Speakers

ALPINE 6-1/2" 2-WAY WHITE COAXIAL MARINE SPEAKERS (WHITE)-SPS-M601W The new SPS-M601W White 6.5” Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8” Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5” poly woofers handle the mid-range frequencies. On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene® rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they’re tested against fog, salt and blazing sunlight so you can be sure they’ll sound great for many seasons to come. For added convenience, included is a marine grade connection loom for a more robust installation. Features Crossover Network Crossover Type: Built-in Tweeter Protection Woofer Frame: High Temp ABS Frame Cone Material: Poly-Mica Woofer Cone Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill Tweeter Magnet Material: Neodymium Magnet Application Type / Design Detail: Internal / Fixed Tweeter Tweeter Type: Titanium/PEI Balanced Dome Tweeter Specifications General Sensitivity: 89dB / W(1m) Impedance: 4 Ω Frequency Response: 50Hz – 20khz Dimensions Woofer Mounting Depth: 2-27/32” Woofer Mounting Depth: 72.1mm Woofer Mounting Diameter: 5” Woofer Mounting Diameter: 127mm Woofer Diameter: 6-1/2” Woofer Diameter: 165.1mm Power Handling Power Handling Capacity (Peak): 100 Watts Power Handling Capacity (RMS): 30 Watts CEA-2031 Power Rating: 30 Watts

Your entry to high-res audio Using technology developed for their flagship F#1 Status Series, Alpine built their Next-Generation R-Series Pro Series speakers to be accessible and fun for enthusiasts who are into high-resolution audio playback. Play your high-res music files with confidence, knowing that the ultra-wide frequency response of these speakers will provide the detailed, authentic sound you're looking for.  Minimal distortion Alpine optimizes their R2-S65 6-1/2" 2-way speakers for near-perfect sound from premium sources. The combination of a highly rigid aluminum frame and a lightweight glass-fiber reinforced woofer cone keeps the sound clean. The high-amplitude multi-roll surround maximizes impact while maintaining linearity, so you'll get punch to go with the clarity. And speaking of a little more punch, Alpine ups the mid-bass output with a ferrite magnet and larger motor structure. Loud and fun All the exquisite detail you need is handled by a 1" magnesium hard dome tweeter, which contributes to the "loud and fun" sound associated with Alpine's R-Series. These speakers make a great addition to any high-powered system, thanks to power-handling up to 100 watts RMS. Hook ‘em up and play ‘em loud! Product highlights: 6-1/2" 2-way car speakers (pair) glass-fiber woofer cone with High-Amplitude Multi-Roll surround 1" magnesium hard dome tweeter handles up to 100 watts RMS (300 watts peak power) frequency response: 65-40,000 Hz grilles included warranty: 1 year MFR # R2-S65 Item # 500R2S65 What's in the box: Two 2-way Speakers Two multi-purpose adapter rings (includes GM/Chrysler) Two grilles Eight 1-1/8" Screws Eight M4x12mm Machine screws 8 Speed clips Warranty information Important Notice On-line product registration information Template and specs on box Features & specs General Speaker Size 6 1/2 Driver Design 2-way Woofer Design Cone Woofer Material Glass-Fiber Woofer Surround Rubber Midrange Design --- Midrange Material --- Tweeter Design Dome Tweeter Material Magnesium Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included Black, Steel mesh, Plastic frame Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) 88 Sensitivity at 2.83 volts N/A Frequency Response 65 - 40k Hz Maximum RMS Wattage 100 Peak Power Handling (Watts) 300 Top-mount Depth (Inches) 2 1/2 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 3/8 Mounting Height (Inches) 0.667 Frame Width 6.497 Frame Length 6.497

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Alpine BRV-S65 BassRev 6.5" 2-Way Coaxial Speakers with HEDGE Surround Technology Upgrade your vehicle’s factory audio system with the Alpine BRV-S65 BassRev 6.5" 2-Way Coaxial Speaker System. Engineered from Alpine’s decades of acoustic innovation, the BassRev Series introduces advanced HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, greater speaker excursion, and improved sound pressure levels while maintaining Alpine’s signature clarity and precision. Combining a lightweight polypropylene woofer with an integrated 1-inch polyester soft dome tweeter, the BRV-S65 delivers rich bass, detailed vocals, and smooth high frequencies in a simple drop-in coaxial design. Perfect for factory speaker replacement, the BRV-S65 offers a significant improvement in audio performance for a wide range of vehicles. Key Features 6.5" (165mm) 2-Way Coaxial Speaker System designed for premium sound quality and easy installation. Exclusive HEDGE Surround Technology increases cone excursion for deeper bass and greater impact. Lightweight Polypropylene Woofer Cone delivers accurate sound with reduced distortion. Integrated 1" Polyester Soft Dome Tweeter provides detailed and smooth high-frequency response. Large 95mm Strontium Ferrite Magnet Structure enhances speaker efficiency and control. 40mm Voice Coil Design supports increased power handling and dynamic performance. Neodymium Tweeter Magnet ensures clean and precise treble reproduction. High-Quality Audio-Grade Crossover Network optimises frequency distribution. Factory Speaker Replacement Design suitable for a wide range of vehicles. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is engineered to maximise low-frequency performance by allowing greater cone movement while maintaining exceptional control. The result is powerful bass response within the critical 40Hz–80Hz frequency range without sacrificing accuracy. With up to 28mm of maximum linear excursion, the BRV-S65 produces deeper, more impactful bass than conventional factory replacement speakers, delivering a fuller and more immersive listening experience. Polypropylene Woofer for Accurate Sound Reproduction The BRV-S65 features a specially engineered polypropylene woofer cone that combines lightweight construction with outstanding rigidity. This design minimises unwanted resonance and distortion while maintaining excellent structural integrity even at high volume levels. The result is clean bass response, detailed midrange frequencies, and balanced overall sound performance across a wide range of music genres. Large Magnet Structure for Powerful Performance Built with a large 95mm Strontium Ferrite magnet and oversized 40mm voice coil, the BRV-S65 delivers enhanced driver control, greater efficiency, and increased sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output and stronger bass performance. Integrated Soft Dome Tweeter with Neodymium Magnet The integrated 1-inch polyester soft dome tweeter delivers smooth, detailed, and natural high-frequency reproduction. Featuring a lightweight polyester diaphragm and powerful Neodymium magnet assembly, the tweeter accurately reproduces subtle musical details, vocals, and harmonics with excellent clarity. The coaxial design ensures seamless integration between low and high frequencies, creating a balanced and enjoyable listening experience throughout the vehicle cabin. OPTIM™Sync Compatible Audio Enhancement The BRV-S65 is compatible with Alpine’s revolutionary OPTIM™Sync technology when used alongside the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock greater low-frequency extension, smoother tonal balance, and improved overall performance. Ideal Factory Speaker Upgrade Designed for direct replacement of factory-installed speakers, the BRV-S65 provides a simple upgrade path for drivers looking to improve their vehicle's audio quality. Its coaxial design simplifies installation while delivering significant improvements in clarity, bass response, and overall listening enjoyment. Technical Specifications Model Alpine BRV-S65 Speaker Type 2-Way Coaxial Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Type 1" Polyester Soft Dome Tweeter Tweeter Magnet Material Neodymium Tweeter Voice Coil 20mm Crossover Network High-Quality Audio-Grade Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS Per Channel Speaker Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm What's Included 2 x Alpine BRV-S65 6.5" BassRev Coaxial Speakers Integrated 1" Soft Dome Tweeters Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65? Advanced HEDGE surround technology for enhanced bass response Powerful 95mm magnet structure and 40mm voice coil design Lightweight polypropylene woofer for accurate sound reproduction Integrated soft dome tweeter with Neodymium magnet Easy factory speaker replacement installation OPTIM™Sync compatibility for advanced DSP tuning Excellent balance of bass, mids, and highs Legendary Alpine engineering and reliability Experience deeper bass, greater clarity, and a more immersive driving experience with the Alpine BRV-S65 BassRev 6.5" Coaxial Speakers — a premium audio upgrade designed to bring your music to life.

Alpine BRV-S65C BassRev 6.5" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's sound system with the Alpine BRV-S65C BassRev 6.5" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, improved cone control, and exceptional sound clarity while maintaining Alpine’s renowned audio precision. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S65C provides rich low frequencies, detailed vocals, and crystal-clear highs. Designed as a premium factory speaker replacement, these speakers offer a significant upgrade in performance for a wide variety of vehicles. Key Features 6.5" (165mm) 2-Way Component Speaker System engineered for superior audio performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper and more impactful bass. Lightweight Polypropylene Woofer Cone delivers excellent rigidity with reduced distortion. 1" Polyester Soft Dome Tweeters reproduce smooth and detailed high frequencies. Large Strontium Ferrite Magnet Structure improves efficiency and speaker control. 40mm Woofer Voice Coil supports increased power handling and dynamic output. High-Quality Audio-Grade Crossover Network ensures seamless integration between woofer and tweeter frequencies. Neodymium Tweeter Magnets provide precise and articulate treble reproduction. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP Amplifier. Revolutionary HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise low-frequency performance. By allowing greater cone travel while maintaining exceptional control, the BRV-S65C achieves impressive bass output within the critical 40Hz–80Hz range. Capable of achieving up to 28mm of maximum linear excursion, these speakers produce powerful bass response that adds depth and impact to your music without compromising overall sound quality. Lightweight Polypropylene Woofer Cone The BRV-S65C features a durable polypropylene woofer cone designed to remain lightweight yet highly rigid. This advanced cone material effectively resists unwanted resonance and vibration, allowing for accurate and balanced sound reproduction even during demanding listening conditions. The result is cleaner bass response, improved midrange detail, and lower distortion at higher volume levels. Large Magnet Motor Structure Equipped with oversized 95mm Strontium Ferrite magnets and large 40mm voice coils, the BRV-S65C is built to deliver enhanced speaker control, increased efficiency, and greater sound pressure levels. Combined with HEDGE surround technology, this powerful motor structure produces louder, punchier sound with improved low-frequency extension. Polyester Soft Dome Tweeters with Neodymium Magnets The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with outstanding precision. Lightweight polyester diaphragms combined with powerful Neodymium magnets provide exceptional clarity, smoothness, and accuracy throughout the high-frequency range. Enjoy improved sound staging, wider imaging, and immersive listening performance with every drive. OEM-Friendly Tweeter Installation The BRV-S65C tweeters are designed for versatile installation with removable housings and trim rings that reduce overall size for OEM integration. This compact design allows installation into many factory tweeter locations including: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexibility enables a clean, factory-style appearance with minimal modification required. OPTIM™Sync Technology Compatibility The BRV-S65C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies dynamic bass enhancement and speaker-specific equalisation profiles to unlock deeper bass performance, smoother tonal balance, and improved overall sound quality. Technical Specifications Model Alpine BRV-S65C Speaker Type 2-Way Component Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S65C 6.5" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65C? Advanced HEDGE surround technology for powerful bass performance Premium polypropylene woofer cone for accurate sound reproduction Large 40mm voice coil and 95mm magnet structure for increased output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design for factory locations Compatible with Alpine OPTIM™Sync DSP processing Excellent factory speaker replacement upgrade Legendary Alpine engineering and sound quality The Alpine BRV-S65C BassRev 6.5" Component Speaker System delivers deep bass, exceptional clarity, and premium sound quality, making it the ideal upgrade for drivers seeking an immersive and powerful in-car audio experience.

Alpine BRV-S80C BassRev 8" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's audio performance with the Alpine BRV-S80C BassRev 8" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering powerful bass response while maintaining the exceptional clarity, detail, and precision Alpine is renowned for. Designed as a premium factory speaker replacement, the BRV-S80C combines an 8-inch lightweight polypropylene woofer with a precision 1-inch polyester soft dome tweeter to produce deep bass, detailed midrange frequencies, and crystal-clear highs. Whether powered by a factory head unit or aftermarket amplifier, these speakers deliver immersive sound with outstanding balance and dynamic performance. Key Features 8" (200mm) 2-Way Component Speaker System engineered for superior sound quality and bass performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper, more impactful bass. Lightweight Polypropylene Woofer Cone provides excellent rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth, detailed high-frequency reproduction. Large Strontium Ferrite Magnets increase driver force and efficiency. High-Quality Audio-Grade Tweeter Crossovers ensure seamless frequency integration. Neodymium Tweeter Magnets offer precise and articulate high-frequency response. Flush Mount & OEM-Friendly Tweeter Design for easy installation in factory locations. Compatible with Alpine OPTIM™8 DSP for advanced OPTIM™Sync bass optimisation. Ideal Factory Speaker Upgrade for a wide range of vehicles. All-New HEDGE Surround Technology At the heart of the BRV-S80C is Alpine’s revolutionary HEDGE (High Excursion Design Gathered Edge) surround technology. Specifically engineered to maximise low-frequency output, HEDGE dramatically increases cone travel while maintaining control and accuracy. The result is powerful bass response within the critical 35Hz–80Hz frequency range, delivering impressive low-end impact and a maximum linear excursion peak of 28mm. You'll experience bass that is not only heard but felt, without sacrificing clarity or balance. Lightweight Polypropylene Woofer Cone The BRV-S80C utilises a specially engineered polypropylene woofer cone that combines lightweight construction with exceptional rigidity. This advanced material minimises unwanted resonance and distortion while maintaining structural integrity under demanding listening conditions. Even at high volume levels and large cone excursions, the woofer reproduces music with smooth, accurate, and balanced performance across the entire frequency spectrum. Large Magnet Structure for Greater Output Featuring oversized 100mm Strontium Ferrite magnets and large 35mm voice coils, the BRV-S80C is built to deliver increased cone control and higher sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output, improved efficiency, and deeper bass performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters provide exceptional high-frequency detail and smooth tonal balance. Designed with lightweight polyester diaphragms and powerful Neodymium magnets, these tweeters accurately reproduce subtle musical details, transients, and harmonics for an expansive and immersive listening experience. The result is precise imaging, excellent sound staging, and crystal-clear highs without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S80C tweeters feature a collapsible housing and removable trim ring, allowing installation into many factory tweeter locations including: A-Pillar Mounts Mirror Sail Panels Factory Tweeter Pods Door Trim Locations This flexible design enables a clean, factory-style installation while preserving the vehicle's original interior appearance. OPTIM™Sync Compatible Performance The BRV-S80C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. This advanced processing platform intelligently applies dynamic bass enhancement and custom equalisation profiles specifically tuned for BassRev speakers, unlocking deeper bass, improved tonal balance, and enhanced overall performance. Technical Specifications Model Alpine BRV-S80C Speaker Type 2-Way Component Speaker System Woofer Size 8" (200mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 35mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 100mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 35Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 20.96 cm Cut-Out Diameter 19.7 cm Mounting Depth 8.55 cm Mounting Height 1.09 cm Magnet Diameter 10.0 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S80C 8" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S80C? Advanced HEDGE surround technology for deeper bass response Premium polypropylene woofer for clean, distortion-free sound Powerful Strontium Ferrite magnet motor structure Detailed and smooth polyester soft dome tweeters OEM-friendly installation design OPTIM™Sync compatibility for enhanced bass performance Perfect upgrade from factory vehicle speakers Legendary Alpine engineering and sound quality The Alpine BRV-S80C BassRev 8" Component Speaker System delivers the ideal balance of powerful bass, detailed highs, and exceptional clarity, making it the perfect audio upgrade for drivers seeking premium sound performance in any vehicle.

ALPINE DM-SERIES 50RMS COAXIAL SPEAKER ( NO GRILLES ) -DM-65 Introducing the Alpine M-Series, a car audio system that speaks volumes through its outstanding performance at an incredible price. Engineered using Alpine’s innovative “trickle-down” technology, the M-Series is crafted for budget-conscious music lovers who refuse to compromise on sound quality. Created for connoisseurs of authentic audio excellence, the M-Series focuses on delivering exceptional sound within a bold, stealth aesthetic design. With the incorporation of Alpine’s renowned H.A.M.R. Surround and a polypropylene cone, these speakers bring your favourite tracks to life with unmatched clarity and precision. Experience music like never before as the M-Series unveils subtle nuances you might have missed. Say goodbye to distorted bass and muddled lyrics – M-Series will ensure every note is crisp, and every beat is just right. Installation is a breeze, thanks to hassle-free, straightforward instructions that won’t leave you feeling overwhelmed. In no time, your car can be transformed into a mobile concert hall, ready to provide a genuine audio experience that moves you to the core. Experience the extraordinary with the M-Series. This remarkable car audio system doesn’t just meet your expectations; it exceeds them, offering unparalleled, high-quality sound that brings your music to life. If you desire a genuine and reliable car audio solution, look no further than the Alpine M-Series. Elevate your driving experience with Alpine M-Series – where affordability meets exceptional sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Large Magnet Structure The large strontium magnets housed on the back of M-Series speakers mean business. With large voice coils and Alpine’s patented HAMR Surround, they work together to enhance cone excursion and driver force, delivering louder and punchier bass. PP Woofer Cone The polypropylene (PP) woofer cone is light weight and provides excellent audio response with excellent power efficiency. This makes the DM-65 the perfect solution for those who desire great sounding audio without the expense and complication of a high-power system. Integrated Soft Dome Tweeter The integrated 1″ Soft Dome Tweeters allow your music to come alive! Playing upper harmonics climbing up to 20kHz, these beautifully soft yet remarkably detailed tweeters bring the studio to the dashboard with an honourable level of nuance and authenticity. Complete System Family Embrace the essence of a complete system family designed to integrate into virtually any vehicle or configuration. With perfect power matching and synergy, the PXE-M60-4 utilises intelligent matrix input summing and provides RCA pre-outs for connection to the PWE-M770 subwoofer or an alternate subwoofer system. The M-Series system combines compact power amplification with advanced sound processing, high-quality speakers and an 7-inch subwoofer that delivers unrivalled power and performance at a modest price.\ Features Woofer 6.5″ (165mm) Component Speaker HAMR (High Amplitude Multi-Roll) Surround Magnet Material: Strontium Ferrite Tweeter 1″ Soft Dome Magnet Material: Neodymium Specifications Power Handling Peak Power: 200 Watts RMS Power: 50 Watts General Frequency Range: 65 Hz – 20 kHz Impedance: 4 Ohms Sensitivity: 88 dB

ALPINE DM-SERIES 50RMS COMPONENT SPEAKER ( NO GRILLES ) -DM-65C Introducing the Alpine M-Series, a car audio system that speaks volumes through its outstanding performance at an incredible price. Engineered using Alpine’s innovative “trickle-down” technology, the M-Series is crafted for budget-conscious music lovers who refuse to compromise on sound quality. Created for connoisseurs of authentic audio excellence, the M-Series focuses on delivering exceptional sound within a bold, stealth aesthetic design. With the incorporation of Alpine’s renowned H.A.M.R. Surround and a polypropylene cone, these speakers bring your favourite tracks to life with unmatched clarity and precision. Experience music like never before as the M-Series unveils subtle nuances you might have missed. Say goodbye to distorted bass and muddled lyrics – M-Series will ensure every note is crisp, and every beat is just right. Installation is a breeze, thanks to hassle-free, straightforward instructions that won’t leave you feeling overwhelmed. In no time, your car can be transformed into a mobile concert hall, ready to provide a genuine audio experience that moves you to the core. Experience the extraordinary with the M-Series. This remarkable car audio system doesn’t just meet your expectations; it exceeds them, offering unparalleled, high-quality sound that brings your music to life. If you desire a genuine and reliable car audio solution, look no further than the Alpine M-Series. Elevate your driving experience with Alpine M-Series – where affordability meets exceptional sound. HAMR Surround Not only does Alpine’s patented High Amplitude Multi-Roll (HAMR) surround maintain full control over the cone at any stage of excursion for high SPL. It’s ability to far exceed the maximum linear excursion of regular domed surround allows for beautifully pure sound and punchy bass. Large Magnet Structure The large strontium magnets housed on the back of M-Series speakers mean business. With large voice coils and Alpine’s patented HAMR Surround, they work together to enhance cone excursion and driver force, delivering louder and punchier bass. PP Woofer / Integrated Wave Guide  The polypropylene (PP) woofer cone is light weight and provides excellent audio response with excellent power efficiency. Moreover, the component speakers are equipped with an integrated wave guide to ensure uniform sound dispersion and optimised sound imaging. The DM-65C creates a perfect solution for those who desire great sounding audio without the expense and complication of a high-power system. Versatile Tweeter Installation The 1” Soft Dome Tweeters cater to a wide-array of installation methods. They can be flush mounted and rotated within the housing to find the exact axis sweet spot. For stealth applications the frames can be removed to reduce down to a fraction of their original size for easy replacement of factory fitted OEM tweeters. Complete System Family Embrace the essence of a complete system family designed to integrate into virtually any vehicle or configuration. With perfect power matching and synergy, the PXE-M60-4 utilises intelligent matrix input summing and provides RCA pre-outs for connection to the PWE-M770 subwoofer or an alternate subwoofer system. The M-Series system combines compact power amplification with advanced sound processing, high-quality speakers and an 7-inch subwoofer that delivers unrivalled power and performance at a modest price. Features Woofer 6.5″ (165mm) Coaxial Speaker HAMR (High Amplitude Multi-Roll) Surround Magnet Material: Strontium Ferrite Tweeter 1″ Soft Dome Magnet Material: Neodymium Application Type: External/Tweeter Mounting Kit Flush mount and Collapsable for OEM fit. Specifications Power Handling Peak Power: 200 Watts RMS Power: 50 Watts General Frequency Range: 65 Hz – 20 kHz Impedance: 4 Ohms Sensitivity: 88 dB

Alpine Hilux 2012-2015 R2 Series Speaker Solution ( Front & Rear ) -Hl15-R265P  

ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration. Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P Key Benefits Complete premium audio upgrade for LandCruiser 70 Series Dual Cab High-resolution sound with powerful bass and clarity Wireless Apple CarPlay and Android Auto connectivity Factory-style integration with modern design enhancement Additional functionality with storage, USB charging, and lighting i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control Seamless integration designed for LC70 interior R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear for powerful output Hi-Res Audio certified for accurate and detailed sound Glass-fibre reinforced cones for fast response and clarity HAMR surround for increased bass performance and control Neodymium magnet structure for improved efficiency High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated front and rear speaker pods Built-in USB charging ports (up to 4 devices) Integrated puddle lighting for improved visibility at night Storage compartments for bottles, maps, and accessories Durable injection-moulded PC/ABS construction Performance Specifications Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Woofer Size: 6x9 inch Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers upgrading factory audio systems Off-road and touring vehicles Users seeking premium sound quality and modern connectivity Why Choose This Bundle This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures. Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.

ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power. Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE R2-A60F Class-D Digital Amplifier Key Benefits Complete premium audio system upgrade in one bundle High-resolution sound with powerful bass and clarity Amplified performance for maximum output and control Wireless Apple CarPlay and Android Auto connectivity Factory-style integration designed for LC70 Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for detailed and accurate sound Glass-fibre reinforced cones for fast response HAMR surround for increased bass performance High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated speaker pods front and rear Built-in USB charging ports for up to 4 devices Integrated puddle lighting for improved visibility Storage compartments for everyday convenience Durable PC/ABS construction for long-lasting use R2-A60F Amplifier Features Compact Class-D digital amplifier with reduced footprint Hi-Res Audio certified up to 45kHz Top panel sound controls for easy tuning One-sided terminal layout for simplified installation 100W RMS x 4 @ 4Ω output 150W RMS x 2 @ 2Ω output 300W RMS x 2 @ 4Ω bridged Frequency response: 10Hz – 45,000Hz High damping factor for improved speaker control Performance Specifications Speaker Peak Power: 300W Speaker RMS Power: 100W Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete audio system upgrade Off-road and touring vehicles Users wanting powerful, high-quality sound performance Why Choose This Bundle This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems. Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.

ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility. Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier ALPINE RS-SB10 Shallow Subwoofer Enclosure ALPINE HCE-C1100 Rear View Drive Assist Camera Key Benefits Complete premium audio and safety system in one bundle Hi-Res Audio performance with powerful, detailed sound Deep, controlled bass from shallow subwoofer design High-output 5-channel amplifier for full system control Wireless Apple CarPlay and Android Auto connectivity Improved reversing safety with rear view camera Seamless integration for LandCruiser 70 Series Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier and advanced sound tuning R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for accurate sound reproduction Glass-fibre reinforced cones for clarity and response HAMR surround for enhanced bass performance Integrated door pods with USB charging and storage HDA-V90 Amplifier Features 5-channel Class-D amplifier with Hi-Res Audio certification Frequency response: 10Hz – 60kHz 75W x 4 + 300W x 1 @ 4Ω output 100W x 4 + 500W x 1 @ 2Ω output High damping factor for precise speaker control Low distortion for clean and accurate sound RS-SB10 Subwoofer Features Shallow 12-inch high-performance subwoofer enclosure 600W RMS and 1800W peak power handling Ultra-compact design for flexible installation Neodymium magnet for high efficiency and power 20mm X-max for deep, controlled bass output Rear View Camera Features Wide viewing angle for improved rear visibility HDR technology for clear image in low light conditions Automatic activation when reversing Day and night image adjustment System Performance High-resolution audio playback across full system Powerful amplified output with deep bass response Balanced sound staging with precise tuning capability Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete premium audio system Off-road and touring vehicles Users wanting high-performance sound and added safety Why Choose This Bundle This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features. Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.

The All-new R-Series Pro Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 2-Way Component PRO Speaker The R2-S652 is the 2-Way PRO model of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer and a 4,3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. Flexible PRO X-Over Network This large-size crossover network includes many high-quality components selected for best sound quality. You can adjust the mid-range speaker level by -3dB / 0dB / +3dB and the tweeter level as well by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 6×9” 2-Way Coaxial Speaker The R2-S69 is the 6×9” 2-Way Coax model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer as well as an integrated tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line. 6×9” 2-Way Component Speaker The R2-S69C is the 6×9” 2-Way model of the new 2022 R-Series speaker line-up. It features a 16 x 24cm door woofer and a 4.3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction. Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.   2-Way Component Speaker The R2-S65C is the 2-Way model of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer, and a 4.3cm tweeter with up to 40kHz frequency response.   Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.   Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

The All-new R-Series Pro Speakers Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget. If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.   3-Way Component PRO Speaker The R2-S653 is the top of the line of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer, 9.6cm mid-range speaker and a 4.3cm tweeter with up to 40kHz frequency response. Glass-Fiber Reinforced Cone The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.   Composite Basket and Large Magnets The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth). Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot. Easy-Fit Tweeter in OEM Locations You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation. Flexible PRO X-Over Network This large-size crossover network includes many high-quality components selected for best sound quality. You can adjust the mid-range speaker level by -3dB / 0dB / +3dB and the tweeter level as well by -3dB / 0dB / +3dB. HAMR Surround Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion. New Speaker Grills The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.

Alpine Hilux 2012-2015 R2 Series Speaker Solution ( Front & Rear ) -Hl15-R265 Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″  

Turn up the bass in your Toyota Hilux — the next Generation R-Series are born to be played loud with Alpine’s all-new R-Series ‘direct fit’ premium speaker upgrade. Equipped with Alpine’s exclusively designed tweeter housing superior sound quality is achieved, all-while your cabin space is enhanced with its striking appearance and premium finishes inclusive of a machine finished metal Alpine logo and contrasting black chrome accent. Alpine engineered and reborn from the ground up, the all-new R-Series speaker housings unites true Hi-Fi sound quality and ultra-bass performance with precise and direct replacement of the factory installed speakers. All parts are pre-assembled with ‘plug-n-play’ connections providing a straight forward, no-fuss installation with no need of any modifications, cutting of wires, nor soldering. Perfect Integration Alpine’s premium design ‘A Pillar’ direct-fit tweeter housing with a machine cut Alpine logo and an elegant black chrome bezel which are all pre-assembled parts ready for direct installation to your Toyota Hilux. Premium Design Tweeter Housing Premium audio never looked so good. The bold, yet ornate design of the tweeter housing directly replaces the OEM which elevates the interior aesthetic and optimises the tweeter axis for superior sound quality. Hi-Res Audio Certified Hard Dome Tweeter The all-new magnesium hard-dome tweeters housed within the centre of the speaker and tweeter delivers an ultra-clear, yet highly detailed and smooth response. They play right up to 40kHz allowing harmonics to reveal the finest of nuances for an authentic sound experience, faithfully to the original recording. Direct Fit Installation All speakers interface directly to the OEM, providing a quick and easy ‘plug-n-play’ connection. This means there is no need to cut, solder or modify any of the vehicle’s original wiring — saving you time by easily utilising the original speaker wires, allowing for a straight and simple installation. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB. Features Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Magnet Swivel Application allowing the sound to be focused for the best in-car sound performance Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 65Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Swivel Tweeters Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 165mm Woofer Diameter (in): 6-1/2″ Woofer Mounting Diameter (mm): 176mm Woofer Mounting Diameter (in): 6-15/16″ Woofer Mounting Depth (mm): 59mm Woofer Mounting Depth (in): 2-3/8″

Enhance Your Ford Ranger PXII/PXIII with R2-Series Premium Front and Rear Speaker System Upgrade Your Ford Ranger's Audio System with Alpine's R-Series Premium Speaker System - Direct Fit for PXII/PXIII Models" Revamp your driving experience with Alpine's R-Series premium speaker system, the perfect upgrade for your Ford Ranger PXII/PXIII. With a sleek design and superior sound quality, the R-Series speakers are engineered to elevate your music listening experience. Alpine's exclusive tweeter housing design is crafted for maximum sound performance and a striking appearance. The machine-finished metal Alpine logo and contrasting black chrome accent add a touch of elegance to your cabin space. The R-Series speaker system is designed for a precise and direct replacement of the factory-installed speakers, with a "plug-n-play" connection that requires no modifications, cutting of wires, or soldering. You can upgrade your audio system quickly and easily without any hassle. The speakers feature a Hi-Res Audio certified hard dome tweeter, delivering ultra-clear and highly detailed sound with a smooth response up to 40kHz. The larger magnet structure ensures incredible bass performance without compromising the driver depth. The midrange and woofer drivers have an all-new glass-fibre reinforced cone for exceptional rigidity and lightweight construction, resulting in accurate music reproduction. The exclusive HAMR surround provides powerful bass and pure sound at any excursion stage. Alpine's high-pass X-Over network is easy to install, allowing you to adjust the tweeter level by -3dB / 0dB / +3dB. The R-Series speaker system is the perfect integration of premium design and superior sound quality, providing a seamless upgrade to your Ford Ranger's audio system.

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossovers and a threaded removable housing to make sure you have what you need to make them sound their best. Grilles are not included; the factory grilles should be suitable for most applications. Product highlights: 2-way component speaker system 8" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 85 watts RMS (260 watts peak power) frequency range: 50-40,000 Hz warranty: 1 year MFR # S2-S80C Item # 500S2S80C What's in the box: 2 Woofers 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws 8 Speed clips Warranty information On-line product registration information Important Notice sheet Declaration of conformity Templates and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 3/4" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications.  Product highlights: 4" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 45 watts RMS (140 watts peak power) frequency response: 97-40,000 Hz sensitivity: 86 dB grilles not included warranty: 1 year MFR # S2-S40 Item # 500S2S40 What's in the box: Two 2-way speakers Two 4x6 Adapter brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive backed gaskets Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossovers and a threaded removable housing to make sure you have what you need to make them sound their best. Grilles are not included; the factory grilles should be suitable for most applications. Product highlights: 2-way component speaker system 4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing in-line crossovers for easier installation handles up to 45 watts RMS (140 watts peak power) sensitivity: 86 dB frequency range: 97-40,000 Hz warranty: 1 year MFR # S2-S40C Item # 500S2S40C What's in the box: 2 Woofers Two 4x6 Adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Flat mounting flanges (used in some factory applications) 2 Foam self-adhesive pads 2 Foam self-adhesive rings Ten 3/4" Screws Ten 5/16" Screws Ten 1/4" Screws 10 Speed clips 10 Spacers 2 Adhesive backed gaskets Warranty information On-line product registration information Important Notice sheet Declaration of conformity Templates and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 3/4" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations. Product highlights: 5-1/4" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 3/4" silk dome tweeter handles up to 55 watts RMS (170 watts peak power) frequency response: 80-40,000 Hz grilles not included warranty: 1 year MFR # S2-S50 Item # 500S2S50 What's in the box: Two 2-way speakers Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 3/4" Screws 8 Flat washers 8 Speed clips Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications. READ LESS Product highlights: 6"x8" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 1" silk dome tweeter handles up to 75 watts RMS (230 watts peak power) frequency response: 73-40,000 Hz grilles not included warranty: 1 year MFR # S2-S68 Item # 500S2S68 What's in the box: Two 2-way speakers 2 Bottom mount brackets Two 6x8 Special application brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/8" Screws Eight 3/8" Screws 8 Speed clips 8 Flat washers 8 Spacers 2 Adhesive backed gaskets Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations. Product highlights: 6"x9" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 1" silk dome tweeter handles up to 85 watts RMS (260 watts peak power) frequency response: 55-40,000 Hz sensitivity: 90 dB grilles not included warranty: 1 year MFR # S2-S69 Item # 500S2S69 What's in the box: Two 2-way speakers 2 Bottom mount brackets Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/8" Screws Eight M4x60mm Machine screws (each screw has a lock washer attached) Eight M4 Nuts 8 Speed clips 16 Flat washers 8 Spacers Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A unique 3" separate midrange driver with an integrated 3/4" silk dome tweeter serves up impressive mid- and high-frequency detail that provides a rich sonic experience.  Grilles are not included; the factory grilles should be suitable for most applications. Optional woofer grilles are available for custom installations. Product highlights: 2-way component speaker system 6"x9" polypropylene/glass-fiber/mica woofer cone with High-Amplitude Multi-Roll surround 3" midrange with integrated 3/4" silk dome tweeter in-line crossovers for easier installation handles up to 85 watts RMS (260 watts peak power) frequency range: 55-40,000 Hz top-mount depth: 3" warranty: 1 year MFR # S2-S69C Item # 500S2S69C What's in the box: 2 Woofers 2 Bottom mount brackets 2 Midrange-Tweeters Two 6' Midrange-Tweeter wires with in-line crossovers (each has quick slides on both ends) Two 2"x3.5" Adhesive-backed foam pads Two 9-7/8"x1/4" Adhesive-backed foam strips Eight 1-1/8" Screws Eight 1/2" Screws Eight M4x60mm Machine screws with split lock washers attached Eight M4 Nuts 16 Flat washers 8 Speed clips 8 Spacers Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers. Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations. Product highlights: 6-1/2" 2-way speakers polypropylene/glass fiber/mica woofer cone with specialized rubber surround 1" silk dome tweeter handles up to 80 watts RMS (240 watts peak power) frequency response: 70-40,000 Hz grilles not included warranty: 1 year MFR # S2-S65 Item # 500S2S65 What's in the box: Two 2-way speakers 2 Adapter rings Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other) Eight 1-1/8" Screws Eight M4x6.5mm Machine screws with split lock washers attached Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

It's time for high-res We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wonderous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound. Innovative materials Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossover systems and a threaded removable housing to make sure you have what you need to make them sound their best. Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations. Product highlights: 2-way component speaker system 6-1/2" glass-fiber woofer cone with High-Amplitude Multi-Roll surround 1" silk dome tweeter with threaded removable housing handles up to 80 watts RMS (240 watts peak power) frequency range: 70-40,000 Hz warranty: 1 year MFR # S2-S65C Item # 500S2S65C What's in the box: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters (each has a 29" length of wire attached) 2 Flush mount housings (with tweeters installed) 2 Tweeter grilles (fixed) Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight M4x6.5mm Machine screws with split lock washers attached Eight M4 Nuts 6 Flat washers 8 Speed clips Warranty information On-line product registration information Important Notice sheet Declaration of conformity Template and specs on box

Features Hi-Res Audio certified 2-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm Cutout diameter: woofer 142mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 2-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm Cutout diameter: woofer 142mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 3-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Mid-range diameter: 96mm Tweeter diameter: 70mm (25mm voice coil) Aluminum die-cast baskets Ring-radiator tweeters Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 3-Way speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Mid-range diameter: 96mm Tweeter diameter (slim-fit): 40mm (58mm with housing) Aluminum die-cast baskets Backed carbon fiber cones Double-gathered edge High-end X-Over networks Included speaker grills Integrated Wave Guide on all speakers Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Features Hi-Res Audio certified 2-Way coaxial speaker system AlpineF#1Status speaker trickle-down technology Maximum Peak Power: 300 Watts Maximum RMS Power: 100 Watts Woofer diameter: 170mm (177mm with attached grill) Aluminum die-cast baskets Backed carbon fiber cones Double-gathered edge Included speaker grills Integrated Wave Guide on tweeters Specifications Impedance 4Ω Sensitivity 88dB SPL (2.83 V @ 1 m) Frequency Response: 55Hz – 40kHz Mounting depth: woofer 67mm / mid-range 39mm Cutout diameter: woofer 142mm / mid-range 79mm Recommended amplification: up to 100W RMS per channel Ferrite magnet (woofer) Neodymium magnet (mid-range speaker and tweeter)

Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition. In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5

APX 4 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The 4³ cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 100 mm Impedance 4 Ohm Power Handling - Peak 120 W Power Handling - Continuous 40 W Sensitivity 91 dB Frequency Response 80 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 75 x 40 x 10 Xmax 1.3 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 125 Hz Mms 5.3 g (0.19 oz) Cms 0.3 Bl 3.2 Qms 8 Qes 1,2 Qts 1 Vas 1.5 l (0.05 ft) LE 0.04 mH General Weight 0.49 kg Dimensions Dimension A 102 mm (4.02 in) Dimension A3 130 mm Dimension B 93 mm (3.66 in) Dimension C 43 mm (1.69 in) Dimension D 41 mm (1.61 in)

APX 5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The 5" cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 130 mm (5 in) Impedance 4 Ohm Power Handling - Peak 150 W Power Handling - Continuous 50 W Sensitivity 93 dB Frequency Response 70 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 13 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 90 Hz Mms 8.2 g (0.29 oz) Cms 0.33 Bl 4.6 Qms 10.6 Qes 0,75 Qts 0.7 Vas 3.8 l (0.13 ft) LE 0.07 mH General Weight 0.74 kg Dimensions Dimension A 130 mm (5.12 in) Dimension A3 150 mm Dimension B 119 mm (4.69 in) Dimension C 51 mm (2.01 in) Dimension D 48 mm (1.89 in)

Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.   Technical Specs LF Woofer Size 130 mm (5 in) Impedance 4 Ohm Power Handling - Peak 225 W Power Handling - Continuous 75 W Frequency Response 70 ÷ 20k Voice Coil Diameter 32 mm (1.26 in) Magnet Size 85 x 40 x 13 Crossover Type HP @ 3,5 kHz - 6 dB Oct Crossover Level Adjustment +2; 0 Technical Specs HF Tweeter Size 26 mm (1 in) Voice Coil Diameter 20 mm (1.26 in) Electric-acoustic Specs LF Re 3.1 Ohm Fs 90 Hz Mms 9 g Cms 0.34 BL 4.6 Qms 8 Qts 0.68 Vas 4 l Le 0.25 mH Spl 93 dB Xmax 2 mm (0.08 in) Kit Tech Data Cone Diameter 107 mm General Weight Woofer 0.65 kg Weight Tweeter 0.04 kg

APX 570 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter. The 5x7" cones surround features an exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 570 mm Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Elliptical Size 5 x 7 Sensitivity 93 dB Frequency Response 60 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 15 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 70 Hz Mms 12 g (0.42 oz) Cms 0.4 Bl 4.2 Qms 8.4 Qes 0,9 Qts 0.8 Vas 12.5 l (0.44 ft) LE 0.12 mH General Weight 0.885 kg Elliptical B1 182 mm Elliptical B2 126 mm Elliptical Dimension A1 221 mm Elliptical Dimension A2 140 mm Dimensions Dimension A1 221 mm Dimension A2 140 mm Dimension C 67 mm (2.64 in) Dimension D 63 mm (2.48 in) Dimension B1 182 mm Dimension B2 126 mm

APK 570 systems is ideal for car models with doors equipped to house elliptical speakers featuring 5×7 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 570.The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier.The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients.The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact. Specs Comp 2 way System Size 5 x 7 in. Woofer 26 mm (1 in.) Tweeter 46,5 x 37,5 x 20,1 mm (1.83 x 1.47 x 0.8 in.) Crossover Power Handling 100 W Continuous Power 300 W Peak Power Impedance 4 Ω Frequency Response 55 – 20k Hz Sensitivity 93,5 dB/Spl

APK 163 Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. Technical Data Comp 3 way System Size 165 mm (6.5″) Woofer100 mm (4″) Midbass26 mm (1″) Tweeter46,5 x 37,5 x 20,1 mm (1.83″ x 1.47″ x 0.8″) APCX TW Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX MD Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX WF Crossover Power Handling 125 W Continuous Power375 W Peak Power Impedance 4 Ω Frequency Response 50 – 20k Hz Sensitivity 93,5 dB/Spl Technical Specifications Specification Details Woofer Size 165 mm (6.5 in.) Midbass Size 100 mm (4 in.) Tweeter Size 26 mm (1 in.) Power Handling (Peak) 375 Watts Power Handling (Continuous) 125 Watts Impedance 4 Ohm Frequency Response 50 Hz – 20 kHz Crossover Type LP @ 600 Hz – 6 dB/OctHP @ 600 Hz / 3.5 kHz – 6/6 dB/OctHP @ 3.5 kHz – 6 dB/Oct Component Adjustment 0 to +2 dB Magnet Size Component Magnet Size (mm) D × H (in.) Woofer 85 × 40 × 15 3.35 × 1.57 × 0.59 Midrange 70 × 32 × 10 2.75 × 1.26 × 0.39 Tweeter 19 × 13 0.75 × 0.12 Weight (per speaker) Component Weight kg (lb) Woofer 0.78 kg (1.72 lb) Midbass 0.40 kg (0.88 lb) Tweeter 0.04 kg (0.09 lb) Voice Coil Diameter Component Ø mm (in.) Woofer 32 mm (1.26 in.) Midbass 25 mm (1 in.) Tweeter 20 mm (0.8 in.)

6.5″ 2-Way Component Speakers The Audison Prima APK 165 2 ohm system features 2 crossovers dedicated to woofer and tweeter and separated, to ease the installation. APCX WF ohm2 crossover shapes AP 6.5 ohm2s frequency response to match it optimally with AP 1 tweeter; it also employs a Low ESR inductor, essential to maximize the power transfer to the 2 ohm coil. APCX TW ohm2 tweeter crossover, instead, is provided with the Hi-Contour function, to enhance the high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer. Features: 2 Ω impedance, to fully exploit the 65 W power per channel at 2 Ω of the AP8.9-bit amplifier. 75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range. 25 mm mobile voice coil to maximize efficiency achieving 95 dB. 10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels. APCX WF 2Ω dedicated woofer crossover with low-loss voice coils to shape the frequency response for an optimal match with the tweeter. APCX TW 2Ω tweeter crossover featuring the Hi-Contour function to enhance high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer. AP 1 tweeter with an acoustic lens designed to balance the frequency response in the 10kHz 13kHz range, to optimize the product’s acoustic emission in critical OEM placements, where the product performance is affected by the presence of the factory grille. Connection cable integrated into the passive crossover and terminated with fast-on connectors conforming to OEM integration. The terminations, which are different at each of the two poles, eliminate any possible connection errors, speeding up the installation process and making it safe over time. AP 6.5 2Ω woofer featuring water-repellent treated paper cone, with profile developed with FEM simulation technology and optimized with Klippel Scan Vibrometer. Woofer with reduced mounting depth, providing ease of installation in OEM placements. Woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion. Woofer with compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system. Woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits. Developed with the KLIPPEL suite. Specifications: Woofer Size: 165 mm Tweeter Size: 26 mm Woofer Voice Coil Diameter: 25 mm Tweeter Voice Coil Diameter: 20 mm Crossover Type: Cut Off @ 4.5 / 5 kHz Magnet Size Woofer: 85 x 32 x 15 Power Handling – Peak: 300 W Power Handling – Continuous: 100 W Impedance: 2 Ohm Frequency Response: 50 ÷ 20k Crossover Cut Off: @ 4.5 / 5 kHz Adjustment Tweeter Level: +2; 0 Woofer Cone Diameter: 127 mm Xmax Woofer: 2.8 mm

APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity. Technical Specs LF Woofer Size 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 210 W Power Handling - Continuous 70 W Frequency Response 60 ÷ 23k Voice Coil Diameter 32 mm (0.59 in) Magnet Size 85 x 40 x 15 Xmax 2 mm (1.26 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Sensitivity 94 dB Voice Coil Diameter 15 mm (0.59 in) Electric-acoustic Specs Re 3.1 Ohm Fs 80 Hz Mms 11.5 g (0.41 oz) Cms 0.33 Bl 4.6 Qms 5.4 Qes 0,84 Qts 0.73 Vas 8.1 l (0.29 ft) LE 0.1 mH General Weight 0.87 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 141 mm (5.55 in) Dimension C 60 mm (2.36 in) Dimension D 57 mm (2.24 in)

6.5″ 2-Way Component Speakers The new Audison Prima APK 165 P two-way loudspeaker system, capable of handling up to 345 W peak, is the ideal combination to fully exploit the power of the AP F8.9 bit or all other Prima amplifiers used in high power configurations. The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The woofer has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency. Features: AP 1P AIF technology (Any Install Faceplate) for total application versatility and a significant reduction in installation time. Three mounting accessories supplied to provide a solution for any type of installation. Magnetic group with double Neodymium tablet for an excellent high frequency extension. 1 CCAW voice coil for superior dynamic response. Dome profile optimized with FEM simulations for a wide off-axis dispersion. AP 6.5P Increased excursion of the mobile group for a superior dynamic response. Optimized electro-acoustic parameters to maximize performance for OEM placements. Magnetic group sized for perfect control even at maximum cone excursion. CCAW (Copper-Clad Aluminium Wire) voice coil (32 x 14 mm) to optimally manage the greater applied power. Compact size basket for easy OEM installations. APCX P 2T, APCX P 2W Separate ultra-compact crossovers for tweeters and woofers to minimize space requirements and simplify cable routing, facilitating the specialist work. Use of components selected and sized for the management of high power avoiding saturation. Asymmetric slope filtering, 12 dB/oct on the tweeter and 6 dB/oct on the woofer for an optimal balance between the two components Specifications: Woofer Size: 165 mm Tweeter Size: 29 mm Woofer Voice Coil Diameter: 32 mm Tweeter Voice Coil Diameter: 25 mm Magnet Size Woofer: 100 x 40 x 18 Power Handling – Peak: 345 W Power Handling – Continuous: 115 W Sensitivity: 92.5 dB Impedance: 4 Ohm Frequency Response: 50 ÷ 24k Crossover Woofer: Low-Pass: 4 kHz @ 6 dB/Oct Crossover Tweeter: Hi-Pass: 4 KHz @ 12dB/Oct. Adjustment Tweeter Level: Tweeter Level; 0 / +3 Woofer Cone Diameter: 132 mm Xmax Woofer: 5.6 mm

The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection. Technical Specs LF Woofer Size 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 100 W Frequency Response 60 ÷ 20k Voice Coil Diameter 32 mm (1.26 in) Magnet Size 85 x 40 x 15 Crossover Level Adjustment +2; 0 Technical Specs HF Tweeter Size 26 mm (1 in) Voice Coil Diameter 20 mm (1.26 in) Electric-acoustic Specs LF Re 3.1 Ohm Fs 80 Hz Mms 12 g Cms 0.31 BL 4.7 Qms 4.7 Qts 0.7 Vas 7.6 l Le 0.23 mH Spl 93.5 dB Xmax 2.5 mm (0.1 in) Kit Tech Data Crossover Hi-Pass HP @ 3,5 kHz - 6 dB Oct Cone Diameter 129 mm General Weight Woofer 0.78 kg Weight Tweeter 0.04 kg

APK 690 - KIT 2Way AP 1+AP 690+XOVERAPK 690 systems are ideal for car models with doors equipped to house elliptical speakers, featuring 6×9 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 690. The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation. The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.Tweeter -• 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.• Acoustic lens designed to compensate for the in-car frequency response in the 10kHz - 13kHz bandwidth caused by critical OEM placements.Woofer -• 25 mm pure copper voice coil, for high power handling and outstanding low frequency control.• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.• Reduced mounting depth, providing ease of installation in OEM placements.• “Triple Wave” surround profile for maximum excursion linearity.• Compact basket, protected by abrasion-resistant and scratchproof coating, the motor affixed with damping epoxy adhesive.• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. Attribute Details Brand Audison Condition NEW Type Component Fitment Size 6x9 Component Set with 1in Tweeter Power Handling (RMS / Continuous) 100W Power Handling (Peak) 300W RMS Wattage Per Speaker 250 Impedance 4 Ohms Frequency Response 40 – 20k Hz Sensitivity 95 dB/SPL Manufacturer SKU 69051090 UPC 8018823129695 ASIN B07V7FRS4P Bundle No Shipping Free 2-Day Shipping Weight 6.39 lbs

The APX 690 features an exclusive 40 mm horn loading dome tweeter that contributes to maximize efficiency up to 96dB SPL and an acoustics lens specifically designed and applied to the tweeter to increase dispersion in the high frequency range.To strengthen the emission of very high frequency ranges otherwise affected by off-axis positioning compared to the listening point, the APX 690 featuring a supertweeter. Technical Specs LF Woofer Size 690 mm Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 100 W Elliptical Size 6 x 9 Sensitivity 96 dB Frequency Response 40 - 23k Voice Coil Diameter 25 mm (0.79 in) Magnet Size 90 x 32 x 15 Xmax 3.5 mm (0.98 in) Technical Specs HF Tweeter Size 40 mm (1.57 in) Voice Coil Diameter 20 mm (0.79 in) Super Tweeter Size 15 Electric-acoustic Specs Re 3.2 Ohm Fs 60 Hz Mms 16.6 g (0.59 oz) Cms 0.5 Bl 5.3 Qms 6.7 Qes 0,7 Qts 0.6 Vas 36 l (1.27 ft) LE 0.2 mH General Weight 1.225 kg Elliptical B1 222 mm Elliptical B2 151 mm Elliptical Dimension A1 238 mm Elliptical Dimension A2 162 mm Dimensions Dimension A1 238 mm Dimension A2 162 mm Dimension C 96 mm (3.78 in) Dimension D 81 mm (3.19 in) Dimension F 25 Dimension B1 222 mm Dimension B2 151 mm Dimension E1 276 mm Dimension E2 202 mm

AUDISON AP BIT - Automatic Speaker Presence AP bit Automatic speaker presence adapter Resistance for OEM radios/amplifiers in combination with AP bit processors Usually used on the rear channels when the signal level can not be set In order to solve the problem associated with OEM amplifiers that feature signal interruption, shutting down when a proper speaker “load” is not present as often found in aftermarket integration, the Prima amplifiers feature ASP (Automatic Speaker Presence). Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the hea

The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front or the upgrade of the rear system. The 100 mm (4 in.) APBMW X4E, with basket and fixing screws dedicated to the specific car model, feature a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties, offers optimized dispersion features for OEM placement, elevating the sound stage to a realistic level. Technical Specs LF Woofer Size 100 mm Impedance 4 Ohm Power Handling - Peak 80 W Power Handling - Continuous 40 W Sensitivity 88 dB Frequency Response 100 ÷ 22k Voice Coil Diameter 25 mm (0.79 in) Magnet Size 50 x 29 x 3 Xmax 0.5 mm (0.98 in) Technical Specs HF Tweeter Size 24 mm (0.94 in) Voice Coil Diameter 20 mm (0.79 in) Electric-acoustic Specs Re 3.4 Ohm Fs 100 Hz Mms 5.8 g (0.2 oz) Cms 0.5 Bl 5.4 Qms 6.2 Qes 0,4 Qts 0.38 Vas 1.8 l (0.06 ft) LE 0.32 mH General Weight 0.5 kg Dimensions Dimension A 119 mm (4.69 in) Dimension A3 143 mm Dimension B 100 mm (3.94 in) Dimension C 67.5 mm (2.66 in) Dimension D 39 mm (1.54 in)