GME Medium Parallel Spring - Black - AS003B
$109.00
The AS003 is a Medium Duty Stainless Steel Antenna Spring.
This Antenna Spring suits the AE4703.
Medium Duty Antenna SpringStainless Steel Finish1 Year Warranty
Key FeaturesMedium Duty Antenna SpringStainless Steel Finish
In the boxSpring Only
GME On Glass Uhf Antenna (2.1Dbi Gain) - AE5002
$175.00
The AE5002 is an Australian Made on-glass antenna, pre-tuned to 477MHz and offering 2.1dBi gain.
It has an inconspicuous under-glass coupling box and is ideal for users in need of an unobtrusive UHF antenna set-up.
The AE5002 is suited to a wide range of vehicles from 4WD and luxury vehicles through to agricultural and earth-moving equipment.
Under-Glass Coupling BoxGround Independent DesignPre-terminated FME Connector2.1dBi Gain210mm Length
Key FeaturesUnder-Glass Coupling BoxGround Independent DesignPre-terminated FME Connector2.1dBi GainLength: 210mmIn the boxAntenna Whip AssemblyUnder-Glass Coupling BoxLead AssemblyMounting Hardware
GME Rapid Desktop Charger - Suit Tx6500S - - BCD013
$145.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The BCD013 is a Rapid Desktop Charger to suit the TX6500S.
Single Desktop Cradle
Rapid Charge Rate
12V DC 1 Amp
1 Year Warranty
Key Features
Single Desktop Cradle
Rapid Charge Rate
12V DC 1 Amp
In the box
Charger Only
GME Transparent On Glass Uhf Antenna (2.1Dbi Gain) - AE5003
$129.00
The AE5003 is an Australian Made transparent on-glass antenna, pre-tuned to 477MHz and offering 2.1dBi gain.
Due to the transparent design of the antenna it is ideal for users in need of an unobtrusive or covert UHF antenna set-up.
As GME’s transparent on-glass antennas are mounted on the inside of the windshield there is no opportunity for theft or vandalism, and no creation of wind noise.
The AE5003 is suited to a wide range of vehicles from 4WD and luxury vehicles through to agricultural and earth-moving equipment.
Key FeaturesCovert On-Glass MountingGround Independent DesignPre-terminated FME Connector2.5dBi Gain265mm (L) x 20mm (W)
In the boxOn-Glass Antenna3m Low Loss Coaxial Cable with FME Termination1m RG174 Cable with FME TerminationMounting Instructions
GME Transparent On Glass Uhf Antenna (4.5Dbi Gain) - AE5004
$175.00
The AE5004 is an Australian Made transparent on-glass antenna, pre-tuned to 477MHz and offering 4.5dBi gain.
Due to the transparent design of the antenna it is ideal for users in need of an unobtrusive or covert UHF antenna set-up.
As GME’s transparent on-glass antennas are mounted on the inside of the windshield there is no opportunity for theft or vandalism, and no creation of wind noise.
The AE5004 is suited to a wide range of vehicles from 4WD and luxury vehicles through to agricultural and earth-moving equipment.
Key FeaturesCovert On-Glass MountingGround Independent DesignPre-terminated FME Connector4.5dBi Gain271mm (L) x 165mm (W)
In the boxOn-Glass Antenna3m Low Loss Coaxial Cable with FME Termination1m RG174 Cable with FME TerminationMounting Instructions
GME Xrs Connect Handheld Uhf Cb Radio - CTA500
$120.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
The CTA is a Crimping Tool to terminate RG58/U with FME Connector.
Crimping Tool to Terminate RG58/U with FME Connector
1 Year Warranty
Key Features
Crimping Tool to Terminate RG58/U with FME Connector
In the box
Crimping Tool
GME Xrs™ Connect Bluetooth Interface Module And Wireless Ptt -...
$199.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
Introducing the all-new XRS™ Connect Bluetooth® Interface Module and Wireless PTT from GME, the XRS-BT1.
The XRS-BT1 is an interface module bringing full Bluetooth® audio connectivity and wireless PTT (Push-to-Talk) functionality to the full range of XRS™ Connect UHF CB Radios.
Bluetooth® audio connectivity allows the XRS-BT1 to wirelessly connect to an extensive range of third-party audio accessories including headphones, hearing aids, and vehicle stereo systems, providing users with new and improved ways to stay connected.
Included in the kit is an adjustable steering wheel clamp which provides a simple mounting solution for the IP67 wireless PTT button and a wired hands-free microphone with a 1.8 metre cable for easy mounting options.
The PTT clamp design provides access to the battery without the need to remove it from the steering wheel, plus, the PTT button can also be removed from the clamp and mounted to an alternative location using the dash mount kit supplied.
Bluetooth® Wireless Technology – Audio and Data
Connect to Compatible Bluetooth® Audio Devices
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
Wired Push-To-Talk Input
3 Year Warranty
Key Features
Bluetooth® Wireless Technology – Audio and Data
Connect to Compatible Bluetooth® Audio Devices
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
Wired Push-To-Talk Input
In the box
Bluetooth® Interface Module
Wireless PTT and Steering Wheel Clamp (XRS-PTT)
Pillar Mount Microphone (MC014)
PTT Dash Mount Kit
2mm Silicone Sleeve
HERTZ 6.5"2 Way Coaxial Speaker 120W - DCX165.3
$142.99
Product info:
2-way car speakers (pair)
6-1/2" treated paper woofer with polyurethane surround
5/8" PEI dome tweeter
handles up to 60 watts RMS (120 watts peak power)
frequency range: 60-21,000 Hz
sensitivity: 93 dB
top-mount depth: 2-1/2"
grilles not included
warranty: 2 years
MFR # DCX 165.3
Item # 301DCX1653
Includes
Two 2-way Speakers
Eight 3/4" Screws
8 Speed clips
Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 20 Others)
Template on box
General
Speaker Size
6 1/2
Driver Design
2-way
Woofer Design
Cone
Woofer Material
Treated Paper (Water-Repellent)
Woofer Surround
Polyurethane
Midrange Design
---
Midrange Material
---
Tweeter Design
15mm Dome
Tweeter Material
PEI
Super Tweeter Design
---
Super Tweeter Material
---
Impedance (Ohms)
4
Weather-resistant
No
Grilles Included
No
Parts Warranty
2 Years
Labor Warranty
2 Years
Specifications
Sensitivity (1W at 1 meter)
93
Sensitivity at 2.83 volts
N/A
Frequency Response
60 - 21k Hz
Maximum RMS Wattage
60
Peak Power Handling (Watts)
120
Top-mount Depth (Inches)
2 9/16
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
5 9/16
Mounting Height (Inches)
0.242
Frame Width
6.48
Frame Length
6.48
HERTZ Cento 26Mm (1") Tweeter - Pair (C26)
$134.99
C 26 tweeter features a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity.
Component
Tweeter
Size mm (in.)
26 (1)
Power Handling - Peak W
120
Power Handling - Peak Note
(Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance Ohm
4
Voice Coil Ø
20(0.8)
Frequency Response Hz
1.8k ÷ 22.5k
Magnet size D x d x h mm (in.)
19 x 0 x 3 (0.75 x 0 x 0.12)
Weight of one speaker kg (lb.)
0,04 (0.08)
Magnet
Neodymium
Dome
Tetolon
D mm
26
Re Ohm
3,7
Fs Hz
1500
Le mH
0,02
Vas I
-
Mms g
0,17
Cms mm/N
0,07
BL T*m
1,3
Qts
1,6
Qes
3,5
Qms
2,9
Spl dB
92
A
44 mm
1.73 in.
B
38,5 mm
1.52 in.
C
20 mm
0.79 in.
D
9,1 mm
0,36 in.
HERTZ Cento 6.5" Woofer Component - Pair (C 165)
$199.99
Much time was invested in the research of the perfect material for the C 165 woofer cones: through a long process of customisation of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions.
Component
Woofer
Size mm (in.)
165 (6.5)
Power Handling - Continuous W
70
Power Handling - Peak W
210
Impedance Ohm
4
Voice Coil Ø
25 (1)
Frequency Response Hz
55 ÷ 7k
Magnet size D x d x h mm (in.)
85 x 32 x 15 (3.35 x 1.26 x 0.59)
Weight of one speaker kg (lb.)
0,96 (2.12)
Magnet
High density flux ferrite
Cone
Semi-pressed paper+ Mica
Xmech mm (in.)
4,9 (0.19)
D mm
131,5
Re Ohm
3,2
Fs Hz
60
Le mH
0,2
Vas I
13,24
Mms g
13,9
Cms mm/N
0,51
BL T*m
4,9
Qts
0,59
Qes
0,69
Qms
3,9
Spl dB
93
A
165 mm
6.5 in.
B
142 mm
5.59 in.
C
71 mm
2.8 in.
D
62,5 mm
2.46 in.
E
171 mm
6.73 in.
F
24 mm
0.94 in.
HERTZ Dcx160.3 2-Way 6" Coaxial Speakers - DCX160.3
$165.00
Dieci 120W 6 Inch 2-Way Coaxial Speakers
Large motor assembly
Pure copper voice coil
Water-repellent treated paper cone
TPU surround
Neodymium tweeter with PEI dome
DIN-size basket protected by abrasion-proof dust paint
Tin-plated, high current terminals
Silver-plated lead wires
Butyl rubber protective cover
Epoxy glue for basket and motor system
Low carbon content plates
Adaptor ring included
DISCLAIMER: Design, features and specifications subject to change without notice. Some features in videos on the Internet may not be available on all models, please contact us for the TECHNICAL SPECIFICATIONS for a complete list of features by model. This feature list is for reference only, please contact us to verify features and functionality.
HERTZ Dieci 10" 600W 4 Ohm Svc Subwoofer (Ds 25.3)
$154.99
Hertz DS 25.3 car audio subwoofers offer high efficiency and exceptional power handling. Equipped with a polypropylene membrane and butyl rubber surround, they provide high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation, increasing their reliability.
Size mm (in.)
250 (10)
Power Handling - Continuous W
150
Power Handling - Peak W
600
Impedance Ohm
4
No Filter Component
Subwoofer
Voice Coil Ø
38 (1.5)
Frequency Response Hz
32 ÷ 400
Magnet size D x d x h mm (in.)
100 x 50 x 25 (4 x 2 x 1)
Weight of one component kg (lb.)
3 (6.6)
Magnet
High density flux ferrite
Cone
Polypropylene with Mica injection
Xmech mm (in.)
16 (0.63)
D mm
215
Xmax mm
9
Re Ohm
3,3
Fs Hz
36
Le mH
2,15
Vas I
34
Mms g
106
Cms mm/N
0,18
BL T*m
8,5
Qts
0,92
Qes
1,13
Qms
5
Spl dB
89
A
257 mm
10.2 in.
B
234 mm
9.2 in.
C
116 mm
4.6 in.
D
104 mm
4.1 in.
HERTZ Dieci 12" 1000W 4 Ohm Dvc Subwoofer (Ds 30.3)
$189.99
Hertz DS 30.3 car audio subwoofers box offers high efficiency and exceptional power handling. Equipped with a polypropylene membrane and butyl rubber surround, they provide high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation, increasing their reliability.The Dieci subwoofers are designed for use in compact sealed or reflex enclosures; thanks to an exclusive, carefully thought-out design, they can be used in any installation.
Size mm (in.)
300 (12)
Power Handling - Continuous W
250
Power Handling - Peak W
1000
Impedance Ohm
4
Voice Coil Type
single
No Filter Component
Subwoofer
Voice Coil Ø
38 (1.5)
Frequency Response Hz
28 ÷ 300
Magnet size D x d x h mm (in.)
115 x 50 x 25 D x d x h (in.) (4.5 x 2 x 1)
Weight of one component kg (lb.)
4 (8.8)
Magnet
High density flux ferrite
Cone
Polypropylene with Mica injection
Xmech mm (in.)
9
D mm
258
Xmax mm
9
Re Ohm
3,3
Fs Hz
32
Le mH
2,2
Vas I
70
Mms g
133
Cms mm/N
0,18
BL T*m
11,2
Qts
0,62
Qes
0,71
Qms
5,14
Spl dB
91
A
306 mm
12 in.
B
279 mm
11 in.
C
132 mm
5.2 in.
D
120 mm
4.7 in.
HERTZ Dieci 3.5" 2-Way Coaxial Speaker - Pair (Dcx 87.3)
$134.99
Hertz DCX 87.3 coaxial speaker combines a woofer made of the highest performance materials with a neodymium tweeter featuring the exclusive PEI dome. Despite its compact size, the DCX 87.3 features an oversized magnetic group for ultimate control, still maintaining a compact size. For those who look for a high-performance two-way coax, the DCX 87.3 is able to ensure wide frequency response and excellent sound in any installation.
Component
Two way coaxial
Size mm (in.)
87 (3.4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Woofer Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
130 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
60 x 24 x 8 (2.4 x 0.9 x 0.3)
Weight of one speaker kg (lb.)
0,31 (0.68)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
70
Re Ohm
3,1
Fs Hz
190
Vas I
0,7
Mms g
2,0
Cms mm/N
0,35
BL T*m
2,5
Qts
1
Qes
1,25
Qms
5,66
Spl dB
92
A
87 mm (3.4 in.
A3
120 mm (4.7 in.)
B
81 mm (3.2 in.)
C
45 mm (1.8 in.)
D
34 mm (1.3 in.)
HERTZ Dieci 4" 2-Way Coaxial Speaker - Pair (Dcx 100.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, Hertz DCX 100.3 car audio coaxial is designed with maniacal care to provide linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
100 (4)
Power Handling - Continuous W
30
Power Handling - Peak W
60
Impedance Ohm
4
Frequency Response Hz
70 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 10 (2.7 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,45 (0.99)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
85
Re Ohm
3,3
Fs Hz
115
Vas I
1,7
Mms g
5,0
Cms mm/N
0,38
BL T*m
3,5
Qts
0,79
Qes
0,96
Qms
4,33
Spl dB
92
A
99 mm (3.9 in.)
A3
129 mm (5.1 in.)
B
94 mm (3.7 in.)
C
50 mm (2.0 in.)
D
43 mm (1.7 in.)
HERTZ Dieci 4X6" 2-Way Coaxial Speaker - Pair (Dcx 460.3)
$164.99
Hertz DCX 460.3car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. This 2-way coax speaker is designed to satisfy specific installation and listening needs. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level.
Component
Two way coaxial
Size mm (in.)
(4 x 6)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Depth mm (in.)
53 (2.1)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 32 x 10 (3.1 x 1.3 x 0.4)
Weight of one speaker kg (lb.)
0,58 (1.28)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
103
Re Ohm
3,3
Fs Hz
90
Vas I
6,2
Mms g
6
Cms mm/N
0,41
BL T*m
3,8
Qts
0,79
Qes
0,92
Qms
5,20
Spl dB
93
A1
155 mm (6.1 in.)
A2
97 mm (3.8 in.)
B1
146 mm (5.7 in.)
B2
89 mm (3.5 in.)
C
53 mm (2.1 in.)
D
45 mm (1.8 in.)
HERTZ Dieci 5" 2-Way Coaxial Speaker - Pair (Dcx 130.3)
$134.99
To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact.
Component
Two way coaxial
Size mm (in.)
130 (5)
Power Handling - Continuous W
40
Power Handling - Peak W
80
Impedance Ohm
4
Frequency Response Hz
65 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
70 x 32 x 15 (2.7 x 1.3 x 0.6)
Weight of one speaker kg (lb.)
0,56 (1.23)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
112
Re Ohm
3,3
Fs Hz
82
Vas I
7
Mms g
7,4
Cms mm/N
0,51
BL T*m
3,8
Qts
0,76
Qes
0,93
Qms
4,3
Spl dB
93
A
130 mm (5.0 in.)
A3
151 mm (5.9 in.)
B
116 mm (4.6 in.)
C
59 mm (2.3 in.)
D
52 mm (2.0 in.)
HERTZ Dieci 5X7" 2-Way Coaxial Speaker - Pair (Dcx 570.3)
$174.99
Hertz DCX 570.3 car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level. This 2-way coax speaker is designed to satisfy specific installation and listening needs.
Component
Two way coaxial
Size mm (in.)
(5 x 7)
Power Handling - Continuous W
60
Power Handling - Peak W
120
Impedance Ohm
4
Depth mm (in.)
66 (2.6)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
60 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,76 (1.67)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Water-repellent pressed paper
Dome
PEI
D mm
136
Re Ohm
3,3
Fs Hz
81
Vas I
10,7
Mms g
10,8
Cms mm/N
0,36
BL T*m
4,3
Qts
0,82
Qes
1,00
Qms
4,56
Spl dB
93
A1
220 mm (8.7 in.)
A2
141 mm (5.6 in.)
B1
182 mm (7.2 in.)
B2
127 mm (5 in.)
C
66 mm (2.6 in.)
D
59 mm (2.3 in.)
HERTZ Dieci 6X9" 3-Way Coaxial Speaker - Pair (Dcx 690.3)
$174.99
Hertz DCX 690.3 Dieci series car audio coaxials use an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange, and a PEI dome tweeter. The result is linearity, wide dispersion, and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels. An authentic 3-way coax capable of reproducing a wide frequency spectrum.
Component
Three way coaxial
Size mm (in.)
(6 x 9)
Power Handling - Continuous W
90
Power Handling - Peak W
180
Impedance Ohm
4
Depth mm (in.)
98 (3.9)
Woofer Voice Coil Ø mm (in.)
25 (1.0)
Frequency Response Hz
45 ÷ 21k
Woofer Magnet size D x d x h mm (in.)
80 x 40 x 15 (3.1 x 1.6 x 0.6)
Weight of one speaker kg (lb.)
0,95 (2.09)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
High density flux ferrite
D mm
170
Re Ohm
3,4
Fs Hz
66
Vas I
25,7
Mms g
16,5
Cms mm/N
0,35
BL T*m
3,9
Qts
1,12
Qes
1,55
Qms
4,06
Spl dB
93
A1
237 mm (9.3 in.)
A2
162 mm (6.4 in.)
B1
224 mm (8.8 in.)
B2
153 mm (6.0 in.)
C
98 mm (3.9 in.)
D
77 mm (3.0 in.)
HERTZ Hertz Marine 10M Remote Controller Extension Cable (Hma C1310)
$174.99
HMA C1310 extension cable is made to connect CAPRI HD1 to the CAPRI H100 main unit.
Optional for CAPRI - 10 mt.
HERTZ Hertz Marine 6M Remote Controller Extension Cable (Hma C1306)
$119.99
13 pin remote controller extension cable 6 mt.
Optional for HMR 50.
HERTZ Hertz Marine Remote Controller Y-Splitter Cable (Hma C13Y)
$109.99
13 pin y cable.
Optional for HMR 50
HERTZ Mille 10" (250Mm) Subwoofer Grille - Single (Mg 250.3...
$114.99
Discover the MILLE PRO MG 250.3, a specially designed speaker grille from Hertz. Tailor-made for Mille Legend/Pro subwoofers, it offers complete protection for your subwoofer. It features a robust metal structure consisting of a solid cast aluminum ring and a black steel mesh grille with a diamond-cut Hertz logo. The mounting screws are completely hidden, allowing for elegant integration into the vehicle cabin. Included are M5 self-tapping hexagon socket screws with bit driver.Physical SpecificationsA 274 mmW 45 mm
HERTZ Mille Legend 10" (250Mm) Subwoofer Grille - Single (Mlg...
$124.99
The optional MLG 2500.3 Hertz Mille Legend subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.
Size mm (in.)
250 (10)
No Filter Component
Grille
HERTZ Mille Pro 12" (300Mm) Subwoofer Grille - Single Unit...
$114.99
Designed for MP 300 D2/D4.3 , MG 300.3 grille features:1. Tailor-designed for Mille Legend/Pro subwoofers, providing total protection.2. Full metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo3. Mounting screws totally hidden for a superior integration within the car cabin.4. M5 self-tapping hexagon socket screws with bit driver included.
No Filter Component
GRILLE
A
327 mm
12.8 in.
B
45 mm
1.7 in.
HERTZ Mille Pro 12" (300Mm) Subwoofer Grille - Single Unit...
$134.99
The optional MPG 300 Hertz Mille PRO subwoofer grille is made of die-cast aluminium, featuring diamond-cut aluminium Hertz logo.
Size mm (in.)
300 (12)
No Filter Component
Grille
HERTZ Mille Pro 8" (200Mm) Subwoofer Grille - Single Unit...
$124.99
Designed for ML 2000.3, MG 200.3 grille features:1. Tailor-designed for Mille Legend/Pro subwoofers, providing total protection.2. Full metal sturdy structure composed by a solid cast aluminium ring and a steel mesh black grille featuring an elegant diamond-cut Hertz Logo3. Mounting screws totally hidden for a superior integration within the car cabin.4. M5 self-tapping hexagon socket screws with bit driver included.
No Filter Component
Grille
A
233 mm
8.78 in.
B
38 mm
1.5 in.
HSP 10 Pack x Roll R Cover Service Kit -...
$100.00
The HSP 4x4 Roll R Cover Service Kit 10 Pack (SERVICE3.5-10PACK) is designed for maintaining multiple HSP Roll R Cover Series 3.5 and reconditioned Series 3 systems. Ideal for workshops, installers or fleet servicing, this bulk kit provides a convenient solution for keeping roller covers operating smoothly and reliably.
Each service kit is engineered to support routine maintenance, helping preserve the performance of moving components while extending the lifespan of your Roll R Cover systems. The 10-pack format ensures you have the necessary components on hand for efficient servicing across multiple vehicles.
Designed for seamless compatibility, these kits integrate easily with existing Roll R Cover setups, allowing straightforward servicing without complex installation requirements.
Key Features & Benefits
Includes 10 x Roll R Cover Service Kits for bulk servicing
Designed for HSP Roll R Cover Series 3.5 and reconditioned Series 3 systems
Ideal for workshops, installers and fleet maintenance
Supports routine servicing and preventative maintenance
Helps maintain smooth and consistent roller cover operation
Extends the lifespan of Roll R Cover systems
Easy integration with existing Roll R Cover setups
The HSP 4x4 Roll R Cover Service Kit 10 Pack provides a practical and efficient solution for maintaining multiple Roll R Cover systems. Designed for reliability and convenience, it ensures consistent performance across ongoing service and maintenance requirements.
Specifications
Brand: HSP 4x4
Product: Roll R Cover Service Kit (10 Pack)
Compatibility: Series 3.5 & Reconditioned Series 3
Part Number: SERVICE3.5-10PACK
HSP 1x Roll R Cover Service Kit - Suits Series...
$15.00
The HSP 4x4 Roll R Cover Service Kit (SERVICE3.5) is designed to maintain the performance and reliability of your HSP Roll R Cover Series 3.5 and reconditioned Series 3 systems. Built for long-term upkeep, this kit provides the essential components needed to keep your roller cover operating smoothly in everyday conditions.
Regular servicing helps preserve the functionality of moving parts, ensuring consistent operation while extending the lifespan of your Roll R Cover. Whether used for preventative maintenance or restoring performance, this kit supports reliable use across work, touring and daily driving environments.
Engineered for seamless compatibility, the service kit integrates easily with existing Roll R Cover systems, allowing efficient maintenance without complex installation.
Key Features & Benefits
Designed for HSP Roll R Cover Series 3.5 and reconditioned Series 3 systems
Supports routine maintenance and servicing of roller cover components
Helps maintain smooth, consistent operation
Extends the lifespan of your Roll R Cover system
Suitable for preventative maintenance and performance restoration
Easy integration with existing Roll R Cover setups
The HSP 4x4 Roll R Cover Service Kit is an essential solution for maintaining the performance, reliability and longevity of your roller cover system. Designed for durability and ease of use, it helps ensure your setup continues to perform at its best.
Specifications
Brand: HSP
Product Name: Roll R Cover Service Kit – Series 3.5
SKU: SERVCIE3.5_1020_13112
Manufacturer Part Number: SERVCIE3.5
UPC: HSP-SERVCIE3.5
HSP 4X4 Load Rack Pro Rooftop Tent Mounting Guide –...
$150.00
The HSP 4x4 Load Rack Pro Rooftop Tent Mounting Guide provides essential information for safely installing a rooftop tent onto HSP Load Rack systems. Designed to ensure correct weight distribution and compatibility, this guide helps maintain performance, safety and long-term reliability when mounting rooftop accessories.
For proper installation, it is critical that the weight of the rooftop tent is supported by the crossbars and not placed on the accessory brackets. The tent rails must sit directly on top of the crossbars, allowing weight to be evenly distributed across the system.
Important Fitment Guidelines
Rooftop tent weight must NOT be supported by accessory brackets
Tent rails must sit directly on the crossbars
Weight must be evenly distributed across both bars
If tent mounting points fall within crossbar spacing, it is NOT compatible
Crossbar Distance & Compatibility Reference
BYD SHARK 6 2025+ (1010-LJ1 / LR2-S) – 1294mm
FORD RANGER / RAPTOR 2022+ (1210-LJ1 / LR2-S) – 1210mm
GWM HAVAL CANNON 2020+ (1310-LJ1 / LR2-S) – 1344mm
GWM HAVAL CANNON ALPHA 2024+ (1320-LJ1 / LR2-S) – 1344mm
ISUZU D-MAX 2021+ (1410-LJ1 / LR2-S) – 1334mm
KIA TASMAN 2025+ (1710-LJ1 / LR2-S) – 1317mm
LDV T60 2018+ (1810-LJ1 / LR2-S) – 1295mm
LDV TERRON 9 2025+ (1820-LJ1 / LR2-S) – 1018mm
MAZDA BT-50 TF 2020+ (1910-LJ1 / LR2-S) – 1334mm
MITSUBISHI TRITON MV 2024+ (2010-LJ1 / LR2-S) – 1280mm
NISSAN NAVARA 2021+ (2110-LJ1 / LR2-S) – 1250mm
TOYOTA HILUX SR5 / GR 2015+ (2410-LJ1 / LR2-S) – 1292mm
TOYOTA HILUX SR 2015+ (2411-LJ1 / LR2-S) – 1292mm
VOLKSWAGEN AMAROK 2023+ (2510-LJ1 / LR2-S) – 1210mm
MG U9 2025+ (2710-LJ1 / LR2-S) – 1018mm
Compatibility Note
If your rooftop tent mounting rails fall within the listed crossbar distances, the setup is NOT compatible
Universal direct-to-tub systems may vary depending on installation
Always confirm your tent rail spacing sits on top of the crossbars
Accessory Bar Bracket Kit
Part Number: ACC-BRACKET-KIT
Designed to support accessory mounting on HSP Load Rack systems
Not intended to carry primary rooftop tent load
This guide ensures safe and correct installation of rooftop tents on HSP Load Rack systems. Following these recommendations will help maintain structural integrity, improve load distribution and ensure long-term reliability for your setup.
HSP Tail Assist (Dampener Only) Suits Ford Ranger/Raptor PX -P12-1
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Install System
Got a spare 20 minutes?
Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Why HSP?
Proudly made in Australia, the Roll R Cover Series 3.5 is the only fully Australian-manufactured roll top. Built in custom facilities in Country Victoria, it supports local jobs and the economy. The units are designed and tested locally, ensuring top-notch quality and reliability. HSP is also 100% Australian owned!
Features
Strut system dampens the drop of the tailgate
Reduces tailgate weight while inclining
Enhances safety during loading and unloading
Installation time: Less than 20 minutes
No special skills required
Quick, easy, and stress-free installation
Proudly manufactured in Australia
Supports local jobs and economy
Ensures high-quality, locally tested product
HSP Tail Assist (One Dampener Only) Suits Bt50 UP+UR 2013-2020...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
MAZDA
BT-50
HSP Tail Assist (One Strut Dampener Only) Suits Navara D23...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
NISSAN
NAVARA NP300
HSP Tail Assist (Single Strut Dampening Only) All New Volkswagen...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
VW
AMAROK
HSP Tail Assist (Single Strut Dampening Only) Suits Mitsubishi Triton...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
MITSUBISHI
TRITON
HSP Tail Assist (Single Strut Dampening Only) Suits Volkswagen Amarok...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a twin strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Installation
Got a spare 20 minutes? Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Two-Way Strut System
The HSP TailGate Assist uses a two-strut system that works in perfect harmony. The first strut is designed to dampen the decline of the tailgate, so the user can let the tailgate drop without worrying. The second strut works by offsetting the tailgate’s weight when inclining, allowing for an effortless lift.
Compatibility
VW
AMAROK
HSP Tail Assist Dampener Only Suits Ford Ranger/Raptor Next Gen...
$125.00
The TailGate Assist by HSP is designed to reduce the heaviness of the tailgate. It works via a strut system which effortlessly dampens the drop of the tailgate and reduces weight while inclining. What does this mean? You’ll always stay safe when loading and unloading your vehicle.
Easy Install System
Got a spare 20 minutes?
Almost the whole HSP TailGate Assist range can be installed in less than 20 minutes and does not require any special skills to install. It’s quick, easy and stress-free.
Why HSP?
Proudly made in Australia, the Roll R Cover Series 3.5 is the only fully Australian-manufactured roll top. Built in custom facilities in Country Victoria, it supports local jobs and the economy. The units are designed and tested locally, ensuring top-notch quality and reliability. HSP is also 100% Australian owned!
Features
Strut system dampens the drop of the tailgate
Reduces tailgate weight while inclining
Enhances safety during loading and unloading
Installation time: Less than 20 minutes
No special skills required
Quick, easy, and stress-free installation
Proudly manufactured in Australia
Supports local jobs and economy
Ensures high-quality, locally tested product
LIGHTFORCE Universal Wiring Harness for Driving Lights – Plug &...
$137.70
$153.00
Lightforce BEAST 3-Mode Wiring Harness Kit
Complete your BEAST setup with true plug-and-play simplicity. This dedicated Lightforce wiring harness is specifically designed for BEAST 3-mode LED driving lights, allowing seamless integration and full control of Spot, Flood, and BEAST modes.
No complex wiring or guesswork required — simply connect and get your lights running quickly and reliably.
Key Benefits
Designed specifically for Lightforce BEAST 3-mode driving lights
True plug-and-play installation — no rewiring required
Supports both positive and negative switching automatically
Includes HB3 and H4 adaptors for easy headlight integration
Single 8-pin connector for clean and simple installation
Easy Installation
Single moulded 8-pin connector (8mm diameter) for quick firewall routing
Direct connection to BEAST 3-mode smart switch
No need to modify factory wiring
Pre-configured for hassle-free setup
Smart Switching Compatibility
The harness automatically handles both positive and negative switching electronically, ensuring compatibility across a wide range of vehicles. Output to the switch is always positive, eliminating the need for manual configuration.
What’s Included
1 x 12V BEAST Driving Light Universal Wiring Harness (with relay)
1 x BEAST 3-Mode Rocker Switch (universal dash mount & TY2 compatible)
1 x HB3 Headlight Patch Harness
1 x H4 Headlight Patch Harness
Additional terminals, cable ties, and mounting hardware
User instructions
Specifications
Voltage: 12V
Relay: 40 Amp
Switching: Automatic positive or negative switching (electronic control)
Why Choose This Harness
Purpose-built for BEAST driving lights
Simplifies installation with minimal effort
Ensures reliable and consistent performance
Ideal for both DIY and professional installations
FAQs
Is this compatible with all vehicles?Yes, it supports both positive and negative switching, making it compatible with most 12V vehicles.
Do I need to modify my wiring?No, this is a plug-and-play system designed for easy installation without modifying factory wiring.
Does it include everything needed for installation?Yes, the kit includes harness, switch, adaptors, and mounting accessories.
Is this required for BEAST lights?It is recommended to ensure full functionality of the 3-mode system.
Complete Your Setup
Pair your Lightforce BEAST driving lights with the correct wiring harness to ensure optimal performance, reliability, and ease of installation.
Mounting Kit Suits Suits Next Gen Ford Ranger/Raptor Factory Cargo...
$150.00
Selected models of the Next-Gen Ford Ranger will come equipped with a factory cargo management system. While the HSP Roll-R-Cover will function normally if the cargo management rail is removed, their mounting kit provides a solution for those who wish to retain this convenient accessory. With our kit, you can seamlessly keep the cargo management feature integrated with your Roll-R-Cover.
Below, you can see the Accessory Rail (Silver) and 2x Tie Downs (Black) securely mounted to the rail.
MSA 4X4 Power Fold Towing Mirrors TMA050 Power Fold Mirror...
$27.90
$31.00
PRODUCT TYPE: MSA POWER FOLD™
SUITS: ALL MSA Power Fold ™ Towing Mirror Models
Quick & Easy Fitment!
MSA Drop Slide Clip On Table with Cutlery Roll -...
$136.80
$152.00
MSA Drop Slide™ Clip-On Table with Cutlery Roll
Part Number: 30008
The MSA Drop Slide™ Clip-On Table with Cutlery Roll is the perfect addition to your touring, camping, and 4WD kitchen setup. Designed to fit all MSA Drop Slides™, this lightweight and practical table provides additional food preparation space exactly where you need it, helping you make the most of your campsite without taking up valuable storage room.
Quick and easy to install, the Clip-On Table securely attaches to your MSA Drop Slide™ and provides a convenient surface for meal preparation, cooking, drinks, and general campsite organisation. Finished in a durable black powder-coated finish, it is built to withstand demanding outdoor conditions while remaining lightweight and easy to store.
Included with the table is a durable MSA Canvas Cutlery Roll that attaches to the outer edge of the table, keeping utensils and cooking accessories organised and within easy reach. A convenient Velcro side pocket accommodates a 380mm x 290mm cutting board, allowing you to create a complete portable kitchen workstation.
Features
Compatible with all MSA Drop Slides™
Provides additional food preparation and serving space
Includes MSA Canvas Cutlery Roll
Protective carry case included
Lightweight and easy to transport
Stores comfortably inside MSA Storage Drawer Systems
Quick and easy installation
Durable black powder-coated finish
Integrated bottle opener slot
Cutlery Roll folds neatly for compact storage
Velcro side pocket suits a 380mm x 290mm cutting board
MSA 4X4 Lifetime Guarantee on Clip-On Table
2 Year Guarantee on Cutlery Roll
Important Information
Maximum table load rating: 10kg
Do not sit or lean on the table
Do not cut directly on the table surface
A cutting board is recommended
Utensils and cutting board are not included
Frequently Asked Questions
Will this Clip-On Table fit my MSA Drop Slide™?
Yes. The MSA Drop Slide™ Clip-On Table is designed to be compatible with all MSA Drop Slide™ models.
Does the table include a cutlery organiser?
Yes. The package includes a durable MSA Canvas Cutlery Roll that attaches directly to the table for easy utensil storage and access.
What is the maximum weight capacity of the Clip-On Table?
The table has a maximum load limit of 10kg and is designed for food preparation, cooking accessories, and light campsite use.
MSA ORGDDT Seat Organiser with Dropdown Table
$136.80
$152.00
FEATURES:
Durable, heavy-duty canvas
12 pockets of various sizes
Injection moulded fold-away drop down table
Buckles & adjustable straps for easy installation
Fits any standard seat
Front Velcro strip to hold items in place & prevent sagging
MSA ORGS Seat Organiser
$107.10
$119.00
FEATURES:
Durable, heavy duty canvas
12 pockets of various sizes
Buckles & adjustable straps for easy installation
Fits any standard seat
Front Velcro strip to hold items in place & prevent sagging
MSA PREMIUM CUTLERY PACK
$150.30
$167.00
20004 PREMIUM CUTLERY PACK
Part Number: 20004
Luxury and camping, does go together.
The MSA 4x4 Premium Cutlery Pack brings a touch of luxury to a camping trip or day out with family. All the cutlery items required to make a simple lunch or a three course dinner under the stars are contained within the durable, hard wearing 12oz premium canvas pack. Each item is manufactured from high quality, food grade materials and are MSA 4x4 branded for a distinctive look.
The MSA 4x4 Cutlery Pack contains, a cutlery set, made with 410 stainless steel and finished with a black PVD (Physical Vapor Deposition) coating. Along with a multi purpose set of sharp, high quality knives, made with black Teflon coated stainless steel and a durable polypropylene handle. Also included is an essential set of utensils, with a spatula and serving spoon made with PA6 nylon coated in food grade silicone and a pair of tongs made with 430 stainless steel coated in food grade silicone. And finally a sustainably sourced bamboo cutting board, coated with a food grade oil, creating a higher level of hygiene, surface protection and product longevity.
Perfectly compliments an MSA 4x4 Clip-on Table or Drop Slide with Table and the light weight compact design allows it to easily stow away within an MSA 4x4 Storage Drawer System.The MSA 4x4, 2 Year Manufacturer’s Warranty applies to all the components.
NOTE: Sharp objects contained inside, please handle with care. Hand wash only, damage from dish washing MAY NOT be covered by the MSA 4x4 2 Year Manufacture's Warranty. General maintenance of the Bamboo Cutting Board requires regular recoating of food grade oil.
Includes:
Premium Canvas Pack
Cutlery Set:- 6x Knives- 6x Forks- 6x Tablespoons- 6x Teaspoons
Cooking Knives Set- 1x Cleaver Knife- 1x Chef Knife- 1x Paring Knife
Utensil Set- 1x Spoon- 1x Spatula- 1x Tongs
Bamboo Cutting Board
Features:
Durable, hard wearing 12oz premium canvas pack
Light weight and compact
Convenient, zip secured pocket
Velcro flat to secure cutlery items
Elastic straps to hold cooking knives secure
Elastic straps to hold utensils secure
Pocket to hold cutting board secure
All items are MSA branded
2 Year Manufacture's Warranty on all items
MSA TMA001 Extension Infills for all Towing Mirrors
$27.90
$31.00
The MSA 4X4 Towing Mirror Extension Infills are designed to fill the space created when the MSA 4X4 Towing Mirror is permanently left in the extended position.
MSA Toyota Powerfold Towing Mirror Extension Infill With Camera Provision-...
$31.00
MSA Toyota Powerfold Towing Mirror Extension Infill With Camera Provision- TMA150
SUITS: ALL MSA Power Fold™ Towing Mirror Models Quick & Easy Fitment!
The large single mirror lens creates less confusion and enhanced safety while driving. The four, easily adjustable positions, provide greater vision, with less vibration to any towing situation, while maintaining ADR compliance and safety. When the mirror is rotated into the horizontal position, the mirror’s actuator automatically adapts, allowing for standard adjustments (up, down, side to side) from the vehicle’s standard mirror controller. This caters to drivers of differing height and seated positions. Designed to fold inwards or outwards when bumped in car parks, or when contact is made with trees and other obstacles around the vehicle. Simple to fit. MSA 4X4’s Towing Mirrors mount onto a vehicle door in the same position as the existing mirrors. Most factory mirror functions are retained and come with the choice of black or chrome.The MSA 4X4 patented Towing Mirrors are manufactured extremely tough.Injection moulded and die cast aluminium components deliver a high-quality towing mirror to withstand Australian conditions. A great all-around mirror for towing caravans, camper trailers, trailers, boats and horse floats. Available to suit a growing range of towing vehicles.
MSA 4X4’s patented, SEMA award-winning Towing Mirrors feature a large single mirror that pivots on a heavy-duty extension slide. Allowing the mirror to extend out when towing and return to a normal driving position, when not towing.
Government guidelines state that the driver is required to see 20m past the widest point of the towed vehicle. MSA 4X4 has created a range of Towing Mirrors that meet this guideline and are specifically designed for Australian towing vehicles.
The mirror is the subject of Chinese utility model No. 201721652844.X and international patent application No. PCT/AU2017/051320, as well as corresponding patents and patent applications in Australia, Belgium, Canada, China, France, Germany, the Netherlands, New Zealand, South Africa, Spain, the United Kingdom and the United States of America. The mirror is also the subject of international patent application No. PCT/AU2020/050810, as well as corresponding patents and patent applications in Australia, Canada, China, Europe, New Zealand, South Africa and the United States of America. The shape of the mirror is protected by Australian design registration No. 201715134 and Chinese design registration No. 201830077185.5.
MSA URL Ultimate Tool Roll
$107.10
$119.00
Dimensions: 120(L) x 42(H) When opened
FEATURES:
120cm L x 42cm H when open
Heavy-duty double-layered 12oz canvas
Separate top flap and elastics to keep your tools in place
18 pockets of various sizes
2 x 50mm Velcro seal seat belt wraps
Heavy duty moulded rubber carry handle for added convenience
Allows for safe and easy storage anywhere
NARVA 250 Lumed Detatchable Head Torch- 71426
$159.43
Featuring a unique detachable lamp with integrated magnet for increased user applications, the 71426 is incredibly versatile. The head lamp allows selection between a powerful spot beam with 60 metre beam pattern or 120 degree flood light. There is also an option to combine the spot or flood beam with an arc shaped flood beam for even more powerful lighting.
Technical Information
LEDs
High efficiency COB LED
LUMENS
150 & 120
IP RATING
IP65
SIZE
83x56x42mm
WEIGHT
200g
COMPRISES
1 x 71426 Rechargeable L.E.D Head Lamp; 1 x 240V Charger; 1 x USB Charger;
NARVA 4" Ex2 Driving Lamp Kit (Single)- 72142
$189.00
The Narva 4" EX2 Driving Light (12/24V) is part of the EX2 range, designed for DIY 4WD enthusiasts as well as fleet and transport operators. Built for performance and reliability, it offers an exceptional beam pattern that enhances visibility in all conditions. With an extra-easy installation process and durable construction, the EX2 driving light ensures long-lasting service even in demanding environments. Its extensive customisation options allow you to tailor the light’s look and performance, helping you express your style while enjoying powerful illumination.
Features:
1x 4" EX2 driving light suitable for 12/24V systems
Exceptional beam pattern for improved visibility
Quick and simple installation
Heavy-duty build for durability in tough conditions
Customisable design options for a personalised look
Ideal for 4WD, fleet, and transport applications
Warranty: 7 years
Specifications
Input Voltage Range:
9-33V
Current Draw:
@12V: 5A (Single)
Leds:
12 x High Power LEDs
Lumens:
6,590 Raw / 4,520 Effective
Ip Rating:
IP68 & IP69K
Colour Temperature:
5700°K
Other:
Beam Type: Hybrid
NARVA Handheld Led Inspection Lamp- 71322
$199.00
The new See Ezy Rechargeable LED Inspection Light takes the popular Narva workshop light to a whole new level. With up to 16 hours continuous runtime, an effective output of 500 or 1000 effective lumens, and IP65 and IK07 rated, the new See Ezy Inspection lamp is long lasting, powerful and virtually indestructible!Shock resistant body tested to IK07 impact resistant levels, a virtually unbreakable polycarbonate lens and weatherproof rubber housing (IP65) chemically tested to resist oils and fuels. Ideal for workshops, commercial and industrial environments. Featuring a sealed integrated switch, two heavy-duty magnets.With 16 hours runtime at 500 effective lumens and 8 hours runtime at 1000 effective lumens. Torch spotlight produces 100 effective lumens. Auto turn off every 2 hours to preserve battery if unused. Flood light will flash as an early warning turn off every 2 hours. Hold power button for 10 seconds to disable auto turn-off. With fast USB-C charging via built-in charging port and compact docking station, charging is made even easier. This ensures the light is always charged ready for use.Contains: 1 x See Ezy Rechargeable LED Inspection Light; 1 x Lithium battery with no memory effect; 1 x 240V docking station for workshop recharging; 1 x 240V power plug and USB-C to USB-A cable for fast charging via USB; Integrated heavy duty magnets for hands free operation; Concealed swival hanging hook.
Technical Specifications
Brand
Narva
Charging Time
4.5 - 5.5 hours
Input Voltage Range
3.7V / 5200mAh Li-ion
IP Rating
IP65 and IK07
LEDs
36 SMD LEDs
Lumens
Flood:500/1000 lm Spot: 100lm
Operating Temperature
0°C – 40°C
Operating Time
16/8 hours
Size
79 x 107 x 305mm
Weight
590g
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
