Front Runner
FRONT RUNNER Quick Release Dometic Fridge Strap - STRA069
$38.00
$42.00
Make sure your fridge (or other gear) stays where you want it to with this easy-to-use Quick Release Fridge Strap. This is a quick way to safely secure your fridge to a fridge slide, on top of a drawer system or to a load bed slide. This strap system will give you peace of mind when off-roading.
A Strap to secure your Dometic fridges (and other makes) to the Front Runner fridge slides
Perfect for securing Fridges to Front Runner Drawer systems, Fridge sliders and Load Bed Cargo Slides.
Adjustable to secure a variety of fridges with a maximum usage length of 250mm (9.8").
For added peace of mind, use Rack Accessory Lock / Small to lock your Quick Release Fridge Strap.
Consists of:2 x StrapsInstallation HardwareFitment Guide
Materials used:Black powder-coated high strength steelMild Steel and Poly_Web
Product Dimensions:160mm (6.3") L x 36mm (1.4") W x 30mm (1.2") H
Weight:0.27kg (0.6lbs)
Front Runner
FRONT RUNNER Quick Release Tent Mount Kit / 4 Piece - TBMK020
$185.40
$206.00
Once these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent.
Simply release the tabs on the 4 latches and lift the tent away in seconds.
No more wrenching in tight spaces during the off-season or time-consuming weekday removal of a roof top tent.
This strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks.
Compatible with the Roof Top Tent and other popular soft shell tent brands like TJM, ARB, Tepui, etc*.
Compatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below.
4 low profile base brackets are bolted to a Front Runner Rack while 4 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set.
Secures in place with 4 latches with safety catches. Can be locked using Rack Accessory Lock / Small combination cable lock.
Certain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack.
The brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available.
No tent modification is required.
Removed tents can be stored on the ground, raised slightly off the floor by the supplied steel bushes.
Supplied with all required mounting hardware.
Fitting instructions are included.
James Baroud Quick Release Tent Channel Set / 4 Piece or Autohome Quick Release Tent Channel Set / 4 Piece may be required for other tent brands (sold separately).
*Soft shell and hard shell tents may need additional Nut Plates, sold separately.
**IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use Hard Shell Tent Support Channels. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent.
Note: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.
Features
Consists of:
4 x Quick Release Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
304 Stainless steel
Product Dimensions: (Per assembled bracket)
131mm (5.2") L x 142mm (5.6") W x 60mm (2.4") H
Weight:
6.6kg (14.6lbs)
Front Runner
FRONT RUNNER Rack Accessory Lock / Large - RRAC135
$27.00
$30.00
Features a 5-digit combination panel, no keys needed.
The 1.2m length enables you to secure your bicycle to your roof rack when using Pro Fork Mount Bike Carrier / Power Edition and Thru Axle Adapter for Fork Mount Bike Carrier or other rack accessories*.
Robust 12mm stainless steel cable ensures nothing will compromise the safety of your gear.
*Note: Pro Fork Mount Bike Carrier / Power Edition and Thru Axle Adapter for Fork Mount Bike Carrier or other rack accessories are sold separately.
Combination Setup:
Set the code to 00000.
Open the lock.
On the inside you will see a dial which has 'set and an arrow pointing clockwise' engraved.
Turn the dial clockwise (about 1/4 turn).
Set your personal number code.
Turn the dial anti-clockwise (about 1/4 turn).
Done, your new code is now active.
Features
Consists of:
1 x 5-Digit Combination Cable Lock
Materials used:
Cable: Stainless Steel Wire covered in PVC (polyvinyl carbonate)
Lock Case: ABS (Acrylonitrile Butadiene Styrene) Thermoplastic
Lock shank: Stainless Steel
Product Dimensions:
1200mm (47.2") L x 12mm (0.5") Diameter
Coiled Dimensions:
145mm (5.7") L x 138mm (5.4") W x 45mm H (1.8")
Weight:
325g (11.5 oz)
Front Runner
FRONT RUNNER Rack Accessory Lock / Small - RRAC134
$18.90
$21.00
No keys needed.
Easily set your own combo.
Locks Front Runner Rack accessories for holding gear like Tables, Water Tanks, Hi-Lift Jacks, Axes, Wolf Packs and more.
Works with Hi-Lift Jack Bracket, Universal Water Tank Tap, Axe Bracket, Cub Pack Rack Bracket, Wolf Pack Rack Bracket, Lockable Strap For Water Cap / 42L.
Stainless steel rubber coated cable and corrosion resistant tumbler for years of worry-free security.
*Note: Rack accessories are sold separately.
Features
Consists of:
1 x 3-Digit Combination Cable Lock
Materials used:
Casing: Zinc Alloy
Inner Core: Zinc Alloy
Cable: Stainless steel wire with PVC coating
Product Dimensions:
87mm (3.4") L x 30mm (1.2") W x 39mm (1.5") H
Cable Length:
100mm (3.9")
Cable Width:
2.8mm (0.1")
Weight:
30g (17oz)
Front Runner
FRONT RUNNER Rack Adaptor Plates For Thule Slotted Load Bars - RRAC017
$107.10
$119.00
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
Steel.
Black powder coated.
Mounts onto individual slats via the T-slot system.
T-slot bolts included.
Pre-cut fitment holes.
Features
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") high strength steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 290mm (11.42") x W 74mm (2.91") x H 27mm (1.06")
Weight:
2kg (4.4lbs)
Front Runner
FRONT RUNNER Rack Care Spray / Small - RRAC185
$8.10
$9.00
Application:
1) Clean rack thoroughly of any dirt, dust or debris.
2) Apply a generous amount to a clean micro fiber cloth and rub components. Avoid spraying vehicle.
3) Wipe any excess away with a clean micro fiber cloth.
4) Re-apply after washing to extend the life of your rack and accessories.
Features
Consists of:
1 x Bottle of Rack Care Spay (50ml)
Application Instructions
Materials used:
Black Plastic
Product Dimensions:
107mm (4.2") H x 35mm (1.4") Diameter
Weight:
0.2Kg (0.4lbs)
Front Runner
FRONT RUNNER Rack Handle Bracket - RRAC215
$44.10
$49.00
A Handle Bracket for the Front Runner Slimline II rack.
Eases access to the gear on your rack.
Made from black powder-coated steel.
Can be mounted on any side of the Slimline II rack.
Includes installation hardware and fitment guide.
For additional illumination, incorporate a LED Rock Light / 4.5W, recommended with Roof Rack Power Point (sold separately).
Features
Consists of:
1 x Slimline II Rack Handle Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
252mm (9.9") L x 86mm (3.4") W x 55mm (2.2") H
Weight:
660g (23.3oz)
Front Runner
FRONT RUNNER Rack Handle Bracket For Slimsport Rack - RRAC216
$44.10
$49.00
A Handle Bracket for the Front Runner Slimsport rack.
Eases access to the gear on your rack.
Made from black powder-coated steel.
Can be mounted on the left or right sides of the Slimsport rack.
Includes installation hardware and fitment guide.
For additional illumination, incorporate a LED Rock Light / 4.5W, recommended with Roof Rack Power Point (sold separately).
Features
Consists of:
1 x Slimsport Rack Handle Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
260mm (10.2") L x 94mm (3.7") W x 60mm (2.4") H
Weight:
670g (23.6oz)
Front Runner
FRONT RUNNER Rack Mount Shower Arm - RRAC028
$86.40
$96.00
The Shower Arm unhooks easily from the base and folds in half, compact, to be stored under a car seat or inside a Front Runner Wolf Pack, etc.
Mounts anywhere off the side of a Front Runner Roof Rack.
Please Note: This product is not compatible with Slimsport rack kit range.
Features
Materials used:
2.5mm (0.098") black powder coated stainless steel
Lightweight and can carry up to 20l (5.28 gallons) of water suspended from the roof rack
Consists of:
Lower shower arm, upper shower arm and a nuts and bolts kit
Product Dimensions:
L 530mm (20.86") x W 120mm (4.72") x H 90mm (3.54")
Weight:
2kg (4.4lbs)
Maximum Load Capacity:
25kg (55.1lbs)
Front Runner
FRONT RUNNER Rack Mounted Bottle Opener - RRAC210
$11.25
$12.50
Fit a bottle opener to your rack for whenever you need to crack open a cool one.
Black powder coated stainless steel for protection against the elements.
Can be installed on the left or right side of the Front Runner Slimsport Rack by sliding the opener into any slat and fastening the bolt.
Can be installed anywhere along the sides of the Front Runner Slimline II Roof Rack Tray by sliding the opener into the T-slot and fastening the bolt.
Features
Consists of:
1 x Bottle Opener
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
60mm (2.4") L x 45mm (1.8") W x 40mm (1.6") H
Weight:
91g (3.2oz)
Front Runner
FRONT RUNNER Rack Pad Set - RRAC125
$85.50
$95.00
Dont risk your expensive and fragile cargo on unpadded bars. Protect against dings and scratches so you can adventure worry free.
Quickly attach or remove the pads with the heavy-duty Velcro closure system.
Pads secure around any standard Rack Slat or Load Bar.
For use at the front or rear on the Combined Slat of a Front Runner Rack, secure the pads using Black Tie Down Rings / Eye Nuts - SOLD SEPARATELY.
Use Stratchits or other tie down straps to quickly and easily tie-down your gear. Stratchits are SOLD SEPARATELY.
Firm foam for long-lasting reliability.
Wide 24 inch / 61 cm pads for a range of uses and extra protection.
Made with water resistant and durable outdoor grade fabrics.
Set of 2 comes with nylon mesh bag for neat organization when not in use.
Can adjust to fit many other factory racks and load bars.
Note: This product is not compatible with Slimsport rack kit range.
Features
Consists of:
2 x Rack pads
1 x Carry bag
Materials used:
Black canvas - outer shell & lining
EPE (Expandable Polyethylene) foam pads
Mesh - bag
Product Dimensions:
610mm (24") L x 90mm (3.5") W x 75mm (3") H (Single Pad)
Weight:
400g (14.1oz)
Front Runner
FRONT RUNNER Ratcheting Spade/Shovel And Paddle Mount - RRAC024
$85.50
$95.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1560mm long x 1255mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXD003 - Expedition Rail Kit - Front or Back - for 1255mm(W1x KRXS008 - Expedition Rail Kit - Sides - for 1560mm (L) Rack
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1560mm (61.4") L x 1255mm (49.4") W x 63mm (2.5") H
Weight:4.76 kg (10.5 lbs)
Front Runner
FRONT RUNNER Rivnut Tool / M6/M8 - VACC016
$29.70
$33.00
Use this tool to insert M6 and M8 rivnuts.
Front Runner
FRONT RUNNER Roof Rack Power Point - RRAC165
$61.20
$68.00
This power point bolts underneath any slat in the front, on the side, or at the rear of your Roof Rack.
Powered by Hella Extension Cord - 3m/10' power cord from your vehicles 12V accessory outlet.
Made from steel and sealed with the same durable, weather rated powder coating as the Front Runner Roof Racks.
Power additional lights such as, 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam.
Comes with power inlet and outlet to power light and additional 12V accessories simultaneously.
*Note: The Hella Extension Cord - 3m/10' power cord and 4" LED Light Cube MX85-WD / 12V / Wide Beam or 4" LED Light Cube MX85-SP / 12V / Spot Beam are sold separately.
Features
Consists of:
1 x Cover
2 x Female Hella Plugs
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
72mm (2.8") L x 112mm (4.4") W x 50mm (2") H
Weight:
300g (10.6oz)
Front Runner
FRONT RUNNER Roof Rack Spotlight Bracket - RRAC022
$59.40
$66.00
Strong Multi-function brackets, perfect for mounting spotlights or antenna brackets.
Position them anywhere along the T-slots on the front, rear or side of your Slimline II roof rack.
The dual mounting points drastically reduce vibration, extending the life of your mounted electrical accessories.
Can also be mounted upside down, if needed.
Made from stainless steel and features same black powder coating as Front Runner roof racks.
Compatible with the original Slimline Roof Rack, but drilling in to the rack is required.
Sold in pairs.
Features
Consists of:
2 x Adjustable Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated corrosion resistant steel
Product Dimensions:
80mm (3.2") L x 61mm (2.4") W x 66mm (2.6") H (Single Bracket)
Weight:
210g (7.4oz) (Pair)
Front Runner
FRONT RUNNER Roof Top Tent Cover / Black - TENT063 (In Store Pick-Up Only)
$199.80
$222.00
A durable replacement tent cover for the Front Runner Roof Top Tent.
Made from 1000D PVC.
Features
Material used:
1000D PVC
Product Dimensions:
1320mm (52.0") L x 1220mm (48") W x 330mm (13") H
Weight:
3.08kg (6.8lbs)
Color:
Black
Front Runner
FRONT RUNNER Roof Top Tent Cover / Tan - TENT035
$199.80
$222.00
A durable tent cover made from 1000D PVC protects your tent when not in use.
Features
Material used:
1000D PVC
Product Dimensions:
1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H
Weight:
3.08kg (8.4lbs)
Color:
Tan
Front Runner
FRONT RUNNER Rotopax Rack Mounting Plate - RRAC157
$98.10
$109.00
A high strength steel plate to mount either one (1) 15L/4 gallon, one (1) 17L/4.5gallon or two (2) 7.5L/2 gallon RotoPax fuel or water cans.
Secures to the top slats of the Front Runner Rack.
The original RotoPax RX-PM Pack mounts must be used together with the mounting plate to secure the cans (RX-PM sold separately).
Finished in the same durable, weather-resistant black powder coating as the Front Runner Rack.
Features
Consists of:
1 x Mounting Plate
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
480mm (18.9") L x 248mm (9.8") W x 18mm (0.7") H
Weight:
1.9kg (4.2lbs)
Front Runner
FRONT RUNNER Sand Trax Mat - REQU042
$78.00
$87.00
A Sand Trax mat to help with off-road hindrances like sand, mud or sharp rocks.
Consists of:1 x Sand Trax MatMaterials used:Rubber stripsSteel cableProduct Dimensions:1500mm (59.1") L x 220mm W (8.7")Weight:7.64kg (16.8lbs)Special NotesSKU;RTSANDTRAX
Front Runner
FRONT RUNNER Shoe Bag For Roof Top Tent - TENT085
$30.60
$34.00
A 7 (seven) step replacement ladder for your Roof Top Tent incase the original ladder gets damaged or lost.
Retractable, for easy storage.
Made from sturdy aluminium.
Foot friendly steps.
Weight limit: 180kg/400Lbs.
NOTE: Should the tent install height be higher than 2 meters you will need a Tent Extension Ladder.
Features
Materials used:
Extruded aluminium
Stainless steel
Nylon-6
Product Dimensions:
1150mm (45.3") L x 350mm (13.8") W x 90mm (3.5") H
Open Dimensions:
2055mm (80.9") L x 350mm (13.8") W x 90mm (3.5") H
Front Runner
FRONT RUNNER Shower Cubicle Curtain / Caddy - SHOW013
$49.50
$55.00
A privacy curtain and shower caddy to use with the Rack Mount Shower Cubicle.
Easily connects to your Front Runner Rack with two carabiner clips.
The shower caddy has 3 storage compartments.
Stores away inside your Shower Curtain Storage Bag.
Features
Consists of:
1 x Shower Caddy
Installation Hardware
Fitting Instructions
Materials used:
240gsm Ripstop, UV and mold resistant fabric
Product Dimensions:
1000mm (39.4") L x 1200 (47.2") W x 10mm (0.4") D (When hang on vehicle)
Weight:
0.61kg (1.4lbs)
Front Runner
FRONT RUNNER Slat To Load Bar Conversion End Cap Kit - RRAC044
$25.20
$28.00
Convert any size slat to a load bar with these plastic end caps.
Add the finishing-touch to any size Slimline II slat by closing up the load bar's inner cavities, preventing dust and water from gathering inside the slat.
Just pop them on and your slat to load bar "conversion" is complete!
Supplied in sets of (4) four.
Features
Consists of:
4x Load Bar End-caps
Material used:
Plastic - Polypropylene
Product Dimensions:
91mm (3.6") L x 23mm (0.9") W x 20mm (0.8") H
Weight:
80g (2.8oz)
Front Runner
FRONT RUNNER Slimline Ii Universal Accessory Side Mounting Brackets - RRAC031
$51.30
$57.00
Universal brackets that fit onto the Front Runner Slimline II Roof Rack's side profile, allowing you to mount accessories to your roof rack without having to drill into it.
Features
Consists of:
Comes in a set of (3) three brackets with pre-cut mounting holes. Washers, bolts and nuts included.
Materials used:
Black powder coated steel.
Product Dimensions:
L 115mm (4.52") W 90mm (3.54") x H 55mm (2.16")
Weight:
0.66kg (1.455lbs)
Front Runner
FRONT RUNNER Slimpro Van Rack Adjustable Wind Fairing - RRAC329
$173.70
$193.00
Give your van or ride that sought-after rugged and capable look with this width adjustable Wind Fairing. The fairing is also the perfect place to mount a lightbar or spotlights for nighttime adventures.
A Wind Fairing for Slimpro Van Racks.
Secures suitable 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount*, 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount*, Light Pods or Spotlights to your Slimpro Van Racks.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
Provides better airflow by moving air up and over the rack and accessories, reducing drag and wind noise.
Note: Lightbars*, Light Pods and Spotlights are sold separately. 50" LED Light Bar VX1250-CB SR SM / 12V/24V / Single Mount requires a minimum rack width of 1345mm.
Consists of:1x Slimpro Van Rack Adjustable Wind Fairing Installation HardwareFitting InstructionsMaterials used:Black powder-coated high strength steelProduct Dimensions:Closed Dimensions:173mm (6.8") L x 1350mm (53.1") W x 115mm (4.5") HOpen Dimensions:173mm (6.8") L x 1568mm (61.7") W x 115mm (4.5") HWeight:3.22kg (7.1lbs)
Front Runner
FRONT RUNNER Slimsport/Slimpro Van Side Mount Accessory Bracket / Large - RRAC283
$89.10
$99.00
This pair of brackets secures to the slats of your rack to accommodate most Front Runner side mount accessories.
The brackets are adjustable and can be set at any position along the T-slot of the rack slats.
Made from high strength steel and sealed with the same durable, weather resistant black powder-coating as the Front Runner Roof Racks.
Includes installation hardware and fitting instructions.
No drilling is required to attach side accessories.
Features
Consists of:
1 x Side Mount Accessory Bracket
1 x Hardware Kit
1 x Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
222mm (8.7") L x 50mm (2") W x 99mm (3.9") H
Weight:
0.7 kg (1.5lbs)
Front Runner
FRONT RUNNER Slimsport/Slimpro Van Side Mount Accessory Bracket / Small - By - RRAC182
$42.30
$47.00
A pair of brackets that secure to the slats of your Front Runner Slimsport or Slimpro Van Rack.
Mounts Front Runner side mount accessories such as:
Quick Release Awning Mount Kit
Ratcheting Spade/Shovel & Paddle Mount
Installs in the T-slots of the Slimsport or Slimpro Van Rack and can be inversed to allow for standard or lower mount depending on roof clearance.
Made from black powder coated 6063 T6 aluminum to match your rack accessories.
Supplied with installation hardware and fitting instructions.
Note: This product is only compatible with the Front Runner Slimsport and Slimpro Van Rack Kits.
Features
Consists of:
1 x Pair of Rack Accessory Mounting Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated aluminum
Product Dimensions:
101mm (4") L x 60mm (2.4") W x 50mm (2") H (Per Single Bracket)
Weight:
0.37kg (0.8lbs)
Front Runner
FRONT RUNNER Spade/Shovel With Axe Edge - REQU049
$51.00
$57.00
Spade/Shovel with Axe Edge
Product Dimensions:L 760MM x W 210MM x H 60MM
Weight:1.5kGSpecial Notes SKU; FG00556
Front Runner
FRONT RUNNER Spare Bolt Kit For Slimline Ii Tray - RRAC041
$70.20
$78.00
Replacement nuts and bolts for lost or damaged Slimline II components.
Features
Consists of:
32x M8 nyloc nuts
4x M6x16 dome head bolts
28x M8x25 dome head bolts
4x M8x45 dome head bolts
2x Aluminium rack joiners (thin)
2x Aluminium rack joiners (thick)
Front Runner
FRONT RUNNER Spare Tire Mount Braai/Bbq Grate Leg Replacement Kit - VACC031
$45.00
$50.00
This kit Includes all the necessary hardware and assembly instructions.
Features
Consists of:
1 x Aluminum Braai/BBQ Grate Leg
1 x Aluminum Braai/BBQ Grate Leg Spacer
Installation Hardware
Materials used:
Ultra Hi Temperature Coated Aluminum
Steel - Fasteners
Product Dimensions:
363mm (14.3") L x 12mm (0.5") W x 215mm (8.5") H
Weight:
280g (9.9oz)
Front Runner
FRONT RUNNER Spare Wheel Clamp / Low Profile - SWCL004
$76.50
$85.00
This Front Runner Spare Wheel Clamp is designed to hold your spare wheel to a Front Runner Roof Rack or Front Runner Load Bar set.
Mounts across 2 slats and can handle mostly any size wheel.
Specifically mounts a raised dish rim with the hollow side facing up.
Tightens down to the back side of the wheel to protect your wheel finish, and can accommodate even the deepest offsets.
Features
Consists of:
1x Rack Bracket
1x Clamp Bracket
1x Mounting Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
263mm (10.4") L x 55mm (2.2") W x 242mm (9.5") H
Weight:
1.5kg (3.3lbs)
Front Runner
FRONT RUNNER Spare Wheel Inflator - REQU059
$63.00
$70.00
Using your compressor, this nifty hose device will inflate your spare tyre when you've sprung a leak on one of your fitted tyres.
Product Dimensions (mm):250L x 250W x 30H
Weight:0.11kgSpecial Notes
SKU; RR-AC-04
Front Runner
FRONT RUNNER Spare Wheel Step - LADD007
$180.00
$200.00
Convenient means of reaching your roof rack.
Attaches to rear mounted spare wheel using heavy duty black ratchet strap provided.
Allows effortless access to Roof Racks.
Black powder coated high strength steel frame with non-slip tread plates.
Fits wheel sizes from 24" to 35". No drilling, no tools -- just wrap, ratchet tight, and step up.
Can be used to secure the Spare Tire Mount Braai/BBQ Grate to your vehicles spare wheel.
Features
Consists of:
Ladder, top step and bottom step
5m (196.85) endless ratchet strap
Materials used:
Black powder-coated 3mm (0.11") high strength steel
Product Dimensions:
L 450mm (17.71") x W 150mm (5.9") x H 110mm (4.33")
Length of strap: 5m (196.85)
Weight:
3kg (6.6lbs)
Note:
Fits all wheel types between 24"and 35"
Front Runner
FRONT RUNNER Stainless Steel Collapsible Cup Holder - VACC002
$19.80
$22.00
A fold away cup holder, mountable to any flat surface.
Made of stainless steel.
Pre-cut holes for mounting purposes.
Folds out to support bottom and circumference of the cup, bottle or can.
Holder can accomodate items with a maximum diameter of 58.5mm (2.3").
Features
Consists of:
1x Cup holder
6x Pop rivets
Materials used:
Stainless steel
Weight:
0.1kg (0.2lbs)
Holder slot dimension:
Diameter: 58.5mm (2.3")
Front Runner
FRONT RUNNER Stainless Steel Tie Down Rings - RRAC025
$21.60
$24.00
These easy to use tie down rings quickly and easily mount to the t-slots on the top, sides and/or the bottom of Front Runner Racks. Sold in Pairs.
No tools required. Just hand tighten.
Slide these around anywhere on the rack for an endless supply of tie down points.
Perfect for use with the Front Runner Stratchit or any style tie down strap.
Mount unusual loads securely to your Rack for hassle free/rattle free travels where a specific mounting accessory is not available.
Of all the accessories for Front Runner Racks, this is THE must have.
Features
Material used:
Stainless steel
Consists of:
2x Ring nuts
2x Bolts
2x Plastic washers
Weight:
0.12kg (0.26lbs)
Front Runner
FRONT RUNNER Starlink Antenna Rack Mount - RRAC300
$62.10
$69.00
Easily mount your Starlink Flat High Performance system onto your Front Runner Roof Rack by using the strong, steel Starlink Antenna Rack Mount. You can now uninterruptedly use the Starlink service without having to adjust the angle or focus.
A bracket set to install the Starlink Flat High Performance on all Front Runner roof racks.
Allows uninterrupted use of your Starlink Flat HP service while in motion without the need to adjust angle or focus.
Brackets are angled to allow for water shed.
Made of high strength steel and finishined in the same durable black powder-coating as the Front Runner racks.
Instalation hardware and fitment guide included.
NOTE: The screws to secure dish to the brackets are not included, we recommend to use the original screws supplied with your Starlink.
Consists of:2 x Mounting Bracket (1 Left hand & 1 Right hand) Installation HardewareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:453mm (17.8") L x 97mm (3.8") W x 86mm (3.4") H
Weight:1.27Kg (1.3lbs)
Front Runner
FRONT RUNNER Storage Box Foam Dividers - SBOX052
$56.70
$63.00
These Storage Box Foam Dividers are designed to partition and protect your valuables on any adventure.
Designed to be compatible with the Front Runner Wolf Pack Pro or the Cub Pack.
Includes three (3) foam strips so you can create your own configurations.
Includes a craft utility knife and a set of 10 clips.
Features
Consists of:
3 x Foam Dividers
1 x Craft Utility Knife
1 x Set of 10 Plastic Clips
Fitting Instructions
Materials used:
Grey Foam
Plastic
Product Dimensions:
950mm (37.4") L x 178mm (7") W x 12mm (0.5") H (Single Foam Divider)
Weight:
0.57kg (1.3lbs)
Front Runner
FRONT RUNNER Strap Ratchet 25 X 2.5M W/ Hooks - STRA014
$26.10
$29.00
Strap Ratchet 25 X 2.5M W/ Hooks
Front Runner
FRONT RUNNER Stratchit Shorties - STRA037
$43.20
$48.00
Cinch down loads simply and effectively so you don't have to worry about gear rattling loose on bumpy roads.
Stratchit Shorties absorb tension like a stretchy ratchet strap.
Stratchit Shorties are adjustable from 470mm / 18.5" in length to 1017mm / 40" in length.
Quick and efficient. Simply secure the ends and hand tighten the strap.
Fastens to, and around, just about anything.
Perfect for Front Runner Racks and accessories, but work with all roof rack systems.
Many uses! Secure: Wolf Pack Pro, Cub Pack and other cases (Pelican, Zargas, Alu-box, etc.) to any roof rack.
Secure: Surfboards, SUP, bicycles, firewood, chairs, etc.
For extra length Stratchits can be used.
Keep your luggage secure inside the vehicle. Scrunch up your sleeping bags extra tight.
Sold in pairs.
HOW TO USE:
Hook to the Front Runner Roof Rack Tie Down Ring or loop around the slats or side profiles and fasten the Stratchit Shortie to itself.
You can even remove the carabiner and loop the Stratchit Shortie through itself - to fasten around any roof rack rail, railing, pole, bumper, tire carrier.... etc.
WARNINGS:
Please read and follow all these warnings carefully -- failure to do so could result in cargo damage and could cause injury.
Do not over tighten. Use only hand leverage.
Never stand in the direct path of the Stratchit Shortie when tensioning to prevent the risk of injury should the strap become detached.
Loads settle. Check Stratchit Shortie after first 10 miles of driving and each 50 miles thereafter.
User to evaluate working load and requirements. DO NOT use to support human weight under any circumstance.
Check the Stratchit Shortie regularly for signs of deterioration or damage.
To ensure longevity, please remove the Stratchit Shorties from the sun and weather elements when not in use.
Make sure that the points of attachment to the vehicle or trailer are of sufficient strength to withstand the maximum loading that will be produced during use.
Take additional care if securing large objects that may be subject to aerodynamic lifting forces caused by bumps. Always use the appropriate number of straps and drive at reduced speeds to minimize the effects of these forces.
Features
Consists of:
2 x Stratchit Shorties
Materials used:
Polyester webbing
Latex Bungee
7mm Stainless Steel Carabiner
Product Dimensions:
Adjustable from 470mm (18.5") L to 1017mm (40) L x 25mm (1.0") W
Weight:
185g (6.5oz) each
370g (13 oz) per pair
Working Load Rating:
220 lbs (100kg)
Front Runner
FRONT RUNNER Stratchits - STRA034
$48.60
$54.00
Revolutionize the way you secure loads to your vehicle. The Stratchit is the ultimate tie down with stretchy ratcheting performance in a lightweight, durable strap. These new and improved Stratchits feature a Velcro tab for strap discipline and larger stainless steel carabiners. Stratchits have all the benefits of a compact ratchet strap and bungee cord combined. Sold in pairs.
Cinch down loads simply and effectively so you don't have to worry about gear rattling loose on bumpy roads.
Adjustable from 22” (560mm) to 63” (1524mm) and with an additional 8” (203mm) when fully stretched.
Won’t damage your expensive gear like surfboards through over tightening.
Stratchits absorb tension like a stretchy ratchet strap.
Quick and efficient. Simply secure the ends and hand tighten the strap.
Fastens to, and around, just about anything.
Perfect for Front Runner Racks and accessories, but work with all roof rack systems.
Many uses! Secure: Wolf Pack Pro, Cub Pack and other cases (Pelican, Zargas, Alu-box, etc.) to any roof rack.
Secure: Surfboards, SUP, bicycles, firewood, chairs, etc.
For shorter length Stratchit Shorties can be used.
Keep your rack clean and organized with the cinching hook and loop strap that neatly stows away excess strap length.
Sold in pairs.
HOW TO USE:Hook to the Front Runner Roof Rack Black Tie Down Rings / Eye Nuts or Stainless Steel Tie Down Rings or loop around the slats or side profiles and fasten the Stratchit to itself.You can even remove the carabiner and loop the Stratchit through itself - to fasten around any roof rack rail, railing, pole, bumper, tire carrier.... etc.WARNINGS:Please read and follow all these warnings carefully -- failure to do so could result in cargo damage and could cause injury.Do not over tighten. Use only hand leverage.Never stand in the direct path of the Stratchit when tensioning to prevent the risk of injury should the strap become detached.Loads settle. Check Stratchit after first 10 miles of driving and each 50 miles thereafter.User to evaluate working load and requirements. DO NOT use to support human weight under any circumstance.Check the Stratchit regularly for signs of deterioration or damage.To ensure longevity, please remove the Stratchit from the sun and weather elements when not in use.Make sure that the points of attachment to the vehicle or trailer are of sufficient strength to withstand the maximum loading that will be produced during use.Take additional care if securing large objects that may be subject to aerodynamic lifting forces caused by bumps. Always use the appropriate number of straps and drive at reduced speeds to minimize the effects of these forces.
Sold in PAIRSAdjustable from 22" (560mm) to 63" (1524mm) from the hook end of the carabiners. With up to an additional 8” of length when stretched.Working Load Rating 220 lbs (100kg)
Materials used:Polyester webbingLatex Bungee7mm Stainless Steel Carabiner
Weight:230g (8.1oz) each460g (16.2oz) per pair
Front Runner
FRONT RUNNER Subaru Outback Gen 6 (2020-Current) Slimsport Rack 40 Light Bar Wind Fairing - RRAC328
$188.10
$209.00
Get ready to light up the night while reducing drag and noise with this 40” Light Bar Wind Fairing for the Slimsport Rack on your Subaru Outback GEN 6. It also improves fuel consumption when you have bulky items on the rack and its durable rubber beading, found on the bottom edge, gives added protection when going over rough terrain.
Lightbar wind fairing for Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber beading is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Subaru Outback Slimsport Rack Light Bar Wind Fairing1 x Wind Fairing Rubber - 950mm (L)1 x Clear VinylInstallation HardwareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:73mm (2.9") L x 1145mm (45.1") W x 206mm (8.1") H
Weight:2.99Kg (6.6lbs)
Front Runner
FRONT RUNNER Subaru Outback Gen 6 (2020-Current) Slimsport Rack Wind Fairing - RRAC327
$188.10
$209.00
Reduce noise levels and improve the airflow over the Slimsport Roof Rack of your Subaru Outback GEN 6 with this easy-to-fit Wind Fairing. It certainly helps reduce fuel consumption on a loaded rack and its durable rubber beading, found on the bottom edge, gives added protection when going over rough terrain.
A wind fairing for the Subaru Outback GEN 6 (2020-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber beading is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Subaru Outback Slimsport Rack Wind Fairing1 x Wind Fairing Rubber - 950mm (L)1 x Clear VinylInstallation HardwareFitting Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:79mm (3.1") L x 1145mm (45.1") W x 201mm (7.9") H
Weight:3.53Kg (7.8lbs)
Front Runner
FRONT RUNNER Subaru Xv Crosstrek 2Nd Gen (Gt) (2017-2023) Slimsport Rack 40 Light Bar Wind Fairing - RRAC211
$146.70
$163.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for .
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel
Product Dimensions:1140mm (44.9") L x 163.5mm (6.4") W x 116mm (4.6") H
Weight:2.1kg (4.6lbs)
Front Runner
FRONT RUNNER Subaru Xv Crosstrek 2Nd Gen (Gt) (2017-2023) Slimsport Rack Wind Fairing - RRAC235
$146.70
$163.00
Smooth out the ride in your Subaru XV Crosstrek in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Subaru XV Crosstrek 2nd Gen (GT) (2017-2023) Slimsport Rack Wind Fairing1 x Protection StripInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1140mm (44.9") L x 171mm (6.7") W x 129mm (5.1") H
Weight:2.89kg (6.4lbs)
Front Runner
FRONT RUNNER T-Slot Rubber Beading - RRAC013
$17.10
$19.00
Need a little extra insulation between your rack and gear?
The Front Runner T-Slot Rubber Beading slides easily into your Front Runner rack t-slots for extra grip and cushioning. It reduces rattles and is great for storage boxes, firewood, or any other item that you want to insulate from your rack. Comes in 1.5m (5') lengths.
On some vehicles with sun roofs, installing the t-slot beading on the front slats may help lessen wind noise.
Features
Consists of:
1.5m (5') Length of beading
Materials used:
Ethylene propylene diene monomer (M-class) all weather rubber
Weight:
0.1kg (0.3lbs)
Front Runner
FRONT RUNNER Tap Extension Bracket - RRAC170
$112.50
$125.00
Installs to the side profile of your Slimline II Roof Rack.
Swings out 90 degrees from the side of the rack, allowing your water tap to clear the side of your vehicle.
The spring pin locks the extension bracket in a closed or opened position.
Features a shower head holder.
Used best with Hose Kit For Tap Extension Bracket.
Features
Consists of:
1 x Tap Extension Bracket
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
315mm (12.4") L x 187mm (7.4") W x 73mm (2.9") H
Weight:
1.3kg (2.9lbs)
Front Runner
FRONT RUNNER Telescopic Camping Light - LIGH218
$62.10
$69.00
Designed with an LED light panel of 47W, this light can perfectly illuminate a dark area.
Includes a 4.5m/14.7ft extendable rod, so you can install it at any height.
Comes with remote control.
Highly versatile, making it ideal for camping, picnics, outdoor barbecue or for doing late-night mechanical repairs.
Powered by your cars battery, 12V outlet, or a 12V power bank.
Note: This product is not waterproof and is not recommended to be used in wet weather conditions.
Features
Consists of:
1 x Lamp Plate
1 x 4.5m Fishing Rod
1 x Rod Stand
1 x 5M Car Output Wire with Cigarette Lighter
1 x Battery Clips
1 x Remote Controller
1 x Adjustable Bracket
1 x Carry Bag
Product Dimensions:
Carry Bag/Overall Dimensions:
780mm (30.7") L x 80mm (3.2") W x 150mm (5.9") H
LED Dimensions:
228mm (9") L x 113mm (4.4") W
Weight:
1.48kg (3.3lbs)
Special Notes:
Rod Length: 4.5M
Light power: 47w COB
Luminous flux: 4598LM
Input voltage: DC 12V
Front Runner
FRONT RUNNER Telescopic Ladder Support Bracket / Slimsport And Slimpro Van Racks - RRAC206
$52.20
$58.00
A pair of brackets that secures onto the side or rear of the Slimline II Rack, Slimsport Rack and Slimpro Van Rack and allows the Aluminium Telescopic Ladder / 2.9m to rest securely against the rack.
These brackets prevent the ladder from sliding sideways, offering a safe foothold when climbing onto your rack.
These brackets allow for more clearance from the side or rear of your rack which could prove useful on vehicles that require more clearance, such as vans.
Note: These brackets are suitable for all Front Runner Racks, for a more discreet option on the Slimline II, Telescopic Ladder Support Bracket / Slimline II Rack is available.
Features
Consists of:
2 x Ladder Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
316mm (12.5") L x 75mm (3") W x 57mm (2.3") H (per Single Bracket)
Weight:
1.3kg (2.9lbs)
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
