JL AUDIO CP210-W0V3 DUAL 10W0V3 BASSWEDGE, PORTED, 2 Ω Product highlights •Dual 10" 10W0v3-4 Loaded Ported Enclosure • 1200W Peak • 600W RMS • Top-Quality MDF Construction • Durable Dark Gray Carpet Finish • Five-Way Binding Post Connectors • Embroidered JL Audio Logo Subwoofer Features Dual 10" W0v3 Series Subwoofer Manufacturer preloaded with a JL Audio 10W0v3-4 10" Subwoofer, JL Audio's best-selling subwoofer! Power Handling:RMS: 600 watts Recommended Power Range: 150 - 600 watts Impedance: 2-Ohm Mineral-filled, polypropylene cone woofer for excellent durability Large roll surround for generous amounts of excursion Elevated frame cooling brings air directly to the voice coil Designed for compact sealed enclosures or medium-sized ported enclosures Large excursion for louder bass and less distortion DMA Optimized motor system reduces distortion and tight, clean bass Lead wire woven into spider for added strength Metallic silver frame finish 2.0" High temperature voice coil Free Air Resonance (Fs): 32.09 Hz Sensitivity: 84.07 dB Xmax: 11.4 mm Reference Efficiency (no): 0.1500% Frequency response: ~26 ~ 250 Hz Black Steel-Mesh Grille Insert Available: JL Audio SGRU-10 Matching Amplifier: JL Audio XD600/1v2 JL Audio JX500/1D Authorized Internet Dealer 2 Year Manufacturer's Warranty Enclosure Features: 10" Slot Ported MDF Subwoofer Enclosure Loaded with two 10W0v3 10" subwoofers Designed for forward, rear or down-firing installation Top-quality MDF construction Durable dark gray carpet finish Five-Way binding post connectors Embroidered JL Audio logo Embroidered "Slot-Ported BassWedge" logo on port mouth 2 Ohm final impedance Dimensions: 17-1/2"TD x 14"BD x 29-5/8"W x 13-7/8"H JL Model ComparisonFrom entry level woofers to competition grade, JL has them all. Let us find which one works for you. Model RMS Power Cone Material Surround Material Sensitivity (dB) Frequency Response Xmax (mm Terminals Made In America W7 Series 500-1500 Watts Polypropylene Foam Overroll 82.7 - 86.3 15-250 Hz 19-32 Push Terminals Yes W6 Series 600 Watts Polypropylene Rubber 82.7 - 85.4 20-200 Hz 19 Push Terminals Yes W3 Series 150-600 Watts Polypropylene Rubber 80.5-87.90 20-250 Hz 8.89-15.5 Push Terminals Yes W1 Series 150-300 Watts Polypropylene Rubber 83.9-86.1 22-200 8-11 Push Terminals W0 Series 300-500 Watts Polypropylene Foam 84-88.20 20-250 Hz 11.4-12.7 Push Terminals WX Series 200 Watts Polypropylene Foam 86-87.17 22-250 Hz 10 Spade Terminals

R2-Series Premium Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the bass in your Single-Cab 70 Series — the next Generation R-Series are born to be played loud with the all-new R-Series ‘direct fit’ premium aftermarket speaker upgrade. Alpine’s premium sound solution has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge R2-Series 6×9” speakers, experience punchy, concise bass as well as uncompromised sound performance and richness possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-R houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are USB charge ports in both door pods that allow charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-R elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-R is the pinnacle of Hi-Fi sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch R2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-R combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 4x USB Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.   FEATURES Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design SPECIFICATIONS General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 60Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 160mm x 240mm Woofer Diameter (in): 6″ x 9″ Woofer Mounting Diameter (mm): 167mm Woofer Mounting Diameter (in): 6-19/32″ Woofer Mounting Depth (mm): 75mm Woofer Mounting Depth (in): 3″ COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

The Alpine DP-65C features a sleek, minimalist design that is stylish and functional. It utilises a carbon fibre woven diaphragm and aluminium materials, showcasing a sophisticated visual aesthetic and tactile texture. The next generation of Premium Speakers from Alpine. Alpine meticulously engineered the DP-65C Digital Precision (DP) Series speakers with precision to create a high-performance audio experience. Featuring a custom-designed machine-finished aluminium cast frame and an elegant backplate housing, these speakers also boast an industry-first blue-accented woven carbon fibre hybrid woofer diaphragm and a tweeter with an exotic magnesium alloy dome for exceptional high-frequency detail. The Alpine DP-65C's external crossover was designed using custom parts and air-core inductors to enhance sound transparency and achieve a seamless transition between high and low frequencies. These cutting-edge loudspeakers have a stunning aesthetic design and deliver an acoustic performance that matches their high-performance capabilities. Alpine engineered the DP-65C to accurately reproduce the dynamics of digital sound sources and recordings, providing an incredibly detailed high and mid-range response and powerful, controlled bass. This allows you to fully immerse yourself in the music, experiencing every nuance and richness of sound with precision and clarity. The DP series represents the perfect combination of precision design and exceptional sound performance. The first use of the new diaphragm material "Hybrid fibre.” Using carbon fibre in audio equipment has enhanced the richness and depth of low-frequency sounds, providing a more immersive listening experience. These unique properties work harmoniously to deliver a superior audio experience, ensuring every note is crisp and clear. By utilising a bass unit with a unified diaphragm material, the midtones achieve a seamless blend of sound sources across a broad spectrum. The hybrid woofer diaphragm, woven with carbon fibre, is rigid yet lightweight. This design ensures precise cone velocity and minimal distortion, resulting in a natural and highly detailed mid-range response with powerful bass extension. The speaker's appearance is stunning! With its sleek design and top-notch sound quality, this speaker is truly a showstopper. You won't be disappointed with this powerhouse of a speaker!   Magnesium Alloy Tweeter  The Magnesium alloy dome Tweeter Diaphragm is Lightweight and durable, effectively Preventing Distortion and Uncovering the subtle Nuances of music. This feature delivers a highly detailed and smooth high frequency response. The Magnesium alloy material can withstand high temperatures within a car, guaranteeing longevity without any degradation in performance. The aluminium-magnesium alloy tweeter accurately reproduces the intricate and celestial sounds musical instruments produce.   Aluminium Frame and Gold Plated Terminals  Precision-manufactured, the Aluminium frame is rigid for low Resonance and has six Mounting points for Optimised bass Coupling and Midrange response. The machine turned front and stunning back plate cover provide a classy finish, and the gold plated Terminals prevent connection Degradation. Low resistance with High Fidelity   HAMR Surround The Alpine's unique technology, H.A.M.R. (High Amplitude Multi-Roll) surround, adapts from a superior sound system, increasing output and superb sound quality. Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone travel for high SPL. The HAMR surround controls the cone for powerful bass and pure sound at any stage.     High-Quality Crossover The Alpine DP-65C Crossover has premium components like air core Inductors and Alpine Poly-Capacitors for precise electrical Clearance. This provides a clean signal path with a Seamless transition from high to low frequencies for premium audio performance.      6.5″ Honeycomb Grilles (Optional DP-65G) Enhance your high class show level system with the Alpine DP-65G woofer grilles (pair). The grilles have a Honeycomb design that matches the tweeter grille. Enhancing the look of your speaker system. Elevate the look of your setup with these stylish additions.     Speaker type 2-WAY COMPONENT SPEAKER   Frequency response 65Hz - 24KHz   Power handling 240 Watts peak power 50 Watts RMS power   Design H.A.M.R surround   Material Hybrid fiber (bulletproof fiber and carbon fiber) The aluminum-magnesium alloy tweeter Gold-plated terminals corrosion-resistant   Dimension Woofer mounting diameter : 165 mm Woofer mounting depth : 59 mm Network Width : 51.9mm Network Height : 30.9mm

GENERAL SPECIFICATIONSContinuous Power Handling (RMS): 600 WSystem Nominal Impedance: 2 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: NoPHYSICAL SPECIFICATIONSExternal Width (W): 31.375 in / 797 mmExternal Height (H): 15.18 in / 386 mmExternal Depth (D1)L 20.3 in / 516 mmExternal Top Surface Depth (D2): 15.75 in / 400 mmNet Weight: 60.3 lb / 27.35 kg

Enclosed Subwoofer System with Single 10W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω   General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No   Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg

S2-Series Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the volume in your Single-Cab 70 Series — the next Generation S-Series set the standard when it comes to phenomenal audio. Alpine’s premium sound solution for LC70 has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge S2-Series 6×9” speakers, experience clear, concise bass as well as best-in-class sound performance made possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-S houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are dual USB A & C charge ports in both door pods allowing charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-S elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-S is the pinnacle of accessible sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch S2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-S combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 2x USB-C / 2x USB-A Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Large Magnet Structure The large strontium magnets housed on the back of S-Series speakers mean business. Combined with large voice coils and Alpine’s patented HAMR Surrounds, increase cone excursion and the force of the driver to provide louder, punchier sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass.   FEATURES Front Tweeter 1″ Extended-Range Soft Dome Magnet Material: Neodymium Application Type: External/Swivel Tweeter Mounting Kit Flush mount and Collapsable for OEM fit. Grill: Perforated Net Front Woofer 6×9″ (160cm x 240cm) Lightweight Glass Fiber Composite Speaker HAMR (High Amplitude Multi-Roll) Surround Large 35mm Voice Coil Magnet Material: Strontium Ferrite Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Grade Audio Poly Capacitor Crossover Network Woofer: Copper Air-Coiled Wound Inductor Tweeter: High Grade Audio Poly Capacitor   SPECIFICATIONS Power Handling Peak Power: 260 Watts RMS Power: 85 Watts (CTA-2031 Compliant) Dimensions Woofer  Frame 237 mm x 161mm Cutout Diameter: 242mm x 152mm Mounting Depth: 74.5 mm Mounting Height: 7.3 mm Magnet: 100.0 mm Dimensions Tweeter Frame: 58mm Mounting Diameter: 51mm Mounting Depth: 17.6mm Height: 25.6 mm   COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

Pair of speaker grilles to suit 6.5" Speakers

Steel mesh grille insert for select JL Audio 10-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer’s grille receiver ring.

Steel mesh grille insert for select JL Audio 12-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer’s grille receiver ring.

2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter The C1-650se component system is engineered to deliver remarkable fidelity and outstanding value in a format that easily fits in factory locations. Outfitted with pure, silk dome tweeters, the C1-650se component system stands above others in its category with silky smooth, high-frequency clarity and definition. The 1-inch tweeter’s edge-driven design delivers excellent off-axis response and treble extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. Outboard, 3rd order, high-pass in-line filters, with Advanced Tweeter Protection Circuitry, are also included to guard against high-distortion damage and improve power handling. For maximum installation versatility, surface and flush tweeter mounts are also included.  C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low-distortion sound. At the core of the C1-650 woofer is a proprietary, stamped, steel 6.5-inch (165 mm) frame and DMA-optimized motor system. A mineral-filled, injection-molded, polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to each spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. To maximize fit, multi-application adaptor rings are included for the woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well.  When it comes to value, C1-650se is a real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 21 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.25 in / 159 mm Grille Tray Outer Diameter (B) 6.84 in / 174 mm Motor Outer Diameter (C) 3.15 in / 80 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion** (E) N/A Mounting Hole Diameter (F) 5.02 in / 128 mm Mounting Depth (G) 2.07 in / 53 mm *Does not take into account mounting tabs**Frontal grille protrusion measured from mounting surface Tweeter Physical Specifications Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm Flush Mount Mounting Hole Diameter (B) 1.75 in / 45 mm Flush Mount Mounting Depth (C) 0.40 in / 10 mm Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm Surface Mount Tweeter Frontal Protrusion (D2) 0.87 in / 22 mm

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS

The new SPS-M601 Silver 6.5" Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8" Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5" poly woofers handle the mid-range frequencies. On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they're tested against fog, salt and blazing sunlight so you can be sure they'll sound great for many seasons to come. For added convenience, included is a marine grade connection loom for a more robust installation. Technology ATSM B117 Salt/Fog Climate emulation test that consists of exposure to salt water, humidity and high temperature ATSM G154/D4329 UV High intensity accelerated weathering test that involves 500 hours of cyclic exposure to high temperature, water mist, humidity and intense UV. IPx5 Water Resistant Ingress protection rating test that consists of high pressure water spray and moisture Type-R Speakers Type-R speakers are engineered to deliver prodigious power while maintaining extreme sound clarity, for totally exciting sound. They provide high power handling, wide frequency response and a powerful bass kick. Type-R Superb Sound Quality Type-R Speakers employ many high quality parts and advanced designs, including a multilayer cone that is both light and strong, and a Linear Drive Magnet and Dual Gap Voice Coil structure that ensures maximum linearity for optimum sound quality. Features Crossover Network Crossover Type: Built-in Tweeter Protection Woofer Frame: High Temp ABS Frame Cone Material: Poly-Mica Woofer Cone Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill Tweeter Magnet Material: Neodymium Magnet Application Type / Design Detail: Internal / Fixed Tweeter Tweeter Type: Titanium/PEI Balanced Dome Tweeter General Sensitivity: 89dB / W(1m) Impedance: 4 Ω Frequency Response: 50Hz – 20khz Dimensions Woofer Mounting Depth: 2-27/32” Woofer Mounting Depth: 72.1mm Woofer Mounting Diameter: 5” Woofer Mounting Diameter: 127mm Woofer Diameter: 6-1/2” Woofer Diameter: 165.1mm Power Handling Power Handling Capacity (Peak): 100 Watts Power Handling Capacity (RMS): 30 Watts CEA-2031 Power Rating: 30 Watts

ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D2 Enhance your sound system’s performance with the remarkable S-Series S2-W12D2 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D2 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W12D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D2 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W12D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W12D2 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D2 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 2Ω Frequency Response: 23Hz – 215Hz Sensitivity (1W/1M): 85.7dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D4 Enhance your sound system’s performance with the remarkable S-Series S2-W10D4 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D4 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W10D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D4 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W10D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W10D4 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 4Ω Frequency Response: 25Hz – 215Hz Sensitivity (1W/1M): 84.9dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

ALPINE 6-1/2" 2-WAY WHITE COAXIAL MARINE SPEAKERS (WHITE)-SPS-M601W The new SPS-M601W White 6.5” Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8” Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5” poly woofers handle the mid-range frequencies. On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene® rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they’re tested against fog, salt and blazing sunlight so you can be sure they’ll sound great for many seasons to come. For added convenience, included is a marine grade connection loom for a more robust installation. Features Crossover Network Crossover Type: Built-in Tweeter Protection Woofer Frame: High Temp ABS Frame Cone Material: Poly-Mica Woofer Cone Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill Tweeter Magnet Material: Neodymium Magnet Application Type / Design Detail: Internal / Fixed Tweeter Tweeter Type: Titanium/PEI Balanced Dome Tweeter Specifications General Sensitivity: 89dB / W(1m) Impedance: 4 Ω Frequency Response: 50Hz – 20khz Dimensions Woofer Mounting Depth: 2-27/32” Woofer Mounting Depth: 72.1mm Woofer Mounting Diameter: 5” Woofer Mounting Diameter: 127mm Woofer Diameter: 6-1/2” Woofer Diameter: 165.1mm Power Handling Power Handling Capacity (Peak): 100 Watts Power Handling Capacity (RMS): 30 Watts CEA-2031 Power Rating: 30 Watts

Hertz DPK165.3 Dieci Series 6-1/2" 80W RMS 2-Way Component Speaker System  The DPK165.3 speakers from the Dieci Series have improved performance through the use of new components and technical solutions and are distinguished by premium sound quality in their price category. The packaging has an additional exclusive labeling GOLD SOUND - LIMITED EDITION. DPK165.3 is equipped with the new DPT26.4 tweeters with a 26 mm Soft Tetolon dome that features very natural and detailed high frequencies. Bass / midrange speakers DPV165.3 diffuser V-cone have a low enough resonant frequency Fs of 60 Hz which ensures dense and deep bass with a standard setup. The DPCX2.3 compact passive crossovers feature an asymmetric 6/12 dB / octave configuration that is optimal for ease of implementation and linearity in phase response. High-quality low-loss 100 V ADC metallized polypropylene capacitor is installed in the high-pass filter circuit, connection terminals are also gold-plated. Features: 6.5” Component System 160W Peak Power, 80W RMS 4 Ohm Impedance 93 DB Sensitivity Soft dome tweeters with powerful neodymium magnets deliver smooth, accurate and natural sound The woofers / midrange drivers are equipped with a V-cone cone made of lightweight, compressed cellulose that has excellent internal damping characteristics The compact passive crossovers have an asymmetric 6/12 dB / octave configuration that is optimal for ease of implementation and phase linearity. Specifications: Power handling: Peak: 160W  Continuous: 80W Impedance: 4 Ohm Frequency response: 45 – 23K Hz Sensitivity: 93 dB SPL Voice coil: 25mm Woofer size: 165 mm Tweeter size: 26mm Woofer magnet: High density flux ferrite Tweeter magnet: Neodymium Woofer cone: Water-repellent pressed paper Tweeter dome: Tetolon Crossover type: Hi-pass | Lo-pass Crossover cut off: Hi-pass @ 5kHz - 12dB / Oct | Lo-pass @ 5kHz - 6dB / Oct

Dieci 120W 6 Inch 2-Way Coaxial Speakers Large motor assembly Pure copper voice coil Water-repellent treated paper cone TPU surround Neodymium tweeter with PEI dome DIN-size basket protected by abrasion-proof dust paint Tin-plated, high current terminals Silver-plated lead wires Butyl rubber protective cover Epoxy glue for basket and motor system Low carbon content plates Adaptor ring included DISCLAIMER: Design, features and specifications subject to change without notice. Some features in videos on the Internet may not be available on all models, please contact us for the TECHNICAL SPECIFICATIONS for a complete list of features by model. This feature list is for reference only, please contact us to verify features and functionality.

Your entry to high-res audio Using technology developed for their flagship F#1 Status Series, Alpine built their Next-Generation R-Series Pro Series speakers to be accessible and fun for enthusiasts who are into high-resolution audio playback. Play your high-res music files with confidence, knowing that the ultra-wide frequency response of these speakers will provide the detailed, authentic sound you're looking for.  Minimal distortion Alpine optimizes their R2-S65 6-1/2" 2-way speakers for near-perfect sound from premium sources. The combination of a highly rigid aluminum frame and a lightweight glass-fiber reinforced woofer cone keeps the sound clean. The high-amplitude multi-roll surround maximizes impact while maintaining linearity, so you'll get punch to go with the clarity. And speaking of a little more punch, Alpine ups the mid-bass output with a ferrite magnet and larger motor structure. Loud and fun All the exquisite detail you need is handled by a 1" magnesium hard dome tweeter, which contributes to the "loud and fun" sound associated with Alpine's R-Series. These speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS. Hook ‘em up and play ‘em loud! Product highlights: 6-1/2" 2-way car speakers (pair) glass-fiber woofer cone with High-Amplitude Multi-Roll surround 1" magnesium hard dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz grilles included warranty: 1 year MFR # R2-S65 Item # 500R2S65 What's in the box: Two 2-way Speakers Two multi-purpose adapter rings (includes GM/Chrysler) Two grilles Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice On-line product registration information Template and specs on box Features & specs General Speaker Size 6 1/2 Driver Design 2-way Woofer Design Cone Woofer Material Glass-Fiber Woofer Surround Rubber Midrange Design --- Midrange Material --- Tweeter Design Dome Tweeter Material Magnesium Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 88 Sensitivity at 2.83 volts N/A Frequency Response 65 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 2 1/2 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 3/8 Mounting Height (Inches) 0.667 Frame Width 6.497 Frame Length 6.497

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its dual 8W3v3 subwoofer drivers, each in separate airspace, with an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure’s internal volume relative to its exterior volume. The port for each driver wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The two flared port entries/exits, one on each end of the enclosure, further enhance sound quality by minimizing air-flow noises through these ports. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. GENERAL SPECIFICATIONS: Finish: Black, high-grade automotive carpet with silver “JL AUDIO” embroidery on front baffle Steel mesh grilles are included to protect the subwoofer drivers Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 200 – 500W Nominal Impedance: 2 Ω Continuous Power Handling (RMS) 500 W Enclosure Type Slot-ported, Low-profile External Width (W) 35.5 in / 902 mm External Height (H) 11.0 in / 279 mm External Depth (D1) 5.125 in / 130 mm

C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing. The C7-650cw component woofer is capable of operating in a 3-way system, with a midrange and tweeter, or with only a tweeter in a 2-way configuration. Engineered from the ground up, it has exceptional linear excursion capability and outstanding linearity, resulting in solid mid-bass and pure, precise, mid-range performance. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviours. Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. Made in the USA with Global Components Sold individually, with a cast-alloy grille tray, one fine mesh steel grille insert and one spiral steel grille insert DESIGN FEATURES: Cone and Dust Cap: Vacuum-formed, mineral-filled polypropylene material offers excellent damping and low mass. The cone body features a gentle curvilinear profile to optimize response. A specially shaped dust cap attaches to the cone body and the voice coil former to improve high-frequency behaviour. Suspension design: The moving assembly is suspended and damped via a large-diameter, linear profile spider formed from a Nomex®/polycotton blend, and a positive-roll, rubber surround. The two combine to provide optimum damping without prematurely restricting the C7-650cw’s outstanding excursion capability. Motor Design: The C7-650cw employs a high-density magnetic circuit with a high-grade Y35 Strontium-ferrite magnet, and a specially machined, T-Yoke motor topology. Motor magnetics have been precisely optimized utilizing advanced FEA tools to reduce distortion and provide linear motor force throughout the driver’s performance range. A 32 mm (1.27 inch) diameter, the overhung voice coil is employed, wound with copper wire onto a fibreglass voice coil former. The oversized voice coil offers extended power handling capability, minimizing thermal compression and distortion at higher listening levels. Chassis Design: A purpose-engineered cast alloy basket is employed, featuring thin spokes to maximize rear open area and our patented Elevated Frame Cooling technology. DESIGN BANDWIDTH: With 48 dB/octave filters: 50 Hz – 5 kHz With 24 dB/octave filters: 60 Hz – 5 kHz With 12 dB/octave filters: 70 Hz – 5 kHz GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 125 W Peak Music Power: 225 W Recommended Amplifier Power (RMS): 50 - 175 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 50 Hz - 5 KHz ± 3 dB Voice Coil Resistance (Re): 3.114 Ω Free Air Resonance (Fs): 54.5 Hz Reference Efficiency (no): 0.304% Efficiency: 87.0 dB @ 1W / 1m | 93.0 dB @ 1W / 0.5m Sensitivity: 90.0 dB @ 2.83V / 1m Electrical “Q” (Qes): 0.669 Mechanical “Q” (Qms): 6.265 Total Speaker “Q” (Qts): 0.605 Equivalent Compliance (Vas): 0.461 cu. ft. (13.05 liters) Moving Mass (Mms): 17.679 g Mechanical Compliance (Cms): 0.000482 m/N Magnetic Strength (BL): 5.31 N/A Effective Piston Area (Sd): 21.4 sq. in. (0.013807 sq. m) One Way Linear Excursion (Xmax): 5 mm

6.5" (165 mm) Component Woofer (with Grille) Born from shared technologies used in our flagship C7 speakers, the C6-650cw component woofer benefits from vast woofer design experience and advanced modeling systems of JL Audio. Ideal for active systems, the C6-650cw component woofer features a proprietary cast alloy frame outfitted with our Elevated Frame Cooling™ technology and a DMA-optimized motor system to generate outstanding midbass impact with ultralow distortion. Passive crossover networks are not included with C6 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning digital signal processor, such as the JL Audio TwK® DSP, or a VXi amplifier with built-in DSP, with a dedicated amplifier channel for each C6 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. C6-650cw Component Woofer Features:• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels• Cast alloy frame with our Elevated Frame Cooling feature• Includes fine mesh grille Design Bandwidth:With 48 dB/octave filters: 55 Hz-6 kHzWith 24 dB/octave filters: 65 Hz-6 kHzWith 12 dB/octave filters: 80 Hz-6 kHz Component woofers are sold individually and include a plastic grille tray, one fine steel mesh grille and one electroformed JL Audio badge logo. General Specifications Continuous Power Handling (RMS) 100 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 87.37 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 55 Hz - 6 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.50 in / 165 mm Grille Tray Outer Diameter** (B) 6.76 in / 172 mm Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion*** (E) 1 in / 25 mm Mounting Hole Diameter (F) 5.46 in / 139 mm Mounting Depth (G) 2.60 in / 66 mm *Does not take into account mounting tabs**Does not take into account logo badge***Frontal grille protrusion measured from mounting surface

Manufactured in France Focal is known for innovative design and accurate sound, and they continue their impressive record of revolutionary hi-fi car audio with the K2 Power M Series. The Focal 6.5KM 6-1/2" component woofers are designed, engineered, and manufactured at Focal's facilities in France for true hi-fi sound in custom installations. This pair of Focal 6.5KM component woofers will handle the low-end detail and dynamics in your K2 Power M Series component system.     Powerful sound Focal engineers applied some of their most innovative technologies, including an M-profile Aramid fiber cone, to make these 6-1/2" woofers uniquely equipped for high-performance playback. The shape and material help reduce harmonic distortion so you'll enjoy Focal's signature clean, unstressed, K2 sound. Focal also prioritizes shallow depth to make this special speaker a better fit for more installation locations. And with power handling up to 120 watts RMS, you can safely drive this speaker with a healthy amount of power. Product highlights: 6-1/2" component woofers (pair) "M"-profile Aramid fiber woofer cone tuned mass damper surround crossovers not included super-rigid aluminum basket neodymium magnet 4-ohm impedance handles up to 120 watts RMS (240 watts peak power) frequency response: 50-5,000 Hz sensitivity at 2.83V: 92.5 dB top-mount depth: 2-1/8" grille not included warranty: 1 year MFR # 6.5KM Item # 09165KM What's in the box: Two 6.5 KM Woofers Focal Performance owner's manual Eight 1-1/8" Screws Eight speed clips Quick start guide Features & specs General Speaker Size 6 1/2 Design 1-way Tweeter Design --- Impedance (Ohms) 4 Tweeter Composition --- Woofer Composition Aramid Fiber Woofer Surround Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 93 Frequency Response 50 - 5k Hz Minimum RMS Wattage --- Maximum RMS Wattage 120 Peak Power Handling (Watts) 240 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 5/8 Mounting Height (Inches) 0.45 Frame Width 6.494 Frame Length 6.494

GENERAL SPECIFICATIONS Continuous Power Handling (RMS): 300 WSystem Nominal Impedance: 4 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: No PHYSICAL SPECIFICATIONSExternal Width (W) 16.31 in / 414 mmExternal Height (H) 15.18 in / 386 mmExternal Depth (D1) 20.3 in / 516 mmExternal Top Surface Depth (D2) 15.75 in / 400 mmNet Weight 33.1 lb / 15 kg

JIMNY RE-STYLE | EXTERIOR Metio Premium Audio For Jimny 2018 > 3Dr Jimny 150W Peak Power 50W RMS 4Ω 5cm Roof Speaker with Gunmetal Grille 16.5cm Door Woofers High Quality Crossover Network Mounting Accessories

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs. The C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair.

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer deigns. The C2-600 system features 6-inch (150 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6-inch (150 mm) format is a direct fit in many Japanese vehicles where a full-size 6.5-inch speaker (165 mm) will not fit without modification. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6-inch (150 mm) speaker. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-525 system features 5.25-inch (130 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. Many people mistakenly believe that an oval speaker cannot perform as well as around one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems. The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are not available for this product. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker. The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 50 Hz - 25 KHz ± 3 dB

The latest all-American pony car gets a big dose of horsepower and major technology enhancements, all packaged in a new sleek and sexy body. Sadly though, the stock audio systems just can’t deliver enough bass to keep up with the Mustang’s high-performance muscle. Our Stealthbox® features an all-fibreglass, sealed enclosure design that fits in the same location as the optional factory subwoofer (and requires no holes to be drilled for installation). Equipped with our revolutionary 12TW3 thin-line subwoofer, this Stealthbox delivers deep, powerful bass that’s worthy of your Mustang’s heritage. GENERAL SPECIFICATIONS: Contains one 12TW3-D4 in a sealed enclosure 400-watt power handling. Wired for 2-ohm mono Installs in the passenger side rear corner of the trunk Factory subwoofer (if equipped) must be removed for installation of Stealthbox® Installation in Mustang Shelby GT350 models requires relocation of additional OEM equipment Will not fit convertible models

Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable. Our patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment. GENERAL SPECIFICATIONS: Contains one 10TW3-D4 subwoofer in a sealed enclosure 400-watt power handling Wired for 2-ohm mono Installs in the passenger side of the trunk compartment Black steel mesh woofer grille is included

The smoothness and transparency of a high-end silk dome tweeter combine with top-flight component woofer performance to create a loudspeaker system with exceptional refinement and dynamic capability. The C5-650 component system features 6.5-inch (165 mm) component woofers with die-cast alloy baskets and Kurt Müller cones and suspensions. This woofer benefits from JL Audio’s vast woofer design experience and advanced modelling systems. The C5 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off-axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. The flush-mount fixtures feature our RSR (Ratcheting Swivel Rotation) mechanism to allow precise tweeter aiming after installation. C5 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 100 W Peak Music Power: 200 W Recommended Amplifier Power (RMS): 50 - 150 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 300 Hz - 10 KHz ± 3 dB Voice Coil Resistance (Re): 3.245 Ω Frame Outer Diameter (A): 3.45 in / 88 mm Bolt Hole Circle Diameter (B): 3.15 in / 80 mm Mounting Hole Diameter (C): 2.87 in / 73 mm Grille Tray Outer Diameter (D): 3.95 in / 100 mm Frontal Grille Protrusion (E): 0.58 in / 15 mm Mounting Depth (F): 1.46 in / 37 mm Motor Outer Diameter (G): 2.36 in / 60 mm

C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing. The C7-100ct component tweeter is designed to deliver unparalleled high-frequency performance. Utilizing a corundum ceramic-coated aluminium alloy diaphragm suspended via treated silk, s-roll surround, it provides spectacularly detailed reproduction of treble frequencies with an outstanding off-axis response. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviours. Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. Sold individually, with flush and surface mounting fixtures and hardware. One 15μF tweeter protection capacitor is also included. DESIGN FEATURES: Dome Diaphragm: Corundum ceramic-coated aluminium alloy diaphragm exhibits high stiffness, very low mass and excellent environmental stability. It also helps the tweeter dome to hold its shape and operate as a true piston at higher frequencies, without a penalty in moving mass. Suspension Design: The diaphragm’s motion is centred, sprung and damped by treated silk, s-roll surround. Ferrofluid in the magnetic gap acts as a rear suspension element in this design. The two combine to provide optimum damping without unduly restricting excursion. Motor Design: The C7-100ct employs a high-density magnetic circuit with a neodymium magnet and U-Yoke motor topology. An under-hung voice coil is employed, wound with copper-clad aluminium wire onto an aluminium voice coil former. Motor magnetics have been precisely optimized utilizing advanced FEA tools to lower even-order distortion and IMD/AMD. Acoustical Design: The shape of the tweeter housing is designed to boost sensitivity in a very specific bandwidth, helping to flatten the frequency response. It also provides improved control of directivity. DESIGN BANDWIDTH: With 48 dB/octave filters: 3,000 Hz – 30,000 Hz With 24 dB/octave filters: 4,000 Hz – 30,000 Hz With 12 dB/octave filters: 5,000 Hz – 30,000 Hz GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 100 W Peak Music Power: 200 W Recommended Amplifier Power (RMS): 50 - 150 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 3 kHz - 30 KHz ± 3 dB Voice Coil Resistance (Re): 3.20 Ω Free Air Resonance (Fs): 1450 Hz Reference Efficiency (no): 0.267% Efficiency: 86.5 dB @ 1W / 1m | 92.5 dB @ 1W / 0.5m Sensitivity: 89.5 dB @ 2.83V / 1m Flush Mount Fixture Diameter (A1): 2.13 in / 54 mm Surface Mount Fixture Diameter (A2): 2.16 in / 55 mm Flush Mount Mounting Hole Diameter (B): 1.88 in / 48 mm Flush Mount Mounting Depth (C): 0.73 in / 19 mm Flush Mount Tweeter Frontal Protrusion (D1): 0.33 in / 8 mm Surface Mount Tweeter Frontal Protrusion (D2): 1.06 in / 27 mm

Steel mesh grille insert for select JL Audio 8-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring.

Steel mesh grille inserts for select JL Audio 10-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's rubber gasket ring.

JL AUDIO MICROSUB CP110LG-TW1-2 300 WATT RMS SINGLE 10" 10TW1-2 SUBWOOFER Product Highlights • Preloaded with single 10TW1-2 Subwoofer• Nominal Impedance: 2-ohms• Black, high-grade automotive carpet with silver embroidery• Efficient slot-ported design and precise tuning of its 10TW1 subwoofer• Sensitivity: 82.2 dB 1 watt / 1 meter General Features: Single 10" Vented Subwoofer Enclosure Preloaded with single 10TW1-2 Subwoofer RMS Power Rating: RMS: 300 watts Recommended power range: 75 - 300 watts RMS Nominal Impedance: 2 Ω Extensive interior bracing Steel mesh grille included Black, high-grade automotive carpet with silver embroidery Flared port entry and exit for enhanced sound quality Five-way binding post terminals for easy installation Precision-built in USA at JL Audio’s Miramar, Florida factory Long linear excursion capability (0.40 in / 10 mm, one-way) Efficient slot-ported design and precise tuning of its 10TW1 subwoofer Matching JL Audio Amplifier: JL Audio JX250/1 JL Audio XD300/1v2 - ✔ Preferred Match Authorized Internet Dealer 2 Year Manufacturer's Warranty General Specifications: Injection molded, mica-filled polypropylene cone Rubber surround No pole vent: permits mounting close to rear wall of enclosure DMA-optimized motor design Patented concentric tube architecture Patented floating cone attach method technology Cast alloy frame with flat edges for tight driver grouping Construction: CNC-Cut High-Grade MDF One-Way Linear Excursion (Xmax): 0.40 in / 10.0 mm Sensitivity: 82.2 dB 1 watt / 1 meter Enclosure Dimensions: 6.375" D x 20.875" W x 13.250" H Warranty and Return Policy Parts Warranty Duration 2 years Labor Warranty Duration 2 years Warranty Provider Manufacturer Item Details Manufacturer: JL AUDIO Model Number: CP110LG-TW1-2 Weight: 25.25lbs Internal SKU: cp110lgtw12

JL AUDIO CS113TG-TW5V2SINGLE 13TW5V2 TRUCK POWERWEDGE, SEALED, 2 Product highlights • 13.5" Loaded PowerWedge Truck Enclosure• 1200W Peak• 600W RMS• Comes Equipped with One JL Audio 13TW5-3v2 TW5 Thin-Line Subwoofer• High Grade Black Carpet Finish• Five-Way Binding Post Connectors Product Features:         13-1/2" TW5 (Thin-Line) Series Shallow Mount Subwoofer Power Handling: RMS: 600 watts Recommended Power Range: 250 - 600 watts Impedance: 2-Ohm Mica-filled polypropylene cone Santoprene surround Cast alloy basket 7-inch diameter voice coil Unique design allows for small airspace requirements Requires only 0.8 cubic feet of airspace 13% greater linear excursion capability over previous model Redesigned motor features an annular vent DMA-optimized motor designs   Patented floating cone attach method" technology Patented concentric tube architecture "Tab-Ear" frame design to fit driver in tight spaces Precision-built in USA at JL Audios Miramar, Florida factory Sensitivity: 85.63 dB Xmax: 11 mm Reference Efficiency (no): 0.2300% Frequency response: ~20 ~ 200 Hz Matching Amplifiers: JL Audio XD600/1v2 JL Audio 600/1v3 Authorized Internet Dealer 2 Year Manufacturer's Warranty General Enclosure Features: PowerWedge Sealed Truck Enclosure V-Groove MDF Construction advanced cabinet-building technique uses CNC machining to create precise panel joints Delivers world-class sub-bass fidelity Provides a detailed and smooth response High grade black carpet finish Five-Way binding post connectors Embroidered JL Audio logo JL Audio ECS internal wiring Steel mesh grille provides excellent woofer protection Designed to fit perfectly behind the seats of trucks Final Impedance: 2 ohm Weight: 34 lbs Dimensions: 4-1/2"TD x 7-1/4"BD x 21-1/4"W x 15-3/4"H Warranty and Return Policy Parts Warranty Duration 2 years Labor Warranty Duration 2 years Warranty Provider Manufacturer

JL AUDIO SB-TE-YG1/10TW1 TESLA MODEL Y STEALTHB OVERVIEW Tesla’s popular compact crossover delivers quick acceleration and a roomy cabin with plenty of space for both people and cargo. Sadly though, the factory audio options offer very little to satisfy in the bass reproduction departmen 10TW-1 SUBWOOFERS Featuring an all-fiberglass, custom-formed, sealed enclosure, this Stealthbox® houses an innovative. 10-inch TW1 thin-line subwoofer. Designed to drop into the driver’s side, rear storage compartment, this Stealthbox® solution produces amazing amounts of deep bass output, while practically vanishing into its surroundings. BUILT IN USA At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, our production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined with our commitment to state-of-the-art assembly technology, allows our skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A. INSTALL NOTES Use of driver's side, rear storage compartment is lost with installation. SPECIFICATIONS 2020-UP TESLA MODEL Y (5-SEAT) SUBWOOFERS 10TW1-2 POWER 300W RMS NOMINAL IMPEDANCE 2Ω MONO FEATURES BRAND JL AUDIO RMS POWER 300W RMS SHALLOW MOUNT YES SUBWOOFER SIZE 10"  

JL AUDIO CS110LG-TW3 SINGLE 10TW3 POWERWEDGE, SEALED, 2 Ω Product highlights • Peak Power Handling: 800W • RMS Power Handling: 400W • Dual 4 Ohm Voice Coils • Sealed Enclosure w/ Black Carpet Finish • 5/8" MDF Construction Subwoofer Features: 10" 2 ohm TW3 subwoofer driver Power Handling: Peak: 800 watts RMS: 400 watts Impedance: 2 ohms Mica-filled injection molded polypropylene cone Rubber woofer surround Dual 4 ohm voice coils Frequency response: 22-200 Hz Sensitivity: 82dB Comes with black steel mesh grille 2 Year Manufacturer's Warranty General Enclosure Features: Subwoofer mounting depth: 3-1/2" Subwoofer cutout diameter: 11-5/8" 5/8" MDF construction Sealed enclosure Black carpet covered cabinet One pair of 5-way binding posts on the left side of the enclosure Nickel plated push terminals Dimensions: 5-1/8"D x 6-5/8"D w/ grille x 21"W x 15-3/8"H

The compact PSB200 measures less than 51/8" deep (13cm deep, with the grille) and therefore slides easily into a car boot. And its size isn’t the only great feature: it is also easy to use and delivers quality sound performance thanks to its 8" subwoofer that has 250 watts of power. Delivered with brackets, screws and a set of hook-and-loop fastener, PSB200 can be fixed in various locations in your vehicle and it perfectly completes a 2 or 3-way audio system while remaining discreet and delivering precise and dynamic bass. With this passive enclosure, discover the pleasure of all sound nuances during your drive. Features: Easy to install 250W Max Compact Protection grille included MDF structure, rigid enclosure Includes screws, brackets and adhesive strip Specifications: Type: Sealed enclosure Subwoofer: 8" (200mm) Dimensions: (HxDxW) 12" x 4.9" x 19" (303.6 x 124.8 x 489mm) Weight: 15lbs (7kg) Impedance: 4Ω Max. power: 250W Nom. power: 150W Sensitivity (2.83 V/1 m): 83dB Frequency response: 45Hz - 150Hz Accessories: Screws, brackets and adhesive strip

ISBMW100L, ICBMW100L, ISUBBMW2 (qty2), Impulse 4.320, harness IW-BMW-IMP2.1, harness IW-PWSUP600

ISVW180, ISVW165, Impulse 4.320, iSUB TWIN and harnesses IW-VWYISO, IW-IMP2.2

Volkswagen, Skoda compatible 2021 series VW 6.5” coaxial speaker kit, 60W RMS, 60Hz - 20kHz

Volkswagen, Skoda compatible 2021 series VW 6.5” component speaker kit 60W RMS, 60Hz - 20kHz

Volkswagen, Skoda compatible 7.1” dedicated component kit, 75W RMS, 50Hz-20kHZ

Equipped with the Flax cone, the woofers from the PS 165 FSE kit deliver a very dynamic, natural sound without colouration. The TMD (Tuned Mass Damper) surround they incorporate stabilises the surround to achieve better control, and even greater neutrality and linearity. Thanks to their built-in neodymium motor, their depth is reduced (slim, shallow basket profile): this more compact design makes them even easier to install in factory locations. The ‚ÄòM‚Äô-profile inverted dome TAM tweeters included in the kit offer a wider diffusion angle and greater sound definition, without directionality. Thanks to their tilted mounting, they are easy to install in the vehicle. A compact, pre-cabled audiophile crossover completes this kit. Finally, with its engraved aluminium basket and meticulous finishes, PS 165 FSE combines style, discretion and modernity for a premium system. PS165FSE Features Unique, patented Flax cone Butyl surround with exclusive ‘TMD‚Äô profile Al/Mg ‚ÄòM‚Äô-profile inverted dome TAM tweeter Made in France in the Focal workshops High sensitivity Wider diffusion angle Natural, precise sound Easy installation