FRONT RUNNER Ford Bronco (1966-1977) Slimline Ii Roof Rack Kit...
$2,172.60
$2,414.00
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
This 1964mm/77.3" long, full-size, Slimline II cargo carrying roof rack kit for your Ford Bronco contains Slimline II Tray and Wind Deflector, as well as 8 Gutter Mount Legs for mounting the Tray to the vehicle. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:
4 x LASS103 - No 3 Leg 155mm (Pair) - by Front Runner1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 34kg (74lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 455mm (18")Length 1610mm (63")Height 250mm (10")
Shipping Weight:
Weight 39.1kg (86.0lbs)
FRONT RUNNER Ford Bronco 2 Door (2022-Current) Slimline Ii Roof...
$2,306.70
$2,563.00
Introducing our tough Slimline II Cargo Roof Rack Kit: an 85.3" Slimline II Tray, Wind Deflector, and 4 Foot Rails for precision mounting. Our sturdy racks will allow you to adventure confidently in your iconic Ford Bronco.
This 2166mm/85.3” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector and a set of four (4) Foot Rails to mount the Slimline II Tray.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails have openings for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allow access to Tables that mount under the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB004 - Ford Bronco 2 Door (2022-Curr) Foot Rails1x RRSTD11 - SLII Tray - 1255mm(W)X2166mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 39.26kg (86.55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")
Shipping Weight:Weight: 46kg (101lbs)
FRONT RUNNER Ford Bronco 4 Door W/Hard Top (2021-Current) Slimline...
$2,478.60
$2,754.00
Turn your Ford Bronco 4 Door into the ultimate adventure truck with this Slimline II Roof Rack Kit. This highly versatile and durable rack was designed specifically for the four-door with a hard top. It boasts a unique modular design that allows you to customize it with a range of purpose-built accessories to suit your load-hauling, travel and adventure-sports lifestyle.
This 2570mm/101” long, full-size Slimline II Cargo Roof Rack kit contains the Slimline II Tray, Wind Deflector, front Foot Rails that fit to the factory accessory mounting points on the top of the windshield frame and the rear rails that clamp on using the rear factory clamp points to mount the Slimline II Tray.
No drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle-specific foot rails allow for storing compatible gear under the rack, such as Front Runner tables.
Foot Rails allows the fitment of a Table that mounts under the rear of the rack (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a limited lifetime warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFB002 - Ford Bronco 4D w/Hard Top (2021-Curr) Foot Rails1x RRSTD13 - SLII Tray - 1255mm(W)X2570mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 45.78kg (100.93lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 290mm (11")Shipping Weight:Weight: 51kg (112lbs)
FRONT RUNNER Ford Dc (2012-2022) Slimline Ii Roof Rack Kit...
$1,373.40
$1,526.00
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
This 1156mm/45.5" long full-size Slimline II cargo carrying roof rack kit for the Ford DC contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FASS024 - Foot Set / 50mm - 60mm1x FASS014 - Foot Set - Angled / 65mm1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 25.11kg (55.36lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 28.43kg (63lbs)
FRONT RUNNER Ford Everest (2015-2021) Slimline Ii Roof Rack Kit...
$1,871.10
$2,079.00
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
This 1762mm/69.4” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFE001 - Ford Everest (2015-2021) Foot Rails1x RRSTD09 - SLII Tray - 1255mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 37.47kg (82.61lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 37.6kg (83lbs)
FRONT RUNNER Ford Everest (2022-Current) Slimline Ii Roof Rack Kit...
$2,048.40
$2,276.00
This Slimline II roof rack kit certainly readies your Ford Everest for any adventure on any terrain. Did you know that the Slimline II Rack Kit for the Ford Everest U704 is Ford-approved? The sizeable Slimline II Tray will greatly increase your cargo and sports gear-carrying capabilities, so there are no excuses for leaving behind your camp, overland, or sports gear
This 1964mm/77.3” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford Everest. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:1x FAFE002 - Ford Everest (2022-Current) Foot Rails1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 38.8kg (85.53lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 260mm (10")Shipping Weight:Weight: 43.17kg (95lbs)
FRONT RUNNER Ford Excursion (2000-2005) Slimline Ii Roof Rack Kit...
$1,756.80
$1,952.00
Turn your Ford Excursion into the ultimate cargo carrier with this 1762mm/69.4" long Slimline II Roof Rack kit. With 55+ available rack accessories, your Ford can now easily carry your camping, overland or sports gear. No adventure is off limits once you transform your Ford with this space-saving rack kit.
This 1762mm/69.4" long, Slimline II cargo carrying roof rack kit for the Ford Excursion contains the Slimline II Tray, Wind Deflector and 6 Feet. Installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x FASS024 - Foot Set / 50mm - 60mm1x FASS025 - Foot Set / 70mm - 80mm1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)1x WDST007 - Wind Deflector 45mm Lip Pair/1255mm(W)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.53kg (62.9lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 36kg (79lbs)
FRONT RUNNER Ford F-150 5.5' (2009-Current) Roll Top Slimline Ii...
$2,072.70
$2,303.00
Haul more with this full-size, tough-as-nails Ford F-150 5.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 5.5' truck bed and contains the Slimline II tray (1575mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov\
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)
FRONT RUNNER Ford F-150 6.5' (2009-Current) Slimline Ii Load Bed...
$2,399.40
$2,666.00
Haul more with this full-size, tough-as-nails Ford F-150 6.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 truck bed and contains the Slimline II tray (1575mm x 1762mm) and 6 Pickup Truck Bed Universal Legs that fit into the supplied Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTP09 - SLII Tray - 1575mm(W)X1762mm(L)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 39.44kg (86.95lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1730mm (68")Height: 245mm (10")Shipping Weight:Weight: 33.8kg (74lbs)
FRONT RUNNER Ford F-150 6.5' (2015-Current) Roll Top Slimline Ii...
$1,892.70
$2,103.00
This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails.
This kit creates a full-size rack that sits above your Ford F-150’s (2015 +) 6.5' load bed with roll top. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1560mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing roll top rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS027 - Leg Spacer 6mm (Pair)3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTM08 - SLII Tray - 1475mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.58kg (63.01lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 455mm (18")Length: 1730mm (68")Height: 265mm (10")Shipping Weight:Weight: 37.9kg (83lbs)
FRONT RUNNER Ford F-150 Crew Cab (2009-Current) Pro Bed Rack...
$2,817.90
$3,131.00
Get ready to massively up the gear-carrying capacity in the load bed area of your Ford F-150 with our Pro Bed Rack Kit. Includes a Slimline II Roof Rack and Pro Bed System that is secured to the bed of your Ford. Attach various Pro Bed accessories to the Pro Bed System, while all our 55 + available other rack accessories can go on the Slimline II—no more excuses for leaving any gear behind.
This Pro Bed Rack Kit is specifically designed to fit the Ford F-150 Crew Cab load bed.
Included in this Kit is the a 1425mm/56.1" x 1560mm/61.4" Slimline II Rack and Pro Bed System.
The Pro Bed Rack Kit provides the freedom to customize your Load Bed storage configuration.
The Slimline II Rack allows all the top, side and under rack mounted adventure gear accessories.
The Pro Bed System secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket,Twin Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount freeing up space on the Slimline II rack and in the bed of your truck.
Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment.
The Pro Bed System has integrated fixing points for more accessories such as the Pro Bed Tailgate Net.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:3x FASS025 - Foot Set / 70mm - 80mm1x PBFF001S - Ford F-150 Crew Cab (2009-Current) Pro Bed System3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 76.38kg (168.39lbs)
Shipping Dimensions:Width: 650mm (26")Length: 1720mm (68")Height: 480mm (19")
Shipping Weight:Weight: 80kg (176lbs)
FRONT RUNNER Ford F-150 Crew Cab (2009-Current) Slimline Ii Roof...
$1,817.10
$2,019.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation.
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.NOTE: Moon roof tilt function not operational with under rack table fitment.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FAFF004 - Ford F-150 Super Crew (2009-Current) Foot Rails - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumhigh strength steel
Approximate Installed Weight 26kg (58lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (17.7")Length 1750mm (69")Height 300mm (11.8")
Shipping Weight:
Weight 34kg (75lbs)
FRONT RUNNER Ford F-150 Crew Cab (2009-Current) Slimline Ii Roof...
$1,799.10
$1,999.00
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required.
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Crew Cab. Drilling into the vehicle's roof is required.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 300mm (12")Shipping Weight:Weight: 33kg (73lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Light Bar Wind Fairing for the Ford F-150 Super Crew (2015-2020) Slimsport Roof Rack Kit / Lightbar ready
Allows installation of Front Runner 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Designed to direct airflow over the rack and accessories, reducing drag and wind noise
Helps reduce fuel consumption while carrying bulky loads
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain
Brackets and installation hardware included
Works with or without a sunroof
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford F150 Super Crew (2015-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Works with or without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack 40In...
$234.90
$261.00
Be lighter on fuel and add light to your Ford F-150 Crew Cab with this specially-designed wind fairing. The Slimsport Rack Wind Fairing channels air fluidly over your Slimsport Roof Rack (and the accessories loaded on it). This particular fairing is specifically designed to pair with the 40” Front Runner Light Bar because adventures don't end when the sunlight does.
Lightbar wind fairing for the Ford F-150 Super Crew (2021-Current) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 210mm (8.3") W x 119mm (4.7") H
Weight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab (2021-Current) Slimsport Rack Wind...
$234.90
$261.00
Reduce the drag and wind noise over the roof rack of your Ford F-150 Crew Cab with a wind fairing. The Slimsport Rack Wind Fairing adds a bold look while channeling air fluidly over your Slimsport Roof Rack (and the accessories loaded on it) to help reduce fuel consumption.
A wind fairing for the Ford Ranger T6 / Wildtrak / Raptor (2012-2022) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Works with or without a sunroof.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Ford F-150 Raptor (2009-Current) Slimline Ii Roof Rack...
$1,799.10
$1,999.00
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Ford F-150 Raptor. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FAFF001 - Ford F-150 Super Crew (2009-Curr) Foot Rails/Low1x RRSTJ08 - SLII Tray - 1425mm(W)X1560mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 33.81kg (74.54lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 310mm (12")Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Ford F-150 5.5' Super Crew (2009-Current) Double Load...
$818.10
$909.00
Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)
FRONT RUNNER Ford F-150 5.5' Super Crew (2009-Current) Triple Load...
$1,110.60
$1,234.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 5.5' Super Crew with these three low-profile, powder coated aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 5.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 235mm (9")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 13.6kg (30lbs)
FRONT RUNNER Ford F-150 6.5' Super Crew (2009-Current) Double Load...
$815.40
$906.00
Transport all your adventure gear safely over the bed of your Ford F-150 Super Crew with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Super Crew. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.27kg (27.05lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1630mm (64")Height: 160mm (6")Shipping Weight:Weight: 8.8kg (19lbs)
FRONT RUNNER Ford F-150 6.5' Super Crew (2009-Current) Triple Load...
$1,107.90
$1,231.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 6.5' Super Crew with these low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 6.5' Super Crew. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the supplied Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x TRAC003 - Universal Track / 1800mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 30.36kg (66.93lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 230mm (9")Shipping Weight:Weight: 13.2kg (29lbs)
FRONT RUNNER Ford F-150 Crew Cab (2009-Current) Pro Bed System...
$1,271.70
$1,413.00
This tough, lightweight steel and aluminum cargo system secures to the bed of your Ford F-150, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this great cargo system, your Ford F-150 can easily fulfill its gear-carrying duties on any adventure or road trip.
This Pro Bed System is specifically designed to fit the Ford F-150 Crew Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the bed of the Ford F-150 Crew Cab with specific mounting brackets. Drilling is required for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Consisting of:1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large1x PBFF001 - Ford F-150 Crew Cab Pro Bed Rack Mounting System1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.04kg (112.52lbs)
Shipping Dimensions:Width: 650mm (26")Length: 1450mm (57")Height: 480mm (19")
Shipping Weight:Weight: 52kg (114lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Double Load Bar...
$818.10
$909.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these two low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 12.02kg (26.5lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1580mm (62")Height: 275mm (11")Shipping Weight:Weight: 12.2kg (27lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Triple Load Bar...
$1,110.60
$1,234.00
Guarantee all your gear arrives safely without compromising precious cargo space in your Ford F-150 Raptor 5.5' with these three low-profile, corrosion-free aluminum Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 Raptor 5.5'. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK019 - Roof Load Bar Set 1575mm(W)1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 16.46kg (36.29lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 1685mm (66")Length: 165mm (6")Height: 355mm (14")Shipping Weight:Weight: 16.4kg (36lbs)
FRONT RUNNER Ford F-150 Retrax Xr 5'6In (2004-Current) Double Load...
$573.30
$637.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford F-150 when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRFF033 - Ford F-150 ReTrax XR 5'6" (2004-Current) Double Load Bar Kit - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 6.8kg (14.99lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 160mm (6"); Length: 1690mm (67"); Height: 155mm (6")
Shipping Weight:
Weight: 9kg (20lbs)
FRONT RUNNER Ford F-150 Raptor 5.5' (2009-Current) Slimline Ii Load...
$2,072.70
$2,303.00
Haul more with this full-size, tough-as-nails Ford F-150 Raptor 5.5' rack kit, which will free up your precious load bed cargo space.
This kit creates a full-size rack that sits above your Ford F-150 Raptor truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1575mm x 1358mm), 2 Tracks, and 6 Pickup Truck Bed Universal Legs that fit into the Tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRAC939 - Pickup Load Bed Bolt Kit / 30mm1x RRSTP07 - SLII Tray - 1575mm(W)X1358mm(L)1x TRBU003 - Pick-Up Load Bed Tracks / 1400mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 34.12kg (75.22lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 37kg (81lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack 40In...
$1,847.70
$2,053.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Suzuki Grand Vitara (2007-2014) contains Slimline II Tray, Wind Deflector, 2 Tracks and 6 Feet. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSV001T - Suzuki Grand Vitara (2007-2014) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
2 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
1 x TRSV001 - Suzuki Vitara Tracks / 1850mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 29kg (63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 33.3kg (73.3lbs)
FRONT RUNNER Ford F-150 Crew Cab (2015-2020) Slimsport Rack Wind...
$1,343.70
$1,493.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Suzuki Jimny. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRSJ002T - Suzuki Jimny (1998-2018) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FASJ002 - Suzuki Jimny Foot Rails - by Front Runner
1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)
DIRECTION-PLUS Fuel Manager Post-Filter Kit Ford Ranger / Everest Bi-Turbo...
$413.10
$459.00
Direction Plus™ Fuel Manager Post-Filter Kit (PF664DPK) is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022
Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022
Ford Ranger Raptor YN2S (2.0L 4cyl) 2018 – 2022
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Ford Next Gen...
$693.90
$771.00
The TransChill Arctic Black Transmission cooler kit TCB671DPK fits:
Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On
Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On
This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
DIRECTION-PLUS Fuel Manager Pre-Filter Kit Ford Ranger / Everest Bi-Turbo...
$418.50
$465.00
Direction Plus™ Fuel Manager Pre-Filter Kit FM664DPK is designed and engineered in Australia to suit Ford Everest and Ranger Bi-Turbo models, protecting its engine against costly injector failure.
This kit fits:
Ford Everest YNWS (2.0L 4cyl) 2018 – 2022Ford Ranger YNWS (2.0L 4cyl) 2019 – 2022PROTECT YOUR ENGINEIt’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Fuel Manager Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
HOW IT WORKSInstalling a Direction Plus™ Fuel Manager Pre-filter kit between the fuel tank and the O.E.M fuel filter, the Fuel Manager will remove the majority of water and particle contamination. This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a DirectionPlus™ Fuel Manager Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A FUEL MANAGER PRE-FILTER KIT:
Reduce wear & tear and avoid repair costs that can exceed $10,000
95% water separation and superior particle removal
Ability to separate emulsified water from ULSD
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even
when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Tr+ Throttle Controller Suits Ford And Mazda - TR0715DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Preline-Plusprovent Oil Kit Ford Pxiii Bi-Turbo - PLPV664DPK
$698.40
$776.00
The Direction-Plus™ PreLine-Plus / Provent Dual Kit PLPV664DPK is The Ultimate Defence against carbon build-up and water contamination. It fits Ford Everest and Raptor models.
The Dual Kit with our Preline-Plus offering up 100% water separation efficiency* and our ProVent withup to a massive 98% oil separation efficiency, including all parts needed you can‘t go wrong!
Protect your investment 24 hours a day, 365 days a year.
PROTECTION AGAINST WATER CONTAMINATION
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a 100% of water separation and 98% of particle pre-separation. The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market.
PROTECTION AGAINST OIL & SOOT CONTAMINATION
Direction-Plus™ ProVent® oil separator kit protects your modern diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system
DIRECTION-PLUS Preline Plus Pre-Filter Kit Ford Pxiii Bi Turbo -...
$434.70
$483.00
Direction-Plus™ PreLine-Plus PL664DPK is an innovative pre-filter system for diesel fuel which suits Ford Everest, Ranger, Raptor PXIII Bi Turbo models. PreLine-Plus pre-filter system is designed specifically to cope with extreme weather conditions and poor fuel quality ensuring a high degree of water separation and particle pre-separation.
WATER SEPARATION EFFICIENCY
With a 100% water separation efficiency rating (based on 300um droplet size) and a long service life, meeting the specifications set by leading manufacturers of diesel fuel injection systems, this PreLine-Plus pre-filter kit will reliably protect your fuel system from corrosion, abrasion and the frequency of repairs reduced.
WATER ALERT SYSTEM
The PreLine-Plus kit includes an intuitive multi-stage water alert that separates it from other kits on the market. The alarm will notify the driver in the event that water is detected in the fuel which also eliminates the need to manually check for water.
DIRECTION-PLUS Px Pl Kit For Ford Ranger - PL661DPK
$433.80
$482.00
Designed specifically to cope with extreme weather conditions and poor fuel quality, they are the perfect choice for drivers in Australia.
Direction-Plus™ PreLine-Plus is an innovative pre-filter system for diesel fuel systems which ensures a high degree of water separation and particle pre-separation.
The PreLine-Plus kits include an intuitive multi-stage water alert that separates it from other kits on the market. The PreLine-Plus system is tailored to the most modern diesel direct injection systems for diesel engines.
DIRECTION-PLUS 3.0L Ford Ranger & Mazda Bt50 - FM609DPK
$459.00
$510.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration, protectiing your diesel fuel system to the fullest.
DIRECTION-PLUS Dp 30 Kit For Mazda Bt50 & Ford Ranger...
$392.40
$436.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
Clearview Chrome Original Towing Mirrors Ford Ranger Px Oct 2011...
$1,264.50
$1,405.00
CLEARVIEW Original Towing Mirrors for Ford Ranger Px Oct 2011 - 2021
Enhance your towing experience with the Clearview Original Towing Mirrors,
specifically designed for the Ford Ranger Px Oct 2011 - 2021. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring power-fold function, indicators and electric mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Power-Fold Function – Folds the mirrors in and out electrically
Integrated Indicators – Improves visibility to other road users
Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle
Factory-Style Design – A refined, OEM-style mirror appearance
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Chrome
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Ranger Px Oct 2011 - 2021
Specifications
Mirror Type: Original Towing Mirrors
Adjustment: Electric
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CV-FR-PX-FIEC
Why Choose Original Towing Mirrors?
Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
Clearview Chrome Original Towing Mirrors Ford Everest 2015 - 2021...
$1,264.50
$1,405.00
CLEARVIEW Original Towing Mirrors for Ford Everest 2015 - 2021
Enhance your towing experience with the Clearview Original Towing Mirrors,
specifically designed for the Ford Everest 2015 - 2021. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring power-fold function, indicators and electric mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Power-Fold Function – Folds the mirrors in and out electrically
Integrated Indicators – Improves visibility to other road users
Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle
Factory-Style Design – A refined, OEM-style mirror appearance
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Chrome
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Everest 2015 - 2021
Specifications
Mirror Type: Original Towing Mirrors
Adjustment: Electric
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CV-FD-EV-FIEC
Why Choose Original Towing Mirrors?
Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
Clearview Chrome Original Towing Mirrors Ford Ranger Pj/Pk Dec 2006...
$751.50
$835.00
CLEARVIEW Original Towing Mirrors for Ford Ranger Pj/Pk Dec 2006 - Sep 2011
Enhance your towing experience with the Clearview Original Towing Mirrors,
specifically designed for the Ford Ranger Pj/Pk Dec 2006 - Sep 2011. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring manual mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Manual Mirror Adjustment – Mirror position is adjusted by hand
Factory-Style Design – A refined, OEM-style mirror appearance
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Chrome
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Ranger Pj/Pk Dec 2006 - Sep 2011
Specifications
Mirror Type: Original Towing Mirrors
Adjustment: Manual
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CV-FM-RB-MC
Why Choose Original Towing Mirrors?
Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
CLEARVIEW Chrome Original Towing Mirrors Indicators, Electric Ford Territory 2004-2018...
$841.50
$935.00
CLEARVIEW Original Towing Mirrors Indicators, Electric Ford Territory 2004-2018-CV-FD-TY-IEC
Mirror Features: Indicators, Electric
Finish: Chrome
Suits:Ford Territory 2004-2018
The Original Towing Mirrors from Clearview set the standard for towing safety and convenience. These extendable mirrors offer a larger reflective surface and extend 180mm to ensure you can see the full length of your vehicle and trailer. The Original mirrors are built tough| designed to withstand the harshest Australian conditions.
Features:
Large reflective surface for enhanced visibility
Extends 180mm for clear towing view
Tough| durable construction
Available in black| chrome| and raw finishes
ADR compliant and designed to fit a wide range of vehicle models
CLEARVIEW Chrome Original Towing Mirrors Indicators, Electric Ford Ranger Px...
$841.50
$935.00
CLEARVIEW Original Towing Mirrors Indicators, Electric Ford Ranger PX Oct 2011 - (MY21) 2021-CV-FD-RE-IEC
Mirror Features: Indicators, Electric
Finish: Chrome
Suits:Ford Ranger PX Oct 2011 - (MY21) 2021
The Original Towing Mirrors from Clearview set the standard for towing safety and convenience. These extendable mirrors offer a larger reflective surface and extend 180mm to ensure you can see the full length of your vehicle and trailer. The Original mirrors are built tough| designed to withstand the harshest Australian conditions.
Features:
Large reflective surface for enhanced visibility
Extends 180mm for clear towing view
Tough| durable construction
Available in black| chrome| and raw finishes
ADR compliant and designed to fit a wide range of vehicle models
CLEARVIEW Chrome Original Towing Mirrors Indicators, Electric Ford Ranger Pj/Pk...
$841.50
$935.00
CLEARVIEW Original Towing Mirrors Indicators, Electric Ford Ranger PJ/PK Dec 2006 - Sep 2011-CV-FM-RB-IEC
Mirror Features: Indicators, Electric
Finish: Chrome
Suits:Ford Ranger PJ/PK Dec 2006 - Sep 2011
The Original Towing Mirrors from Clearview set the standard for towing safety and convenience. These extendable mirrors offer a larger reflective surface and extend 180mm to ensure you can see the full length of your vehicle and trailer. The Original mirrors are built tough| designed to withstand the harshest Australian conditions.
Features:
Large reflective surface for enhanced visibility
Extends 180mm for clear towing view
Tough| durable construction
Available in black| chrome| and raw finishes
ADR compliant and designed to fit a wide range of vehicle models
CLEARVIEW Chrome Original Towing Mirrors Indicators, Electric Ford Everest 2015...
$841.50
$935.00
CLEARVIEW Original Towing Mirrors Indicators, Electric Ford Everest 2015 - (MY21) 2021-CV-FD-RE-IEC
Mirror Features: Indicators, Electric
Finish: Chrome
Suits:Ford Everest 2015 - (MY21) 2021
The Original Towing Mirrors from Clearview set the standard for towing safety and convenience. These extendable mirrors offer a larger reflective surface and extend 180mm to ensure you can see the full length of your vehicle and trailer. The Original mirrors are built tough| designed to withstand the harshest Australian conditions.
Features:
Large reflective surface for enhanced visibility
Extends 180mm for clear towing view
Tough| durable construction
Available in black| chrome| and raw finishes
ADR compliant and designed to fit a wide range of vehicle models
Clearview Chrome Original Towing Mirrors Ford Ranger Px Oct 2011...
$1,300.50
$1,445.00
CLEARVIEW Original Towing Mirrors for Ford Ranger Px Oct 2011 - 2021
Enhance your towing experience with the Clearview Original Towing Mirrors,
specifically designed for the Ford Ranger Px Oct 2011 - 2021. Built for modern vehicles,
these mirrors deliver superior visibility, advanced functionality, and a refined factory-style appearance.
Featuring heated mirror glass, power-fold function, indicators and electric mirror adjustment,
these mirrors help maintain clear rear vision when towing caravans, trailers, and heavy loads.
Key Features & Benefits
Heated Mirror Glass – Demists and defogs the mirror glass for clear vision
Power-Fold Function – Folds the mirrors in and out electrically
Integrated Indicators – Improves visibility to other road users
Electric Mirror Adjustment – Easily control mirror positioning from inside your vehicle
Factory-Style Design – A refined, OEM-style mirror appearance
Heavy-Duty Construction – Built for Australian towing and touring conditions
Available Finish – Chrome
Sold As A Pair – One left-hand and one right-hand mirror included
Vehicle Compatibility
Ford Ranger Px Oct 2011 - 2021
Specifications
Mirror Type: Original Towing Mirrors
Adjustment: Electric
Fitment: Direct replacement
Sold As: Pair (left and right mirrors)
Product Code: CV-FR-PX-HFIEC
Why Choose Original Towing Mirrors?
Clearview Original mirrors are designed to provide dependable towing visibility with a refined, factory-style appearance. Built with heavy-duty construction for Australian towing and touring conditions, they offer a direct, OEM-style replacement solution.
About Clearview Accessories
Clearview Accessories is an Australian brand specialising in towing mirrors and vehicle accessories designed to improve safety,
visibility, and functionality when towing and touring. Engineered for Australian conditions, Clearview products are widely used
by caravan owners, 4WD enthusiasts, and commercial operators requiring reliable towing solutions.
Towing mirrors are essential for maintaining clear rearward visibility when hauling caravans, trailers, and heavy loads.
Clearview mirrors are designed with a focus on strength, adjustability, and vehicle-specific fitment, ensuring stable vision
and improved driving confidence. With multiple mirror systems available, the brand provides solutions to suit different vehicle
types, styling preferences, and towing requirements.
Clearview products are trusted by touring drivers and towing users for their durability and practical design.
Key Product Range
Compact Towing Mirrors – A smaller, modern option for everyday driving with extendable functionality
Next Gen Towing Mirrors – Advanced mirrors with improved styling and integrated features
Classic Towing Mirrors – Traditional extendable mirrors built for heavy-duty towing
Mirror Accessories & Replacement Parts – Components for maintenance and upgrades
Towing & Vehicle Accessories – Additional products to enhance towing setups
Clearview Accessories delivers purpose-built towing mirror solutions engineered for safety, durability, and performance—
helping drivers maintain clear visibility and confidence when towing in all conditions.
CLEARVIEW Chrome Original Towing Mirrors Heat, Power-Fold, Indicators, Electric Ford...
$1,300.50
$1,445.00
CLEARVIEW Original Towing Mirrors Heat, Power-Fold, Indicators, Electric Ford Everest 2015 - (MY21) 2021-CV-FD-EV-HFIEC
Mirror Features: Heat, Power-Fold, Indicators, Electric
Finish: Chrome
Suits:Ford Everest 2015 - (MY21) 2021
The Original Towing Mirrors from Clearview set the standard for towing safety and convenience. These extendable mirrors offer a larger reflective surface and extend 180mm to ensure you can see the full length of your vehicle and trailer. The Original mirrors are built tough| designed to withstand the harshest Australian conditions.
Features:
Large reflective surface for enhanced visibility
Extends 180mm for clear towing view
Tough| durable construction
Available in black| chrome| and raw finishes
ADR compliant and designed to fit a wide range of vehicle models
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
