Car Amplifiers and Audio Power Systems

JL AUDIO XDM600/6-24V 6 CH. CLASS D, FULL-RANGE CAR/MARINE AMPLIFIER, 600 W The incredibly flexible XDM600/6-24V packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (28.8V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency. Suitable for car or boat installations, the XDM600/6-24V is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. With the XDM600/6-24V, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The XDM600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 volt may result in damage to the product and will void the warranty.   Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 75 W RMS x 6 @ 2 Ω 100 W RMS x 6 Bridged @ 4Ω 200 W RMS x 3 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 60 W RMS x 6 @ 2 Ω 90 W RMS x 6 Bridged @ 4Ω 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 10.23 in / 260 mm Depth (D) 7.09 in / 180 mm Net Weight 5.8 lb / 2.63 kg

5-Channel Class D Car/Marine System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V    The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design. Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.   Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 Ω 75 W RMS x 4 Main Channels @ 2 Ω 100 W RMS x 4 Main Channels - Bridged @ 4Ω 200 W RMS x 2 Subwoofer Channel @ 4 Ω 180 W RMS x 1 Subwoofer Channel @ 3 Ω 240 W RMS x 1 Subwoofer Channel @ 2 Ω 300 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V   Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ω 60 W RMS x 4 Main Channels @ 2 Ω 90 W RMS x 4 Main Channels - Bridged @ 4Ω 180 W RMS x 2 Subwoofer Channel @ 4 Ω 180 W RMS x 1 Subwoofer Channel @ 3 Ω 240 W RMS x 1 Subwoofer Channel @ 2 Ω 300 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A General Specifications Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™)   Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A   Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 10.23 in / 260 mm Depth (D) 7.09 in / 180 mm Net Weight 6.15 lb / 2.79 kg

8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω - 14.4V The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency. Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit. Here are a few examples of how the XDM800/8 can be used: Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8 Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ω Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ω + rear speakers with 75 W x 2 Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.   General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6/8 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A   Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 14.73 in / 374 mm Depth (D) 7.09 in / 180 mm Physical Specifications

The VIBE Powerbox Mono Class D Amplifier is designed for powerful subwoofer performance, efficient operation, and easy installation, making it an ideal choice for upgrading your car audio system. Featuring VIBE’s advanced Auto Sense technology, this amplifier can automatically turn on and off when using high-level inputs, eliminating the need for a remote turn-on wire. Built with a durable extruded aluminium heatsink, this amplifier delivers excellent heat dissipation and reliable performance even under high load. Its Class D design ensures high efficiency, reduced current draw, and strong output, making it perfect for driving subwoofers in compact or high-performance setups. With adjustable low-pass and subsonic filters, along with bass boost control, this amplifier allows precise tuning for optimal low-frequency performance. Ideal for subwoofer upgrades, bass-focused systems, and car audio installations, it delivers clean and powerful bass with dependable reliability. Specifications Amplifier Type: Mono Class D RMS Power @ 4 Ohm: 350W RMS Power @ 2 Ohm: 700W RMS Power @ 1 Ohm: 1000W Max Power: 2000W Frequency Response: 10Hz – 350Hz Crossover Type: Low Pass / Subsonic Crossover Range: 10Hz – 150Hz Bass Boost: 0dB – 6dB @ 45Hz Technology: Auto Sense Turn-On Cooling: Extruded Aluminium Heatsink Dimensions: 50mm x 358mm x 194mm (H x W x D)

The VIBE Powerbox Mini 4 Channel Class D Amplifier is designed for compact installation, efficient performance, and powerful audio output, making it an ideal upgrade for both factory and aftermarket car audio systems. Building on the success of the Powerbox Micro range, this Mini version delivers increased power with advanced integration features. With 4 x 100W RMS at 4 Ohm and bridging capability up to 2 x 240W, this amplifier offers flexible system design for powering speakers or driving a subwoofer. Its efficient Class D topology ensures reduced heat and lower current draw while maintaining strong, clean output. Equipped with Deltabox™ connectivity, OPTISOUND™ OEM integration, and VIBE Sound Studio™ active crossovers, this amplifier provides seamless integration and precise tuning for optimal sound quality. The Auto Sense turn-on feature allows easy installation without the need for a remote wire, making it perfect for quick and clean upgrades. Ideal for car audio upgrades, compact installs, and complete system builds, the Powerbox Mini delivers performance, efficiency, and versatility in a space-saving design. Specifications Amplifier Type: 4 Channel Class D RMS Power @ 4 Ohm: 4 x 100W RMS Power @ 2 Ohm: 4 x 120W Bridged Power: 2 x 240W Frequency Response: 20Hz – 20kHz Crossover Type: LP / HP / Flat Technology: Class D Topology Features: Deltabox™, OPTISOUND™, VIBE Sound Studio™ Crossovers, Auto Sense Turn-On

The VIBE Powerbox 4 Channel Class AB Amplifier is designed for reliable performance, clean sound output, and easy system integration, making it an ideal choice for powering speakers in both factory and aftermarket car audio systems. Part of the versatile Powerbox range, it offers a solution for a wide variety of audio setups. Utilising Class AB topology, this amplifier delivers warm, natural sound with excellent clarity across all frequencies. With flexible 4-channel configuration and bridging capability, it can power multiple speakers or be configured for higher output applications. Featuring Auto Sense technology, the amplifier can automatically turn on and off when using high-level inputs, eliminating the need for a remote turn-on wire. The extruded aluminium heatsink ensures efficient heat dissipation, while RCA outputs allow easy system expansion with additional amplifiers. Perfect for car audio upgrades, speaker amplification, and multi-channel systems, the Powerbox 4 channel amplifier delivers dependable performance with a sleek and durable design. Specifications Amplifier Type: 4 Channel Class AB RMS Power @ 4 Ohm: 4 x 60W RMS Power @ 2 Ohm: 4 x 80W Bridged Power: 2 x 160W Frequency Response: 20Hz – 20kHz Crossover Type: LP / HP / Flat Technology: Class AB Topology Features: Auto Sense Turn-On, High Level Input, RCA Output for Expansion Cooling: Extruded Aluminium Heatsink Design: Illuminated Red Logo Panel

The VIBE Powerbox Mini 4 Channel Class D Amplifier is designed for compact installation, efficient performance, and clean audio output, making it an ideal upgrade for factory and aftermarket car audio systems. As part of the evolved Powerbox Mini range, it delivers reliable performance with advanced integration features. With 4 x 80W RMS at 4 Ohm and bridging capability up to 2 x 200W, this amplifier offers flexible system configurations for powering speakers or driving a subwoofer. Its efficient Class D topology ensures cooler operation, reduced power draw, and consistent performance. Equipped with Deltabox™ connectivity, OPTISOUND™ OEM integration, and VIBE Sound Studio™ active crossovers, this amplifier enables seamless integration and precise sound tuning. The Auto Sense turn-on feature allows quick installation without the need for a remote wire, making it perfect for simple and clean upgrades. Ideal for car audio upgrades, compact installs, and everyday performance systems, the Powerbox Mini delivers efficiency, versatility, and dependable sound quality in a space-saving design. Specifications Amplifier Type: 4 Channel Class D RMS Power @ 4 Ohm: 4 x 80W RMS Power @ 2 Ohm: 4 x 100W Bridged Power: 2 x 200W Frequency Response: 20Hz – 20kHz Crossover Type: LP / HP / Flat Technology: Class D Topology Features: Deltabox™, OPTISOUND™, VIBE Sound Studio™ Crossovers, Auto Sense Turn-On

The VIBE Powerbox Micro 4 Channel Amplifier is designed for compact installation, plug-and-play convenience, and reliable audio performance, making it the perfect solution for upgrading factory sound systems without complex wiring. Despite its small size, this amplifier delivers impressive power and flexibility for modern car audio setups. With its ultra-compact footprint, the Powerbox Micro can be easily hidden within OEM installations, maintaining a clean and factory look. The plug-and-play design, combined with Molex to ISO connectivity, allows direct inline connection to factory head units without the need for extensive modifications. Featuring a +12V remote output and daisy-chain signal capability, this amplifier is ideal for expanding your system, allowing seamless integration with additional amplifiers. The optional ISO T-harness enables power, ground, and signal to be sourced directly from the head unit, eliminating the need to run cables to the battery. Perfect for OEM upgrades, stealth installs, and simple car audio enhancements, the Powerbox Micro delivers efficiency, ease of use, and dependable performance in a compact design. Specifications Amplifier Type: 4 Channel Micro Amplifier Design: Ultra Compact / Hidden Installation Installation: Plug & Play (OEM Integration Ready) Connectivity: Molex to ISO Inline Connection Outputs: +12V Remote Output, Daisy Chain Signal Output Compatibility: ISO T-Harness (Direct Head Unit Integration) Application: OEM Audio Upgrade / System Expansion

The VIBE Powerbox Micro Amplifier is designed for high performance in an ultra-compact form factor, making it perfect for OEM integrations and discreet installations. Despite its small size, it delivers impressive power output, making it an ideal solution for both speaker and subwoofer upgrades. Engineered for convenience, the Powerbox Micro range supports plug-and-play installation with optional ISO T-harness connectivity, allowing direct integration with factory head units without the need to run power cables through the vehicle. This makes installation faster, cleaner, and more efficient. With high-level input and Auto Sense technology, the amplifier automatically turns on and off without requiring a remote wire. The addition of a +12V remote output and daisy-chain signal capability makes it easy to expand your system, positioning the Powerbox Micro as a versatile building block for modern car audio setups. Perfect for factory stereo upgrades, stealth installs, and compact audio systems, the Powerbox Micro delivers reliable performance, flexibility, and ease of installation. Specifications Amplifier Type: Micro Amplifier (Mono & 4 Channel Options) Design: Ultra Compact / Hidden Installation Installation: Plug & Play (OEM Integration Ready) Connectivity: Optional ISO T-Harness (Direct Head Unit Connection) Inputs: High Level Input Technology: Auto Sense Turn-On Outputs: +12V Remote Output, Daisy Chain Signal Output Application: Factory & Aftermarket Audio Systems

The VIBE POWERBOX65.4-8MDSP-V3 4 Channel DSP Micro Amplifier is designed for plug-and-play installation, advanced sound tuning, and compact high-performance audio. Perfect for both OEM and aftermarket systems, this amplifier delivers powerful sound enhancement without complex installation. Featuring a built-in Digital Signal Processor (DSP), this amplifier allows precise tuning of your audio system for improved clarity, balance, and overall sound quality. With app-based control, users can easily adjust settings, customise sound profiles, and optimise performance directly from their device. With 65W RMS per channel, this micro Class D amplifier delivers impressive power in a compact size, making it ideal for upgrading factory systems or enhancing aftermarket setups. Additional features such as auto turn-on, signal output capability, and wireless music streaming make it a versatile all-in-one solution. Perfect for car audio upgrades, OEM integrations, and DSP-controlled sound systems, the POWERBOX65.4 DSP offers powerful performance, easy installation, and advanced audio control in one compact unit. Specifications Model: POWERBOX65.4-8MDSP-V3 Amplifier Type: 4 Channel Micro Class D with DSP RMS Power @ 4 Ohm (Stereo): 4 x 65W Max Power: 520W Frequency Response: 20Hz – 20kHz Crossover Type: HP / Full Crossover Range: 50Hz Features: Built-in DSP, App Control, Auto Turn-On, Signal Output, Wireless Audio Streaming Topology: Micro Class D Dimensions: 37mm x 187mm x 82mm (H x W x D)

Experience high-resolution audio in your vehicle with the Sony XMGS4 4-channel car amplifier. Designed for uncompromised sound, this amplifier delivers 70 watts RMS per channel at 4 ohms (or 80 watts RMS at 2 ohms) with clean, detailed audio across a wide frequency range of 10–100,000 Hz. Its bridged mode allows up to 160 watts RMS x 2 at 4 ohms, while maintaining 4-ohm stability. Advanced audio controls, including variable high-pass, low-pass, and subsonic filters, along with independent bass boost for front and rear channels, let you fine-tune your sound to perfection. Built-in protection, a cooling fan, and CEA-2006 compliant power ratings ensure reliability and safe operation. Ideal for car audio enthusiasts seeking dynamic, high-fidelity sound, the XMGS4 is your gateway to a premium listening experience on the road. Category Specification / Feature Type 4-Channel Car Amplifier Condition New Power Output 70W RMS x 4 at 4Ω, 80W RMS x 4 at 2Ω, 160W RMS x 2 at 4Ω (Bridged Mode) Bridged Mode Stability 4Ω stable CEA-2006 Compliance Yes Frequency Response 10 Hz – 100 kHz Filters Variable High-Pass (50–300 Hz, 12 dB/oct) Front/RearVariable Low-Pass (50–300 Hz, 12 dB/oct) Front/RearVariable Subsonic (6–70 Hz, 12 dB/oct) Front/Rear Bass Boost Separate Front/Rear, 0–10 dB at 40 Hz Inputs Preamp and Speaker-Level Inputs Cooling Built-in fan Fuse Rating 30A x 2 Wiring Recommendation 8-gauge power and ground leads (not included) Brand Sony

Sony's Elevated Standard subwoofer amp Sony's Mobile ES Series XM-1ES Elevated Standard mono subwoofer amplifier will boost the level of your bass while retaining its pristine, crisp, and low-frequency sound and impact. Capable of dishing out large amounts of power, this amp will help make it sound like you're right there with the drummer and bass player in the studio or on stage. With up to 1,000 watts RMS output, there'll be plenty of volume available for playing your sub the way you want. Signal handling The amplifier features adjustable low-pass and subsonic filters, so you can fine-tune the sound to fit almost any size and style of subwoofer. A remote control knob is included so you can dial in just the right amount of bass. Preamp outputs let you easily add another stereo or mono amp to your system. The amp comes with a wired remote bass knob   Product highlights: mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms 1,000 watts RMS x 1 at 2 ohms CTA-2006 compliant Class D amp technology — frequency response: 10-500 Hz variable low-pass filter (50-500 Hz, 24 dB/octave) variable subsonic filter (5-50 Hz, 24 dB/octave) wired remote level control included More Info: resonance-damping aluminum chassis gold plated connectors preamp inputs and outputs speaker-level inputs (handle up to 16V) wiring and hardware not included with amplifier 4-gauge power and ground leads recommended fuse rating: 25A x 4 dimensions: 10-5/8"W x 2-3/8"H x 8-1/2"D warranty: 3 years MFR # XM1ES Item # 158XM1ES What's in the box: Mono subwoofer amplifier Wired remote control (18' Cable attached) Four 25-amp ATO fuses (installed) 2.5mm Allen wrench Remote mounting bracket Adhesive backed pad Four 3/4" Screws Two 1/2" Screws Two 1/4" Screws Operating instructions Warranty information

Take your car’s bass to the next level with the Sony XM-GS100 mono subwoofer amplifier. Delivering 600 watts RMS at 2 ohms (or 330 watts RMS at 4 ohms), this Class-D amplifier offers powerful, clean, and efficient sound for deep, punchy low frequencies. It features variable low-pass (50–300 Hz) and subsonic (6–70 Hz) filters, plus a 0–10 dB bass boost at 40 Hz, allowing precise control of your subwoofer output. Built-in Dynamic Distortion Suppressor and Active Thermal Control protect your amplifier from overheating, short circuits, and DC offset, ensuring reliable performance. With preamp and speaker-level inputs, as well as preamp outputs for daisy-chaining additional amps, the XM-GS100 is versatile and easy to integrate into any car audio setup. Compact, efficient, and CEA-2006 compliant, this amp is the perfect foundation for high-powered, high-quality bass. Category Specification / Feature Type Mono Subwoofer Amplifier Condition New Amplifier Class D RMS Power Output 330W x 1 at 4Ω / 600W x 1 at 2Ω Peak Power Output 1100W x 1 Frequency Response 10–300 Hz Low-Pass Filter Variable 50–300 Hz, 12 dB/octave Subsonic Filter Variable 6–70 Hz, 12 dB/octave Bass Boost 0–10 dB at 40 Hz Protection Circuits Thermal, Short Circuit, DC Offset Preamp Inputs Yes, RCA Speaker-Level Inputs Yes, 4-pin harness included Preamp Outputs RCA x 2 Fuse Rating 30A x 2 Recommended Wiring 4-gauge power/ground (not included) Dimensions (W x H x D) 10.75" x 2.125" x 8" CEA-2006 Compliance Yes Brand Sony Warranty 3 Years Parts & Labor