Torqit
TORQIT Pedal Torq To Suit Toyota Fj Cruiser, Hilux & Prado - PT1022
$395.01
$438.90
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
Front Runner
FRONT RUNNER Toyota Fj Cruiser Slimline Ii Roof Rack Kit - KRTF020T
$1,957.50
$2,175.00
This 1964mm/77.3" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota FJ Cruiser. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTF020T - Toyota FJ Cruiser Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF004 - Toyota FJ Cruiser Foot Rails - by Front Runner1 x RRSTD10 - Slimline II Tray - 1255mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 35kg (76lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 40.2kg (88.5lbs)
Front Runner
FRONT RUNNER Toyota Fj Cruiser Slimline Ii 1/2 Roof Rack Kit - KRTF021T
$1,435.50
$1,595.00
This 1156mm/45.5" long 1/2 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota FJ Cruiser. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF021T - Toyota FJ Cruiser Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF004 - Toyota FJ Cruiser Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (61lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.4kg (71.2lbs)
Polyair
POLYAIR Standard Red Series Airbag Kit, Toyota Fj Cruiser - 12895
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Kia - Sorento 2007 - 2009
Toyota - FJ Cruiser 2010-2016
Toyota - Prado 120 / 150 series
Polyair
POLYAIR 3" Lift Ultimate Airbag Kit, Toyota Fj Cruiser - 12095ULT
$387.00
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Prado 120 / 150 series
Polyair
POLYAIR 3" Lift Red Series Airbag Kit, Toyota Fj Cruiser - 12095
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Kia - Sorento 2007 - 2009
Toyota - FJ Cruiser 2010-2016 Toyota - Prado 120 / 150 series
Polyair
POLYAIR 2" Lift Red Series Airbag Kit, Toyota Fj Cruiser - 12995
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Kia - Sorento 2007 - 2009
Toyota - FJ Cruiser 2010-2016 Toyota - Prado 120 / 150 series
MSA
MSA Toyota Fj Cruiser Rear Dual Cab 60/40 Bench Seat Cover - TFJ04
$297.90
$331.00
Rear Dual Cab 60/40 Bench (MTO)
Year: 03/11-Current
Model: FJ Cruiser
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
Torqit
TORQIT Pedal Torq Plus To Suit Toyota Fj Cruiser, Hilux & Prado - PTP1022
$593.01
$658.90
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
