DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Mitsubishi Triton Mv...
$558.00
$620.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB652DPK fits Mitsubishi Triton MV 4N16 (2024 – On) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Isuzu D-Max &...
$496.80
$552.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Transmission Cooler Kit Ford Ranger, Everest Pxiii Bi-Turbo...
$704.70
$783.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit For D-Max &...
$598.50
$665.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Nissan Navara Np300...
$551.70
$613.00
The NEW & IMPROVED 32mm 14 row Arctic Black TransChill Transmission Oil Cooler Kit (TCB630DPK) suits the Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015- On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
Pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
75% more performance than a comparable tube and fin design (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Australian Made vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
Locally designed and packed with all the mounting hardware required for a DIY installation
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Transmission Cooler Kit Toyota Hilux N80 () -...
$496.80
$552.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Toyota Prado 150...
$492.30
$547.00
The TransChill Arctic Black Transmission cooler kit TCB620DPK fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
TORQIT Ford Ranger Next Gen 2.0L Power Module – CRMQ2012
$1,890.00
Performance Gain: Up to 36kW / 91Nm
Unlock the full potential of your Ford Ranger Next Gen 2.0L with the TORQIT Power Module (CRMQ2012). Specifically engineered for the latest Ranger platform, this advanced plug-and-play performance module safely delivers increased power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, extracting more usable power from every drop of fuel. The result is stronger acceleration, improved throttle response and smoother power delivery whether you're driving around town, touring or heading off-road.
For drivers who regularly tow caravans, trailers, boats or work equipment, the additional torque reduces engine strain and provides greater pulling power when it matters most. You'll enjoy improved drivability, better towing performance and increased confidence on steep climbs and long highway journeys.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 36kW & 91Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific tuning for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Ford Raptor Next Gen 3.0L Power Module – CRMQ2011
$1,890.00
Performance Gain: Up to 38kW / 82Nm
Unlock the full performance of your Ford Ranger Raptor Next Gen 3.0L with the TORQIT Power Module (CRMQ2011). Purpose-built for the latest Ranger Raptor, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
Designed to maximise engine efficiency, the TORQIT Power Module optimises the air-to-fuel ratio to extract more usable energy from every drop of fuel. The result is stronger acceleration, sharper throttle response and smoother power delivery, giving you greater confidence both on the road and across challenging off-road terrain.
Whether you're towing a caravan, trailer, boat or carrying heavy loads, the additional torque helps minimise engine strain while improving overall drivability. From daily commuting to weekend adventures, you'll benefit from enhanced pulling power, improved responsiveness and a more refined driving experience.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 38kW & 82Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific tuning for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Ford Ranger Super Duty (2025+) Power Module – CRMQ2072
$1,890.00
Performance Gain: Up to 29kW / 81Nm
Take your Ford Ranger Super Duty V6 (2025+) to the next level with the TORQIT Power Module Plus (CRMQ2072). Engineered specifically for the latest Ranger Super Duty, this advanced plug-and-play performance module safely increases power, torque and fuel efficiency while maintaining factory safety parameters.
Unlike conventional performance modules, the TORQIT Power Module Plus features an innovative dual-plug design that optimises both fuel pressure and boost pressure. This delivers stronger mid-range performance, improved throttle response and smoother acceleration, giving you more confidence whether you're commuting, touring or tackling demanding off-road terrain.
Designed to maximise the energy extracted from every drop of fuel, the Power Module Plus enhances your engine's air-to-fuel ratio for improved efficiency and drivability. The additional torque also helps reduce engine strain when towing heavy loads, making it ideal for caravans, trailers, boats and work equipment.
As Australia's first Bluetooth-enabled diesel performance module, the TORQIT Power Module Plus allows you to switch between performance modes directly from your smartphone using the TORQIT app. Choose between Fuel Economy, Standard or Maximum Performance settings, while enjoying the convenience of remote software updates and ongoing performance enhancements.
Why Choose the TORQIT Power Module Plus?
Performance Gain: Up to 29kW & 81Nm*
Advanced dual-plug technology for fuel and boost pressure optimisation
Bluetooth connectivity with smartphone app control
Switch between Fuel Economy, Standard and Maximum Performance modes
Plug-and-play installation with no permanent vehicle modifications
Improves power, torque, throttle response and drivability
Reduces engine strain when towing caravans, trailers, boats and horse floats
Vehicle-specific software with remote firmware updates
Circuitry manufactured in Germany
Developed and rigorously tested for Australian conditions
Backed by a 5-year manufacturer's warranty, including New Vehicle Warranty coverage*
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications. Warranty coverage is subject to TORQIT's terms and conditions.
TORQIT Nissan Navara NP300 (Post-2019) Power Module – CRMQ2008
$1,890.00
Performance Gain: Up to 34kW / 75Nm
Upgrade your Nissan Navara NP300 (Post-2019) with the TORQIT Power Module (CRMQ2008), a premium plug-and-play performance module engineered to deliver increased power, torque and fuel efficiency. Designed specifically for the latest Navara NP300 models, it safely optimises your vehicle's factory ECU calibration without requiring permanent modifications.
By refining the engine's air-to-fuel ratio, the TORQIT Power Module extracts more usable energy from every drop of fuel, resulting in stronger acceleration, sharper throttle response and smoother power delivery. Whether you're commuting, exploring off-road tracks or using your Navara for work, you'll enjoy improved drivability and a more responsive driving experience.
For drivers who regularly tow caravans, trailers, boats or heavy equipment, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long-distance trips. The plug-and-play design allows for quick installation while maintaining your vehicle's factory integrity.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 34kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Isuzu NPS Power Module – CRMQ2070
$1,890.00
Performance Gain: Up to 42kW / 91Nm
Unlock the full performance potential of your Isuzu NPS with the TORQIT Power Module (CRMQ2070). Designed specifically for the Isuzu NPS platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module enhances your engine's air-to-fuel ratio to maximise combustion efficiency, producing stronger acceleration, improved throttle response and smoother power delivery. By extracting more energy from every drop of fuel, it delivers increased performance while maintaining the reliability your Isuzu NPS is built for.
Whether your NPS is used for commercial transport, touring or towing heavy loads, the additional power and torque help reduce engine strain and improve drivability in demanding conditions. From steep inclines to fully loaded highway driving, you'll benefit from greater pulling power and improved engine responsiveness.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 42kW & 91Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for commercial applications, caravans, trailers and heavy-duty towing
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Ford Ranger Next Gen V6 Power Module – CRMQ2010
$1,890.00
Performance Gain: Up to 56kW / 67Nm
Unlock the full capability of your Ford Ranger Next Gen V6 with the TORQIT Power Module (CRMQ2010). Designed specifically for the latest V6 Ranger, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU signals—without requiring ECU remapping.
Installed inline with your vehicle's factory sensors, the TORQIT Power Module fine-tunes engine performance while preserving your factory settings. By optimising the air-to-fuel ratio, it extracts more energy from every drop of fuel, delivering stronger acceleration, improved throttle response and smoother power delivery throughout the rev range.
Whether you're towing a caravan, trailer, boat or carrying heavy work equipment, the additional power and torque reduce engine strain while providing greater pulling power and improved drivability. Best of all, the module can be removed at any time without permanently modifying your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 56kW & 67Nm*
Simple plug-and-play installation with no ECU remapping required
No permanent modifications to your vehicle
Can be removed without affecting factory ECU settings
Increases power, torque and throttle response
Improves fuel efficiency through optimised engine performance
Vehicle-specific calibration for safe and reliable operation
Reduces engine strain when towing caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Mazda BT-50 4JJ3 (Post-2020) Power Module – CRMQ2009
$1,890.00
Performance Gain: Up to 31kW / 61Nm
Enhance the performance of your Mazda BT-50 4JJ3 (Post-2020) with the TORQIT Power Module (CRMQ2009). Specifically engineered for the latest BT-50 platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, improved throttle response and smoother power delivery across the entire rev range. By extracting more usable energy from every drop of fuel, you'll enjoy improved performance without compromising everyday reliability.
Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque helps reduce engine strain and provides greater pulling power when you need it most. From daily driving to off-road adventures, the TORQIT Power Module delivers a more responsive and enjoyable driving experience.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 31kW & 61Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Improves power, torque and throttle response
Enhances fuel efficiency through optimised engine performance
Vehicle-specific tuning for safe and reliable operation
Reduces engine strain when towing caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Isuzu D-MAX 4JJ3 3.0L (Post-2020) Power Module – CRMQ2006
$1,890.00
Performance Gain: Up to 36kW / 75Nm
Boost the performance of your Isuzu D-MAX 4JJ3 3.0L (Post-2020) with the TORQIT Power Module (CRMQ2006). Specifically engineered for the latest 3.0L turbo diesel D-MAX, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes your engine's air-to-fuel ratio to maximise combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery across the rev range. By extracting more usable energy from every drop of fuel, it enhances everyday drivability while maintaining the reliability expected from the Isuzu 4JJ3 engine.
Whether you're towing a caravan, trailer, boat or carrying heavy loads for work, the additional torque reduces engine strain and provides greater pulling power when you need it most. From daily commuting to off-road adventures, the TORQIT Power Module delivers a noticeable improvement in performance without requiring permanent vehicle modifications.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 36kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing caravans, trailers, boats and heavy loads
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Nissan Navara NP300 (Pre-2019) Power Module – CRMQ2007
$1,890.00
Performance Gain: Up to 34kW / 75Nm
Unlock more power from your Nissan Navara NP300 (Pre-2019) with the TORQIT Power Module (CRMQ2007). Designed specifically for pre-2019 NP300 models, this advanced plug-and-play performance module safely enhances power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module refines your engine's air-to-fuel ratio to maximise combustion efficiency, allowing your Navara to produce more usable power while using fuel more effectively. The result is quicker throttle response, stronger acceleration and smoother power delivery for everyday driving, off-road adventures and demanding work applications.
Whether you're towing a caravan, trailer, boat or carrying heavy equipment, the additional torque helps reduce engine strain while improving towing performance and overall drivability. With a simple plug-and-play installation and no permanent modifications required, it's an easy upgrade that delivers noticeable performance improvements.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 34kW & 75Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and horse floats
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Ineos Grenadier (2025+) Power Module – CRMQ2073
$1,890.00
Performance Gain: Up to 33kW / 84Nm
Maximise the capability of your Ineos Grenadier (2025+) with the TORQIT Power Module (CRMQ2073). Purpose-built for the latest Grenadier platform, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By extracting more usable energy from every drop of fuel, it enhances both on-road refinement and off-road performance while maintaining factory reliability.
Whether you're tackling remote touring, technical off-road tracks or towing a caravan, trailer or boat, the additional power and torque provide greater pulling performance while reducing engine strain under load. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 33kW & 84Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing caravans, trailers, boats and heavy loads
Ideal for touring, off-road adventures and everyday driving
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Tundra Power Module – CRMQ2060
$1,890.00
Performance Gain: Up to 31kW / 85Nm
Unlock the full potential of your Toyota Tundra with the TORQIT Power Module (CRMQ2060). Specifically engineered for the Toyota Tundra, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
By refining the engine's air-to-fuel ratio, the TORQIT Power Module improves combustion efficiency to deliver stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is a more responsive driving experience with enhanced performance for both everyday driving and demanding towing applications.
Whether you're towing a large caravan, boat, horse float or heavy trailer, the additional torque helps reduce engine strain while providing greater pulling power and improved confidence on steep inclines and long highway journeys. Installation is completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 31kW & 85Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats and commercial towing applications
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota Hilux 2.8L D4D (2016–2018) Power Module – CRMQ2005
$1,890.00
Performance Gain: Up to 34kW / 77Nm
Enhance the capability of your Toyota Hilux 2.8L D4D (2016–2018) with the TORQIT Power Module (CRMQ2005). Specifically engineered for the 2.8L D4D turbo diesel engine, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module precisely adjusts the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. By unlocking additional performance while maintaining factory reliability, it transforms the way your Hilux performs both on and off the road.
Whether you're towing a caravan, trailer or boat, carrying heavy tools for work, or heading off-road, the increased torque helps reduce engine strain and provides greater pulling power when it matters most. Installation is completely plug-and-play, with no permanent modifications required.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 34kW & 77Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for caravans, trailers, boats, off-road touring and work vehicles
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
TORQIT Toyota LandCruiser 300 Series (2016+) Power Module – CRMQ2002
$1,890.00
Performance Gain: Up to 47kW / 104Nm
Transform the performance of your Toyota LandCruiser 300 Series (2016+) with the TORQIT Power Module (CRMQ2002). Engineered specifically for the LandCruiser 300 Series, this premium plug-and-play performance module safely increases power, torque and fuel efficiency by optimising your vehicle's factory ECU calibration.
The TORQIT Power Module fine-tunes the engine's air-to-fuel ratio to improve combustion efficiency, delivering stronger acceleration, sharper throttle response and smoother power delivery throughout the rev range. The result is noticeably improved drivability while maintaining the reliability and refinement expected from the LandCruiser platform.
Whether you're towing a large caravan, horse float or boat, exploring Australia's toughest off-road terrain, or covering long-distance touring kilometres, the substantial increase in power and torque reduces engine strain and provides greater confidence under load. Installation is quick and completely plug-and-play, requiring no permanent modifications to your vehicle.
Why Choose the TORQIT Power Module?
Performance Gain: Up to 47kW & 104Nm*
Simple plug-and-play installation with no permanent vehicle modifications
Optimises fuel efficiency while increasing power and torque
Improves throttle response and overall drivability
Vehicle-specific calibration for safe and reliable performance
Reduces engine strain when towing heavy loads
Ideal for touring, towing, off-road adventures and everyday driving
Developed and rigorously tested for Australian driving conditions
Backed by a 5-year manufacturer's warranty
*Performance gains may vary depending on vehicle condition, fuel quality and supporting modifications.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
