All 4WD Parts and Accessories

The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil. An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations. The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance. The two positions Hi-Contour control provides the ability to fine tune the system frequency response optimizing it according to the different speakers positions. Most of all, the listeners can achieve their favourite sound thanks to the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 125 Power Handling - Peak W 250 Impedance Ohm 3 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 93 Frequency Response Hz 45 ÷ 25k Crossover Cut off 3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Adjustment Tweeter-Level +2 / 0 / -2 dBHi-Contour ON/OFF Weight of one component - Woofer 1.20 (2.65) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82)

The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 110 Power Handling - Peak W 220 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 132 Re Ohm 3,1 Fs Hz 70 Le mH 0,3 Vas I 9,5 Mms g 14,9 Cms mm/N 0,36 BL T*m 5,5 Qts 0,58 Qes 0,67 Qms 4,6 Spl dB 93

The three way MPK 163.3 car audio speakers system is dedicated to those who want the best: the MP 70.3 midrange featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.

The MPK 130.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 130.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 130.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.. Component System Size mm (in.) 130 (5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 91 Frequency Response Hz 60 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0.95 (2.09) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 110 Re Ohm 3,1 Fs Hz 90 Le mH 0,25 Vas I 3 Mms g 10,5 Cms mm/N 0,24 BL T*m 5,3 Qts 0,64 Qes 0,74 Qms 5,1 Spl dB 92

The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven. Component Crossover Adjustment Tweeter   0 / +2 dB Weight of one component - Crossover kg (lb) 0,16 (0.35) Crossover Midrange   Low pass 5,5 kHz @ – 6 dB Oct.Tweeter      Hi pass 5,5k Hz @ – 12 dB Oct. Physical Specs G 102 mm 4.02 in. H 76,5 mm 3.01 in. I 37 mm 1.46 in.   Features 1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.

he Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 25k Crossover Cut off 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.29 (2.84) Weight of one component - Tweeter kg (lb) 0,1 (0.22) Weight of one component - Crossover kg (lb) 0,57 (1.26) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,24 Vas I 8,3 Mms g 17,5 Cms mm/N 0,3 BL T*m 7 Qts 0,47 Qes 0,52 Qms 5,3 Spl dB 93

The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range.  The ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the ML 280.3 Legend’s and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring.  Like MLCX 2 TW.3, also the MLCX 165.3 crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the cross-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 91 Frequency Response Hz 40 ÷ 25k Crossover Cut off 3.5 kHz - 12 dB Oct Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1,65 (3.64) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,37 Vas I 9 Mms g 17 Cms mm/N 0,3 BL T*m 6 Qts 0,57 Qes 0,64 Qms 5,4 Spl dB 92

component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers 5-1/4" treated paper woofer with polyurethane surround 15/16" PEI dome tweeter with external crossover handles up to 60 watts RMS (120 watts peak power) frequency range: 60-23,000 Hz sensitivity: 93 dB woofer mounting depth: 2-3/16" impedance: 4 ohms grilles not included warranty: 2 years MFR # DSK 130.3 Item # 301DSK1303 General Speaker Size 5 1/4 Driver Design 2-way Woofer Design Cone Woofer Material Pressed Paper (Water-Repellent) Woofer Surround Polyurethane Midrange Design --- Midrange Material --- Tweeter Design 24mm Dome Tweeter Material PEI Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included No Parts Warranty 2 Years Labor Warranty 2 Years Specifications Sensitivity (1W at 1 meter) 93 Sensitivity at 2.83 volts N/A Frequency Response 60 - 23k Hz Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 4 1/2 Mounting Height (Inches) 0.192 Frame Width 5.114 Frame Length 5.114

The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design.  Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 105 Power Handling - Peak W 315 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92,5 Frequency Response Hz 45 ÷ 22,5k Crossover Cut off 2,8 kHz @ 12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0,2 (0.44) D mm 131,5 Re Ohm 3,3 Fs Hz 60 Le mH 0,3 Vas I 11,5 Mms g 15,4 Cms mm/N 0,44 BL T*m 5,45 Qts 0,57 Qes 0,66 Qms 4,3 Spl dB 92,5

Two-way system Cento CK 165 features the new C 26 tweeter with a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil, delivering detailed and natural reproduction of medium-high frequencies. The R&D team optimized the C 26 dispersion characteristics to maximize performance at the listening point, ensuring a natural and progressive roll-off with excellent frequency linearity. Extensive research led to the selection of SPP-M (Semi Pressed Paper-Mica) for the C 165 woofer cone, preserving the natural sound of paper while enhancing rigidity through Mica powder. 165 mm (6.5 in.) | System | 285 W | 4 Ohm The result is an excellent balance between lightness and damping for powerful, controlled sound. The oversized ferrite magnet ensures superior control even at higher excursions. The ultra-compact CCX 2 crossover includes tweeter level control (0 / +3 dB) and uses selected components for a full and engaging sound. CG 165 grilles are included, made from high-resistance ABS with metal mesh, offering excellent protection and a refined in-car appearance. Technical Specs Component System Size mm (in.) 165 (6.5) Power Handling – Continuous W 95 Power Handling – Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 93 Frequency Response Hz 55 – 22.5k Crossover Cut-off 2.5 kHz @ 12 dB/Oct Crossover Type 2-Way Passive Crossover Woofer Weight kg (lb) 0.96 (2.12) Tweeter Weight kg (lb) 0.03 (0.07) Crossover Weight kg (lb) 0.185 (0.41) Electro-Acoustic Specs D mm 131.5 Re Ohm 3.2 Fs Hz 60 Le mH 0.2 Vas l 13.24 Mms g 13.9 Cms mm/N 0.51 BL T·m 4.9 Qts 0.59 Qes 0.69 Qms 3.9 SPL dB 93   Accessories CPG 165 GRILE- Provided High resistance ABS metal finish grille and removable metallic mesh supplied   Technologies SPP-M (Semi Pressed Paper-Mica) cone enhanced with Mica powder for an excellent balance between lightness and damping.   Features C 26:  1. Soft Tetolon® fiber 26 mm (1 in.) dome and 20 mm (0.8 in.) voice coil, for a natural and yet detailed reproduction of musical nuances. 2. Neodymium magnet with high-density magnetic flux, optimized for maximum control during high-energy dynamic transients in the mid-high frequency range. 3. Faceplate geometry optimized with FEM (Finite Element Modeling) technique for a linear frequency response in off-axis installations. 4. Wide range of accessories, for easy integration in OEM placements. C 165:  1. 165 mm (6.5 in.) semi-pressed paper cone SPP-M (Semi Pressed Paper- Mica) enhanced with Mica powder for an excellent balance between lightness and damping. 2. High-density flux ferrite magnet combined with low-carbon polar plates for reduced distortion at high power levels. 3. 25 mm (1 in.) voice coil featuring an aluminum former to guarantee high excursion and power handling. 4. Compact and transparent three-spoke basket acoustically combined with a rubber magnet cover for total damping of spurious vibrations. 5. Provided elegant grille made with high-resistance ABS plastic structure with a metallic finish combined with a protective metal mesh. CCX 2:  1. Tweeter level adjustment through a three-position switch (0, +3 dB) for an optimal tone balance that can be customized by the user. 2. Low-loss factor capacitors and low resistance inductances made with pure copper, for maximum sound transparency and clear high frequencies. 3. Compact design with metallic finish for an easy installation, with air vents for efficient heat dissipation.

Upgrade your vehicle's front channels and discover a whole new world of audio with the impressive IS MBZ 100 v2 kit. It showcases cutting-edge Flax cone midrange drivers and aluminium inverted dome tweeters. The advanced Focal technology ensures crystal-clear highs and superior spatialization, resulting in an unbelievably natural sound experience. The kit was specifically engineered to seamlessly replace the original system in the newest Mercedes-Benz models. Key points Developed in France Dedicated kit for latest-generation Mercedes-Benz vehicles Quick and easy installation, without any alterations Invisible integration in the passenger compartment Plug & Play manufacturer connectors dedicated to the vehicle   Specifications Product type : 2-way separate kit Loudspeakers :Midrange: 4" Membrane :Flax Coil diameter : 1'' Medium : 4" Filter : Woofer: Online / Tweeter box: Online Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 100 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 50 W RMS Sensitivity : 87 dB Surround material : Butyl

Made in France | Premium Plug & Play Upgrade Take your latest-generation Mercedes-Benz to a new level of audio performance with the Focal IC MBZ 100 V2. This high-fidelity 2-way coaxial speaker kit is part of the renowned Focal Inside range, designed specifically for seamless installation in compatible Mercedes models — with no modifications required. Crafted and engineered in France, the IC MBZ 100 V2 features Flax cone technology to deliver natural, detailed sound reproduction with warm midrange and precise highs. Powered by a neodymium motor, the compact design ensures enhanced efficiency and clarity, even in limited spaces. Key Features Developed and manufactured in France for superior build quality Plug & Play compatibility – quick, easy installation with OEM connectors Vehicle-specific design – perfectly fits late-model Mercedes-Benz vehicles High-performance Flax cone – delivers natural sound and dynamic response Compact neodymium motor – provides powerful output in a slim form factor ️ Invisible integration – blends seamlessly with your car’s interior Upgrade your factory system effortlessly with Focal’s IC MBZ 100 V2, and rediscover your favourite music with clarity, precision, and true French acoustic craftsmanship.   Specification Product type : 2-way coaxial kit Loudspeakers :Midrange: 4" Membrane :Flax Coil diameter : 1'' Medium : 4'' Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 88 dB Surround material : Butyl  

Bring powerful, precise bass to your Mercedes-Benz® with the ISUB MBZ 2 RHD V2 subwoofer kit from Focal. Designed specifically for right-hand drive vehicles, this Plug & Play solution delivers deep, controlled low-frequency response while maintaining seamless OEM integration. Engineered and developed in France, the ISUB MBZ 2 RHD V2 combines compact design with a high-performance neodymium motor to ensure outstanding dynamics without compromising space. Installation is fast and straightforward, requiring no vehicle modifications, and the result is a dramatic improvement in clarity, punch, and overall sound balance throughout your cabin. Key Points Right-hand drive dedicated design – Developed in France for perfect compatibility with Mercedes-Benz vehicles Powerful and controlled bass – Deep, impactful sound reproduction with impressive precision Plug & Play integration – Vehicle-specific connectors for a fast, clean installation No modifications required – Maintains factory look and integrity of your vehicle Compact neodymium motor – Delivers high performance in a small footprint Advanced protection – Ensures durability and reliability over time   Specifications Product type : right-hand drive subwoofers kit Loudspeakers :Subwoofer 8" Membrane :Polyglass Coil diameter : 1.38" Frequency response (+/- 3dB) :35Hz - 200Hz Impedance : 2 Ω Maximum power : 150 watts x2 Motor : Neodymium Nominal Impedance : 2 Ω Sensitivity : 93 dB Surround material : Butyl Design Depth behind surface (Mounting depth) : 99.5 mm Accessories Grilles : Included Plug & Play ISO cables supplied : Yes Grilles Yes

Performance Meets Precision in Compact Form The 3 KM is a specialised 3-inch (80 mm) mid-range driver built for serious car audio systems that demand clarity and fidelity in tight installation spaces. As part of the K2 Power M series, it brings Focal’s premium acoustic technologies into a compact format Key Features & Specifications Aramid fibre K2 sandwich cone with M-profile – improved frequency response, better dispersion and reduced depth Patented TMD® (Tuned Mass Damper) surround – lowered distortion and improved cone stability. Rigid aluminium non-magnetic frame – high mechanical integrity. Nominal power: ~60 W RMS, peak ~120 W (various sources). Sensitivity: ~89 dB (2.83 V/1 m) with 4 Ω impedance. Frequency response: approx. 200 Hz–9 kHz (as a dedicated mid-range driver). Mounting depth: approx. 27.3 mm / 1-1/8″. 4 Ω nominal impedance Why Use It? If you’re building a custom high-fidelity car audio system, the 3 KM allows precise mid-range reproduction with high accuracy. Its compact size makes it suitable for limited spaces while maintaining premium acoustic performance. The use of the “M” profile cone ensures better dispersion and reduced installation depth — ideal for demanding installs. Installation & System Considerations Because this is a dedicated mid-range driver, you’ll need appropriate crossover filters (often active crossovers) to ensure proper integration with tweeters and woofers. Its compact depth (~27 mm) allows for flush or near-flush mounting in constrained spaces. Should be paired with other components from the K2 Power M line to maintain tonal match and performance (e.g., 6.5 KM woofer, FRAK tweeter). Ensure your amplifier and system power levels align with the RMS/peak specs to avoid under- or over-driving. Summary The Focal 3 KM mid-range driver brings audiophile-grade mid-range clarity into a compact form, leveraging top-tier technologies like the K2 sandwich cone, TMD surround, and M-profile design. If you’re seeking to elevate your car audio build with precision and performance — this is a strong choice.   Sound Acoustics Product type : Medium Loudspeakers : Medium: 3.14″ Membrane : Aluminum/magnesium with “m” profile Suspension technology : Tuned Mass Damper Medium : 3″ Filter : Integrated Frequency response (+/- 3dB) : 200Hz – 9kHz Maximum power : 120 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 60 W RMS Sensivity : 89 dB Sound Electronics RMS power : 60 W RMS Design Product Depth: 27.3 Cut-Out diameter : 80 mm Weight : 200 g Accessories Supplied with screws and mounting brackets Grilles Available

Pure Dynamics. Unrivalled Precision. The Focal 6.5 KM 6½″ (165 mm) woofer from the K2 Power M Series brings uncompromising performance, combining raw power, absolute control, and musical precision.Built in Focal’s French workshops, this high-end driver is engineered for enthusiasts demanding the very best in clarity, tonal balance, and dynamic expression. Like all K2 Power M components, the 6.5 KM uses Focal’s iconic aramid fibre K2 sandwich cone, enhanced with the exclusive ‘M’-profile geometry for superior dispersion and reduced mounting depth. The result is an ultra-compact, high-efficiency driver that delivers authentic, full-bodied sound in virtually any installation. K2 Technology – Precision That Performs The K2 cone is a Focal signature: an aramid-fibre composite built for unmatched rigidity and low mass.By adding the ‘M’-profile, Focal’s engineers have refined frequency response and dispersion while minimising distortion — giving your music a tighter, faster, and more accurate attack. Every detail of the 6.5 KM is designed to serve one purpose: pure, high-fidelity energy that feels as alive as it sounds. Patented TMD® Surround – Zero Distortion Originally developed for Focal’s Sopra home hi-fi series, the TMD® (Tuned Mass Damper) surround eliminates unwanted cone resonances and mechanical colouration.By stabilising the surround and suppressing deformation, the 6.5 KM achieves ultra-clean midrange detail with extraordinary linearity — even at high volumes. Progressive Spider – Dynamic Control Focal’s progressive-profile spider enhances cone control and damping, allowing for greater excursion without losing composure.This advanced suspension system ensures impeccable dynamics, transient precision, and bass authority across the entire frequency range. Modular Freedom – Your System, Your Way The K2 Power M range is designed “à la carte”, giving installers and enthusiasts the flexibility to build a truly bespoke system.Pair the 6.5 KM with the 3 KM midrange and FRAK tweeter to create an extraordinary 3-way configuration, or run it as a dedicated mid-bass driver for uncompromising accuracy. Key Features Made in France – designed and built in Focal’s acoustic labs 6½″ (165 mm) woofer – premium K2 Power M mid-bass driver Aramid fibre K2 sandwich cone – ultra-rigid, lightweight, dynamic ‘M’-profile cone – superior dispersion and reduced mounting depth Patented TMD® surround – eliminates resonance and distortion Progressive spider – improved damping and linearity Aluminium chassis – rigid, non-magnetic structure for high excursion Compact form factor – ideal for tight factory locations or custom installs Bespoke system ready – integrate seamlessly with 3 KM and FRAK drivers The K2 Legacy Lives On The Focal 6.5 KM continues the K2 Power legacy — engineering mastery, handcrafted precision, and sound that moves you.Every detail is tuned for realism, delivering the emotion, energy, and excellence that define Focal’s performance heritage. Focal 6.5 KM – Dynamic Power. Absolute Fidelity.   Sound Acoustics Product type : Woofer Loudspeakers : Woofer: 6.5″ Membrane : K2 Power Suspension technology : Tuned Mass Damper Filter : Integrated Frequency response (+/- 3dB) : 50Hz – 5kHz Maximum power : 240 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 120 W RMS Sensivity : 92.5 dB Sound Electronics RMS power : 120 W RMS Design Product Depth: 54 mm Cut-Out diameter : 165 mm Weight : 1950 g Grilles Available

IS BMW 100KL is a 2-way component kit designed for BMW drivers looking to upgrade their factory audio system with a high-fidelity solution tailored to their vehicle. It features Focal’s iconic K2 Sandwich cone, which offers an ideal balance of weight, rigidity, and damping — delivering powerful, dynamic sound reproduction. The kit also includes TKM inverted dome “M” tweeters, capable of reproducing high frequencies up to 22 kHz, ensuring exceptional precision and smoothness in the treble range. A premium solution for an immersive and detailed in-car listening experience. Specifications Product type : 2-way separate kit Loudspeakers :Woofer / Midrange / Subwoofer: 3.94" Membrane :Kevlar sandwich Tweeter :100mm Filter : Separated Frequency response (+/- 3dB) :80Hz - 22kHz Impedance : 4 Ω Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 84 dB Surround material : Butyl   Sound Electronics RMS power : 60 W RMS Design Depth behind surface (Mounting depth) : 41 mm Accessories Supplied with screws and mounting brackets : Yes Grilles No

Specially designed for Model 3 and Model Y from the manufacturer Tesla®, the IC T3Y 100 coaxial kit is a reference hi-fi solution that can be integrated quickly and easily and does not require modification within the vehicle. The speakers are equipped with the Flax sandwich membrane, made of linen fiber and manufactured in France. This exclusive Focal technology delivers pure, natural and ultra-realistic sound. The aluminum inverted dome tweeter allows faithful reproduction of high frequencies, while offering improved sound spatialization. And for even greater performance in a limited depth space, the IC T3Y 100 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system   Specifications Product type : 2-way coaxial kit Loudspeakers :Medium: 4" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 80 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 40 W RMS Sensitivity : 88 dB Surround material : Butyl

Specially designed for Model 3 and Model Y vehicles from the manufacturer Tesla®, the IW T3Y 200 woofers are aimed at drivers wishing to replace their original audio system with a hi-fi solution from Focal and perfectly suited to their vehicle. Integrating quickly and easily, IW T3Y 200 significantly improves the in-car listening experience. Designed and manufactured in France, the speakers are equipped with a Flax sandwich membrane in flax fiber. Recognized for its performance, this Focal technology contributes to the reproduction of pure, natural and ultra-realistic sound. And for even greater sound performance in vehicles, the IW T3Y 200 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system Specifications Product type : Kit 2 Woofers Loudspeakers :Woofer: 8" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :40Hz - 1500Hz Maximum power : 150 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 75 W RMS Sensitivity : 91 dB Surround material : Butyl

An exclusive Focal innovation, the FRAK tweeter is a revolution in Car Audio with its unique power handling (600 Hz - 32 kHz). Its Aluminum/Magnesium cone with “M” profile brings unprecedented dynamics to your installation. Perfection of the treble and great clarity of the midrange combine for very high-end listening. Specifications Product type : Tweeter Loudspeakers :Tweeter: 1.25 Membrane :Aluminum/magnesium with "m" profile Surround technology : Tuned Mass Damper Coil diameter : 1.25" Filter : Integrated Frequency response (+/- 3dB) :600Hz - 32kHz Maximum power : 150 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 25 W RMS Sensitivity : 91 dB

Specially designed for Model 3 and Model Y vehicles from the manufacturer Tesla®, the IS T3Y 100 2-way exploded kit is aimed at drivers wishing to replace their original audio system with a hi-fi solution from Focal. It is integrated quickly and easily, without any modifications having to be made within the vehicle. IS T3Y 100 consists of Flax sandwich membrane speakers, made of linen fiber and manufactured in France. Recognized for its high quality, this Focal technology is the source of pure, natural and ultra-realistic sound. Another exclusive Focal innovation, the aluminum inverted dome tweeter allows faithful reproduction of highs, while offering sound spatialization optimized for confined spaces. And for even greater sound performance in vehicles, the IS T3Y 100 kit includes a neodymium motor. Key points Designed and manufactured in France Tesla® Model 3 and Model Y compatible High-fidelity sound at its best Quick and easy installation, no vehicle modifications required Composite structure, lightweight and unobtrusive Perfect, invisible integration in the cabin 100% Plug & Play system Specifications Product type : 2-way separate kit Loudspeakers :Medium: 4" Membrane :Flax Coil diameter : 1" Medium : 4" Filter : Integrated Frequency response (+/- 3dB) :150Hz - 20kHz Maximum power : 100 watts Motor : Neodymium Nominal Impedance : 4 Ω Nominal power : 50 W RMS Sensitivity : 87 dB Surround material : Butyl