Fatz Fabrication
FATZ FABRICATION Safari 4" Id Ram Head (Clamps Over Outside Of 4" Tube) - 000-135-900
$155.00
Safari 4″ Ram head.
4″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Safari 4" Id Ram Head (Clamps Over Outside Of 4" Tube) - 000-135-910
$155.00
Safari 4″ Ram head.
4″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
Fatz Fabrication
FATZ FABRICATION Vdj70 Airbox Filter Bracket. Required For Fuel Master Filters To Fatz Airboxes - FFVDJ-AB-FLFBKT
$70.00
VDJ 70 Series Fuel Filter Bracket
A common addition to the engine bay on VDJ 70 series is an additional fuel filter. These are typically mounted behind the factory Airbox where our Airbox protrudes to. We have developed our fuel filter mounting bracket to mount to the Reservoir mounting location on the back of our Airbox, this enables you to retain your filter in a similar location and not require additional modification when fitting our Airbox. Made in 3mm Stainless steel. This will complement your Airbox fitment with a functional feature in your engine bay.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION Vdj70 Specific Battery Hold Down Clamp. 3Mm Stainless Steel. - FFVDJ-BAT-BKT
$30.00
3mm Stainless Steel Battery Clamps
Looking to bling up your engine bay a little to match your other Fatz products? Our Stainless Steel Battery Hold Down brackets are the go for you. Our Generic Battery Hold Down Bracket suits flat top maintenance free batteries as well as batteries with raised port access. 185mm hole centres to be compatible with N70 sized batteries. Battery Hold Down brackets are made in 3mm stainless steel, With Specific brackets available for VDJ 70 series to mount to the guard mounting location and pick up on the rod on the engine side of the battery.
FOCAL
FOCAL "Y" Adapter Cable For Impulse 4.320 Iso Standard -IW-IMP-EXT150
$100.00
IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs
Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers.
Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.
Developed with twisted cables to effectively eliminate disturbance
Three different lengths to suit all vehicles
Cut-resistant protective shield
Great flexibility for the easiest possible installation
Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320
No soldering required
Length: 5ft (1,50m)
FOCAL
FOCAL 6.5" Speaker Coaxial Component Protective Grills Covers Only (Pair) -GRILLE 6.5” (pair)
$120.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 6.5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL
FOCAL Auditor Evo Series 4" 2-Way Car Speakers -ACX100
$175.00
FOCAL ACX 100AUDITOR EVO SERIES 4" 2-WAY CAR SPEAKERS
The benefit of Focal innovation
Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness.
The aim of Auditor EVO
Focal's goal is to improve the audio experience in any type of car, and these impressive ACX 100 4" coaxial speakers will easily outperform your factory speakers and bring the fun back to your drive time. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter, with its handsome black lacquered finish, broadcasts high-frequency details that put standard tweeter designs to shame. An integrated, high-fidelity crossover ensures that the woofer handles only the lower frequencies and the tweeter only handles the highs, giving you a smooth sound overall.
Ready to ride
A polypropylene woofer cone and butyl rubber surround help these speakers live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound.
Product highlights:
2-way car speakers (pair)
4" polypropylene woofer cone with butyl rubber surround
Mylar inverted dome tweeter
rigid steel basket
mesh/ABS mesh grilles included
handles up to 30 watts RMS (60 watts peak)
frequency response: 80-21,000 Hz
sensitivity: 88 dB
impedance: 4 ohms
mounting depth: 1-15/16"
warranty: 1 year
MFR # ACX100
Item # 091ACX100
Features & specs
General
Speaker Size
4
Design
2-way
Tweeter Design
Inverted Dome
Impedance (Ohms)
4
Tweeter Composition
Mylar
Woofer Composition
Polypropylene
Woofer Surround
Butyl Rubber
Parts Warranty
1 Year
Labor Warranty
1 Year
Specifications
Sensitivity (1W at 1 meter)
N/A
Sensitivity at 2.83 volts
88
Frequency Response
80 - 21k Hz
Minimum RMS Wattage
---
Maximum RMS Wattage
30
Peak Power Handling (Watts)
60
Top-mount Depth (Inches)
1 15/16
Bottom-mount Depth (Inches)
2 1/8
Cutout Diameter or Length (inches)
3 11/16
Mounting Height (Inches)
0.443
Frame Width
4.027
Frame Length
4.027
What's in the box:
Two 2-way speakers
2 Grilles
Focal owner's manual
2 Grille mounting rings
Eight 1" Screws
8 Speed clips
Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)
FOCAL
FOCAL Bmw Speaker Ring Adaptor, Needed To Mount Speakers In X5 X6 | -BMW speaker ring adaptor X5 X6
$80.00
BMW SPEAKER RING ADAPTOR X5 X6 SPEAKER RING ADAPTOR
To install the Focal Inside IS BMW 100 / 100L or IC BMW 100 / 100L kits on your BMW X5 or X6 series, the Focal KIAC1122 spacer kit is required. Enjoy the optimal installation and superior sound quality for your journeys!
FOCAL
FOCAL Gr 3 Km - K2 Power M Line Grille For 3 Km (Each) -GRILLE 3” (each)
$65.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 3” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL
FOCAL Gr 5 Km - K2 Power M Line Grille For 5 Km (Each) -GRILLE 5”(each)
$100.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL
FOCAL Harley Speaker Ring Adaptor 5″ To 6.5″ -HARLEY speaker ring adaptor 5” to 6.5”
$85.00
These speaker adapters let you install select Focal speakers on 1998-2013 Harley-Davidson motorcycles. These mounting brackets are designed to fit all models equipped with a factory fairing, including the Road Glide.
FOCAL
FOCAL Harness -IW-SPK-SIM
$85.00
Harness IW-SPK-SIM simulates 4 ohm speaker load as required by various headunits.
FOCAL
FOCAL Harness -IW-SPK-SIM
$85.00
Harness IW-SPK-SIM simulates 4 ohm speaker load as required by various headunits.
FOCAL
FOCAL Harness Iso Cable Harness -IW-FORDV2-YISO
$100.00
The Focal Inside I IW FORD Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Ford original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : Ford vehicles from 2005 to 2021
FOCAL
FOCAL Harness Iso Cable Harness -IW-TOY-YISO
$100.00
FOCAL IW IMP EXT 150 "Y" ADAPTER CABLE FOR FOCAL IMPULSE 4.320 ISO STANDARD
Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IW IMP EXT 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers.
Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.
Developed with Twisted Cables to Effectively Eliminate Disturbance
Three Different Lengths to Suit All Vehicles
Cut-resistant Protective Shield
Great Flexibility for the Easiest Possible Installation
Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320
No Soldering Required
Length: 5 ft (1.50m)
DESIGNED IN FRANCE
For over 40 years, Focal has been designing and manufacturing free-standing and in-wall/in-ceiling loudspeakers for the home, Home Cinema systems, speaker drivers for cars, monitors for recording studios, open-back and closed-back Hi-Fi headphones, as well as audio solutions for boats and yachts. Based in Saint-Étienne in France, Focal has positioned itself as a global leader in its field, thanks to its constant commitment to new technologies and innovations.
FOCAL
FOCAL Harness Iso Cable Harness -IW-TOYV2-YISO
$100.00
The Focal Inside I IW TOY Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : Toyota vehicles from 2021
FOCAL
FOCAL Harness Iso Harness Cable -IW-VW-YISO
$120.00
ISO harness cable
The Focal Inside VOLKSWAGEN Y-ISO HARNESS car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. It allows connection to the original Volkswagen car radio and quick and easy connection of Focal Inside extension cables. Designed specifically for Volkswagen vehicles after 2005, this one-meter-long cable allows easy Plug & Play installation. Connection to the extension cable is via ISO connectors; no soldering is required.
FOCAL
FOCAL Inside Ford Y-Iso Harnesst-Harness Adapter For An Impulse Amplifier -IW-FORD-YISO
$100.00
FOCAL INSIDE FORD Y-ISO HARNESST-HARNESS ADAPTER FOR AN IMPULSE AMPLIFIER
Inside upgrade harness
Focal's Inside system upgrades include new aftermarket vehicle-specific speakers and subs, along with their Impulse 4.320 4-channel amp. Focal also offers a variety of cables and connectors that you'll need, including:
speaker wire harnesses for tweeters, subs, and center channel;
T-harnesses that connect the vehicle and factory radio to the upgrade system;
and extension cables to connect the T-harness to the amplifier.
This T-harness provides the upgrade connections between your select Ford vehicle and a Focal Impulse 4.320 amplifier by way of the appropriate extension cable (see below).
Product highlights:
Ford T-harness for a Focal Inside system upgrade
provides connections for an Impulse 4.320 amplifier
IMP EXT ISO 5' Extension Cable
accessory power and ground connections available
warranty: 1 year
MFR # IW FORD Y-ISO
Item # 091FORYISO
Features
Overview: This vehicle specific harness simplifies adding the Focal Impulse 4.320 amplifier to a compatible vehicle. The ISO extension cable (item number 091IMPEXT1, sold separately) must also be added to connect the amp. This adapter supplies the amp with a speaker level signal input, power, and ground, and connects the amp's output to the factory speaker wiring. (Power and ground for the amp are connected using the attached crimp connectors.) Please enter your vehicle information to confirm compatibility.
What's in the box:
Focal Inside vehicle specific adapter harness
FOCAL
FOCAL Inside Nissan Y-Iso Harness Head Unit Adaptation Cable -IW-NIS-YISO
$100.00
FOCAL INSIDE NISSAN Y-ISO HARNESS HEAD UNIT ADAPTATION CABLE
The Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 0.9ft (0.3m)
Compatibility: for Nissan vehicles since 2008
FOCAL
FOCAL Inside Pw Sup 600Amplifier Power Wiring Kit -IW-PWSUP600
$65.00
FOCAL INSIDE PW SUP 600AMPLIFIER POWER WIRING KIT
Power and ground wires for a Focal amp
Focal designed this wiring kit to provide power and ground connections for a Focal Impulse 4.320 amplifier. The kit includes:
20' power cable with ring terminal and in-line fuse holder installed,
3' ground cable with ring terminal installed,
30A fuse,
2 crimp-on butt connectors.
Note: This wiring kit is designed to provide only power and ground connections. This kit does not include speaker wire, RCA patch cables, or a remote turn-on wire.
Warranty: 1 year.
What's in the box:
20' Length of 12-gauge power wire with in-line fuse holder (ring-terminal on one end)
40" Length of 12-gauge ground wire (ring-terminal on one end)
15-amp ATO fuse (installed in fuse holder)
30-amp ATO fuse
Two 12-10 gauge crimp-splice connectors (yellow)
Other info:
MFR # IW PW SUP 600
Item # 091PWSUP60
Features
Overview: This power and ground wire kit pairs with the Focal ISO extension cable (item number 091IMPEXT1, sold separately) and vehicle specific harness when adding the Focal Impulse 4.320 amplifier to a compatible vehicle. 15-amp and 30-amp fuses are included.
FOCAL
FOCAL Mercedes Benz Iso Cable Harness -IW-MBZ-YISO
$120.00
The Focal Inside I IW MBZ Y-ISO HARNESS car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Mercedes original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : E-class from 2016, S-class from 2013, C-class from 2014 until 2019
FOCAL
FOCAL Peugeot, Head Unit To Iso Connectors | -IW-PSA-YISO
$100.00
IW PSA YISO HARNESS | Plug & Play Adapter for Citroën, DS & Peugeot | Impulse 4.320 Compatible
Seamless Integration. Factory Fit. Focal Precision.
The Focal IW PSA YISO HARNESS is a dedicated Plug & Play head unit adapter engineered for Citroën, DS Automobiles, and Peugeot vehicles. Designed specifically for the Focal Impulse 4.320 amplifier, it provides an effortless, OEM-grade connection between your vehicle’s original head unit and Focal Inside extension cables.
This precision-built harness allows fast and secure installation—no cutting, soldering, or modification required. Its ISO-standard connectors ensure a perfect fit and clean signal transfer, making it the ideal solution for achieving superior amplified sound while preserving your vehicle’s factory wiring integrity.
Key Features
• Designed for the Focal Impulse 4.320 digital amplifier• Plug & Play connectivity for Citroën, DS Automobiles & Peugeot• OEM-grade connectors for factory-fit reliability• Quick, clean installation – no soldering required• Direct link from head unit to amplifier• Length: 0.9ft (0.3m)• Compatible with vehicles manufactured since 2014
Note: Plug & Play harnesses are designed for use with factory head units only. For aftermarket systems, please use a standard wiring kit.
Focal IW PSA YISO – Factory Integration. Amplified by Focal.
FOCAL
FOCAL Renault Cable Harness -IW-REN-YISO
$100.00
The Focal Inside head unit adaptation cable for RENAULT/DACIA Y-ISO HARNESS is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Renault/Dacia original head unit and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 0.9ft (0.3m)
Compatibility: for Renault and Dacia vehicles since 2000
FOCAL
FOCAL Speaker Accessory -BAM XL
$169.00
FOCAL BAMXL Acoustic Absorption & Sound-dampening Material (Bulk Pack | 0.5mx2m)
Honeycombed damping material
Just like the acoustic foam inside a loudspeaker, the honeycombed damping material attenuates the speaker back wave and then increases the speaker performance.
Aluminum sheet
essential component to the sandwich effect realization. This process permits to increase the performance of the viscoelastic complex.
Viscoelastic complex
Self-adhesive, the butyl complex absorbs the vibrations of the surface with which it’s in contact. It highly attenuates the outside noise that gets inside the car. Less noise means more music.
Content: 50 x 200cm sheet
FOCAL
FOCAL Speaker Insulation Kit Installation Instructions -SASK
$69.00
Enhances the sound quality of any automotive loudspeaker installation by creating an Acoustic Barrier behind and around the speakers.
INSTALLATION INSTRUCTIONS:
The purpose of this kit is to isolate the back-wave of each speaker from the front wave of the speaker, The sound from the back of a speaker is the exact opposite to the sound from the front If the front and rear sounds meet cancellation will take place and sound quality will decline noticeably.
Mark and drill the speaker mounting holes. NOTE: Make sure you do not use the speaker as a template while you are drilling. Metal filings from the drill will be attracted to the speaker magnets and cause problems as they work their way inside the speaker. Remove all drill swarf and filings with a vacuum cleaner or moist kitchen towel These metal particles will eventually rust inside the door or get into the speakers.
With a pencil or felt pen mark a small line radiating away from each of the drilled holes. The purpose will be evident when you go to tighten the speaker with the lnstalPro seals in place, it will make it easier to locate the holes.
Clean down the outer door skin behind the speaker with methylated spirits or wax and grease remover. Pass the 20cm x 20cm ‘egg-crate’ pad through the speaker hole, peel off the backing paper and secure it to the outer door skin directly behind the loudspeaker. If you want a superb job of soundproofing we recommend lining the outer and inner door skins with Focal BAM, a sound-absorbing butyl rubber sheeting. This will do three things: absorb sound, stop panel resonance and create a barrier to sound escaping through assorted small gaps in the inner door skin. The egg-crate pad will absorb a large proportion of the speaker back-wave, the area directly behind the speaker is where the greatest effect can be had. If you already have BAM or similar lining your doors, this pad will adhere to it.
Choose the correct seal ring for the speaker and stick it to the door skin. Screw the speaker in place, compressing the seal ring. That will make a perfect seal so that sound does not escape around the speaker frame, a common problem because car doors are not always perfectly flat surfaces.
Adhere the 25mm x 200mm thick foam ring around the speaker, When you restore the plastic door trim this will direct the sound through the grille in the door trim and stop sound from spilling sideways into the cavity between the speaker cone and the door trim.
FOCAL
FOCAL Stereo Amplified Signal Converter -Hi-Lo V3
$105.00
In order to feed your amplifiers with an appropriate and qualitative audio signal, keeping your original head-units and the associated OEM controls, you can choose the converter HILO.V3.
HILO.V3 converts a stereo amplified signal in two low-level line outputs, eliminates parasitic interferences and generates separated grounds. You can now use an amplifier very simply, without any interference. It is now very easy to create a quality hi-fi install in your car. The selectable DC and AC voltages detection makes the HILO compatible with any original manufacturer head units.
Entirely developed by Focal, HILO is available under generation 3 with an impedance simulator that creates a speaker simulation network to avoid head-unit muting.
FOCAL
FOCAL Tweeter Kit (Pair) 4Khz - 21Khz, Complete With Inline Crossovers And Flush And Surface Mounting Accessories | - Twu1.5...
$125.00
The TWU1.5 tweeter is designed for custom installation with existing Universal range kits. Easy to fit, four different mounting options are available: flush fit, on angled stand, flat or straight behind the original grill, removing the tweeter from its Focal bracket. This inverted dome tweeter is made of aluminium/magnesium alloy. This gives the trebles an extended frequency response of up to 21 kHz, for clearer, more detailed reproduction.
Sold in pairs.
NATURAL, UNCOLOURED SOUND
The Integration range is synonymous not only with ease of installation but also and most especially, with sound quality. At Focal we pride ourselves in supplying equipment of impeccable quality: for example, a polyglass membrane for natural, uncoloured sound and an inverted dome aluminium/magnesium tweeter for clear, detailed reproduction.
RELIABILITY A TOP PRIORITY
The Focal spirit also encompasses the reliability of our ever evolving technological equipment. Butyl suspension ensures that your speakers will stand the test of time. You will be able to enjoy the Focal sound for a long time, thanks to our high quality design: manufacturing processes and the choice of materials are always high priorities for our engineers, guaranteeing a result that exceeds your expectations.
WHAT MAKES IT SPECIAL
High sensitivity
No-fuss treble adjustment
Shallow fitting
Improves on original-fit speakers
Dynamism and neutrality
FOCAL
FOCAL Volkswagen 180Mm Speaker Spacer Kit, Adapts Isu200 To 7.1” Vw Cut-Out -KIAC1120 (pair)
$110.00
"FOCAL INSIDE IW T3Y 2008"" WOOFERS FOR SELECT TESLA VEHICLES
Improve the bass kick in your Tesla
You enjoy the many benefits of your Tesla, but the bass response from the factory speakers may not be as electrifying as you'd like. But now the Inside Series brings Focal's famous sound to your electric vehicle. The best news of all is that Focal designs and builds these woofers to fit perfectly into Tesla Model 3 and Model Y vehicles. All the necessary mounting hardware is included, and integrated connectors connect to your existing factory speaker plugs — no cutting, splicing, or vehicle modifications required.
This rear image of the woofer shows off the stiff flax weave that stays lightweight, so it's easier to drive.
Famous Focal sound
Focal incorporates their innovative flax woofer cones into the Inside IW T3Y 200 8"" woofers. Focal discovered that a flax woofer cone produces a dynamic sound that's worthy of its reputation. At half the weight of fiberglass, these flax fibers help create a very rigid yet lightweight cone that ensures accuracy and limits unwanted vibrations. This efficient design means you'll get more accurate, punchy bass from your music.
Product highlights:
two 8"" woofers
designed to fit Tesla Model 3 and Model Y vehicles
Tesla-specific wire connectors (no cutting required)
8"" flax woofer cone with butyl rubber surround
neodymium magnets and 1.5"" voice coils
impedance: 4 ohms
power handling: 75 watts RMS (150 watts peak)
frequency response: 40-1500 Hz
sensitivity: 91 dB
grilles not included
warranty: 1 year
MFR # IW T3Y 200
Item # 091IWT3Y20
Features & specs
General
Speaker Size
Vehicle-specific
Design
1-way
Tweeter Design
---
Impedance (Ohms)
4
Tweeter Composition
---
Woofer Composition
Flax
Woofer Surround
Butyl Rubber
Parts Warranty
1 Year
Labor Warranty
1 Year
Specifications
Sensitivity (1W at 1 meter)
N/A
Sensitivity at 2.83 volts
91
Frequency Response
40 - 1.5k Hz
Minimum RMS Wattage
---
Maximum RMS Wattage
75
Peak Power Handling (Watts)
150
Top-mount Depth (Inches)
1 3/8
Bottom-mount Depth (Inches)
N/A
Cutout Diameter or Length (inches)
3 3/4
Mounting Height (Inches)
1.375
Frame Width
8.44
Frame Length
8.44
What's in the box:
2 Woofers
Quick start guide (English/ French/ German/ Italian/ Spanish/ Portugese/ Dutch/ Polish/ Russian/ Chinese/ Korean/ Japanese/ Arabic)
Focal window sticker
2 Adhesive backed Focal Inside badges
"
FOCAL
FOCAL Wiring Harnesses For Inside Packs -IW-IMP2.1
$120.00
The Focal Inside IW IMP 2.1 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL
FOCAL Wiring Harnesses For Inside Packs -IW-IMP2.2
$120.00
The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring.
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility
FOCAL
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Imp2.1 -IW-BMW-IMP2.1
$150.00
Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness
The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple.
This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.
FOCAL
FOCAL Wiring Harnesses For Inside Packs Iw-Bmw-Yiso -IW-BMW-YISO
$100.00
The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables.
* Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer.
Additional Information
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original head unit
Connection to the extension cable via ISO connectors
No soldering required
Length: 3.28ft (1 m)
Front Runner
FRONT RUNNER 10 Led Light Bar Vx250-Fl / 12V/ 24V / Flood Light - LIGH212
$130.50
$145.00
Keep your adventure going after the sun sets with this 10” LED Light Bar. The ECE compliant high performing LED creates a strong 3000 Kelvin flood beam pattern so your trail will always be well-lit.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aids in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislations of the countries must be observed.
Secures to your Front Runner Roof Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
Connect you 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to a Roof Rack Power Point*, powered by Hella Extension Cord - 3m/10'* power cord from your vehicles 12V accessory outlet.
*Note: The Roof Rack Power Point and Hella Extension Cord - 3m/10' are sold separately.Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Consists of:1 x Lightbar1 x Yellow cover1 x Bracket set1 x Bolt Kit
Product Dimensions:Light Bar:275mm (10.8") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with supplied bracket:328mm (12.9") L x 67mm (2.6") D x 55mm (2.2") H
Weight:875g (27.3oz)
Special Notes:Product type: On-road and off-roadSKU: LEDWL 115-FLFRLED supplier: OSRAMLumens: 150012/24V30W2.5 AmpsColor temperature: 3000 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: R112
Front Runner
FRONT RUNNER 10 Led Light Bar Vx250-Fl Mounting Bracket - RRAC212
$43.20
$48.00
Extend your best adventures into the after-hours. Easily install a 10" light bar onto your Front Runner roof rack using the 10" LED Light Bar VX250-FL Mounting Bracket.
A single bracket that secures the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to the Front Runner Roof Rack.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack.
Side guards protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Works with Roof Rack Power Point (sold separately).
Fitment guide and installation hardware included.
Consists of:1 x 10" Osram Light BracketInstallation HardwareFitting Instructions Materials used:Black powder coated steelProduct Dimensions:384mm (15.1") L x 67mm (2.6) W x 44mm (1.7") HWeight:0.47kg (1lbs)
Front Runner
FRONT RUNNER 10 Led Light Bar Vx250-Sp / 12V/ 24V / Flood Beam & Mounting Bracket - RRAC227
$157.50
$175.00
Don’t let darkness throw shade on your adventures. Keep exploring after nightfall with the 10" LED Light Bar. The high-performance LEDs with OSRAM technology, throw 1500 lumens over 37m. It features an intelligent reflector design that diverts the light from the LEDs so that oncoming traffic is not directly exposed to the light; as well as an additional yellow cover, that won’t attract insects to your campsite.
The high-performance LEDs, with OSRAM technology, reach a distance of 37m and deliver 1500 lumens.
The 3000 Kelvin intensity is distributed as a flood beam pattern.
The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
Perfect to light up your campground, this Light Bar with the additional yellow cover, also won’t attract pesky insects to your site.
The integrated driver and thermal management system measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan.
Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
The 12V/24V LED lightbar is ECE-compliant and versatile in application and is not limited to automotive use only.
Individual installation is possible due to the Double ECE certification (Double ECE-Certification: R112).
The Light Bar is approved according to ECE regulations and may therefore be installed and operated on public roads. In addition to the ECE approval, individual special regulations and legislation of the countries must be observed.
Installs easily into the front, back or side profiles of your Slimline II Rack, or to the side of the Slimsport Rack with 10" LED Light Bar VX250-FL Mounting Bracket.
The mounting bracket includes side guards to protect the 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light from potential damage caused by flying rocks and other road debris.
Fitment guide and installation hardware included.
Note: When powering your light, ensure your power cord is installed into the light before plugging it into the power source. Disconnecting would need to be done from the power source then the light.
Front Runner
FRONT RUNNER 10" Led Light Bar - LIGH900
$117.00
$130.00
Brighten up the road ahead and extend your adventures into the later hours with the 10” LED Light Bar. The light bar is constructed for durability and designed for versatility, both mounted onto Front Runner roof racks and for other off-vehicle uses.
Six high-performance LEDs provide better visibility with 2520 raw lumen and 6000 kelvin color.
Provides 120 degree flood beam pattern for close but wide range illumination immediately surrounding the vehicle.
This auxiliary light is equipped with a robust polycarbonate lens set in a die cast aluminum housing.
The 12V/24V LED Light Bar is versatile in application and is not limited to automotive use only.
Special regulations and legislation within each country should be taken into consideration before use.
Expected LED life of 30,000 hours.
Secures to your Front Runner roof rack with the LED 10inch Light Bar Bracket.
Consists of:1 x 10" Light Bar1 x Bracket Set
Materials used:Diecast aluminum housingPolycarbonate lensZinc alloy brackets
Product Dimensions:Light Bar:270mm (10.6") L x 58mm (2.3") W x 56mm (2.2") H
Light Bar with supplied bracket:270mm (10.6") L x 58mm (2.3") W x 70mm (2.8") H
Weight:17.4 kg (38.4lbs)
Special Notes:6pcs*5w high intensity CREE LEDSPower Consumption: 30WOperating Voltage: 10-30 DCWaterproof rate: IP 67Raw Lumen: 2520lmEffective lumen: 1740lmCurrent draw:12V/2.40A；24V/1.12ALife span:30000HColor Temperature: 6000K
Front Runner
FRONT RUNNER 10" Led Light Cover / Yellow - LIGH217
$31.50
$35.00
This Yellow Light Cover by OSRAM clips onto your Front Runner 10” LED Light Bar as needed for campsites or off-road driving. Filtering the LED light to yellow can help reduce the intensity of your Light Bar while driving, or even create a warmer atmosphere for campsites that attracts less bugs.
Easily clips onto the Front Runner 10" LED Light Bar VX250-FL / 12V/ 24V / Flood Light to change the light color from white to yellow
Made with robust polycarbonate plastic to endure under the harshest conditions
The yellow light creates a cozy atmosphere and attracts less bugs when relaxing at a campsite or off the beaten path
Consists of:1 x 10" LED Light Cover / Yellow
Materials used:Polycarbonate plastic
Product Dimensions:252mm (9.9") L x 39mm W (1.5") x 62mm (2.4") H
Weight:50g (1.8oz)
Front Runner
FRONT RUNNER 1165Mm Slat Add-On Kit - RRSAA1165
$98.10
$109.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II rack tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1165mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
RRSAA1165 - 1165mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1165 - 1165mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.57kg (3.46lbs)Shipping Dimensions:Width: 110mm (4")Length: 1170mm (46")Height: 70mm (3")Shipping Weight:Weight: 1.93kg (4lbs)
Front Runner
FRONT RUNNER 1255Mm Slat Add-On Kit - RRSAD1255
$101.70
$113.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1255mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
RRSAD1255 - 1255mm Slat Add-On KitConsisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1255 - 1255mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.69kg (3.73lbs)Shipping Dimensions:Width: 110mm (4")Length: 1260mm (50")Height: 70mm (3")Shipping Weight:Weight: 2.07kg (5lbs)
Front Runner
FRONT RUNNER 1345Mm Slat Add-On Kit - RRSAG1345
$110.70
$123.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1345mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1345 - 1345mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.82kg (4.01lbs)Shipping Dimensions:Width: 110mm (4")Length: 1350mm (53")Height: 70mm (3")Shipping Weight:Weight: 2.17kg (5lbs)
Front Runner
FRONT RUNNER 1425Mm Slat Add-On Kit - RRSAJ1425
$116.10
$129.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts to secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1425mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1425 - 1425mm SlatMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 1.93kg (4.25lbs)Shipping Dimensions:Width: 110mm (4")Length: 1430mm (56")Height: 70mm (3")Shipping Weight:Weight: 2.26kg (5lbs)
Front Runner
FRONT RUNNER 1475Mm Slat Add-On Kit - RRSAM1475
$119.70
$133.00
More slats for more adventure. Add slats to customize your existing Front Runner Rack Tray. Create additional mounting points, a solid tray surface.
Transform your Slimline II Rack Tray into a semi-solid, or solid surface; for sleeping, sitting, additional support and / or extra mounting points.
Includes Additional Tray Slat Bolts secure extra slat to your Slimline II Rack Tray.
This slat will work with any Front Runner Slimline II Rack that is 1475mm wide.
Can also be used to build a custom Load Bar Kit, or as a replacement slat.
Features T-slots on both the top and bottom faces.
A slat's sliding nut T-slot allow for quick fitting and removal of a variety of accessories and equipment.
Made from the same black powder coated aluminum as all Front Runner Racks.
Consisting of:1x RRAC045 - Additional Tray Slat Bolts1x RRSS1475 - 1475mm Slat
Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2kg (4.41lbs)Shipping Dimensions:Width: 110mm (4")Length: 1480mm (58")Height: 70mm (3")Shipping Weight:Weight: 2.36kg (5lbs)
Rhino-Rack
RHINO-RACK Vortex Complete Roof Rack Bundle For Byd Shark 6 - RX100-VA137B-LORD
$499.00
Conquer any adventure with the Rhino-Rack Vortex Complete Roof Rack Bundle for BYD Shark 6 - your professional solution for superior cargo carrying, aerodynamic performance, and reliability. Designed for adventurers, tradies, and weekend warriors, this proven system delivers strength, style, and security perfectly matched to your BYD Shark 6.
WHAT'S INCLUDED?
2X Rhino-Rack Vortex Bars (Black 1375mm) - aerodynamic design with VGS rubber strip
RX100 Leg System (x4) - 'Overland Tough' construction for BYD Shark 6 raised rails
VGS Rubber Strip - reduces wind drag and noise
Security Hardware - theft protection included
End Caps - complete professional finish
KEY BENEFITS
Aerodynamic Vortex design minimizes wind noise
'Overland Tough' construction for maximum durability
VGS rubber strip provides roof protection and noise reduction
Complete security hardware protects against theft
Seamless vehicle integration with sleek appearance
INSTALLATION OPTIONS
Choose DIY installation with Rhino-Rack's comprehensive step-by-step guide, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4X4 expertise, we ensure perfect fitment and optimal performance for your specific vehicle.
Ready to upgrade your BYD Shark 6's roof carrying capacity? Contact TJM Northern Beaches today.
Rhino-Rack RX100
The Rhino-Rack RX100 roof rack system is designed specifically for use with roofs that feature raised rails. Built 'Overland Tough' with rugged good looks and vigorously tested to meet the needs of any adventurer, tradie or weekend warrior.
The system suits a wide range of activities and comes with security hardware to protect your racks against theft. The RX leg provides a seamless transition between product and vehicle, for a sleek look that doesn't compromise functionality. The system comes with a comprehensive step-by-step installation guide, for adventurers who choose to self-install.
100% load capacity in all conditions
System rated to 100kg/220lbs* or vehicle manufacturer’s roof load limit. Know your limits, visit www.rhinorack.com/loadrating.
Quick and easy installation and compatible with Rhino-Rack Vortex™ Bars and Pioneer™ Platforms
City Crash and durability tested by independent labs making it suitable for off-road use
Easy access to Vortex™ Bar channel for quick accessory installation
KEY BENEFITS
Package length: 500 mm
Package width: 140 mm
Package height: 90 mm
Warranty: 5 Years
Country of Origin: Australia
Rhino-Rack Vortex Bars
The Rhino-Rack Vortex bars can be purchased in black or silver and are cut to 7 different predefined lengths to suit different vehicles. All bars include the VGS rubber strip which has been designed to reduce wind drag and noise as well as providing added protection for your roof racks and load. All bars include end caps.
Vortex Bars available to replace your current bars (sold individually)
Bars come in black and silver colour options
Bars are cut to predefined lengths and are priced accordingly
All Vortex bars come with end caps
All Vortex Bars come with the VGS strip
KEY BENEFITS
Package length: 1440 mm
Package width: 90 mm
Package height: 50 mm
Warranty: 5 Years
Country of Origin: Australia
Lightforce
LIGHTFORCE Beast 230Mm Clear Spot Filter- F230BEASTSC
$41.40
$46.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE Beast Led Driving Light Cover (Black)-F230BEASTBC
$41.40
$46.00
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The black covers add even more protection over the moulded Beast lens and the bezel from road debris and impacts. It is also ideal for those who like a modern look when wanting to promote the “Lightforce” Driving Light brand.
Specifications
Colour: Black
Beam Pattern: N/A Cover only
Size: 230mm
Material: Polycarbonate
*Do not operate lights with black cover fitted.
