Thanks to the IP67 water resistance rating, the HMR BT Bluetooth® audio controller/receiver is ideal for small boat and Powersports applications. When connected directly to an amplifier, it can be used as a stand-alone source unit/receiver or it can provide Bluetooth® connectivity to any source unit with line-level inputs. The white LED backlit push-button controls are always well visible at any hour of the day. Ready to have some serious fun with the HMR BT Bluetooth® Audio Controller/Receiver? weatherized face and rubber buttons (IP67 rating) buttons are backlit for day or night use built-in Bluetooth 5.0 marine digital media receiver made for off-road and marine use weatherized face and rubber buttons (IP67 rating) buttons are backlit for day or night use built-in Bluetooth 5.0 rear-panel amplifier output cutout dimensions: 1.77" warranty: 1 year MFR # HMR BT Item # 301HMRBT   Specification FRONT PANEL IP RATING IP67 LINE OUTS 1x Stereo RCAs (left and right) FREQUENCY RESPONSE 20 Hz - 18 kHz (±1dB) S/N Ratio @ 4Vrms (THD <1%) 93 dB (20 Hz - 20 kHz) PREOUT VOLTAGE & IMPEDANCE 4V RMS / <100Ohm REMOTE OUT 8V - 24V OPERATING VOLTAGE 8V - 28V Fuse 2A OPERATING TEMPERATURE RANGE -10°C - 50°C Sources BLUETOOTH® 5.0Audio streamingMax distance 10 m / 30 ft. A2DP / AVRCP Playback Qualcomm® APTX low latency CD quality streaming REMOTE CONTROL HMC U1 Size & Mounting Mounting Hole diameter mm (in.) Ø 45 (1.77) Mounting Method Panel mount (4 screws); U-Bracket Physical Specs A 73,2 - 2.9 (mm - in.) A1 64,1 - 2.5 (mm - in.) B 63,7 - 2.5 (mm - in.) B1 27,7 - 1.09 (mm - in.) C 39,1 - 1.54 (mm - in.) D 16,7 - 0.66 (mm - in.) E 55,8 - 2.2 (mm - in.)

The Audison APBXKIT makes it easy to connect and power compatible Audison subwoofer enclosures. Designed for a clean and reliable installation, it ensures your subwoofer performs at its best without unnecessary hassle. Built with quality materials for lasting durability, this kit is ideal for achieving a secure, efficient setup. Check compatibility with your subwoofer before purchase and have it installed by us or a qualified technician for optimal results.

The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:1. OEM, for an easy and correct factory placement2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations3. Spoke grille: for maximum acoustic performance with a-pillar installationsThanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:1. Watch band2. Double-angle cup3. Flush Mounting Ring4. Metal mounting springTechnical SpecificationsSize: 29 mm (1.14″)Power Handling: Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance: 8 ΩFrequency Response: 1,2 ÷ 25 kHzCrossover name: APCX P 2TCrossover Type: High Pass, 4kHz, 12 dB/oct.Crossover adjustment: Tweeter Level: 0 / +3 dBSensitivity: 92 dB/SplMagnet: NeodymiumTweeter Voice Coil Ø: 25 mm (1″)Dome: Tetolon fibre

The Audison SB10SA1 is a great option for adding powerful bass to your car audio system. This sealed Aerpro 10″ Loaded Slimline Subwoofer Box is designed to save space, with dimensions of 341mm (H) x 485mm (W) and a tapered depth of 85mm to 135mm, making it easy to install in most vehicles. With an internal volume of 11.31 litres and a 232mm mounting cutout, it provides an ideal setup for clean, punchy bass. The APS10D 800W Subwoofer used is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice coil features push connectors for ease of wiring and configuration. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However, reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dust cap-basket geometry which guarantees large excursion of the mobile group while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking – -mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom – plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Please Note: The slimline subwoofer box used is the Aerpro SB10S and is not made by Audison. Features: Fits easily in most vehicles without taking up too much space, thanks to its slimline dimensions and tapered depth. Sealed Enclosure Enhances sound clarity and delivers tight, punchy bass for a more precise audio experience. Durable 12mm MDF Construction ensures long-lasting performance while minimising vibrations for better sound quality. Spring-Loaded Banana Socket Terminals allow quick, secure, and hassle-free wiring connections. Black Carpet Finish blends seamlessly with most car interiors while protecting the enclosure from scratches and wear. Specially designed cone, dust cap, and basket geometry ensure long linear excursion capability (11mm, One Way) keeping mounting depth to a minimum. Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure. Massive motor assembly, optimized with FEM (Finite Element Modelling) for perfect control under high power, high excursion conditions. Water-repellent pressed paper 10-inch cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer. Designed and engineered to deliver exceptional performance in a sealed enclosure, ensuring powerful bass and precise sound reproduction. A steel mesh grille and plastic gasket are integrated to protect the subwoofer, ensuring durability and safeguarding against damage. Specifications: Type: Sealed Enclosure Power Handling – MAX: 800W Power Handling – RMS: 400W Impedance: 2-Ohm Voice Coil: Dual (4 + 4) Volume: 11.31 Litres Construction: 12mm MDF Carpet Colour: Black Terminals: Spring-Loaded Banana Sockets Dimensions: (H)  341mm x (W) 485mm x Top (D) 85mm x Bottom (D) 135mm Weight: 9.80kg

Audison AP 260P&P I/O - ISO EXTENSION IN/OUT 260CM/102IN CONNECTION CABL

Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.

This Plug&Play harness allows the replacement of the OEM BMW amplifier with an Audison AP bit or AF bit amplifier on BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options and on BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system. The OEM seven-channel analog amplifier is connected via a forty-two-pin multipolar connector.   Features Compatible with BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options Compatible with BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system Compatible with Audison AF bit amplifier. The use of other products may require modifications and additional connections to the vehicle Compatible with AP F8.9 bit. The AP F IN ADP adapter is required for full P&P connection. Confirm proper application: APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable NOTE: AP BMW ASD BYPASS may also be required in vehicles that have the optional ASD “artificial exhaust sound” feature. Not compatible with current RAM-equipped BMW models using AFBMW ReAMP3, or with MOST-equipped 677/688 systems.

This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector. Features Retrieve the OEM source front and rear stereo audio signal. Route the AP FORZA amp outputs to each of the OEMamplifier seven channels:(Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)The Plug&Play terminals enable the user to choose whichAP FORZA amplifier output to connect to each of the sevenchannels of the OEM audio system.It is also possible to bridge the outputs of the AP FORZAamplifier. Keep the OEM amplifier on. The USS1 prevent the speaker diagnostic error of the centerchannel.

PRIMA T-HARNESS BMW T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution. *The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system. Features Designed specifically for your vehicle For maximum OEM integration. Connection to the AP Extension cable through ISO connectors Possibility to supply power to the amplifier via the direct cockpit current system Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution). ACC wire to re-launch ignition key signal to turn on / off an external device* *In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list

APTK 3 - AUDISON PRIMA TOWER KIT 3With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating. *Does not include Amplifiers*

The Audison C2O is a high–precision interface designed to convert both coaxial digital and analog AUX signals into a TOSLINK optical digital output. Supporting resolutions up to 24-bit / 192 kHz, the C2O ensures perfect integration between modern Hi-Res portable players, smartphones, and Audison processors equipped with an optical digital input. Thanks to its ultra-compact design, the C2O can be easily installed in hidden or tight spaces inside the vehicle, minimizing cable length and eliminating noise issues often caused by long signal paths. The C2O is the ideal solution for integrating Hi-Res audio sources into advanced Audison ecosystems, guaranteeing signal integrity, perfect compatibility, and a streamlined installation experience. Its intelligent design and premium components make it indispensable for achieving the highest sound quality in modern car audio systems Dual Input Conversion: Converts digital coax (75 Ω) and analog AUX (3.5 mm jack, including 4-pole types) into a high-quality TOSLINK optical output. High-Resolution Digital Output: From analog input: 24-bit / 48 kHz From coaxial digital input: 24-bit / 192 kHz Smart Input Management: Automatic input selection with priority to the AUX input. If no analog signal is detected, the device switches to the coaxial input after 6 seconds (adjustable to 9 or 12 seconds via internal switch). Noise-Free Signal Handling: The coaxial digital input features an isolation transformer to minimize electromagnetic interference (EMI), ensuring clean and stable signal transmission. Optimized Analog Input Stage: Integrated pre-amplifier with adjustable gain (0.1V to 2V) for perfect matching with various devices before high-quality A/D conversion. Flexible Power Supply Options: Operates from 6 to 30 VDC, with support for both classic remote turn-on and +12V REM trigger.

The Audison AVCX 3P is a three-way passive crossover meticulously engineered to facilitate bi-amplification and seamless integration within the Audison VOCE II series. This crossover is specifically designed to harmonize the performance of the AV 3.0 II midrange speaker with other VOCE II components, ensuring a coherent and balanced soundstage. The AVCX 3P’s design supports distinct amplification of the woofer, midrange, and tweeter, allowing for precise control over each frequency band. This setup is ideal for achieving the optimal blend of sound dynamics and clarity, tailored to the sophisticated setups demanded by modern car audio enthusiasts.

Audison AV CX 2W MB VOCE Series 2-Way Crossover - Tweeter + Woofer (Pair)Especially designed for the AV K5 and AV K6 two-way complete systems, shapes their acoustic response to achieve a consistent, harmonious sound in any vehicle, also offering the acoustic controls necessary to achieve the best balance according to one’s own taste.

Accessories | Plug&Play T-Harness to install Audison AF bit on BMW | Compatible with BMW “Standard” or “Hi-Fi” 676 system and BMW 688 Harman/Kardon This Plug&Play T-Harness allows to install an Audison AF bit amplifier on BMW vehicles equipped with RAM modules. It is compatible with "Standard" and "HI-FI" 676 sound systems (It is also compatible with 688 HK-branded systems, but only delivers 7 of the 9 channels required). This harness delivers the 7 speaker-level outputs of the RAM to the inputs of your AF amplifier and also provides speaker leads for front, rear, underseat woofer, and center - so you can configure your AF amplifier as desired. NOTE: not compatible with AP BMW ASD BYPASS – Active Sound “artificial exhaust note” defeat requires vehicle coding.

The Bit DMI is a high-quality digital interface designed to connect the original digital sources of a vehicle with Audison signal processors, ensuring a signal transmission free from disturbances and without loss of quality. This device allows you to maintain the original functionalities of the vehicle's audio system while integrating high-end audio solutions for a superior listening experience. The Bit DMI is compatible with the digital systems of major automotive manufacturers, thanks to its ability to convert native digital signals into signals compatible with signal processors. This ensures a faithful audio reproduction, preserving the integrity of the original sound and enhancing its quality through the advanced signal management provided by Audison processors. Installing the Bit DMI is simple and non-invasive, designed to integrate perfectly with the vehicle's onboard electronics without compromising the original functionalities of the system. Moreover, its compact and discreet design allows for flexible installation in different types of vehicles, without requiring substantial modifications. In summary, the Bit DMI is an ideal solution for those who want to enhance their vehicle's audio performance while maintaining compatibility with the original systems, ensuring excellent sound quality and perfect integration with the existing instrumentation.   Features MOST optical input The Audison bit DMI connects via optical fiber to the OEM multimedia system. S/PDIF optical output to transfer audio data in Stereo PCM 16bit format, 44.1kHz/48kHz (depending on the system) for use with Audison products with digital input. Digital controls USB/mini B (2.0) for connection to your PC. Configuration via USB and the appropriate software, the Audison bit DMI can be programmed and updated to work with vehicles equipped with MOST technology. Start controls: the bitDMI switches on and off automatically upon activation or deactivation of the car’s MOST system and generates the Remote Out signal to turn on your amplifier Integration with the OEM source Volume, balance and tone controls are kept intact as well as service signals of the car audio system, such as the handsfree calls, navigator and parking sensors. bit DMI software Windows-based (Win2000, XP, Vista, Windows 7, Windows 8).

Audison Bit Nove DRC Signal Interface Processor with 6 Channels In and 9 Channels Out with 2 Optical Inputs works with Maestro AR with DRC AB Remote Included bit Nove is a powerhouse of technology fully dedicated to listening pleasure: since 2007, the year in which the bit One was first introduced, Audison has never stopped delivering innovation to the digital processors segment. The bit Nove was born from this unique know-how within the industry, the perfect tool to expand a car audio system maximizing its performance.   POWER SUPPLY Voltage: 10.8 ÷ 15 VDC Operating power supply voltage: 7.5 ÷ 14.4 VDC Idling current: 0.53 A Switched off without DRC: 1 mA Switched off with DRC: 4.5 mA Remote IN voltage:4 ÷ 15 VDC (1mA) Remote OUT voltage: 10 ÷ 15 VDC (130 mA) ART (Automatic Remote Turn ON): 2 ÷ 7 VDC SIGNAL STAGE Distortion - THD @ 1 kHz, 1 VRMS Output: 0.005% Bandwidth @ -3 dB: 10 Hz ÷ 22 kHz S/N ratio @ A weighted Master Input: 102 dBA AUX Input: 101.5 dBA OPTICAL IN1 / IN2 Inputs: 110 dBA Channel Separation @ 1 kHz: 85 dBA Input sensitivity Pre Master: 1.2 ÷ 8 VRMS Input sensitivity Speaker Master: 3 ÷ 20 VRMS Input sensitivity AUX Master: 0.3 ÷ 5 VRMS Input impedance Pre In / Speaker In / AUX: 15 kΩ / 12 Ω / 15 kΩ Max Output Level (RMS) @ 0.1% THD: 4 V INPUT STAGE Low level (Pre): Ch1 ÷ Ch6; AUX L/R High Level (Speaker In): Ch1 ÷ Ch6 Digital: 2 x Optical S/PDIF; Max 192 kHz / 24 bit OUTPUT STAGE Low level (Pre): Ch1 ÷ Ch9 CONNECTION From / To Personal Computer: 1 x Micro USB To Audison DRC AB / DRC MP: 1 x AC Link Optical 2 sel: Optical In 2 wire control +12 V enable Mem D sel: Memory D wire control GND enable CROSSOVER Filter type: Full / Hi pass / Low Pass / Band Pass Filter mode and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB Crossover Frequency: 68 steps @ 20 ÷ 20k Hz Phase control: 0° / 180° EQUALIZER (20 ÷ 20K Hz) Analog Input: Equalizer Automatic De-Equalization Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz TIME ALIGNMENT Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inches Delay: 0 ÷ 15 ms Step: 0,08 ms; 2,8 cm / 1.1 inch Fine: SET 0,02 ms; 0,7 cm / 0.27 inch GENERAL REQUIREMENTS PC connections: USB 1.1 / 2.0 / 3.0 Compatible Software/PC requirements: Microsoft Windows (32/64 bit): Vista, Windows 7, Windows 8, Windows 10 Video Resolution with screen resize: min. 1024 x 600 Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F) SIZE W (Width) x H (Height) x D (Depth) mm/inch: 130 x 34.5 x 199 / 5.11” x 1.35” x 7.83”

The Audison Bit Ten is a versatile and high-performance digital signal processor designed to enhance and optimize your vehicle's audio system, transforming any setup into a high-quality sound system. Thanks to its ability to manage and process audio signals with precision and detail, the Bit Ten allows you to achieve a balanced and faithful sound, perfectly adapted to the acoustic characteristics of the cabin. This device allows you to connect original or aftermarket audio sources, providing complete control over every aspect of the sound through an intuitive and advanced user interface. The Bit Ten offers the ability to adjust equalization parameters, crossover filters, and time delay management, allowing for sound optimization according to the specific needs of the user and the vehicle. Installing the Bit Ten is simple and flexible, designed to easily integrate with a wide range of car audio systems, whether existing or new. Thanks to its compact size and versatility, the Bit Ten can be installed in various locations within the cabin without taking up excessive space. The Bit Ten stands out for its ability to significantly improve the audio quality of the vehicle's system, turning every trip into a superior listening experience. This digital processor is the ideal choice for those who want to customize and perfect their audio system, ensuring clear, powerful, and high-fidelity sound in any situation.   DSP Tech Data Nominal power supply voltage / Fuse 11 ÷ 15 VDC Channels 5 Sample Rate 24 bit / 48 kHz Hi Level Inputs 4 Low Level Inputs 4 Digital Inputs 0 Processing Method Fixed point Idling current 0.4 A Switched off without DRC MP 2.5 mA Switched off with DRC MP 4 mA Remote IN 7 ÷ 15 VDC (1.3 mA) Remote OUT 12 VDC (130 mA) Signal Stage Distortion - THD @ 1 kHz, 1 VRMS Output 0.005 % Bandwidth @ -3 dB 10 ÷ 22k Hz S/N ratio @ A weighted, 4 V Output, 2 V MASTER input 96 dBA S/N ratio @ A weighted, 4 V Output, OPTICAL IN1/IN2 input 95 dBA Channel Separation @ 1 kHz 85 dB Input sensitivity AUX 0.6 ÷ 5 V RMS Input impedance Pre In 15 kΩ Input impedance Speaker In / AUX 2,2 kΩ Max Output Level 0.1% THD 4 V RMS Input Stage Low level (Pre) AUX IN High Level (Speaker In) FL - FR - RL - RR - PHONE IN Output Stage Low level (Pre) FRONT L/R, REAR L/R, SUB Connection From / To Personal Computer 1 x USB / B (1.1/2.0) Crossover Filter type Full / High Pass/ Low Pass/ Band Pass Filter mode and slope Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB Crossover Frequency 68 steps @ 20 ÷20k Hz Phase control 0° ÷ 180° Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 in. Delay 0 ÷ 15 ms Step 0,08 ms; 2,8 cm / 1.1 in.

RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.

The Audison DRC AB is a sophisticated remote control unit designed to enhance your vehicle's audio experience. This advanced device allows you to manage and customize your car's audio system with precision and ease. The DRC AB features an intuitive interface that lets you control all key audio functions, such as volume, sound sources, and equalizer settings, directly from the dashboard. The unit's sleek and compact design makes it easy to integrate into the vehicle's dashboard without compromising the interior's aesthetics. The clear, easy-to-read display provides real-time information about audio settings, ensuring immediate control and minimal distraction while driving. One of the main features of the DRC AB is its ability to manage and save custom presets. This allows users to store their preferred audio settings and access them quickly, facilitating adjustments to different musical styles and driving conditions. Additionally, the DRC AB supports managing multiple audio zones, making it ideal for vehicles with complex audio setups or multiple amplifiers. This functionality enables independent sound control in different areas of the vehicle, providing an optimal audio experience for all passengers. Installation of the DRC AB is straightforward and quick, thanks to its compatibility with a wide range of Audison processors and interfaces. This device offers a versatile and powerful solution for car audio enthusiasts seeking precise and customizable control of their audio system. In summary, the Audison DRC AB is the perfect choice for those who want advanced and intuitive control of their audio system, significantly enhancing the listening experience while driving.   Features Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Main, Aux 1,Digital Optical 1 2). Audison bit Nove memories selection.

Adjust master volume, tweak subwoofer level, switch sources, and recall DSP presets in seconds. Designed for a seamless OEM-style fit, it blends perfectly into any interior while RGB LED indicators keep everything clear, day or night. With a single cable for power and control, installation is fast and clean. Fully compatible with a wide range of Audison processors, the DRC AC is your perfect interface for precision sound with a touch of style. Features • RGB LED Feedback: colored LEDs show volume position and active functions, making control simple and intuitive. • Software Programmable Functions: use bit Drive software to assign up to 5 custom functions, each with its own LED color. • Compatible with DSPs featuring CANBUS: works with Audison DSPs equipped with CANBUS communication via the DRCC port. • Compact and Easy to Install:  choose surface or flush mounting to match your vehicle’s style. • One Cable, Zero Hassle: a single DRCC cable handles both power and control for fast and clean installation. • Automatic LED Sleep Mode: LEDs dim after 5 seconds of inactivity for a minimal and elegant dashboard. • Updatable Firmware: stay current with simple PC firmware updates for future enhancements.