AUDISON Prima Line - 5X7" 2-Way 4 Ohm Component Speaker...
$469.99
APK 570 systems is ideal for car models with doors equipped to house elliptical speakers featuring 5×7 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 570.The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier.The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients.The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.
Specs
Comp 2 way System
Size 5 x 7 in. Woofer
26 mm (1 in.) Tweeter
46,5 x 37,5 x 20,1 mm (1.83 x 1.47 x 0.8 in.) Crossover
Power Handling 100 W Continuous Power
300 W Peak Power
Impedance 4 Ω
Frequency Response 55 – 20k Hz
Sensitivity 93,5 dB/Spl
AUDISON Prima Line - 6.5" + 4" 3-Way 4 Ohm...
$524.99
APK 163
Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Technical Data
Comp
3 way System
Size
165 mm (6.5″) Woofer100 mm (4″) Midbass26 mm (1″) Tweeter46,5 x 37,5 x 20,1 mm (1.83″ x 1.47″ x 0.8″) APCX TW Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX MD Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX WF Crossover
Power Handling
125 W Continuous Power375 W Peak Power
Impedance
4 Ω
Frequency Response
50 – 20k Hz
Sensitivity
93,5 dB/Spl
Technical Specifications
Specification
Details
Woofer Size
165 mm (6.5 in.)
Midbass Size
100 mm (4 in.)
Tweeter Size
26 mm (1 in.)
Power Handling (Peak)
375 Watts
Power Handling (Continuous)
125 Watts
Impedance
4 Ohm
Frequency Response
50 Hz – 20 kHz
Crossover Type
LP @ 600 Hz – 6 dB/OctHP @ 600 Hz / 3.5 kHz – 6/6 dB/OctHP @ 3.5 kHz – 6 dB/Oct
Component Adjustment
0 to +2 dB
Magnet Size
Component
Magnet Size (mm)
D × H (in.)
Woofer
85 × 40 × 15
3.35 × 1.57 × 0.59
Midrange
70 × 32 × 10
2.75 × 1.26 × 0.39
Tweeter
19 × 13
0.75 × 0.12
Weight (per speaker)
Component
Weight kg (lb)
Woofer
0.78 kg (1.72 lb)
Midbass
0.40 kg (0.88 lb)
Tweeter
0.04 kg (0.09 lb)
Voice Coil Diameter
Component
Ø mm (in.)
Woofer
32 mm (1.26 in.)
Midbass
25 mm (1 in.)
Tweeter
20 mm (0.8 in.)
AUDISON Prima Line - 6.5" 2-Way 2 Ohm Component Speakers...
$524.99
6.5″ 2-Way Component Speakers
The Audison Prima APK 165 2 ohm system features 2 crossovers dedicated to woofer and tweeter and separated, to ease the installation. APCX WF ohm2 crossover shapes AP 6.5 ohm2s frequency response to match it optimally with AP 1 tweeter; it also employs a Low ESR inductor, essential to maximize the power transfer to the 2 ohm coil. APCX TW ohm2 tweeter crossover, instead, is provided with the Hi-Contour function, to enhance the high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.
Features:
2 Ω impedance, to fully exploit the 65 W power per channel at 2 Ω of the AP8.9-bit amplifier.
75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
25 mm mobile voice coil to maximize efficiency achieving 95 dB.
10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.
APCX WF 2Ω dedicated woofer crossover with low-loss voice coils to shape the frequency response for an optimal match with the tweeter.
APCX TW 2Ω tweeter crossover featuring the Hi-Contour function to enhance high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.
AP 1 tweeter with an acoustic lens designed to balance the frequency response in the 10kHz 13kHz range, to optimize the product’s acoustic emission in critical OEM placements, where the product performance is affected by the presence of the factory grille.
Connection cable integrated into the passive crossover and terminated with fast-on connectors conforming to OEM integration. The terminations, which are different at each of the two poles, eliminate any possible connection errors, speeding up the installation process and making it safe over time.
AP 6.5 2Ω woofer featuring water-repellent treated paper cone, with profile developed with FEM simulation technology and optimized with Klippel Scan Vibrometer.
Woofer with reduced mounting depth, providing ease of installation in OEM placements.
Woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
Woofer with compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system.
Woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
Developed with the KLIPPEL suite.
Specifications:
Woofer Size: 165 mm
Tweeter Size: 26 mm
Woofer Voice Coil Diameter: 25 mm
Tweeter Voice Coil Diameter: 20 mm
Crossover Type: Cut Off @ 4.5 / 5 kHz
Magnet Size Woofer: 85 x 32 x 15
Power Handling – Peak: 300 W
Power Handling – Continuous: 100 W
Impedance: 2 Ohm
Frequency Response: 50 ÷ 20k
Crossover Cut Off: @ 4.5 / 5 kHz
Adjustment Tweeter Level: +2; 0
Woofer Cone Diameter: 127 mm
Xmax Woofer: 2.8 mm
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Coaxial Speakers...
$229.99
APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter.The cones surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity.
Technical Specs LF
Woofer Size
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
210 W
Power Handling - Continuous
70 W
Frequency Response
60 ÷ 23k
Voice Coil Diameter
32 mm (0.59 in)
Magnet Size
85 x 40 x 15
Xmax
2 mm (1.26 in)
Technical Specs HF
Tweeter Size
24 mm (0.94 in)
Sensitivity
94 dB
Voice Coil Diameter
15 mm (0.59 in)
Electric-acoustic Specs
Re
3.1 Ohm
Fs
80 Hz
Mms
11.5 g (0.41 oz)
Cms
0.33
Bl
4.6
Qms
5.4
Qes
0,84
Qts
0.73
Vas
8.1 l (0.29 ft)
LE
0.1 mH
General
Weight
0.87 kg
Dimensions
Dimension A
165 mm (6.5 in)
Dimension B
141 mm (5.55 in)
Dimension C
60 mm (2.36 in)
Dimension D
57 mm (2.24 in)
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Component Speakers...
$524.99
6.5″ 2-Way Component Speakers
The new Audison Prima APK 165 P two-way loudspeaker system, capable of handling up to 345 W peak, is the ideal combination to fully exploit the power of the AP F8.9 bit or all other Prima amplifiers used in high power configurations. The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The woofer has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency.
Features:
AP 1P
AIF technology (Any Install Faceplate) for total application versatility and a significant reduction in installation time.
Three mounting accessories supplied to provide a solution for any type of installation.
Magnetic group with double Neodymium tablet for an excellent high frequency extension.
1 CCAW voice coil for superior dynamic response.
Dome profile optimized with FEM simulations for a wide off-axis dispersion.
AP 6.5P
Increased excursion of the mobile group for a superior dynamic response.
Optimized electro-acoustic parameters to maximize performance for OEM placements.
Magnetic group sized for perfect control even at maximum cone excursion.
CCAW (Copper-Clad Aluminium Wire) voice coil (32 x 14 mm) to optimally manage the greater applied power.
Compact size basket for easy OEM installations.
APCX P 2T, APCX P 2W
Separate ultra-compact crossovers for tweeters and woofers to minimize space requirements and simplify cable routing, facilitating the specialist work.
Use of components selected and sized for the management of high power avoiding saturation.
Asymmetric slope filtering, 12 dB/oct on the tweeter and 6 dB/oct on the woofer for an optimal balance between the two components
Specifications:
Woofer Size: 165 mm
Tweeter Size: 29 mm
Woofer Voice Coil Diameter: 32 mm
Tweeter Voice Coil Diameter: 25 mm
Magnet Size Woofer: 100 x 40 x 18
Power Handling – Peak: 345 W
Power Handling – Continuous: 115 W
Sensitivity: 92.5 dB
Impedance: 4 Ohm
Frequency Response: 50 ÷ 24k
Crossover Woofer: Low-Pass: 4 kHz @ 6 dB/Oct
Crossover Tweeter: Hi-Pass: 4 KHz @ 12dB/Oct.
Adjustment Tweeter Level: Tweeter Level; 0 / +3
Woofer Cone Diameter: 132 mm
Xmax Woofer: 5.6 mm
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Component Speakers...
$374.99
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Technical Specs LF
Woofer Size
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
300 W
Power Handling - Continuous
100 W
Frequency Response
60 ÷ 20k
Voice Coil Diameter
32 mm (1.26 in)
Magnet Size
85 x 40 x 15
Crossover Level Adjustment
+2; 0
Technical Specs HF
Tweeter Size
26 mm (1 in)
Voice Coil Diameter
20 mm (1.26 in)
Electric-acoustic Specs LF
Re
3.1 Ohm
Fs
80 Hz
Mms
12 g
Cms
0.31
BL
4.7
Qms
4.7
Qts
0.7
Vas
7.6 l
Le
0.23 mH
Spl
93.5 dB
Xmax
2.5 mm (0.1 in)
Kit Tech Data
Crossover Hi-Pass
HP @ 3,5 kHz - 6 dB Oct
Cone Diameter
129 mm
General
Weight Woofer
0.78 kg
Weight Tweeter
0.04 kg
AUDISON Prima Line - 6X9" 2-Way 4 Ohm Component Speaker...
$469.99
APK 690 - KIT 2Way AP 1+AP 690+XOVERAPK 690 systems are ideal for car models with doors equipped to house elliptical speakers, featuring 6×9 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 690. The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation. The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.Tweeter -• 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.• Acoustic lens designed to compensate for the in-car frequency response in the 10kHz - 13kHz bandwidth caused by critical OEM placements.Woofer -• 25 mm pure copper voice coil, for high power handling and outstanding low frequency control.• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.• Reduced mounting depth, providing ease of installation in OEM placements.• “Triple Wave” surround profile for maximum excursion linearity.• Compact basket, protected by abrasion-resistant and scratchproof coating, the motor affixed with damping epoxy adhesive.• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection.
Attribute
Details
Brand
Audison
Condition
NEW
Type
Component
Fitment Size
6x9 Component Set with 1in Tweeter
Power Handling (RMS / Continuous)
100W
Power Handling (Peak)
300W
RMS Wattage Per Speaker
250
Impedance
4 Ohms
Frequency Response
40 – 20k Hz
Sensitivity
95 dB/SPL
Manufacturer SKU
69051090
UPC
8018823129695
ASIN
B07V7FRS4P
Bundle
No
Shipping
Free 2-Day Shipping
Weight
6.39 lbs
AUDISON Prima Line - 6X9" 3-Way 4 Ohm Coaxial Speakers...
$259.99
The APX 690 features an exclusive 40 mm horn loading dome tweeter that contributes to maximize efficiency up to 96dB SPL and an acoustics lens specifically designed and applied to the tweeter to increase dispersion in the high frequency range.To strengthen the emission of very high frequency ranges otherwise affected by off-axis positioning compared to the listening point, the APX 690 featuring a supertweeter.
Technical Specs LF
Woofer Size
690 mm
Impedance
4 Ohm
Power Handling - Peak
300 W
Power Handling - Continuous
100 W
Elliptical Size
6 x 9
Sensitivity
96 dB
Frequency Response
40 - 23k
Voice Coil Diameter
25 mm (0.79 in)
Magnet Size
90 x 32 x 15
Xmax
3.5 mm (0.98 in)
Technical Specs HF
Tweeter Size
40 mm (1.57 in)
Voice Coil Diameter
20 mm (0.79 in)
Super Tweeter Size
15
Electric-acoustic Specs
Re
3.2 Ohm
Fs
60 Hz
Mms
16.6 g (0.59 oz)
Cms
0.5
Bl
5.3
Qms
6.7
Qes
0,7
Qts
0.6
Vas
36 l (1.27 ft)
LE
0.2 mH
General
Weight
1.225 kg
Elliptical B1
222 mm
Elliptical B2
151 mm
Elliptical Dimension A1
238 mm
Elliptical Dimension A2
162 mm
Dimensions
Dimension A1
238 mm
Dimension A2
162 mm
Dimension C
96 mm (3.78 in)
Dimension D
81 mm (3.19 in)
Dimension F
25
Dimension B1
222 mm
Dimension B2
151 mm
Dimension E1
276 mm
Dimension E2
202 mm
AUDISON Prima Line - Ap Bit Automatic Speaker Presence (Asp)
$134.99
AUDISON AP BIT - Automatic Speaker Presence
AP bit Automatic speaker presence adapter
Resistance for OEM radios/amplifiers in combination with AP bit processors
Usually used on the rear channels when the signal level can not be set
In order to solve the problem associated with OEM amplifiers that feature signal interruption, shutting down when a proper speaker “load” is not present as often found in aftermarket integration, the Prima amplifiers feature ASP (Automatic Speaker Presence). Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the hea
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4E)
$469.99
The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front or the upgrade of the rear system. The 100 mm (4 in.) APBMW X4E, with basket and fixing screws dedicated to the specific car model, feature a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties, offers optimized dispersion features for OEM placement, elevating the sound stage to a realistic level.
Technical Specs LF
Woofer Size
100 mm
Impedance
4 Ohm
Power Handling - Peak
80 W
Power Handling - Continuous
40 W
Sensitivity
88 dB
Frequency Response
100 ÷ 22k
Voice Coil Diameter
25 mm (0.79 in)
Magnet Size
50 x 29 x 3
Xmax
0.5 mm (0.98 in)
Technical Specs HF
Tweeter Size
24 mm (0.94 in)
Voice Coil Diameter
20 mm (0.79 in)
Electric-acoustic Specs
Re
3.4 Ohm
Fs
100 Hz
Mms
5.8 g (0.2 oz)
Cms
0.5
Bl
5.4
Qms
6.2
Qes
0,4
Qts
0.38
Vas
1.8 l (0.06 ft)
LE
0.32 mH
General
Weight
0.5 kg
Dimensions
Dimension A
119 mm (4.69 in)
Dimension A3
143 mm
Dimension B
100 mm (3.94 in)
Dimension C
67.5 mm (2.66 in)
Dimension D
39 mm (1.54 in)
AUDISON Prima Line - Oem Coaxial Speaker (Apbmw X4M)
$469.99
The APBMW X coaxials have been designed for BMW-MINI models that do not allow the installation of a two-way system on the front of the upgrade of the rear system. The 100 mm (4 in.) APBMW X4M, with basket and fixing screws dedicated to the specific car model, features a water-repellent pressed-paper cone for natural and color-free mid-range frequencies. The 20 mm coil and Tetolon dome tweeter, a material boasting lightness and damping properties offer optimized dispersion features for OEM placement, elevating the sound stage to a realistic level.
Technical Specs LF
Woofer Size
100 mm
Impedance
4 Ohm
Power Handling - Peak
80 W
Power Handling - Continuous
40 W
Sensitivity
88 dB
Frequency Response
100 ÷ 22k
Voice Coil Diameter
25 mm (0.79 in)
Magnet Size
50 x 29 x 3
Xmax
0.5 mm (0.98 in)
Technical Specs HF
Tweeter Size
24 mm (0.94 in)
Voice Coil Diameter
20 mm (0.79 in)
Electric-acoustic Specs
Re
3.4 Ohm
Fs
100 Hz
Mms
5.1 g (0.18 oz)
Cms
0.53
Bl
5
Qms
7.1
Qes
0,42
Qts
0.4
Vas
1.9 l (0.07 ft)
LE
0.32 mH
General
Weight
0.4 kg
Dimensions
Dimension A
102 mm (4.02 in)
Dimension B
91 mm (3.58 in)
Dimension C
63.5 mm (2.5 in)
Dimension D
44.5 mm (1.75 in)
AUDISON Prima Line - Oem Component Speaker (Apbmw K4E)
$574.99
The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Frequency Response
90 ÷ 23k
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.3 g
Cms
0.5
BL
4.8
Qms
8.2
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Crossover Low-Pass
Hi-Pass: 6 KHz @ 6dB/Oct.
Cone Diameter
80 mm
General
Weight Woofer
0.46 kg
Weight Tweeter
0.06 kg
AUDISON Prima Line - Oem Component Speaker (Apbmw K4M)
$574.99
The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Type
89 Crossover Type Hi-Pass: 6 KHz @ 6dB/Oct.
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.4 g
Cms
0.5
BL
4.8
Qms
8.9
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Cone Diameter
80 mm
General
Weight Woofer
0.426 kg
Weight Tweeter
0.06 kg
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E)
$189.99
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
AUDISON Prima Line - Speaker Output Harness (Ap Spk Out...
$114.99
Audison AP SPK OUT 8.9 - PPRIMA Series 8-Channel, Speaker Output extension cable Plug & Play for AP8.9 bit
We are a Audison authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
• Audison Prima AP SPK Out 8.9
Plug&Play Connector
AP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
AUDISON Thesis Line - 3.0" Midrange Speakers - Pair (Th...
$1,784.99
TH 3.0 II voce - SET MIDRANGE 70mm + GRILLES.The human auditory system processes the range of medium frequencies with maximum sensitivity and selectivity because it makes the voice intelligible from the rest of the audio spectrum. The R&D team started from this simple principle to design from scratch the TH 3.0 II VOCE, dedicated to this fundamental range of frequencies, with the simple as well as ambitious target of extreme linearity, in order not to add or hide anything of the signal reproduced, enhancing in this way every nuance. The extremely powerful custom N38 “H-grade” Neodymium magnet ensures unmatched control of the mobile group and the aluminium ring nullifies the intermodulation distortion otherwise generated at peak excursions.Features -• 30,5 mm mobile voice coil in CCAR (Copper Clad Aluminum Ribbon) wound with flat wire to maximize the force factor and heat dissipation.• Aluminium demodulation ring which linearizes the high excursion intermodulation distortion, canceling any sound colorations.• N38 "H-grade neodymium magnet included in the voice coil to obtain superior control of the mobile crew and superior thermal stability.• Motor geometry designed using finite element simulation software to optimize efficiency by concentrating the magnetic field in the gap.• Membrane made of TPX®, a transparent material that reduces frequency response irregularities and provides a view of the inside of the speaker.
Technical Specs
Nominal diameter
70 mm (3 in)
Impedance
4 Ohm
Power Handling - Peak
110 W
Power Handling - Continuous
55 W
Sensitivity
85.6 dB
Frequency Response
110 ÷ 5700 Hz
Voice Coil Ø
30.5 mm
Magnet Material
SPECIAL NEODYMIUM N38H
Magnet size D x d x h
29 x 6 x 8 mm
Voice Coil Material
CCAP - COPPER CLAD ALUMINIUM RIBBON
Xmax
3.3 mm (0.13 in)
Electric-acoustic Specs
Re
3.4 Ohm
Fs
100 Hz
Le
0.18 mH
Vas
1.01 l (0.036 ft)
Mms
4.3 g (0.152 oz)
Cms
0.59 mm/N
BL
4.2 T•m
Qts
0.48
Qes
0,52
Qms
5.5
General
Weight
0.25 kg
Dimensions
Dimension A
84 mm (3.31 in)
Dimension B
73.5 mm (2.89 in)
Dimension C
45 mm (1.77 in)
Dimension D
37 mm (1.46 in)
Dimension E
89 mm
Dimension F
18
Frequency Response
AUDISON Thesis Line - 6.5" Mid-Range / Midbass Speakers -...
$2,099.99
Audison Thesis TH 6.5 II SAX is a masterpiece of acoustic engineering, designed to ensure extraordinary precision and transparency in sound reproduction. With a diameter of 165 mm, this midrange woofer has been developed to exceed the limits imposed by traditional designs, pushing sound performance to the highest levels without compromise. The heart of the TH 6.5 II SAX is the powerful H-grade neodymium magnet, which generates an extremely stable magnetic field and outstanding energy efficiency, essential for achieving exceptional sound dynamics. The design of the magnetic circuit, optimized through advanced simulation software, focuses the magnetic field to maximize transducer efficiency, offering a fast and accurate response even in delicate mid-range frequencies. Particular attention has been given to the suspension system, a critical element for controlling cone movement. The spider, made of a mix of highly elastic fibers, allows for a linear and distortion-free excursion even under intense use. Similarly, the natural rubber surround is optimized to enable wide cone excursions without mechanically compressing the sound, preserving fidelity to the original source. The 50 mm mobile coil, wound with flat wire in CCAR (Copper Clad Aluminum Ribbon), not only maximizes the force factor but also provides excellent heat dissipation, preventing overheating and ensuring stable performance over time. This technical detail contributes to the total absence of thermal compression, a crucial aspect for maintaining consistent audio quality, even during prolonged listening sessions. The aluminum alloy basket, designed to eliminate unwanted vibrations, further enhances sound clarity. Its structure, with a system of four pairs of spokes, not only offers great structural rigidity but also minimizes air resistance, avoiding aerodynamic compression phenomena that could affect midrange frequencies. In summary, the Audison Thesis TH 6.5 II SAX is much more than just a speaker: it is a concentrate of technological innovation and refined design, created to offer an unparalleled sound experience. Every component has been carefully studied to minimize any form of distortion and compression, ensuring a pure, detailed, and incredibly faithful sound reproduction.
Technical Specs
Nominal diameter
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
300 W
Power Handling - Continuous
150 W
Sensitivity
87 dB
Frequency Response
40 ÷ 4500 Hz
Voice Coil Ø
50 mm
Magnet Material
NEODYMIUM
Magnet size D x d x h
80 x 54 x 4,5 mm
Voice Coil Material
CCAP - COPPER CLAD ALUMINIUM RIBBON
Cone Material
TPX®
Xmax
5.4 mm (0.21 in)
Electric-acoustic Specs
Re
3.8 Ohm
Fs
55 Hz
Le
0.43 mH
Vas
8.6 l (0.304 ft)
Mms
24.2 g (0.854 oz)
Cms
0.35 mm/N
BL
8.2 T•m
Qts
0.43
Qes
0,47
Qms
5.3
General
Weight
1.25 kg
Dimensions
Dimension A
165 mm (6.5 in)
Dimension B
143 mm (5.63 in)
Dimension C
84 mm (3.31 in)
Dimension D
74.5 mm (2.93 in)
Dimension E
170.5 mm
Dimension F
30
AUDISON Voce Ii - 3" Midrange Speakers - Pair (Av...
$999.99
The Audison VOCE II AV 3.0 II mid-range speaker is meticulously crafted to deliver exceptional clarity and rich detail in the crucial mid-frequency range. Featuring a specialized cone made from pressed paper with cotton fibers, the AV 3.0 II offers an ideal balance of rigidity and responsiveness, enhancing sound reproduction for today’s car audio enthusiasts. This mid-range unit integrates seamlessly into any system with its compact design and is equipped with OEM-style connectors, ensuring straightforward and versatile installation options.
Technical Specs
Nominal diameter
70 mm (3 in)
Minimum Impedance
3.2 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Sensitivity
90 dB
Frequency Response
160 ÷ 13000 Hz
Voice Coil Ø
26 mm
Chassis Material
ALUMINIUM
Magnet Material
NEODYMIUM
Magnet size D x d x h
24.9-6 mm
Voice Coil Material
CCAW
Former Material
GLASS FIBER
Cone Material
SEMI-PRESSED PAPER
Surround Material
RUBBER
Xmax
1.4 mm (0.06 in)
Xmech
3.2 mm (0.13 in)
Voice Coil Winding Height
5.3 mm (0.21 in)
Gap Height
4.5 mm (0.18 in)
Crossover name
no
Electric-acoustic Specs
D
35.6 cm² (5.518 in²)
Re
2.9 Ohm
Fs
150 Hz
Le
0.1 mH
Vas
0.61 l (0.022 ft)
Mms
2.9 g (0.102 oz)
Cms
0.39 mm/N
BL
3.5 T•m
Qts
0.58
Qes
0.65
Qms
5.45
Flux Density
0.78
General
Weight
0.15 kg
Dimensions
Dimension A
84 mm (3.31 in)
Dimension B
73 mm (2.87 in)
Dimension C
35 mm (1.38 in)
Dimension D
31.2 mm (1.23 in)
Hole diameter
3.5 mm
Frequency Response
AUDISON Voce Ii - 6.5" 2-Way 4 Ohm Active Speakers...
$1,199.99
The Audison VOCE II AVK 6A P II system, engineered for dynamic performance, integrates the AV 1.1 II Hi-Res Tweeter and AV 6.5 P II Mid-Bass component. This combination achieves extraordinary power handling up to 150W RMS, attributed to the 1.6 in. (40 mm) CCAW voice coil that ensures exceptional durability and dynamic response. The system excels in delivering powerful mid-bass performance, capturing the full essence of music with clarity and precision. Enhanced installation flexibility is provided by OEM-style and Faston connectors, ensuring seamless integration into any vehicle setup.
AUDISON Voce Ii - 6.5" 2-Way 4 Ohm Coaxial Speakers...
$799.99
The Audison VOCE II AVX 6.5 coaxial speaker is a standout component in the VOCE II line, offering a unique combination of a 6.5-inch woofer and a 1-inch Hi-Res certified dome tweeter. Achieving Hi-Res Audio certification for a coaxial setup is particularly significant, reflecting the meticulous design of every element from the grille to the basket. Designed for bi-amplification, this speaker can be actively optimized with a DSP while maintaining the flexibility of separate passive crossovers for each driver. It also includes versatile OEM-style connectors, enhancing integration and performance in any vehicle setup.
Technical Specs LF
Woofer Size
165 mm (6.5 in)
Impedance
4 Ohm
Minimum Impedance
3.1 Ohm
Power Handling - Peak
240 W
Power Handling - Continuous
120 W
Sensitivity
91.5 dB
Frequency Response
45 ÷ 40000
Voice Coil Diameter
40 mm (1.6 in)
Chassis Material
ALUMINIUM
Magnet Material
HIGH DENSITY FLUX FERRITE
Magnet Size
100-45-18
Voice Coil Material
CCAW
Former Material
GLASS FIBER
Cone Material
SEMI-PRESSED PAPER
Surround Material
RUBBER
Flux Density
0.84
Xmax
4.95 mm (1.57 in)
Xmech
7.5 mm (0.3 in)
Gap Height
6 mm (0.24 in)
Voice Coil Winding Height
13 mm (0.51 in)
Technical Specs HF
Tweeter Size
25.4 mm (1 in)
Impedance
4 Ohm
Minimum Impedance
3.7 Ohm
Program Power
20 W
Aes Power Rating
10 W
Sensitivity
98 dB
Frequency Response
1500 - 40000
Voice Coil Diameter
25 mm (0.98 in)
Voice Coil Material
CCAW
Former Material
ALUMINIUM
Dome Material
TETOLON FIBRE
Surround Material
TETOLON FIBRE
Magnet Material
NEODYMIUM
Electric-acoustic Specs
D
128.35 cm² (19.89 in²)
Re
2.9 Ohm
Fs
67 Hz
Mms
14.9 g (0.53 oz)
Cms
0.38
Bl
5.4
Qms
8
Qes
0.62
Qts
0.58
Vas
9.1 l (0.32 ft)
LE
0.3 mH
Reference Efficiency
90.5
General
Weight
1.6 kg
Dimensions
Dimension A
165 mm (6.5 in)
Dimension B
140 mm (5.51 in)
Dimension C
74.2 mm (2.92 in)
Dimension D
69.8 mm (2.75 in)
Frequency Response
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
