AUDISON Prima Line - 4 AUDISON Prima Line - 4
AUDISON Prima Line - 4" 4 Ohm Midbass Component -... $189.99
The AP 4 midbass offers very extended frequency response, both in high and low frequencies, combined with high efficiency and features a 25 mm pure copper voice coil to ensure more balance in mid-high frequency ranges. Technical Specs Nominal diameter 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 120 W Power Handling - Continuous 40 W Sensitivity 91 dB Frequency Response 80 ÷ 7,5k Hz Voice Coil Ø 25 mm Magnet size D x d x h 70 x 32 x 10 mm (2.75 x 1.26 x 0.39 in) Xmax 1.8 mm (0.07 in) Electric-acoustic Specs Re 3.2 Ohm Fs 125 Hz Le 0.16 mH Vas 1.5 l (0.053 ft) Mms 5 g (0.176 oz) Cms 0.3 mm/N BL 3.4 T•m Qts 1 Qes 1,2 Qms 7.6 General Weight 0.4 kg Dimensions Dimension A 103 mm (4.06 in) Dimension A3 130 mm Dimension B 93 mm (3.66 in) Dimension C 43 mm (1.69 in) Dimension D 41 mm (1.61 in)
BUY NOW
AUDISON Hi-Res Bluetooth Receiver (B-Con) AUDISON Hi-Res Bluetooth Receiver (B-Con)
AUDISON Hi-Res Bluetooth Receiver (B-Con) $364.99
The Audison B-CON is an advanced Bluetooth 5.0 receiver specifically designed for automotive use, which has obtained the "Hi-Res Audio Wireless" certification from the Japan Audio Society. This device is the ideal choice for those seeking high-quality audio streaming from Hi-Res players such as Fioo or Sony Walkman, as well as from the latest Android and Apple smartphones. The B-CON is compatible with all audio formats and delivers maximum performance with uncompressed Bluetooth streaming (up to 96 kHz / 24 bit), available only on Android devices compatible with the LDAC codec. This allows for superior sound quality when playing local audio files or using streaming services like Tidal and Qobuz. The device integrates RCA analog outputs and Toslink optical digital outputs, offering versatile connections to high-quality audio systems. With the implementation of the LDAC codec, the B-CON ensures a frequency response up to 40 kHz, providing an immersive and faithful listening experience. Additionally, the B-CON supports handsfree call management and features "Absolute Volume" to preserve the dynamic range of the audio signal, preventing quality loss during volume adjustments. In summary, the Audison B-CON is an essential accessory for car audio enthusiasts seeking a superior listening experience without compromising sound quality.   Receiver Tech Data Power Supply Voltage 6 ÷ 24 VDC Idling Current 70 mA Remote IN 3 ÷ 12 VDC (0.5 mA) Bluetooth Data Type: Bluetooth 5.0 + EDRCodec: LDAC, AAC, SBCProfile: Bluetooth A2DP 1.3, AVRCP 1.6 Digital Input Optical: S/PDIF Optical (Max 24 bit/192 kHz) Digital Output Optical: S/PDIF Optical (Max 24 bit/192 kHz) Analog Output Performance Bandwidth (Max) 20 ÷ 48k HzOutput Level 2 VRMSDistortion – THD @1 kHz, 1 VRMS 0.003%S/N RATIO (A weighted) 100 dBA   Features Up to 96 kHz / 24-bit BT streaming LDAC codec compatibility for Android devices ACC codec compatibility for iOS devices Automatic handsfree call manage Absolute volume function, to ensure a full dynamic range audio signal Digital output Analog RCA outputs Digital optical input with pass-through capability to the Digital output (no DA/AD signal conversion) Additional micro-USB power plug for non-automotive use
BUY NOW
AUDISON Prima Line - Oem Component Speaker (Apbmw K4E) AUDISON Prima Line - Oem Component Speaker (Apbmw K4E)
AUDISON Prima Line - Oem Component Speaker (Apbmw K4E) $574.99
The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin. Technical Specs LF Woofer Size 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 100 W Power Handling - Continuous 50 W Frequency Response 90 ÷ 23k Voice Coil Diameter 25 mm (0.98 in) Magnet Size 50 x 29 x 3 Crossover Level Adjustment -3; 0 Technical Specs HF Tweeter Size 29 mm (1.14 in) Voice Coil Diameter 25 mm (0.98 in) Electric-acoustic Specs LF Re 3.3 Ohm Fs 90 Hz Mms 6.3 g Cms 0.5 BL 4.8 Qms 8.2 Qts 0.48 Vas 1.8 l Le 0.32 mH Spl 88 dB Xmax 0.5 mm (0.02 in) Kit Tech Data Crossover Low-Pass Hi-Pass: 6 KHz @ 6dB/Oct. Cone Diameter 80 mm General Weight Woofer 0.46 kg Weight Tweeter 0.06 kg
BUY NOW
AUDISON Prima Line - Oem Component Speaker (Apbmw K4M) AUDISON Prima Line - Oem Component Speaker (Apbmw K4M)
AUDISON Prima Line - Oem Component Speaker (Apbmw K4M) $574.99
The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin. Technical Specs LF Woofer Size 100 mm (4 in) Impedance 4 Ohm Power Handling - Peak 100 W Power Handling - Continuous 50 W Voice Coil Diameter 25 mm (0.98 in) Magnet Size 50 x 29 x 3 Crossover Type 89 Crossover Type Hi-Pass: 6 KHz @ 6dB/Oct. Crossover Level Adjustment -3; 0 Technical Specs HF Tweeter Size 29 mm (1.14 in) Voice Coil Diameter 25 mm (0.98 in) Electric-acoustic Specs LF Re 3.3 Ohm Fs 90 Hz Mms 6.4 g Cms 0.5 BL 4.8 Qms 8.9 Qts 0.48 Vas 1.8 l Le 0.32 mH Spl 88 dB Xmax 0.5 mm (0.02 in) Kit Tech Data Cone Diameter 80 mm General Weight Woofer 0.426 kg Weight Tweeter 0.06 kg
BUY NOW
AUDISON Prima Active Power Acc Kit Apbxkit
AUDISON Prima Active Power Acc Kit Apbxkit $149.99
The Audison APBXKIT makes it easy to connect and power compatible Audison subwoofer enclosures. Designed for a clean and reliable installation, it ensures your subwoofer performs at its best without unnecessary hassle. Built with quality materials for lasting durability, this kit is ideal for achieving a secure, efficient setup. Check compatibility with your subwoofer before purchase and have it installed by us or a qualified technician for optimal results.
BUY NOW
AUDISON Prima Line - 5 AUDISON Prima Line - 5
AUDISON Prima Line - 5" 2-Way 4 Ohm Component Speakers... $419.99
Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.   Technical Specs LF Woofer Size 130 mm (5 in) Impedance 4 Ohm Power Handling - Peak 225 W Power Handling - Continuous 75 W Frequency Response 70 ÷ 20k Voice Coil Diameter 32 mm (1.26 in) Magnet Size 85 x 40 x 13 Crossover Type HP @ 3,5 kHz - 6 dB Oct Crossover Level Adjustment +2; 0 Technical Specs HF Tweeter Size 26 mm (1 in) Voice Coil Diameter 20 mm (1.26 in) Electric-acoustic Specs LF Re 3.1 Ohm Fs 90 Hz Mms 9 g Cms 0.34 BL 4.6 Qms 8 Qts 0.68 Vas 4 l Le 0.25 mH Spl 93 dB Xmax 2 mm (0.08 in) Kit Tech Data Cone Diameter 107 mm General Weight Woofer 0.65 kg Weight Tweeter 0.04 kg
BUY NOW
AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" + 4" 3-Way 4 Ohm... $524.99
APK 163 Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. Technical Data Comp 3 way System Size 165 mm (6.5″) Woofer100 mm (4″) Midbass26 mm (1″) Tweeter46,5 x 37,5 x 20,1 mm (1.83″ x 1.47″ x 0.8″) APCX TW Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX MD Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX WF Crossover Power Handling 125 W Continuous Power375 W Peak Power Impedance 4 Ω Frequency Response 50 – 20k Hz Sensitivity 93,5 dB/Spl Technical Specifications Specification Details Woofer Size 165 mm (6.5 in.) Midbass Size 100 mm (4 in.) Tweeter Size 26 mm (1 in.) Power Handling (Peak) 375 Watts Power Handling (Continuous) 125 Watts Impedance 4 Ohm Frequency Response 50 Hz – 20 kHz Crossover Type LP @ 600 Hz – 6 dB/OctHP @ 600 Hz / 3.5 kHz – 6/6 dB/OctHP @ 3.5 kHz – 6 dB/Oct Component Adjustment 0 to +2 dB Magnet Size Component Magnet Size (mm) D × H (in.) Woofer 85 × 40 × 15 3.35 × 1.57 × 0.59 Midrange 70 × 32 × 10 2.75 × 1.26 × 0.39 Tweeter 19 × 13 0.75 × 0.12 Weight (per speaker) Component Weight kg (lb) Woofer 0.78 kg (1.72 lb) Midbass 0.40 kg (0.88 lb) Tweeter 0.04 kg (0.09 lb) Voice Coil Diameter Component Ø mm (in.) Woofer 32 mm (1.26 in.) Midbass 25 mm (1 in.) Tweeter 20 mm (0.8 in.)
BUY NOW
AUDISON Prima Line - 6.5 AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Component Speakers... $374.99
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. Technical Specs LF Woofer Size 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 100 W Frequency Response 60 ÷ 20k Voice Coil Diameter 32 mm (1.26 in) Magnet Size 85 x 40 x 15 Crossover Level Adjustment +2; 0 Technical Specs HF Tweeter Size 26 mm (1 in) Voice Coil Diameter 20 mm (1.26 in) Electric-acoustic Specs LF Re 3.1 Ohm Fs 80 Hz Mms 12 g Cms 0.31 BL 4.7 Qms 4.7 Qts 0.7 Vas 7.6 l Le 0.23 mH Spl 93.5 dB Xmax 2.5 mm (0.1 in) Kit Tech Data Crossover Hi-Pass HP @ 3,5 kHz - 6 dB Oct Cone Diameter 129 mm General Weight Woofer 0.78 kg Weight Tweeter 0.04 kg
BUY NOW
AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" 2-Way 2 Ohm Component Speakers... $524.99
6.5″ 2-Way Component Speakers The Audison Prima APK 165 2 ohm system features 2 crossovers dedicated to woofer and tweeter and separated, to ease the installation. APCX WF ohm2 crossover shapes AP 6.5 ohm2s frequency response to match it optimally with AP 1 tweeter; it also employs a Low ESR inductor, essential to maximize the power transfer to the 2 ohm coil. APCX TW ohm2 tweeter crossover, instead, is provided with the Hi-Contour function, to enhance the high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer. Features: 2 Ω impedance, to fully exploit the 65 W power per channel at 2 Ω of the AP8.9-bit amplifier. 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range. 25 mm mobile voice coil to maximize efficiency achieving 95 dB. 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels. APCX WF 2Ω dedicated woofer crossover with low-loss voice coils to shape the frequency response for an optimal match with the tweeter. APCX TW 2Ω tweeter crossover featuring the Hi-Contour function to enhance high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer. AP 1 tweeter with an acoustic lens designed to balance the frequency response in the 10kHz 13kHz range, to optimize the product’s acoustic emission in critical OEM placements, where the product performance is affected by the presence of the factory grille. Connection cable integrated into the passive crossover and terminated with fast-on connectors conforming to OEM integration. The terminations, which are different at each of the two poles, eliminate any possible connection errors, speeding up the installation process and making it safe over time. AP 6.5 2Ω woofer featuring water-repellent treated paper cone, with profile developed with FEM simulation technology and optimized with Klippel Scan Vibrometer. Woofer with reduced mounting depth, providing ease of installation in OEM placements. Woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion. Woofer with compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system. Woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits. Developed with the KLIPPEL suite. Specifications: Woofer Size: 165 mm Tweeter Size: 26 mm Woofer Voice Coil Diameter: 25 mm Tweeter Voice Coil Diameter: 20 mm Crossover Type: Cut Off @ 4.5 / 5 kHz Magnet Size Woofer: 85 x 32 x 15 Power Handling – Peak: 300 W Power Handling – Continuous: 100 W Impedance: 2 Ohm Frequency Response: 50 ÷ 20k Crossover Cut Off: @ 4.5 / 5 kHz Adjustment Tweeter Level: +2; 0 Woofer Cone Diameter: 127 mm Xmax Woofer: 2.8 mm
BUY NOW
AUDISON Prima Line - 5X7
AUDISON Prima Line - 5X7" 2-Way 4 Ohm Component Speaker... $469.99
APK 570 systems is ideal for car models with doors equipped to house elliptical speakers featuring 5×7 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 570.The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier.The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients.The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact. Specs Comp 2 way System Size 5 x 7 in. Woofer 26 mm (1 in.) Tweeter 46,5 x 37,5 x 20,1 mm (1.83 x 1.47 x 0.8 in.) Crossover Power Handling 100 W Continuous Power 300 W Peak Power Impedance 4 Ω Frequency Response 55 – 20k Hz Sensitivity 93,5 dB/Spl
BUY NOW
AUDISON Prima Line - 6X9 AUDISON Prima Line - 6X9
AUDISON Prima Line - 6X9" 2-Way 4 Ohm Component Speaker... $469.99
APK 690 - KIT 2Way AP 1+AP 690+XOVERAPK 690 systems are ideal for car models with doors equipped to house elliptical speakers, featuring 6×9 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 690. The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation. The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.Tweeter -• 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.• Acoustic lens designed to compensate for the in-car frequency response in the 10kHz - 13kHz bandwidth caused by critical OEM placements.Woofer -• 25 mm pure copper voice coil, for high power handling and outstanding low frequency control.• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.• Reduced mounting depth, providing ease of installation in OEM placements.• “Triple Wave” surround profile for maximum excursion linearity.• Compact basket, protected by abrasion-resistant and scratchproof coating, the motor affixed with damping epoxy adhesive.• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. Attribute Details Brand Audison Condition NEW Type Component Fitment Size 6x9 Component Set with 1in Tweeter Power Handling (RMS / Continuous) 100W Power Handling (Peak) 300W RMS Wattage Per Speaker 250 Impedance 4 Ohms Frequency Response 40 – 20k Hz Sensitivity 95 dB/SPL Manufacturer SKU 69051090 UPC 8018823129695 ASIN B07V7FRS4P Bundle No Shipping Free 2-Day Shipping Weight 6.39 lbs
BUY NOW
AUDISON Prima Line - 1 AUDISON Prima Line - 1
AUDISON Prima Line - 1" Tweeter And Crossover Component -... $189.99
The AP 1 tweeter features a 26 mm diameter emission diaphragm, an acoustic lens designed to compensate for the frequency response within the 10kHz 13kHz range, a Neodymium REN magnet and extremely small sized dedicated passive crossover. Specs Comp TweeterSize 26 mm (1")Power Handling Hi-pass filtered 3.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance 4Frequency Response 2k 20k HzSensitivity 93 dB/SplMagnet Neodymium
BUY NOW
AUDISON Prima Line - 1
AUDISON Prima Line - 1" Tweeter And Crossover Component -... $249.99
The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:1. OEM, for an easy and correct factory placement2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations3. Spoke grille: for maximum acoustic performance with a-pillar installationsThanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:1. Watch band2. Double-angle cup3. Flush Mounting Ring4. Metal mounting springTechnical SpecificationsSize: 29 mm (1.14″)Power Handling: Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance: 8 ΩFrequency Response: 1,2 ÷ 25 kHzCrossover name: APCX P 2TCrossover Type: High Pass, 4kHz, 12 dB/oct.Crossover adjustment: Tweeter Level: 0 / +3 dBSensitivity: 92 dB/SplMagnet: NeodymiumTweeter Voice Coil Ø: 25 mm (1″)Dome: Tetolon fibre
BUY NOW
AUDISON Prima Line - 2
AUDISON Prima Line - 2" Wide Range Component Pair With... $239.99
Prima AP 2 MV wide range car audio reproduces the entire range of mid and high frequencies and is perfect for installation in GM, Ford and Toyota vehicles with 50mm (2 in.) OEM placements in the dashboard or A-pillar, where it is combined with an elliptical woofer in the car door. The provided adapter allows direct OEM replacement for many General Motors, Toyota and Mercedes vehicles. The compact size and excellent electroacoustic parameters make it ideal also to be used as a midrange in 3-way systems, as a surround speaker or as a central channel, housed in OEM placements, where the space requirements would not allow the use of a speaker with a larger diameter. Specification     Comp: Wide range Size: 50mm (2") Power Handling: 25W Continuous Power 50W Peak Power Impedance: 4 Ohm Frequency Response: 150 - 20k Hz Sensitivity: 84 dB/Spl Magnet: Neodymium Dome: Aluminium Features     Ultra-wide frequency response ranging from 150 Hz to 20 kHz allowing the entire virtual stage to be concentrated on the top side of the dashboard 25 mm (1 in.) CCAW double layer coil for excellent power handling and low frequency extension Powerful magnetic assembly made of a symmetrical double Neodymium magnet for optimal excursion control Aluminium cone and copper shorting ring for a high frequency response up to 20 kHz Ultra-compact design, thanks to the specifically designed basket and neodymium motor, to facilitate dashboard and A-pillar OEM installations Provided adapter for direct OEM replacement to suit many General Motors, Toyota and Mercedes vehicles
BUY NOW
AUDISON Prima Line - 6.5 AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" Woofer Component Pair (Ap 6.5) $189.99
AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don't employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R & amp;D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs Nominal diameter 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Sensitivity 93.5 dB Frequency Response 60 ÷ 5k Hz Voice Coil Ø 32 mm Magnet size D x d x h 85 x 40 x 15 mm (3.35 x 1.57 x 0.59 in) Xmax 2.5 mm (0.1 in) Electric-acoustic Specs Re 3.1 Ohm Fs 80 Hz Le 0.23 mH Vas 7.6 l (0.268 ft) Mms 12 g (0.423 oz) Cms 0.31 mm/N BL 4.7 T•m Qts 0.7 Qes 0,8 Qms 4.7 General Weight 0.78 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 60 mm (2.36 in) Dimension D 56 mm (2.2 in)
BUY NOW
AUDISON Prima Line - 6.5 AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" Woofer Component Pair (Ap 6.5P) $249.99
AP 6.5P woofer component has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency featuring a very wide excursion to cope with the most important dynamic peaks without any compression. Its impressive magnetic assembly provides the energy needed for perfect control even during limit excursions. The CCAW (Copper Clad Aluminium Wire) voice coil (32 x 14 mm, 1.25 x 0.55 in) optimally manages the greater applied power. The basket was completely redesigned with the aid of simulations to lower the resistance of air flows, while maintaining compact sizes to facilitate the installation. Technical Specs Nominal diameter 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 330 W Power Handling - Continuous 110 W Sensitivity 92.5 dB Frequency Response 50 - 5k Hz Voice Coil Ø 32 mm Magnet size D x d x h 100 x 40 x 18 mm (3.94 x 1.57 x 0.71 in) Voice Coil Material CCAW Cone Material WATER-REPELLENT TREATED PAPER CONE Xmax 5.6 mm (0.22 in) Electric-acoustic Specs Re 3.1 Ohm Fs 60 Hz Le 0.29 mH Vas 11.4 l (0.403 ft) Mms 14.6 g (0.515 oz) Cms 0.47 mm/N BL 5.35 T•m Qts 0.55 Qes 0,6 Qms 7.6 General Weight 1.45 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 75 mm (2.95 in) Dimension D 66.5 mm (2.62 in)
BUY NOW
AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" Woofer Component Pair (Ap 6.5... $279.99
AP 6.5 Ω2 woofer has been developed with 2Ω nominal impedance with the purpose of exploiting all the power made available by the AP8.9 bit amplifier capable of 65W into a 2Ω load. To maximize the woofer efficiency achieving 95 dB, a 25 mm diameter 10 mm winding height coil, so a more lightweight coil, has been employed, at the same time also providing a linear excursion 2.8 mm higher than the one of AP 6.5 (4Ω), therefore ensuring high SPL values with minimum distortion even at high listening levels. To extend the woofer’s frequency range down to low frequencies up to 50 Hz a 75 Hz resonance frequency has been chosen, achieving excellent low frequency output even without the use of a subwoofer. Product information Mounting Type Car Mount Model Name AP6.5 Prima Speaker Type Woofer Recommended Uses For Product For Surround Sound Systems Compatible Devices Laptop, Desktop Subwoofer Diameter 6.5 Inches Surround Sound Channel Configuration 2.0 Color Black Product Dimensions 6.5"D x 6.5"W x 6.5"H Item Weight 5 Pounds Impedance 2 Ohms Is Waterproof FALSE Warranty Type Limited Number of Items 2 Control Method Touch Speaker Size 6.5 Inches Power Source Corded Electric Woofer Diameter 6.5 Inches Customer Package Type FFP Audio Driver Type Dynamic Driver Audio Driver Size 6.5 Inches Subwoofer Connectivity Technology Wired UPC 714998932419 Manufacturer Audison Item Weight 5 pounds ASIN B08MR1DLJG Item model number AP6.5-Prima
BUY NOW
AUDISON Prima Line - 6X9 AUDISON Prima Line - 6X9
AUDISON Prima Line - 6X9" Woofer Component Pair (Ap 690) $314.99
AP 690 is ideal for car models with doors equipped to house elliptical speakers. The R & amp;D team optimized the electro-acoustic parameters for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.
BUY NOW
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4E) AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4E)
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4E) $469.99
The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front or the upgrade of the rear system. The 100 mm (4 in.) APBMW X4E, with basket and fixing screws dedicated to the specific car model, feature a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties, offers optimized dispersion features for OEM placement, elevating the sound stage to a realistic level. Technical Specs LF Woofer Size 100 mm Impedance 4 Ohm Power Handling - Peak 80 W Power Handling - Continuous 40 W Sensitivity 88 dB Frequency Response 100 ÷ 22k Voice Coil Diameter 25 mm (0.79 in) Magnet Size 50 x 29 x 3 Xmax 0.5 mm (0.98 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 20 mm (0.79 in) Electric-acoustic Specs Re 3.4 Ohm Fs 100 Hz Mms 5.8 g (0.2 oz) Cms 0.5 Bl 5.4 Qms 6.2 Qes 0,4 Qts 0.38 Vas 1.8 l (0.06 ft) LE 0.32 mH General Weight 0.5 kg Dimensions Dimension A 119 mm (4.69 in) Dimension A3 143 mm Dimension B 100 mm (3.94 in) Dimension C 67.5 mm (2.66 in) Dimension D 39 mm (1.54 in)
BUY NOW
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4M) AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4M)
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4M) $469.99
The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front of the upgrade of the rear system. The 100 mm (4 in.) APBMW X4M, with basket and fixing screws dedicated to the specific car model, features a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties offer optimized dispersion features for OEM placement, elevating the sound stage to a realistic level. Technical Specs LF Woofer Size 100 mm Impedance 4 Ohm Power Handling - Peak 80 W Power Handling - Continuous 40 W Sensitivity 88 dB Frequency Response 100 ÷ 22k Voice Coil Diameter 25 mm (0.79 in) Magnet Size 50 x 29 x 3 Xmax 0.5 mm (0.98 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 20 mm (0.79 in) Electric-acoustic Specs Re 3.4 Ohm Fs 100 Hz Mms 5.1 g (0.18 oz) Cms 0.53 Bl 5 Qms 7.1 Qes 0,42 Qts 0.4 Vas 1.9 l (0.07 ft) LE 0.32 mH General Weight 0.4 kg Dimensions Dimension A 102 mm (4.02 in) Dimension B 91 mm (3.58 in) Dimension C 63.5 mm (2.5 in) Dimension D 44.5 mm (1.75 in)
BUY NOW
AUDISON Prima Line - 4 AUDISON Prima Line - 4
AUDISON Prima Line - 4" 2-Way 4 Ohm Coaxial Speakers... $229.99
APX 4 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The 4³ cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 100 mm Impedance 4 Ohm Power Handling - Peak 120 W Power Handling - Continuous 40 W Sensitivity 91 dB Frequency Response 80 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 75 x 40 x 10 Xmax 1.3 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 125 Hz Mms 5.3 g (0.19 oz) Cms 0.3 Bl 3.2 Qms 8 Qes 1,2 Qts 1 Vas 1.5 l (0.05 ft) LE 0.04 mH General Weight 0.49 kg Dimensions Dimension A 102 mm (4.02 in) Dimension A3 130 mm Dimension B 93 mm (3.66 in) Dimension C 43 mm (1.69 in) Dimension D 41 mm (1.61 in)
BUY NOW
AUDISON Prima Line - 5 AUDISON Prima Line - 5
AUDISON Prima Line - 5" 2-Way 4 Ohm Coaxial Speakers... $229.99
APX 5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The 5" cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 130 mm (5 in) Impedance 4 Ohm Power Handling - Peak 150 W Power Handling - Continuous 50 W Sensitivity 93 dB Frequency Response 70 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 13 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 90 Hz Mms 8.2 g (0.29 oz) Cms 0.33 Bl 4.6 Qms 10.6 Qes 0,75 Qts 0.7 Vas 3.8 l (0.13 ft) LE 0.07 mH General Weight 0.74 kg Dimensions Dimension A 130 mm (5.12 in) Dimension A3 150 mm Dimension B 119 mm (4.69 in) Dimension C 51 mm (2.01 in) Dimension D 48 mm (1.89 in)
BUY NOW
AUDISON Prima Line - 5X7 AUDISON Prima Line - 5X7
AUDISON Prima Line - 5X7" 2-Way 4 Ohm Coaxial Speakers... $259.99
APX 570 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter. The 5x7" cones surround features an exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 570 mm Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Elliptical Size 5 x 7 Sensitivity 93 dB Frequency Response 60 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 15 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 70 Hz Mms 12 g (0.42 oz) Cms 0.4 Bl 4.2 Qms 8.4 Qes 0,9 Qts 0.8 Vas 12.5 l (0.44 ft) LE 0.12 mH General Weight 0.885 kg Elliptical B1 182 mm Elliptical B2 126 mm Elliptical Dimension A1 221 mm Elliptical Dimension A2 140 mm Dimensions Dimension A1 221 mm Dimension A2 140 mm Dimension C 67 mm (2.64 in) Dimension D 63 mm (2.48 in) Dimension B1 182 mm Dimension B2 126 mm
BUY NOW
AUDISON Prima Line - 6.5 AUDISON Prima Line - 6.5
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Coaxial Speakers... $229.99
APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Frequency Response 60 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 15 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Sensitivity 94 dB Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 80 Hz Mms 11.5 g (0.41 oz) Cms 0.33 Bl 4.6 Qms 5.4 Qes 0,84 Qts 0.73 Vas 8.1 l (0.29 ft) LE 0.1 mH General Weight 0.87 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 60 mm (2.36 in) Dimension D 57 mm (2.24 in)
BUY NOW
AUDISON Prima Line - 6X9 AUDISON Prima Line - 6X9
AUDISON Prima Line - 6X9" 3-Way 4 Ohm Coaxial Speakers... $259.99
The APX 690 features an exclusive 40 mm horn loading dome tweeter that contributes to maximize efficiency up to 96dB SPL and an acoustics lens specifically designed and applied to the tweeter to increase dispersion in the high frequency range.To strengthen the emission of very high frequency ranges otherwise affected by off-axis positioning compared to the listening point, the APX 690 featuring a supertweeter. Technical Specs LF Woofer Size 690 mm Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 100 W Elliptical Size 6 x 9 Sensitivity 96 dB Frequency Response 40 - 23k Voice Coil Diameter 25 mm (0.79 in) Magnet Size 90 x 32 x 15 Xmax 3.5 mm (0.98 in) Technical Specs HF Tweeter Size 40 mm (1.57 in) Voice Coil Diameter 20 mm (0.79 in) Super Tweeter Size 15 Electric-acoustic Specs Re 3.2 Ohm Fs 60 Hz Mms 16.6 g (0.59 oz) Cms 0.5 Bl 5.3 Qms 6.7 Qes 0,7 Qts 0.6 Vas 36 l (1.27 ft) LE 0.2 mH General Weight 1.225 kg Elliptical B1 222 mm Elliptical B2 151 mm Elliptical Dimension A1 238 mm Elliptical Dimension A2 162 mm Dimensions Dimension A1 238 mm Dimension A2 162 mm Dimension C 96 mm (3.78 in) Dimension D 81 mm (3.19 in) Dimension F 25 Dimension B1 222 mm Dimension B2 151 mm Dimension E1 276 mm Dimension E2 202 mm
BUY NOW
AUDISON Prima Line - 5 AUDISON Prima Line - 5
AUDISON Prima Line - 5" 4 Ohm Woofer Component -... $189.99
AP 5 features a 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control. All the woofers don't employ any filter, to maximize efficiency: the dome profile has been optimized with Klippel Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs Nominal diameter 130 mm (5 in) Impedance 4 Ohm Power Handling - Peak 150 W Power Handling - Continuous 50 W Sensitivity 93 dB Frequency Response 70 ÷ 5k Hz Voice Coil Ø 32 mm Magnet size D x d x h 85 x 40 x 13 mm Xmax 2 mm (0.08 in) Electric-acoustic Specs Re 3.1 Ohm Fs 90 Hz Le 0.25 mH Vas 4 l (0.141 ft) Mms 9 g (0.317 oz) Cms 0.34 mm/N BL 4.6 T•m Qts 0.68 Qes 0,74 Qms 8 General Weight 0.65 kg Dimensions Dimension A 130 mm (5.12 in) Dimension A3 150 mm Dimension B 119 mm (4.69 in) Dimension C 51.5 mm (2.03 in) Dimension D 48.5 mm (1.91 in)
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 4 Ohm Woofer Component -... $325.00
For the vehicles equipped with an 8 inch woofer as standard OEM component, the Audison Technical Department developed the AP 8 which, also thanks to the wide emission surface, provides higher energy in the low frequency range, ensuring excellent performance when the use of a subwoofer is prohibited due to space limitations. Technical Specs Nominal diameter 200 mm (8 in) Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 100 W Sensitivity 93.5 dB Frequency Response 35 ÷ 3k Hz Voice Coil Ø 25 mm Magnet Material HIGH DENSITY FLUX FERRITE Magnet size D x d x h 90 x 40 x 17 mm Xmax 3.3 mm (0.13 in) Electric-acoustic Specs Re 3.1 Ohm Fs 60 Hz Le 0.3 mH Vas 20 l (0.706 ft) Mms 19 g (0.67 oz) Cms 0.35 mm/N BL 5.4 T•m Qts 0.7 Qes 0,8 Qms 5 General Weight 1.2 kg Dimensions Dimension A 209 mm (8.23 in) Dimension B 174 mm (6.85 in) Dimension C 70 mm (2.76 in) Dimension D 66 mm (2.6 in)
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 300W 2 Ohm Subwoofer To... $469.99
The 200 mm (8 in.) APBMW S subwoofers allow a direct replacement of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. The Neodymium magnet allows for greater power and control than ferrite while maintaining the depth of installation unaltered. Technical Specs Nominal diameter 200 mm (8 in) Impedance 2 Ohm Power Handling - Peak 300 W Power Handling - Continuous 150 W Sensitivity 91 dB Frequency Response 40-500 Hz Voice Coil Ø 50 mm Chassis Material PLASTIC Magnet Material NEODYMIUM Magnet size D x d x h 48x18x7 mm mm Voice Coil Material COPPER Former Material ALUMINIUM Cone Material PRESSED PAPER CONE Surround Material RUBBER Xmax 7 mm (0.28 in) Xmech 10 mm (0.39 in) Driver Displacement Volume 1.2 l (0.042 ft) Electric-acoustic Specs D 198.6 cm² (30.783 in²) Re 2.2 Ohm Fs 40 Hz Le 0.3 mH Vas 22.3 l (0.788 ft) Mms 42 g (1.482 oz) Cms 0.4 mm/N BL 5.6 T•m Qts 0.5 Qes 0,67 Qms 2.1 Reference Efficiency 0.18
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 300W 4 Ohm Subwoofer To... $469.99
The 200 mm (8 in.) APBMW S subwoofers allow a direct replacement of the OEM speakers underneath the front seats, making the most of the factory acoustic load and generating deep and crisp low frequencies. The Neodymium magnet allows for greater power and control than ferrite while maintaining the depth of installation unaltered.
BUY NOW
AUDISON Prima Line - 10 AUDISON Prima Line - 10
AUDISON Prima Line - 10" 800W 4 + 4 Ohm... $344.99
The APS 10 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice-coil and single voice coil versions feature push connectors for ease of wiring and configurations. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Technical Specs Nominal diameter 250 mm (10 in) Impedance 4+4 Ohm Power Handling - Peak 800 W Power Handling - Continuous 400 W Sensitivity 84 dB Voice Coil Ø 60 mm Magnet Material HIGH DENSITY FLUX FERRITE Magnet size D x d x h 140 x 70 x 30 mm Cone Material WATER REPELLENT PRESSED PAPER Xmax 12.6 mm (0.5 in) Xmech 18 mm (0.71 in) Driver Displacement Volume 1.12 l (0.04 ft) Electric-acoustic Specs Re 2.2 Ohm Fs 27 Hz Le 1.5 mH Vas 41 l (1.448 ft) Mms 170 g (5.997 oz) Cms 0.2 mm/N BL 10.4 T•m Qts 0.52 Qes 0,58 Qms 4.7 General Weight 5.24 kg Dimensions Dimension A 270 mm (10.63 in) Dimension B 233 mm (9.17 in) Dimension C 105 mm (4.13 in) Dimension D 88 mm (3.46 in) Dimension C1 119 mm
BUY NOW
AUDISON Prima Line - 10 AUDISON Prima Line - 10
AUDISON Prima Line - 10" 800W 4 Ohm Subwoofer (Aps... $344.99
Prima compact subwoofer family expands with the introduction of the new 25 cm (10 in.) APS 10 S4S, optimized for enclosures with a reduced volume starting from 10 liters. The configuration of the single 4 ohm voice coil makes it ideal to be driven by the new AP F8.9 bit amplifier with built-in DSP that delivers an outstanding 260 W RMS with two channels bridged. Also interesting is the possibility to create custom enclosures with two APS 10 S4S driven by the AF M1D amplifier using the 540 W RMS delivered on the 2 ohm load resulting from the drivers connection in parallel. Technical Specs Nominal diameter 250 mm (10 in) Impedance 4 Ohm Power Handling - Peak 800 W Power Handling - Continuous 400 W Sensitivity 83.5 dB Voice Coil Ø 60 mm Magnet Material HIGH DENSITY FLUX FERRITE Magnet size D x d x h 140 x 70 x 30 mm Cone Material WATER REPELLENT PRESSED PAPER Xmax 12.6 mm (0.5 in) Xmech 18 mm (0.71 in) Driver Displacement Volume 1.12 l (0.04 ft) Electric-acoustic Specs Re 3.7 Ohm Fs 28.5 Hz Le 1.9 mH Vas 39.62 l (1.399 ft) Mms 160 g (5.644 oz) Cms 0.2 mm/N BL 12.9 T•m Qts 0.68 Qes 0,75 Qms 6.9 General Weight 5.24 kg Dimensions Dimension A 270 mm (10.63 in) Dimension B 233 mm (9.17 in) Dimension C 105 mm (4.13 in) Dimension D 88 mm (3.46 in) Dimension C1 119 mm
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 500W 4 + 4 Ohm... $304.99
The APS 8 D is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes from 7.5 lt. to 8.5 lt. It features push connectors for ease of wiring and configurations and has been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Technical Specs Nominal diameter 200 mm (8 in) Impedance 4+4 Ohm Power Handling - Peak 500 W Power Handling - Continuous 250 W Sensitivity 83.5 dB Magnet Material HIGH DENSITY FLUX FERRITE Magnet size D x d x h 120 x 50 x 28 mm Cone Material WATER REPELLENT PRESSED PAPER Xmax 8.8 mm (0.35 in) Xmech 16.5 mm (0.65 in) Voice Coil Winding Height 40 mm (1.57 in) Driver Displacement Volume 0.67 l (0.024 ft) Electric-acoustic Specs Re 2.1 Ohm Fs 30 Hz Le 1.1 mH Vas 25.5 l (0.901 ft) Mms 85 g (2.998 oz) Cms 0.3 mm/N BL 8.8 T•m Qts 0.44 Qes 0,46 Qms 5.1 General Weight 3.1 kg Dimensions Dimension A 222 mm (8.74 in) Dimension B 187 mm (7.36 in) Dimension C 94.6 mm (3.72 in) Dimension D 79 mm (3.11 in) Dimension C1 104 mm
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 500W 4 Ohm Subwoofer (Aps... $304.99
With the aim of providing high acoustical output even when used with lower power, the APS 8 R was designed for use in an 8.5-litres reflex enclosure, with tuning between 30 and 40Hz. The APS 8 R has been specifically developed to be combined with either the AF C8.14 bit or AF C4.10 bit / AF C4D / AF M4D. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dustcap-basket geometry which guarantees large excursion of the mobile group, while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the rocking-mode phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom-plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Technical Specs Nominal diameter 200 mm (8 in) Impedance 4 Ohm Power Handling - Peak 500 W Power Handling - Continuous 250 W Sensitivity 84 dB Voice Coil Ø 40 mm (1.6 in) Magnet Material HIGH DENSITY FLUX FERRITE Magnet size D x d x h 120 x 50 x 28 mm Cone Material WATER REPELLENT PRESSED PAPER Xmax 8.8 mm (0.35 in) Xmech 16.5 mm (0.65 in) Driver Displacement Volume 0.67 l (0.024 ft) Electric-acoustic Specs Re 3.7 Ohm Fs 32 Hz Le 1.45 mH Vas 26.5 l (0.936 ft) Mms 80 g (2.822 oz) Cms 0.33 mm/N BL 11.5 T•m Qts 0.41 Qes 0,43 Qms 5.1 General Weight 3.04 kg
BUY NOW
AUDISON Prima Line - Oem Harness (Apbmw Biamp2)
AUDISON Prima Line - Oem Harness (Apbmw Biamp2) $279.99
APBMW BIAMP 2 Plug & Play T-harness provides the ability to:1. Take the front speaker output signal from the OEM head unit through the under-seat woofer connector and route it to the AP bit amplifier input.2. Separately route the signal from the AP bit amplifier outputs to the front midrange housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables.The APBMW BIAMP 2 is compatible only with BMW and MINI vehicles that are not provided with an OEM amplifier. The package contains a pair of cables, for left and right channels. The cables are 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed.
BUY NOW
AUDISON Prima Line - 10 AUDISON Prima Line - 10
AUDISON Prima Line - 10" 800W 0.16 Ohm Active Loaded... $1,049.99
The Prima APBX 10 AS2 active subwoofer, with the 10-inch driver, features a dedicated high-performance amplification module that enhances all the passive box technologies, such as the 2S²(2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 400W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the he-li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes. Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance (0.16 ohms for APBX 10 AS). This feature ensures a perfect synergy with the he-li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers, and sealed box, to obtain low, powerful, and crisp frequencies. The controls section is complete and provides optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum. The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after-market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source remote signal, by the voltage variation on the high-level input, or by the audio signal on both inputs. Phase control (0-180°) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely. Technical Specs Nominal diameter 250 mm Power Handling - Peak 800 W Power Handling - Continuous 400 W Magnet Material HIGH DENSITY FLUX FERRITE Cone Material WATER REPELLENT PRESSED PAPER Dimensions Dimension A 440 mm Dimension B 334 mm Dimension C 135 mm Dimension D 158 mm
BUY NOW
AUDISON Prima Line - 10 AUDISON Prima Line - 10
AUDISON Prima Line - 10" 800W 4 + 4 Ohm... $574.99
The APBX 10 DS, a 10 subwoofer loaded in a 12-liter sealed enclosure, is the flagship. It is dedicated to the highest-performing Forza systems, using the AF M1D amplifier for the sub-section. The speaker's mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele & Small parameters set-up provides the ideal balance for all music genres. Technical Specs Nominal diameter 250 mm Impedance 4+4 Ohm Power Handling - Peak 800 W Power Handling - Continuous 400 W Magnet Material HIGH DENSITY FLUX FERRITE Cone Material WATER REPELLENT PRESSED PAPER Dimensions Dimension A 470 mm Dimension B 334 mm Dimension C 120 mm Dimension D 142 mm
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 500W 0.4 Ohm Active Loaded... $889.99
The Prima APBX 8 AS2 active subwoofer, with the 8-inch driver, features a dedicated high-performance amplification module that enhances all the passive box technologies, such as the 2S² (2 Sides / 2 Sounds) design, the Plug & Play terminal block and ultra-compact size. The amplification module, with power outputs of 250W RMS, is developed with he-li technology (high efficiency / low impedance), which thanks to the absence of the DC-DC voltage booster reaches the impressive 90% efficiency level, very close to the theoretical limit of the D-Class. New input stage DBT (Dynamic Bass Tracking) technology allows 100% use of the He-Li (High-Efficiency Low Impedance) amplifier power and to enjoy a tense and dynamic bass even at very high listening volumes. Eliminating the voltage booster was made possible thanks to the development of the new dual coil drivers, which inherit all the technological background of the Prima subwoofers, but differ for the ultra-low impedance. This feature ensures a perfect synergy with the He-Li (High-Efficiency Low Impedance) technology, maximizing the combination of amplifier, speakers, and sealed box, to obtain low, powerful, and crisp frequencies. The controls section is complete and provides an optimal regulation of the low-frequency emission in the car cabin. The Butterworth low pass filter at 12dB/Oct. with variable cut-off frequency (50-200 Hz) can be bypassed when used with an AP bit processor with pre-out output dedicated to the sub. The adjustable bass-boost control (0 ÷ 6 dB) at 45 Hz allows the user to emphasize the response on the lower side of the spectrum. The high-level speaker-in input on the multi-pole connector eases the integration with OEM audio systems while the low-level input on RCA is dedicated to the connection with after-market sources. The subwoofer automatic turn on/off function ART (Automatic Remote Turn-On) can be configured to be controlled by the source remote signal, by the voltage variation on the high-level input, or by the audio signal on both inputs. Phase control (0 - 180°) completes the equipment. The SSP (Sub Smart Plug) terminal block is provided with a single Plug&Play connector to be able to disconnect the box easily and safely. Technical Specs Nominal diameter 200 mm Power Handling - Peak 500 W Power Handling - Continuous 250 W Magnet Material HIGH DENSITY FLUX FERRITE Cone Material WATER REPELLENT PRESSED PAPER Dimensions Dimension A 368 mm Dimension B 294 mm Dimension C 135 mm Dimension C1 158 mm
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 500W 4 + 4 Ohm... $469.99
The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AF M5.11 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AF C8.14 bit/AF M8.14 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass. Technical Specs Nominal diameter 200 mm Impedance 4+4 Ohm Power Handling - Peak 500 W Power Handling - Continuous 250 W Magnet Material HIGH DENSITY FLUX FERRITE Cone Material WATER REPELLENT PRESSED PAPER Dimensions Dimension A 374 mm Dimension B 334 mm Dimension C 109 mm Dimension D 131 mm
BUY NOW
AUDISON Prima Line - 8 AUDISON Prima Line - 8
AUDISON Prima Line - 8" 500W 4 Ohm Passive Loaded... $469.99
The APBX 8 R loaded enclosure was developed with reflex loading, with tuning designed to concentrate SPL in the lowest frequency range. The aim was to exploit the natural boost in output found in most cars below 60 Hz known as cabin gain. The 8-inch single 4 ohm voice-coil subwoofer has a powerful motor that maximizes efficiency. The low-resonant frequency of the subwoofer, matched to the reflex enclosure keeps excursion low within the entire audio spectrum, allowing also the use with a pair of AF C4.10 bit/AF C4D/AF M4D  bridged channels, capable of delivering 260 W rms. Technical Specs Nominal diameter 200 mm Impedance 4 Ohm Power Handling - Peak 500 W Power Handling - Continuous 250 W Magnet Material HIGH DENSITY FLUX FERRITE Cone Material COTTON-FIBRE PRESSES PAPER CONE Dimensions Dimension A 470 mm Dimension B 334 mm Dimension C 109 mm Dimension D 131 mm Dimension C1 131 mm
BUY NOW
AUDISON Audison 10
AUDISON Audison 10" 800W Slimline Loaded Subwoofer Box-SB10SA1 $399.99
The Audison SB10SA1 is a great option for adding powerful bass to your car audio system. This sealed Aerpro 10″ Loaded Slimline Subwoofer Box is designed to save space, with dimensions of 341mm (H) x 485mm (W) and a tapered depth of 85mm to 135mm, making it easy to install in most vehicles. With an internal volume of 11.31 litres and a 232mm mounting cutout, it provides an ideal setup for clean, punchy bass. The APS10D 800W Subwoofer used is designed to deliver maximum performance in a sealed enclosure with ultra-compact volumes, from 10 lt. to 12 lt. The dual voice coil features push connectors for ease of wiring and configuration. Prima subwoofer components have been developed with a primary goal: to deliver high output in tight spaces. Output is a matter of excursion; the more air the cone moves, the more output. However, reduced mounting depth traditionally has meant low excursion. Prima subwoofers employ a special cone-dust cap-basket geometry which guarantees large excursion of the mobile group while keeping the mounting depth to a minimum. The surround and spider have been carefully designed to prevent the “rocking – -mode” phenomenon. The cooling circuit has been designed with air vents on the basket underneath the spider, eliminating the need for vents on the bottom – plate. This allows the subwoofer to be mounted close to the back wall of the enclosure, making the most of the reduced mounting depth. Please Note: The slimline subwoofer box used is the Aerpro SB10S and is not made by Audison. Features: Fits easily in most vehicles without taking up too much space, thanks to its slimline dimensions and tapered depth. Sealed Enclosure Enhances sound clarity and delivers tight, punchy bass for a more precise audio experience. Durable 12mm MDF Construction ensures long-lasting performance while minimising vibrations for better sound quality. Spring-Loaded Banana Socket Terminals allow quick, secure, and hassle-free wiring connections. Black Carpet Finish blends seamlessly with most car interiors while protecting the enclosure from scratches and wear. Specially designed cone, dust cap, and basket geometry ensure long linear excursion capability (11mm, One Way) keeping mounting depth to a minimum. Air vents on the basket underneath the spider, eliminating the need for the central pole vent allowing mounting close to rear wall of enclosure. Massive motor assembly, optimized with FEM (Finite Element Modelling) for perfect control under high power, high excursion conditions. Water-repellent pressed paper 10-inch cone, featuring a profile developed with FEM simulation and optimized with the Klippel Scan Vibrometer. Designed and engineered to deliver exceptional performance in a sealed enclosure, ensuring powerful bass and precise sound reproduction. A steel mesh grille and plastic gasket are integrated to protect the subwoofer, ensuring durability and safeguarding against damage. Specifications: Type: Sealed Enclosure Power Handling – MAX: 800W Power Handling – RMS: 400W Impedance: 2-Ohm Voice Coil: Dual (4 + 4) Volume: 11.31 Litres Construction: 12mm MDF Carpet Colour: Black Terminals: Spring-Loaded Banana Sockets Dimensions: (H)  341mm x (W) 485mm x Top (D) 85mm x Bottom (D) 135mm Weight: 9.80kg
BUY NOW
AUDISON Prima Line - 2.6M Ap Bit Input Harness (Ap 260P&P I/O)
AUDISON Prima Line - 2.6M Ap Bit Input Harness (Ap... $314.99
Audison AP 260P&P I/O - ISO EXTENSION IN/OUT 260CM/102IN CONNECTION CABL
BUY NOW
AUDISON Prima Line - 5.6M Ap Bit Input Harness (Ap 560P&P I/O)
AUDISON Prima Line - 5.6M Ap Bit Input Harness (Ap... $314.99
HERTZ Prima Line - 5.6M Ap Bit Input Harness (Ap 560P&P I/O)
BUY NOW
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E)
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E) $189.99
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
BUY NOW
AUDISON Prima Line - Oem Harness (Apbmw Biamp1)
AUDISON Prima Line - Oem Harness (Apbmw Biamp1) $189.99
This Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The T connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
BUY NOW
AUDISON Prima Line - Oem Harness (Apbmw Reamp 1)
AUDISON Prima Line - Oem Harness (Apbmw Reamp 1) $229.99
This Plug&Play harness allows the replacement of the OEM BMW amplifier with an Audison AP bit or AF bit amplifier on BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options and on BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system. The OEM seven-channel analog amplifier is connected via a forty-two-pin multipolar connector.   Features Compatible with BMW vehicles from 2004+ equipped with the HI-FI 676 sound system options Compatible with BMW vehicles from 2014+ equipped with 674 low level Harman-Kardon system Compatible with Audison AF bit amplifier. The use of other products may require modifications and additional connections to the vehicle Compatible with AP F8.9 bit. The AP F IN ADP adapter is required for full P&P connection. Confirm proper application: APBMW ReAMP 1, APBMW ReAMP 2 and AFBMW ReAMP 3 use identical connectors, but with different pinouts. They are not interchangeable NOTE: AP BMW ASD BYPASS may also be required in vehicles that have the optional ASD “artificial exhaust sound” feature. Not compatible with current RAM-equipped BMW models using AFBMW ReAMP3, or with MOST-equipped 677/688 systems.
BUY NOW
AUDISON Prima Line - Plug And Play Harness To Suit Bmw (Apbmw Reamp 2)
AUDISON Prima Line - Plug And Play Harness To Suit... $279.99
This Plug&Play T-Harness provides the ability to install an Audison AP F on BMW vehicles equipped with RAM module. It’s compatible with “Standard” and “Hi-Fi” sound system. The OEM seven-channel amplifier is connected via a forty-two pin multipolar connector. Features Retrieve the OEM source front and rear stereo audio signal. Route the AP FORZA amp outputs to each of the OEMamplifier seven channels:(Mid-Hi FL; Mid-Hi FR; WF FL; WF FR; RL; RR; Centre)The Plug&Play terminals enable the user to choose whichAP FORZA amplifier output to connect to each of the sevenchannels of the OEM audio system.It is also possible to bridge the outputs of the AP FORZAamplifier. Keep the OEM amplifier on. The USS1 prevent the speaker diagnostic error of the centerchannel.
BUY NOW
AUDISON Prima Line - Speaker Output Harness (Ap Spk Out 8.9)
AUDISON Prima Line - Speaker Output Harness (Ap Spk Out... $114.99
Audison AP SPK OUT 8.9 - PPRIMA Series 8-Channel, Speaker Output extension cable Plug & Play for AP8.9 bit We are a Audison authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order! What's Inside? • Audison Prima AP SPK Out 8.9 Plug&Play Connector AP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
BUY NOW
AUDISON Prima Line - Oem T-Harness (Ap T - H Bmw01)
AUDISON Prima Line - Oem T-Harness (Ap T - H... $144.99
PRIMA T-HARNESS BMW T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution. *The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system. Features Designed specifically for your vehicle For maximum OEM integration. Connection to the AP Extension cable through ISO connectors Possibility to supply power to the amplifier via the direct cockpit current system Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution). ACC wire to re-launch ignition key signal to turn on / off an external device* *In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list
BUY NOW
AUDISON Prima Line - Tower Kit To Suit Prima Amplifiers (Aptk 3) AUDISON Prima Line - Tower Kit To Suit Prima Amplifiers (Aptk 3)
AUDISON Prima Line - Tower Kit To Suit Prima Amplifiers... $209.99
APTK 3 - AUDISON PRIMA TOWER KIT 3With this optional stacking system it is possible to stack up to 3 AP amps to save space without incurring in overheating. *Does not include Amplifiers*
BUY NOW
AUDISON Prima Line - Coaxial To Toslink Converter, Aux Input For Apf8.9Bit (C2O)
AUDISON Prima Line - Coaxial To Toslink Converter, Aux Input... $304.99
The Audison C2O is a high–precision interface designed to convert both coaxial digital and analog AUX signals into a TOSLINK optical digital output. Supporting resolutions up to 24-bit / 192 kHz, the C2O ensures perfect integration between modern Hi-Res portable players, smartphones, and Audison processors equipped with an optical digital input. Thanks to its ultra-compact design, the C2O can be easily installed in hidden or tight spaces inside the vehicle, minimizing cable length and eliminating noise issues often caused by long signal paths. The C2O is the ideal solution for integrating Hi-Res audio sources into advanced Audison ecosystems, guaranteeing signal integrity, perfect compatibility, and a streamlined installation experience. Its intelligent design and premium components make it indispensable for achieving the highest sound quality in modern car audio systems Dual Input Conversion: Converts digital coax (75 Ω) and analog AUX (3.5 mm jack, including 4-pole types) into a high-quality TOSLINK optical output. High-Resolution Digital Output: From analog input: 24-bit / 48 kHz From coaxial digital input: 24-bit / 192 kHz Smart Input Management: Automatic input selection with priority to the AUX input. If no analog signal is detected, the device switches to the coaxial input after 6 seconds (adjustable to 9 or 12 seconds via internal switch). Noise-Free Signal Handling: The coaxial digital input features an isolation transformer to minimize electromagnetic interference (EMI), ensuring clean and stable signal transmission. Optimized Analog Input Stage: Integrated pre-amplifier with adjustable gain (0.1V to 2V) for perfect matching with various devices before high-quality A/D conversion. Flexible Power Supply Options: Operates from 6 to 30 VDC, with support for both classic remote turn-on and +12V REM trigger.
BUY NOW

BEST VALUE

LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and Wiring Harness LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and Wiring Harness
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and... $1,129.00 $1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation. This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade. What’s Included LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U Key Benefits Complete plug-and-play solution with no additional parts required 3 beam modes: Spot, Flood, and BEAST for versatile driving conditions Extended beam distance and wider spread for maximum visibility Heavy-duty construction designed for extreme environments Quick and easy installation with included wiring harness BEAST 230 Driving Light Features 3-mode beam operation: Spot, Flood, and BEAST mode High-output LED performance for long-range and wide visibility Optimised beam pattern for off-road and highway use 5700K colour temperature for clear, natural visibility Large format design for increased light output and coverage Daytime Running Light (DRL) functionality Heavy-duty aluminium housing for durability and heat management Wiring Harness Features Designed specifically for BEAST 3-mode driving lights True plug-and-play installation with no rewiring required Includes HB3 and H4 headlight adaptors Automatic positive and negative switching compatibility Single 8-pin connector for clean installation Includes relay, rocker switch, and mounting hardware Durability and Performance IP69K waterproof and dustproof rating Impact-resistant construction for harsh environments Operating temperature range: -40°C to 85°C Resistant to UV, salt spray, and corrosion Long-lasting LED lifespan Specifications Light Size: 230mm Voltage: 12V system compatible Colour Temperature: 5700K Designed For 4WD and off-road vehicles Touring and long-distance driving Work and utility vehicles Rural and low-light environments Why Choose LIGHTFORCE BEAST 230 Bundle This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility. Order now to upgrade your driving visibility with a complete BEAST lighting setup.  
BUY NOW
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights and Harness LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights and Harness
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights... $999.00 $1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation. Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence. What’s Included 2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1 BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U Key Benefits Complete plug-and-play lighting solution 3 beam modes: Spot, Flood, and BEAST Up to 1260m beam distance for long-range visibility Compact design with extreme durability Quick and easy installation with dedicated wiring harness BEAST 190 Driving Light Features 3-mode beam operation: Spot, Flood, and BEAST mode Up to 1 lux at 1260m (pair) for long-distance performance 25 high-performance Osram LEDs 5700K colour temperature for clear, natural visibility Compact 190mm size with ultra-slim 80mm depth Daytime Running Light (DRL) functionality Pressure die-cast aluminium housing for strength and heat dissipation Beam Modes Spot Mode: Long-distance beam up to 1195m Flood Mode: Wide beam up to 496m BEAST Mode: Combined distance and width up to 1260m Wiring Harness Features Designed specifically for BEAST 3-mode driving lights True plug-and-play installation with no rewiring required Includes HB3 and H4 headlight adaptors Automatic positive and negative switching compatibility Includes relay, switch, and mounting hardware Durability and Performance IP69K waterproof and dustproof rating IK16 impact resistance for extreme durability Operating temperature range from -40°C to 85°C Resistant to UV, salt spray, and corrosion LED lifespan up to 50,000 hours Specifications Diameter: 190mm Depth: 80mm Weight: 1.6kg Voltage: 13.2V Ingress Rating: IP69K Colour Temperature: 5700K Warranty: 5 Years Designed For 4WD and off-road vehicles Touring and long-distance driving Work and utility vehicles Low-light and rural environments Why Choose This Bundle This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions. Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
BUY NOW
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers + Amplifier + Subwoofer + Reverse Camera ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers + Amplifier + Subwoofer + Reverse Camera
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +... $6,930.00 $7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility. Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier ALPINE RS-SB10 Shallow Subwoofer Enclosure ALPINE HCE-C1100 Rear View Drive Assist Camera Key Benefits Complete premium audio and safety system in one bundle Hi-Res Audio performance with powerful, detailed sound Deep, controlled bass from shallow subwoofer design High-output 5-channel amplifier for full system control Wireless Apple CarPlay and Android Auto connectivity Improved reversing safety with rear view camera Seamless integration for LandCruiser 70 Series Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier and advanced sound tuning R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for accurate sound reproduction Glass-fibre reinforced cones for clarity and response HAMR surround for enhanced bass performance Integrated door pods with USB charging and storage HDA-V90 Amplifier Features 5-channel Class-D amplifier with Hi-Res Audio certification Frequency response: 10Hz – 60kHz 75W x 4 + 300W x 1 @ 4Ω output 100W x 4 + 500W x 1 @ 2Ω output High damping factor for precise speaker control Low distortion for clean and accurate sound RS-SB10 Subwoofer Features Shallow 12-inch high-performance subwoofer enclosure 600W RMS and 1800W peak power handling Ultra-compact design for flexible installation Neodymium magnet for high efficiency and power 20mm X-max for deep, controlled bass output Rear View Camera Features Wide viewing angle for improved rear visibility HDR technology for clear image in low light conditions Automatic activation when reversing Day and night image adjustment System Performance High-resolution audio playback across full system Powerful amplified output with deep bass response Balanced sound staging with precise tuning capability Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete premium audio system Off-road and touring vehicles Users wanting high-performance sound and added safety Why Choose This Bundle This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features. Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
BUY NOW
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers $4,679.91 $5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration. Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P Key Benefits Complete premium audio upgrade for LandCruiser 70 Series Dual Cab High-resolution sound with powerful bass and clarity Wireless Apple CarPlay and Android Auto connectivity Factory-style integration with modern design enhancement Additional functionality with storage, USB charging, and lighting i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control Seamless integration designed for LC70 interior R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear for powerful output Hi-Res Audio certified for accurate and detailed sound Glass-fibre reinforced cones for fast response and clarity HAMR surround for increased bass performance and control Neodymium magnet structure for improved efficiency High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated front and rear speaker pods Built-in USB charging ports (up to 4 devices) Integrated puddle lighting for improved visibility at night Storage compartments for bottles, maps, and accessories Durable injection-moulded PC/ABS construction Performance Specifications Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Woofer Size: 6x9 inch Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers upgrading factory audio systems Off-road and touring vehicles Users seeking premium sound quality and modern connectivity Why Choose This Bundle This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures. Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
BUY NOW
ALPINE LC70 Ultimate Audio System Bundle — Head Unit + Speakers + Amplifier ALPINE LC70 Ultimate Audio System Bundle — Head Unit + Speakers + Amplifier
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +... $5,309.87 $5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power. Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE R2-A60F Class-D Digital Amplifier Key Benefits Complete premium audio system upgrade in one bundle High-resolution sound with powerful bass and clarity Amplified performance for maximum output and control Wireless Apple CarPlay and Android Auto connectivity Factory-style integration designed for LC70 Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for detailed and accurate sound Glass-fibre reinforced cones for fast response HAMR surround for increased bass performance High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated speaker pods front and rear Built-in USB charging ports for up to 4 devices Integrated puddle lighting for improved visibility Storage compartments for everyday convenience Durable PC/ABS construction for long-lasting use R2-A60F Amplifier Features Compact Class-D digital amplifier with reduced footprint Hi-Res Audio certified up to 45kHz Top panel sound controls for easy tuning One-sided terminal layout for simplified installation 100W RMS x 4 @ 4Ω output 150W RMS x 2 @ 2Ω output 300W RMS x 2 @ 4Ω bridged Frequency response: 10Hz – 45,000Hz High damping factor for improved speaker control Performance Specifications Speaker Peak Power: 300W Speaker RMS Power: 100W Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete audio system upgrade Off-road and touring vehicles Users wanting powerful, high-quality sound performance Why Choose This Bundle This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems. Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
BUY NOW
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle — Head Unit + Reverse Camera ALPINE LC70 Premium Head Unit & Reverse Camera Bundle — Head Unit + Reverse Camera
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —... $2,789.91 $3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing. Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE HCE-C1100 Rear View Drive Assist Camera Key Benefits Complete infotainment and safety upgrade in one bundle Wireless Apple CarPlay and Android Auto connectivity High-definition 9-inch WXGA display Enhanced reversing visibility with wide-angle camera Seamless integration designed for LandCruiser 70 Series i905-LC70 Head Unit Features 9-inch WXGA high-resolution display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for superior sound performance Advanced sound tuning for custom audio control Seamless integration with LandCruiser 70 Series interior Rear View Camera Features Wide viewing angle: 131° horizontal, 103° vertical HDR technology for clear vision in low-light conditions Automatic day and night image adjustment RCA or direct Alpine connection compatibility Automatic activation when reversing Compact design with included mounting hardware Camera Specifications Resolution: 640 x 480 Waterproof rating: IP67 Power supply: DC5.0V – DC7.0V Viewing angle: 131° horizontal, 103° vertical Operating temperature: -30°C to +70°C Designed For Toyota LandCruiser 70 Series Off-road and touring vehicles Daily driving and work vehicles Drivers seeking upgraded audio and safety Why Choose This Bundle This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence. Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
BUY NOW
SHOW MORE

© 2026 tjmnorthernbeaches.com.au. All rights reserved. | ABN: 49 121 938 190

🔒Site Secured with SSL 🛡️Encrypted Checkout ✅Powered by Shopify 💳Trusted Payments