
TJM
AIRTEC SNORKEL POLYETHYLENE BLACK KIT FOR MITSUBISHI TRITON MV 011SAT0150T
$649.00
Elevate your off-road adventures and give your vehicle the edge it deserves with a TJM Airtec snorkel. This premium snorkel kit is an essential upgrade for any serious 4WD enthusiast, engineered to deliver superior engine performance by drawing in cooler and cleaner air from roof level, far above the dust and debris of bonnet-level air. Designed by hand in Australia and made from the highest quality UV-resistant plastic, our snorkels are built to conquer the harshest conditions the Australian climate can throw at them. Whether you're tackling rugged outback trails or navigating coastal tracks, the TJM Airtec snorkel is your vehicle's best defense against the elements, ensuring it breathes easy and runs smoothly. Unleash the full potential of your 4WD with a TJM Airtec snorkel.
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up
Specifications
Material:
High grade UV resistant polyethylene (UV20-UV24) snorkely bodyStainless steel bracket
Design:
Australian made and Engineered to supply correct volume of air to engine
Features:
Traditional style air ram separates rain or moisture from airstream before it enters engine

Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT MITSUBISHI TRITON MV (TCB652DPK)
$539.10
$599.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB652DPK fits Mitsubishi Triton MV 4N16 (2024 – On) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply

Direction-Plus
DIRECTION-PLUS TC629DPK TRANS COOLER FOR MITSUBISHI TRITON
$494.10
$549.00
The TransChill Transmission oil cooler kit is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions. Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic transmission fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised. Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.

MSA
TRITON MSA POWER FOLD™ TOWING MIRRORS (2015-02/2024)
$1,507.50
$1,675.00
MSA 4X4 POWER FOLD BLACK TOWING MIRRORS FOR MITSUBISHI TRITON-TM1152
MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES: MSA 4X4’s 5 Year Warranty
NOTE: AM Radio reception may not be available
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

Torqit
TORQIT PT1062 PEDAL TORQ TO SUIT MITSUBISHI TRITON
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required

TJM
TJM FRONT INDICATOR LAMP KIT SUIT CHASER BULL BARS - PR FOR / ISUZU D-MAX...
$115.01
Delivering product to meet all Australian design rules this TJM Front Indicator light lamp kit is required for most TJM Chaser Bullbar fitments. Consult the information regarding the specific Chaser bull bar to choose the correct light.
Package Weight:
0.10 kg
Compatible Vehicles
ISUZU D-MAX TF 06/12-01/17 Space C/Chas & Pick Up
ISUZU D-MAX TF 06/12-01/17 4Dr C/Chas & Pickup
ISUZU D-MAX TF 02/17-07/20 Space C/Chas & Pick Up
ISUZU D-MAX TF 02/17-07/20 4Dr C/Chas & Pick Up
NISSAN NAVARA NP300 08/15-11/20 ST-STX King C/C & P/Up
NISSAN NAVARA NP300 05/15-11/20 SL-ST-STX-N-TREK 4Dr P/Up
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/18-07/20 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-03/24 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-03/24 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 08/20-10/22 4Dr Pick Up Rogue/Rocco
FORD EVEREST UAII 07/18-08/22 Ambiente 3.2DT
FORD EVEREST UAII 07/18-08/22 Trend & Sport 3.2DT
FORD EVEREST UAII 07/18-08/22 Trend & Sport 2.0DTT
FORD EVEREST UAII 07/18-08/22 Titanium 2.0DTT
FORD RANGER PXII 06/15-07/18 XL 2Dr Cab Chas
FORD RANGER PXII 06/15-07/18 XL 4Dr C/C & P/Up
FORD RANGER PXII 06/15-07/18 XL Super C/C & P/U
FORD RANGER PXII 06/15-07/18 XLS 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 WILDTRAK 4Dr P/Up
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XL 2Dr Cab Chas 3.2DT
FORD RANGER PXIII 08/18-05/22 XL 4Dr C/C & P/Up 2.2DT, 3.2DT
FORD RANGER PXIII 08/18-05/22 XL Super C/C & P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT Super Cab P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLS 4Dr Pick Up 3.2DT
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up

MSA
MSA 4X4 POWER FOLD TOWING MIRRORS TM1155 FOR MITSUBISHI TRITON SERIES 2015-2024
$1,529.11
$1,699.01
VEHICLE DATE: 2015-02/2024
PRODUCT TYPE: Power Fold
SUITS: Mitsubishi Triton
Chrome, Electric, Heated, Indicators, Blind Spot Monitoring, Power Fold
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES:
MSA 4X4’s 5 Year Warranty
MSA POWER FOLD™ is a trademark used under licence

Clearview
CLEARVIEW BLACK COMPACT TOWING MIRRORS HEAT, POWER-FOLD, BSM, INDICATORS, ELECTRIC MITSUBISHI TRITON MR 2019 (MY19)...
$1,336.50
$1,485.00
CLEARVIEW Compact Towing Mirrors Heat, Power-Fold, BSM, Indicators, Electric Mitsubishi Triton MR 2019 (MY19) to 2023 - GLS Variants-CVC-MT-2015-HFSIEB
Mirror Features: Heat, Power-Fold, BSM, Indicators, Electric
Finish: Black
Suits:Mitsubishi Triton MR 2019 (MY19) to 2023 - GLS Variants
The Clearview Compact Towing Mirrors are the perfect solution for those looking for a sleek| space-saving design without sacrificing functionality. These mirrors extend a full 180mm to provide a wider field of vision| essential for safe towing and reversing. Designed to slide back into the vehicle when not in use| they maintain a low profile similar to standard OEM mirrors.
Large convex mirror to reduce blind spots
Sleek design that retracts when not in use
Durable and ADR compliant
Available in black| chrome| and raw finishes
Why You Should Buy:
Ideal for smaller vehicles or those with limited space| the Compact Towing Mirrors offer enhanced visibility and safety while towing| without the bulk of larger mirrors.
Why Clearview Accessories?
Clearview Accessories is a renowned Australian company dedicated to providing high-quality towing mirrors tailored for the Australian market. All our mirrors are designed to improve safety| visibility| and ease of use while towing| ensuring a smooth and stress-free towing experience.
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

HSP
Mitsubishi Triton Mv 2024+ HSP Roll R Cover-T6Rs3.5
$3,300.00
The HSP Roll R Cover Series 3.5 is a premium roll cover designed for utility and style, tailored for vehicles without a sports bar. It features a robust and durable construction that can handle tough conditions while providing a sleek, streamlined look. The easy-to-use rolling mechanism allows for quick access to your truck bed, ensuring secure storage for your gear. Perfect for both work and recreational use, this cover enhances functionality without compromising aesthetics.
Featuring:
100% Australian made and owned
Open, close, and pause in any position.
Compatible with HSP Load Bar cross bar system
Heavy-duty aluminium
Full width integrated LED Strip Light
Built-in AI technology servicing warning light
Compatible with Sports bar
4 Drainage Points & Curtain Drainage Grates
Operate via touch sensor built into side rail
Alternatively, operate via factory vehicle remote
Or operate via HSP Smart App (Andriod and Apple)
And finally, operate via voice command (using SIRI)
100% Curtain retraction (maximizing tub space)
Small compact canister
Mannix black premium black finish
Warranty
Warranties are very low on HSP products so you can rest assured knowing that you have a quality product. However, in the instance something does go wrong we have some reassurances that if anything goes wrong, we have you covered.
3-year warranty on the unit
Minimal moving parts making replacing any items simple
Australian manufactured item meaning parts are readily available
Australian based customer service team
Suits all Mitsubishi Triton MV 2024 With Genuine Sailplane

MSA
MSA 4X4 TOWING MIRROR MITSUBISHI TRITON 2015-02/2024, CHROME, ELECTRIC-TM1101
$789.00
$877.00
VEHICLE DATE: 10/2011-10/2020
PRODUCT TYPE: NON Power Fold
SUITS: Mazda BT50 UP & UR
Chrome, Electric, Heated, Indicators
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES:
MSA 4X4’s 5 Year Warranty
The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

MSA
MSA 4X4 TOWING MIRROR MITSUBISHI TRITON 2015-02/2024, BLACK, ELECTRIC, INDICATORS, HEATED, BSM, POWERFOLD-TM1154
$1,529.00
$1,699.00
Triton MSA POWER FOLD™ Towing MirrorsPRODUCT CODE: TM1154VEHICLE DATE: 2015-02/2024
PRODUCT TYPE: Power Fold SUITS: Mitsubishi Triton
Black, Electric, Heated, Indicators, Blind Spot Monitoring, Power Fold
FEATURES:Four different mirror positionsLarge, single mirror lensAdjustable viewing anglesVertical and horizontal adjustmentUnique pivot designFold inwards or outwardsADR CompliantInjection moulded and die-cast aluminium components
INCLUDES:MSA 4X4’s 5 Year Warranty
MSA POWER FOLD™ is a trademark used under licence MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles. The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough. Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.

Polyair
POLYAIR 2" LIFT RED SERIES AIRBAG KIT, MITSUBISHI - TRITON MK 1998 - 2005, TORSION...
$391.50
$435.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Mitsubishi - Triton MK 1998 - 2005, TORSION BAR

TJM
DEEP DISH FLOOR LINER SUIT MITSUBISHI TRITON DC 5TH GEN F'LIFT 2019-24 MT066-01-3D
$259.00
Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.
Specifications
Size:
Full Set - 1st & 2nd Row
Clips:
Vehicle specific retention clips
Material:
Recycled Material / 100% Waterproof
Warranty:
Wearthrough lifetime warranty
Fitment:
3D scanned for precision fit

MSA
TRITON MSA POWER FOLD TOWING MIRRORS (2015-02/2024)
$1,507.50
$1,675.00
MSA 4X4 POWER FOLD BLACK TOWING MIRRORS FOR MITSUBISHI TRITON-TM1152
MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.
FEATURES:
Four different mirror positions
Large, single mirror lens
Adjustable viewing angles
Vertical and horizontal adjustment
Unique pivot design
Fold inwards or outwards
ADR Compliant
Injection moulded and die-cast aluminium components
INCLUDES: MSA 4X4’s 5 Year Warranty
NOTE: AM Radio reception may not be available
Please note that mirrors may take up to 2 weeks to ship. We're working hard to get your order to you as quickly as possible. Thank you for your understanding and patience!

TJM
TJM DEEP DISH CAR MATS FOR MITSUBISHI TRITON DUAL CAB 2015-2023 MTT001-3D
$259.00
Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.
Specifications
Size:
Full Set - 1st & 2nd Row
Clips:
Vehicle specific retention clips
Material:
Recycled Material / 100% Waterproof
Warranty:
Wearthrough lifetime warranty
Fitment:
3D scanned for precision fit
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM DEEP DISH CAR MATS FOR TRITON DUAL CAB (6TH GEN) 2024+ MT091-3D
$259.00
Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.
Specifications
Size:
Full Set - 1st & 2nd Row
Clips:
Vehicle specific retention clips
Material:
Recycled Material / 100% Waterproof
Warranty:
Wearthrough lifetime warranty
Fitment:
3D scanned for precision fit

TJM
TJM BOCAR ULTIMATE BLACK ALLOY 76MM LOW LOOP NUDGE BAR FOR TOYOTA HILUX 8th GEN,NISSAN...
$600.00
Genuine Bocar Ultimate Series Nudge Bars are constructed from a lightweight Ø76mm alloy tube body and feature a matt-black textured powder-coat finish. Vehicle specific steel mounting brackets – which bolt directly to your vehicle’s chassis – provide a solid mounting system. Built-in accessory tabs for auxiliary lighting and number plate repositioning mounts will cover all compatibility bases. Lower-level crossbars provide extra strength and protection for this Nudge Bar series, while built-in mounting holes offer the ability to add optional H-Racks. These Nudge Bars are ADR approved and Air Bag compatible. All Genuine Bocar Nudge Bars are covered by a 2-year 40,000km warranty, giving you peace of mind to get on with the job.
Compatible Vehicles
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
GWM CANNON NPW 09/20-On 4Dr Pick Up
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up
Specifications
Material:
Matte black textured alloy construction
Size:
Ø76mm tube design body
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
Accessory tabs for auxiliary lighting
Tech:
Parking sensor compatible (Model Dependent)

TJM
TJM BOCAR DELUXE BLACK ALLOY 76MM LOW LOOP NUDGE BAR FOR NISSAN NAVARA , TOYOTA...
$500.01
Genuine Bocar Deluxe Series Nudge Bars are constructed from a lightweight Ø76mm alloy tube body and feature a matt-black textured powder-coat finish. Vehicle specific steel mounting brackets – which bolt directly to your vehicle’s chassis – provide a solid mounting system. Built-in accessory tabs for auxiliary lighting and number plate repositioning mounts will cover all compatibility bases. These Nudge Bars are ADR approved and Air Bag compatible. All Genuine Bocar Nudge Bars are covered by a 2-year 40,000km warranty, giving you peace of mind to get on with the job.
Compatible Vehicles
NISSAN NAVARA D23 S4 12/20-On SL 2Dr C/C
NISSAN NAVARA D23 S4 12/20-On STX King P/Up
NISSAN NAVARA D23 S4 12/20-On SL 4Dr C/C
NISSAN NAVARA D23 S4 12/20-On SL 4Dr P/Up
NISSAN NAVARA D23 S4 12/20-On ST-STX 4Dr C/C & P/Up
NISSAN NAVARA D23 S4 12/20-On SL King C/C & P/Up
TOYOTA HILUX 8th GEN 09/15-07/18 Extra C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-07/18 4Dr C/Chas & Pick Up
TOYOTA HILUX 8th GEN 09/15-On W/mate-SR 2Dr C/Chassis
GWM CANNON NPW 09/20-On 4Dr Pick Up
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up
Specifications
Material:
Matte black textured alloy construction
Size:
Ø76mm tube design body
ADR:
Airbag Compliant. Does not void vehicle manufacturers warranty
Suits:
Accessory tabs for auxiliary lighting
Tech:
Parking sensor compatible (Model Dependent)

TJM
TJM REAR PROTECTION STEP TOWBAR BLACK STEEL FOR MITSUBISHI TRITON MV 03/24-ON 081STRBA50T
$1,800.00
TJM Rear bar offer’s excellent rear protection for your GWM Tank 300, manufactured from high-grade Alloy and chassis mounted for maximum strength. This smart design provides solid protection for rear panels and under-side against both off-road scrapes and use round town. Built to be compatible with all OE safety systems, you can rest assured that your vehicle’s advanced safety features will remain fully functional. Whether you’re replacing a damaged bumper or upgrading for added functionality, this rear bumper replacement is designed to meet your vehicle’s needs with style and reliability. Take the Lead with TJM.
Compatible Vehicles
GWM TANK 300 P01 06/23-On Petrol Lux
GWM TANK 300 P01 06/23-On Petrol Ultra
Specifications
Material:
Textured Black Alloy
Weight:
Weight: 17kg Approx. Weight added to vehicle once removing OEM components -2kg. Excludes accessories.
Tech:
Compatible with all OE safety systems.
Fog:
Optional TJM POD Lamp (033LIGHTWKPOD)
Package Weight:
43.00 kg

TJM
TJM TRADESMAN BULL BAR BLACK STEEL FOR MITSUBISHI TRITON MV 070ST15N50T
$1,750.00
TJM’s genuine Tradesman bull bar blends functionality and features at a great price for your Mitsubishi. The TJM Tradesman bull bar is 4x4 equipped with LED combination indicator park lights. It’s ready to work for you with dual aerial mounts and mounting points for installing large driving lights. A stylish 76mm centre tube and 63mm outer tubes offer strength and help protect your vehicle’s headlights and Radiator. Comprehensive engineering offers peace of mind with ADR compliance and air bag compatibility whilst working with Mitsubishi Safety Features including Front Cross Traffic Alert.. Take the Lead with TJM on your work site
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up
Specifications
Material:
Texture Black Steel
ADR:
Airbag Compliant
Tech:
Suits all Mitsubishi Safety feature's including Front Cross Traffic alert
Winch:
Not Winch compatible
Indicators:
LED Indicator/Park Lights
Lights:
Suits TJM Seeker & TJM Ultima Light range
Aerial:
Dual aerial tab

TJM
XGS TOP STRUT MOUNT - EACH FOR MITSUBISHI CHALLENGER / MITSUBISHI PAJERO SPORT/ MITSUBISHI TRITON...
$79.00
Top strut mount to suit Mitsubishi Triton vehicles. TJM recommends you replace strut top assemblies every 100,000kms or when upgrading your vehicle's struts.
Package Weight:
1.35 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM UNDERBODY GUARD FRONT STEEL BLACK FOR MITSUBISHI PAJERO SPORT/ MITSUBISHI TRITON MR
$295.00
Keep your vehicle's vital components out of the firing line with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. TJM under-body guards will take the brunt of lower off-road collisions, ensuring vital components are shielded from direct impact. A black powdercoat finish and corrosion resistance offer additional protection.
FEATURES:
Material:
Electrocoated 3mm steel with black powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Kit:
Combine with Sump & Transmission Guards for total protection
Package Weight:
11.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS U BOLT WITH NUTS EACH FOR MITSUBISHI TRITON ML 07/06-08/09/  MITSUBISHI TRITON MN 09/09-03/15
$25.00
TJM XGS U-bolts are matched in length to our leaf spring range to accommodate increased spring thickness. This XGS U-bolt is 12 x 72 x 170mm with a square top (B) and should be used when upgrading to TJM leaf springs. We recommend replacing factory fitted U-bolts when new springs are installed. The thread of your vehicle's existing U-bolts thread may have stretched from usage and could work loose with the installation of a new spring pack.
FEATURES:
Size:
Square Top - Material OD 12mm - Inside Width 72mm - Inside Length 190mm
Size:
Square Top - Material OD 12mm - Inside Width 72mm - Inside Length 190mm
Package Weight:
0.40 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS TORSION BARS - PAIR FOR MITSUBISHI TRITON MK 10/96-06/01 / MITSUBISHI TRITON MK 07/01-06/06
$505.00
TJM XGS Torsion Bars are designed as an upgrade of the original equipment product are of increased rate and quality spring steel. This helps to maintain ride height after accessories such as bull bars, winches and dual batteries are fitted to the vehicle. Due to the increased spring rate it is recommended that the shock absorbers are also upgraded to TJM XGS Gold.
Material:
Manufactured from premium grade spring steel. Powdercoat black finish
Size:
Diameter 27.5mm Length 1368mm
Suits:
Required when fitting accessories like bull bars, winches and dual batteries
Tech:
Drop forged for strength and durability
Package Weight:
13.00 kg
Compatible Vehicles
MITSUBISHI TRITON MK 10/96-06/01
MITSUBISHI TRITON MK 07/01-06/06

TJM
XGS TAILSHAFT SPACER KIT REAR FOR MITSUBISHI TRITON ML / MITSUBISHI TRITON MN
$520.00
This rear tailshaft spacer kit suits Mitsubishi Triton ML / MN vehicles. Bearing spacer kits are required to realign a vehicle's tailshaft when suspension has been raised.
Package Weight:
0.40 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS RUGGED REAR SHOCK (EA) FOR MITSUBISHI TRITON
$350.00
Upgrade your off-road vehicle with XGS Rugged Shocks and experience a transformation in ride handling, load carrying, and towing capabilities. These shock absorbers are designed to withstand the toughest terrain and provide a smooth and controlled ride. With a 52mm piston bore, these shocks have a larger oil capacity for enhanced performance. The nitrogen-charged design allows for precise damping, and the multi-stage velocity controlled valving automatically adjusts to the terrain to deliver all-around performance. The trimmable ride height also allows you to fine-tune your suspension setup for the perfect balance of performance and comfort. Upgrade to XGS Rugged Shocks and take your vehicle to the next level.
Shock Construction:
Monotube - 3mm tube wall thickness
Shock Design:
Nitrogen ChargedDesigned for everyday driving and off road adventures
Piston Bore:
52mm
Piston Rod:
18mm hard chrome plated
Lift:
0-40mm
Features:
High durability factory quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston sealMono Tube design allows for larger oil capacityIncludes polypropylene Stone Guard
Package Weight:
3.60 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS RUGGED COMFORT REAR SHOCK (EACH) FOR MITSUBISHI TRITON MV
$350.00
Upgrade your off-road vehicle with XGS Rugged Shocks and experience a transformation in ride handling, load carrying, and towing capabilities. These shock absorbers are designed to withstand the toughest terrain and provide a smooth and controlled ride. With a 52mm piston bore, these shocks have a larger oil capacity for enhanced performance. The nitrogen-charged design allows for precise damping, and the multi-stage velocity controlled valving automatically adjusts to the terrain to deliver all-around performance. The trimmable ride height also allows you to fine-tune your suspension setup for the perfect balance of performance and comfort. Upgrade to XGS Rugged Shocks and take your vehicle to the next level.
Shock Design:
Nitrogen Charged, Mono Tube
Construction:
Monotube 3mm wall thickness
Piston Bore:
52mm
Piston Rod:
18mm hard chrome
Lift:
0-40mm
Features:
High durability factory quality rubber bushesHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston sealMono Tube design allows for larger oil capacityIncludes polypropylene Stone Guard
Package Weight:
3.88 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS RUGGED COMFORT FRONT STRUT (EACH) FOR MITSUBISHI TRITON MV
$469.00
Upgrade your off-road vehicle with XGS Rugged Struts and experience a transformation in ride handling, load carrying, and towing capabilities. These shock absorbers are designed to withstand the toughest terrain and provide a smooth and controlled ride. With a 52mm piston bore, these shocks have a larger oil capacity for enhanced performance. The nitrogen-charged design allows for precise damping, and the multi-stage velocity controlled valving automatically adjusts to the terrain to deliver all-around performance. The trimmable ride height also allows you to fine-tune your suspension setup for the perfect balance of performance and comfort. Upgrade to XGS Rugged Struts and take your vehicle to the next level.
Shock Design:
Nitrogen Charged, Mono Tube
Construction:
Monotube 3mm wall thickness
Piston Bore:
52mm
Piston Rod:
18mm hard chrome
Lift:
0-40mm
Features:
High durability factory quality rubber bushesAdjustable spring seatHigh grade damping oilAutomatic multi-stage velocity controlled valvingTeflon banded piston sealMono Tube design allows for larger oil capacity
Package Weight:
3.78 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS LEAF SPRINGS REAR RAISED 300KG (1 ONLY) FOR MITSUBISHI TRITON MV 03/24-ON GLX 4DR...
$390.01
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
45mm±5mm @ 300kg
No. of Leaves:
3+2
Free Camber:
175±5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS LEAF SPRINGS REAR RAISED 150KG (1 ONLY) FOR MITSUBISHI TRITON MV 03/24-ON GLX 4DR...
$370.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
45mm±5mm @ 150kg
No. of Leaves:
3+2
Free Camber:
175±5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
24.00 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS LEAF SPRINGS BUSH KIT - REAR FOR MITSUBISHI TRITON MQ 04/15-11/18 / MITSUBISHI TRITON...
$120.00
TJM XGS polyurethane spring bushes are manufactured from premium grade materials to reduce noise, vibration and ride harshness. With high resilience and shape-memory retention, these spring bushes ensure the positive location of all components.
Package Weight:
0.50 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS LEAF SPRINGS BUSH KIT - REAR FOR MITSUBISHI TRITON ML 07/06-08/09 / MITSUBISHI TRITON...
$139.00
TJM XGS spring and shackle bush kit suit your Mitsubishi Triton ML-MN. TJM bushes ensure the positive location of suspension components which helps provide direct responsive steering, low maintenance and improved stability. We offer a wide range of bush kits including leaf spring, panhard rod and control arm bushes.
Package Weight:
1.00 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS LEAF SPRING REAR RAISED 300KG (1 ONLY) FOR MITSUBISHI TRITON MQ 04/15-11/18 2DR C/CHASSIS...
$425.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
40mm±5mm @ 360kg
No. of Leaves:
4+2 + Caster Wedge
Free Camber:
148mm +/- 5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
31.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS LEAF SPRING REAR RAISED 300KG (1 ONLY) / MITSUBISHI TRITON ML 07/06-08/09 / MITSUBISHI...
$430.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
30mm±5mm @ 300kg
No. of Leaves:
5+2
Free Camber:
165mm +/- 5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
31.00 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS LEAF SPRING REAR RAISED 100KG (1 ONLY) FOR MITSUBISHI TRITON
$360.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
40mm±5mm @ 100kg
No. of Leaves:
3+2 + Spring Plate & Caster Wedge
Free Camber:
148mm +/- 5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
28.00 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS LEAF SPRING REAR RAISED 100KG (1 ONLY) FOR MITSUBISHI TRITON
$360.00
XGS Leaf Springs are the perfect choice for any 4x4 owner looking to upgrade their leaf springs as part of a complete suspension overhaul. These springs are designed and engineered in Australia using high-stress spring steel, ensuring that they are built to withstand even the toughest conditions. They provide a significant improvement in load carrying ability, towing safety, ride comfort, and directional stability, making them perfect for off-road use. The increased flexibility of these leaf springs leads to better traction and increased wheel travel, resulting in improved ground clearance. Plus, with XGS's cutting-edge design and manufacturing techniques, you can trust that these springs will provide a consistently smooth ride. Whether you're a seasoned off-road adventurer or just looking to enhance your vehicle's performance, XGS Leaf Springs have got you covered.
Material:
High-stress spring steel
Lift/LBA:
30mm±5mm @ 100kg
No. of Leaves:
4+2
Free Camber:
165mm +/- 5mm
Features:
Graphite coated to reduce frictionBolt clips for better rebound controlZinc coated bush inserts to ensure optimum bush lifeGreaseable friction pads to improve service life and ridge qualityDrawn tapered and diamond cut leaves to distribute load over a larger surface area, reduce load stress and protect against breakage
Package Weight:
28.00 kg
Compatible Vehicles
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS GREASEABLE SHACKLE EACH FOR MITSUBISHI TRITON
$49.01
TJM XGS greaseable shackle rear to suit Mitsubishi Triton ML /MN vehicles. TJM greaseable shackles form part of your suspension setup and helps connect leaf springs to your vehicles chassis. When leaf springs flex, the distance from main eye to shackle eye changes. As the main eye end is securely mounted, flexing results in the length changes at the shackle end of the leaf pack. These shackles can be greased regularly to lubricate bushes to provide reduced friction and operating temperatures.
Package Weight:
0.80 kg
Compatible Vehicles
MITSUBISHI TRITON MK 10/96-06/01
MITSUBISHI TRITON MK 07/01-06/06
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS GREASEABLE SHACKLE EACH FOR MITSUBISHI TRITON
$39.00
TJM XGS greaseable shackle rear to suit Mitsubishi Triton MQ vehicles. TJM greaseable shackles form part of your suspension setup and helps connect leaf springs to your vehicles chassis. When leaf springs flex, the distance from main eye to shackle eye changes. As the main eye end is securely mounted, flexing results in the length changes at the shackle end of the leaf pack. These shackles can be greased regularly to lubricate bushes to provide reduced friction and operating temperatures.
Package Weight:
0.90 kg
Compatible Vehicles
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
XGS GREASEABLE PIN EACH FOR ISUZU D-MAX/ MAZDA BT-50/ NISSAN NAVARA/ TOYOTA HILUX/ FORD RANGER/...
$12.00
XGS Greaseable Pins can be regularly lubricated with grease to reduce friction, operating temperatures and extend the lifespan of the bushings. It allows for easy maintenance and improved performance.
Package Weight:
0.20 kg
Compatible Vehicles
ISUZU D-MAX
MAZDA BT-50
NISSAN NAVARA
TOYOTA HILUX
FORD RANGER PK 04/09-08/11
FORD RANGER PXI 09/11-05/15 WILDTRAK 4Dr P/Up
FORD RANGER PXI 09/11-05/15 XL 2Dr Cab Chassis
FORD RANGER PXI 09/11-05/15 XL 4Dr C/C & P/Up
FORD RANGER PXI 09/11-05/15 XL Super C/C & P/Up
FORD RANGER PXI 09/11-05/15 XLS 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT 4Dr Pick Up
FORD RANGER PXI 09/11-05/15 XLT Super Cab P/Up
FORD RANGER PXII 06/15-07/18 XL 2Dr Cab Chas
FORD RANGER PXII 06/15-07/18 XL 4Dr C/C & P/Up
FORD RANGER PXII 06/15-07/18 XL Super C/C & P/U
FORD RANGER PXII 06/15-07/18 XLS 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT 4Dr Pick Up
FORD RANGER PXII 06/15-07/18 XLT Super Cab P/Up
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 2.0DTT
HOLDEN COLORADO
HOLDEN RODEO
LDV T60
MITSUBISHI TRITON

TJM
XGS GREASABLE SHACKLE (EACH) FOR MITSUBISHI TRITON
$49.01
Shackles are an integral component of the suspension system that attaches between the leaf spring and vehicle frame. As a leaf spring flexes up or down, its length from main eye to shackle eye changes. Since one end is mounted solidly (the main eye), and cannot move, length changes occur at the shackle end of the leaf pack. TJM greaseable shackles allows regular greasing to lubricate the bushes with no dismantling required for access.
Package Weight:
1.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
XGS COIL SPRINGS FRONT RAISED 50KG+ (PAIR) FOR MITSUBISHI PAJERO SPORT/ MITSUBISHI TRITON MQ 04/15-11/18...
$290.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
50kg+
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
10.65 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS COIL SPRINGS FRONT RAISED 50KG+ (PAIR) FOR MITSUBISHI CHALLENGER / MITSUBISHI CHALLENGER PC/ MITSUBISHI...
$320.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
50kg+
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
10.65 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI CHALLENGER PC 07/13-12/15
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
XGS COIL SPRINGS FRONT RAISED 0-50KG (PAIR) FOR MITSUBISHI PAJERO SPORT / MITSUBISHI TRITON MQ...
$310.00
XGS coil springs are a crucial component of any 4x4 vehicle's suspension system. Made from new generation X5K steel, these springs offer exceptional strength and unbeatable reliability, making them a great choice for anyone looking to improve their vehicle's performance. As part of a complete XGS Suspension upgrade, these springs offer a linear spring rate for reliable suspension performance, as well as improved ground clearance and stability. This means that your vehicle will be better equipped to handle challenging off-road conditions and the added weight of load-bearing accessories. And, because they are engineered, developed, and manufactured right here in Australia, you can be sure that they are designed to meet the unique demands of driving on Australian roads and off-road terrain. Contact your local TJM store for more information.
Material:
X5K Spring Steel
Coil Spring Design:
Linear rate
Coil Location:
Front
LBA:
0-50kg
Lift:
0-35mm
Features:
Fully scragged and load testedPhosphate dipped for maximum corrosion protectionEpoxy powder coating for durable finishShot peened to ensure maximum fatigue life
Package Weight:
11.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM VENTURER HOOP BLACK STEEL FOR MITSUBISHI TRITON MV
$165.00
The TJM Venturer removable hoop features a strong multi-fold channel, all-steel construction and a bold design that perfectly complements your Mitsubishi Triton. The TJM Venturer hoop lets you customise the look of your Venturer bar, allowing the fitment of TJM light bars and aerials of your choice. Take the lead with this custom hoop for your TJM Venturer bar.
Material:
Matte Black textured steel
Suits:
Compatible with Ultimate 24” Light Bar X1 or Ultimate 8” Light Bar up to X3
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD TRANSMISSION STEEL BLACK/ MITSUBISHI CHALLENGER PB / MITSUBISHI TRITON MN /ML
$200.00
Keep your vehicle's vital underbody components protected with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. Our under-body guards are shot blasted, immersed in zinc phosphate and black powdercoat for corrosion resistance and durability. For maximum protection combine a front under-body guard, sump guard and transmission guard.
FEATURES:
Material:
Electrocoated 3mm Steel with Black Powdercoat Finish
Size:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Suits:
All models
Kit:
Combine with Front & Sump Guards for total protection
Package Weight:
12.00 kg
Compatible Vehicles
MITSUBISHI CHALLENGER PB 01/09-06/13
MITSUBISHI TRITON ML 07/06-08/09
MITSUBISHI TRITON MN 09/09-03/15

TJM
TJM UNDERBODY GUARD TRANSMISSION/ MITSUBISHI TRITON MV 03/24-ON GLX
$260.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Transmission Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
13.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD SUMP FOR MITSUBISHI TRITON MV 03/24-ON
$180.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Sump Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
7.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD SUMP FOR MITSUBISHI TRITON MV 03/24-ON GLX
$180.00
Keep the vital components protected on your Mitsubishi Triton with a TJM Sump Underbody Guard. A simple collision with a tree stump or rock could cause significant damage to the steering, engine sump or transmission, leaving you stranded and out of pocket. Our underbody guards are shot blasted, e-coated and finished in a black for corrosion resistance and durability. For maximum protection combine a front underbody guard, sump guard and transmission guard.
Material:
Electrocoated 3mm steel with black textured powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Package Weight:
7.50 kg
Compatible Vehicles
MITSUBISHI TRITON MV 03/24-On GLX 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLX+ 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GLS 4Dr P/Up
MITSUBISHI TRITON MV 03/24-On GSR 4Dr P/Up

TJM
TJM UNDERBODY GUARD FRONT STEEL BLACK FOR MITSUBISHI PAJERO SPORT / MITSUBISHI TRITON MQ/MR
$175.00
Keep your vehicle's vital components out of the firing line with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. TJM under-body guards will take the brunt of lower off-road collisions, ensuring vital components are shielded from direct impact. A black powdercoat finish and corrosion resistance offer additional protection.
FEATURES:
Material:
Electrocoated 3mm steel with black powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Kit:
Combine with Sump & Transmission Guards for total protection
Package Weight:
11.00 kg
Compatible Vehicles
MITSUBISHI PAJERO SPORT QE 12/15-01/20
MITSUBISHI PAJERO SPORT QF 02/20-03/24
MITSUBISHI TRITON MQ 04/15-11/18 2Dr C/Chassis
MITSUBISHI TRITON MQ 04/15-11/18 Club C/Chas & P/Up
MITSUBISHI TRITON MQ 04/15-11/18 4Dr C/C & P/Up
MITSUBISHI TRITON MR 12/18-02/24 2Dr C/Chassis
MITSUBISHI TRITON MR 12/18-02/24 Club C/Chas & P/Up
MITSUBISHI TRITON MR 12/18-02/24 4Dr C/C & P/Up

TJM
TJM UNDERBODY GUARD FRONT STEEL BLACK FOR MITSUBISHI CHALLENGER PB MITSUBISHI TRITON MN /ML
$140.00
Keep your vehicle's vital components out of the firing line with TJM's range of under-body guards. A simple collision with a tree stump or rock could cause significant damage to steering, engine sump or transmissions, leaving you stranded and out of pocket. TJM under-body guards will take the brunt of lower off-road collisions, ensuring vital components are shielded from direct impact. A black powdercoat finish and corrosion resistance offer additional protection.
FEATURES:
Material:
Electrocoated 3mm steel with black powdercoat finish
Design:
Engineered and press folded to offer maximum underbody impact protection
Tech:
Drain hole access cut-outs and vents where required
Kit:
Combine with Sump & Transmission Guards for total protection
Package Weight:
6.60 kg
Compatible Vehicles
ISUZU D-MAX TF 06/12-01/17 Space C/Chas & Pick Up
ISUZU D-MAX TF 06/12-01/17 4Dr C/Chas & Pickup
ISUZU D-MAX TF 02/17-07/20 2Dr Cab Chassis Hi Rider
ISUZU D-MAX TF 02/17-07/20 Space C/Chas & Pick Up
ISUZU D-MAX TF 02/17-07/20 4Dr C/Chas & Pick Up
ISUZU MU-X RF 11/13-04/17
ISUZU MU-X RF 05/17-07/21
HOLDEN COLORADO RG 06/12-06/16