ALPINE Premium Sound System for 2016–2022 FORD RANGER R2 SERIES...
$989.96
$1,099.95
Alpine R2-Series Premium Speaker System – FORD RANGER PXII / PXIII (Front & Rear)
Upgrade your Ford Ranger with powerful, high-resolution sound. The Alpine R2-Series Premium Speaker System is a direct-fit upgrade designed to deliver deep bass, crystal-clear highs, and true Hi-Fi performance — all without modifying your vehicle.
Built specifically for the FORD RANGER PXII and PXIII, this complete front and rear speaker system transforms your in-car audio with premium materials, advanced engineering, and seamless integration.
Key Benefits
Direct-fit upgrade for FORD RANGER PXII / PXIII
Complete front and rear speaker system
Plug-and-play installation — no cutting or soldering required
High-resolution audio with extended frequency response up to 40kHz
Enhanced bass performance with larger magnet structure
Premium tweeter housing for improved sound staging and interior aesthetics
Vehicle Fitment
FORD | RANGER | PXII / PXIII
Direct Fit Integration
Designed specifically for the Ford Ranger, this system integrates seamlessly with factory mounting points and wiring. All components are pre-assembled with plug-and-play connections, allowing for a straightforward installation with no modifications required.
Premium Tweeter System
1” magnesium hard-dome tweeters for ultra-clear sound
Hi-Res Audio certified with response up to 40kHz
Swivel design to optimise sound direction and staging
Custom A-pillar housing with premium Alpine finish
Powerful Woofer Performance
Glass-fibre reinforced cone for fast, accurate response
Larger magnet structure for deeper, stronger bass
HAMR surround for increased cone movement and output
Shallow mounting design for easy installation
Advanced Audio Engineering
Dual gap voice coil for improved clarity and linearity
High-quality in-line crossover network included
Adjustable tweeter levels (-3dB / 0dB / +3dB)
Bi-amp ready design for advanced setups
Specifications
Peak Power: 300W
RMS Power: 100W
Impedance: 4 Ohms
Frequency Response: 65Hz – 40kHz
Woofer Size: 16.5 cm (6.5")
Mounting Depth: 5.9 cm
Magnet: Neodymium
Why Choose Alpine R2-Series
Engineered specifically for vehicle-specific fitment
Premium materials for superior sound quality
Designed for both performance and aesthetics
Trusted Alpine audio engineering
FAQs
Is this a direct fit for my Ranger?Yes, it is designed specifically for FORD RANGER PXII and PXIII models.
Do I need to modify wiring?No, it features plug-and-play connections with no cutting or soldering required.
Does this include both front and rear speakers?Yes, this is a complete front and rear speaker upgrade system.
Will this improve bass performance?Yes, the upgraded magnet structure and HAMR surround provide significantly improved bass output.
Upgrade Your Ranger’s Sound System
Experience premium audio performance with a system designed specifically for your vehicle. The Alpine R2-Series delivers clarity, power, and precision in every drive.
MSA 4X4 Towing Mirror Py Ford Ranger/Ub Ford Everest 06/22-On,...
$1,529.10
$1,699.01
Ranger & Everest MSA POWER FOLD™ Towing MirrorsPRODUCT CODE: TM2652VEHICLE DATE: 06/2022-Current
PRODUCT TYPE: Power Fold SUITS: Ford Ranger PY & Everest UB
Black, Electric, Heated, Indicators, Blind Spot Monitoring, Camera Provision, Temp Sensor, Puddle Light, Power Fold
FEATURES:Camera provisionPower FoldFour different mirror positionsLarge, single mirror lensAdjustable viewing anglesVertical and horizontal adjustmentUnique pivot designFold inwards or outwardsADR CompliantInjection moulded and die-cast aluminium components
INCLUDES:MSA 4X4’s 5 Year WarrantyMSA POWER FOLD™ is a trademark used under licence MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
Clearview Black Classic Towing Mirrors Ford Ranger Px Oct 2011...
$485.10
$539.00
CLEARVIEW Classic Towing Mirrors for Ford Ranger Px Oct 2011 - 2021
Enhance your towing experience with the Clearview Classic Towing Mirrors,
specifically designed for the Ford Ranger Px Oct 2011 - 2021. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring electric mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle
Extendable Towing Mirrors – Improves visibility when towing wide loads
Large Convex Mirror – A single wide-angle mirror for a broad field of view
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Black
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Ranger Px Oct 2011 - 2021
Specifications
Mirror Type: Classic Towing Mirrors
Adjustment: Electric
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CVT-FR-PX-EB
Why Choose Classic Towing Mirrors?
Clearview Classic mirrors are designed to provide reliable, heavy-duty towing visibility with a traditional extendable design. With a large convex mirror and wide field of view, they extend to improve visibility when towing, while offering robust construction built for Australian conditions.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
MSA Ford Ranger Towing Mirrors (Black Heated Electric Indicators) 2012-Current...
$888.30
$987.00
FORD RANGER - TOWING MIRRORS (BLACK HEATED ELECTRIC INDICATORS) 2012-CURRENT Year: 2012-CURRENT Model: FORD RANGER / Black / Heated / Electric / Indicators
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included: 1 x Left hand side mirror 1 x Right hand side mirror 1 x Installation instructions
SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm
MSA Ford Ranger Towing Mirrors (Chrome Heated) 2012-Current - TM601
$837.90
$931.00
FORD RANGER - TOWING MIRRORS (CHROME HEATED) 2012-CURRENT Year: 2012-CURRENT Model: FORD RANGER / Chrome / Heated / Electric / No Indicators
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included: 1 x Left hand side mirror 1 x Right hand side mirror 1 x Installation instructions
SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm
MSA Ford Ranger Towing Mirrors (2015-May 2022) - TM604
$789.30
$877.00
DESIGNED & TESTED FOR TOWING!
Towing Mirrors no longer need to look ugly.
The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror adjuster. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.
The MSA 4x4 patented Towing Mirrors are manufactured extremely tough and WILL NOT VIBRATE ON TOUGH ROADS! Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
DIRECTION-PLUS Ryco Pre-Filter Kit Next-Gen Ford Ranger / Everest &...
$462.60
$514.00
Direction Plus™ Ryco Pre-Filter Kit RC671DPK is designed, engineered & assembled in Australia to suit Ford Next Gen Everest & Ranger models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
UPDATE: Version 2 bracket released November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches)
This kit fits:
Ford Next-Gen Ranger & Everest (BF2S 3.0L 6cyl) 2022- On
Compatible with Dual Battery Systems
Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On
Compatible with Dual Battery Systems
VW Amarok Core & Life NF – (DXWA 3.0L 6cyl) 2023- On
Excludes Aventura, Panamericana & Style due to different battery tray
VW Amarok Core & Life NF – (DXK 2.0L 4cyl) 2023-On
Excludes Aventura, Panamericana & Style due to different battery tray
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
MSA Power Fold Towing Mirror Ford Ranger 2012-May 2022 -...
$1,485.00
$1,650.00
MSA 4X4 TM650 -Ford Ranger 2012-May 2022 Black, Electric, Heated, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components
5 Year Warranty
MSA 4X4 Ford Ranger Py Double Storage Drawer System -...
$2,893.50
$3,215.00
MSA 4x4 Ford Ranger PY Double Storage Drawer System- 41013
SUITS: Ford Ranger PY
Ford Ranger PY
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
HSP Load Bar Suits Roll R Cover S3.5 On A...
$550.00
The HSP Load Bar is the ultimate roll-top cross bar rack, ideal for various adventures. Whether you're planning snow trips with the family, biking around the neighborhood in tight lycra, or need a spot to mount your shovel for sandcastle building competitions, the HSP Load Bar has you covered.
Solid Metal Frame
Unlike other models with plastic bases, the HSP Load Bar features a full metal frame, providing a solid foundation for your cargo, ensuring items like your cooler filled with drinks are secure and stable.
Heavy-Duty Cross Bars
Tested to support a load-carrying capacity of 80kg
Future crash test data to be revealed, showcasing the robustness and reliability
Accessory Compatibility
Compatible with major accessory brands such as Rhino-Rack, Thule, and Yakima
Common channel design for easy accessory integration
Simple Installation
Designed specifically for the HSP Roll R Cover
Easy slide-in installation into the HSP Roll R Cover T channel
Why HSP?
Proudly made in Australia, the Roll R Cover Series 3.5 is the only fully Australian-manufactured roll top. Built in custom facilities in Country Victoria, it supports local jobs and the economy. The units are designed and tested locally, ensuring top-notch quality and reliability. HSP is also 100% Australian owned!
Features
Ideal for snow trips, biking, and various adventures
Perfect for mounting accessories like shovels
Full metal construction for a solid foundation
Ensures secure and stable cargo transportation
Load-carrying capacity of 80kg
Future crash test data to be revealed for additional assurance
Compatible with major brands such as Rhino-Rack, Thule, and Yakima
Common channel design for easy integration with various accessories
Specifically designed for the HSP Roll R Cover
Easy slide-in installation into the HSP Roll R Cover T channel
Tested for durability and strength
Provides a secure spot for transporting various items
POLYAIR Standard Bellows Ultimate Airbag Kit, Ford Ranger Raptor -...
$1,495.00
POLYAIR 'ULTIMATE' BELLOWS # 89416ULT LOAD ASSIST COMPLETE 'DOUBLE' AIR BAG KIT suit FORD RANGER 'RAPTOR' SERIES 2 - STANDARD HEIGHT ONLY.
NOTE: FOR 08/2022 Onward Models NEXT GEN. RAPTORS ONLY with O.E. FOX 'COIL-OVER' REAR SHOCKS FITTED ONLY.
This Kit suits ALL O.E.M. STANDARD HEIGHT 'RAPTOR' MODELS ONLY, NOT SUITABLE FOR RAISED HEIGHT RAPTORS
*** NOTE: NOT SUITABLE FOR LEAF SPRING REAR NEXT GEN RANGER UTES or 1ST GEN. RAPTOR MODELS !
This kit offers an EASY, NO DRILL, BOLT-IN FITMENT able to be fitted with ordinary hand tools, yourself.
As the RANGER RAPTOR Model was primarily designed by Ford's Motorsport Dept. as an Off Road Action Vehicle, Polyair wanted to make sure that their Load Assist solution for this action vehicle retained the full downward articulation (Droop) of the Raptors unique suspension while still offering a premium Load Assist solution to maintain a level vehicle when Loaded for Work or for when Towing Duties were required.
Polyair's BELLOWS ULTIMATE KIT includes their unique POLYAIR CRADLE Kit for Maximum Downward Suspension Travel when used as an off road vehicle.
The Kit also uses their latest Polyair Ultimate Bellows which incorporates an INTERNAL BUMP STOP in each Air Bag Bellows for added protection and stopping power in rough terrain.
This Kit offers the Ultimate Solution for this unique off road vehicle without reducing the wheel droop of the FOX Bypass Shocks and Coil-Over Suspension design.
NO DRILLING OR MODIFICATIONS REQUIREDSUPER EASY TO INSTALLDOES NOT LIMIT THE EXSTING RAPTOR SUSPENSION'S 'FULL DROOP' PERFORMANCE - STILL ALLOWING MAXIMUM WHEEL DROOP / FULL EXTENSION.THIS KIT CAN CONBINED WITH ANY OF THE POLYAIR 'WIRELESS' COMPRESSOR SYSTEMS or BOSS ON-BOARD AIR SYSTEMS for even more convenience...2 YEAR WARRANTYFREE AUSTRALIA WIDE SHIPPING ON THIS AIR BAG KIT ONLY!
ALPINE S-Series Hi-Resolution Audio Front And Rear Premium Speaker System...
$629.96
$699.95
Enhance Your Ford Ranger PXII/PXIII with R2-Series Premium Front and Rear Speaker System
Upgrade Your Ford Ranger's Audio System with Alpine's R-Series Premium Speaker System - Direct Fit for PXII/PXIII Models"
Revamp your driving experience with Alpine's R-Series premium speaker system, the perfect upgrade for your Ford Ranger PXII/PXIII. With a sleek design and superior sound quality, the R-Series speakers are engineered to elevate your music listening experience.
Alpine's exclusive tweeter housing design is crafted for maximum sound performance and a striking appearance. The machine-finished metal Alpine logo and contrasting black chrome accent add a touch of elegance to your cabin space.
The R-Series speaker system is designed for a precise and direct replacement of the factory-installed speakers, with a "plug-n-play" connection that requires no modifications, cutting of wires, or soldering. You can upgrade your audio system quickly and easily without any hassle.
The speakers feature a Hi-Res Audio certified hard dome tweeter, delivering ultra-clear and highly detailed sound with a smooth response up to 40kHz. The larger magnet structure ensures incredible bass performance without compromising the driver depth.
The midrange and woofer drivers have an all-new glass-fibre reinforced cone for exceptional rigidity and lightweight construction, resulting in accurate music reproduction. The exclusive HAMR surround provides powerful bass and pure sound at any excursion stage.
Alpine's high-pass X-Over network is easy to install, allowing you to adjust the tweeter level by -3dB / 0dB / +3dB. The R-Series speaker system is the perfect integration of premium design and superior sound quality, providing a seamless upgrade to your Ford Ranger's audio system.
MSA 4X4 Towing Mirror Ford Everest 2015-05/2022. Black, Electric, Indicators,...
$1,552.50
$1,725.00
MSA Power-Fold Towing Mirrors for Ford Everest UA (2015 - 05/2022)
Enhance your towing experience with the MSA TM1850 Power-Fold Towing Mirrors, specifically designed for the Ford Everest UA (2015 - 05/2022). These premium mirrors combine style, durability, and advanced functionality, making them the ultimate upgrade for towing enthusiasts. Available at Brixton 4x4, they ensure safer and more efficient towing for all your adventures.
Why Choose MSA Ford Everest UA Power-Fold Towing Mirrors?
MSA Power-Fold Towing Mirrors are engineered with cutting-edge technology to provide seamless folding, electric adjustment, and superior visibility. Built for Australia’s diverse conditions, they deliver robust performance and a stylish appearance, making them an essential addition to your Ford Everest.
Key Features of Ford Everest UA Power-Fold Towing Mirrors:
Power-Fold FunctionalityEffortlessly fold and unfold your mirrors with a single button press, providing convenience and added protection in tight spaces.
Puddle Lights - puddle lights under the mirrors for convenience nighttime illumination.
Heated GlassBuilt-in defrosting capabilities keep your mirrors clear in cold or foggy weather, enhancing visibility and safety.
Enhanced Towing VisibilityWide-angle mirrors ensure you have a clear view of your trailer and surroundings, enhancing safety.
Blind Spot Monitoring Compatibility: Designed to work seamlessly with your vehicle's blind spot monitoring system, offering added safety.
Electric AdjustmentEasily adjust the mirror position electronically to achieve optimal visibility while towing.
Vehicle-Specific DesignCustom-designed for a seamless fit on Ford Everest UA models, maintaining the original aesthetic while offering advanced functionality.
Integrated LED IndicatorsSleek, built-in LED turn signals enhance visibility to other drivers, promoting road safety during lane changes and turns.
Durable ConstructionMade with heavy-duty materials to withstand harsh Australian conditions and the rigours of long-distance towing.
Simple InstallationDesigned for quick, bolt-on installation without requiring extensive modifications.
Vehicle Compatibility
The MSA TM1850 Power-Fold Towing Mirrors are precisely crafted to fit:
Ford Everest UA (2015 - 05/2022)
These mirrors ensure a perfect match with factory mounting points, eliminating the need for aftermarket adjustments. Upgrade your Ford Everest UA’s towing capabilities with these premium mirrors, available at Brixton 4x4.
Benefits of MSA Ford Everest UA Towing Mirrors:
Unmatched Safety: Improved visibility reduces risks while towing large trailers or caravans.
Sleek Black & Chrome Design: Retains the factory-finished look of your Ford Everest while adding a touch of style.
Weather-Resistant: Built to endure Australia's harsh climates and challenging environments.
Custom Fit: Vehicle-specific design ensures a snug and secure fit.
Special Notes:
Includes MSA 4X4’s 5-Year Warranty for peace of mind.
Compatible exclusively with Ford Everest UA models (2015 - 05/2022).
Not suitable for other Ford models or series.
Professional installation is recommended for optimal performance.
Upgrade Your Towing Today:
The MSA Ford Everest UA Power-Fold Towing Mirrors are more than just an accessory—they’re a towing necessity. Trust Brixton 4x4 for high-quality towing mirrors that ensure safe, stress-free towing while enhancing your vehicle’s functionality and aesthetic.
Take the first step toward a better towing experience—order your MSA TM1850 Towing Mirrors today from Brixton 4x4!
MSA 4X4 Power Fold Towing Mirrors For Mitsubishi Triton Series...
$1,462.50
$1,625.00
VEHICLE DATE: 2015-02/2024
PRODUCT TYPE: Power Fold
SUITS: Mitsubishi Triton
Chrome, Electric, Indicators, Power Fold
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES:
MSA 4X4’s 5 Year Warranty
MSA POWER FOLD™ is a trademark used under licence
FATZ FABRICATION Ra Raptor 5″ P/C Snorkel. Includes Airbox Adation,...
$2,090.00
RA RAPTOR 5″ Snorkel inc Washer bottle
The Ranger Raptor is a substantial step up in the current generation with power to support the exceptional chassis configuration. The Fatz Built RA RAPTOR 5" snorkel incorporates the true RAPTOR ethos with it's oversized yet refined styling. Our Snorkel is built in 304 Grade Stainless steel tube and finished to a true seamless form through a process developed over the 14 years we have been building snorkels. Then powder coated Satin Black to match common accessories on the market. Fitment is key with the need to align with body panels from any angle. Mounting to the A pillar is secure and robust with 3 M6 Nutcerts mounting the folded bracket.
The RA comes from the factory with the washer bottle for the windscreen in the guard cavity making plumbing to the Airbox inlet difficult. Fatz has overcome this with our specifically designed Aluminium replacement unit which fits in the factory location. Resulting in the ability to plumb to the airbox inlet with 4" tubing for maximum airflow as required.
Our snorkels are provided with all components required for installation including all plumbing items needed, cad drawn and scale printed templates, colour photo instruction manual, Fabricated washer bottle, plumbing to airbox and the confidence only purchasing with Fatz can bring.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
MSA 4X4 Everest Left Storage Drawer System - E930-EVERES-LEFT-COM
$1,264.50
$1,405.00
MSA EVEREST LEFT STORAGE DRAWER SYSTEM-E930-EVERES-LEFT-COM
SUITS Ford Everest 7 Seat Model, No removable wing/face panels
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA 1350 Complete Double Drawer System Ford Ranger/ Mazda Bt50...
$2,876.40
$3,196.00
MSA 4X4 Double Storage Drawer System for Ford Ranger PX & Mazda BT-50
Upgrade your vehicle storage and organisation with the MSA 4X4 Double Storage Drawer System, purpose-built for the Ford Ranger PX Series and Mazda BT-50. Designed for touring, trade, and off-road applications, this premium storage system provides secure, organised, and easily accessible storage while maximising the usable space in your vehicle tub.
Featuring MSA 4X4's patented drawer technology, both drawers extend 100% beyond the frame, providing complete access to your gear. Fully sealed stainless steel bearings and nylon rollers ensure smooth, quiet operation under heavy loads, while reducing overall system weight compared to traditional drawer designs.
Constructed from lightweight yet exceptionally strong aluminium with corrosion-resistant components throughout, this storage system is built to handle years of demanding use in harsh Australian conditions.
Key Features
Designed specifically for Ford Ranger PX, PX2, PX3 and Mazda BT-50 UP, UR models.
100% drawer extension for complete access to stored equipment.
Patented Stay-Open Block keeps drawers securely open on slopes up to 30 degrees.
Fully sealed stainless steel bearings with nylon rollers.
Integrated LED light strips illuminate drawer contents when fully extended.
Heavy-duty secure locking system.
Dust-resistant seals help protect stored equipment.
Removable wing and face panels provide access to additional storage areas.
Premium Construction
Lightweight aluminium drawer modules.
Anodised aluminium components for maximum durability.
Rust-resistant stainless steel fasteners throughout.
Smooth and quiet drawer operation under load.
Designed for long-term off-road and touring use.
Safety & Compliance
Includes cargo barrier mounting points.
Includes child restraint anchor points.
Designed to improve cargo security during travel.
Built to MSA 4X4's high safety and quality standards.
What's Included
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
Complete Wing Kits
Cargo Barrier Mounting Points
Child Restraint Points
Compatible Accessories
Drawer Stacking Kit (40001)
Drawer Divider (EDDIV)
Left Power Panel (EPP-Left)
Left Pre-Cut Panel (SP0506)
Right Power Panel (EPP-Right)
Right Pre-Cut Panel (SP0507)
Large Battery Box (40018)
Slimline Battery Box (40019)
Explorer Storage Bag Bundle (20013)
Explorer Storage Bag Large (20012)
Explorer Storage Bag Medium (20011)
Explorer Storage Bag Small (20010)
Deluxe Coffee Kit Black (45042)
Deluxe Coffee Kit Cream (45043)
Vehicle Compatibility
FORD RANGER PX (2012-2022)
FORD RANGER PX2 (2015-2022)
FORD RANGER PX3 (2018-2022)
MAZDA BT-50 UP (2011-2020)
MAZDA BT-50 UR (2018-2020)
Dimensions
External Dimensions
Length: 1365mm (including handle lock)
Height: 275mm
Width per Drawer: 530mm (excluding wings)
Internal Drawer Dimensions
Internal Length: 1250mm
Internal Width: 453mm
Drawer Height: 211mm
Usable Height: 215mm
Specifications
Product Code: E1350-BT50-COM
Product Type: Double Storage Drawer System
Weight: 112.4kg
Important Information
Designed to mount directly to the vehicle tub body.
Not compatible with factory or aftermarket tub liners.
Tub liners must be removed prior to installation.
Warranty
Covered by the renowned MSA 4X4 Lifetime Guarantee for long-term confidence and reliability.
DIRECTION-PLUS Preline-Plus + Catch Can Kit Next-Gen Ford Ranger /...
$836.10
$929.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong!
UPDATE: Fuel Filter bracket released in November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches)
The Direction-Plus™ PreLine-Plus Pre-filter + Provent Ultimate Catch Can Kit (PLPV672DPC) is designed and engineered in Australia to suit:
Ford Next-Gen Ranger & Everest (YN2S 2.0L 4cyl) 2022- On
VW Amarok NF – (DXK 2.0L 4cyl) 2023-On
Excludes Aventura, Panamericana & Style due to different battery tray
HOW DOES IT WORK?
PRELINE-PLUS PRE-FILTER
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year.
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems.
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT:
Remote multi-stage water alert system (visual and audible)
100% water separation efficiency (based on 150μm droplet size)
98% particle separation (based on 30 micron particles)
Reliable protection from corrosion and abrasion
No need to visually check for water – included alarm
Simple spin on style filter'
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
*Only in installations where the oil is returned to the sump
Check fitment guide below to confirm suitability for your vehicle.
HSP Tail Lock Ford Ranger/Raptor Next Gen Dual & Space...
$249.00
The HSP TailGate Lock offers peace of mind by ensuring that your tailgate locks automatically when your vehicle does. This innovative product synchronizes seamlessly with your existing vehicle remote, providing enhanced security and convenience.
Works with Factory Remote
Unlike other units on the market, the TailGate Lock by HSP fully integrates with your existing factory key and runs in sync with your vehicle’s pre-programmed key functionality. This also includes working with proximity sensors, door handles and automatic timed lock functions.
Enhanced Security
The electronic TailGate Lock by HSP is one of the best ways to keep your tools safe.
Did you know that most canopies simply ‘lip’ over the tailgate? Meaning that if your tailgate is unlocked it would be very easy for someone to force your tailgate open.
No Drill + Plug and Play Installation
Got a spare 45 minutes? Perfect!
The TailGate Lock is so easy to install that it should take 45 minutes to install. The unique system is plug and play and does not require any drilling.
Why HSP?
Proudly made in Australia, the Roll R Cover Series 3.5 is the only fully Australian-manufactured roll top. Built in custom facilities in Country Victoria, it supports local jobs and the economy. The units are designed and tested locally, ensuring top-notch quality and reliability. HSP is also 100% Australian owned!
Features
Easy 45-minute installation
Unique plug-and-play system
No drilling required
Fully integrates with your existing factory key
Syncs with vehicle’s pre-programmed key functions
Compatible with proximity sensors, door handles, and automatic timed lock functions
Keeps your tools and cargo safe
Prevents easy forced entry by securing the tailgate, which many canopies simply 'lip' over
Benefits
Automatically locks and unlocks with your vehicle remote, streamlining your security process.
No need for professional help—install it yourself in just 45 minutes without drilling.
Reduces the risk of theft by ensuring your tailgate is always locked when your vehicle is.
Specifications
Compliant to ISO9001
100,000 switching cycles
Operating Temperature: -40°C to 80°C
Vibration Resistance: 2.7g
Current consumption (blocking current): 6.7A
Idling current: 350mA
Voltage range: 9-15V (rated 12V)
MSA 4X4 Power Fold Towing Mirrors -Ford Ranger 2012-May 2022...
$1,485.00
$1,650.00
MSA 4X4 TM651 -Ford Ranger 2012-May 2022 Chrome, Electric, Heated, Indicators, Powerfold
FEATURES• Power fold at the touch of a button• Four different mirror positions• Large, single mirror lens• Adjustable viewing angles• Vertical and horizontal adjustment• Unique pivot design• Fold inwards or outwards• ADR Compliant• Injection moulded and die-castaluminium components
5 Year Warranty
MSA Ford Everest Towing Mirrors (Black Electric Indicators) 2015-Current -...
$837.90
$931.00
FORD EVEREST - TOWING MIRRORS (BLACK ELECTRIC INDICATORS) 2015-CURRENT Year: 2015-CURRENT Model: FORD EVEREST / Black / Electric / Indicators
FEATURES:
Can be adjusted to suit the viewing angle and preferences of any driver. Vertical and horizontal adjustment caters to drivers of differing height and seated positions
Simple to fit. MSA 4X4’s Towing Mirrors mount onto your vehicle door in the same position as your existing mirrors
Large, single mirror allows you to see your caravan/trailer sides without being confusing for everyday driving
Slightly curved glass for even more vision, but not too curved that its distracting
Unique pivot design allows the mirrors to maintain normal everyday position dimensions, whilst allowing for easy further extension
Designed for towing caravans, camper trailers, trailers, boats and horse floats
Available to suit a growing range of tray backs and towing vehicles
Included: 1 x Left-hand side mirror 1 x Right-hand side mirror 1 x Installation instructions
SPECIFICATIONS: Weight: 14 kg Freight Dimensions: 54 × 53 × 31 cm
DIRECTION-PLUS Transchill Transmission Cooler Kit Ford Ranger, Everest Pxiii Bi-Turbo...
$704.70
$783.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Preline-Plus + Catch Can Kit Next-Gen Ford Ranger /...
$779.40
$866.00
BUNDLE & SAVE!!
Protect your diesel engine with Direction-Plus™ PreLine-Plus Pre-Filter + Provent Ultimate Catch Can Kit. This is the Ultimate Defence against water contamination, costly injector failure, carbon build-up and reduced performance. Our PreLine-Plus offers up 100% water separation efficiency* and our Provent Catch Can offers up to a massive 98% oil separation efficiency. With this dual kit you can‘t go wrong!
UPDATE: Version 2 bracket released November 2023 now compatible for Touring & Premium Pack options with Auxilliary 6 switch pack (overhead switches)
The Direction-Plus™ PreLine-Plus Pre-filter + Provent Ultimate Catch Can Kit (PLPV671DPC) is designed and engineered in Australia to suit:
Ford Next-Gen Ranger & Everest (BF2S 3.0L 6cyl) 2022- On
Compatible with Dual Battery Systems
VW Amarok Core & Life NF – (DXWA 3.0L 6cyl) 2023-On
Excludes Aventura, Panamericana & Style due to different battery tray
HOW DOES IT WORK?
PRELINE-PLUS PRE-FILTER
PreLine-Plus system provides protection for all modern diesel high-pressure injection systems, reliably protecting the fuel system from corrosion, abrasion and the frequency of repairs reduced. For the first line of defence against water and particle contamination, investing in a Direction-Plus™ PreLine-Plus system will protect your investment 24 hours a day, 365 days a year.
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems.
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
BENEFITS OF FITTING A PRELINE-PLUS PRE-FILTER KIT:
Remote multi-stage water alert system (visual and audible)
100% water separation efficiency (based on 150μm droplet size)
98% particle separation (based on 30 micron particles)
Reliable protection from corrosion and abrasion
No need to visually check for water – included alarm
Simple spin on style filter'
PROVENT ULTIMATE CATCH CAN
Direction-Plus ProVent Ultimate Catch Can kit protects the diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
The problem is compounded by modern engines fitted with exhaust gas recirculation systems (EGR) whereby a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the exhaust particles are collected by the oil. This combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance and/or failure.
HOW IT WORKS
Direction-Plus ProVent Ultimate Catch Can system separates and redirects oil and air from blow-by gas produced from within the crankcase, which also provides the option of returning the oil back to the sump. By not fitting a Direction-Plus ProVent Ultimate Catch Can system in your vehicle it is likely that your engine will experience a progressive reduction in performance.
BENEFITS OF FITTING A PROVENT ULTIMATE CATCH CAN KIT:
Prevents oil and soot contamination entering the clean air intake
Excellent protection for turbocharger
Minimises oil consumption*
Prevents oil buildup in intercoolers
Regulates crankcase pressure
Keeps critical engine components clean
Reduces exhaust smoke and odours
98% oil separation efficiency
Saves you money
*Only in installations where the oil is returned to the sump
Check fitment guide below to confirm suitability for your vehicle.
FRONT RUNNER Ford F-150 6.5' Bed (2009-Current) Pro Bed System...
$1,305.00
$1,450.00
Massively improve your Ford F150’s cargo-carrying capabilities with the easy-access Pro Bed Rack System. It easily secures to the top of the load bed and frees up space in the load bed. Use the Pro Bed Rack-specific accessories, such as the Molle Panel and Recovery Device Mount, to customize your ride.
This Pro Bed System is specifically designed to fit the Ford F-150 6.5 load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headboard Molle Panel, Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Ford F-150 6.5 with specific mounting brackets bolted to the existing factory mounting points.
Made of a combination of steel and aluminium, sealed in the same durable and corrosion resistant black powder-coating as Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net
PBFF004S - Ford F-150 6.5' Bed (2009-Current) Pro Bed System
Consisting of:1x PBAL1755 - Pro Bed Rack Aluminium Extrusions X- Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 53kg (116.84lbs)Installed height from load bed ledge:520mm/ 20.47”
Shipping Dimensions:Width: 640mm (25")Length: 1820mm (72")Height: 380mm (15")
Shipping Weight:Weight: 53kg (117lbs)
POLYAIR Ultimate Series Airbag Kit Ford Territory - 19696ULT
$430.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.Symptoms such as:- Suspension bottoming out- Rough ride- Excessive sway & body roll- Unpredictable braking characteristics- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:- Air adjustable from 5-60psi !- Tough molded polyurethane construction- Easy to install using common tools- Easy to follow, illustrated instructions- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Ford - Territory 2004 - 2016, 2WD & 4WD
POLYAIR Standard Ultimate Airbag Kit, Ford Everest - 95099ULT
$480.00
POLYAIR ULTIMATE AIRBAG SUSPENSION KIT (2" RAISED) FITS FORD EVEREST NEXT GEN 2022-ON (95099ULT)PART NO95099ULTBRANDPOLYAIRDESCRIPTIONTHE POLYAIR ULTIMATE SERIES LOAD ASSIST AIRBAG KITS ARE SPECIFICALLY DESIGNED TO SUIT COIL SPRUNG VEHICLES.The ULTIMATE SERIES UNIQUE DESIGN ALLOWS FOR A HUGE 60PSI OF PRESSURE FOR THOSE SERIOUSLY HEAVY LOADS!
WHEN YOU LOAD UP THE BACK OF THE VEHICLE OR HOOK UP A CARAVAN OR TRAILER, YOU’LL NOTICE THE REAR END DROP DOWN; THIS DROP CAN HAVE SOME ADVERSE EFFECTS ON YOUR VEHICE'S SAFETY AND HANDLING.SYMPTOMS SUCH AS:
- SUSPENSION BOTTOMING OUT- ROUGH RIDE- EXCESSIVE SWAY & BODY ROLL- UNPREDICTABLE BRAKING CHARACTERISTICS- POOR HEADIGHT AIMALL THIS CAN BE MITIGATED BY SIMPLY INSTALLING A SET OF POLYAIR ULTIMATE SERIES!THE AIRBAG KIT IS AIR ADJUSTABLE, GIVING YOU FLEXIBILITY TO TAILOR THE LEVEL OF SUPPORT FOR YOUR INDIVIDUAL LOAD TYPES AND WEIGHTS.IN THIS DAYAND AGE, WE ARE ALL EXPECTING MORE OUT OF OUR SUV’S AND 4WD’S AND AS A RESULT THEY ARE TOWING AND CARRYING MORE AND MORE. POLYAIR SPRING HAVE ACKNOWLEDGED THIS TREND AND HAVE PROVIDED A SOLUTION WITH THE ‘POLYAIR ULTIMATE SERIES’THE ULTIMATE SERIES SIGNIFICANT 60PSI PRESSURE RATING ALOWS YOU TO TAKE ON THE TOUGH LOADS, WHETHER YOU ARE HIGHWAY TOURING OR TRAVELLING OFF THE BEATEN TRACK. THE POLYAIR ULTIMATES ARE THE MOST ADVANCED POLYURETHANE AIRBAG ON THE MARKET AND WILL PROVIDE YOUR VEHICLE WITH A NEW LEVEL OF SUPPORT!
FEATURES:- AIR ADJUSTABE 5-60PSI !- TOUGH MOLDED POLYURETHANE CONSTRUCTION- EASY TO INSTALL COMMON TOOLS- EASY TO FOLLOW, ILLUSTRATED INSTRUCTIONS- QUICK CONNECTING, EASY TO USE AIR FITTINGS.
FRONT RUNNER Ford Transit (L3H2/148In Wb/Medium Roof) (2013-Current) Slimpro Van...
$2,087.10
$2,319.00
Compatible with Ford Transit L3/H2 / 148"WB medium roof vans with a vehicle length of 5981mm / 235.5".
Load-carrying area: 2974mm (117.1") x 1470mm (57.9").
Eight (8) Mounting Feet secure into van's existing factory mounting points.
Compatible with most Front Runner accessories.
Slats can be configured to any spacing to accommodate roof AC, vents, or any other accessories.
Fitment guide and all mounting hardware are included. No drilling or modification required.
All Front Runner racks are backed by a limited lifetime warranty.*
Features
KVFT003T - Ford Transit (L3H2/148" WB/Medium Roof) (2013-Current) Slimpro Van Rack Kit - by Front Runner
Consisting of:
4x FAVF003 - Ford Transit Van Rack Foot Set
1x RRAC207 - Van Rack Joiner Kit
2x RRAC208 - Van Rack Side Profile End Caps
4x RRNS1425 - Narrow Slat / 1425mm (Pair)
1x SPVT002 - Van Rack Side Profile / 1358mm
1x SPVT003 - Van Rack Side Profile / 1560mm
1x WDST013 - Wind Deflector Van Rack 30mm Lip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Assembled Rack Kit Dimensions:
2974mm (117.1") L x 1470mm (57.9") W x 123mm (4.8") H
Approximate Installed Weight: 34.45kg (75.95lbs)
Ford Transit Van Rack Kit heights are 125mm from the bottom of the roof ditch to the top of the slat. (Z brackets can not be inverted) all measurements are taken from bottom of roof ditch to top of the rack slat.The slat T slots and side profiles take standard M8 hex bolts top and bottom.
Shipping Dimensions:
Width: 300mm (12")
Length: 1805mm (71")
Height: 195mm (8")
Shipping Weight:
Weight: 37.35kg (82lbs)
Clearview Black Original Towing Mirrors Ford Territory Electric
$751.50
$835.00
CLEARVIEW Original Towing Mirrors for Ford Territory
Enhance your towing experience with the Clearview Original Towing Mirrors,
specifically designed for the Ford Territory. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring electric mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle
Factory-Style Design – A refined, OEM-style mirror appearance
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Black
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Territory
Specifications
Mirror Type: Original Towing Mirrors
Adjustment: Electric
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CV-FD-TY-EB
Why Choose Original Towing Mirrors?
Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
VSS Bonnet Solar Panel - Ford Super Duty F350 (2005...
$860.00
Introducing the VSS System for the Ford Super Duty F350 (2005 – 2007), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
140w (2 x 70W) of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
140W
Maximum Power Voltage (Vmp)
42V
Open Circuit Voltage (Voc)
46V
Maximum Power Current (Imp)
6.66A
Short Circuit Current (Isc)
7.34A
VSS Bonnet Solar Panel - Ford F-150 Raptor (2018-Current) 70-Watt
$775.00
Introducing the VSS System for the Ford F-150 Raptor (2018 – Present), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
70W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 2 Hours
Installation Difficulty - ModerateBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
70W
Maximum Power Voltage (Vmp)
17V
Open Circuit Voltage (Voc)
20V
Maximum Power Current (Imp)
4.11A
Short Circuit Current (Isc)
4.52A
VSS Bonnet Solar Panel - Ford F-150 (2015 – 2020)...
$705.00
Introducing the VSS System for the Ford F-150 (2015 – 2020), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
90W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
90W
Maximum Power Voltage (Vmp)
17V
Open Circuit Voltage (Voc)
20V
Maximum Power Current (Imp)
5.3A
Short Circuit Current (Isc)
5.8A
VSS Bonnet Solar Panel - Ford Super Duty F250, F350,...
$705.00
Introducing the VSS System for the Ford Super Duty F250, F350, F450, F550 (2011 – 2016), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
95W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
95W
Maximum Power Voltage (Vmp)
18.5V
Open Circuit Voltage (Voc)
22V
Maximum Power Current (Imp)
5.13A
Short Circuit Current (Isc)
5.64A
VSS Bonnet Solar Panel - Ford Super Duty F250, F350,...
$655.00
Introducing the VSS System for the Ford Super Duty F250, F350, F450, F550 (2017 – 2021), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
65W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
65W
Maximum Power Voltage (Vmp)
18.5V
Open Circuit Voltage (Voc)
22V
Maximum Power Current (Imp)
3.5A
Short Circuit Current (Isc)
3.8A
VSS Bonnet Solar Panel - Ford Ranger (2011-2015) 100-Watts
$705.00
Introducing the VSS System for the Ford Ranger (2006 - 2011), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
100W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
100W
Maximum Power Voltage (Vmp)
21V
Open Circuit Voltage (Voc)
24V
Maximum Power Current (Imp)
4.76A
Short Circuit Current (Isc)
5.23A
VSS Bonnet Solar Panel - Ford Ranger T6 (2015 -...
$1,085.00
Introducing the VSS System for the Ford Ranger (2015 - 2022), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
115W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 2.5 Hours
Installation Difficulty - Moderate Benefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
115W (35W + 45W + 35W)
Maximum Power Voltage (Vmp)
17V
Open Circuit Voltage (Voc)
21V
Maximum Power Current (Imp)
6.76A
Short Circuit Current (Isc)
7.44A
VSS Bonnet Solar Panel - Ford Everest (2015-2022) 115-Watts
$1,085.00
Introducing the VSS System for the Ford Everest 2015 to 2022, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
115W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 2.5 Hours
Installation Difficulty - ModerateBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
115W (35W + 45W + 35W)
Maximum Power Voltage (Vmp)
17V
Open Circuit Voltage (Voc)
21V
Maximum Power Current (Imp)
6.76A
Short Circuit Current (Isc)
7.44A
VSS Bonnet Solar Panel - Ford Ranger Next Generation (2022-Current)...
$655.00
Introducing the VSS System for the Ford Ranger Next Generation (2022-Current) 75-Watts, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
100W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
75W
Maximum Power Voltage (Vmp)
22V
Open Circuit Voltage (Voc)
26V
Maximum Power Current (Imp)
3.4A
Short Circuit Current (Isc)
3.75A
VSS Bonnet Solar Panel - Ford Everest Next Generation (2022-Current)...
$655.00
**New Stock Coming Soon**
Please contact us for ETA
Introducing the VSS System for the Next Generation Ford Everest (2022 - current), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
75W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
75W
Maximum Power Voltage (Vmp)
22V
Open Circuit Voltage (Voc)
26V
Maximum Power Current (Imp)
3.4A
Short Circuit Current (Isc)
3.75A
VSS Bonnet Solar Panel - Ford Maverick (1987-1997) 110-Watt (2...
$810.00
Introducing the VSS System for the Ford Maverick 1987-1997, the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
110W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 2 Hours
Installation Difficulty - ModerateBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
110W
Maximum Power Voltage (Vmp)
20.5V
Open Circuit Voltage (Voc)
24.2V
Maximum Power Current (Imp)
5.36A
Short Circuit Current (Isc)
5.9
VSS Bonnet Solar Panel - Ford F-150 Platinum (2023-Current) 100-Watt
$705.00
Introducing the VSS System for the Ford F-150 Platinum (2023 to current), the World’s First Vehicle Specific Bonnet-Mounted Solar Panel System.
Key Features:
100W of clean solar energy to keep your battery topped up when the engine isn't running.
Rugged “Marine-Grade” construction to withstand extreme environmental conditions.
Perfect for overlanding, camping, and the jobsite. Keep your drinks cold and equipment charged without killing your battery.
Solar Made Simple: An optional solar controller makes for everything you need for a clean and simple install.
3-year warranty.
Approximate Installation Time - 1.5 Hours
Installation Difficulty - EasyBenefits– Keep your vehicles battery topped up at all times: Perfect for the overlander or camper who wants to power devices without worrying about draining their battery. Perfect on the jobsite for work lights and charging cordless tools.
– Extend the life of your battery: The VSS System will give you longer overall battery life by tending it constantly during periods of sun exposure.
– Emergency engine starting device: If you ever manage to completely drain your battery the VSS will start the vehicle up again in as little as 30 minutes depending on sun exposure.
– Anti-glare device: Due to it’s light absorbing properties the solar panel creates a surface with very low reflectivity across the bonnet of the vehicle.DescriptionThe VSS System hard-mounts to the bonnet of your vehicle, and during daylight hours, provides a constant flow of clean solar energy to your primary or secondary vehicle batteries. This gives you the ability to run 12V accessories like fridges, phone/laptop chargers, lights, power inverters etc. without the need to start your engine and without the fear of draining your battery and leaving you stranded. The VSS system is completely plug-and-play if paired with our optional MPPT solar charge controller and can be installed in as little as 1.5 hours.
We chose the most stable and durable multilayers semi-flexible solar panel construction available to ensure that these solar panels can withstand extreme environmental conditions, maintenance-free, for years.
The Future of Vehicle Charging is Here!FAQsWill Engine Heat Affect the VSS System?
This is the most commonly asked question about our VSS System. It is a fact that solar cells lose efficiency as they warm up, however the simple answer is NO, engine heat will not have an effect on how the VSS system operates.
Why you ask? Well, the main benefit of the VSS system is that it provides power to your vehicle battery when the engine is NOT running (and therefore not not). When the engine is running (and hot) the vehicle’s alternator is doing the majority of the charging and not the solar panel. This means there is very little effect from the additional heat on the system when the system is used for its intended benefits.
In order to help with the heat build-up, each VSS panel is prepped with closed cell neoprene on the back of the panel. This serves two purposes; it lifts the panel up off of the bonnet creating an air packet between the panel and the bonnet allowing for cooling, while also helping to protect the vehicle bonnet from any contact with the back of the panel.
Will the VSS System work with my battery?
The MPPT charge controller included in our complete kits are programmed to charge a wide variety of battery types. Our system will work with AGM, Lead-Acid and Gel Cell Type Batteries.
*we do not recommend the use of Optima Batteries with the VSS system.
Can it be removed?
Once installed the VSS system is not designated to be removed from the vehicle. The solar panel can be removed only if absolutely necessary. i.e., the panel needs to be replaced.Features
Power
100W
Maximum Power Voltage (Vmp)
20V
Open Circuit Voltage (Voc)
20V
Maximum Power Current (Imp)
5A
Short Circuit Current (Isc)
5.23A
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
