FOCAL Inside Ford Y-Iso Harnesst-Harness Adapter For An Impulse Amplifier...
$100.00
FOCAL INSIDE FORD Y-ISO HARNESST-HARNESS ADAPTER FOR AN IMPULSE AMPLIFIER
Inside upgrade harness
Focal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their Impulse 4.320 4-channel amp. Focal also offers a variety of cables and connectors that you'll need, including:
speaker wire harnesses for tweeters, subs, and center channel;
T-harnesses that connect the vehicle and factory radio to the upgrade system;
and extension cables to connect the T-harness to the amplifier.
This T-harness provides the upgrade connections between your select Ford vehicle and a Focal Impulse 4.320 amplifier by way of the appropriate extension cable (see below).
Product highlights:
Ford T-harness for a Focal Inside system upgrade
provides connections for an Impulse 4.320 amplifier
IMP EXT ISO 5' Extension Cable
accessory power and ground connections available
warranty: 1 year
MFR # IW FORD Y-ISO
Item # 091FORYISO
Features
Overview: This vehicle specific harness simplifies adding the Focal Impulse 4.320 amplifier to a compatible vehicle. The ISO extension cable (item number 091IMPEXT1, sold separately) must also be added to connect the amp. This adapter supplies the amp with a speaker level signal input, power, and ground, and connects the amp's output to the factory speaker wiring. (Power and ground for the amp are connected using the attached crimp connectors.) Please enter your vehicle information to confirm compatibility.
What's in the box:
Focal Inside vehicle specific adapter harness
FOCAL Inside Nissan Y-Iso Harness Head Unit Adaptation Cable -IW-NIS-YISO
$100.00
FOCAL INSIDE NISSAN Y-ISO HARNESS HEAD UNIT ADAPTATION CABLE
The Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 0.9ft (0.3m)
Compatibility: for Nissan vehicles since 2008
FOCAL Mercedes Benz Iso Cable Harness -IW-MBZ-YISO
$120.00
The Focal Inside I IW MBZ Y-ISO HARNESS car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Mercedes original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : E-class from 2016, S-class from 2013, C-class from 2014 until 2019
FOCAL Peugeot, Head Unit To Iso Connectors | -IW-PSA-YISO
$100.00
IW PSA YISO HARNESS | Plug & Play Adapter for Citroën, DS & Peugeot | Impulse 4.320 Compatible
Seamless Integration. Factory Fit. Focal Precision.
The Focal IW PSA YISO HARNESS is a dedicated Plug & Play head unit adapter engineered for Citroën, DS Automobiles, and Peugeot vehicles. Designed specifically for the Focal Impulse 4.320 amplifier, it provides an effortless, OEM-grade connection between your vehicle’s original head unit and Focal Inside extension cables.
This precision-built harness allows fast and secure installation—no cutting, soldering, or modification required. Its ISO-standard connectors ensure a perfect fit and clean signal transfer, making it the ideal solution for achieving superior amplified sound while preserving your vehicle’s factory wiring integrity.
Key Features
• Designed for the Focal Impulse 4.320 digital amplifier• Plug & Play connectivity for Citroën, DS Automobiles & Peugeot• OEM-grade connectors for factory-fit reliability• Quick, clean installation – no soldering required• Direct link from head unit to amplifier• Length: 0.9ft (0.3m)• Compatible with vehicles manufactured since 2014
Note: Plug & Play harnesses are designed for use with factory head units only. For aftermarket systems, please use a standard wiring kit.
Focal IW PSA YISO – Factory Integration. Amplified by Focal.
FOCAL Renault Cable Harness -IW-REN-YISO
$100.00
The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 0.9ft (0.3m)
Compatibility: for Renault and Dacia vehicles since 2000
FOCAL Speaker Accessory -BAM XL
$169.00
FOCAL BAMXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx2m)
Honeycombed damping material
Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and then increases the speaker performance.
Aluminum sheet
essential component to the sandwich effect realization. This process permits to increase the performance of the viscoelastic complex.
Viscoelastic complex
Self-adhesive, the butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car. Less noise means more music.
Content: 50 x 200cm sheet
FOCAL Stereo Amplified Signal Converter -Hi-Lo V3
$105.00
In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3.
HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units.
Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.
FOCAL Volkswagen 180Mm Speaker Spacer Kit, Adapts Isu200 To 7.1”...
$110.00
"FOCAL INSIDE IW T3Y 2008"" WOOFERS FOR SELECT TESLA VEHICLES
Improve the bass kick in your Tesla
You enjoy the many benefits of your Tesla, but the bass response from the factory speakers may not be as electrifying as you'd like. But now the Inside Series brings Focal's famous sound to your electric vehicle. The best news of all is that Focal designs and builds these woofers to fit perfectly into Tesla Model 3 and Model Y vehicles. All the necessary mounting hardware is included, and integrated connectors connect to your existing factory speaker plugs — no cutting, splicing, or vehicle modifications required.
This rear image of the woofer shows off the stiff flax weave that stays lightweight, so it's easier to drive.
Famous Focal sound
Focal incorporates their innovative flax woofer cones into the Inside IW T3Y 200 8"" woofers. Focal discovered that a flax woofer cone produces a dynamic sound that's worthy of its reputation. At half the weight of fiberglass, these flax fibers help create a very rigid yet lightweight cone that ensures accuracy and limits unwanted vibrations. This efficient design means you'll get more accurate, punchy bass from your music.
Product highlights:
two 8"" woofers
designed to fit Tesla Model 3 and Model Y vehicles
Tesla-specific wire connectors (no cutting required)
8"" flax woofer cone with butyl rubber surround
neodymium magnets and 1.5"" voice coils
impedance: 4 ohms
power handling: 75 watts RMS (150 watts peak)
frequency response: 40-1500 Hz
sensitivity: 91 dB
grilles not included
warranty: 1 year
MFR # IW T3Y 200
Item # 091IWT3Y20
Features & specs
General
Speaker Size
Vehicle-specific
Design
1-way
Tweeter Design
---
Impedance (Ohms)
4
Tweeter Composition
---
Woofer Composition
Flax
Woofer Surround
Butyl Rubber
Parts Warranty
1 Year
Labor Warranty
1 Year
Specifications
Sensitivity (1W at 1 meter)
N/A
Sensitivity at 2.83 volts
91
Frequency Response
40 - 1.5k Hz
Minimum RMS Wattage
---
Maximum RMS Wattage
75
Peak Power Handling (Watts)
150
Top-mount Depth (Inches)
1 3/8
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
3 3/4
Mounting Height (Inches)
1.375
Frame Width
8.44
Frame Length
8.44
What's in the box:
2 Woofers
Quick start guide (English/ French/ German/ Italian/ Spanish/ Portugese/ Dutch/ Polish/ Russian/ Chinese/ Korean/ Japanese/ Arabic)
Focal window sticker
2 Adhesive backed Focal Inside badges
"
FOCAL Wiring Harnesses For Inside Packs -IW-IMP2.1
$120.00
The Focal Inside IW IMP 2.1 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL Wiring Harnesses For Inside Packs -IW-IMP2.2
$120.00
The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Imp2.1 -IW-BMW-IMP2.1
$150.00
Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness
The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple.
This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Yiso -IW-BMW-YISO
$100.00
The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables.
* Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer.
Additional Information
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 3.28ft (1 m)
FRONT RUNNER 10 Led Light Bar Vx250-Fl / 12V/ 24V...
$130.50
$145.00
Keep your adventure going after the sun sets with this 10” LED Light Bar. The ECE compliant high performing LED creates a strong 3000 Kelvin flood beam pattern so your trail will always be well-lit.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aids in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislations of the countries must be observed.
Secures to your Front Runner Roof Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
Connect you 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to a Roof Rack Power Point*, powered by Hella Extension Cord - 3m/10'* power cord from your vehicles 12V accessory outlet.
*Note: The Roof Rack Power Point and Hella Extension Cord - 3m/10' are sold separately.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Lightbar1 x Yellow cover1 x Bracket set1 x Bolt Kit
Product Dimensions:Light Bar:275mm (10.8") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with supplied bracket:328mm (12.9") L x 67mm (2.6") D x 55mm (2.2") H
Weight:875g (27.3oz)
Special Notes:Product type: On-road and off-roadSKU: LEDWL 115-FLFRLED supplier: OSRAMLumens: 150012/24V30W2.5 AmpsColor temperature: 3000 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: R112
FRONT RUNNER 10 Led Light Bar Vx250-Sp / 12V/ 24V...
$157.50
$175.00
Don’t let darkness throw shade on your adventures. Keep exploring after nightfall with the 10" LED Light Bar. The high-performance LEDs with OSRAM technology, throw 1500 lumens over 37m. It features an intelligent reflector design that diverts the light from the LEDs so that oncoming traffic is not directly exposed to the light; as well as an additional yellow cover, that won’t attract insects to your campsite.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislation of the countries must be observed.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
The mounting bracket includes side guards to protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Fitment guide and installation hardware included.
Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
FRONT RUNNER 10" Led Light Bar - LIGH900
$117.00
$130.00
Brighten up the road ahead and extend your adventures into the later hours with the 10” LED Light Bar. The light bar is constructed for durability and designed for versatility, both mounted onto Front Runner roof racks and for other off-vehicle uses.
Six high-performance LEDs provide better visibility with 2520 raw lumen and 6000 kelvin color.
Provides 120 degree flood beam pattern for close but wide range illumination immediately surrounding the vehicle.
This auxiliary light is equipped with a robust polycarbonate lens set in a die cast aluminum housing.
The 12V/24V LED Light Bar is versatile in application and is not limited to automotive use only.
Special regulations and legislation within each country should be taken into consideration before use.
Expected LED life of 30,000 hours.
Secures to your Front Runner roof rack with the LED 10inch Light Bar Bracket.
Consists of:1 x 10" Light Bar1 x Bracket Set
Materials used:Diecast aluminum housingPolycarbonate lensZinc alloy brackets
Product Dimensions:Light Bar:270mm (10.6") L x 58mm (2.3") W x 56mm (2.2") H
Light Bar with supplied bracket:270mm (10.6") L x 58mm (2.3") W x 70mm (2.8") H
Weight:17.4 kg (38.4lbs)
Special Notes:6pcs*5w high intensity CREE LEDSPower Consumption: 30WOperating Voltage: 10-30 DCWaterproof rate: IP 67Raw Lumen: 2520lmEffective lumen: 1740lmCurrent draw:12V/2.40A；24V/1.12ALife span:30000HColor Temperature: 6000K
FRONT RUNNER 1255Mm Slat Add-On Kit - RRSAD1255
$101.70
$113.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1255mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
RRSAD1255 - 1255mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1255 - 1255mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.69kg (3.73lbs)Shipping Dimensions:Width: 110mm (4")Length: 1260mm (50")Height: 70mm (3")Shipping Weight:Weight: 2.07kg (5lbs)
FRONT RUNNER 1345Mm Slat Add-On Kit - RRSAG1345
$110.70
$123.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1345 - 1345mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.82kg (4.01lbs)Shipping Dimensions:Width: 110mm (4")Length: 1350mm (53")Height: 70mm (3")Shipping Weight:Weight: 2.17kg (5lbs)
FRONT RUNNER 1425Mm Slat Add-On Kit - RRSAJ1425
$116.10
$129.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1425mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1425 - 1425mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.93kg (4.25lbs)Shipping Dimensions:Width: 110mm (4")Length: 1430mm (56")Height: 70mm (3")Shipping Weight:Weight: 2.26kg (5lbs)
FRONT RUNNER 1475Mm Slat Add-On Kit - RRSAM1475
$119.70
$133.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1475mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1475 - 1475mm Slat
Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2kg (4.41lbs)Shipping Dimensions:Width: 110mm (4")Length: 1480mm (58")Height: 70mm (3")Shipping Weight:Weight: 2.36kg (5lbs)
FRONT RUNNER 1575Mm Slat Add-On Kit - RRSAP1575
$134.10
$149.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II rack tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.This slat will work with any Front Runner Slimline II Rack that is 1575mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
RRSAP1575 - 1575mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1575 - 1575mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.13kg (4.7lbs)Shipping Dimensions:Width: 115mm (5")Length: 1585mm (62")Height: 70mm (3")Shipping Weight:Weight: 2.45kg (5lbs)
FRONT RUNNER 4 Led Light Cube Mx85-Sp / 12V /...
$139.50
$155.00
Driving in the dark? The MX85-SP is a strong, reliable, LED high-beam headlight. The far field illumination makes it ideal to brighten any adventure.
Four (4) high-performance LED working light reaches a distance of 110m at a 13.5 degree angle with a color temperature of 6000 Kelvin producing daylight lighting conditions.
Dual lighting functions include the classic working light with up to 1250 lumen, and the other is a stylish X shape LED working.
Polycarbonate lens, durable to withstand off-road conditions.
Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.
12V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
Secures to your Roof Rack with 4" LED OSRAM Light Cube MX85-WD/MX85-SP Mounting Bracket.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Note: These powerful working lights are permitted only for off-road applications and must not be used on public roads.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Light cube with bracket1 x Bolt Kit
Dimensions:Light cube:85mm (3.3") L x 57mm (2.2") W x 85mm (3.3") H
Light cube with supplied bracket:85mm (3.3") L x 57mm (2.2") W x 121.5mm (4.8") H
Weight:500g (17.6oz)
Special Notes:Product type: Off-roadSKU: LEDDL101-SP / 4052899526532Lumens: 125012V22/2W1.83/0.17 AmpsColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
FRONT RUNNER 4 Led Light Cube Mx85-Wd / 12V /...
$139.50
$155.00
Driving on difficult terrain? The MX85-WD, is a strong, reliable, LED high-beam headlight. The near field illumination makes it ideal to navigate off-road trails.
Dual lighting functions include LED working light and the LED working spotlight that provides stylish X shape light.
Light beam reaches a distance of 55m at a 43.5 degree angle and delivers a luminosity of 1250 lumens.
Polycarbonate lens, durable to withstand off-road conditions.
Features an over and under voltage protection up to 18 volts.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.
Excellent compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
Secures to your Front Runner Roof Rack with 4" LED OSRAM Light Cube MX85-WD/MX85-SP Mounting Bracket.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Note: These powerful working lights are permitted only for off-road applications and must not be used on public roads.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Light cube with bracket1 x Bolt Kit
Product Dimensions:Light cube:85mm (3.3") L x 57mm (2.2") W x 85mm (3.3") H
Light cube with supplied bracket:85mm (3.3") L x 57mm (2.2") W x 121.5mm (4.8") H
Weight:500g (17.6oz)
Special Notes:Product type: Off-roadSKU:LEDDL101-WDLumens: 125012V22/2W1.83/0.17 AmpsColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
FRONT RUNNER 4"/100Mm Led Flood Light W/ Bracket - RRAC059
$157.50
$175.00
LED flood light for illumination around vehicle and campsite. Comes standard with Front Runner custom tiltable bracket for fitting to the front, side or rear of the Roof Rack.
LED flood light for illumination around vehicle and campsite.
Comes standard with Front Runner tiltable mounting bracket for fitting to the front, side or rear of the Roof Rack.
Powered by power cord from vehicle 12v accessory outlet (Hella Extension Cord - 3m/10').
Bracket has power inlet and outlet to power light and additional 12v accessories simultaneously.
Special regulations and legislation within each country should be taken into consideration before use.
Note: For compatibility with the Slimsport or Slimpro Van Rack the Slimsport Side Mount Accessory Bracket / Small, is required. *sold separatelyNote: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
7 Watt Square LED Light Specifications:Input Voltage: 9-32 Volts DCPower Consumption: 27 WattsAmperage Draw: 2.1 Amps @ 12 VLumen Output: Approx. 1700Beam Pattern: Flood PatternBeam Angle: 60 Degree FloodHousing Material: AluminumMounting Bracket: Steel powder coatedLens Material: Polycarbonate Dust Proof, Water Proof!
FRONT RUNNER 40 Led Light Bar Vx1000-Cb Sm Mounting Bracket...
$169.20
$188.00
Securely mount your 40" LED Light Bar (VX1000-CB) to the front or underneath your Front Runner Roof Rack with this Single Mount bracket. These brackets feature a protective cover to shield the light bar against small rocks.
Two sets of brackets that secure the 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount to the Front Runner Roof Rack.
Front Rack mounting brackets secure this light bar using the top T-slots of the front combined slat side profile, while the Under Rack mounting brackets secure it using the bottom T-slot of the front combined slat profile.
It comes with a robust front cover to protect the LED light bar from small rocks.
All components are made of steel and aluminum and sealed with the same durable, weather-resistant black powder coating as the Front Runner Roof Racks.
Includes all installation hardware and fitting instructions.
Consists of:1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 Front CoverInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:1070mm (42.1")L x 102mm (4")W x 58mm (2.3")HWeight:2.8kg (6.2lbs)
FRONT RUNNER Adjustable Rack Cargo Chocks - RRAC129
$103.50
$115.00
Front Runner's Adjustable Rack Cargo Chocks can be used to brace and secure a variety of gear on a Front Runner Rack.
These chocks wedge against and secure the corners or sides of your gear to prevent movement and rattling.
Adjustable along the slats to resize and fit a variety of gear like the Wolf Pack Pro, Cub Pack, Typhoon Bag, Expander Camping Chair, and water tanks.
Secures to your rack using Eye Nuts and supplied hardware.
Eye Nuts create lashing points to secure cargo using Stratchits*
*Note: Purchase Wolf Packs, Cub Packs, Stratchits etc. separately.
Consists of:4 x Rack Cargo Chocks4 x Eye NutsInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:100mm (3.9") L x 82mm (3.2") W x 42mm (1.7") H (Per Bracket)Weight:1.04kg (Per Set of 4)
FRONT RUNNER Axe Bracket - RRAC023
$112.50
$125.00
The lockable stainless steel cage keeps your axe head safe and out of the way when mounted to the side of the Front Runner Slimline II Roof Rack. Super simple installation – just slide the bolts and brackets into the side rail of the Slimline II Roof Rack Tray and tighten.
FRONT RUNNER Bat Wing/Manta Wing Awning Brackets - RRAC074
$148.50
$165.00
Easily mount your Manta Wing or Bat Wing Awning to a Slimline II roof rack with these sturdy Front Runner brackets.
These corrosion resistant brackets secure a Manta Wing or Bat Wing Awning to the side profile of a Slimline II roof rack.
No drilling required. The brackets simply bolt onto the t-slots in the side profile of your Slimline II Roof Rack.
Pre-drilled mounting points designed specifically for Manta/Bat Wing Awnings allow installation in mere minutes.
Made from steel and black powder coated with the same durable, weather resistant coating as the Slimline II Roof Rack.
Consists of:2x Awning bracketsBolt kitMaterials used:Black powder-coated steelProduct dimensions:L 152mm (6") x W 85mm (3.3") x H 198mm (7.8")Weight:2.8kg (6.2lbs)
FRONT RUNNER Cargo Slide Drop Down Table Bracket - TBRA057
$162.00
$180.00
Upgrade your cargo slide with this strong, steel bracket which is used to secure a Drop Down Table to either side of the slide. The bracket will transform your slide as the table is a super-useful surface on which to place drinks or prepare food.
A bracket to secure the *Drop Down Tailgate Table to the *Load Bed Cargo Slide / Medium or the *Load Bed Cargo Slide / Large.
This bracket bolts onto either the Left or Right side of your Load Bed Cargo Slide, to securely hold the *Drop Down Tailgate Table.
Made of high strength steel and sealed in the same weather resistant black powder-coating as Front Runner racks.
Note: This bracket is not suitable for front fitment or for fitment on the Load Bed Cargo Slide / Small. *Sold separately.
Consists of:3 x Mounting BracketsInstallation hardwareFitting instructions
Materials used:Black powder-coating high strength steel
Product Dimensions:690mm (27.2") L x 237mm (9.3") W x 47mm (1.9") H
Weight:1.89Kg (4.2lbs)
FRONT RUNNER Dometic Perfectwall Awning Angled Mounting Bracket - RRAC305
$187.20
$208.00
Dometic PerfectWall Awning Angled Mounting Bracket - RRAC305
Securely mount your Dometic PerfectWall Awning to your Front Runner Slimline II Roof Rack with the Dometic PerfectWall Awning Angled Mounting Bracket. Specifically engineered to provide the correct fit, clearance, and support, this bracket kit ensures a strong and reliable awning installation for touring, camping, and overlanding adventures.
The angled bracket design positions your awning correctly while maintaining proper alignment and clearance from the roof rack system. Manufactured from high-strength steel and finished in a durable black powder coating, these brackets are built to withstand harsh weather conditions, rough tracks, and long-term outdoor exposure.
Supplied as a complete mounting kit with all required hardware, installation is straightforward, allowing you to seamlessly integrate your Dometic PerfectWall Awning into your Front Runner rack setup.
Key Features
Designed specifically for Dometic PerfectWall Awnings.
Compatible with Front Runner Slimline II Roof Rack systems.
Angled bracket design provides correct fitment and clearance.
High-strength steel construction for maximum durability.
Black powder-coated finish for corrosion resistance.
Weather-resistant design suited for outdoor and off-road use.
Provides a secure and stable awning mounting solution.
Supplied with all required mounting hardware.
Benefits
Ensures proper awning positioning and alignment.
Provides a strong and reliable mounting platform.
Helps withstand vibrations and impacts during off-road travel.
Protects against rust and corrosion in harsh environments.
Allows seamless integration with Front Runner roof rack systems.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Compatibility
Dometic PerfectWall Awnings.
Front Runner Slimline II Roof Rack systems.
What's Included
Dometic PerfectWall Awning Angled Mounting Brackets.
Complete mounting hardware kit.
Installation components required for fitment.
Important Information
Designed specifically for Dometic PerfectWall awning applications.
Please verify awning and rack compatibility before purchase.
Professional installation is recommended if you are unfamiliar with awning mounting systems.
FRONT RUNNER Double Jerry Can Holder - JCHO014
$195.30
$217.00
Front Runner Jerry Can Holder for Roof Racks
Transport fuel safely and securely with the Front Runner Jerry Can Holder. Engineered for rugged off-road use, this heavy-duty mounting solution is designed to securely hold 20L NATO/Wedco-style military jerry cans while mounted to your Front Runner Roof Rack.
Featuring an adjustable latch with an integrated safety catch, this holder keeps your jerry cans firmly secured even in the harshest terrain. The retention strap covers the jerry can caps for added security and can be paired with a cable lock or RRAC134 lock to help protect your fuel from theft while travelling.
Constructed from black powder-coated high-strength steel, the holder is built for long-term durability and corrosion resistance. Its design allows for easy installation directly onto Front Runner Roof Racks using the flat slotted rack slats, creating a secure and convenient fuel-carrying solution for touring, camping, and overland adventures.
Key Features
Designed to securely hold 20L NATO/Wedco-style military jerry cans.
Adjustable latch with integrated safety catch for secure retention.
Strap design covers jerry can caps for enhanced security.
Compatible with cable locks or RRAC134 lock for theft deterrence.
Mounts directly to Front Runner Roof Racks using flat slotted rack slats.
Constructed from black powder-coated high-strength steel.
Built to withstand demanding off-road and touring conditions.
Corrosion-resistant finish for long-lasting performance.
Benefits
Keeps fuel containers secure during rough off-road travel.
Minimises movement, rattling, and wear on jerry cans.
Provides an organised and accessible fuel storage solution.
Offers additional security against fuel theft when used with a lock.
Compatibility
Suitable for 20L NATO/Wedco-style military jerry cans.
Designed for installation on Front Runner Roof Racks.
Compatible with cable locks and RRAC134 lock.
Not suitable for Scepter-style fuel containers.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Corrosion-resistant and built for long-term outdoor use.
Important Information
Jerry can and lock sold separately.
Ensure the holder is installed according to manufacturer guidelines.
Always check local regulations regarding fuel transport and storage.
FRONT RUNNER Double Jerry Can Holder Replacement Strap - JCHO015
$106.20
$118.00
Front Runner Replacement Top Strap for Jerry Can Holder
Restore the security and functionality of your Front Runner Jerry Can Holder with this replacement top strap. Designed specifically as a replacement for the JCHO014 Jerry Can Holder, this heavy-duty strap securely fastens your jerry cans in place, helping eliminate rattling, movement, and wear during both on-road and off-road travel.
Constructed from black powder-coated stainless steel, the strap is built to withstand harsh environments while providing long-lasting corrosion resistance. The integrated stainless steel cross brace and safety catch ensure your fuel containers remain firmly secured, while the strap design covers the jerry can caps for added security.
Key Features
Replacement top strap designed for the Front Runner JCHO014 Jerry Can Holder.
Securely fastens jerry cans to minimise movement and vibration.
Helps eliminate rattling and wear during travel.
Features a durable stainless steel cross brace.
Integrated safety catch for enhanced security.
Strap covers the jerry can caps for additional protection.
Compatible with padlocks for theft deterrence.
Manufactured from black powder-coated stainless steel.
Benefits
Provides a secure, no-rattle mounting solution.
Helps protect jerry cans from damage caused by movement.
Offers added security when used with a compatible padlock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Designed specifically as a replacement for the Front Runner JCHO014 Jerry Can Holder.
Compatible with optional padlocks, including RRAC134.
Important Information
This product includes the replacement top strap only.
Jerry can holder, jerry cans, and padlock are sold separately.
Ensure proper installation before use.
Construction
Material: Black powder-coated stainless steel.
Corrosion-resistant finish for long-term durability.
Designed for rugged touring and off-road applications.
FRONT RUNNER Expander Camping Chair - CHAI007
$115.20
$128.00
The Expander Camping Chair is praised for its high-quality materials, excellent design, and compact size, making it a durable and comfortable option for camping. Customers appreciate its easy folding and fast shipping, along with its classy appearance and minimal space requirements.
FRONT RUNNER Expedition Rail Kit - Sides - For 1560Mm...
$172.80
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 8 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 8 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular side rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminumProduct Dimensions:1440mm (56.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.56kg (5.6lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 1762Mm...
$172.80
$192.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 9 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 9 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1642mm (64.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.9kg (6.4lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 1964Mm...
$178.20
$198.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 10 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 10 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:6x Tubular rails2x Cast LH drop downs2x Cast RH drop downs4x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1844mm (72.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.1kg (6.8lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 752Mm...
$159.30
$177.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 4-7 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit works with 7 Slat-long Front Runner Slimline II Roof Racks. If you would like to fit this kit to a rack with slats ranging from 4-6 slats, some cutting of the side rail tubing may be necessary, see the fitting instructions for further details.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:4x Tubular rails2x Cast LH drop downs2x Cast RH drop downs2x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:1236mm (48.7") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:2.14kg (4.7lbs)
FRONT RUNNER Expedition Rails - Middle Kit - KRXX001
$181.80
$202.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with rails. This kit includes all hardware and components needed to convert 2 Front Runner Expedition Rail Front or Rear Kits into a Full Perimeter rail kit.
The Front Runner Expedition Rail - Middle Kit allows easy conversion to a full perimeter, safari style, basket shaped roof rack. Designed as an upgrade for owners of 2 Front Runner Expedition Rail - Front or Rear kits.•Install in minutes.•No drilling required.•Adds extra cargo support.•Attractive, low profile design.•Mounting hardware included.•Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.•Manufactured in corrosion resistant high density aluminum components.The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent.PLEASE NOTE: the Front Runner Expedition Rail - Middle Kit only works in conjunction with 2 Front Runner Expedition Rail - Front or Rear Kits and is used to create a Full Perimeter rail.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1x RRAC070 - Expedition Tubing Mid Section (700mm)3x RRAC073 - Expedition Rail Joiner PairMaterials used:Powder coated Aluminium die cast jointsPowder coated 304 Stainless Steel tubingWeight:2,8kg (6lbs)
FRONT RUNNER Extended Hi-Lift Jack Adaptor - 350Mm - JADA003
$107.10
$119.00
Front Runner Extended Hi-Lift Jack Adaptor 350mm
The Front Runner Extended Hi-Lift Jack Adaptor (350mm) is designed to provide a safer and more effective lifting solution for vehicles equipped with raised suspensions, aftermarket bumpers, recovery points, and roof rack-mounted accessories. By extending the reach of your Hi-Lift jack, this adaptor allows lifting from suitable mounting points without risking damage to your vehicle's bodywork or accessories.
Manufactured from precision-engineered heavy-duty steel, the adaptor is built to handle demanding recovery situations and challenging off-road conditions. Its corrosion-resistant finish provides long-term durability, ensuring reliable performance wherever your adventures take you.
Ideal for vehicle recovery, maintenance, tyre changes, and off-road adjustments, the Front Runner Extended Hi-Lift Jack Adaptor delivers the extra reach and stability required when lifting higher-clearance vehicles.
Key Features
350mm extended reach for lifted and high-clearance vehicles.
Designed for use with standard Hi-Lift jacks.
Provides safe lifting from suitable recovery and mounting points.
Heavy-duty steel construction for superior strength.
Precision-engineered for secure and reliable operation.
Corrosion-resistant finish for long-lasting durability.
Compatible with Front Runner recovery gear and accessories.
Ideal for off-road recovery, maintenance, and vehicle servicing.
Benefits
Improves lifting accessibility on modified vehicles.
Helps prevent damage to body panels and vehicle accessories.
Provides increased safety and stability during lifting operations.
Enhances the versatility of your Hi-Lift jack.
Built to perform in demanding off-road environments.
Construction
Material: Heavy-duty precision-engineered steel.
Finish: Corrosion-resistant protective coating.
Designed for rugged off-road and recovery applications.
Compatibility
Compatible with standard Hi-Lift jacks.
Suitable for lifted vehicles and vehicles with increased ground clearance.
Designed for use with Front Runner recovery equipment and accessories.
Ideal Applications
Off-road vehicle recovery.
Suspension and tyre maintenance.
Touring and overlanding vehicles.
Vehicles fitted with aftermarket bumpers and recovery points.
Important Information
Always follow Hi-Lift jack manufacturer safety guidelines.
Ensure the adaptor is correctly installed before use.
Inspect equipment before each recovery or lifting operation.
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack 40In Light Bar...
$152.10
$169.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for .
Allows fitment of 40" Front Runner light bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black Powder Coated Steel
Product Dimensions:1150mm (45.3") L x 160mm (6.3") W x 121mm (4.8") H
Weight:2.36kg (5.2lbs)
FRONT RUNNER Ford Ranger (2012-2022) Slimsport Rack Wind Fairing -...
$152.10
$169.00
Smooth out your ride in Ford Ranger in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford Ranger .
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Ford Ranger Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1150mm (45.3") L x 161mm (6.3") W x 131mm (5.2") H
Weight:2.92kg (6.4lbs)
FRONT RUNNER Hi-Lift Jack Base Plate - JADA004
$112.50
$125.00
Front Runner Hi-Lift Jack Base Plate - JADA004
Improve the safety and stability of your vehicle recoveries with the Front Runner Hi-Lift Jack Base Plate. Designed to provide a solid foundation for your Hi-Lift jack, this essential recovery accessory helps prevent the jack from sinking into soft ground such as sand, mud, gravel, and other unstable surfaces.
Constructed from durable high-density polyethylene (HDPE), the base plate offers exceptional strength while remaining lightweight and easy to carry. Its textured surface enhances grip between the jack and the plate, helping to maintain stability and reduce movement during lifting operations.
Compact and easy to store in your vehicle, the Hi-Lift Jack Base Plate is an essential addition to any recovery kit, providing increased confidence and safety when tackling challenging off-road terrain.
Key Features
Provides a stable foundation for Hi-Lift jacks on soft or uneven terrain.
Helps prevent the jack from sinking into sand, mud, gravel, and loose surfaces.
Manufactured from durable high-density polyethylene (HDPE).
Textured surface improves grip and stability during lifting.
Lightweight design for easy transport and handling.
Compact size allows convenient storage in your vehicle.
Resistant to cracking, warping, and harsh outdoor conditions.
Ideal for off-road recovery and remote area travel.
Benefits
Improves safety when using a Hi-Lift jack on unstable ground.
Distributes weight over a larger surface area to reduce sinking.
Enhances lifting stability and confidence during vehicle recovery.
Provides reliable performance in a variety of off-road environments.
Easy to carry and store without taking up significant space.
Construction
Material: High-density polyethylene (HDPE).
Strong, lightweight, and weather-resistant.
Designed to withstand demanding off-road conditions.
Ideal Applications
4WD and off-road vehicle recovery.
Sand, mud, gravel, and uneven terrain.
Touring, overlanding, camping, and remote area travel.
Important Information
Designed for use with Hi-Lift jacks.
Always follow the jack manufacturer's safety guidelines during use.
Inspect the base plate regularly for damage before use.
FRONT RUNNER Hi-Lift Jack Bracket - JADA010
$184.50
$205.00
Front Runner Hi-Lift Jack Side Mount Brackets for Slimline II Roof Racks
Keep your recovery gear secure and easily accessible with the Front Runner Hi-Lift Jack Side Mount Brackets. Designed specifically for the Front Runner Slimline II Roof Rack, these heavy-duty brackets allow you to mount a Hi-Lift Jack neatly along the side rails of your rack, maximizing cargo space while keeping essential recovery equipment within reach.
Constructed from heavy-gauge steel and finished with Front Runner's durable weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of off-road use. The two-piece design securely holds both the jack base and handle, helping prevent movement and rattling during travel.
For added security, the handle bracket is lockable using a small wire lock such as the Master Lock Luggage Lock Model 4688D, helping protect your Hi-Lift Jack from theft while parked or travelling.
Key Features
Designed for mounting Hi-Lift Jacks to the side rails of Front Runner Slimline II Roof Racks.
Fits all Hi-Lift Jack sizes.
Heavy-gauge steel construction for maximum strength and durability.
Weather-resistant black powder-coated finish.
Two-piece bracket system secures both the jack handle and base.
Lockable design for added security.
Helps prevent movement, rattling, and wear during travel.
Easy bolt-on installation.
Benefits
Keeps your Hi-Lift Jack secure and readily accessible.
Frees up valuable cargo space inside your vehicle.
Provides a clean and organised roof rack setup.
Offers additional theft protection when used with a compatible lock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Compatible with Front Runner Slimline II Roof Racks.
Works with small wire locks such as the Master Lock Luggage Lock Model 4688D.
Not compatible with the Front Runner Slimsport Rack Kit range.
Construction
Material: Heavy-gauge steel.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Important Information
Hi-Lift Jack and lock sold separately.
Designed specifically for Front Runner Slimline II Roof Rack systems.
Not compatible with Front Runner Slimsport Rack Kits.
FRONT RUNNER Hi-Lift Jack Bracket / Top Mount - JADA014
$163.80
$182.00
Front Runner Hi-Lift Jack Roof Rack Mount Brackets
Securely mount your Hi-Lift Jack to your Front Runner Roof Rack with these purpose-built Hi-Lift Jack Mount Brackets. Designed to bolt directly into the T-slots of Front Runner rack systems, these brackets provide a strong, reliable, and easily accessible storage solution for your recovery jack.
The two-piece bracket system accommodates all sizes of Hi-Lift Jacks and keeps them securely mounted during both on-road and off-road travel. The innovative handle bracket opens for quick access when needed, while the lockable design provides added security when paired with the optional RRAC134 lock.
Manufactured from durable steel and finished with Front Runner's weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of adventure.
Key Features
Designed to mount Hi-Lift Jacks directly to Front Runner Roof Racks.
Bolts securely into the rack's T-slot system.
Compatible with all Hi-Lift Jack sizes.
Two-piece bracket design for secure retention.
Opening handle bracket allows easy access to the jack.
Lockable handle bracket for added security.
Compatible with the Front Runner RRAC134 lock.
Durable steel construction with black powder-coated finish.
Benefits
Keeps your Hi-Lift Jack securely mounted and readily accessible.
Maximises storage space on your vehicle.
Reduces movement and vibration during travel.
Provides added theft protection when used with a compatible lock.
Built to withstand harsh off-road and weather conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Designed for Front Runner Roof Rack systems with T-slot channels.
Compatible with RRAC134 lock for additional security.
Construction
Material: Steel.
Finish: Black powder-coated.
Weather-resistant and corrosion-resistant construction.
Important Information
Hi-Lift Jack sold separately.
RRAC134 lock sold separately.
Ensure all mounting hardware is properly tightened before use.
FRONT RUNNER Hose Kit For Tap Extension Bracket - WTAN054
$122.40
$136.00
Front Runner Hose Kit for Tap Extension Bracket - WTAN054
Improve the accessibility of your water system with the Front Runner Hose Kit for Tap Extension Bracket. Designed to extend the reach of your Front Runner water tank tap, this kit provides a convenient solution for installations where the tank is mounted in hard-to-reach locations such as roof racks, canopies, or vehicle storage systems.
Featuring durable food-grade hoses and secure fittings, the kit creates a reliable connection between your water tank and tap extension bracket while maintaining safe, clean water delivery. The leak-resistant design ensures dependable performance, making everyday tasks such as filling bottles, washing hands, and cleaning equipment more convenient at camp or on the road.
Easy to install and built for outdoor use, this hose kit is an ideal addition for overlanders, campers, tourers, and adventure travellers looking to optimise their water setup.
Key Features
Designed for use with Front Runner Tap Extension Brackets.
Extends tap reach for improved accessibility and convenience.
Includes durable food-grade hoses for safe water delivery.
Supplied with secure fittings for reliable installation.
Leak-resistant design helps maintain consistent water flow.
Compatible with Front Runner Pro Water Tanks and tap systems.
Quick and easy installation.
No special tools required for fitting.
Benefits
Makes accessing water easier when tanks are mounted in difficult locations.
Provides a cleaner and more convenient water dispensing solution.
Supports safe drinking water applications with food-grade materials.
Reduces strain and inconvenience when using vehicle-mounted water tanks.
Ideal for camping, touring, overlanding, and outdoor recreation.
Compatibility
Compatible with Front Runner Tap Extension Brackets.
Suitable for Front Runner Pro Water Tanks.
Works with Front Runner tap systems and accessories.
What's Included
Food-grade hose assembly.
Required fittings and connectors.
Components for connecting the water tank to a tap extension bracket.
Important Information
Designed for Front Runner water tank systems.
Please verify compatibility with your existing setup before purchase.
Inspect hoses and fittings regularly to ensure optimal performance.
FRONT RUNNER Kayak Cradle - RRAC254
$181.80
$202.00
Designed to carry a variety of hull shapes as well as SUPs.
Each bracket has an independent pivoting saddle with an angle-setting lever.
The flexible cushioned pads protect the hull.
Large contact surface area for extra stability when transporting your kayaks.
Includes 2 x Tie Down Straps with protective buckle bumpers.
Installation hardware supplied.
Accommodates kayaks and SUPs up to 900mm/35.4" wide and 40kg/88.2 lbs.
Features
Consists of:
2 x Front Cradle Rests
2 x Rear Cradle Rests
2 x Straps
Installation Hardware
Fitting Instructions
Product Dimensions:
200mm (7.9") L x 100mm (3.9") W x 200mm (7.9") H
Weight:
3.1kg (6.8lbs)
Load Rating:
40kg (88.2lbs)
FRONT RUNNER Land Rover Defender (1983-2016) Head Light Protectors -...
$112.50
$125.00
Keep your vehicle's headlights protected from damage with these tough, plastic coated, headlight protectors.
Made out of high strength steel.
Polyethylene plastic coated for protection against the elements.
Mounts to existing mounting points on your Land Rover Defender and uses the original nuts and bolts.
Designed specifically for your Land Rover Defender.
FRONT RUNNER Land Rover Defender (1983-2016) Rear Bumper Bracket For...
$125.10
$139.00
Front Runner Hi-Lift Jack Rear Bumper Mount for Land Rover Defender
Carry your Hi-Lift Jack securely without the need for a roof rack using the Front Runner Hi-Lift Jack Rear Bumper Mount. Specifically designed for the Land Rover Defender, this rugged mounting solution allows you to store your jack conveniently on the rear bumper for quick access when recovery situations arise.
Constructed from black powder-coated high-strength steel, this durable two-piece bracket is engineered to withstand harsh weather conditions, rough tracks, and demanding off-road use. The rear bumper mounting position provides easy access to your Hi-Lift Jack without the need to climb onto your vehicle, making recovery equipment more accessible when you need it most.
In addition to its practical functionality, this bumper mount adds a distinctive off-road appearance to your Defender, enhancing both style and capability.
Key Features
Designed specifically for Land Rover Defender vehicles.
Securely mounts a 1.2m Hi-Lift Jack to the rear bumper.
Heavy-duty two-piece mounting bracket design.
Manufactured from high-strength steel.
Black powder-coated finish for corrosion resistance.
Lockable design for added security.
Provides quick and easy access to your recovery jack.
Enhances the rugged appearance of your Defender.
Benefits
Eliminates the need for roof rack-mounted jack storage.
Keeps recovery equipment easily accessible.
Protects your jack during off-road travel.
Offers a secure and convenient mounting solution.
Adds a functional off-road aesthetic to your vehicle.
Compatibility
Suitable for Land Rover Defender models.
Designed to carry one 1.2m Hi-Lift Jack.
Compatible with user-supplied padlocks for added security.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Built for long-term durability and outdoor use.
Important Information
Hi-Lift Jack sold separately.
Padlock not included.
Professional installation is recommended if you are unfamiliar with vehicle accessory fitting.
FRONT RUNNER Land Rover Defender 110 (1983-2016) Sill Protector /...
$197.10
$219.00
Front Runner Land Rover Defender 110 Sill Protector Black - BPLD003
Protect your vehicle's door sills from everyday wear and off-road damage with the Front Runner Sill Protector for the Land Rover Defender 110. Designed specifically for Defender 110 models, these durable aluminium tread plates provide an extra layer of protection against scratches, dents, scuffs, and impacts.
Manufactured from 1.6mm thick aluminium and finished in a tough black powder coating, the sill protectors are built to withstand harsh conditions while complementing the rugged appearance of your Defender. Whether you're frequently entering and exiting the vehicle, loading equipment, or tackling challenging terrain, these protectors help preserve your vehicle's bodywork and maintain its appearance.
Key Features
Designed specifically for Land Rover Defender 110 models (1983–2016).
Provides added protection for vehicle door sills and corners.
Manufactured from durable 1.6mm thick aluminium tread plate.
Black powder-coated finish for enhanced durability and corrosion resistance.
Helps prevent dents, scratches, scuffs, and impact damage.
Enhances the rugged appearance of the vehicle.
Built to withstand demanding off-road and touring conditions.
Benefits
Protects vulnerable sill areas from everyday wear and tear.
Reduces the risk of costly bodywork repairs.
Maintains the appearance and value of your vehicle.
Provides long-lasting protection in harsh environments.
Complements the Defender's rugged styling.
Construction
Material: 1.6mm thick aluminium tread plate.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Compatibility
Suitable for Land Rover Defender 110 models (1983–2016).
Engineered for a precise vehicle-specific fit.
Important Information
Designed specifically for Defender 110 models.
Please verify vehicle compatibility before purchase.
Professional installation is recommended if required.
FRONT RUNNER Land Rover Defender Tdi/Td5 (1983-2006) Gullwing Box Shelf...
$143.10
$159.00
A shelf that fits into the Front Runner Gullwing Box for the Land Rover Defender TDI/TD5.Use these shelves to create different sections in the Gullwing Box for storing goods, crockery and supplies.Consists of:
1x Wooden shelf1x Mild steel frame1x Fastening KitMaterial used:
Shelf: Stained PlywoodFrame: Black powder-coated mild steelProduct dimensions:
L 209mm (8.2") x W 997mm (39.3") x h 36mm (1.4")Weight:3.8kg (8.4lbs)
FRONT RUNNER Land Rover Discovery Lr3/Lr4 Wind Fairing - RRAC102
$179.10
$199.00
Moves air up and over the rack and accessories, reducing drag and wind noise created by the flow of air over your rack.
Improves fuel consumption.
Securely mounts to Slimline II rack and extends to the Discovery LR3/LR4's roof.
An additional rubber blade is fitted to the bottom edge of the Wind Fairing to seal any gaps and act as a roof guard when traveling over rough terrain.
A clear protective strip for the roof is included that stops any scuffing caused by dust.
Features
Consists of:
1 x Wind Fairing
1 x Rubber Blade
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
157mm (6.2") L x 1174mm (46.2") W x 174mm (6.9") H
Weight:
1.4kg (3.1lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
