4WD Parts Deals and Special Offers

Lightforce BEAST LED Driving Lights - 3 Mode High Output Kit - BEAST230PK See further. Drive safer. Take control of the night. The Lightforce BEAST 3-Mode LED Driving Lights are engineered for serious 4WD drivers who demand maximum visibility and reliability. With the ability to switch between Spot, Flood, and BEAST modes instantly, you get the right beam pattern for any terrain or condition. Up to 1497m beam distance. Built for Australian conditions. Designed to perform where others fail. Key Benefits 3 beam modes in one – Spot, Flood & BEAST Long-distance visibility up to 1497m Wide beam spread for improved peripheral vision IP69K rated for extreme dust and water protection Built tough for off-road, touring, and heavy-duty use 3 Modes. Total Visibility Control. Spot Beam: Focused long-distance visibility (up to 1497m) Flood Beam: Wide 140m spread for side visibility BEAST Mode: Combines distance and width for maximum coverage Built for Extreme Conditions IP69K rated – dustproof, waterproof, and pressure wash safe Operates from -40°C to 70°C (up to 125°C heat spikes) IK16 impact resistance for harsh environments Tested to military vibration and shock standards Resistant to fuel, chemicals, UV, and salt exposure Premium Construction Hard-coated lens for superior impact resistance Durable aluminium housing for long-term performance Gore® waterproof membrane to prevent moisture ingress Premium coatings for corrosion and UV resistance Slimline, lightweight design for flexible mounting What’s in the Box 2 x Lightforce BEAST LED Driving Lights 2 x Clear Filters 2 x Reversible Mounting Brackets 2 x 4-Pin Waterproof Adaptors User Instructions Specifications LED Count: 36 Beam Type: 3 Mode Distance: 1 Lux @ 1497m Effective Lumens: 10,275 / 7,826 / 13,269 lm Colour Temperature: 5700K Voltage: 13.2V Wattage: 149W Diameter: 230mm Weight: 2.2kg each Ingress Rating: IP69K Warranty: 5 Years SKU: BEAST230PK Why Choose Lightforce BEAST Australian designed, engineered, and manufactured One of the most rigorously tested driving lights available Trusted for off-road and touring applications Built for reliability in extreme environments Drive Further. See More. Upgrade your setup with lighting built for serious performance. The Lightforce beast spotlight delivers the visibility, durability, and control you need for any journey. Frequently Asked Questions   What's the difference between Spot, Flood and BEAST mode? The BEAST 230 features three selectable beam patterns: Spot Mode – Focused long-range beam with visibility up to 1497 metres. Flood Mode – Wide 140-metre spread for improved side visibility and peripheral awareness. BEAST Mode – Combines both distance and width for maximum overall coverage and visibility. Can I fit the BEAST230PK myself or do I need an auto electrician? The kit includes mounting brackets, waterproof adaptors, filters, and instructions. Experienced DIY installers may be able to complete the installation; however, professional installation by a qualified auto electrician is recommended to ensure correct wiring and optimal performance. Are these LED driving lights road legal in Australia? When installed and used in accordance with Australian road rules and applicable state regulations, the Lightforce BEAST driving lights can be used legally on Australian roads. Always check local regulations regarding auxiliary driving light installation and operation.  

A double discounted combo that includes the Protection Pouch and Grilling Griddle. Two essential nomadiQ accessories in one DEAL. Go beyond the basics and check out with this Double discounted combo package. Includes the Protection Pouch & the greatest Grilling Griddle. The nomadiQ Protection Pouch is made of neoprene, making it strong and durable, while also soft and lightweight. This sleeve is made to protect your nomadiQ BBQ and covers it while folded. Provided with convenient straps so you can store the two drip trays and the hose assembly. A mandatory upgrade for your BBQ is our lightweight Grilling Griddle. You can fry eggs, pancakes, vegetables, seafood and many other healthy dishes on-the-go. Constructed from steel and an enamel coating.   Weight 1.5 kg Dimensions 38 × 28 × 3 cm Material Enameled steel Brand nomadiQ   Mix and Match Your Perfect BBQ Set-Up To keep your BBQ protected, explore our nomadiQ Protection Pouch in exclusive limited edition colors: Charcoal Black Flaming Red Forest Green For added versatility, our nomadiQ Grill Plates offer a range of options, perfect for any cooking style: Closed Grill Plate Dutch Pancake Grill Plate Pancake Grill Plate Create the ultimate nomadiQ BBQ set by mixing and matching these colors and accessories to suit your style and needs. Want to customize your color combination? Send us an email, and we'll be happy to help!   

Check out with this discount with our best selling combo package. A Triple discounted combo that includes the nomadiQ BBQ, Grilling Griddle and the Protection Pouch. Go beyond the basics and check out with this Triple discounted combo package. Includes The nomadiQ BBQ, our famous Protection Pouch & the greatest Grilling Griddle. The nomadiQ Protection Pouch is made of neoprene, making it strong and durable, while also soft and lightweight. This sleeve is made to protect your nomadiQ BBQ and covers it while folded. Provided with convenient straps so you can store the two drip trays and the hose assembly. A mandatory upgrade for your BBQ is our lightweight Grilling Griddle. You can fry eggs, pancakes, vegetables, seafood and many other healthy dishes on-the-go. Constructed from steel and an enamel coating.   Weight 1.5 kg Dimensions 38 × 28 × 3 cm Material Enameled steel Brand nomadiQ   Mix and Match Your Perfect BBQ Set-Up The nomadiQ BBQ is available in a variety of stylish colors, allowing you to personalize your outdoor cooking experience. Choose from: Charcoal Black Petrol Pretty Pink Terra Urban Gray To keep your BBQ protected, explore our nomadiQ Protection Pouch in exclusive limited edition colors: Charcoal Black Flaming Red Forest Green For added versatility, our nomadiQ Grill Plates offer a range of options, perfect for any cooking style: Closed Grill Plate Dutch Pancake Grill Plate Pancake Grill Plate Create the ultimate nomadiQ BBQ set by mixing and matching these colors and accessories to suit your style and needs. Want to customize your color combination? Send us an email, and we'll be happy to help!   

Alpine R2-Series Premium Speaker System – FORD RANGER PXII / PXIII (Front & Rear) Upgrade your Ford Ranger with powerful, high-resolution sound. The Alpine R2-Series Premium Speaker System is a direct-fit upgrade designed to deliver deep bass, crystal-clear highs, and true Hi-Fi performance — all without modifying your vehicle. Built specifically for the FORD RANGER PXII and PXIII, this complete front and rear speaker system transforms your in-car audio with premium materials, advanced engineering, and seamless integration. Key Benefits Direct-fit upgrade for FORD RANGER PXII / PXIII Complete front and rear speaker system Plug-and-play installation — no cutting or soldering required High-resolution audio with extended frequency response up to 40kHz Enhanced bass performance with larger magnet structure Premium tweeter housing for improved sound staging and interior aesthetics Vehicle Fitment FORD | RANGER | PXII / PXIII Direct Fit Integration Designed specifically for the Ford Ranger, this system integrates seamlessly with factory mounting points and wiring. All components are pre-assembled with plug-and-play connections, allowing for a straightforward installation with no modifications required. Premium Tweeter System 1” magnesium hard-dome tweeters for ultra-clear sound Hi-Res Audio certified with response up to 40kHz Swivel design to optimise sound direction and staging Custom A-pillar housing with premium Alpine finish Powerful Woofer Performance Glass-fibre reinforced cone for fast, accurate response Larger magnet structure for deeper, stronger bass HAMR surround for increased cone movement and output Shallow mounting design for easy installation Advanced Audio Engineering Dual gap voice coil for improved clarity and linearity High-quality in-line crossover network included Adjustable tweeter levels (-3dB / 0dB / +3dB) Bi-amp ready design for advanced setups Specifications Peak Power: 300W RMS Power: 100W Impedance: 4 Ohms Frequency Response: 65Hz – 40kHz Woofer Size: 16.5 cm (6.5") Mounting Depth: 5.9 cm Magnet: Neodymium Why Choose Alpine R2-Series Engineered specifically for vehicle-specific fitment Premium materials for superior sound quality Designed for both performance and aesthetics Trusted Alpine audio engineering FAQs Is this a direct fit for my Ranger?Yes, it is designed specifically for FORD RANGER PXII and PXIII models. Do I need to modify wiring?No, it features plug-and-play connections with no cutting or soldering required. Does this include both front and rear speakers?Yes, this is a complete front and rear speaker upgrade system. Will this improve bass performance?Yes, the upgraded magnet structure and HAMR surround provide significantly improved bass output. Upgrade Your Ranger’s Sound System Experience premium audio performance with a system designed specifically for your vehicle. The Alpine R2-Series delivers clarity, power, and precision in every drive.

Alpine’s all-new i905-LC70 has been engineered with cutting-edge design to elevate the in-cabin aesthetic. The high definition WXGA 9” display acts as a stunning new centrepiece to the interior, integrating seamlessly whilst also showcasing design cues in-line with the 70 Series rugged history. Discover an industry-leading innovation masterpiece, delivering unmatched quality and value for the ultimate 21st century off-road lifestyle. Equipped with wireless Apple CarPlay and Android Auto (USB), an endless array of entertainment and smartphone apps are available to use in your dashboard. Get directions with maps and navigation apps, send and receive messages, make calls and listen to music all without a cable in sight. Not only this – with TIDAL now built-in, soak in your favourite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio like you’ve never heard it before. For those with a large existing library of Hi-Res audio content that is also supported up to 96kHz 24bit. With a world-first innovation, the i905-LC70 equipped with a powerful built-in Class-D amplifier to deliver the richness and dynamics of your music for the most superior sound performance. Moreover, with Alpine’s extensive sound tuning built-in you can apply simple one touch audio adjustments to make your cabin space sound brilliant, or for pro-level users and enthusiasts a host of advanced tuning functions are available. The i905-LC70 is the new benchmark for all 70 Series enthusiasts – elevating the interior aesthetic in every way possible, whilst delivering an incredible connectivity and multimedia experience with impeccable audio performance.

Toyota Hilux/Fortuner, 2015-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM750 Suits Toyota Hilux/Fortuner, 2015-Current Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Toyota Hilux/Fortuner, 2015-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM750 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Isuzu Dmax Sept 2020-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM950 Suits Isuzu Dmax Sept 2020-Current Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Bsm Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Isuzu Dmax Sept 2020-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM950 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Nissan Y62 Patrol-2013-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM250 Suits Nissan Y62 Patrol-2013-Current Colour Black Type Power Fold Key Features Heated – Heated mirror glass to demist in cold or wet conditions Electric – Electric mirror adjustment from inside the cabin Indicator – Integrated indicators for improved road visibility Puddle Light – Puddle lights illuminate the ground when entering or exiting Camera Memory – Memory function recalls your preferred mirror position Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Nissan Y62 Patrol-2013-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM250 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

ALPINE 79 SERIES DUALCAB - R2 SERIES DOOR POD KIT ( FRONT AND REAR ) -LC70-R269P Turn up the bass in your 70 Series—the next Generation R-Series are born to be played loud with the all-new R-Series ‘direct fit’ premium aftermarket speaker upgrade. Alpine’s premium sound solution has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge R2-Series 6×9” speakers front and rear, experience punchy, concise bass as well as uncompromised sound performance and richness possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. Up front, the LC70-R269P houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to house maps, tablets, or books. To the rear, drinks up to 600ml can also be carried. For technological needs, there are USB charge ports both front and rear allowing charge of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-R269P elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-R269P is the pinnacle of Hi-Fi sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Dual Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch R2-Series speakers both front and rear not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-R269P combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 4x USB Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design Specifications General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 60Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 160mm x 240mm Woofer Diameter (in): 6″ x 9″ Woofer Mounting Diameter (mm): 167mm Woofer Mounting Diameter (in): 6-19/32″ Woofer Mounting Depth (mm): 75mm Woofer Mounting Depth (in): 3″

Ford Ranger, 2012 - May 2022 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM602 Suits Ford Ranger, 2012 - May 2022 Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Ford Ranger, 2012 - May 2022 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM602 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Lc200 Landcruiser - 08/2015 - 07/2021 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM354 Suits Lc200 Landcruiser - 08/2015 - 07/2021 Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Bsm Heated – Heated mirror glass to demist in cold or wet conditions Camera Powerfold – Power-fold function, mirrors fold in and out with the vehicle Memory – Memory function recalls your preferred mirror position Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Lc200 Landcruiser - 08/2015 - 07/2021 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM354 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

All-in-One Solution Enhance your factory or aftermarket radio and sound system with the Alpine OPTIM™8. Featuring a built-in 8-channel amplifier with Hi-Res Audio playback up to 96kHz/24Bit, the OPTIM™8 is the all-in-one sound solution to amplify and effortlessly sound-tune your system in minutes. Automatic Sound Tuning Tune your entire sound system in under five minutes with the innovative auto-tuning capabilities of the Alpine OPTIM™8. Using the PC App and a mic kit (sold separately) or the OPTIM8 IOS App and built-in microphone on an iPhone® 10 or newer, measure, correct, and tune your system to your desired listening preference through fast and easy guided tuning instructions. Guided Self-Tuning The Alpine OPTIM8 removes all the complexities of tuning a sound system by providing a simple, self-guided process via the OPTIM8 iPhone app or PC app to quickly and precisely measure your vehicle's interior. This innovative Auto-EQ software analyses your vehicle's acoustic environment and intelligently adjusts to optimise the audio output for your vehicle. Flexible Application The OPTIM8 gives you the flexibility to use your factory radio and sound system or tie in an aftermarket radio and sound system. The built-in amplifier boasts 50W x 6 @ 4-ohm + 150W x 2 @ 4-ohm, or 50W x 6 @ 2-ohm + 300W x 2 @ 2-ohm, for a solution that's able to power a full sound system. Digital inputs include Coax and USB (DAC) while a high-level speaker input of up to 30V allows the OPTIM8 to connect to a factory amplifier. You can also stream music directly to your head unit using Bluetooth streaming capabilities. Customised Listening Experience The Alpine OPTIM8 removes all the complexities of tuning a sound system by providing a simple, self-guided process via the OPTIM8 iPhone app or PC app to quickly and precisely measure your vehicle's interior. This innovative Auto-EQ software analyses your vehicle's acoustic environment and intelligently adjusts to optimise the audio output for your vehicle.

This low-profile flat deck Slimsport Tray has a load-carrying area of 2280mm (89.8") x 1289mm (50.7"). The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength. High-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for all Front Runner side mount accessories (sold separately). The included standard full fairing with rubber edge trim, makes the rack ultra-quiet. Need a lightbar? The optional Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow use of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (both sold separately). Fitment guide and all mounting hardware included. Note: Under Rack Tables are not compatible with the Slimsport rack kit range Fits to existing factory holes with factory rails removed. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSTL002T - Toyota Land Cruiser 100 Slimsport Roof Rack Kit Consisting of: 1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray 1x RRAC281 - Toyota Lnd Crusr 100 series Slmsprt Wind Fairing 1x RRAC971 - Protection Strip Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 37.43kg (82.52lbs) Assembled Rack Kit Dimensions: 2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 40kg (88lbs)

Get your Isuzu D-Max ready for all adventure types and gear-carrying assignments with this low-profile Slimsport Roof Rack Kit/Lightbar Ready. Now, you can mount various accessories onto the rack's super-strong slats via the T-slots. This low-profile flat deck Slimsport rack has a load carrying area of 1410mm (55.5") x 1141mm (44.9"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - by Front Runner for most Front Runner side mount accessories (sold separately). Included in the Isuzu D-Max (2020-Current) Slimsport Rack is the Isuzu D-Max (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Note: Drilling required for installation. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range. Note: Only compatible with rear factory antenna or when no front antenna is fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* Features KSID002T - Isuzu D-Max (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready Consisting of: 1x KSID001 - Isuzu Dmax (2020-Current) Slimsport Tray 1x RRAC309 - Isuzu D-Max (20-current) Lightbar Windfairing Material Used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 18.75kg (41.34lbs) Assembled Rack Kit Dimensions: 1410mm (55.5") L x 1140mm (44.9") W x 125mm (4.9") H   The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicle's roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof. Shipping Dimensions: Width: 325mm (13") Length: 1700mm (67") Height: 220mm (9") Shipping Weight: Weight: 24kg (53lbs)

Unlock your van’s storage potential with this highly versatile, rugged roof rack kit for Mercedes-Benz Sprinter vans. Long distance van-life mission, weekend trip or hauling equipment such as ladders and pipes, the low profile rack is designed to support large loads. It features an adjustable slat system to accommodate just about any type of roof-mounted equipment such as air conditioning units, skylights and air vents. The rack's expansive load-carrying area was designed to carry gear and mount Front Runner accessories in a huge range of configurations. Compatible with Mercedes-Benz Sprinter L2H1 144" MWB standard roof vans with a vehicle length of 5923mm / 233.2". Load-carrying area: 3176mm (125") L x 1528mm (60.2"). Twelve (12) Mounting Feet secure into van's existing factory mounting points. Included Slat Bracket can be inverted for a lower profile at 85mm (3.4") height, or left in standard configuration at 127mm (5"). Compatible with most Front Runner accessories. Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories. Fitment guide and all mounting hardware are included. No drilling or modification required. All Front Runner racks are backed by a limited lifetime warranty.* WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov Consisting of:6x FAVF004 - Mercedes Sprinter Van Rack Foot Set1x RRAC207 - Van Rack Joiner Kit2x RRAC208 - Van Rack Side Profile End Caps3x RRAC940 - Merc Bens Sprinter Slimpro Van Track T-Bolt Kit4x RRNS1425 - Narrow Slat / 1425mm (Pair)2x SPVT003 - Van Rack Side Profile / 1560mm1x WDST013 - Wind Deflector Van Rack 30mm LipMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 32.72kg (72.14lbs)Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 160mm (6")Shipping Weight:Weight: 38kg (84lbs)

The Polyair Dominator Bellow is a very unique kit designed specifically for the Toyota Landcruiser 70 Series (All series & body types) First released in 1984 and still in production today, the 70 Series Landcuiser is arguably the toughest 4x4 in production. Due to the massive amounts of upgrades & add-ons available, a tough load assist solution is needed. The Dominator kit uses a unique 4 ply, fabric reinforced rubber with rolled metal end plate, giving it superior load levelling capabilities and improved control! The Dominator is the strongest, tallest and thickest airbag in the Polyair Range. Kits are available for standard height up to 3” raised suspension When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down, this drop can have some adverse effects on your vehicle’s safety and handling. Symptoms such as: - Suspension bottoming out - Rough ride - Excessive sway & body roll - Unpredictable braking characteristics - Poor headlight aim All this can be mitigated by simply installing a set of Dominator Bellows! The Dominator kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights. Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up. Having the flexibility of the adjustable Polyair Dominator’s means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple. Features: - Air adjustable from 5-100psi - Built with a superior 4-ply fabric reinforced rubber - Ultra high strength rolled steel end caps - No drilling or chassis modifications required! - Easy to install with illustrated instructions - Quick connecting, easy to use air fittings - Kits designed for standard height and raised applications 2 year, unlimited km warranty. Position: Rear Toyota - Landcruiser 70 Series

Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″

Mitsubishi Triton 2015-02/2024 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1152 Suits Mitsubishi Triton 2015-02/2024 Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Bsm Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Mitsubishi Triton 2015-02/2024 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1152 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Ram 1500, 2018-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1504 Suits Ram 1500, 2018-Current Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Temp Sensor – Outside temperature sensor built into the mirror housing Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Ram 1500, 2018-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1504 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

300 Series Gx 07/21-01/2025 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2251 Suits 300 Series Gx 07/21-01/2025 Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: 300 Series Gx 07/21-01/2025 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM2251 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Isuzu Dmax Sept 2020-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM902 Suits Isuzu Dmax Sept 2020-Current Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Blind Spot Monitoring – Blind Spot Monitoring to alert you to vehicles beside you Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Isuzu Dmax Sept 2020-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM902 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Amarok- 2009-03/2023 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM102 Suits Amarok- 2009-03/2023 Colour Chrome Type Non Power Fold Key Features Heated – Heated mirror glass to demist in cold or wet conditions Radio Electric – Electric mirror adjustment from inside the cabin Gps No Indicators Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Amarok- 2009-03/2023 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM102 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Amarok- 2009-03/2023 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM100 Suits Amarok- 2009-03/2023 Colour Black Type Non Power Fold Key Features Heated – Heated mirror glass to demist in cold or wet conditions Radio Electric – Electric mirror adjustment from inside the cabin No Indicators Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Amarok- 2009-03/2023 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM100 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Nissan Y62 Patrol 2013-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM252 Suits Nissan Y62 Patrol 2013-Current Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Heated – Heated mirror glass to demist in cold or wet conditions Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Nissan Y62 Patrol 2013-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM252 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Py Ford Ranger/Ub Ford Everest 06/22-Curr Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2652 Suits Py Ford Ranger/Ub Ford Everest 06/22-Curr Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicator – Integrated indicators for improved road visibility Heat – Heated mirror glass to demist in cold or wet conditions Bsm Temp Sesnor Powerfold – Power-fold function, mirrors fold in and out with the vehicle Camera Puddle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Py Ford Ranger/Ub Ford Everest 06/22-Curr Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM2652 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Discover the thrill of driving in your D-MAX with Alpine's premium 11'' multimedia infotainment system, the iLX-F511A. This stunning upgrade offers an endless array of entertainment features while combining functionality with interior aesthetics. Prepare to be captivated by the ultra-high-quality WXGA centrepiece display, complete with Hi-Res Audio specifications and advanced wireless connectivity. The iLX-F511A promises the ultimate visual entertainment experience with its WXGA 11'' high-resolution display. Boasting 2.7 million pixel elements, it delivers stunning contrast and clarity, providing the deepest blacks, richest colors, and lifelike picture quality from both USB and HDMI sources. Equipped with Apple CarPlay and Android Auto, the iLX-F511A brings a wide range of smartphone features and entertainment directly to your dashboard. Easily get directions, make calls, send and receive messages, and enjoy high-resolution streaming music, all controlled through the display or voice commands. Indulge in superb audio fidelity with Hi-Res Audio and LDAC wireless technology. Play high-resolution audio tracks via USB or stream music services from your smartphone, experiencing crystal-clear and authentic sound reproduction, as intended by the artist. The iLX-F511A boasts the world's first built-in Class-D amplifier, redefining head unit power and delivering rich acoustic performances across various music styles and live performances through any loudspeaker. Experience the new benchmark for audiophiles with the iLX-F511A, offering incredible audio performance, a magnificent centrepiece design, and cutting-edge technology. Seamlessly integrate with your D-MAX's factory steering wheel audio controls using Alpine's built-in Bluetooth connectivity. Additionally, the iLX-F511A effortlessly integrates with the D-MAX rear-view camera, automatically engaging when reversing, ensuring a safe and focused driving experience. The high-definition laminated display of the iLX-F511A is a sight to behold, with intensely vibrant and realistic colors, ultra-smooth video motion, and razor-sharp image detail. The laminated display technology ensures unparalleled brightness and contrast, regardless of lighting conditions or viewing angles. Enjoy a wireless Apple CarPlay and Android Auto experience, eliminating the need for wires and enhancing convenience. Your iPhone connects wirelessly to the iLX-F511A, granting access to your favorite apps and services without any physical connections. The iLX-F511A also supports a wide range of audio streaming apps, including Spotify, Apple Music, YouTube Music, and more, providing limitless entertainment options for music enthusiasts. Immerse yourself in a true high-fidelity audio experience with Hi-Res Audio support, offering stunning clarity and every nuance revealed as the artist intended. Hi-Res Audio Wireless and LDAC technology ensure wireless streaming of your favorite music with uncompromising sound quality. Benefit from HDMI connectivity, enabling high-definition audio and video playback through the 11'' display, guaranteeing a limitless entertainment experience. The built-in Bluetooth feature facilitates seamless wireless connections for hands-free phone calls and audio streaming. The iLX-F511A also provides the option to add up to four cameras, enhancing visibility and safety around your vehicle. Experience precise adjustability with the display angle, ranging from +45 degrees to -20 degrees, to suit your dashboard and viewing preferences. The display height can also be adjusted up to +/- 3cm, ensuring a perfect fit into virtually any dashboard with a 1 or 2 DIN slot. The iLX-F511A is completed with an Alpine KAE-1DB Blanking Plate, adding a neat finishing touch to the 2-DIN fascia opening, concealing wiring and electrical components for a seamless look. With Alpine's premium 11'' multimedia infotainment system, the iLX-F511A, elevate your driving experience in the D-MAX with unrivaled entertainment, connectivity, and performance.

Say goodbye to crawling into the back of your truck every time you need to reach your gear. Removing your tools, gear and boxes becomes easier, quicker and safer with a Front Runner Cargo Slide. Hold open feature prevents the slide from closing when on uneven surfaces. Push to close dual latching lock securely keeps the unit closed and rattle-free. Load Rating: 250kg / 551.2 lbs. Designed for the worlds toughest roads. The flat drawer contains multiple tie down points and three cargo attachment channels for securing gear with the Stratchits or other style straps. High strength, sealed bearings allows the tray to extend nearly 100% from the anchored base. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products. Mounts to flat surfaces. Depending on application, drilling into vehicle may be required. Designed for interior use only with a canopy, camper shell, or other style load bed cover. All Front Runner Storage Systems are backed by a 2 year warranty. Note: This cargo slide will only fit certain sized pickup truck load beds and vehicle cargo holds. Please see SPECS for exact product measurements and to determine if this product is the right fit. All vehicles with optional bed liners must check internal measurements. If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase. Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8. Features Consists of: 1 x Cargo Drawer unit 3 x Accessory channels Installation Hardware Fitting Instructions Materials used: Black powder coated high strength steel Carpeted & Laminated plywood Product Dimensions: Closed: 1800mm (70.9") L x 1125mm (44.3") W x 112mm (4.4") H Open: 3200mm (126") L x 1125mm (44.3") W x 112mm (4.4") H Inner Tray Dimensions: 1786mm (70.3") L x 940mm (37") W x 50mm (2") H Width needed between load bed wheel arches: 1022mm (40.2") Weight: 67.2kg (148.2lbs) Load Rating: 250kg (551.2lbs)

The JL Extreme mounting system bolts to existing mounting points on the chassis and roll cage. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels with the rack in place. The windscreen can also be lowered without any interference. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. These Foot Rails allow for a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table) to be fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* *Suitable for most Raised Air Intakes / Snorkels fitments. Confirm fitment with Air Intake / Snorkel fitment guide. NOTE: This Kit cannot be used together with the soft top roof or Sky One-Touch Power top. Note: This is not suitable for the Mojave Edition of the Jeep Gladiator. Features KRJW036T - Jeep Wrangler JL 4 Door (2018-Current) Extreme Slimline II Roof Rack Kit Consisting of: 1x FAJL002 - Jeep Wrangler JL (2018-Curr) Foot Rails 1x FAJL003 - Jeep Wrangler JL (2018-Curr) Inner Brackets 1x FAJL009 - Jeep Wrangler JL (18-Curr)Front Bar RRack Mount 1x RRSTJ12 - SLII Tray - 1425mm(W)X2368mm(L) Material used: Black epoxy powder - coated T6 aluminium High strength steel Approximate Installed Weight: 46.14kg (101.72lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above. If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters. If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 445mm (18") Length: 1720mm (68") Height: 440mm (17") Shipping Weight: Weight: 54kg (119lbs)

The Front Runner Gullwing window replaces the rear window of a Land Rover Defender allowing easy access to the cargo bay via the side of the vehicle.While built for off-road durability and ease of use, the Front Runner Aluminum Gullwing Window looks smart and was designed to blend seamlessly with the exterior stylings of the vehicle. Fits in minutes, no modifications required. Sealed with the same durable, weather resistant powder coating as the Front Runner Slimline II Roof Rack. Includes 2 locking latches. The Land Rover Defender can be brought back to stock within minutes by removing and replacing with standard window. Note: The glass and aluminium panels for the Land Rover Defender are not interchangeable.   Consists of:1x Aluminium gullwing door assembly1x Outer frame1x Fastening kit2x Gas struts1x Right side inner bracket1x Left side inner bracket1x Top inner bracket1x Bottom inner bracketMaterials used:Black powder-coated 3mm aluminiumBlack powder-coated 2mm mild steel reinforcement plateBlack powder-coated high strength steelProduct Dimensions:Overall: L 1120mm (44.1") x W 50mm (2") x H 490mm (19.3")Door Panel: L 1044mm (41.1") x H 414mm (16.3")Weight:15.5kg (34.2lbs)

Customized your Mazda BT50 for weekend getaways and sporty adventures with this sleek, lightbar ready, Slimsport Roof Rack Kit. The wind fairing features a 40" cut out to allow the use of the Front Runner 40” LED Slim Light Bar, so your adventures can continue well into the night. This rack kit has over 55 compatible accessories to suit your camping or sporting gear needs.  This low-profile flat deck Slimsport rack has a load carrying area of 1384mm (54.5") x 1141mm (44.9"). The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength. The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories. Easily add on the Rack Accessory Mounting Bracket Slimsport Side Mount Accessory Bracket / Small for most Front Runner side mount accessories (sold separately). Included in the Mazda BT50 (2020-Current) Slimsport Rack is the Isuzu D-Max / Mazda BT50 (2020-Current) Slimsport Rack 40" Light Bar Wind Fairing that has a 40" cutout to allow the use of the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately). Fitment guide and all mounting hardware included. 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately). Note: Drilling maybe required for some models. Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range. All Front Runner Racks are backed by a Limited Lifetime Warranty*

POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY. NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY. This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS *** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS ! This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself. As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required. Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle. The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain. This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design. NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!

Please note: Images may differ from the actual product. Please check all specifications carefully before purchasing. If you're unsure or have any questions, please contact our team on 1300 856 888 before ordering. CLEARVIEW Original Towing Mirrors for Isuzu Mu-X 2014 - 2019 Enhance your towing experience with the Clearview Original Towing Mirrors, specifically designed for the Isuzu Mu-X 2014 - 2019. Built for modern vehicles, these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance. Featuring power-fold function, indicators and electric mirror adjustment, these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads. Key Features & Benefits Power-Fold Function – Folds the mirrors in and out electrically Integrated Indicators – Improves visibility to other road users Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle Factory-Style Design – A refined, OEM-style mirror appearance Heavy-Duty Construction – Built for Australian towing and touring conditions Available Finish – Black Sold As A Pair – One left-hand and one right-hand mirror included Vehicle Compatibility Isuzu Mu-X 2014 - 2019 Specifications Mirror Type: Original Towing Mirrors Adjustment: Electric Fitment: Direct replacement Sold As: Pair (left and right mirrors) Product Code: CV-HI-DC2012-FIEB Why Choose Original Towing Mirrors? Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution. About Clearview Accessories Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety, visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions. Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads. Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle types, styling preferences, and towing requirements. Clearview products are trusted by touring drivers and towing users for their durability and practical design. Key Product Range Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing Mirror Accessories & Replacement Parts – Components for maintenance and upgrades Towing & Vehicle Accessories – Additional products to enhance towing setups Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance— helping drivers maintain clear visibility and confidence when towing in all conditions.

Suits Nissan Patrol Y62 Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1110mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 600mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 1000mm Internal drawer width = 525mm  

Suits Toyota Landcruiser 200 Series GXL/VX/Sahara Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

MSA LANDCRUISER 100 SERIES RIGHT STORAGE DRAWER SYSTEM-E1030-LC100-RI-COM Designed from the ground up, the way a quality 4WD storage system should be. Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System. MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use. The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options. The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system. FEATURES:  100% Drawer extension for complete access Patented “Stay-Open Block” Rust resistant sealed bearings with Nylon rollers Internal LED Light Strip Safe and secure lock system Dust resistant seal Stainless steel fasteners Removable wing and face panels INCLUDES: Complete wing kits Cargo Barrier mounting points Child restraint points MSA 4X4’s Lifetime Guarantee PARTS INCLUDED: Right Drawer Module Right Fit Kit (includes floor extension) Right Wing Kit Single Width Trim EXTERNAL DIMENSIONS  +10mm for rear anchor bolts Overall drawer length = 1045mm (including handle lock) Overall drawer height = 275mm Overall single drawer width = 530mm (no wings) INTERNAL DIMENSIONS Usable drawer height = 215mm (upto under side of the top deck) Drawer height = 211mm Internal drawer length = 930mm Internal drawer width = 453mm  

Mitsubishi Triton 2015-02/2024 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1155 Suits Mitsubishi Triton 2015-02/2024 Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Heated – Heated mirror glass to demist in cold or wet conditions Bsm Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Mitsubishi Triton 2015-02/2024 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1155 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

300 Series Gx 07/21-01/2025 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM2250 Suits 300 Series Gx 07/21-01/2025 Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: 300 Series Gx 07/21-01/2025 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM2250 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Isuzu Dmax Sept 2020-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM951 Suits Isuzu Dmax Sept 2020-Current Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Bsm Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Isuzu Dmax Sept 2020-Current Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM951 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Ford Ranger, 2012-05/2022 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM651 Suits Ford Ranger, 2012-05/2022 Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Ford Ranger, 2012-05/2022 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM651 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Ford Ranger, 2012-05/2022 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM650 Suits Ford Ranger, 2012-05/2022 Colour Black Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Heated – Heated mirror glass to demist in cold or wet conditions Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Ford Ranger, 2012-05/2022 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM650 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Amarok- 2009-03/2023 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM101 Suits Amarok- 2009-03/2023 Colour Black Type Non Power Fold Key Features Heated – Heated mirror glass to demist in cold or wet conditions Radio Electric – Electric mirror adjustment from inside the cabin Gps No Indicators Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Amarok- 2009-03/2023 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM101 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Lc70-79 Landcruiser - 1984-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM403 Suits Lc70-79 Landcruiser - 1984-Current Colour Chrome Type Non Power Fold Key Features Electric Kit – Includes an electric adjustment upgrade kit Big Base – Reinforced big base mounting for extra stability Indicators – Integrated indicators for improved road visibility Switch Kit Included. Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Lc70-79 Landcruiser - 1984-Current Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM403 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Lc70-79 Landcruiser - 1984-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM402 Suits Lc70-79 Landcruiser - 1984-Current Colour Black Type Non Power Fold Key Features Electric Kit – Includes an electric adjustment upgrade kit Big Base – Reinforced big base mounting for extra stability Indicators – Integrated indicators for improved road visibility Switch Kit Included. Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Lc70-79 Landcruiser - 1984-Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM402 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Nissan Y62 Patrol-2013-Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM251 Suits Nissan Y62 Patrol-2013-Current Colour Chrome Type Power Fold Key Features Heated – Heated mirror glass to demist in cold or wet conditions Electric – Electric mirror adjustment from inside the cabin Indicator – Integrated indicators for improved road visibility Puddle Light – Puddle lights illuminate the ground when entering or exiting Camera Memory – Memory function recalls your preferred mirror position Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Nissan Y62 Patrol-2013-Current Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM251 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Ford Everest 2015-05/2022 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM1854 Suits Ford Everest 2015-05/2022 Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Heated – Heated mirror glass to demist in cold or wet conditions Bsm Puddle Light – Puddle lights illuminate the ground when entering or exiting Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Ford Everest 2015-05/2022 Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM1854 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Lc76/78 Landcruiser [Plug & Play Electrics], 09/2023 - Current Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM404 Suits Lc76/78 Landcruiser [Plug & Play Electrics], 09/2023 - Current Colour Black Type Non Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Specifications Mirror Type: Towing Mirror (Non Power Fold) Vehicle Fitment: Lc76/78 Landcruiser [Plug & Play Electrics], 09/2023 - Current Colour: Black Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM404 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Isuzu Dmax/Mux/Colorado/Col7 2012-2021 Towing Mirrors MSA 4X4's patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide, extending out when towing and returning to a normal driving position when not. Designed and tested to meet Australian guidelines requiring the driver to see 20m past the widest point of the towed vehicle. Product Code TM851 Suits Isuzu Dmax/Mux/Colorado/Col7 2012-2021 Colour Chrome Type Power Fold Key Features Electric – Electric mirror adjustment from inside the cabin Indicators – Integrated indicators for improved road visibility Powerfold – Power-fold function, mirrors fold in and out with the vehicle Four Mirror Positions – fits garages and tight spaces, towing camper trailers and horse floats, tray backs and wider service bodies, or large vans and wide loads Large Single Mirror Lens – wide field of view with less confusion than split-mirror designs Heavy-Duty Extension Slide – vertical and horizontal adjustment with a unique pivot design Fold Inwards or Outwards – protects the mirror if bumped in car parks or by roadside obstacles ADR Compliant – meets Australian road-legal visibility requirements Injection Moulded & Die-Cast Aluminium – built tough for Australian conditions Power Fold Operation When the mirror is rotated into the horizontal position, the mirror's actuator automatically adapts, retaining the standard adjustments (up, down, side to side) from the vehicle's factory mirror controller. This applies to vehicles with factory-fitted Electric Mirror Control only. Specifications Mirror Type: Towing Mirror (Power Fold) Vehicle Fitment: Isuzu Dmax/Mux/Colorado/Col7 2012-2021 Colour: Chrome Adjustment: Electric Sold As: Pair (left and right mirrors) Product Code: TM851 Includes MSA 4X4's 5 Year Warranty About MSA 4X4 MSA 4X4's Towing Mirrors mount onto the vehicle door in the same position as the existing mirrors, retaining most factory mirror functions. Manufactured from injection moulded and die-cast aluminium, they're built to withstand Australian conditions and suit a growing range of towing vehicles, from caravans and camper trailers to boats and horse floats. The mirror design is protected by patents and design registrations in Australia and internationally.

Features Hi-Res Audio certified 2-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm Cutout diameter: woofer 142mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

ALPINE 200 SERIES 2008-2015 GX / GXL AND 2016+ GX -9" SOLUTION WITH HIRES SCREEN , WIRELESS APPLE AND ANDROID AND PFK KIT -I905-LC08 Alpine’s innovation continues with the unique design of the i905-LC08, delivering an innovation masterpiece created for the digital era. Housed within the premium OEM quality fascia is the all-new 9″ WXGA high definition display that showcases all your media in stunning contrast and clarity. The new keyset with centre glass keys are immediately identifiable as a signature Alpine product, and has a great tactile feel and feedback. Equipped with wireless Apple CarPlay and Android Auto (USB), an endless array of entertainment and smartphone apps are available to use in your dashboard. Get directions with maps and navigation apps, send and receive messages, make calls and listen to music all without a cable in sight. With TIDAL now built-in, soak in your favourite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio like you’ve never heard it before. For those with a large existing library of Hi-Res audio content that is also supported up to 96kHz 24bit. A world-first innovation, the i905-LC08 equipped with a powerful built-in Class-D amplifier to deliver the richness and dynamics of your music for the most superior sound performance. Moreover, with Alpine’s extensive sound tuning built-in you can apply simple one touch audio adjustments to make your cabin space sound brilliant, or for pro-level users and enthusiasts a host of advanced tuning functions are available. Alpine’s i905-LC08 is the complete audiophile and lifestyle solution for all 200 Series enthusiasts—not only creating a dynamic interior appeal, but also delivering an incredible connectivity and multimedia experience with impeccable audio performance. Alpine I905-LC08 to suit 200 Series LandCruiser 9Inch replacement with Wireless Apple Carplay Introducing the i905 for LandCruiser 200 Series, now available for purchase! This cutting-edge 9" integrated audio receiver delivers high-resolution audio and comes equipped with Wireless Apple CarPlay, Android Auto (USB), HDMI, USB, dual camera, Bluetooth, Hi-Res Audio Wireless, LDAC, and DAB+ functionality. Designed specifically for the LandCruiser 200 Series (model years 2008-2015), the i905 offers seamless connectivity and crystal-clear sound quality. Upgrade your driving experience with the i905 for LandCruiser 200 Series. The Alpine i905-LC08 is a remarkable product, designed to cater to the digital era. It is housed within a premium OEM quality fascia, which holds a 9” WXGA high-definition display that showcases all your media with clarity and stunning contrast. The new keyset features centre glass keys that are easily recognizable as an Alpine signature product and have a great tactile feel and feedback. The i905-LC08 comes with wireless Apple CarPlay and Android Auto (USB), allowing access to a wide range of entertainment and smartphone apps without any cables. With TIDAL now built-in, you can stream your favorite songs with a new level of fidelity and elevate your music streaming experience in wireless Hi-Res audio. For those with a large existing library of Hi-Res audio content, the device supports up to 96kHz 24bit. The i905-LC08 is a complete audiophile and lifestyle solution for all 200 Series enthusiasts. It not only creates a dynamic interior appeal but also delivers an incredible connectivity and multimedia experience with impeccable audio performance. The device is equipped with a powerful built-in Class-D amplifier that delivers the richness and dynamics of your music for the most superior sound performance. Additionally, with Alpine’s extensive sound tuning built-in, you can apply simple one-touch audio adjustments to make your cabin space sound brilliant. For pro-level users and enthusiasts, a host of advanced tuning functions are available. Alpine’s incredible WXGA display features laminated display technology that provides brightness and contrast that is truly next level. The display technology is enhanced by the device’s built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity, which ensures your actual vehicle position has pin-point accuracy on the road. The i905-LC08 also features TIDAL built-in, which allows you to stream all your favorite artists wirelessly in incredible master-quality definition. Additionally, Spotify provides access to millions of tracks and episodes available. With Hi-Res Audio certification and USB and wireless connectivity, the i905-LC08 supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This ensures that no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats. The Alpine i905-LC08 is a complete audiophile and lifestyle solution, offering connectivity and multimedia experience with impeccable audio performance. The device is designed to cater to all 200 Series enthusiasts, creating a dynamic interior appeal and delivering an incredible audio experience. High-Definition Laminated Display Alpine’s incredible WXGA display has to be seen to be believed, colours are intensely vibrant and realistic, video motion is ultra-smooth and the image detail is razor sharp. Moreover, with its laminated display technology brightness and contrast is truly next level, so no matter the lighting conditions or viewing angle the display reveals incredible clarity and true-to-life colour. Alpine’s new WXGA high definition display is simply stunningly beautiful—bringing a cinematic experience right into your dashboard. Apple CarPlay Wireless or USB No wires, no fuss, just get in and drive with your iPhone wirelessly connected to use Apple CarPlay. Listen to your favourite music apps, make and receive calls or messages, use maps or navigation apps, all at your command via the display or voice control. If you need to charge-up then plug-in your iPhone via USB. Android Auto  The convenience of Android Auto lets you bring the ever-expanding apps into the dash of your car. From either the display or voice command you can make calls, send and receive messages, play music apps or set a destination via Google Maps or Waze.   Smartphone Navigation  Through the incredible Alpine WXGA high-definition display you have the access and convenience of highly accurate navigation, further enhancing the Apple CarPlay and Android Auto and experience. With an array of navigation platforms and apps available, for example Apple Maps, Google Maps, Waze and Sygic you can search and get to your destination with ease. You’ll have voice and visual prompts of turn-by-turn navigation and finding locations is a breeze via the display or using voice control. Furthermore, with the built-in GPS/GLONASS circuit and antenna, as well as vehicle speed pulse sense connectivity ensures your actual vehicle position has pin-point accuracy on the road. This keeps you on route when driving through complex and dense city road systems, tunnels, bridges and elevated mountain highways and terrains. Tidal Built-In With TIDAL built-in, stream all your favourite artists wirelessly in incredible master-quality definition. Providing you exclusive access to high-profile music and original content – experience a more intimate connection with music creators through intuitive playlist curation and ability to save your favourite albums, tracks or playlists to the preset menu for quick access. Furthermore, MQA Studio playback ensures absolute audio authenticity, exactly to the artists original recording. Never before seen in car audio, TIDAL’s wireless Hi-Res audio streaming is a must for the modern audiophile. Spotify Access the worlds music library with millions of tracks and episodes available on Spotify. When using Apple CarPlay or Android Auto with the Spotify app, you can play the latest songs from your favourite artists, charts and playlists. Plus, browse through the collections of friends, artists, celebrities and radio stations all from the comfort of the driver’s seat. All this, without a single physical connection thanks to the added convenience of Wireless Apple CarPlay and Android Auto. Hi-Res Audio Certified with USB and Wireless Connectivity Audiophile and music fans can now enjoy a true high-fidelity audio experience with the astonishing detail and musical beauty of Hi-Res Audio. The i905-LC08 supports up to 192kHz/24Bit FLAC/WAV and APE high-resolution audio files with their intended playback specification of 96kHz/24Bit. This means, no longer do you have to compromise your listening experience lost in highly-compressed traditional audio formats, in Hi-Res your music now comes alive with stunning clarity and every nuance revealed, just as the artist intended. When playing Hi-Res Audio files the i905-LC08 will display the Hi-Res icon and file bit rate. Even more impressive, equipped with Hi-Res Audio Wireless and LDAC technology, you can connect your smartphone via USB or wirelessly and use Hi-Res Audio streaming services or apps bringing a virtually limitless music library with the purest sound right inside your car. Built-in Class-D Amplifier An industry world first, the i905-LC08 is equipped with Class-D amplifier technology producing a massive 50 x 4 Watts of power, delivering the best sound quality and dynamics from high-resolution music. Class-D amplifiers are known to be highly efficient and capable of beautiful high-end sound reproduction with significantly reduced noise and phase shift. What’s more, new ultra-high-spec fans and internal heat sinks direct and dissipate any unwanted heat, ensuring optimum temperature control and audio performance. External Control Knob (RUE-BK01A sold separately) The RUE-BK01A external control knob (sold separately) connects wirelessly to the i905-LC08 and can be installed on either side of the display for added convenience. Alternatively, you can place the control knob anywhere else within the vehicle and for custom installation professionals the mounting possibilities are virtually endless. Rotation of the knob controls the unit volume output, while a push of the knob will cycle through your vehicles safety cameras on screen.   Advanced Sound Tuning Alpine sound quality performance is of the highest standards and with advanced sound tuning you are empowered with the tools to tune your system to perfection, as well as to the specific environment of your vehicle. Featuring a 56-band Parametric EQ in the advanced mode, a 2-way digital crossover, 6-channel digital time correction, plus several Bass Engine SQ and MediaXpander settings provides sound tuning for simple to comprehensive high-end systems with multiple power amplifiers, speakers and subwoofers. DAB+ Digital Radio  DAB+ provides you with a range of quality digital only stations that you can search by station name and genres. DAB+ offers a variety of stations with music eras and types, as well as talkback stations. DAB+ displays station info and music metadata, offers clearer sound and improved reception, achieving a noise free, crystal clear radio listening experience. Audio Streaming Apps With Apple Music onboard for Apple CarPlay you have access to 60+ million ad-free songs at your fingertips which you can search genres, artists, podcasts and expertly crafted playlists. With the use of Apple CarPlay or Android Auto, Amazon Music and YouTube Music provides limitless entertainment to stream or download songs from a list of over 40 million ad-free tracks. Amazon Music, YouTube Music and Apple Music are paid subscriptions. 2 x USB Connections The two rear USB ports allow for even greater flexibility. USB port 1 provides fast charging of your smartphone while using wireless connectivity, or you can connect your smartphone for wired connection of Apple CarPlay and Android Auto. Either USB Port 1 or 2 are your entertainment gateway, allowing audio and video playback via connection of a memory stick, portable drive or SSD. Built-In Bluetooth  Built-in Bluetooth enables wireless connection of a mobile phone for the convenience and safety of hands free phone and audio streaming. Plus, you can use voice control through the external microphone included. HDMI Connectivity  HDMI enables connectivity to a number of different devices including smartphone mirroring—making audio and video playback possible in high-definition through the 9” display for virtually limitless entertainment. Four Camera Input  The i905-LC08 provides the opportunity to add a reverse and either front or side camera directly to the unit itself. Those with a need for even more visibility requirements now have the ability to increase to a whopping 4 camera’s through the KCX-C250MC Multi-Camera Selector Interface (sold separately). All connected camera’s can be toggled directly from the camera screen, allowing a commanding view of any potential obstacles around your vehicle. Features Radio / DAB Tuner Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12) Memory: Auto Memory Seek Mode: Local, DX, Pre-Set, Service RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT DAB+/DMB Supported DAB+ Slideshow Service DLS (Dynamic Label Service) DAB Service Following RDS Fallback (where available) Auto Ensemble/Service Memory Service Search Function PTY Search Function Alphabet Search Function BLUETOOTH® Built-in BLUETOOTH® Module V4.2 HFP (Hands-Free Profile) Compatible A2DP (Advanced Audio Distribution Profile) Compatible AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible Phone Book Synchronisation Speed Dial: 4 Preset Memory (per phone) Call History Display: Outgoing Calls / Incoming Calls / Missed Calls Redial Function Speech Volume Level Adjustment: (Outgoing and Incoming) 24 Menu Languages Microphone Included Works with iPhone® Compatible with iPhones featuring a lightning connector Various search functions and Album Artwork Display Battery Charging Connectivity Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone) Works with Android Auto (requires Android Auto enabled handset connected through USB)   **Not all handsets supported Navigation Function Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps Includes GPS / Glonass enabled navigation antenna USB Media Connection 2x USB cable included USB port 1: data port / USB port 2: charging port Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible Video Playback: MP4, MOV, FLV, MKV compatible Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2 Various search functions included Sound Tuning Bass Engine SQ and Bass Engine PRO sound tuning Subwoofer Level Adjustment 4 V PreOut 10 Equalizer PreSets 13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer 6-Channel Digital Time Correction 2-way Digital Crossover Independent Source Volume Level Setting General 4x 50 Watts Class-D High Power Amplifier 11-inch Capacitive Touch-Screen WXGA Display (1280 x 720p) Display angle adjustable after installation 3 PreOuts (4 V, Front / Rear / Subwoofer) 1 A/V AUX Input (3.5 mm micro jack) 1 HDMI input / 1 HDMI output 2 USB Ports (1x USB data port / 1x USB charging) Steering Wheel Remote Control Ready Vehicle Display Interface Ready (UART connection) Remote Control Ready 2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box Camera Distance Guides (adjustable) Live Contrast Adjustment Menu Language: 24 Languages Auto Dimmer Anti-theft security code Engine Start-Stop unaffected 3-Year Warranty when installed by Authorised Alpine Dealer Specifications General Power Requirement – 14.4V DC (11-16V allowable) Operating Temperature – -20°C to +60°C Power Output – 50W x 4 Maximum Current Consumption – 15A Audio Output Level Preout (Front, Rear): 4V/10k ohms (max.) Preout (Subwoofer): 4V/10k ohms (max.) Weight 2.3kg Screen Screen Size: 9 inch Laminated WXGA LCD Type: Transparent Type TN LCD Operation System: TFT Active Matrix Illumination System: White LED Backlighting Effective Number of Picture Elements: 99.99% Colour System: NTSC, PAL FM Tuner Tuning Range –   87.5 -105MHz Mono Usable Sensitivity –   8.1 dBf (0.7μV/75 ohms) 50dB Quieting Sensitivity –   12dBf (1.1μV/75 ohms) Alternate Channel Selectivity –  80dB Signal-to-Noise Ratio –  65dB Stereo Seperation –  35dB AM Tuner Tuning Range –   531-1701 kHz Usable Sensitivity –  25.1μV/28 dBf DAB Tuner Tuning Range –   174 – 240 MHz Usable Sensitivity –   -100dBm Signal-to-Noise Ratio – 90dB USB (1) USB Requirements: USB 2.0 Max. Power Consumption: 2,400 mA (CDP Support) USB Class: Mass Storage Class, Play From Device File System: FAT 16/32, exFAT MP3 Decoding: MPEG-1/2 AUDIO Layer-3 WMA Decoding: Windows Media™ Audio AAC Decoding: ACC-LC format ′′.m4a′′ file FLAC Decoding Number of Channels: 2-Channel (Stereo) Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate Total Harmonic Distortion (at 1kHz): 0.005% DynamicRange(at 1kHz): 95 dB Signal-to-Noise Ratio: 95 dB Channel Separation (at 1kHz): 90 dB USB (2) USB Class: Charge Only Max. Power Consumption: 1,500 mA (CDP Support) BLUETOOTH® BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz) Output Power: +4 dBm/2.51 mW Ave. (Power Class 2) HFP: HFP (Hands Free Profile) OPP (Object Push Profile) PBAP (Phone Book Access Profile) HSP (Head Set Profile) A2DP: A2DP (Advanced Audio Distribution Profile) AVRCP: AVRCP (Audio/Video Remote Control Profile) SPP (Serial Port Profile) HDMI Section Input Format: 720p/480p/VGA Output Format: 720p/480p GPS Reception Frequency 1575.42 +/- 1.023 MHz Reception Sensitivity (Search) -136dB max. Wi-Fi Frequency Ranges IEEE 802.11 b/g/n (2.4 GHz) IEEE 802.11 a/n/ac (5 GHz) Channels 1 -13 ch (2.4 GHz) 149 – 165 ch (5GHz) Security Protocols WPA3/WPA2-PSK (TKIP, AES) Dimensions Din Size: 1DIN chassis and 9” Capacitive Touch Screen Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm Display Size (W x H x D) mm: 268.9 x 178 x 54.7

ALPINE R2 SERIES TRUCK BOX ( DUAL 8" ) -R2-DB8V-TRK Designed for Trucks – These enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications. Integrated Amp Tray – Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately). Next-Gen Performance – The ported subwoofer enclosures feature the next generation 8” R2-Series Subwoofers with a more powerful motor that creates deeper, more accurate bass. Alpine Halo Design – The enclosure pulls design cues from the Alpine Halo Display with unique, curved edges outlined by a silver trim and a front link bracket cover with an Alpine logo badge. What's in the box Driver Side Enclosure Passenger Side Enclosure Front/Rear Link Bracket Front Cover/Trim Bars Left/Right Amp Tray Bracket Stacking Feet for Enclosure 6 Standard Stacking Feet (Rubber/Washer/Rubber) 2 Pair Extra Parts (Rubber/Washer) Product information Model Name R2-DB8V-TRK Speaker Type Surround Sound, Subwoofer Recommended Uses For Product Vented Subwoofer Diameter 8 Inches Unit Count 1.0 Count Included Components Left/Right Amp Tray Bracket, Front Cover/Trim Bars, Driver Side Enclosure, Passenger Side Enclosure, Stacking Feet for Enclosure, 6 Standard Stacking Feet (Rubber/Washer/Rubber), 2 Pair Extra Parts (Rubber/Washer), Front/Rear Link Bracket Is Waterproof FALSE Number of Items 2 Control Method Voice Speaker Size 8 Inches Power Source Corded Electric Vehicle Service Type Truck Audio Driver Size 8 Inches Subwoofer Connectivity Technology Wired Is Electric Yes UPC 793276084569 Manufacturer Alpine Product Dimensions 27 x 18 x 18 inches Item Weight 54.7 pounds ASIN B09M45R9HC Item model number R2-DB8V-TRK Best Sellers Rank #412,694 in Electronics  Other display features Wireless Date First Available November 17, 2021