
Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-CURRENT) SLIMSPORT RACK 40 LIGHT BAR WIND FAIRING RRAC192
$111.00
$123.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Toyota Tacoma (2005-2023) Slimsport Roof Rack Kit / Lightbar ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 5'6 (2007-CURRENT) DOUBLE LOAD BAR KIT KRTT972
$572.00
$636.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Toyota Tacoma when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 155mm (6")Shipping Weight:Weight: 9kg (20lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 5 (2005-CURRENT) DOUBLE LOAD BAR KIT KRTT970
$536.00
$596.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Toyota Tacoma when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTT970 - Toyota Tacoma ReTrax XR 5" (2005-Current) Double Load Bar Kit - by Front RunnerConsisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 170mm (7")Length: 1540mm (61")Height: 160mm (6")Shipping Weight:Weight: 9kg (20lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 5 (2005-CURRENT) TRIPLE LOAD BAR KIT KRTT965
$805.00
$895.00
This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Toyota Tacoma when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 5 (2005-CURRENT) SLIMLINE II LOAD BED RACK KIT KRTT961T
$1,696.00
$1,885.00
This kit creates a full-size rack that sits above your Toyota Tacoma’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
KRTT961T - Toyota Tacoma ReTrax XR 5" (2005-Current) Slimline II Load Bed Rack KitConsisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.54kg (56.31lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1730mm (68")Length: 440mm (17")Height: 240mm (9")Shipping Weight:Weight: 30kg (66lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-CURRENT) LOAD BED LOAD BARS KIT KRTT901T
$507.00
$563.00
This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005+
This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005+
If you don’t currently need a complete Slimline II tray mounted in your bed, but still want off-road rated, durable cargo space for a bicycle, roof top tent, kayak, or other adventure accessories, a Front Runner Load Bar Kit is the solution. This Front Runner Load Bar Kit works with the existing Tacoma factory bed rails.This Load Bar Kit contains a pair of 1425mm wide Front Runner Load Bars, 2 pair of Front Runner Load Bed Legs, and all the hardware necessary to mount to the factory bed rails in Tacomas 2005 +DID YOU KNOW? These load bars can be used as slats in a similar width Slimline II Roof Rack. When you buy Front Runner Load Bars you are one step closer to owning a Front Runner Slimline II Roof Rack!The Front Runner Load Bar Kit is ideal for mounting accessories to your vehicle when a strong, lightweight, low profile, smaller footprint is preferred.The Front Runner Load Bar Kits utilize the same 22mm thick HD aluminium extrusions (slats) used in the Slimline II Roof Rack.The sliding nut t-slots on the slats allow unlimited, ultra secure mounting positions as well as quick removal of accessories and equipment.Accessories can be mounted to t-slots on the top and bottom of the Load Bars.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTT901T - Toyota Tacoma (2005-Current) Load Bed Load Bars Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 7kg (15lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 130mm (5")Length 1270mm (50")Height 240mm (9")
Shipping Weight:
Weight 7.9kg (17.4lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA DOUBLE CAB (2024-CURRENT) SLIMLINE II ROOF RACK KIT KRTT013T
$1,428.00
$1,587.00
This 1358mm/53.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma Double Cab. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount table (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRTT013T - Toyota Tacoma Double Cab (2024-Current) Slimline II Roof Rack KitConsisting of:1x FATT013 - Toyota Tacoma Double Cab (2024-Current) Foot Rails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 23.74kg (52.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 31kg (68lbs)

Front Runner
Front Runner Toyota Tacoma 4th Gen Double Cab (2024-Current) Slimsport Rack 40in Light Bar Wind...
$161.00
$179.00
Get your Toyota Tacoma Double Cab ready for camping and overland adventures with the dynamic and functional Slimsport Roof Rack Kit; its clever design allows for the fitment of a 40” lightbar for after-dark adventures, while the included wind fairing will keep the noise levels (and fuel consumption) right down.
Lightbar wind fairing for Toyota Tacoma 4th Gen Double Cab (2024-Current) Slimsport Roof Rack Kit / Lightbar ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Wind FairingHardware KitFitment Guide
Materials used:Black powder-coated mild steel
Product Dimensions:75mm (3") L x 1195mm (47.1") W x 200mm (7.9") H
Weight:3.05Kg (6.7lbs)

Front Runner
Front Runner Toyota Tacoma (2005-Current) Slimsport Rack Wind Fairing -RRAC231
$111.00
$123.00
A wind fairing for the Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tacoma Slimsport Rack Wind Fairing
1 x Protection Strip
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
1185mm (46.7") L x 170mm (6.7") W x 141mm (5.6") H
Weight:
3.2kg (7.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-2023) SLIMLINE II ROOF RACK KIT / LOW PROFILE -KRTT005T
$1,276.00
$1,418.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Tacoma 2005+. Easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit will allow your sunroof to open completely, but it will not allow the sunroof to be operated in tilt/vent mode. If you would like to operate the sunroof in tilt/vent mode, you can use Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit, provided that you do not mount a table underneath.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT005T - Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT004 - Toyota Tacoma (2005-Curr) Foot Rails/Low Profile1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.51kg (54.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 240mm (9")
Shipping Weight:
Weight: 24.53kg (54lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2015-2023) 6' BED ALU-CAB CONTOUR CANOPY SLIMLINE II RACK KIT -KRCA095T
$1,895.00
$2,106.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Contour Canopy. The rack size is approximately 1345mm/53" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Contour Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.03kg (64lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 34kg (75lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2015-2023) 6' BED ALU-CAB EXPLORER CANOPY SLIMLINE II RACK KIT -KRCA096T
$1,800.00
$2,000.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Explorer Canopy . The rack size is approximately 1255mm/49.4" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Explorer Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.36kg (60.32lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 170mm (7")Shipping Weight:Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-2023) SLIMSPORT ROOF RACK KIT -KSTT003T
$1,053.00
$1,170.00
This low profile flat deck Slimsport rack has a load-carrying area of 1420mm (55.9") x 1197mm (47.1").
The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
Easily add on the Rack Accessory Mounting Bracket (RRAC182 sold separately) for all Front Runner side mount accessories.
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing RRAC192 (sold separately) has a 40" cutout to allow use of LIGH199 (sold separately).
Fitment guide and all mounting hardware included.
Note: No drilling required
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTT003T - Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit - by Front Runner
Consisting of:
1 x Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit
1 x RRAC231 - TOYOTA TACOMA SLIMSPORT RACK WIND FAIRING
Installation Hardware
Fitting Instructions
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 142mm (5.5") H
Approximate Installed Weight: 26.57kg (58.58lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 160mm (6")
Shipping Weight:
Weight: 26.57kg (58lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-2023) SLIMSPORT ROOF RACK KIT / LIGHTBAR READY -KSTT002T
$1,053.00
$1,170.00
Fits to existing factory holes with factory rails removed.
Low-profile flat deck Slimsport rack has a load carrying area of 1420mm (55.9") x 1197mm (47.1").
Sleek side rails have integrated mounting feet with additional brace brackets for added strength.
High-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Included in the Toyota Tacoma (2005-Current) Slimsport is a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
Note: Under Rack Tables are not compatible with the Slimsport rack kit range
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSTT002T - Toyota Tacoma (2005-Current) Slimsport Roof Rack Kit / Lightbar ready - by Front Runner
Consisting of:
1x KSTT001 - Toyota Tacoma (2005-Curr) SlimSport Roof Rack Kit
1x RRAC192 - Toyota Tacoma Slimsport Rack 40" LBar Wind Fairing
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
1420mm (55.9") L x 1197mm (47.1") W x 142mm (5.5") H
Approximate Installed Weight: 30.15kg (66.47lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 210mm (8")
Shipping Weight:
Weight: 31kg (68lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 6IN (2005-CURRENT) DOUBLE LOAD BAR KIT -KRTT971
$536.00
$596.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT971 - Toyota Tacoma ReTrax XR 6" (2005-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6kg (13.23lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1500mm (59"); Height: 155mm (6")
Shipping Weight:
Weight: 8kg (18lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA UTE (2005-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRTT900T
$1,524.00
$1,693.00
This kit creates a full size rack that sits above your Toyota Tacomas (2005 + w/OEM bed rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)) and 4 Pickup Truck Bed Universal Legs that fit into the existing factory/OEM bed tracks. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Due to load limitations of the factory bed tracks, we do NOT advise loading more than 150 lbs (68 kg). While Front Runner racks and mounting systems have been engineered and built to hold 660 lbs/299kgs, this may exceed your vehicle manufacturers recommendations. Until all vehicle components are made as off-road tough as Front Runners, we suggest contacting your vehicle maker to check load limits before aggressive loading of the rack.
Features
KRTT900T - Toyota Tacoma Pick-Up Truck (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (53lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 27.8kg (61.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA DC 4-DOOR UTE (1995-2000) SLIMLINE II LOAD BED RACK KIT -KRTT904T
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota Tacoma's DC 4-Door (1995-2000) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTT904T - Toyota Tacoma DC 4-Door Pickup Truck (1995-2000) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA (2005-CURRENT) RETRAX SLIMLINE II LOAD BED RACK KIT -KRTT958T
$1,696.00
$1,885.00
This kit creates a full-size rack that sits above your Toyota Tacomas (2005 + w/Retrax rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing Retrax cover tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT958T - Toyota Tacoma (2005-Current) Retrax Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 58.25kg (128.42lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18"); Length: 1735mm (68"); Height: 245mm (10")
Shipping Weight:
Weight: 28.6kg (63lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN (2015-2023) CAB OVER CAMPER SLIMLINE II ROOF RACK KIT...
$795.00
$883.00
Get your Toyota Tacoma ready for cargo-carrying duties and adventures with this modular and lightweight roof rack. The kit consists of Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the tray to your Tacoma. The rack is compatible with over 55 accessories tailored to various sports, camping and overland gear.
This 550mm/21.6" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Tacoma. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
KRTT011T - Toyota Tacoma 3rd Gen (2015-2023) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:
1x FATT011 - Toyota Tacoma 3rd Gen (2015-2023) Contour Rails
1x RRSTD03 - SLII Tray - 1255mm(W)X550mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 12.47kg (27.49lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 18kg (40lbs)

Front Runner
Front Runner Toyota Tacoma 3rd Gen Ditch Mount A-Pillar Light Brackets -VACC036
$44.00
$49.00
Durable spot light mounts for your Toyota Tacoma 3rd Gen.
Installs easily to the hood latch using existing factory bolts. No drilling required.
This Bracket allows fitment of various pod lights to increase field of vision at night.
Can also be used to mount small antenna's.
Sold in pairs.
Features
Consists of:
2 x Toyota Tacoma 3rd Gen Ditch Mount A-Pillar Light Brackets
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
219mm (8.6") L x 118mm (4.6") W x 58mm (2.3") H
Weight:
1kg (2.2lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN DOUBLE CAB 5' (2016-2023) PRO BED RACK KIT -PBTT001T
$2,487.00
$2,763.00
Up your Toyota Tacoma's gear-carrying capacity in the load bed area with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Toyota. Attach various Pro Bed accessories to the Pro Bed System, while all our 55+ available other accessories can go on the rack-no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Toyota Tacoma Double Cab 5' load bed.
Included in this Kit is the a 1255mm/49.4" x 1358mm/53.5" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Wolf Pack Pro Cargo System Bracket/Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Toyota Tacoma Double Cab 5' with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001T - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed Rack Kit
Consisting of:
3x FASS025 - Foot Set / 70mm - 80mm
1x PBTT001S - Toyota Tacoma (2005-Current) Pro Bed Rack S
3x RRAC921 - Canopy Rack Kit Installation Set
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 72.23kg (159.24lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1720mm (68")
Height: 510mm (20")
Shipping Weight:
Weight: 81kg (178lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA 3RD GEN DOUBLE CAB 5' (2016-2023) PRO BED SYSTEM -PBTT001S
$1,157.00
$1,285.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tacoma Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tacoma Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tacoma Double Cab with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001S - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT001 - Toyota Tacoma Pro Bed Rack Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.4kg (113.32lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1280mm (50")
Height: 340mm (13")
Shipping Weight:
Weight: 55kg (121lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 6IN (2005-CURRENT) SLIMLINE II LOAD BED RACK KIT -KRTT962T
$1,987.00
$2,208.00
This kit creates a full-size rack that sits above your Toyota Tacomas (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT962T - Toyota Tacoma ReTrax XR 6" (2005-Current) Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 29.4kg (64.82lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17"); Length: 1730mm (68"); Height: 240mm (9")
Shipping Weight:
Weight: 34kg (75lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA REGULAR CAB 2-DOOR UTE (1995-2000) SLIMLINE II LOAD BED RACK KIT...
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota Tacoma's Regular Cab 2-Door (1995-2000) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA XTRA CAB 2-DOOR UTE (2001-CURRENT) SLIMLINE II LOAD BED RACK KIT...
$1,650.00
$1,833.00
This kit creates a full size rack that sits above your Toyota Tacoma's Xtra Cab 2-Door (2001-Current) truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 26kg (57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 30.1kg (66.1lbs)

Front Runner
FRONT RUNNER TOYOTA TACOMA RETRAX XR 6IN (2005-CURRENT) TRIPLE LOAD BAR KIT -KRTT966
$805.00
$895.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRTT966 - Toyota Tacoma ReTrax XR 6" (2005-Current) Triple Load Bar Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8kg (17.64lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1510mm (59"); Height: 150mm (6")
Shipping Weight:
Weight: 10kg (22lbs)