Car Amplifiers and Audio Power Systems

HMD1 mono amplifier is the perfect solution to add one or more marine subwoofer to your vassel, being the ideal power extension of HMD8 DSP. At 1 Ohms it is stable and can supply up to 1000 W of power with extremely compact dimension.  General Specs Channels 1 POWER SUPPLY Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A Operating power supply voltage 6.5 ÷ 17 VDC Idling current 1.3 A Idling current off 0.05 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power 50 A Remote IN 6.5 ÷ 15 VDC (1 mA) ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC AMPLIFIER STAGE Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.1% Damping factor @ 1 kHz, 4Ω, 2 VRMS 140 Bandwidth @ -1.5 dB 10 Hz ÷ 500 Hz S/N ratio (A weighted @ 1 V Input) Master Input 110 dBA Input sensitivity Pre-In Selectable: 0.6 - 2.0 - 6.0 VRMS Input sensitivity Speaker-In Selectable: 2.0 - 6.5 - 20 VRMS Minimum load impedance 1Ω Adjustable Crossovers yes Output Power 1Ch @ 4Ω 500 W 1Ch @ 2Ω 800 W 1Ch @ 1Ω 1000 W Total Power 1000 W INPUTS / FILTERS Pre-In Inputs RCA Speaker-In Inputs Wired Physical Specs Max size W x H x D (mm/inch) 243 x 48 x 1599.56 x 1.8 x 6.25 Weight (kg/lbs) 1,98 (4.36

Venezia V4 is the most-powerful four-channel Hertz marine amplifier ever, featuring 160 W x 4 (4Ω) and 580 W x 2 (4Ω)! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V4 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V4 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.   Channels 4 - 3 - 2 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1.6A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 48 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,06% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 102 dBA Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10kΩ Load impedance (MIN)@4Ch:@3Ch:@2Ch: 2 Ω2 Ω + 2 Ω + 4 Ω4 Ω Adjustable Crossovers yes OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 4Ch 160 W x 4 (4Ω) 4Ch 290 W x 4 (2Ω) 3Ch 160 W x 2 (4Ω) + 580 W x 1 (4Ω) 3Ch 290 W x 2 (2Ω) + 580 W x 1 (4Ω) 2Ch 580 W x 2 (4Ω) Total Power 1160 W lnputs: PRE IN Pre Out Full range A Ch: A Ch. MONO (on/off): Yes By-pass: Yes (Full) Hi-Pass : 50 ÷ 4k Hz @ 12dB/Oct Lo-Pass: 50 ÷ 4k Hz @ 12dB/Oct B Ch: Yes B Ch. MONO (on/off): Yes By-pass: Yes (Full) Hi-Pass: 50 ÷ 4k Hz @ 12dB/Oct Lo-Pass: 50 ÷ 4k Hz 12@ dB/Oct Bass boost 50 Hz (adjust): (0 ÷ 12) dB mm in A 270 10.63 B 240 9.45 C 185 7.28 D 155 6.10 E 54 2.12 Weight kg lb 2.66 5.77

HCP 1MDK mono marine amplifierfeatures latest generation D-Class 2Ω stable output stage reaching the impressive RMS power of 740 W x 1 (4 Ω). Engineered and tested for the real environment of application (UV, salt-fog, vibrations, high/low temperature, thermal shock, dust), HCP 1MDK features a compact design built from extruded aluminium heatsink with top side ensuring effective heat transfer. The special balanced input circuitry reject electro-magnetic disturbances and the Hi-Level and lo-level inputs are compatible with any source. The Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB adds more punch to subwoofer and SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. The continuously adjustable PHASE control (0 to 180°) optimizes alignment of woofer bass frequencies with sub ones. The Optional Remote Volume Control (HRC) provides the ability to adjust subwoofer volume level from the dashboard. General Specs Channels 1 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 3 x 30 A Idling current (power ON/OFF) 0.8 A / 1 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 45 A Remote In: 7 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off with Speaker-In AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4 Ω): 0.25% Bandwidth: 10 ÷ 500 Hz S/N Ratio (A weighted @ 1 V): 100 dB Damping factor (100 Hz @ 4 Ω): > 100 Pre-In sensitivity: 0.2 ÷ 5 VRMS Speaker-In sensitivity: 0.8 ÷ 20 VRMS Load impedance (MIN) @ 1 Ch: 2 Ω Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97 Weight (kg / lb.): 3 / 6,61 Adjustable Crossovers yes Output Power Output Power (RMS) @ 14.4 VDC, THD 1% 1 Ch: 600 W x 1 (4 Ω) 1 Ch: 1100 W x 1 (2 Ω) Output Power (RMS) @ 14.4 VDC, THD 10%: 1 Ch: 740 W x 1 (4 Ω) 1 Ch: 1240 W x 1 (2 Ω) CEA 2006-A Ratings: RMS Power (4 Ω, ≤1 %THD + N, 14.4 V): 600 W x 1 Ch S/N Ratio (ref. 1 W output): 80 dBA Total Power 1240 W INPUTS / FILTERS INPUTS: PRE IN / SPEAKER IN Pre out Hi-Pass: 50 ÷ 250 Hz @ 12 dB/Oct. Filters FULL: Yes Lo-Pass: 50 ÷ 250 Hz @ 24 dB/Oct. SUBSONIC (on/off): 25 Hz @ 24 dB/Oct. BOOST 50 Hz (adjust): (0 ÷ 6) dB PHASE(adjust): (0 ÷ 180) deg Remote Volume Control (adjust): (-50 ÷ 6) dB Physical Specs mm in A 315 12.40 B 291 11.45 C 190 7.48 D 166 6.53 E 50 1.97

Venezia V1 is the most-powerful mono Hertz marine amplifier ever, featuring 1260 W @ 1Ω stable! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation. Venezia V1 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V1 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. General Specs Channels 1 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1 A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 52A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,02% Bandwidth: 10 ÷ 500 Hz S/N Ratlo (A welghted @ 1 V): 102 dB Damping factor (100Hz @ 4Ω) 500 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10kΩ Load impedance (MIN) 1 Ω Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 1Ch 700 W (4Ω) 1Ch 1260 W (2Ω) 1Ch 1260 W (1Ω) Total Power 1260 W INPUTS / FILTERS lnputs: PRE IN Pre Out: Hi-Pass filter 50 ÷ 250 Hz @ 12 dB/Oct Filters: Yes By-pass Yes (Full) Lo-Pass: 50 ÷ 500 Hz @ 24 dB/Oct Phase (adjust): (0 ÷ 180°) Subsonic: 25 Hz @ 24dB/Oct. Bass boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 270 10.63 B 240 9.45 C 185 7.28 D 155 6.10 E 54 2.12 Weight (kg/lb): kg lb 2.72 5.99

Venezia V5 is the most-powerful five-channel Hertz marine amplifier ever, featuring 130 W x 4 (4Ω) plus 490 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting... General Specs Channels 5 - 3 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1.8 A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 70 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distortion - THD (100Hz @ 4Ω): <0,05% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 102 dB Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@5Ch:@3Ch: 2Ω4Ω + 4Ω + 2Ω Weight (kg/lb): 3.72 / 8.2 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 5Ch 130 W x 4 (4Ω) + 490 x 1 (4Ω) 5Ch 220 W x 4 (2Ω) + 820 W x 1 (2Ω) 3Ch 440 W x 2 (4Ω) + 490 W x 1 (4Ω) 3Ch 440 W x 2 (4Ω) + 820 W x 1 (2Ω) Total Power 1700 W INPUTS / FILTERS lnputs: A Ch. Pre inB Ch. Pre inSub Ch. Pre in Pre Out: No A Ch. filters: Yes By-Pass Yes Hi-Pass : 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct B Ch. filters: By-pass: Yes Hi-Pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-Pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Sub Ch. filters: By-pass: No Low-Pass: 50 ÷ 250 Hz @ 24 dB/Oct Phase (adjust°): (0 ÷ 180°) Subsonic: 25 Hz @ 24 dB/Oct Boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 330 13 B 300 11.8 C 200 7.87 D 170 6.7 E 54 2.12 kg lb Weight: 3.72 8.2

Venezia V6 is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. Channels 6 - 5 - 4 - 3 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1.8 A / 0.04 mA Consumption@ 2Ω, 14.4 VDC (Max Musical Power): 75 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,06% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 100 dB Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@6Ch:@5Ch:@4Ch:@3Ch: 2Ω2Ω + 2Ω + 2Ω +2Ω + 4Ω2Ω + 2Ω +4Ω + 4Ω4Ω Adjustable Crossovers yes OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 6Ch 160 W x 6 (4Ω) 6Ch 290 W x 6 (2Ω) 5Ch 160 x 4 (4Ω) + 580 x 1 (4Ω) 5Ch 290 x 4 (2Ω) + 580 x 1 (4Ω) 4Ch 160 x 2 (4Ω) + 580 x 2 (4Ω) 4Ch 290 x 2 (2Ω) + 580 x 2 (4Ω) 3Ch 580 x 3 (4Ω) Total Power 1740 W lnputs: A Ch. Pre inB Ch. Pre inC Ch. Pre in Pre Out: No Ch. A filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. B filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. C filters: MONO IN (on-off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Lo-pass: 50 ÷ 500 Hz @ 12 dB/Oct mm in A 330 13 B 300 11.18 C 200 7.87 D 170 6.7 E 54 2.12 kg lb Weight: 3.72 8.2

HCP 2 MX  marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. General Specs Channels 2 - 1 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A ldling current (power ON/OFF): 0.6 A / 0.4 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 20 A Remote In: 7 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-OniOff with Speaker-ln AMPLIFIER STAGE Distorsion - TliD (100Hz @ 4Ω): 0.03% Bandwidth: 10 ÷ 65 kHz S/N Ratlo (A welghted @ 1 V): 105 dB Damping factor (100Hz @ 4Ω) 300 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Speaker-ln sensitivity: 0.8 ÷ 20 VRMS Load impedance (MIN)@2Ch:@1Ch: 2 Ω4 Ω Max size (mm/in): 315 x 190 x 50 / 12.40 x 7.48 x 1.97 Weight (kg/lb): 2.57 / 5.66 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 2Ch 100 W x 2 (4Ω) 2Ch 160 W x 2 (2Ω) 1Ch 320 W x 1 (4Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10% 2Ch 120 W x 2 (4Ω) 2Ch 200 W x 2 (2Ω) 1Ch 400 W x 1 (4Ω) CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): 100 W x 2 Ch S/N Ratio (ref. 1 W output) 83 dBA Total Power 800 W INPUTS / FILTERS lnputs: PRE IN/ SPEAKER IN Pre-out FULL Yes Hi-Pass: 50 ÷ 3200 Hz @ 12 dB/Oct Lo-Pass 50 ÷ 3200 Hz @ 12 dB/Oct Filters FULL Yes Hi-Pass: 50 ÷ 3200 Hz @ 12 dB/Oct Lo-Pass 50 ÷ 3200 Hz @ 12 dB/Oct Mono (On/Off) Yes Boost 50 Hz (select) (0 / 3 / 6) dB Physical Specs mm in A 315 12.40 B 291 11.45 C 190 7.48 D 166 6.53 E 50 1.97

Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency. The powerful mono Hertzaudio car amplifier ML Power 1 (1000 W – stable at 1 Ω) is perfect to drive the Mille subwoofers.  The filters combination adopted for the Mille Power line is extremely flexible and ensures they can be used in any configuration. The active crossovers of MLPower 1 feature a 24 dB/Oct. adjustable slope Lo-Pass filter to adapt to every need. The control section, protected by a removable panel, can be accessed from the top for an effortless tuning. Channels 1 Power supply voltage: 11÷15 VDC Idling current: 2 A Idling current when off: 0.04 mA Consumption @ 1Ω, 14.4 VDC(Max Musical Power) 83.5 A Distorsion - THD (100 Hz @ 4Ω): 0.08 % Bandwidth (-3 dB): 18 ÷ 500 Hz S/N Ratio (A weighted @ 1 V) 105 dB Damping factor (100 Hz @ 4Ω): 100 Pre-In sensitivity: 0.2 ÷ 5 V RMS Pre-In impedance: 15 kΩ Speaker-In sensitivity: 0.8 ÷ 20 V RMS Speaker-In impedance: 470 Ω Load impedance:1 Ch 4 ÷ 1Ω Remote In: 4 ÷ 15 VDC - 1 mA ART™: Automatic Remote Turn-On/Off with Speaker-In Fuse: 3 x 40 A Max size (mm/inches): 170 x 349 x 46.70 / 6.69 x 13.74 x 1.84 Weight (kg/lb): 3.09 / 6.81 Adjustable Crossovers yes CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % THD+N, 14.4 V): 600 W x 1Ch S/N Ratio (ref. 1 W output): 83,5 dBA OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 1 Ch 600 W x 1 (4Ω) 1 Ch 1000 W x 1 (2Ω) 1 Ch 1000 W x 1 (1Ω) Total Power 1000 W Inputs: Pre IN / Speaker IN Outputs: Pre OUT Filters: Lo-pass 50 ÷ 500 Hz @ 24 dB/Oct Phase: (continuous adjustment) 0 ÷ 180° Subsonic: Hi-pass 18 ÷ 40 Hz @ 24 dB/Oct. Remote SUB Volume: (-50 ÷ 6) dB mm in A 349 13.74 B 332 13.07 C 170 6.69 D 148 5.83 E 46,7 1.84i

Mille power amplifiers are born to fully enhance the outstanding performance of the Mille speakers. The new ADC (ADVANCED D-CLASS TECHNOLOGY) ensures pure listening pleasure while keeping a compact size with unmatched power efficiency. The heat sink, engineered with double technology, extrusion and aluminium die-casting, enables the Mille Power amplifiers to work constantly at full power without ever overheating, further maximizing thermal efficiency.  The ultra-versatile Hertzaudio car amplifier ML Power 5 (100 W x 4 + 550 W 2 Ω) provides the ability to drive a Mille system including the subwoofer. The HRC BM (Hertz Remote Control Bass Management), low frequencies level remote control, is optional. Channels 5 - 3 Power supply voltage: 11÷15 VDC Idling current: 3 A Idling current when off: 0.04 mA Consumption @ 2Ω, 14.4 VDC(Max Musical Power) 50 A Distorsion - THD (100 Hz @ 4Ω): 0.08 % Bandwidth A & B Ch (-3 dB): 5 ÷ 50k Hz Bandwidth C Ch (-3 dB): 5 ÷ 500 Hz S/N Ratio A & B Ch (A weighted @ 1 V) 100 dB S/N Ratio C Ch (A weighted @ 1 V): 106 dB Damping factor A & B Ch (100 Hz @ 4Ω): 50 Damping factor C Ch (100 Hz @ 4Ω): 90 Pre-In sensitivity: 0.2 ÷ 5 V RMS Pre-In impedance: 15 kΩ Speaker-In sensitivity: 0.8 ÷ 20 V RMS Speaker-In impedance: 470 Ω Load impedance:5 Ch3 Ch 4 x 2Ω + 1 x 2Ω2 x 4Ω + 1 x 2Ω Remote In: 4 ÷ 15 VDC - 1 mA ART™: Automatic Remote Turn-On/Off with Speaker-In Fuse: 2 x 40 A Max size (mm/inches): 170 x 349 x 46.70 / 6.69 x 13.74 x 1.84 Weight (kg/lb): Adjustable Crossovers yes CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % THD+N, 14.4 V): 60 W x 4 Ch + 310 W x 1 Ch S/N Ratio (ref. 1 W output): 60 W Channel: 80 dBA310 W Channel: 84 dBA OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 5 Ch5 Ch3 Ch3 Ch 70 W x 4 + 380 W x 1 (4Ω)100 W x 4 + 550 W x 1 (2Ω)200 W x 2 (4Ω) + 380 W x 1 (4Ω)200 W x 2 (4Ω) + 550 W x 1 (2Ω) Total Power 950 W INPUTS / FILTERS Inputs: Pre IN / Speaker IN A Ch filters: Full / Hi-Pass / Band-Pass 40 ÷ 150 Hz (HI) 80 ÷ 3.3k Hz (LO) @ 12 dB/Oct. B Ch filters: Full / Hi-Pass 80 ÷ 3.3k Hz @ 12 dB/Oct. C Ch filters: Lo-Pass 50 ÷ 500 Hz @ 24 dB/Oct. Remote SUB volume: (-50 ÷ 6) dB mm in A 349 13.74 B 332 13.07 C 170 6.69 D 148 5.83 E 46,7 1.84

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 1D amplifiers is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. The level of HMP 1 D amplifiers can be remote controlled with the included HRC BM (Hertz Remote Control Bass Management). Connected to the Remote Control plug, this provides extremely precise volume level from the comfort of your seat. General Specs Channels 1 Power Supply Power supply voltage / fuse: 11÷15 VDC / 1 x 15 A Idling current (power ON/OFF): 1 A / 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART : Automatic Remote Turn-On/Off Amplifier Stage Distortion - THD (100 Hz @ 4Ω): 0.1 % Bandwidth: 10 ÷ 500 Hz S/N Ratio (A weighted @ 1 V): 105 dB Damping factor (100 Hz @ 4Ω): 300 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN) @ 2 Ch: 2Ω Max size (mm/in.): 223 x 100.5 x 43.6 / 8.77 x 3.95 x 1.70 Weight (kg/lb.): 1.35 / 2.97 Adjustable Crossovers yes Output Power Output Power (RMS) @ 14.4 VDC, THD 1%: 1 Ch: 150 W x 1 (4Ω) 1 Ch: 250 W x 1 (2Ω) Output Power (RMS) @ 14.4 VDC, THD 10%: 1 Ch: 180 W x 1 (4Ω) 1 Ch: 300 W x 1 (2Ω) Total Power 300 W INPUTS / FILTERS INPUTS: PRE IN Filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. SUBSONIC 45 Hz: Off - 22 - 32 - Hz @ 12 dB/Oct. BOOST 50 Hz (select): Off / + 6 / + 9 dB Remote Volume Controlincluded (-50 ÷ 6) dB Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. General Specs Channels 4 - 2 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 15 A Idling current (power ON/OFF) 1.2 A / 0.04 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4Ω) 0.2 % Bandwidth: 10 ÷ 30K Hz S/N Ratio (A weighted @ 1 V): 95 dB Damping factor (100 Hz @ 4Ω) 45 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN)@ 4 Ch:@ 2 Ch: 2Ω4Ω Max size (mm/in): 223 x 100,5 x 43,6 / 8.77 x 3.95 x 1.71 Weight (kg/lb): 1.35 / 2.97 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 50 W x 4 (4 Ω) 4 Ch 65 W x 4 (2 Ω) 3 Ch 50 W x 2 (4 Ω) + 130 W x 1 (4 Ω) 3 Ch 65 W x 2 (2 Ω) + 130 W x 1 (4 Ω) 2 Ch 130 W x 2 (4 Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%: 4 Ch 60 W x 4 (4 Ω) 4 Ch 75 W x 4 (2 Ω) 3 Ch 60 W x 2 (4 Ω) + 150 W x 1 (4 Ω) 3 Ch 75 W x 2 (2 Ω) + 150 W x 1 (4 Ω) 2 Ch 150 W x 2 (4 Ω) Total Power 600 W INPUTS / FILTERS Inputs: PRE IN FRONT Ch. filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct REAR Ch. filters FULL Yes Hi-Pass: 65-85-115 Hz @ 12 dB/Oct Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

SP 4.900 is the first Hertz amplifier featuring the renewed Hertz ADC (Advanced D-Class) output stage, reaching up to 85% efficiency and delivering an impressive power rating of 160 x 4 (4Ω) W RMS or 500 W x 2 (4Ω) W RMS when bridged, with an ultra-compact size of 211.6 (8.3) x 130 (5.1) mm (in.). Being ultra-compact with impressive power, SP 4.900 is the ideal choice for Motorcycle application and for under-seat in sports cars and behind-seat installations in trucks. Channels 4 - 3 - 2 Nominal power supply voltage 11 ÷ 15 VDC Pulse Operating voltage 6 ÷ 16 VDC Idling current 1.1 A Idling current when off 0.03 mA Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A Remote IN 6 ÷ 15 VDC (9 mA) DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.02% Damping factor @ 1 kHz, 4Ω, 2 VRMS 200 Bandwidth @ -3 dB 10 Hz ÷35 kHz S/N ratio (A weighted @ 1 V Input) 105 dBA Pre-In sensitivity 0.6 ÷ 6 VRMS Speaker-In sensitivity 2.2 ÷ 22 VRMS Minimum load impedance: @ 4Ch 2Ω @ 3Ch 2Ω + 2Ω + 4Ω @ 2Ch 4Ω IP Rating IP55 Operating Temperature Range 0°C (32°F) to 55°C (131°F) Max size (mm/inch) 211.6 x 130 x 49 / 8.33 x 5.118 x 1.929 Weight (kg/lbs) 2.15 / 4.74 Adjustable Crossovers yes Output Power Output Nominal Power (RMS) @ 14.4 VDC, THD 1%: 4 Ch: 160 W x 4 (4Ω) 4 Ch: 250 W x 4 (2Ω) 3 Ch: 160 W x 2 (4Ω) + 500 W x 1 (4Ω) 3 Ch: 250 W x 2 (2Ω) + 500 W x 1 (4Ω) 2 Ch: 500 W x 2 (4Ω) Total Power 1000 W INPUTS: Pre IN / Speaker IN Ch 1-2 Full - Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct. Lo-pass: 50 ÷ 5k Hz @ 12 dB/Oct. Ch 3-4 Full - Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct. Lo-pass 50 ÷ 5k Hz @ 12 dB/Oct. Bass Boost 45Hz (adjustable) (0 ÷ 8) dB [LP = ON only] mm in A 205 8.07 B 211.6 8.33 C 107 4.212 D 130 5.118 E 49 1.929

SP 1.900 mono amplifier features Hertz ADC (Advanced D-Class) output stage, reaching up to 87% efficiency. The maximum power of 1000 W is already available at 2Ω and remains stable even at 1Ω. Being ultra-compact (211.6 x 130 x 49 / 8.3 x 5.1 x 1.9) with impressive power, SP 1.900 is the ideal choice for Motorcycle applications under-seat in sports cars and behind-seat installations in trucks.   Channels 1 Nominal power supply voltage 11 ÷ 15 VDC Pulse Operating voltage 6 ÷ 16 VDC Idling current 1.1 A Idling current when off 0.03 mA Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 50 A Remote IN 6 ÷ 15 VDC (9 mA) DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.1% Damping factor @ 1 kHz, 4Ω, 2 VRMS >300 Bandwidth @ -3 dB 5 Hz ÷ 500 Hz S/N ratio (A weighted @ 1 V Input) 95 dBA Pre-In sensitivity 0.6 ÷ 6 VRMS Speaker-In sensitivity 2.2 ÷ 22 VRMS Minimum load impedance: 1Ω IP Rating IP55 Operating Temperature Range 0°C (32°F) to 55°C (131°F) Weight (kg/lbs) 2.15 / 4.74 Adjustable Crossovers yes Output Nominal Power (RMS) @ 14.4 VDC, THD 1%: 1 Ch: 600 W (4Ω) 1 Ch: 1000 W (2Ω) 1 Ch: 1000 W (1Ω) Total Power 1000 W INPUTS: Pre IN / Speaker IN Full Yes Lo-pass: 50 ÷ 250 Hz @ 24 dB/Oct. Bass Boost 45Hz (adjustable) (0 ÷ 8) dB Phase (adjustable) 0 ÷ 180° Subsonic 25 Hz @ 24 dB/Oct. Remote Volume Control (not included) -21 + 5 dB mm in A 205 8.07 B 211.6 8.33 C 107 4.21 D 130 5.12 E 49 1.93

SP 4.500 features Hertz ADC (Advanced D-Class) output stage, reaching up to 87% efficiency and delivering an impressive power rating of 90 x 4 (4Ω) W RMS or 300 W x 2 (4Ω) W RMS when bridged, with an ultra-compact size of 192.7 (7.58) x 130 (5.1) mm (in.) x 49 (1.9). Being ultra-compact with impressive power, SP 4.500 is the ideal choice for Motorcycle applications and for under-seat in sports cars and behind-seat installations in trucks.   Channels 4 - 3 - 2 Nominal power supply voltage 11 ÷ 15 VDC Pulse Operating voltage 6 ÷ 16 VDC Idling current 0.9 A Idling current when off 0.03 mA Consumption @ 14.4 VDC, MIN load impedance (Max Musical Power) 27 A Remote IN 6 ÷ 15 VDC (9 mA) DC-REM - Remote Turn on by SPK DC from OUTPUT BTL speakers 3.5 ÷ 7 VDC Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power <0.02% Damping factor @ 1 kHz, 4Ω, 2 VRMS >150 Bandwidth @ -3 dB 10 Hz ÷ 35 kHz S/N ratio (A weighted @ 1 V Input) 100 dBA Pre-In sensitivity 0.6 ÷ 6 VRMS Speaker-In sensitivity 2.2 ÷ 22 VRMS Minimum load impedance: @ 4Ch 2Ω @ 3Ch 2Ω + 2Ω + 4Ω @ 2Ch 4Ω IP Rating IP55 Operating Temperature Range 0°C (32°F) to 55°C (131°F) Max size (mm/inch) 192.7 x 130 x 49 / 7.58 x 4.18 x 1.9 Weight (kg/lbs) 2.15 / 4.74 Adjustable Crossovers yes Output Nominal Power (RMS) @ 14.4 VDC, THD 1%: 4 Ch: 90 W x 4 (4Ω) 4 Ch: 150 W x 4 (2Ω) 3 Ch: 80 W x 2 (4Ω) + 330 W x 1 (4Ω) 3 Ch: 145 W x 2 (2Ω) + 300 W x 1 (4Ω) 2 Ch: 300 W x 2 (4Ω) Total Power 600 W INPUTS: Pre IN / Speaker IN Ch 1-2 Full Yes Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct. Lo-pass: 50 ÷ 5k Hz @ 12 dB/Oct. Ch 3-4 Full Yes Hi-pass 50 ÷ 5k Hz @ 12 dB/Oct. Lo-pass 50 ÷ 5k Hz @ 12 dB/Oct. Bass Boost 45Hz (adjustable) OUT 3 - 4 (0 ÷ 8) dB [LP = ON only] mm in A 185.7 7.31 B 192.7 7.58 C 107 4.21 D 130 5.12 E 49 1.93

Overview: The Audison SR 4.500 4-channel amplifier features Audison D-Class Technology (ADT) to deliver high-end performance and efficiency. It features a heavy-duty aluminum chassis in a compact size that's ideal for installation in tight spaces. CEA-2006-A Power Output: The SR 4.500 is compliant with the CEA-2006-A Amplifier Power Standard, which makes it easy for consumers to compare amplifier power specs from one brand to another. The amplifier's CEA-2006-A ratings include: RMS Power (4Ω, 1% THD+N, 14.4 volts): 125 watts x 4 S/N Ratio (ref. 1W output): 83 dBA Additional Power Output Specs: The following additional power output specs are taken @ 14.4 VDC, 1% THD: 4 Channel: 130 watts x 4 (4Ω) 4 Channel: 220 watts x 4 (2Ω) 3 Channel: 120 watts x 2 (4Ω) + 480 watts x 1 (4Ω) 3 Channel: 220 watts x 2 (2Ω) + 440 watts x 1 (4Ω) 2 Channel: 450 watts x 2 (4Ω) Auto Remote Turn-On (ART): The SR 4.500 features ART (Auto Remote Turn-On) which automatically powers on and off the amplifier when an audio signal (or lack of one) is detected on the speaker-level inputs. This is especially helpful when connecting the amplifier to an OEM radio. It eliminates the need for running a remote lead from the head unit to the amp. ART is only available with Speaker Level inputs. Universal Speakers Simulator (USS): The SR 4.500 features Universal Speakers Simulator (USS) technology built into it. USS is a dynamic load circuit that presents a speaker channel with impedance low enough to keep an OEM head unit/amplifier from muting its output, but not low enough to cause over-current or heating problems. This makes the SR 4.500 amplifier ideal for OEM integration. All Channels Driven: Incorporating Audison's "All Channels Driven" design philosophy, the SR 4.500's power supply is designed to handle the cumulative power demand of the amplifier, meaning the amp can deliver the rated power on all channels simultaneously. Optional VCR-S2 Remote Control: The Audison 4-channel amplifier can be used with the optional Audison VCR-S2 Remote Volume Control (sold separately). This lets you adjust the level of the amplifier's B Channel outputs from the front of your vehicle. The rotary control has a point at 0 dB to mark the normal amp output. From there, you can turn the amplifier up to +6dB or attenuate the volume down to -20dB. The VCR-S2's 16' connection cable plugs into a 2-pin socket on the amplifier. Amplifier Controls: The Audison SR 4.500 has a full array of filters and controls to help you configure your audio system for maximum performance. The controls are protected by a removable cover and include the following: Common Controls: Two sets of common controls are provided for the A and B channel sets: Levels (x2): Rotary control let you match the input of the amplifier to the output of your head unit. The amp will accept either line-level or speaker-level inputs. The sensitivity range is 0.2 V (200 mV) to 5 V (line-level) and 800 mV to 20 V (speaker-level). Xover (x2): A and B channel sets each include a 3-way crossover switch for selecting Full, LP, or HP. A corresponding Freq dial lets you select a cutoff frequency from 50 Hz to 3200 Hz. Mono (In L) (x2): A push-button switch lets you run a mono signal to the left input channel (On); Off, lets you run a stereo pair of inputs. ART: A push-button switch lets you activate the Auto Remote Turn-on feature when using speaker-level inputs. ART should be turned Off when using RCA line-level input signals. In B (on/off): A push-button switch determines if the B Channel inputs will be used (on), or if the A Channel inputs will be the input signal for both sets of channels (A&B). Bass Boost: The B Channels include a Bass Boost that can provide up to +12 dB of boost @ 50 Hz. LED Indicators: A Power LED on the top panel will light Blue when the amplifier is powered on and operating normally and Red if the amp over-heats or sees a short-circuit. Connections:  Power/Ground: Set-screw terminals are provided for the power and ground terminals, accepting wire up to 4 AWG (recommended). Note: A 4 AWG amplifier wiring kit with an in-line 50A (or higher) fuse at the battery will be required for installation and is sold separately. Fuses: The SR 4.500 includes two 25A ATO fuse installed on the side of the amp chassis; two spare 25A fuses are included. Remote In/Out: A 6" 2-pin harness provides a 22 AWG Remote In wire for activating the amp when using low-level input signals; a 22 AWG Remote Out can provide a 150 mA trigger output for activating an additional amplifier. Speaker Outputs: Four pairs of set-screw terminals (2 for Ch A/ 2 for Ch B) provide the speaker outputs; terminals can accept wire up to 12 AWG; bridging terminals are identified on the amp. Low-Level (RCA) Inputs: Two sets of stereo RCA inputs (Ch A&B) are provided for connecting an aftermarket head unit to the amplifier; accepts signals ranging from 200 mV-5 V. Speaker-Level Inputs: The SR 4.500 includes two 6" 4-pin speaker-level input harnesses; accepts input signals from a factory headunit ranging from 800 mV-20 V. Pre-Outs: A pair of RCA audio outputs lets you pass RCA input signals out to an additional amplifier. Remote Level Control: A 2-pin socket on the amp chassis lets you connect an optional VCR-S2 remote level control (sold separately), letting you adjust the output volume of the amplifier B Channels from the dashboard. Specifications: Power Supply: 11-15 Volts DC Idling Current: 1.7 A (on); 0.09 mA (off) Consumption (2Ω, 14.4V Max Musical Power): 40 A Remote In: 6.5-15 VDC / 1 mA Remote Out: 6.5-15 VDC/ 150 mA Frequency Bandwidth (-1.5 dB): 10 Hz to 35 kHz Distortion - THD (1kHz at 4Ω, 70% rated power): 0.08% S/N Ratio (A-weighted at 1V): 105 dBA Damping Factor (1kHz at 4Ω, 2Vrms): 200 Dimensions: Width: 10.416", Height: 1.867", Depth: 6.120" (7.390" with wires) Weight: 4.67 lbs. Performance RMS Power Output (Watts x Channels) 125 x 4 Peak Power Output (Watts x Channels) --- Power at 2 Ohms (Watts x Channels) 220 x 4 Power at 1 Ohm (Watts x Channels) --- Bridged Power (Watts x Channels) 450 x 2 Minimum Impedance Bridged 4 Minimum Impedance Unbridged 2 Best Frequency Response 10Hz-35k Hz THD at Rated RMS Power 1% Signal to Noise Ratio 105 dB Input Voltage 14.4v Features Amplifier Class D Built-in DSP No Remote Control No Low-Pass Crossover Frequency 50-3200 Hz Low-Pass Slope (dB/octave) 12 dB/octave High-Pass Crossover Frequency 50-3200 Hz High-Pass Slope (dB/octave) 12 dB/octave Bass Boost 0-12 dB Bass Boost Frequency 50 Hz Fan Cooled No Fuse Rating 50 Speaker Level Inputs Yes Preamp Outputs 2 Width (inches) 10-7/16 Height (inches) 1-7/8 Depth (inches) 6-1/8 Parts Warranty 1 Year Labor Warranty 1 Year

Monoblock Class D Car/Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω - 14.4V This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output from a very compact chassis. Don't let its small size fool you, though... the XDM/600/1 generates serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD). Designed for car or boat installations, the XDM600/1 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. Targeted specifically for subwoofer applications, the XDM600/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), the amplifier's level can be adjusted directly from the driver's seat or captain’s chair. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. Rated Continuous (RMS) Power @ 14.4 V   @ 4 Ω 400 W RMS x 1 @ 3 Ω 500 W RMS x 1 @ 2 Ω 600 W RMS x 1 @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 300 W RMS x 1 @ 3 Ω 400 W RMS x 1 @ 2 Ω 500 W RMS x 1 @ 1.5 Ω N/A General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12/24 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer Yes Filter Defeat Function Yes Infrasonic Filter 30 Hz, defeatable Bass Boost EQ No Output Polarity Switch No Remote Subwoofer Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 8.52 in / 216 mm Depth (D) 7.09 in / 180 mm Net Weight 6.3 lb / 2.86 kg

Monoblock Class D Subwoofer Amplifier, 1500 W x 1 @ 1 - 2 Ω / 750 W x 1 @ 4 Ω - 14.4V Engineered for high-power, subwoofer applications, the RD1500/1 monoblock amplifier is built to deliver staggering amounts of world-class bass output. Equipped with a special low impedance circuit, the RD1500/1 is capable of generating a whopping 1500 watts of output power, at either 1 or 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio’s exclusive NexD™ Class D technology, permitting high power output with exceptional efficiency and low distortion. For your convenience, all of the RD1500/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. The RD1500/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1500/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driver’s seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).   Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 750 W RMS x 1* @ 3 Ω 1000 W RMS x 1* @ 2 Ω 1500 W RMS x 1* @ 1 Ω 1500 W RMS x 1** *Requires “Low Z” switch to be in “2Ω” position**Requires “Low Z” switch to be in “1Ω” position   Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 750 W RMS x 1* @ 3 Ω 1000 W RMS x 1* @ 2 Ω 1200 W RMS x 1* @ 1 Ω 1500 W RMS x 1** *Requires “Low Z” switch to be in “2Ω” position**Requires “Low Z” switch to be in “1Ω” position   General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >82 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1100 / 50 Hz Damping Factor @ 2 Ω >550 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 2 AWG wire Fuse Rating 150A (AFS or AGU)   Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered   Physical Specifications Height (H) 2.13 in / 54 mm Width (W) 18.05 in / 458 mm Depth (D) 6.96 in / 177 mm Net Weight

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX400/4i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up to 200 W x 2. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 4 AWG wire) Analog Input/Pre-Out Harness Speaker Output Harness 6 ft A/B USB Cable

Utilizing our exclusive NexD™ high-speed switching technologies, the ultra-compact RD400/4 amplifier is engineered to deliver loads of audio output power, with incredible efficiency and low distortion. Don’t let its modern styling and small size fool you though, this little powerhouse churns out 100 watts of crystal-clear audio from each of its four channels into 2 ohms (14.4V, 1% THD) and is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a whopping 200W x 2 into 4 ohms. For your convenience, the RD400/4’s controls can be found on top of the amplifier, beneath a protective cover, with all connections located along one side of its chassis. Studio-grade signal processing features include high or low-pass 12 dB / octave filters (defeatable) for each channel pair, with continuously variable frequency selection from 50-500 Hz, and dual-range, differential-balanced inputs capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard equipment, along with all-new input type switches for bridging of stereo output channels without needing to use Y-adaptors. Onboard LED-clipping indicators are also included with your RD400/4. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity settings, quickly and accurately, with no special equipment needed. You’ll also find a set of preamp outputs on-hand, so you can pass signals to another amplifier, almost effortlessly. The RD400/4 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. GENERAL SPECIFICATIONS: Frequency Response 12 Hz – 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High) Min.Copper Power / Ground Wire Gauge: 4 AWG wire Fuse Rating: 40 A (AFS, AGU or MaxiFuse™)

This compact multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality. When using the HD750/1 or HD1200/1 to drive a subwoofer system, the HD600/4 is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price. It can also be deployed on its own as a very capable 3-channel system amplifier with 150 W x 2 to the satellites and 300 W x 1 to a subwoofer system. This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls.