Subaru AWD and Off-Road Accessories

Introducing the VSS System for the Subaru Outback (2009 - 2019), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  90W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 90W Maximum Power Voltage (Vmp) 18V Open Circuit Voltage (Voc) 21.24V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Introducing the VSS System for the Subaru Outback (2020 - current), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  65W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 65W Maximum Power Voltage (Vmp) 18.5V Open Circuit Voltage (Voc) 22V Maximum Power Current (Imp) 3.5A Short Circuit Current (Isc) 3.89A

Introducing the VSS System for the  Subaru Forester (2002-2013), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System. Key Features:  85W of clean solar energy to keep your battery topped up when the engine isn't running. Rugged “Marine-Grade” construction to withstand extreme environmental conditions. Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery. Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install. 3-year warranty. Approximate Installation Time - 1.5 Hours  Installation Difficulty - Easy Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools. – Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure. – Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure. – Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours. We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years. The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System? This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates. Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits. In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel. Will the VSS System work with my battery? The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries. *we do not recommend the use of Optima Batteries with the VSS system. Can it be removed? Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features Power 85W Maximum Power Voltage (Vmp) 17V Open Circuit Voltage (Voc) 21V Maximum Power Current (Imp) 5A Short Circuit Current (Isc) 5.5A

Coil SumoSprings are made from the same material as our other SumoSprings products – a micro-cellular polyurethane that decreases vibration, stabilizes sway, and tightens up your existing factory coils. This upgrade adds up to 30% additional capacity to your coils, creating a cushion effect and stopping unwanted dip and roll. Decreases vibration for a smoother ride Stabilizes sway for enhanced control Tightens existing factory coils for better handling Adds up to 30% additional capacity Creates a cushion effect for comfort Stops unwanted dip and roll for safety Specifications Weight: 2 lbs Dimensions: 10.75 × 7.25 × 4.5 in Spring Diameter: 6.5'' Spring Height: 3'' Capacity: Coil capacity increased by 15% to 30% Features & Benefits Left/Right Pair Proudly made in the USA InstallationInstallationInstall Guide 1Important Notes Application(s) Summary: Chevrolet Equinox 4 X 2 (2010-2015) ; Dodge Charger 4 X 2 (2011-2013) ; Dodge Durango 4 X 2 (2011-2013) ; Ford Escape 4 X 2 (2008-2013) ; Ford Expedition 4 X 2 (1997-2002) ; Ford Explorer 4 X 2 (2013-2013) ; Ford F-450 Super Duty 4 X 2 (2005-2014) ; Ford F-450 Super Duty 4 X 4 (2005-2014) ; Ford F-550 Super Duty 4 X 2 (2005-2014) ; Ford F-550 Super Duty 4 X 4 (2005-2014) ; Ford Transit Connect 4 X 2 (2014-2015) ; Honda Element 4 X 2 (2003-2011) ; Honda Odyssey 4 X 2 (1999-2004) ; Hyundai Santa Fe 4 X 2 (2013-2013) ; Lincoln MKX 4 X 2 (2007-2014) ; Mercury Grand Marquis 4 X 2 (2003-2011) ; Mitsubishi Montero 4 X 2 (2001-2001) ; Nissan Patrol 4 X 2 (2010-2020) ; Nissan Patrol 4 X 4 (2010-2020) ; Nissan Titan 4 X 2 (2004-2015) ; RAM 1500 4 X 2 (2014-2015) ; Toyota 4Runner 4 X 2 (1996-2023) ; Toyota Highlander 4 X 4 (2008-2015) ; Volkswagen Jetta 4 X 2 (2005-2013) ; Volvo V50 4 X 2 (2005-2011) ; Toyota Land Cruiser 4 X 2 (2008-2023) ; Toyota Land Cruiser 4 X 4 (2008-2023)

Improves vehicle stability and handling Enhances ride comfort for passengers Reduces body roll during turns Supports heavy loads without sagging Easy installation with no modifications required Durable construction for long-lasting performance Specifications Weight: 3 lbs Dimensions: 10.75 × 7.25 × 4.5 in Spring Diameter: 6.25'' Spring Height: 3'' Features & Benefits Left/Right Pair Proudly made in the USA InstallationInstallationInstall Guide 1Important Notes Confirm correct product using the col gap tool found at https://superspringsinternational.com/wp-content/uploads/Coil_Gap_Tool_Coil_SumoSpring_Coil_Gap_Tool_1_kpxdwx.pdf

Coil SumoSprings are made from the same material as our other SumoSprings products – a micro-cellular polyurethane that decreases vibration, stabilizes sway, and tightens up your existing factory coils. This upgrade adds up to 30% additional capacity to your coils, creating a cushion effect and stopping unwanted dip and roll. Decreases vibration for a smoother ride Stabilizes sway for enhanced control Tightens existing factory coils for better handling Adds up to 30% additional capacity Creates a cushion effect for comfort Stops unwanted dip and roll for safety Specifications Weight: 2 lbs Dimensions: 10.75 × 7.25 × 4.5 in Spring Diameter: 6'' Spring Height: 2.5'' Capacity: Coil capacity increased by 15% to 30% Features & Benefits Left/Right Pair Proudly made in the USA InstallationInstallationInstall Guide 1

Coil SumoSprings are made from the same material as our other SumoSprings products – a micro-cellular polyurethane that decreases vibration, stabilizes sway, and tightens up your existing factory coils. This upgrade adds up to 30% additional capacity to your coils, creating a cushion effect and stopping unwanted dip and roll. Decreases vibration for a smoother ride Stabilizes sway for enhanced control Tightens existing factory coils for better handling Adds up to 30% additional capacity Creates a cushion effect for comfort Stops unwanted dip and roll for safety Specifications Weight: 2 lbs Dimensions: 10.75 × 7.25 × 4.5 in Spring Diameter: 6'' Spring Height: 2.25'' Capacity: Coil capacity increased by 15% to 30% Features & Benefits Left/Right Pair Proudly made in the USA InstallationInstallationInstall Guide 1Important Notes Application(s) Summary: Dodge Intrepid 4 X 2 (1998-2004) ; Ford Bronco 4 X 2 (2021-2023) ; Ford Bronco 4 X 4 (2021-2023) ; Ford Expedition 4 X 4 (2006-2020) ; Ford Explorer 4 X 2 (2000-2010) ; Ford Explorer 4 X 4 (2000-2010) ; Ford F-150 4 X 2 (2004-2023) ; Ford F-150 4 X 4 (2004-2023) ; Ford F-150 Raptor 4 X 4 (2010-2014) ; Ford F-150 Raptor 4 X 4 (2017-2020) ; Ford F-250 Super Duty 4 X 2 (2011-2016) ; Ford Freestyle 4 X 2 (2005-2007) ; Ford Windstar 4 X 2 (1995-2003) ; Lincoln MKX 4 X 2 (2007-2014) ; Mitsubishi Montero 4 X 4 (2001-2001) ; Nissan Xterra 4 X 2 (2005-2013) ; Nissan Xterra 4 X 4 (2005-2013) ; Subaru Outback 4 X 4 (2004-2014) ; Volkswagen Touareg 4 X 4 (2010-2011) ; Chevrolet Colorado 4 X 2 (2015-2023); Chevrolet Colorado 4 X 4 (2015-2023); GMC Canyon 4 X 2 (2015-2023); Jeep Wrangler 4 X 2 (2018-2023); Nissan Frontier 4 X 4 (2005-2023)

Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable. Our patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment. GENERAL SPECIFICATIONS: Contains one 10TW3-D4 subwoofer in a sealed enclosure 400-watt power handling Wired for 2-ohm mono Installs in the passenger side of the trunk compartment Black steel mesh woofer grille is included

This 1156mm/45.5" long, full-size, Slimline II cargo carrying roof rack kit for the Subaru Outback contains Slimline II Tray, Wind Deflector and 4 Feet. Installs easily to factory mounting points with no drilling required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. This kit is compatible with the factory retractable cross bar roof rails with four anchor plates. It will not fit the low-profile rails found on the Touring model. All Front Runner Racks are backed by a Limited Lifetime Warranty* Note: Keep within vehicle roof load limits as specified by the manufacturer 68kg / 150 lbs. Note: The sunroof is not operational when this Rack Kit is installed. Features KRSO002T - Subaru Outback (2015-2019) Slimline II Roof Rail Rack Kit - by Front Runner Consisting of: 1x FASO001 - Subaru Outback(2015-Curr) Foot Set1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm   Material used: Black epoxy powder - coated T6 aluminium High strength steel   Approximate Installed Weight: 20.36kg (44.89lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 450mm (18"); Length: 1610mm (63"); Height: 200mm (8")   Shipping Weight: Weight: 23.21kg (51lbs) Compatibility

Get ready to light up the night while reducing drag and noise with this 40” Light Bar Wind Fairing for the Slimsport Rack on your Subaru Outback GEN 6. It also improves fuel consumption when you have bulky items on the rack and its durable rubber beading, found on the bottom edge, gives added protection when going over rough terrain.   Lightbar wind fairing for Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready. Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber beading is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Subaru Outback Slimsport Rack Light Bar Wind Fairing1 x Wind Fairing Rubber - 950mm (L)1 x Clear VinylInstallation HardwareFitting Instructions Materials used:Black powder-coated high strength steel Product Dimensions:73mm (2.9") L x 1145mm (45.1") W x 206mm (8.1") H Weight:2.99Kg (6.6lbs)

Reduce noise levels and improve the airflow over the Slimsport Roof Rack of your Subaru Outback GEN 6 with this easy-to-fit Wind Fairing. It certainly helps reduce fuel consumption on a loaded rack and its durable rubber beading, found on the bottom edge, gives added protection when going over rough terrain.   A wind fairing for the Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber beading is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Subaru Outback Slimsport Rack Wind Fairing1 x Wind Fairing Rubber - 950mm (L)1 x Clear VinylInstallation HardwareFitting Instructions Materials used:Black powder-coated high strength steel Product Dimensions:79mm (3.1") L x 1145mm (45.1") W x 201mm (7.9") H Weight:3.53Kg (7.8lbs)

Smooth out the ride in your Subaru XV Crosstrek in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.   A wind fairing for the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions Materials used:Black powder coated steel Product Dimensions:1140mm (44.9") L x 171mm (6.7") W x 129mm (5.1") H Weight:2.89kg (6.4lbs)

Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.   Lightbar wind fairing for . Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount. Air flows easily over the rack and accessories, reducing drag and wind noise. Helps fuel consumption while carrying bulky loads. A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain. Brackets and installation hardware included. Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel Product Dimensions:1140mm (44.9") L x 163.5mm (6.4") W x 116mm (4.6") H Weight:2.1kg (4.6lbs)

It’s never been easier to start your adventure with the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit. This low-profile rack lets you immediately enjoy the Great Outdoors with versatile accessories so you can build your own adventure and go! The Slimsport Roof Rack is ready to play.   Fits to existing factory holes with factory rails removed. Low-profile flat deck Slimsport rack has a load carrying area of 1474mm (58") x 1146mm (45.11"). Sleek side rails have integrated mounting feet with additional brace brackets for added strength. High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for all Front Runner side mount accessories (sold separately). Included standard full fairing with rubber edge trim makes the rack ultra-quiet. Need a lightbar? The optional Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (both sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables are not compatible with the Slimsport rack kit range All Front Runner Racks are backed by a Limited Lifetime Warranty* KSSX003T - Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack KitConsisting of:1 x Subaru XV Crosstrek (2017-2023) Slimsport Roof Rack Kit1 x RRAC235 - SUBARU XV CROS SLIMSPOT RACK WIND FAIRINGInstallation HardwareFitting InstructionsMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelAssembled Rack Kit Dimensions:1645mm (64.8") L x 1146mm (45.1") W x 169mm (6.7") HApproximate Installed Weight: 31.25kg (68.89lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 332mm (13")Length: 1696mm (67")Height: 171mm (7")Shipping Weight:Weight: 31.25kg (69lbs)

The Subaru XV Crosstrek 2nd Gen (2018-2023) Slimsport Roof Rack Kit is the key to your most fun adventures yet. It comes light bar ready, so you can keep the journey going into the after-hours. This durable, low-profile rack lets you immediately haul out to the Great Outdoors with a wide variety of compatible Front Runner accessories.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1474mm (58") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included in the Subaru XV Crosstrek (2017-2023) Slimsport is a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables are not compatible with Slimsport rack kits All Front Runner Racks are backed by a Limited Lifetime Warranty* KSSX002T - Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit / Lightbar readyConsisting of:1x KSSX001 - Subaru XV Crosstrek (2017-2023)Ssport RR K1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind FairingMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.15kg (75.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.Shipping Dimensions:Width: 330mm (13")Length: 1700mm (67")Height: 230mm (9")Shipping Weight:Weight: 35kg (77lbs)

Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and Lightbar-ready Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry sports, adventure or any other gear. Don't be afraid of using your Subaru in the dark as this rack already has a cutout for a 40" lightbar. This low-profile flat deck Slimsport rack has a load carrying area of 1999mm (78.7") x 1151mm (45.3"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included is the Subaru Outback GEN 6 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing which has a cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Sunroof fully operational in slide open and closed mode. Note: Sunroof not operational in vent / tilt mode. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Transform your Subaru Outback GEN 6 into an extraordinary gear carrier with the low-profile and lightweight Slimsport Roof Rack. This durable, user-friendly rack can be adapted to carry camping, sports, work, or any other gear. The multi-functional Slimsport Roof Rack will effortlessly do the job in the city and when off-road.   This low-profile flat deck Slimsport rack has a load-carrying area of 1999mm (78.7") x 1151mm (45.3"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Effortlessly access your Slimsport cargo with the Handle/Light Slimsport Rack Bracket. Easily add on the Slimsport Side Mount Accessory Bracket / Small (sold separately) for all Front Runner side mount accessories. The included standard full fairing with rubber edge trim makes the rack ultra-quiet. Need a lightbar? The optional (sold separately) has a 40" cutout to allow the use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). The fitment guide and all mounting hardware are included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Sunroof fully operational in slide open and closed mode. Note: Sunroof not operational in vent / tilt mode. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. All Front Runner Racks are backed by a Limited Lifetime Warranty*

Get ready for endless adventures when you fit the low-profile Slimsport Roof Rack to your Subaru Crosstrek. You can easily fit any Front Runner top mount accessories to the high-strength aluminium slats. Your Subaru is now ready for any gear needed for your adventures.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1633mm (64.3") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included is the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40” LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range. KSSC003T - Subaru Crosstrek(2023-Curr)Ssport RRack LightReady Consisting of:1x KSSC001 - Subaru Crosstrek (2023-Current) Slimsport Tray1x RRAC211 - Subaru XV Cros Slimspot Rack 40" LBar Wind Fairing Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel Assembled Rack Kit Dimensions:1633mm (64.3") L x 1146mm (45.12") W x 137mm (5.4") H Approximate Installed Weight: 25.22kg (55.6lbs) The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions:Width: 225mm (9")Length: 1700mm (67")Height: 235mm (9") Shipping Weight:Weight: 28kg (62lbs)

Get ready for awesome gear-carrying adventures when you fit this low-profile Slimsport Roof Rack to your Subaru Crosstrek. This tough rack has a large load-carrying area, and thanks to its high-strength aluminum slats, you can fit all Front Runner top mount accessories onto it.   Fits to existing factory holes with factory rails removed. This low-profile flat deck Slimsport rack has a load carrying area of 1640mm (64.6") x 1146mm (45.11"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional lightbar fairing Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack 40" Light Bar Wind Fairing (sold separately) has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation. Note: Drilling required. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport Tray range.