INEOS Grenadier 4WD Parts and Off-Road Accessories

Introducing the VSS System for the Ineos Grenadier 90W Bonnet Solar Panel, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  90W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 90W Maximum Power Voltage (Vmp) 17.5V Open Circuit Voltage (Voc) 20.65V Maximum Power Current (Imp) 5.18A Short Circuit Current (Isc) 5.65A

POLYAIR Ultimate Airbag Load Assist Kit for INEOS Grenadier 2023-On – Standard Height Improve load carrying performance, towing stability and ride comfort with the POLYAIR Ultimate Airbag Load Assist Kit for the INEOS Grenadier. Designed specifically for standard height suspension setups, this heavy-duty airbag system provides additional rear suspension support when towing or carrying heavy loads. Whether your Grenadier is set up for touring, towing or off-road adventures, the Polyair Ultimate system helps maintain correct ride height, reduce suspension sag and improve overall vehicle control under varying load conditions. Key Features Designed specifically for INEOS Grenadier models Suitable for standard height suspension vehicles Ultimate Series heavy-duty airbag suspension support Helps reduce rear-end sag and suspension squat Improves towing stability and vehicle handling Adjustable air pressure for varying load requirements Supports factory suspension performance Suitable for towing, touring and off-road applications Durable polyurethane air spring construction Vehicle-specific mounting hardware included Benefits of Polyair Airbag Suspension Polyair airbags are designed to work alongside your vehicle's existing suspension system, providing additional support when carrying loads or towing. By helping maintain a level ride height, the system can improve steering response, braking performance and overall driving stability. The adjustable air pressure design allows you to tailor suspension support to suit changing load conditions, helping improve comfort and control whether travelling on-road or off-road. Vehicle Compatibility INEOS Grenadier Years: 2023-On Suspension Height: Standard Height Series: Ultimate Part Number: 92093ULT SKU: 92093ULT What's Included Polyair Ultimate air springs Vehicle-specific mounting brackets Air line and fittings Installation hardware Fitting instructions Important Information Polyair airbags are designed to assist load carrying and towing stability. They do not increase the vehicle's legal GVM, axle ratings or towing capacity. Always operate your vehicle within the manufacturer's specified limits.

Turn your Ineos Grenadier Quartermaster Double Cab into the ultimate gear with this tough Slimline II Roof Rack kit. Now it can go anywhere while carrying a decent load of camping or sports gear on the roof rack at the same time. This 954mm/37.6" long, 1/2 size, Slimline II cargo carrying roof rack kit for your Ineos Grenadier Quartermaster contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.Installs easily with no drilling required. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KRIG004T - Ineos Grenadier Quartermaster (2023-Current) Slimline II 1/2 Roof Rack Kit Consisting of: 3x LASS040 - Leg Spacer 10mm (Pair) 3x LASS047 - Ineos Grenadier Mounting Leg / 225mm (Pair) 1x RRSTP05 - SLII Tray - 1575mm(W)X954mm(L) Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 24.82kg (54.72lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 295mm (12") Shipping Weight: Weight: 30kg (66lbs)