Polyair
POLYAIR Standard Red Series Airbag Kit, Toyota Surf / 4Runner - 19896
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Surf / 4-Runner, KZN130, 1988 - 1997, COIL REAR SUSP
Polyair
POLYAIR Standard Red Series Airbag Kit, Toyota Surf / 4Runner - 15690
$319.50
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Surf / 4-Runner, KZN130, 1988 - 1997, COIL REAR SUSP
Front Runner
FRONT RUNNER Toyota 4Runner (5Th Gen) (2010-Current) Slimsport Roof Rack Kit / Lightbar Ready - KSTF002T
$1,445.40
$1,606.00
KSTF002T - Toyota 4Runner 5th Gen (2010-Current) Slimsport Roof Rack Kit / Light Bar Ready - by Front Runner
This low-profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") x 1181mm (46.5").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately).
Included in the Toyota 4Runner (2010-2024) Slimsport is a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:1x KSTF001 - Toyota 4Runner (2010-2024) SlimSport Roof Rack Kit1x RRAC195 - Toyota4Runner Slimsport Rack 40" LBar Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.95kg (88.07lbs)Assembled Rack Kit Dimensions:2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") HThe t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 210mm (8")Shipping Weight:Weight: 41kg (90lbs)
This product is compatible with the following vehicles:
Toyota4Runner5th Gen N280 2010-2024
Front Runner
FRONT RUNNER Toyota 4Runner (3Rd Gen) Slimline Ii Roof Rack Kit - KRTF058T
$1,545.30
$1,717.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Toyota 4Runner contains the Slimline II Tray, Wind Deflector, 2 Tracks and six (6) Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
KRTF058T - Toyota 4Runner (3rd Gen) Slimline II Roof Rack Kit
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)1x TRAC010 - Universal Track Non Drilled / 1800mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.45kg (51.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18")Length: 1830mm (72")Height: 280mm (11")
Shipping Weight:Weight: 29kg (64lbs)
Front Runner
FRONT RUNNER Toyota 4Runner (5Th Gen) 3/4 Slimline Ii Roof Rack Kit - KRTF050T
$1,543.50
$1,715.00
This 1560mm/61.4" long 3/4 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (5th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*
Front Runner
FRONT RUNNER Toyota 4Runner 5Th Gen Ditch Mount A-Pillar Light Brackets - VACC035
$44.10
$49.00
Durable spot light mounts for your Toyota 4Runner 5th Gen.
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
Features
Consists of:
2 x Toyota 4Runner 5th Gen Ditch Mount Light Brackets
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
171mm (6.7") L x 125mm (4.9") W x 72mm (2.8") H
Weight:
1kg (2.2lbs)
Front Runner
FRONT RUNNER Toyota 4Runner (2009-Current) Slimsport Rack 40In Light Bar Wind Fairing - RRAC195
$152.10
$169.00
Lightbar wind fairing for Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit / Lightbar ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Slimsport Rack 40" Light Bar Wind Fairing
1 x Protection Strip
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1175mm (46.3") L x 171mm (2.8") W x 170mm (6.7") H
Weight:
2.37kg (5.2lbs)
Front Runner
FRONT RUNNER Toyota 4Runner (2009-Current) Slimsport Rack Wind Fairing - RRAC234
$152.10
$169.00
A wind fairing for the Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota 4Runner Slimsport Rack Wind Fairing
1 x Protection Strip
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1175mm (46.3") L x 182mm (7.2") W x 114mm (4.5") H
Weight:
2.93kg (6.6lbs)
Front Runner
FRONT RUNNER Slimline Ii Roof Rack Kit Fits Toyota 4Runner 4Th Gen - KRTF051T
$1,741.50
$1,935.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (4th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF051T - Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 34.4kg (75.7lbs)
Front Runner
FRONT RUNNER Slimsport Roof Rack Kit Fits Toyota 4Runner 5Th Gen 2010-On - KSTF003T
$1,445.40
$1,606.00
This low profile flat deck Slimsport rack has a load carrying area of 2228mm (87.7") L x 1181mm (46.5").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Toyota 4Runner (2009-Current) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Uses factory fixing points with no drill required front foot as standard but also includes hardware included for drill option (recommended).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTF003T - Toyota 4Runner (5th Gen) (2010-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota 4Runner (2010-Current) Slimsport Roof Rack Kit
1 x RRAC234 - TOYOTA4RUNNER SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37kg (81.57lbs)
Assembled Rack Kit Dimensions:
2228mm (87.7") L x 1181mm (46.5") W x 121mm (4.7") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
