TJM
TJM AIRTEC SNORKEL WEDGETAIL POLYETHYLENE BLACK KIT FOR MERCEDES X-CLASS X220D/X250D
$549.00
Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This wedge-tail snorkel kit suits Mercedes X-Class 2018 4 cylinder diesel vehicle's. A must-have upgrade for any 4WD enthusiast, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compared to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and engineered to supply correct volume of air to engine
Suits: Mercedes X-Class 2018 diesel vehicle
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine
Package Weight: 5.05 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L2H1/144IN MWB/STANDARD ROOF) (2007-CURRENT) SLIMPRO VAN RACK KIT -KVMS002T
$2,195.00
$2,439.00
Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Mercedes-Benz Sprinter vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations.
Compatible with Mercedes-Benz Sprinter L2H1 144" MWB standard roof vans with a vehicle length of 5923mm / 233.2".
Load-carrying area: 3176mm (125") L x 1528mm (60.2").
Twelve (12) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:6x FAVF004 - Mercedes Sprinter Van Rack Foot Set1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit4x RRNS1425 - Narrow Slat / 1425mm (Pair)2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm LipMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.72kg (72.14lbs)Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 38kg (84lbs)
Torqit
TORQIT MODULEMAP: REMOTE REMAP FOR 2.3L X-CLASS (2018)MMP22-45
$1,791.00
$1,990.00
MODULEMAP FOR MERCEDES X-CLASS 2.3L: 2018…
PERFORMANCE GAIN: 41KW / 130NM
Access your X-Class’s full potential with European race technology. A super-fast and powerful ECU programming tool, the ModuleMap allows you to calibrate and optimise your 2.3L, X-Class factory settings.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your vehicle safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your vehicle to stock performance
TJM
TJM AIRTEC SNORKEL POLYETHYLENE BLACK KIT FOR MERCEDES X-CLASS
$549.00
Give your vehicle a breath of fresh air with a TJM Airtec snorkel. This snorkel kit suits Mercedes X-Class 2018 4 cylinder diesel vehicles only. A must-have upgrade for any 4WD enthusiast, our snorkels offer greater fuel efficiency and less air filter clogging by taking advantage of cooler and cleaner air at roof level compared to air at bonnet level. Our snorkels are designed and engineered in Australia for uncompromised performance.
Specifications
Material: High grade UV resistant polyethylene (UV20-UV24) Stainless steel fixture
Size: Australian made and engineered to supply correct volume of air to engine
Suits: Mercedes X-Class 2018 4 cylinder diesel vehicle
Tech: Traditional style air ram separates rain or moisture from airstream before it enters engine
Package Weight: 5.05 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
FOCAL
Focal -Iw-Mbz-Yiso - Mercedes Benz Iso Cable Harness -IW-MBZ-YISO
$120.00
The Focal Inside I IW MBZ Y-ISO HARNESS car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Mercedes original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : E-class from 2016, S-class from 2013, C-class from 2014 until 2019
Front Runner
FRONT RUNNER MERCEDES-BENZ V-CLASS L2 / METRIS 126WB (2014-CURRENT) SLIMLINE II ROOF RACK KIT KRMV020T
$2,710.00
$3,011.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables).
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
KRMV020T - Mercedes-Benz V-Class L2 / Metris 126"WB (2014-Current) Slimline II Roof Rack KitConsisting of:1x FAMV004 - Mercedes-Benz V Class LWB (2014-Current) Foot Rail1x RRSTJ14 - SLII Tray - 1425mm(W)X2772mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 49.81kg (109.81lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 255mm (10")Shipping Weight:Weight: 53kg (117lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ VITO VIANO L1 (2003-2014) SLIMLINE II 1/2 ROOF RACK KIT KRMV030T
$1,713.00
$1,903.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L1. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRMV030T - Mercedes-Benz Vito Viano L1 (2003-2014) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.85kg (70.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 35kg (77lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ VITO VIANO L1 (2003-2014) SLIMLINE II ROOF RACK KIT KRMV031T
$2,543.00
$2,826.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L1. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRMV031T - Mercedes-Benz Vito Viano L1 (2003-2014) Slimline II Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.87kg (101.13lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 48kg (106lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ VITO VIANO L2 (2003-2014) SLIMLINE II ROOF RACK KIT KRMV027T
$2,710.00
$3,011.00
This 2772mm/109.1" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack (such as Front Runner tables).
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
Front Runner
FRONT RUNNER MERCEDES-BENZ VITO VIANO L2 (2003-2014) SLIMLINE II 1/2 ROOF RACK KIT KRMV026T
$1,743.00
$1,937.00
This 1358mm/ 53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit is only suitable for the wheelbase 3200mm/126" and the vehicle length 4993mm/196.6" (long). The kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Mercedes-Benz Vito Viano L2. Easily installs using the existing factory mounting points. No drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
Front Runner
FRONT RUNNER MERCEDES-BENZ V-CLASS L1 (2014-CURRENT) SLIMLINE II 1/2 ROOF RACK KIT KRMV025T
$1,713.00
$1,903.00
This 1358mm/53.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class L1 2014+. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The sunroof is not operational if a table is stored.
KRMV025T - Mercedes-Benz V-Class L1 (2014-Current) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.85kg (70.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 35kg (77lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ V-CLASS L1 (2014-CURRENT) SLIMLINE II ROOF RACK KIT KRMV024T
$2,543.00
$2,826.00
This 2570mm/101.2" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Mercedes-Benz V-Class L1 2014+. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: The sunroof is not operational if a table is stored.
KRMV024T - Mercedes-Benz V-Class L1 (2014-Current) Slimline II Roof Rack KitConsisting of:1x FAMV006 - Mercedes Benz V-Class SWB (14-Current) Foot Rail1x RRSTJ13 - SLII Tray - 1425mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.87kg (101.13lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 48kg (106lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ V-CLASS L2 / METRIS 126WB (2014-CURRENT) SLIMLINE II 1/2 ROOF RACK KIT...
$1,743.00
$1,937.00
This 1358mm/ 53.5" long, 1/2 size, Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Mercedes-Benz V-Class/Metris. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access a Front Runner under rack mount table (1 smaller prep table and 1 larger camp size table).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Not suitable for vehicles that are fitted with a glass roof/Sunroof.
KRMV021T - Mercedes-Benz V-Class L2 / Metris 126"WB (2014-Current) Slimline II 1/2 Roof Rack KitConsisting of:1x FAMV004 - Mercedes-Benz V Class LWB (2014-Current) Foot Rail1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.48kg (73.81lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 260mm (10")Shipping Weight:Weight: 38kg (84lbs)
TJM
XGS TOP STRUT MOUNT STEEL PART ONLY FOR MERCEDES X-CLASS X220D/X250D / NISSAN NAVARA D40...
$49.01
Top strut mount for insulator, steel part only. Use in conjunction with 659THB10L top strut mount insulator. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
0.85 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN PATHFINDER R51 08/05-02/10
NISSAN PATHFINDER R51 03/10-09/13
TJM
XGS TOP STRUT MOUNT RUBBER INSULATOR ONLY FOR MERCEDES X-CLASS X220D/X250D / NISSAN NAVARA
$29.00
Top strut mount insulator, requires steel part. Use in conjunction with 659THB10M top strut mount for insulator. TJM recommend the replacement of strut top assemblies every 100,000kms or when upgrading struts.
Package Weight:
0.15 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN PATHFINDER R51 08/05-02/10
NISSAN PATHFINDER R51 03/10-09/13
TJM
XGS COIL SPRINGS REAR RAISED 450KG / 300KG (PAIR) FOR MERCEDES X-CLASS X220D/X250D 04/18-08/20 4DR...
$450.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Rear
LBA:
300kg (D23) / 450kg (NP300)
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
15.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
TJM
XGS COIL SPRINGS REAR RAISED 200KG / 50-100KG (PAIR) FOR MERCEDES X-CLASS X220D/X250D / NISSAN...
$380.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Rear
LBA:
50-100kg (Nissan Navara D23) / 200kg (Mercedes X-Class/Nissan Navara NP300)
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
13.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
TJM
XGS COIL SPRINGS REAR RAISED 100KG (PAIR) FOR MERCEDES X-CLASS X220D/X250D 04/18-08/20 / NISSAN NAVARA...
$320.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Rear
LBA:
100kg
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
12.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
TJM
XGS COIL SPRINGS FRONT RAISED 50KG+ (PAIR) FOR MERCEDES X-CLASS X220D/X250D/ NISSAN NAVARA NP300 05/15-11/20...
$320.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
50kg+
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
12.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
TJM
XGS ADJUSTABLE PANHARD ROD FOR MERCEDES X-CLASS X220D/X250 / NISSAN NAVARA
$399.00
TJM XGS adjustable panhard rod to suit the raised vehicles. When raising some coil spring 4WD vehicles, the fixed length of the original front or rear panhard rod can cause the axle to shift. This creates an undesirable affect, allowing the axle to move forward and backwards, or from side to side. TJM XGS adjustable panhard rods are designed to eliminate this problem. Once installed, you can set the rod to the most appropriate position to accommodate the suspension style and lift height on your vehicle.
Package Weight:
7.50 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
TJM
XGS REPLACEMENT BUSH KIT FOR MERCEDES X-CLASS/ NISSAN NAVARA
$199.00
Installing a pair of XGS shock absorbers as part of a complete XGS Roamer 4x4 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. XGS shock absorbers will ensure your vehicle is 4x4 equipped and ready for your next adventure
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for vehicles carrying heavier loads
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-40mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
4.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA D40 11/05-01/10 Spanish Built
NISSAN NAVARA D40 02/10-05/15 Spanish Built
NISSAN NAVARA D40 01/08-05/15 Thai Built
NISSAN NAVARA D40 ST, ST-X V6 Diesel 03/11-12/14
TJM
XGS ROAMER BALANCE REAR SHOCK (EA) FOR MERCEDES X-CLASS X220D/X250D / NISSAN NAVARA NP300 /D23...
$199.00
Whether you are tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, installing XGS Roamer shock absorbers as part of a complete XGS Roamer 4x4 suspension upgrade will improve every aspect of your drive. You will be equipped for a smoother, more comfortable ride whilst also improving road handling, braking ability, noise and vibration. Get the most out of your vehicle both on and off road with XGS Roamer shock absorbers.
Shock Construction:
Twin Tube - 2mm inner tube wall & 1.5mm outer tube wall
Shock Design:
Nitrogen ChargedDesigned for everyday driving
Piston Bore:
40mm
Piston Rod:
18mm hard chrome plated
Lift:
0-40mm
Features:
High durability OE quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston seal
Package Weight:
4.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA NP300 08/15-11/20 DX-RX 2Dr C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 RX King C/C & P/Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
TJM
TJM PREMIUM CANOPY MERCEDES BENZ X-CLASS D/C CHISANA WHITE (IN STORE PICK-UP ONLY)
$4,799.00
Package Weight:
90.00 kg
TJM
TJM PREMIUM CANOPY D/C ROCK GREY METALLIC FOR MERCEDES X-CLASS X220D/X250D 04/18-08/20 4DR C/C &...
$4,799.00
The new TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. The TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
Colour:
Chisana White
Suit:
Dual Cab
Central Locking:
Fully Integrated Central Locking
Windows:
Front Window - Drop Down, Side Windows - Dual Lift Up
Construction:
Fiberglass
Finish:
Smooth exterior, felt lined interior
Light:
LED Brake Light ad LED Interior Light
Standard Accessories:
Roof Rail, Rear Spoiler
Optional Accessories:
Rhino Roof Racks (100 kg rated), Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
TJM
AUTO LEVELLING HEADLIGHT BRACKET FOR MERCEDES X-CLASS X220D/X250D / NISSAN NAVARA D23 S4 12/20-ON
$49.01
The headlight extension bracket is to extend the headlight levelling sensor bracket to better accommodate an increase in shock length and ride height suits Nissan Navara NP 300 with Hid headlights
Package Weight:
0.40 kg
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 RX 4Dr C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On PRO-4X
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
TJM
XGS SERIES 4000 XS FRONT STRUT FOR MERCEDES X-CLASS X220D/X250D 04/18-08/20 4DR C/C & P/UP
$199.00
Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle's ride handling, load carrying and towing capabilities. This S4000 front strut suits Nissan Mercedes X Class raised height vehicles. Whilst 4x4's have factory engineered suspension, it's usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. A TJM suspension upgrade will ensure your vehicle is 4x4 equipped and ready for your next adventure.
FEATURES:
Material:
Seamless welded twin tube design with 1.6mm outer tube wall
Size:
40mm Big bore piston with 20mm hard chromed piston rod and teflon banded piston seal
Suits:
Longer travel to suit lifted suspension with medium to heavy loads
Tech:
Adjustable spring seat. Multi stage velocity controlled valving with OE quality high durability long life bushes
Compatible Vehicles
MERCEDES X-CLASS X220D/X250D 04/18-08/20 4Dr C/C & P/Up
HSP
HSP TAIL ASSIST (WEIGHT REDUCTION + DAMPENER) SUITS MERCEDES X-CLASS -MX12
$249.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
MERCEDES-BENZ
X-CLASS
HSP
HSP 4X4 TAIL LOCK FITS MERCEDES-BENZ X-CLASS MX18
$249.00
The HSP TailGate Lock is a truly revolutionary product allowing you to sync your tailgate with your existing vehicle remote.
Works With Factory Remote
Unlike other units on the market, the TailGate Lock by HSP fully integrates with your existing factory key and runs in sync with your vehicle’s pre-programmed key functionality. This also includes working with proximity sensors, door handles and automatic timed lock functions.
Non-destructive, Plug and Play Installation
HSP have made the TailGate Lock so easy to install that it should take 45 minutes to install. The unique system is plug and play and the only system that does not require any drilling
Enhanced Security
The electronic TailGate Lock by HSP is one of the best ways to keep your tools safe. Did you know that most canopies simply ‘lip’ over the tailgate? Meaning that if your tailgate is unlocked it would be very easy for someone to force your tailgate open.
Features
Manufacturing Quality: Compliant to ISO9001
Cycle Testing: 100,000 switching cycles
Operating temperature: -40 to 80°C
Vibration resistance: 2.7g
Power Draw:
Current consumption (blocking current) 6.7A
Idling current 350MA
Voltage Range 9-15 (rated 12V)
Wiring: Plug and Play
Compatibility
MERCEDES-BENZ
X-CLASS
HSP
HSP LOAD SLIDE SUITS DUAL CAB MERCEDES X-CLASS -MX3
$1,749.00
The HSP Load Slide is a purpose-built, retractable bed slide. Each unit has an entirely custom cut platform, contouring to your specific vehicle and is designed to give better access and management of your cargo. In other words, it’s the ultimate slide tray for your ride.
75% Platform Extension
The Load Slide is operated via an easy-to-use handle that provides up to 75% extension beyond your tub. This provides simple and safe access to your goods when required.
250kg Weight Rating when Extended
Combining advanced engineering with heavy-duty materials means the Load Slide can handle up to 250kg of dispersed weight when fully extended.
Purpose Built Side Rails
The custom cut heavy duty side rails are also designed to contour around the edges acting as a barrier and anchor points. This means you can move more with less effort than ever before.
Custom Cut Platform
One size fits all is for baseball caps and shortcut products. Your vehicle is unique, just like you, and so is the HSP platform. Using advanced CNC routing machines, The HSP Load Slide is completely custom cut to suit your specific requirements so there is no space wasted.
Multiple Latching Positions
The HSP Load slide has multiple latching positions every 20 centimetres allowing the user to stop and latch the load slide by simply letting go of the handle.
Compatibility
MERCEDES-BENZ
X-CLASS
Front Runner
FRONT RUNNER MERCEDES-BENZ G-CLASS (2018-CURRENT) SLIMLINE II 1/2 ROOF RACK KIT -KRMG009T
$1,903.00
$2,114.00
This 1156mm/45.5 long, 1/2 size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your G-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG009T - Mercedes Benz G-Class (2018-Current) SLII 1/2 RR Kit
Consisting of:
1 x FAMG001 - Mercedes Benz G-Class (2019-Current) Foot Rails - by Front Runner
1 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (17.9")
Length 1610mm (63.4")
Height 240mm (9.5")
Shipping Weight:
Weight 32kg (72.5lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ G-CLASS (2018-CURRENT) SLIMLINE II ROOF RACK KIT -KRMG008T
$2,488.00
$2,765.00
This 1964mm/77.3 long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your G-Class. Easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG008T - Mercedes Benz G-Class (2018-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FAMG001 - Mercedes Benz G-Class (2019-Current) Foot Rails - by Front Runner
1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (80lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1610mm (63")
Height 240mm (9")
Shipping Weight:
Weight 42.1kg (92.5lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN (1979-2017) LOAD BAR KIT / GUTTER MOUNT -KRGW007
$501.00
$557.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 170mm Gutter Mount legs, 2 1475mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRGW007 - Mercedes Gelandewagen (1979-2017) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x LBSK017 - Roof Load Bar Pair 1475mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 120mm (5")
Length 1580mm (62")
Height 175mm (7")
Shipping Weight:
Weight 8.9kg (19.6lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN G CLASS (1979-2017) SLIMLINE II 3/4 ROOF RACK KIT -KRGW001L
$2,107.00
$2,341.00
This 1964mm/77.3" long 3/4 size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit is not suitable for under rack table fitment or Hard Shell Tent Mount Brackets.
Features
KRGW001L - Mercedes Gelandewagen G Class (1979-2017) Slimline II 3/4 Roof Rack Kit - by Front Runner
Consisting of:
3x LASS104 - No 4 Leg 170mm (Pair)1x RRSTM10 - SLII Tray - 1475mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 37.55kg (82.78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 37.59kg (83lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN G CLASS (1979-2017) SLIMLINE II 3/4 ROOF RACK KIT / TALL...
$2,082.00
$2,313.00
This 1964mm/77.3" long 3/4 size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGWT01L - Mercedes Gelandewagen G Class (1979-2017) Slimline II 3/4 Roof Rack Kit / Tall - by Front Runner
Consisting of:
3 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight: 37.8kg (83.1lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN G CLASS (1979-2017) SLIMLINE II ROOF RACK KIT -KRGW004L
$2,447.00
$2,719.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1255mm/49.4" (W) x 2368mm/93.2" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTD12 - Slimline II Tray - 1255mm(W) X 2368mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1255mm (49")Length 2368mm (93")Height 70mm (3")
Shipping Weight:
Weight 41.1kg (90.4lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN G CLASS (1979-2017) SLIMLINE II ROOF RACK KIT / TALL -KRGWT04L
$2,447.00
$2,719.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen G Class contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRGWT04L - Mercedes Gelandewagen G Class (1979-2017) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
4x LASS027 - Leg Spacer 6mm (Pair)4x LASS106 - No 6 Leg 195mm (Pair)1x RRSTM11 - SLII Tray - 1475mm(W)X2166mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 43.04kg (94.89lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 43.43kg (96lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN G CLASS (1979-2018) LADDER -LAMG003
$333.00
$370.00
Easily access the roof rack on your Mercedes-Benz Gelandewagen G Class with this durable four-step ladder. It is made from high-strength steel and can be mounted on either the left or right side.
*NOTE: Ladder not suitable for 2018 - Current models or models with rear fuel filler cap or twin rear wheel carriers.
The ladder allows easy access to the roof rack.
Secures to the rear of the Gelandewagen G Class using the roof gutter channel and the rear body panel of the vehicle.
The top of the ladder clamps onto the gutter channel while the lower section secures with 3M Dual Lock Tape. No drilling is required.
Fits Mercedes-Benz Gelandewagen G Class vehicles, with single or split rear doors.
This ladder is supplied with 2 mounting clamps, for left-hand side or right-hand side fitment.
Components are made of high-strength steel and aluminium and coated in the same weather-resistant black powder coating as the Front Runner rack.
Features
Consists of:
1 x Ladder
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminium
Black powder coated steel
Product Dimensions:
943mm (37.1") L x 166mm (6.5") W x 256mm (10.1") H
Weight:
4.4kg (9.7lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ GELANDEWAGEN SWB (1979-2011) SLIMLINE II ROOF RACK KIT -KRMG004T
$1,931.00
$2,146.00
This 1762mm/69.4" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Gelandewagen SWB contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRMG004T - Mercedes Gelandewagen SWB (1979-2011) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
3 x LASS104 - No 4 Leg 170mm (Pair) - by Front Runner
1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (66lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 250mm (10")
Shipping Weight:
Weight 34.9kg (76.8lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L1H1/128IN SWB/STANDARD ROOF) (2006-CURRENT) SLIMPRO VAN RACK KIT -KVMS001T
$1,990.00
$2,211.00
Compatible with Mercedes Benz Sprinter L1/H1 / 128"SWB standard roof vans with a vehicle length of 5267mm / 207.4".
Load-carrying area: 2570mmL (101.2") x 1528mmW (60.2").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS001T - Mercedes Benz Sprinter (L1H1/128" SWB/Standard Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2570mm (101.2") L x 1528mm (60.2") W x 143mm (5.6") H
Approximate Installed Weight: 15.1kg (33.29lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1720mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L1H2/128IN SWB/HIGH ROOF) (2006-CURRENT) SLIMPRO VAN RACK KIT -KVMS006T
$1,846.00
$2,051.00
Compatible with Mercedes Benz Sprinter L1/H2 / 128" SWB high roof vans with a vehicle length of 5267mm / 207.4".
Load-carrying area: 2569mm (101.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into the van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 107mm (4.2") height, or left in standard configuration at 157mm (6.2").
Compatible with most Front Runner side mount accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification is required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS006T - Mercedes Benz Sprinter (L1H2/128" SWB/high Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
2x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 14.54kg (32.06lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 165mm (6")
Shipping Weight:
Weight: 37kg (81lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L2H2/144IN MWB/HIGH ROOF) (2006-CURRENT) SLIMPRO VAN RACK KIT -KVMS003T
$2,051.00
$2,279.00
Compatible with Mercedes Benz Sprinter L2/H2 / 144"MWB High roof vans with a vehicle length of 5923mm / 233.2".
Load-carrying area: 3176mm (125") L x 1352mmW (53.2").
Twelve (12) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS003T - Mercedes Benz Sprinter (L2H2/144" MWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
6x FAVF004 - Mercedes Sprinter Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
4x RRNS1255 - Narrow Slat / 1255mm (Pair)
2x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
3176mm (125")L x 1352mm (53.2")W x 143mm (5.6")H
Approximate Installed Weight: 30.19kg (66.56lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 38kg (84lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L3H2/170IN LWB/HIGH ROOF) (2007-CURRENT) SLIMPRO VAN RACK KIT -KVMS004T
$2,581.00
$2,868.00
Compatible with Mercedes Benz Sprinter (L3H2/170" LWB) (2007-Current) high roof vans with a vehicle length of 6967mm / 274.3".
Load-carrying area: 4130mm (162.6") x 1352mm (53.2").
Fourteen (14) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS004T - Mercedes Benz Sprinter (L3H2/170" LWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
7x FAVF004 - Mercedes Sprinter Van Rack Foot Set
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
5x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4130mm (162.6") L x 1352mm (53.2") W x 143mm (5.6") H
Approximate Installed Weight: 18.39kg (40.54lbs)
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 160mm (6")
Shipping Weight:
Weight: 47kg (103lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER (L4H2/170IN XLWB/HIGH ROOF) (2007-CURRENT) SLIMPRO VAN RACK KIT -KVMS005T
$2,979.00
$3,310.00
Compatible with 2007-Current Mercedes Benz Sprinter (L4H2/170" XLWB) high roof vans with a vehicle length of 7367mm / 290".
Load-carrying area: 4534mm (178.5") x 1352mm (53.2").
Sixteen (16) Mounting Feet secure into van's existing factory mounting points.
Included Slat Bracket can be inverted for a lower profile at 99mm (3.9") height, or left in standard configuration at 143mm (5.6").
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVMS005T - Mercedes Benz Sprinter (L4H2/170" XLWB/High Roof) (2007-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
8x FAVF004 - Mercedes Sprinter Van Rack Foot Set
2x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit
6x RRNS1255 - Narrow Slat / 1255mm (Pair)
1x SPVT001 - Van Rack Side Profile / 1156mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x SPVT004 - Van Rack Side Profile / 1762mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
4534mm (178.5") L x 1352mm (53.2") W x 143mm (5.6")H
Approximate Installed Weight: 19.96kg (44lbs)
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 49.35kg (109lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 128IN/144IN/170IN / L1/L2/L3 / SWB/MWB/LWB WHEELBASE W/O OEM TRACKS (2006-CURRENT) SLIMLINE...
$3,216.00
$3,573.00
This 2312mm/91" long, 1/2 Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006+) contains 2 Slimline II Trays, Wind Deflector, Track set and 12 mounting Feet (6 per rack). Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS006T - Mercedes Benz Sprinter (2006-Current) Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 54kg (119lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 260mm (10")
Shipping Weight:
Weight 63.1kg (138.9lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 128IN/144IN/170IN / L1/L2/L3 / SWB/MWB/LWB WHEELBASE W/O OEM TRACKS (2006-CURRENT) SLIMLINE...
$2,174.00
$2,415.00
This 1560mm/61.4" long, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006+) contains the Slimline II Tray, Wind Deflector, Track set and 6 mounting Feet. Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS005T - Mercedes Benz Sprinter (2006-Current) Slimline II 1/4 Roof Rack Kit - by Front Runner
Consisting of:
3 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1800mm (71")
Height 260mm (10")
Shipping Weight:
Weight 41.2kg (90.7lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 144IN/170IN / L2/L3 / MWB/LWB WHEELBASE W/O OEM TRACKS (2006-CURRENT) SLIMLINE...
$3,102.00
$3,447.00
This 2772mm/109" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter contains Slimline II Tray, Wind Deflector, 2 Tracks and 8 Feet. Drilling is required for installation. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS008T - Merc Benz Sprinter2 Gen(2006-Curr)SLII RR Kit/Tall
Consisting of:
4 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 52.0kg (114.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18.0")
Length: 1805mm (71.0")
Height: 255mm (10.0")
Shipping Weight:
52.7kg (116.0lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 144IN/170IN / L2/L3 / MWB/LWB WHEELBASE W/OEM TRACKS (2006-CURRENT) SLIMLINE II...
$2,536.00
$2,818.00
This 2772mm/109" long full-size Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter contains Slimline II Tray, Wind Deflector and 8 Feet. It installs easily to factory mounting points with no drilling required. Fits the "Tall Roof" option only. Will not fit the "Standard/Low Roof".
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
This kit requires the OEM Mercedes roof tracks for fitment.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS004T - Merc Sprinter 144"/MWB w/OEM TRK(2006-Curr)SLII RR Kit
Consisting of:
4 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
4 x RRAC907 - Stud Plate MB Sprinter Track
1 x RRSTM14 - Slimline II Tray - 1475mm(W) X 2772mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 39kg (86lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 45.5kg (100.0lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 170IN/L3/LWB W/OEM TRACKS (2006-CURRENT) SLIMLINE II ROOF RACK KIT / TALL...
$3,179.00
$3,532.00
This 3120mm/122.8" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter (2006-Current) contains 2 Slimline II Trays, Wind Deflector and 12 Feet. Installs easily onto the existing factory/OEM roof tracks with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907/910) Mercedes Benz Sprinter Models.
Features
KRMS002T - Mercedes Benz Sprinter with OEM Tracks (2006-Current) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
6 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
6 x RRAC907 - Stud Plate MB Sprinter Track
2 x RRSTM08 - Slimline II Tray - 1475mm(W) x 1560mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 52kg (114lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 455mm (18")
Length 1615mm (64")
Height 215mm (8")
Shipping Weight:
Weight 60.1kg (132.3lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 170IN/L3/LWB WHEELBASE W/O OEM TRACKS (2006-CURRENT) SLIMLINE II ROOF RACK KIT...
$4,494.00
$4,993.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter without OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, Track set and 16 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS009T - Merc Sprinter170"/LWB w/OEM TRK ('06-Curr)SLII R RKit
Consisting of:
8 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
2 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
1 x TRMS001 - Mercedes Sprinter (2006-Current) Tracks / 3082mm-4098mm(L) - by Front Runner
1 x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W) - by Front Runner
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 77.4kg (170.6lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1800mm (71.0")
Height: 390mm (15.0")
Shipping Weight:
78.4kg (172.0lbs)
Front Runner
FRONT RUNNER MERCEDES-BENZ SPRINTER 170IN/L3/LWB WHEELBASE W/O OEM TRACKS (2006-CURRENT) SLIMLINE II ROOF RACK KIT...
$4,559.00
$5,065.00
This 3928mm/154.7" long, full-size, Slimline II cargo carrying roof rack kit for the Mercedes Benz Sprinter without OEM Tracks, contains 2 Slimline II Trays, Wind Deflector, Track set and 16 Feet. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Fits 2nd Gen (906) and 3rd Gen (907) Mercedes Benz Sprinter Models only.
Features
KRMS010T - Mercedes Benz Sprinter 170"/L3/LWB Wheelbase w/o OEM Tracks (2006-Current) Slimline II Roof Rack Kit / Tall - by Front Runner
Consisting of:
8x FASS017 - Foot Set / 75mm-85mm
2x RRSTM10 - SLII Tray - 1475mm(W)X1964mm(L)
1x TRMS001 - Mercedes Sprinter (2006-Curr) Tracks/3082-4098mmL
1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 78.48kg (173.02lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18")
Length: 1800mm (71")
Height: 390mm (15")
Shipping Weight:
Weight: 79.34kg (175lbs)
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
