Front Runner
Front Runner Expander Chair Side Table -TBRA052
$34.00
$38.00
Upgrade your Front Runner Expander Chair with this foldable table attachment. Perfect for camping, sports events, the beach, and any other outdoor activities. The table attaches to the frame, creating a sturdy and reliable surface on either side of the Expander Chair and is crafted from durable powder-coated aluminum and high-strength steel that is built to withstand even the toughest outdoor conditions.
An essential accessory to add to your Front Runner Expander Camping Chair*.
Creates a foldable table on either side of the Expander Chair.
Secures to the frame of the Expander Chair's seat and hooks on the armrest to place your belongings.
Ideal for camping, sports events, the beach, and any other activities.
Once secured the table top folds up with the chair and can be stored together in the Expander Chair Storage Bag .
Features an integrated cut-out to place a glass/wine glass conveniently next to your chair at an easy-to-reach height.
Made from aluminum and high-strength steel and sealed in the same weather-resistant black powder-coated finish as all Front Runner racks.
* The Front Runner Expander Camping Chair is not included and must be purchased separately.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1 x Side Table Top1 x Table Hinge1 x Strap1 x Table HookInstallation HardwareFitting Instructions
Materials used:Black Powder coated aluminium Black Powder coated high strength steel
Product Dimensions:190mm (7.5") L x 267mm (11.7") W
Weight:0.48kg (1.1 lbs)
Polyair
POLYAIR STANDARD BELLOWS ULTIMATE AIRBAG KIT, FORD RANGER RAPTOR -89416ULT
$1,345.50
$1,495.00
POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY.
NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS
*** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!
Front Runner
Front Runner Expander Table -TBRA037
$89.00
$99.00
The Expander Table by Front Runner is an essential tool for overlanding, tailgating, campsite mealtime and more. This folding, compact, telescopic table is also the perfect companion to our popular Expander Chairs. Comfortably combine two chairs with the table for a full outdoor furniture setup that easily stows for travel.
Table height is adjustable, the perfect companion to the Expander Chair (CHAI007).
Heat-resistant tabletop has a useable surface area of 635mm/25" x 635mm/25" and supports 27kg / 60lbs.
The lightweight, aluminum design folds flat and stores away neatly.
Includes a travel bag for storage and easy transport.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1 x Expander Table1 x Travel bag
Materials used:Anodized aluminium legsPowder coated aluminium table top
Product Dimensions:Opened Dimensions:635mm (25") L x 635mm (25") W x 712mm (28") H
Closed Dimensions:51mm (2") L x 630mm (24.8") W x 618mm (24.3") H
Weight:2.8kg (6.2lbs)
Load Rating:27.3kg (60lbs)
HSP
HSP LOAD RACK LADDER RACK SUITS GWM HAVAL CANNON FITS DUAL CAB TUB- FRONT LEG...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP LOAD RACK LADDER RACK SUITS ISUZU DMAX GEN 3 2021+ FITS DUAL CAB TUB-...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP LOAD RACK LADDER RACK SUITS LDV T60 FITS DUAL CAB TUB- FRONT LEG ONLY...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP LOAD RACK LADDER RACK SUITS MAZDA BT50 TF 2020+ FITS DUAL CAB TUB- FRONT...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP LOAD RACK LADDER RACK SUITS NISSAN NAVARA 2021+ FITS DUAL CAB TUB - FRONT...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP LOAD RACK LADDER RACK SUITS TOYOTA HILUX 2015+ FITS DUAL CAB TUB- FRONT LEG...
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
Torqit
TORQIT 3" DPF PERFORMANCE CAR BACK EXHAUST FORD RAPTOR (PICK UP ONLY)
$1,521.00
$1,690.00
Experience the pinnacle of performance with the Unbeatable Stainless Steel Torqit Back Exhaust System Ford Raptor. Upgrade your ride today! Order Online.
Direction-Plus
DIRECTION-PLUS PRELINE PLUS PRE-FILTER KIT FORD PXIII BI TURBO
$456.30
$507.00
Direction-Plus™ PreLine-Plus PL664DPK is an innovative pre-filter system for diesel fuel which suits Ford Everest, Ranger, Raptor PXIII Bi Turbo models. PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation.
WATER SEPARATION EFFICIENCY
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
Direction-Plus
DIRECTION-PLUS PRELINE-PLUSPROVENT OIL KIT FORD PXIII BI-TURBO
$692.10
$769.00
The Direction-Plus™ PreLine-Plus / Provent Dual Kit PLPV664DPK is The Ultimate Defence against carbon build-up and water contamination. It fits Ford Everest and Raptor models.
The Dual Kit with our Preline-Plus offering up 100% water separation efficiency* and our ProVent withup to a massive 98% oil separation efficiency, including all parts needed you can‘t go wrong!
Protect your investment 24 hours a day, 365 days a year.
PROTECTION AGAINST WATER CONTAMINATION
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a 100% of water separation and 98% of particle pre-separation. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market.
PROTECTION AGAINST OIL & SOOT CONTAMINATION
Direction-Plus™ ProVent® oil separator kit protects your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system
Direction-Plus
DIRECTION-PLUS TR+ THROTTLE CONTROLLER SUITS FORD AND MAZDA
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
TJM
TORQIT POWER MODULE: 4WD PERFORMANCE CHIP FOR BI TURBO 2.0L RAPTOR (2018 CRM1065-292
$1,390.00
TORQIT POWER MODULE PLUS FOR FORD RAPTOR BI TURBO 2.0L: 2018…
PERFORMANCE GAIN: 23KW / 65NM
The Bi Turbo 2.0L, Raptor Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia’s first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you’re always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit’s unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle’s response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle’s engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
TJM
TJM AIRTEC SNORKEL POLYETHYLENE BLACK KIT FORD RANGER RAPTOR
$599.01
TJM Airtec snorkels are well sealed for optimum air intake and all round improved air flow for your engine. This snorkel kit suits Ford Ranger Raptor 2.0L Bi-Turbo diesel vehicles. They are proudly designed, engineered and molded in Australia from high grade UV-resistant (UV20 UV24) polyethylene for maximum strength and rigidity. A simple installation process requires minimal modifications to your vehicles original components. our snorkels offer greater efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compared to air at bonnet level.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Suits: Ford Ranger Raptor 07/2018 - 08/2022
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine.
Package Weight: 4.50 kg
Compatible Vehicles
FORD RAPTOR 08/18-08/22 4Dr Pick Up
TJM
TJM AIRTEC SNORKEL WEDGETAIL POLYETHYLENE BLACK KIT FOR FORD RAPTOR 08/18-08/22 4DR PICK UP
$590.00
TJM Airtec snorkels are well sealed for optimum air intake and all round improved air flow for your engine. This wedge-tail snorkel kit suits Ford Ranger Raptor 2.0L Bi-Turbo diesel vehicles. They are proudly designed, engineered and molded in Australia from high grade UV-resistant (UV20 UV24) polyethylene for maximum strength and rigidity. A simple installation process requires minimal modifications to your vehicles original components. our snorkels offer greater efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compared to air at bonnet level.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and Engineered to supply correct volume of air to engine
Suits: Ford Ranger Raptor 07/2018 - 08/2022
Tech: Wedgetail style air ram.
Package Weight: 4.50 kg
Compatible Vehicles
FORD RAPTOR 08/18-08/22 4Dr Pick Up
MSA
MSA 4X4 FORD RANGER PY XLT/SPORT/WILDTRAK/RAPTOR DUAL CAB REAR SEAT COVERS- 21045
$458.10
$509.00
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY XLT/Sport/Wildtrak/Raptor Dual Cab
XLT/Sport/Wildtrak/Raptor Bench Seat with 3 x Head Rests and Armrest, Child Seat Holes on Base
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
MSA
MSA 4X4 FORD RANGER PY RAPTOR DUAL CAB FRONT & SECOND ROW SEAT COVERS- 21048
$828.00
$920.00
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY Raptor Dual Cab
Raptor Complete Front and Second Row - (21047 + 21045)
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
MSA
MSA 4X4 FORD RANGER PY RAPTOR DUAL CAB FRONT SEAT COVERS - 21047
$458.10
$509.00
PRODUCT CODE: 21047
VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Premium Canvas Seat covers
SUITS: Ranger PY Raptor Dual Cab
Raptor Driver x 2 Airbags, Passenger x 1 Airbag with Console Cover and Integrated Lumber Support
FEATURES:
Fully Airbag Compliant
ADR Certified
Integrated Lumber Support*
Tight and secure fit
12oz specially manufactured Polycotton blend canvas
Reinforced high wear areas for longevity
Polycotton lined for maximum protection of the original vehicle seats
Large rear pockets and head rest covers as standard
INCLUDES:
MSA 4x4’s Lifetime Guarantee
NOTE:
DO NOT machine wash
DO NOT scrub
DO NOT apply detergent to clean
*Only available on select models
Polyair
POLYAIR 2" BELLOWS ULTIMATE AIRBAG KIT, FORD RANGER RAPTOR -89416RULT
$1,345.50
$1,495.00
POLYAIR BELLOWS # 89416RULT 'ULTIMATE' LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit 08/2022+ FORD 'NEXT GEN' RANGER 'RAPTOR' - RAISED / HEIGHT ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
THIS KIT suits +1.5"/40mm > 2"/50mm RAISED HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR O.E.M. STANDARD HEIGHT RAPTORS - See below for more info on the Kit to suit O.E.M. STD. HT. RAPTORS.
*** NOT SUITABLE FOR ANY LEAF SPRING REAR RANGER UTES !!
FREE CITY METRO SHIPPING INCLUDED*
* Excludes Regional & Remote Areas !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an action off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIRED
SUPER EASY TO INSTALL
DOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / EXTENSION.
THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...
2 YEAR WARRANTY
FREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!
Polyair
POLYAIR 2" LIFT BELLOWS ULTIMATE AIRBAG KIT, FORD RANGER RAPTOR -89415RULT
$1,345.50
$1,495.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Ford - Ranger Raptor - (T6 )PX3 RAPTOR 2019-2022, 4WD
Polyair
POLYAIR STANDARD BELLOWS ULTIMATE PLUS AIRBAG KIT, FORD F SERIES -89412ULT
$1,345.50
$1,495.00
The Polyair Bellows Ultimate Plus load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows Ultimate.The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-100psi- Internal bump stop- Built with a superior 2-ply fabric reinforced rubber- Ultra high strength & corrosion proof Zytel ® Nylon end caps- Easy to install with illustrated instructions- Quick connecting, easy to use air fittings.- Kits designed for standard height and raised applications- Bespoke design for each vehicle
2 year, unlimited km warranty.
To Suit:Ford F150 Raptor, 2009 - 2015
Polyair
POLYAIR STANDARD BELLOWS ULTIMATE PLUS AIRBAG KIT, FORD F SERIES -89413ULT
$1,345.50
$1,495.00
The Polyair Bellows Ultimate Plus load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows Ultimate.The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:- Air adjustable from 5-100psi- Internal bump stop- Built with a superior 2-ply fabric reinforced rubber- Ultra high strength & corrosion proof Zytel ® Nylon end caps- Easy to install with illustrated instructions- Quick connecting, easy to use air fittings.- Kits designed for standard height and raised applications- Bespoke design for each vehicle
2 year, unlimited km warranty.
Position: Rear
Ford - F150 Raptor, 2016 - 2020, 4WD
Polyair
POLYAIR STANDARD BELLOWS ULTIMATE AIRBAG KIT, FORD RANGER RAPTOR -89415ULT
$1,345.50
$1,495.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:- Air adjustable from 5-60psi !- Tough molded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Ford - Ranger Raptor - (T6 )PX3 RAPTOR 2019-2022, 4WD
Direction-Plus
DIRECTION-PLUS FUEL MANAGER POST-FILTER KIT FORD RANGER / EVEREST BI-TURBO (PF664DPK)
$409.50
$455.00
Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022
Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022
Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
Front Runner
FRONT RUNNER KRTC002T SLIMLINE II ROOF RACK KIT FITS TOYOTA COROLLA CROSS 2020-ON
$1,321.00
$1,468.00
Ignite your Toyota Corolla Cross's spirit of adventure and transform it into a reliable gear and sports carrier with the robust Slimline II Roof Rack Kit. No drilling is needed to fit the Slimline II Tray, Foot Rails and Wind Deflector.
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Corolla Cross. It easily installs using the existing factory mounting points. No drilling required.All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Only suitable for versions with OEM roof rails.
Features
KRTC002T - Toyota Corolla Cross (2020-Current) Slimline II Roof Rack Kit
Consisting of:
1x FATC001 - Toyota Corolla Cross (2020 - Current) Foot Rails
1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 21.6kg (47.62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 270mm (11")
Shipping Weight:
Weight: 27kg (59lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTC001L FITS TOYOTA CONDOR
$1,762.00
$1,958.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Condor contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTC001L - Toyota Condor Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.9kg (72.4lbs)
Front Runner
FRONT RUNNER SUZUKI JIMNY 5 DOOR (2023-CURRENT) SLIMLINE II ROOF RACK KIT / TALL -KRSJ008T
$1,804.00
$2,005.00
Massively increase the extra gear-carrying capacity for your 5-door Suzuki Jimny with this full-length Slimline II Roof Rack Kit. This tall version of the kit makes it effortless to have under rack accessories such as the popular Under Rack Table. There are over 55 camping, overland and sports gear accessories for this strong rack, so no Jimny adventure is off the table.
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 5 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ008T - Suzuki Jimny 5 Door (2023-Current) Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS027 - Leg Spacer 6mm (Pair)
4x LASS103 - No 3 Leg 155mm (Pair)
2x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.14kg (84.08lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1720mm (68")
Height: 275mm (11")
Shipping Weight:
Weight: 39kg (86lbs)
Front Runner
FRONT RUNNER SUZUKI JIMNY 5 DOOR (2023-CURRENT) SLIMLINE II ROOF RACK -KRSJ007T
$1,799.00
$1,999.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for the Suzuki Jimny 5 Door contains the Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ007T -Suzuki Jimny 5 Door (2018-Current) Slimline II Roof Rack
Consisting of:
4x LASS102 - No 2 Leg 130mm (Pair)
2x LASS121 - Universal Pinch Weld Strip / 6 Piece
1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 38.37kg (84.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 170mm (7")
Shipping Weight:
Weight: 39kg (86lbs)
Front Runner
FRONT RUNNER FORD RANGER WILDTRAK/RAPTOR (2012-CURRENT) ROLL TOP SLIMLINE II LOAD BED RACK KIT -KRRT016T
$1,587.00
$1,763.00
This kit creates a full-size rack that sits above your Ford Ranger Wildtrak/Rapotor's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1156mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT016T - Ford Ranger Wildtrak/Raptor (2012-Curr) Roll Top Slimline II Load Bed Rack Kit - by Front Runner
Consisting of:
3x LASS028 - Pick-Up Roll Top Leg Mount
3x RRAC962 - Track Mount Stud Plate
1x RRSTJ06 - SLII Tray - 1425mm(W)X1156mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.51kg (60.65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1730mm (68")
Height: 230mm (9")
Shipping Weight:
Weight: 25.91kg (57lbs)
Front Runner
FRONT RUNNER FORD RANGER T6/WILDTRAK/RAPTOR (2012-2022) SLIMLINE II ROOF RACK KIT -KRFR012T
$1,502.00
$1,669.00
This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
An opening on the Foot Rails allows access to Front Runner Under Rack Mount Tables (1 smaller prep or 1 larger camp size table).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling is required for installation.
Features
KRFR012T - Ford Ranger T6/Wildtrak/Raptor (2012-2022) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1x FAFR005 - Ford RangerT6/Wildtrak/Raptor(2012-2022)Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 28.91kg (63.74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 445mm (18")
Length: 1720mm (68")
Height: 250mm (10")
Shipping Weight:
Weight: 29kg (64lbs)
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK/RAPTOR DOUBLE CAB (2022-CURRENT)/ VOLKSWAGEN AMAROK (2023-CURRENT) DOUBLE CAB SLIMLINE...
$1,466.00
$1,629.00
This 1358mm/53.5 long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
Drilling is not required for WildTrak models. For non WildTrak models, drilling into the plastic trim is required for installation.
All Front Runner Racks are backed by a limited lifetime warranty*
Features
KRFR015T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimline II Roof Rack Kit
Consisting of:
1x FAFR008 - Ford Ranger T6 DC (2022-Curr) Foot Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.221kg (66.63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 300mm (12")
Shipping Weight:
Weight: 7.22kg (16lbs)
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK/RAPTOR DOUBLE CAB (2022-CURRENT) SLIMSPORT ROOF RACK KIT / LIGHTBAR...
$975.00
$1,083.00
Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into an absolute beast of a gear carrier with the low-profile Slimsport Roof Rack. This included Wind Fairing has been designed to host a slim 40" Light Bar and move air up, over the rack and cargo, thus reducing wind noise.
This low-profile flat deck Slimsport rack has a load carrying area of 1272mm (50") L x 1166mm (45.9") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included 40" Light Bar wind fairing with rubber edge trim, makes the rack ultra-quiet.
Included is the Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing with a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSFR008T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray
1x RRAC312 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt 40" Lbar WF
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1448mm (57") L x 1233mm (48.5") W x 147mm (5.8")
Approximate Installed Weight: 21.23kg (46.8lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 26kg (57lbs)
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK/RAPTOR DOUBLE CAB (2022-CURRENT) SLIMSPORT ROOF RACK KIT -KSFR009T
$975.00
$1,083.00
Transform your Ford Ranger T6.2 Wildtrak/Raptor Double Cab into the ultimate gear carrier with the extremely quiet Slimsport Roof Rack. The high-strength aluminium slats have T-slots, which makes them suitable for the wide range of top-mount Front Runner accessories.
This low-profile flat deck Slimsport rack has a load-carrying area of 1272mm (50") L x 1166mm (45.9") W.
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately).
The included standard full fairing with rubber edge trim, makes the rack ultra-quiet.
Need a lightbar? The optional lightbar fairing Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation.
Note: Drilling required.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KSFR009T - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit
Consisting of:
1x KSFR006 - Ford Ranger T6.2(22+)/VW Amarok(23+)DC Ssport Tray
1x RRAC313 - Ford Ranger T6 Dbl Cab(22-Curr)SlmSprt WF
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Dimensions:
1448mm (57") L x 1233mm (48.5") W x 147mm (5.8")
Approximate Installed Weight: 21.95kg (48.39lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 330mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 26kg (57lbs)
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK/RAPTOR DOUBLE CAB (2022-CURRENT) SLIMLINE II ROOF RACK KIT /...
$1,463.00
$1,625.00
Unleash your Ford Ranger T6.2 Wildtrak/Raptor's full cargo and gear transporter potential with the sleek, low profile yet ultra-tough Slimline II Roof Rack. Whether it's mountain biking that pumps your adrenaline or overlanding that quenches your thirst for exploration, our wide range of accessories has you covered. Adventure awaits!
This 1358mm/53.5” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and two (2) low-profile Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the Fitment Guide in the Install tab.
Drilling required for installation. No drilling is required for Wildtrak models.
Note: Under-rack accessories and some side-mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Consisting of:
1x FAFR012 - Ford Rngr T6.2(22-Cur)VW Amark (23-Cur)Low Rails
1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:
Black epoxy powder - coated T6 aluminium
High strength steel
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK/RAPTOR DOUBLE CAB (2022-CURRENT) PRO BED SYSTEM -PBFR002S
$1,082.00
$1,202.00
This tough, lightweight steel and aluminum cargo system secures to the load bed of your Ford Ranger T6.2 Wildtrak/Raptor Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit several accessories to its sides or even a Front Runner rack. These include molle panels, storage boxes or recovery tracks. With this incredible cargo system, you can pack all the necessary overland, camping or sports gear.
This Pro Bed System is specifically designed to fit the Ford Ranger T6.2 Wildtrak/Raptor Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Ford Ranger T6.2 Wildtrak/Raptor Double Cab with specific mounting brackets bolted to the existing factory mounting points.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
Features
PBFR002S - Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBFR002 - Ford Ranger T6 Wildtrak Raptor (22-Current) Pro
1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 49.86kg (109.92lbs)
Shipping Dimensions:
Width: 640mm (25")
Length: 1280mm (50")
Height: 460mm (18")
Shipping Weight:
Weight: 52kg (114lbs)
Front Runner
FRONT RUNNER FORD RANGER T6.2 WILDTRAK DOUBLE CAB W/OEM ROLL TOP (2022-CURRENT) SLIMLINE II LOAD...
$1,485.00
$1,650.00
This kit creates a full-size rack that sits above your Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1345mm x1358mm), 2 Ford Ranger Load Bin Mount Brackets, and 6 Pickup Truck Bed Universal Legs that fit into the Brackets.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Ford Ranger T6.2 DOES NOT have a standard OEM Roll Top, Ford Ranger T6.2 Wildtrak/Raptor (2022-Current) Slimline II Load Bed Rack Kit is available.
Features
KRFR024T - Ford Ranger T6.2 Wildtrak Double Cab w/OEM Roll Top (2022-Current) Slimline II Load Bed Rack Kit
Consisting of:
3x FASS016 - Flat Feet (pair) / 65mm
3x RRAC962 - Track Mount Stud Plate
1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 23.94kg (52.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Length = 1720mm
Width = 1445mm
Height = 250mm
Shipping Weight:
Weight = 29kg
Front Runner
Front Runner Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack Wind Fairing -RRAC313
$152.00
$169.00
Improve airflow and fuel consumption of your Ford Ranger T6.2 or Volkswagen Amarok when you fit this Slimsport Rack Wind Fairing. It will push the air up and over your rack and roof cargo, reducing wind noise. There is a durable rubber blade on the bottom edge of the fairing, which seals and protects the roof when going over rough terrain.
A wind fairing for the Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit and Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting instructions
Materials used:Black powder coated steel
Product Dimensions:1160mm (45.7") L x 182mm (7.2") W x 182mm (7.2") H
Weight:3.88kg (8.6lbs)
Front Runner
Front Runner Ford Ranger T6.2 (2022-Current)/Volkswagen Amarok (2023-Current) Double Cab Slimsport Rack 40in Light Bar...
$152.00
$169.00
Improve the airflow and fuel consumption of your Ford Ranger T6.2 or Volkswagen Amarok when you fit this Slimsport Rack 40" Light Bar Wind Fairing. It will push the air up and over your rack and roof cargo, thereby also reducing wind noise. Designed to pair with the 40" Front Runner Light Bar for a sleek look and even more functionality.
Lightbar wind fairing for Ford Ranger T6.2 Wildtrak/Raptor Double Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready and Volkswagen Amarok (2023-Current) Slimsport Roof Rack Kit/Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Slimsport Rack 40" Light Bar Wind Fairing
1 x Protection Strip
Installation Hardware
Fitting instructions
Materials used:
Black powder coated steel
Product Dimensions:
1160mm (45.7") L x 156mm (6.1") W x 156mm (6.1") H
Weight:
3.19kg (7lbs)
Front Runner
FRONT RUNNER FORD F-150 CREW CAB (2021-CURRENT) SLIMSPORT RACK WIND FAIRING -RRAC237
$235.00
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1425mm(W) -KRXJ003
$95.00
$106.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1425mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC289 - Expedition Rail Tubing J (520mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1310mm (51.6") L x 21mm (0.8") W x 63mm (2.5") H
Weight:1.16 kg (2.6 lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back -1165mm(W) -KRXA003
$91.00
$101.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1165mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC287 - Expedition Rail Tubing A (390mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1051mm (41.4") L x 21mm (0.8") W x 63mm (2.5") H
Weight:0.97 kg (2.1 lbs)
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Front Runner
Front Runner Cub Pack -SBOX001
$48.00
$53.00
Stop messing around with temporary cargo carrying solutions. Get down to business with these latching, stackable and durable storage containers.
These plastic compact sized storage boxes are easy to arrange in a cargo bed and vertical-sided to avoid wasted space.
The nesting lids design allows the Front Runner Cub Packs to stack securely to each other.
Made from black, high strength plastic.
More compact than the Wolf Pack Pro.
Integrated grips for easy carrying.
Versatile.
Suitable for exterior storage. For even greater protection on your vehicle, store in a Typhoon Bag.
Use in conjunction with Storage Box Foam Dividers or Stratchits as well as Black Tie Down Rings / Eye Nuts for a safe and secure roof rack storage solution.
Front Runner storage systems are configured around the Wolf Pack Pro and Cub Pack sizes to allow a comprehensive and practical storage solution.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Materials used:Black high density polyethelene (HDPE) plasticProduct Dimensions:L 440mm (17.3") x W 315mm (12.4") x H 210mm (8.3")Internal Dimensions:L 385mm (15.2") x W 270mm (10.6") x H 185mm (7.3")Weight:2.04kg (3.52lbs)Special NotesSKU; M-FRO/001
Front Runner
Front Runner Expedition Rail Kit - Sides - for 752mm (L) to 1358mm (L) Rack...
$159.00
$177.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 4-7 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit works with 7 Slat-long Front Runner Slimline II Roof Racks. If you would like to fit this kit to a rack with slats ranging from 4-6 slats, some cutting of the side rail tubing may be necessary, see the fitting instructions for further details.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:4x Tubular rails2x Cast LH drop downs2x Cast RH drop downs2x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1236mm (48.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.14kg (4.7lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2772mm (L) Rack -KRXS014
$319.00
$354.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 14 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 14 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:10x Tubular rails2x Cast LH drop downs2x Cast RH drop downs8x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2652mm (104.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.6kg (10.1lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 2368mm (L) Rack -KRXS012
$267.00
$297.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 12 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 12 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2248mm (88.5") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.87kg (8.5lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1964mm (L) Rack -KRXS010
$178.00
$198.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 10 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 10 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1844mm (72.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.1kg (6.8lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1762mm (L) Rack -KRXS009
$173.00
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 9 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 9 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1642mm (64.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.9kg (6.4lbs)
Front Runner
Front Runner Expedition Rail Kit - Sides - for 1560mm (L) Rack -KRXS008
$173.00
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 8 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 8 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular side rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminumProduct Dimensions:1440mm (56.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.56kg (5.6lbs)
Front Runner
Front Runner Expedition Rail Kit - Front or Back - for 1255mm(W) Rack -KRXD003
$93.00
$103.00
These rails enhance the functionality and visual aesthetics of your Slimline II Roof Rack, giving it an expedition-style appearance. This kit provides all the necessary hardware and components to effortlessly install the rails onto the front or back of a Front Runner Slimline II Roof Rack with a width of 1255mm.
Install in minutes.
No drilling is required.
Adds extra cargo support.
Attractive, low-profile design.
Mounting hardware included.
Powder coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion-resistant, high-density aluminum components.
The Expedition Rails add 63mm / 2.5” to the height of the roof rack.
The modular bolt-on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.
Can be used at the front or rear of the Slimline II Roof Rack. To add rails to BOTH the front and rear, you will need to purchase 2 Front Runner Expedition Rail Front or Back kits.
To add rails completely around the full perimeter of your rack, purchase the appropriate width Front Runner FULL PERIMETER Expedition Rail Kit
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x RRAC072 - Expedition Rail LH + RH Drop Set1x RRAC073 - Expedition Rail Joiner1x RRAC288 - Expedition Rail Tubing D (435mm)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1441mm (44.9") L x 21mm (0.8") W x 63mm (2.5") H
Weight:1.03 kg (2.3 lbs)
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
