ALPINE 6-1/2" 2-Way Coaxial Marine Speakers (White)-Sps-M601W - SPS-M601W
$134.96
$149.95
ALPINE 6-1/2" 2-WAY WHITE COAXIAL MARINE SPEAKERS (WHITE)-SPS-M601W
The new SPS-M601W White 6.5” Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8” Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5” poly woofers handle the mid-range frequencies.
On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene® rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they’re tested against fog, salt and blazing sunlight so you can be sure they’ll sound great for many seasons to come.
For added convenience, included is a marine grade connection loom for a more robust installation.
Features
Crossover Network
Crossover Type: Built-in Tweeter Protection
Woofer
Frame: High Temp ABS Frame
Cone Material: Poly-Mica Woofer Cone
Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill
Tweeter
Magnet Material: Neodymium Magnet
Application Type / Design Detail: Internal / Fixed Tweeter
Tweeter Type: Titanium/PEI Balanced Dome Tweeter
Specifications
General
Sensitivity: 89dB / W(1m)
Impedance: 4 Ω
Frequency Response: 50Hz – 20khz
Dimensions
Woofer Mounting Depth: 2-27/32”
Woofer Mounting Depth: 72.1mm
Woofer Mounting Diameter: 5”
Woofer Mounting Diameter: 127mm
Woofer Diameter: 6-1/2”
Woofer Diameter: 165.1mm
Power Handling
Power Handling Capacity (Peak): 100 Watts
Power Handling Capacity (RMS): 30 Watts
CEA-2031 Power Rating: 30 Watts
ALPINE Front View Camera System-HCE-C2600FD
$314.96
$349.95
The weather-resistant HCE-C2600FD will help you steer away from obstacles in front of and on the sides of your vehicle, even in the off-road elements.
HDR (High Dynamic Range) technology enhances detail in light and dark conditions
Selectable 3 View Modes (Panorama/Corner/Ground) with select Alpine head units via Direct Connection and Multi-Camera Selector
180 degree horizontal, 125 degree vertical viewing angles
Automatic exposure and white balance adjustment
Universal Mounting Bracket and 10ft Waterproof Direct Extension Cable Included
Compatible with Multi-Camera Selector (KCX-C250MC or KCX-C2600B sold separately)
Compatible with License Plate Camera Mounting Kit (KTX-C10LP sold separately)
Tech Specs
Wide Illumination Range (1.5 to 100,000 Lux)
1/4 inch CMOS Image Sensor (1280 x 960, 1.2M pixels)
IP 68 Water and Dust-proo
HERTZ Mille Pro 25Mm (1") Tweeter - Pair (Mp 25.3...
$259.99
The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Component
Tweeter
Size mm (in.)
29 (1.14)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
1.4k ÷ 22.5k
Magnet size D x d x h mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome
Tetolon
D mm
29
Re Ohm
3,9
Fs Hz
1200
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,1
BL T*m
1,6
Qts
0,55
Qes
1,98
Qms
0,57
Spl dB
91
A
44 mm
1.73 in.
B
41 mm
1.61 in.
C
27 mm
1.06 in.
D
17 mm
0.67 in.
HERTZ Mille Pro 28Mm (1.38") Tweeters And Crossovers - Pair...
$314.99
MP 28.3 Mille Pro 28 mm diameter tweeter component inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28kHz, a record for a tweeter featuring a 28mm voice coil. An elegant and compact angled tweeter support is provided with the tweeter: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k ÷ 25k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,075 (0.16)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,024
Vas I
-
Mms g
0,4
Cms mm/N
0,08
BL T*m
2
Qts
1,1
Qes
1,7
Qms
3,3
Spl dB
91
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
28 mm
11.1 in.
D
13,5 mm
0.53 in.
E
72 mm
2.8 in.
F
45,6 mm
1.8 in.
G
23 mm
0.9 in.
HERTZ Mille Legend 35Mm Tweeter - Pair (Ml 280.3 Legend)
$554.99
To improve the car audio tweeters which was considered a reference since its first introduction into the market is a quite challenging task which could only be performed by a continued evolution in time and maximum care for each detail that might affect sound.From these presuppositions the Hertz ML 280.3 Legend car audio speakers has been born. Through the FEA simulations, the electro-acoustic designers carried out an extensive research which led to the optimization of the Tetolon dome geometry, to minimize distortion.This optimization method led to a reviewed face plate geometry for improved frequency response and lower distortion.Another element of the tweeter especially important for sound is the rear acoustic chamber: the designers performed an exhaustive research on the geometry as well as on the employed damping material, achieving 50% increase in overall volume, to extend response to lower frequencies with 900Hz resonance frequency.
Component
Tweeter
Size mm (in.)
35 (1.38)
Power Handling - Peak W
180
Power Handling - Peak Note
(Hi-Pass filtered @ 1,8kHz - 12dB Oct.)
Impedance Ohm
4
Voice Coil Ø
28 (1.1)
Frequency Response Hz
1k - 28k
Magnet size D x d x h mm (in.)
27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.)
0,10 (0.22)
Magnet
Neodymium
Dome
Tetolon
D mm
28
Re Ohm
3,3
Fs Hz
900
Le mH
0,013
Mms g
0,4
Cms mm/N
0,09
BL T*m
1,9
Qts
1,3
Qes
1,9
Qms
4
Spl dB
92
A
53,4 mm
2.1 in.
B
48 mm
1.89 in.
C
29 mm
1.14 in
D
13,5 mm
0.53 in.
FOCAL Renault Cable Harness -IW-REN-YISO
$100.00
The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 0.9ft (0.3m)
Compatibility: for Renault and Dacia vehicles since 2000
FOCAL Speaker Accessory -BAM XXXL
$360.00
FOCAL BAMXXXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx6m)
Soundproof your car
Attenuates the speaker back wave
Increases the bass level in your car
Increases the soundproofing of outside noise
This acoustic insulation kit is completing and essential to a quality car audio installation.
From its use depends on optimum acoustic rendering of speakers, amplifiers and installed accessories. Technical materials made of honeycombed damping material, an Aluminum sheet and a viscoelastic complex (Butyl).
Honeycombed damping material
Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and thus increases the speaker performance.
Aluminium sheet
Aluminium provides rigidity to the Butyl/foam couple. This rigidity also permits the easy laying of BAM in difficult locations.
Viscoelastic complex
Self-adhesive, the Butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car.
ALPINE Vw Premium Can/If Interface Harness , Retains Climate Control...
$404.96
$449.95
The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / CAN-bus. While replacing the original equipment will not limit the functions, drivers will appreciate the ability to retain such visualisations and controls. The APF-X303VW is our solution that allows the customer to receive the same kind of images while operating the heater or air condition controls and also during parking. The interface will also support the VW radio display in the instrument cluster (MFD) and VW Steering Wheel Remote Control. It includes a complete plug-and-play wiring harness for adaptation to the original VW connectors.
Plug-and-play wiring harness for VW platform (MIB-PQ) vehicles
CAN-bus interface for latest generation of vehicles
Display of air condition / heater settings on Alpine screen
Steering wheel remote control retention
Support of Multi-Function Display (MFD) in instrument cluster
Parking sensor display and rear camera connectivity
Pre-flight Check for Camper Vans
Original hands-free microphone adaptation
Compatible with all Alpine Head Units featuring “Vehicle Data-Bus Interface Ready” functionality
ALPINE KWE-E46EXT Optional Harness for BMW E46 Solution
$107.96
$119.95
Features
Optional harness for the BMW E46
Required for vehicles that have the original radio black-box installed in the boot
Provides all the necessary connections for perfect integration
HERTZ Mille Pro Crossover Set - Pair (Mpcx 2 Tm.3...
$314.99
The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.
Component
Crossover
Adjustment
Tweeter 0 / +2 dB
Weight of one component - Crossover kg (lb)
0,16 (0.35)
Crossover
Midrange Low pass 5,5 kHz @ – 6 dB Oct.Tweeter Hi pass 5,5k Hz @ – 12 dB Oct.
Physical Specs
G
102 mm
4.02 in.
H
76,5 mm
3.01 in.
I
37 mm
1.46 in.
Features
1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.
AUDISON Hi-Res Bluetooth Receiver (B-Con)
$364.99
The Audison B-CON is an advanced Bluetooth 5.0 receiver specifically designed for automotive use, which has obtained the "Hi-Res Audio Wireless" certification from the Japan Audio Society. This device is the ideal choice for those seeking high-quality audio streaming from Hi-Res players such as Fioo or Sony Walkman, as well as from the latest Android and Apple smartphones.
The B-CON is compatible with all audio formats and delivers maximum performance with uncompressed Bluetooth streaming (up to 96 kHz / 24 bit), available only on Android devices compatible with the LDAC codec. This allows for superior sound quality when playing local audio files or using streaming services like Tidal and Qobuz.
The device integrates RCA analog outputs and Toslink optical digital outputs, offering versatile connections to high-quality audio systems. With the implementation of the LDAC codec, the B-CON ensures a frequency response up to 40 kHz, providing an immersive and faithful listening experience. Additionally, the B-CON supports handsfree call management and features "Absolute Volume" to preserve the dynamic range of the audio signal, preventing quality loss during volume adjustments.
In summary, the Audison B-CON is an essential accessory for car audio enthusiasts seeking a superior listening experience without compromising sound quality.
Receiver Tech Data
Power Supply Voltage
6 ÷ 24 VDC
Idling Current
70 mA
Remote IN
3 ÷ 12 VDC (0.5 mA)
Bluetooth Data
Type: Bluetooth 5.0 + EDRCodec: LDAC, AAC, SBCProfile: Bluetooth A2DP 1.3, AVRCP 1.6
Digital Input
Optical: S/PDIF Optical (Max 24 bit/192 kHz)
Digital Output
Optical: S/PDIF Optical (Max 24 bit/192 kHz)
Analog Output Performance
Bandwidth (Max) 20 ÷ 48k HzOutput Level 2 VRMSDistortion – THD @1 kHz, 1 VRMS 0.003%S/N RATIO (A weighted) 100 dBA
Features
Up to 96 kHz / 24-bit BT streaming
LDAC codec compatibility for Android devices
ACC codec compatibility for iOS devices
Automatic handsfree call manage
Absolute volume function, to ensure a full dynamic range audio signal
Digital output
Analog RCA outputs
Digital optical input with pass-through capability to the Digital output (no DA/AD signal conversion)
Additional micro-USB power plug for non-automotive use
HERTZ Cento 26Mm (1") Tweeter - Pair (C26)
$134.99
C 26 tweeter features a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity.
Component
Tweeter
Size mm (in.)
26 (1)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20(0.8)
Frequency Response Hz
1.8k ÷ 22.5k
Magnet size D x d x h mm (in.)
19 x 0 x 3 (0.75 x 0 x 0.12)
Weight of one speaker kg (lb.)
0,04 (0.08)
Magnet
Neodymium
Dome
Tetolon
D mm
26
Re Ohm
3,7
Fs Hz
1500
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,07
BL T*m
1,3
Qts
1,6
Qes
3,5
Qms
2,9
Spl dB
92
A
44 mm
1.73 in.
B
38,5 mm
1.52 in.
C
20 mm
0.79 in.
D
9,1 mm
0,36 in.
HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -...
$524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only.
Component
HIGH EFFICIENCY COMPRESSION DRIVER
Size mm (in.)
46 (1.8)
Power Handling - Peak W
120
Power Handling - Peak Note
Hi-pass filtered @ 5 kHz - 12 dB Oct.
Impedance Ohm
4
Voice Coil Ø
35 (1.4)
Frequency Response Hz
2k ÷ 20k
Weight of one component kg (lb.)
0,53 (1.17)
Magnet
Neodymium
Dome
Aluminium
D mm
46
Re Ohm
3,3
Fs Hz
4000
Le mH
0,02
BL T*m
3,5
Spl dB
109
A
69 mm
2.72 in.
B
52 mm
2.05 in.
C
65,7 mm
2.59 in.
D
33,3 mm
1.31 in.
HERTZ Saddle Bag Lid Kit And Speaker Harness To Suit...
$849.99
The Hertz HD14H Kit is the ultimate solution for upgrading the audio system on your motorcycle. Designed with precision and ease of installation in mind, this kit is perfect for riders who want exceptional sound quality without the hassle. Please note, speakers are not included in this kit.
The HD14H Kit includes:
Saddlebag Lid: Crafted to seamlessly integrate with your motorcycle’s saddlebags, this lid is engineered to house Hertz 690 NEO.1 speaker. Its sleek and durable design ensures a perfect fit and enhances your bike's aesthetics while delivering a secure and acoustically optimized mounting location.
Speaker Harness: This plug-and-play harness makes installation a breeze. It connects directly to your existing audio system, eliminating the need for complex wiring or modifications.
Mounting Accessories: The kit comes with everything you need for a professional installation, including a cut-out template, 6x9 inch speaker mounts, speaker grilles, and all necessary mounting hardware.
Why Choose the HD14H Kit?
Custom-fit for a clean, professional look
Simplifies the upgrade process with easy installation
Built to last with high-quality materials
Designed to deliver superior sound performance
Take your ride to the next level with the Hertz HD14H Kit and enjoy an unparalleled audio experience every time you hit the road.
Component
Includes HD14 LID KIT and Speaker Harness (Speakers not included)
HERTZ Marine 12" 1000W 2 Ohm Svc Rgb Black Subwoofer...
$734.99
The new HMS 12 marine classic charcoal grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The classi grille, features built-in LEDs. Can be easily and painted the perfect color for your vessel. The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion. Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion!
Size mm (in.)
300 (12)
Power Handling - Continuous W
500
Power Handling - Peak W
1000
Impedance Ohm
2
Depth mm (in.)
191 (7.52)
Voice Coil Type
single
No Filter Component
2Ω INFINITE BAFFLE LED SUBWOOFER
Voice Coil Ø
65.5 (2.6)
Magnet size D x d x h mm (in.)
156 x 80 x 40 (6.14 x 3.15 x 1.57)
Weight of one component kg (lb.)
7,6 (16.8)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
D mm
265
Xmax mm
19
Re Ohm
1.8
Fs Hz
30
Le mH
0.41
Vas I
95.4
Mms g
114
Cms mm/N
0.225
BL T*m
8
Qts
1
Qes
1.1
Qms
11.1
Spl dB
89.5
A
342.9 mm
13.5 in.
B
279.4 mm
11 in.
C
192.8 mm
7.59 in.
D
140.6 mm
5.54 in.
F
52.2 mm
2.06 in.
Frequency response
HERTZ Marine 1240W 1 Channel Amplifier (Hcp 1Mdk)
$944.99
HCP 1MDK mono marine amplifierfeatures latest generation D-Class 2Ω stable output stage reaching the impressive RMS power of 740 W x 1 (4 Ω). Engineered and tested for the real environment of application (UV, salt-fog, vibrations, high/low temperature, thermal shock, dust), HCP 1MDK features a compact design built from extruded aluminium heatsink with top side ensuring effective heat transfer. The special balanced input circuitry reject electro-magnetic disturbances and the Hi-Level and lo-level inputs are compatible with any source. The Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB adds more punch to subwoofer and SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. The continuously adjustable PHASE control (0 to 180°) optimizes alignment of woofer bass frequencies with sub ones. The Optional Remote Volume Control (HRC) provides the ability to adjust subwoofer volume level from the dashboard.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage / fuse:
11 ÷ 15 VDC / 3 x 30 A
Idling current (power ON/OFF)
0.8 A / 1 mA
Consumption @ 2 Ω, 14.4 VDC (Max Musical Power):
45 A
Remote In:
7 ÷ 15 VDC - 1 mA
ART:
Automatic Remote Turn-On/Off with Speaker-In
AMPLIFIER STAGE
Distorsion - THD (100 Hz @ 4 Ω):
0.25%
Bandwidth:
10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V):
100 dB
Damping factor (100 Hz @ 4 Ω):
> 100
Pre-In sensitivity:
0.2 ÷ 5 VRMS
Speaker-In sensitivity:
0.8 ÷ 20 VRMS
Load impedance (MIN)
@ 1 Ch:
2 Ω
Max size (mm / in.):
315 x 190 x 50 / 12.40 x 7.48 x 1.97
Weight (kg / lb.):
3 / 6,61
Adjustable Crossovers
yes
Output Power
Output Power (RMS) @ 14.4 VDC, THD 1%
1 Ch:
600 W x 1 (4 Ω)
1 Ch:
1100 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch:
740 W x 1 (4 Ω)
1 Ch:
1240 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power (4 Ω, ≤1 %THD + N, 14.4 V):
600 W x 1 Ch
S/N Ratio (ref. 1 W output):
80 dBA
Total Power
1240 W
INPUTS / FILTERS
INPUTS:
PRE IN / SPEAKER IN
Pre out Hi-Pass:
50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL:
Yes
Lo-Pass:
50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off):
25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust):
(0 ÷ 6) dB
PHASE(adjust):
(0 ÷ 180) deg
Remote Volume Control (adjust):
(-50 ÷ 6) dB
Physical Specs
mm
in
A
315
12.40
B
291
11.45
C
190
7.48
D
166
6.53
E
50
1.97
HERTZ Digital Interface Processor (S8 Dsp)
$1,309.99
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
General Specifications
POWER SUPPLY
Nominal Power supply voltage / fuse:
7 ÷ 20 VDC / 1A
Pulse operating voltage:
5 ÷ 24 VDC
Idling current:
0.34 A
OFF current (ART= OFF):
<80 uA
OFF current (ART= ON):
<80 uA
Remote IN
6 ÷ 20 VDC (10 mA)
Remote OUT
4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable):
1.5 ÷ 7 VDC
Input Stage
Analog low level Inputs
6 ch. (Differential input) (Molex microfit to RCAs)
Analog high level Inputs
6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator)
Digital inputs
Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA)
Input sensitivity (low level)
0.8V – 6V RMS
Input sensitivity (high level)
2.5V – 21V RMS
Analog inputs management
Audio input routing matrix type
Analog inputs eq
7 bands paragraphic for each input channel
ART
Automatic Remote Turn-On/Off with Speaker-In
Output Stage
Analog outputs (rca)
8 channels
Max output level (rms) @ 0.05% THD
4V
Analog outputs management
The DSP controls each output channel: gain, crossover, EQ, delay, polarity
Bandwidth
10Hz – 40KHz (+/-3db)
Signal to noise ratio (A weighted)
105dBA (Analog Input) 112dBA (Digital Input)
THD+N (@ 1Vrms out, @ 1Khz)
<0.005%
Crosstalk (channel separation) @ 1KHz
>95dBA
Digital Signal Processor
Sample rate
96KHz
Bit depth
24
Output equalizer
15 bands per channel w/ adjustable Q and Frequency
Equalizer resolution
1/10th dB per step +12dB / -12dB
Time alignment (distance)
0 ÷ 468.4 cm / 0 ÷ 184.4 inches
Time alignment (time)
0 ÷ 13.5ms
Time alignment (step)
0,08 ms; 2,8 cm / 1.1 inch
Time alignment (fine set)
0,02 ms; 0,7 cm / 0.27 inch
Crossovers
AP/HP/LP/BP all channels
Crossover type
Butterworth, Linkwitz-Riley, Bessel (All Channels)
Crossover slope
From 6dB/oct. until 30dB/oct. (6dB step)
Crossover steps
120 steps 20Hz-20KHz
Mute function
Each channel individually, or all channels.
Presets
4 presets
Presets selection
2 specific wires to control the 4 presets selection by extarnal switches.
Input selection by wire
One specific wire to select the desired input between Analog or Digital.
Audio signal compressor on output stage
Yes (enable/disable)
DSP chipset
Analog Device: ADAU1451
DSP management by bt app (iOS/ Android)
1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file.
Setup file sharing via bt
Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode.
DSP management by pc / mac / ios / android
Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Physical Specs
Max size W x H x D (mm/inch)
130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47
Weight (kg/lbs)
0,66 / 1.45
HERTZ Marine Remote Control With Tft Ips Display (Capri Hd1)
$849.99
CAPRI HD1 allows to replicate every function of the main unit in every place of the boat you desire, maximizing the onboard comfort.
Optional for CAPRI.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 60 (2.95)
Mounting Method
Screw
Physical Specs
mm
in
A
178.5
7.02
A1
163
6.42
B
101
3.57
B1
84
3.31
C
18
0.71
D
31.30
1.23
E
59. 89
2.36
F
8
0.31
HERTZ Hertz Marine 10M Remote Controller Extension Cable (Hma C1310)
$174.99
HMA C1310 extension cable is made to connect CAPRI HD1 to the CAPRI H100 main unit.
Optional for CAPRI - 10 mt.
HERTZ Hertz Marine Remote Controller Y-Splitter Cable (Hma C13Y)
$109.99
13 pin y cable.
Optional for HMR 50
HERTZ Hertz Marine 6M Remote Controller Extension Cable (Hma C1306)
$119.99
13 pin remote controller extension cable 6 mt.
Optional for HMR 50.
HERTZ Dab+ Digital Radio Module For Hertz Marine Hmr 20...
$314.99
This module adds DAB+ DIGITAL RADIO capability to Hertz Marine Source. Provided with the dedicated antenna.
Optional for Capri and HMR 20
HERTZ Marine Remote Control With Tft Display (Hmc D1)
$429.99
HMCD1 provides the ability to replicate every function of the HMR 50 main unit, creating up to 3 independently controlled listening areas.
Optional for HMR 50
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 75 (2.95)
Mounting Method
U-Bracket/Screw
Physical Specs
mm
in
A
146
5.75
B
105
4.13
C
12
0.47
D
34
1.34
E
80
3.15
G
50
1.97
H
133
4.98
HERTZ Marine Remote Control (Hmc U1)
$294.99
Play your favorite song and pump up the volume while swimming in open water. With IPX7 certification you can install HMC U1 remote control anywhere on the boat. Optional for CAPRI, HMR 50, HMR 20, HMR 18, HMR 18D, HMR 15, HMR 15 D, HMR 10 D, HMR 10, HMR BT.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 45 (1,77)
Mounting Method
U-Bracket
Physical Specs
mm
in
A
68
2.68
A1
70
2.76
B
58
2.28
C
29
1.13
D
18
0.70
E
46
1.83
HERTZ Marine Bluetooth Media Receiver - Bluetooth (Hmr Bt)
$349.99
Thanks to the IP67 water resistance rating, the HMR BT Bluetooth® audio controller/receiver is ideal for small boat and Powersports applications. When connected directly to an amplifier, it can be used as a stand-alone source unit/receiver or it can provide Bluetooth® connectivity to any source unit with line-level inputs. The white LED backlit push-button controls are always well visible at any hour of the day. Ready to have some serious fun with the HMR BT Bluetooth® Audio Controller/Receiver?
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
marine digital media receiver
made for off-road and marine use
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
rear-panel amplifier output
cutout dimensions: 1.77"
warranty: 1 year
MFR # HMR BT
Item # 301HMRBT
Specification
FRONT PANEL IP RATING
IP67
LINE OUTS
1x Stereo RCAs (left and right)
FREQUENCY RESPONSE
20 Hz - 18 kHz (±1dB)
S/N Ratio @ 4Vrms (THD <1%)
93 dB (20 Hz - 20 kHz)
PREOUT VOLTAGE & IMPEDANCE
4V RMS / <100Ohm
REMOTE OUT
8V - 24V
OPERATING VOLTAGE
8V - 28V
Fuse
2A
OPERATING TEMPERATURE RANGE
-10°C - 50°C
Sources
BLUETOOTH®
5.0Audio streamingMax distance 10 m / 30 ft.
A2DP / AVRCP
Playback
Qualcomm® APTX low latency
CD quality streaming
REMOTE CONTROL
HMC U1
Size & Mounting
Mounting Hole diameter mm (in.)
Ø 45 (1.77)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
73,2 - 2.9 (mm - in.)
A1
64,1 - 2.5 (mm - in.)
B
63,7 - 2.5 (mm - in.)
B1
27,7 - 1.09 (mm - in.)
C
39,1 - 1.54 (mm - in.)
D
16,7 - 0.66 (mm - in.)
E
55,8 - 2.2 (mm - in.)
AUDISON Prima Active Power Acc Kit Apbxkit
$149.99
The Audison APBXKIT makes it easy to connect and power compatible Audison subwoofer enclosures. Designed for a clean and reliable installation, it ensures your subwoofer performs at its best without unnecessary hassle.
Built with quality materials for lasting durability, this kit is ideal for achieving a secure, efficient setup. Check compatibility with your subwoofer before purchase and have it installed by us or a qualified technician for optimal results.
AUDISON Prima Line - 1" Tweeter And Crossover Component -...
$249.99
The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:1. OEM, for an easy and correct factory placement2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations3. Spoke grille: for maximum acoustic performance with a-pillar installationsThanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:1. Watch band2. Double-angle cup3. Flush Mounting Ring4. Metal mounting springTechnical SpecificationsSize: 29 mm (1.14″)Power Handling: Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance: 8 ΩFrequency Response: 1,2 ÷ 25 kHzCrossover name: APCX P 2TCrossover Type: High Pass, 4kHz, 12 dB/oct.Crossover adjustment: Tweeter Level: 0 / +3 dBSensitivity: 92 dB/SplMagnet: NeodymiumTweeter Voice Coil Ø: 25 mm (1″)Dome: Tetolon fibre
AUDISON Prima Line - 2.6M Ap Bit Input Harness (Ap...
$314.99
Audison AP 260P&P I/O - ISO EXTENSION IN/OUT 260CM/102IN CONNECTION CABL
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E)
$189.99
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
AUDISON Prima Line - Oem Harness (Apbmw Reamp 1)
$229.99
This Plug&Play harness allows the replacement of the OEM BMW amplifier with an Audison AP bit or AF bit amplifier on BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options and on BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system. The OEM seven-channel analog amplifier is connected via a forty-two-pin multipolar connector.
Features
Compatible with BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options
Compatible with BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system
Compatible with Audison AF bit amplifier. The use of other products may require modifications and additional connections to the vehicle
Compatible with AP F8.9 bit. The AP F IN ADP adapter is required for full P&P connection.
Confirm proper application: APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable
NOTE: AP BMW ASD BYPASS may also be required in vehicles that have the optional ASD “artificial exhaust sound” feature. Not compatible with current RAM-equipped BMW models using AFBMW ReAMP3, or with MOST-equipped 677/688 systems.
AUDISON Prima Line - Plug And Play Harness To Suit...
$279.99
This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector.
Features
Retrieve the OEM source front and rear stereo audio signal.
Route the AP FORZA amp outputs to each of the OEMamplifier seven channels:(Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)The Plug&Play terminals enable the user to choose whichAP FORZA amplifier output to connect to each of the sevenchannels of the OEM audio system.It is also possible to bridge the outputs of the AP FORZAamplifier.
Keep the OEM amplifier on.
The USS1 prevent the speaker diagnostic error of the centerchannel.
AUDISON Prima Line - Oem T-Harness (Ap T - H...
$144.99
PRIMA T-HARNESS BMW
T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
Features
Designed specifically for your vehicle
For maximum OEM integration.
Connection to the AP Extension cable through ISO connectors
Possibility to supply power to the amplifier via the direct cockpit current system
Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution).
ACC wire to re-launch ignition key signal to turn on / off an external device*
*In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list
AUDISON Prima Line - Tower Kit To Suit Prima Amplifiers...
$209.99
APTK 3 - AUDISON PRIMA TOWER KIT 3With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating. *Does not include Amplifiers*
AUDISON Prima Line - Coaxial To Toslink Converter, Aux Input...
$304.99
The Audison C2O is a high–precision interface designed to convert both coaxial digital and analog AUX signals into a TOSLINK optical digital output. Supporting resolutions up to 24-bit / 192 kHz, the C2O ensures perfect integration between modern Hi-Res portable players, smartphones, and Audison processors equipped with an optical digital input. Thanks to its ultra-compact design, the C2O can be easily installed in hidden or tight spaces inside the vehicle, minimizing cable length and eliminating noise issues often caused by long signal paths. The C2O is the ideal solution for integrating Hi-Res audio sources into advanced Audison ecosystems, guaranteeing signal integrity, perfect compatibility, and a streamlined installation experience. Its intelligent design and premium components make it indispensable for achieving the highest sound quality in modern car audio systems
Dual Input Conversion:
Converts digital coax (75 Ω) and analog AUX (3.5 mm jack, including 4-pole types) into a high-quality TOSLINK optical output.
High-Resolution Digital Output:
From analog input: 24-bit / 48 kHz
From coaxial digital input: 24-bit / 192 kHz
Smart Input Management:
Automatic input selection with priority to the AUX input. If no analog signal is detected, the device switches to the coaxial input after 6 seconds (adjustable to 9 or 12 seconds via internal switch).
Noise-Free Signal Handling:
The coaxial digital input features an isolation transformer to minimize electromagnetic interference (EMI), ensuring clean and stable signal transmission.
Optimized Analog Input Stage:
Integrated pre-amplifier with adjustable gain (0.1V to 2V) for perfect matching with various devices before high-quality A/D conversion.
Flexible Power Supply Options:
Operates from 6 to 30 VDC, with support for both classic remote turn-on and +12V REM trigger.
AUDISON Voce Ii - Crossover Set 3-Way (Avcx 3P)
$579.99
The Audison AVCX 3P is a three-way passive crossover meticulously engineered to facilitate bi-amplification and seamless integration within the Audison VOCE II series. This crossover is specifically designed to harmonize the performance of the AV 3.0 II midrange speaker with other VOCE II components, ensuring a coherent and balanced soundstage. The AVCX 3P’s design supports distinct amplification of the woofer, midrange, and tweeter, allowing for precise control over each frequency band. This setup is ideal for achieving the optimal blend of sound dynamics and clarity, tailored to the sophisticated setups demanded by modern car audio enthusiasts.
AUDISON Voce Line - 2 Way Crossover Box (Avcx 2W...
$174.99
Audison AV CX 2W MB VOCE Series 2-Way Crossover - Tweeter + Woofer (Pair)Especially designed for the AV K5 and AV K6 two-way complete systems, shapes their acoustic response to achieve a consistent, harmonious sound in any vehicle, also offering the acoustic controls necessary to achieve the best balance according to one’s own taste.
AUDISON Forza Line - T-Harness To Suit Bmw (Afbmw Reamp...
$284.99
Accessories | Plug&Play T-Harness to install Audison AF bit on BMW | Compatible with BMW “Standard” or “Hi-Fi” 676 system and BMW 688 Harman/Kardon
This Plug&Play T-Harness allows to install an Audison AF bit amplifier on BMW vehicles equipped with RAM modules. It is compatible with "Standard" and "HI-FI" 676 sound systems (It is also compatible with 688 HK-branded systems, but only delivers 7 of the 9 channels required). This harness delivers the 7 speaker-level outputs of the RAM to the inputs of your AF amplifier and also provides speaker leads for front, rear, underseat woofer, and center - so you can configure your AF amplifier as desired. NOTE: not compatible with AP BMW ASD BYPASS – Active Sound “artificial exhaust note” defeat requires vehicle coding.
AUDISON Digital Most Interface (Bit Dmi)
$1,699.99
The Bit DMI is a high-quality digital interface designed to connect the original digital sources of a vehicle with Audison signal processors, ensuring a signal transmission free from disturbances and without loss of quality. This device allows you to maintain the original functionalities of the vehicle's audio system while integrating high-end audio solutions for a superior listening experience.
The Bit DMI is compatible with the digital systems of major automotive manufacturers, thanks to its ability to convert native digital signals into signals compatible with signal processors. This ensures a faithful audio reproduction, preserving the integrity of the original sound and enhancing its quality through the advanced signal management provided by Audison processors.
Installing the Bit DMI is simple and non-invasive, designed to integrate perfectly with the vehicle's onboard electronics without compromising the original functionalities of the system. Moreover, its compact and discreet design allows for flexible installation in different types of vehicles, without requiring substantial modifications.
In summary, the Bit DMI is an ideal solution for those who want to enhance their vehicle's audio performance while maintaining compatibility with the original systems, ensuring excellent sound quality and perfect integration with the existing instrumentation.
Features
MOST optical input The Audison bit DMI connects via optical fiber to the OEM multimedia system.
S/PDIF optical output to transfer audio data in Stereo PCM 16bit format, 44.1kHz/48kHz (depending on the system) for use with Audison products with digital input.
Digital controls USB/mini B (2.0) for connection to your PC.
Configuration via USB and the appropriate software, the Audison bit DMI can be programmed and updated to work with vehicles equipped with MOST technology.
Start controls: the bitDMI switches on and off automatically upon activation or deactivation of the car’s MOST system and generates the Remote Out signal to turn on your amplifier
Integration with the OEM source Volume, balance and tone controls are kept intact as well as service signals of the car audio system, such as the handsfree calls, navigator and parking sensors.
bit DMI software Windows-based (Win2000, XP, Vista, Windows 7, Windows 8).
AUDISON Bit Line - 9 Channel Stand Alone Digital Signal...
$1,260.00
Audison Bit Nove DRC Signal Interface Processor with 6 Channels In and 9 Channels Out with 2 Optical Inputs works with Maestro AR with DRC AB Remote Included
bit Nove is a powerhouse of technology fully dedicated to listening pleasure: since 2007, the year in which the bit One was first introduced, Audison has never stopped delivering innovation to the digital processors segment. The bit Nove was born from this unique know-how within the industry, the perfect tool to expand a car audio system maximizing its performance.
POWER SUPPLY
Voltage: 10.8 ÷ 15 VDC
Operating power supply voltage: 7.5 ÷ 14.4 VDC
Idling current: 0.53 A
Switched off without DRC: 1 mA
Switched off with DRC: 4.5 mA
Remote IN voltage:4 ÷ 15 VDC (1mA)
Remote OUT voltage: 10 ÷ 15 VDC (130 mA)
ART (Automatic Remote Turn ON): 2 ÷ 7 VDC
SIGNAL STAGE
Distortion - THD @ 1 kHz, 1 VRMS Output: 0.005%
Bandwidth @ -3 dB: 10 Hz ÷ 22 kHz
S/N ratio @ A weighted
Master Input: 102 dBA
AUX Input: 101.5 dBA
OPTICAL IN1 / IN2 Inputs: 110 dBA
Channel Separation @ 1 kHz: 85 dBA
Input sensitivity Pre Master: 1.2 ÷ 8 VRMS
Input sensitivity Speaker Master: 3 ÷ 20 VRMS
Input sensitivity AUX Master: 0.3 ÷ 5 VRMS
Input impedance Pre In / Speaker In / AUX: 15 kΩ / 12 Ω / 15 kΩ
Max Output Level (RMS) @ 0.1% THD: 4 V
INPUT STAGE
Low level (Pre): Ch1 ÷ Ch6; AUX L/R
High Level (Speaker In): Ch1 ÷ Ch6
Digital: 2 x Optical S/PDIF; Max 192 kHz / 24 bit
OUTPUT STAGE
Low level (Pre): Ch1 ÷ Ch9
CONNECTION
From / To Personal Computer: 1 x Micro USB
To Audison DRC AB / DRC MP: 1 x AC Link
Optical 2 sel: Optical In 2 wire control +12 V enable
Mem D sel: Memory D wire control GND enable
CROSSOVER
Filter type: Full / Hi pass / Low Pass / Band Pass
Filter mode and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB
Crossover Frequency: 68 steps @ 20 ÷ 20k Hz
Phase control: 0° / 180°
EQUALIZER (20 ÷ 20K Hz)
Analog Input: Equalizer Automatic De-Equalization
Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz
TIME ALIGNMENT
Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inches
Delay: 0 ÷ 15 ms
Step: 0,08 ms; 2,8 cm / 1.1 inch
Fine: SET 0,02 ms; 0,7 cm / 0.27 inch
GENERAL REQUIREMENTS
PC connections: USB 1.1 / 2.0 / 3.0 Compatible
Software/PC requirements: Microsoft Windows (32/64 bit): Vista, Windows 7, Windows 8, Windows 10
Video Resolution with screen resize: min. 1024 x 600
Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F)
SIZE
W (Width) x H (Height) x D (Depth) mm/inch: 130 x 34.5 x 199 / 5.11” x 1.35” x 7.83”
AUDISON Bit Line - 5 Channel Stand Alone Digital Signal...
$629.99
The Audison Bit Ten is a versatile and high-performance digital signal processor designed to enhance and optimize your vehicle's audio system, transforming any setup into a high-quality sound system. Thanks to its ability to manage and process audio signals with precision and detail, the Bit Ten allows you to achieve a balanced and faithful sound, perfectly adapted to the acoustic characteristics of the cabin.
This device allows you to connect original or aftermarket audio sources, providing complete control over every aspect of the sound through an intuitive and advanced user interface. The Bit Ten offers the ability to adjust equalization parameters, crossover filters, and time delay management, allowing for sound optimization according to the specific needs of the user and the vehicle.
Installing the Bit Ten is simple and flexible, designed to easily integrate with a wide range of car audio systems, whether existing or new. Thanks to its compact size and versatility, the Bit Ten can be installed in various locations within the cabin without taking up excessive space.
The Bit Ten stands out for its ability to significantly improve the audio quality of the vehicle's system, turning every trip into a superior listening experience. This digital processor is the ideal choice for those who want to customize and perfect their audio system, ensuring clear, powerful, and high-fidelity sound in any situation.
DSP Tech Data
Nominal power supply voltage / Fuse
11 ÷ 15 VDC
Channels
5
Sample Rate
24 bit / 48 kHz
Hi Level Inputs
4
Low Level Inputs
4
Digital Inputs
0
Processing Method
Fixed point
Idling current
0.4 A
Switched off without DRC MP
2.5 mA
Switched off with DRC MP
4 mA
Remote IN
7 ÷ 15 VDC (1.3 mA)
Remote OUT
12 VDC (130 mA)
Signal Stage
Distortion - THD @ 1 kHz, 1 VRMS Output
0.005 %
Bandwidth @ -3 dB
10 ÷ 22k Hz
S/N ratio @ A weighted, 4 V Output, 2 V MASTER input
96 dBA
S/N ratio @ A weighted, 4 V Output, OPTICAL IN1/IN2 input
95 dBA
Channel Separation @ 1 kHz
85 dB
Input sensitivity AUX
0.6 ÷ 5 V RMS
Input impedance Pre In
15 kΩ
Input impedance Speaker In / AUX
2,2 kΩ
Max Output Level 0.1% THD
4 V RMS
Input Stage
Low level (Pre)
AUX IN
High Level (Speaker In)
FL - FR - RL - RR - PHONE IN
Output Stage
Low level (Pre)
FRONT L/R, REAR L/R, SUB
Connection
From / To Personal Computer
1 x USB / B (1.1/2.0)
Crossover
Filter type
Full / High Pass/ Low Pass/ Band Pass
Filter mode and slope
Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB
Crossover Frequency
68 steps @ 20 ÷20k Hz
Phase control
0° ÷ 180°
Time Alignment
Distance
0 ÷ 510 cm / 0 ÷ 200.8 in.
Delay
0 ÷ 15 ms
Step
0,08 ms; 2,8 cm / 1.1 in.
AUDISON Bit Line - Rca Bit Ten Adapter Cable (Cbt1)
$134.99
RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.
AUDISON Bit Line - Compact Digital Remote Control (Drc Ab)
$229.99
The Audison DRC AB is a sophisticated remote control unit designed to enhance your vehicle's audio experience. This advanced device allows you to manage and customize your car's audio system with precision and ease. The DRC AB features an intuitive interface that lets you control all key audio functions, such as volume, sound sources, and equalizer settings, directly from the dashboard.
The unit's sleek and compact design makes it easy to integrate into the vehicle's dashboard without compromising the interior's aesthetics. The clear, easy-to-read display provides real-time information about audio settings, ensuring immediate control and minimal distraction while driving.
One of the main features of the DRC AB is its ability to manage and save custom presets. This allows users to store their preferred audio settings and access them quickly, facilitating adjustments to different musical styles and driving conditions. Additionally, the DRC AB supports managing multiple audio zones, making it ideal for vehicles with complex audio setups or multiple amplifiers. This functionality enables independent sound control in different areas of the vehicle, providing an optimal audio experience for all passengers.
Installation of the DRC AB is straightforward and quick, thanks to its compatibility with a wide range of Audison processors and interfaces. This device offers a versatile and powerful solution for car audio enthusiasts seeking precise and customizable control of their audio system. In summary, the Audison DRC AB is the perfect choice for those who want advanced and intuitive control of their audio system, significantly enhancing the listening experience while driving.
Features
Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Main, Aux 1,Digital Optical 1 2).
Audison bit Nove memories selection.
AUDISON Bit Line - Compact Digital Remote Control (Drc Ac)
$314.99
Adjust master volume, tweak subwoofer level, switch sources, and recall DSP presets in seconds. Designed for a seamless OEM-style fit, it blends perfectly into any interior while RGB LED indicators keep everything clear, day or night. With a single cable for power and control, installation is fast and clean. Fully compatible with a wide range of Audison processors, the DRC AC is your perfect interface for precision sound with a touch of style.
Features
• RGB LED Feedback: colored LEDs show volume position and active functions, making control simple and intuitive.
• Software Programmable Functions: use bit Drive software to assign up to 5 custom functions, each with its own LED color.
• Compatible with DSPs featuring CANBUS: works with Audison DSPs equipped with CANBUS communication via the DRCC port.
• Compact and Easy to Install: choose surface or flush mounting to match your vehicle’s style.
• One Cable, Zero Hassle: a single DRCC cable handles both power and control for fast and clean installation.
• Automatic LED Sleep Mode: LEDs dim after 5 seconds of inactivity for a minimal and elegant dashboard.
• Updatable Firmware: stay current with simple PC firmware updates for future enhancements.
AUDISON Bit Line - Digital Remote Control Media Play Ac...
$399.99
Audison DRC MP is an advanced remote control designed to offer a wide range of customization and management options for high-quality audio systems installed in vehicles. This device is essential for those seeking precise and versatile control of their audio system, providing intuitive and convenient management directly from the vehicle's dashboard.
The DRC MP (Digital Remote Control Multi-Processor) has been developed to work in synergy with Audison Bit series processors, allowing users to easily modify and adjust various audio parameters. With its ergonomic design and robust construction, the DRC MP integrates seamlessly into the car dashboard, offering immediate access to main functions such as volume, source selection, and equalization.
The device features an intuitive user interface and a clear display that shows all the necessary information for effective control. Adjustments can be made in real time, allowing you to tailor the sound to personal preferences and varying listening conditions. The ability to save and recall custom presets makes the DRC MP extremely versatile, suitable for different musical styles and driving situations.
Additionally, the DRC MP supports the management of multiple audio zones, allowing independent control of sound in different areas of the vehicle. This is particularly useful for vehicles with complex audio systems or multi-amplifier setups. The ease of installation and compatibility with various Audison processors make it a valuable addition for any car audio enthusiast.
In summary, the Audison DRC MP is a high-quality remote control that provides users with detailed and flexible control over their audio system, enhancing the listening experience with simple and intuitive management directly from the vehicle.
Features
Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Aux 1, Aux 2,Digital Electric, Digital Optical).
DRC Settings:Keybord color, Keybord brightness, Display brightness, Discreet screen, Mainscreen logo (through the DRC MP joystick).
DSP Memory:Audison compatible products memories selection.
DSP Settings:Dynamic EQ, Bass Boost, AutoIN Level Adj.Player Menu:bit Play HD off delay.
Navi Command:navigation of bit Play HD (through the DRC MP joystick). Available only with compatible Audison products connected Available only with bit Play HD connected
AUDISON Bit Line - Digital Remote Control Media Play Ac...
$369.99
Audison DRC MP CAN is the new high-end remote controller designed for Forza bit DSP amplifiers and future Audison devices with a DRCC port. The white OLED display ensures excellent visibility under all cabin lighting conditions, with a 160-degree viewing angle. The RGB LED backlit keyboard seamlessly integrates with the car’s dashboard. When audio streaming from the B-CON is active, the main fast forward (FFW) and rewind (RRW) controls will be available on the DRC MP CAN display. The joystick allows for easy navigation of the menu, providing quick access to main functions such as master volume, subwoofer volume, mute, and more. This controller offers perfect integration with the B-CON and B-CON go app, allowing full control of audio streaming when the B-CON is present. The master volume can be managed both from the DRC MP CAN and the mobile device, with real-time synchronization with the app. The device allows for the selection of up to six DSP memories, offering maximum flexibility for any audio needs. Additionally, the Audison DRC MP CAN enables the activation and deactivation of the Final EQ and manages the different zones configured in the bit Drive software. The provided cable features the same terminations as the DRC AC, ensuring a quick and straightforward connection.
Features
Broad Compatibility: Specifically designed to work with Audison Forza series amplifiers and any new Audison products equipped with the CAN BUS protocol.
Advanced Integration: Works flawlessly with the B-CON and B-CON go.
App, enabling: Audio streaming control when paired with a B-CON.
Master volume control: Via both the DRC MP CAN and your mobile device.
Real-time synchronization: With the B-CON go App for on-the-fly adjustments.
Versatile Memory Selection: Offers up to six DSP memory selections, allowing you to tailor the sound to your preference or driving scenario.
Sophisticated Design: Features an RGB LED backlit keyboard that blends seamlessly with your car’s dashboard aesthetics.
Comprehensive Control: Navigate through the menu with an intuitive joystick, providing quick access to essential functions like Master Volume, Sub Volume, Mute, and more.
Enhanced Visibility: The white OLED display boasts a wide viewing angle of 160 degrees, ensuring clear visibility under any cabin lighting conditions.
Custom Zone Management: Allows for managing different zones configured in the bit Drive SW.
EQ Control: Easy activation and deactivation of the Final EQ for perfect sound tuning.
AUDISON Bit Line - Bit Energy Storage Start & Stop...
$114.99
ES3 - BIT ENERGY STORAGE START & STOPIt prevents the processor from shutting down when turning on vehicles featuring the start & stop system. When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables.
AUDISON Bit Line - Stereo Passive Mixer 4Ch (Spm4)
$249.99
Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response.
AUDISON Bit Line - Universal Speakers Simulator 4Ch (Uss4)
$105.00
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved.
Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition. In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5
AUDISON Thesis Line - Mesh Grilles To Suit Audison Th...
$419.99
THG 6.5 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.
Dimensions
Dimension A
171.2 mm
Dimension B
24.5 mm
Dimension C
12 mm
AUDISON Forza Line - Cooling Kit For Afm Amplifiers
$249.99
The Audison AFM/AFC CLK accessories have been specially developed for the Audison Forza Max/Compact amplifier series.It consists of a metal bracket with airflow slots and a cooling fan, designed for quick installation on the Audison Forza Max/Compact amplifiers.AFM/AFC CLK is highly recommended when installing the amplifier in very tight spaces with limited airflow to ensure optimal performance and durability in difficult conditions.
Features:
Compact Design: The robust metal housing of the AFM/AFC CLK fits perfectly into the Forza heatsink and ensures optimal airflow through strategically placed slots.
Quick Installation: The mounting is done via plastic nuts without any additional measures, so AFM/AFC CLK can be easily can be integrated into existing installations. The power harness with remote input prevents unwanted current draw when the system is turned off.
Efficient cooling: AFM/AFC CLK is equipped with a low-noise and fast cooling fan. The built-in electronics monitors the heatsink temperature in real time via the integrated sensor, activates the fan at a certain threshold and controls its speed according to the power/heat dynamics. This ensures efficient operation and extends the life of the amplifier by preventing overheating.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
