HSP
HSP Tail Lock Suits Ldv T60 Dual & Mega Tub 2024+ - LD18-1
$249.00
Secure your T60 Mega Tub with HSP's premium Tailgate Lock Kit. Easy to install, durable, and stylish. Enhance your ute's security today!
The HSP Tail lock is truly a revolutionary product allowing you to sync your LDV T-60 Max & T-60 Mega Tub tailgate with your existing vehicle remote. Installation takes less than an hour as there is no drilling required along with simple wiring. The Tail Lock gives peace of mind knowing that when your car is locked, so is the tailgate.
Fitting
Simple wiring does not require an auto electrician.
No drilling required.
Can be fitted at home or one of 500+ fitting centres internationally
Features
Works with factory remote, Proximity sensor and internal vehicle lock
No-Drill Installation
Plug and Play Wiring
Tested to 100,000+ cycles without destruction
Temperatures Tested from -40°C to 80°C
ISO9001 Compliant
Quick DIY Installation
Preferred OE Product
HSP
HSP Tail Lock Suits Ldv T60 Dual & Mega Tub - LD18
$249.00
The HSP TailGate Lock is a truly revolutionary product allowing you to sync your tailgate with your existing vehicle remote.
Works With Factory Remote
Unlike other units on the market, the TailGate Lock by HSP fully integrates with your existing factory key and runs in sync with your vehicle’s pre-programmed key functionality. This also includes working with proximity sensors, door handles and automatic timed lock functions.
Non-destructive, Plug and Play Installation
HSP have made the TailGate Lock so easy to install that it should take 45 minutes to install. The unique system is plug and play and the only system that does not require any drilling
Enhanced Security
The electronic TailGate Lock by HSP is one of the best ways to keep your tools safe. Did you know that most canopies simply ‘lip’ over the tailgate? Meaning that if your tailgate is unlocked it would be very easy for someone to force your tailgate open.
Features
Manufacturing Quality: Compliant to ISO9001
Cycle Testing: 100,000 switching cycles
Operating temperature: -40 to 80°C
Vibration resistance: 2.7g
Power Draw:
Current consumption (blocking current) 6.7A
Idling current 350MA
Voltage Range 9-15 (rated 12V)
Wiring: Plug and Play
Compatibility
LDV
T60
HSP
HSP Load Rack Ladder Rack Suits Ldv T60 Suits Roll R Cover S3.5 - Full Set (Front & Rear Legs...
$1,230.00
Full set (Front & Rear Legs + Joiner Bar)
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more
Australian-made and owned
Multiple mounting channels (24 in a full kit)
Lightweight – aluminium construction
Premium powder coat finish
150 kg weight rating (full kit)
Full kit comes with front + rear bar and joiner (individual legs or joiner bar can be purchased)
Height can be reduced during the initial fitting
(Please note that the weight rating given is specific to the Load Rack. It is up to the user to determine whether their vehicle can handle additional weight and if it requires additional bracing)
HSP
HSP Load Rack Ladder Rack Suits Ldv T60
Suits Roll R Cover S3.5 - Front Leg Only - LR-RC-F
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more
Features
Australian-made and owned
Multiple mounting channels (24 in a full kit)
Lightweight – aluminium construction
Premium powder coat finish
150 kg weight rating (full kit)
Full kit comes with front + rear bar and joiner (individual legs or joiner bar can be purchased)
Height can be reduced during the initial fitting
(Please note that the weight rating given is specific to the Load Rack. It is up to the user to determine whether their vehicle can handle additional weight and if it requires additional bracing)
HSP
HSP Load Rack Ladder Rack Suits Ldv T60
Suits Roll R Cover S3.5 - Rear Leg Only - LR-RC-R
$580.00
Rear Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more
Features
Australian-made and owned
Multiple mounting channels (24 in a full kit)
Lightweight – aluminium construction
Premium powder coat finish
150 kg weight rating (full kit)
Full kit comes with front + rear bar and joiner (individual legs or joiner bar can be purchased)
Height can be reduced during the initial fitting
(Please note that the weight rating given is specific to the Load Rack. It is up to the user to determine whether their vehicle can handle additional weight and if it requires additional bracing)
HSP
HSP Load Rack Ladder Rack Suits Ldv T60 Fits Dual Cab Tub - Full Set (Front & Rear Legs +...
$1,230.00
Full set (Front & Rear Legs + Joiner Bar)
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more
Features
Australian-made and owned
Multiple mounting channels (24 in a full kit)
Lightweight – aluminium construction
Premium powder coat finish
150 kg weight rating (full kit)
Full kit comes with front + rear bar and joiner (individual legs or joiner bar can be purchased)
Height can be reduced during the initial fitting
(Please note that the weight rating given is specific to the Load Rack. It is up to the user to determine whether their vehicle can handle additional weight and if it requires additional bracing)
HSP
HSP Load Rack Ladder Rack Suits Ldv T60
Fits Dual Cab Tub- Front Leg Only - LR-T-F
$580.00
Front Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more.
HSP
HSP Load Rack Ladder Rack Suits Ldv T60 Fits Dual Cab Tub - Rear Leg Only - LR-T-R
$580.00
Rear Leg Only
The HSP Load Rack represents the perfect blend of functionality and aesthetics. Designed for today’s worker and adventurer, the HSP ladder rack, in its full set, can support an industry-leading weight of up to 150kg. Manufactured from precision-extruded aluminium and coated in a premium semi-matte black, the Load Rack provides a more stylized finish than traditional tubular racks. Additionally, with four channels on each leg and top bar (totalling 24), it’s ready to accommodate a variety of accessories from your favourite brands like Rhino Rack, Yakima, Front Runner, Thule, and more
Features
Australian-made and owned
Multiple mounting channels (24 in a full kit)
Lightweight – aluminium construction
Premium powder coat finish
150 kg weight rating (full kit)
Full kit comes with front + rear bar and joiner (individual legs or joiner bar can be purchased)
Height can be reduced during the initial fitting
(Please note that the weight rating given is specific to the Load Rack. It is up to the user to determine whether their vehicle can handle additional weight and if it requires additional bracing)
Torqit
TORQIT Power Module & Pedal Torq Package For Ldv T60 2.8L - KIT1066PT
$1,530.00
$1,700.00
As the Torqit Power Module improves your vehicle's power and towing capacity across the board, the Torqit Pedal Torq throttle controller boosts the accelerator's responsiveness to elevate your truck's drivability to the fullest.
Power Module
The chip significantly improves the air to fuel ratio, creating less fuel usage, yet producing more power. Even better, This unit can be used as a hardwired or a Bluetooth controlled module.
No need to choose which one you would like. Once the Power Module is installed on a vehicle, it is automatically set to the highest performance mode.
Should you want to do some tweaking, simply download Torqit's Connect app and scan the barcode on the back of the module. This will enable a user to remotely tune the engine depending on preferred driving style or driving condition.
The Bluetooth mode has three optimum settings to choose from; Economy, Cruise and Sport, each increasing with power and torque.
Pedal Torq
The hard wired throttle control is fixed to a driver's dash, allowing easy access to adjust settings. It has three driving modes, each with customised settings (21 settings). These give a driver the ability to finely tune the vehicle’s accelerator to suit his or her personal driving preferences.
Torqit
TORQIT Pedal Torq Plus To Suit Ldv T60 - PTP1032
$449.10
$499.00
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
Torqit
TORQIT Power Module To Suit Ldv T60 - CRM1066
$1,633.50
$1,815.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
