of a greater excursion than the W3v3’s.
To allow this remarkable feat to be achieved, JL Audio’s patented thin-line woofer technology compresses the architecture of the TW3’s using a “concentric tube” structure built into the injection-moulded cone body. This structure supports the voice coil and a full annular spider while permitting the placement of the large motor structure further forward in the speaker than with conventional designs.
TW3’s are optimized for small enclosures and offer our tab-ear mounting design to maximize cone area within their mounting footprints. We know you’re going to love working with these amazing subwoofer drivers.
Continuous Power Handling (RMS)
400 W
Recommended Amplifier Power (RMS)
200 - 400 W
Nominal Impedance (Znom)
Dual 4 Ω
Optima
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA
$379.00
$600.00
Optima Battery D34 YellowTop Deep Cycle 12V AGM 750 CCA (Free Postage)
The Yellow Top battery is the result of four decades of technological innovation and engineering. Like Optima's Red Top and Blue Top batteries, the battery features Optima's "Six Pack." The AGM design features spiral cells filled with highly absorbent, fine fiberglass mats.
Handles Heavy Loads
The Yellow Top battery delivers vital power when there are high electrical loads. Sometimes, demand exceeds alternator capacity. It's an excellent choice for vehicles loaded with accessories. For example, the Yellow Top delivers the power needed to meet the demands of an aftermarket audio system with extra amplifiers. When there's a substantial draw of electrical current, the Optima Yellow Top delivers the superior performance you need. Heavy loads often deplete traditional flooded lead-acid batteries to the point that they never recover.
You can also count on the Yellow Top battery to meet regular starting and operational needs.
Excellent No-alternator Solution
The deep-cycle battery is the perfect choice when there is no alternator. For example, competitive racers love the Yellow Top. They use it in ultra-lightweight hill-climb cars, drag cars and motorkhana specials. Also, the Yellow Top is up to 15 times more resistant to vibration than traditional flooded designs. This is a big plus in typical racing conditions. Extreme enthusiasts trust the Yellow Top when a power failure is not an option.
This deep-cycle design offers other important advantages. Count on the Yellow Top to perform across the wide range of Australia's weather extremes. Enjoy the superior performance you require during winters in Melbourne and summers in Sydney.
The Yellow Top battery delivers up to three times the battery life of certain competitors. The maintenance-free design is good for more than 300 discharge and recharge cycles. Better yet, the AGM design is virtually spill-proof. It is possible to mount the Yellow Top in almost any position.
Invest in the Yellow Top, a high-performing AGM battery from Optima, an industry leader in advanced battery technology. Its best-in-class material purity outperforms competing lead alloy models.
The Yellow Top deep-cycle battery delivers reliable power every day and everywhere.
Features
Voltage: 12v
Terminal: SAE
Assembly: LHP
CCA 750
AH 55
L 254 x W 173 x H 199 mm
Deep-cycle and cranking power
Up to 3X longer life
15 times more vibration-resistant
Virtually spillproof
Mountable in virtually any position
Maintenance-free
Faster recharging
Optimal starting power
300+ discharge/recharge cycles
8012-254
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
