AUDISON Prima Line - 1" Tweeter And Crossover Component -...
$189.99
The AP 1 tweeter features a 26 mm diameter emission diaphragm, an acoustic lens designed to compensate for the frequency response within the 10kHz 13kHz range, a Neodymium REN magnet and extremely small sized dedicated passive crossover.
Specs
Comp TweeterSize 26 mm (1")Power Handling Hi-pass filtered 3.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance 4Frequency Response 2k 20k HzSensitivity 93 dB/SplMagnet Neodymium
AUDISON Prima Line - 4" 4 Ohm Midbass Component -...
$189.99
The AP 4 midbass offers very extended frequency response, both in high and low frequencies, combined with high efficiency and features a 25 mm pure copper voice coil to ensure more balance in mid-high frequency ranges.
Technical Specs
Nominal diameter
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
120 W
Power Handling - Continuous
40 W
Sensitivity
91 dB
Frequency Response
80 ÷ 7,5k Hz
Voice Coil Ø
25 mm
Magnet size D x d x h
70 x 32 x 10 mm (2.75 x 1.26 x 0.39 in)
Xmax
1.8 mm (0.07 in)
Electric-acoustic Specs
Re
3.2 Ohm
Fs
125 Hz
Le
0.16 mH
Vas
1.5 l (0.053 ft)
Mms
5 g (0.176 oz)
Cms
0.3 mm/N
BL
3.4 T•m
Qts
1
Qes
1,2
Qms
7.6
General
Weight
0.4 kg
Dimensions
Dimension A
103 mm (4.06 in)
Dimension A3
130 mm
Dimension B
93 mm (3.66 in)
Dimension C
43 mm (1.69 in)
Dimension D
41 mm (1.61 in)
AUDISON Prima Line - 5" 4 Ohm Woofer Component -...
$189.99
AP 5 features a 32 mm pure copper voice coil, for high power handling and outstanding low-frequency control. All the woofers don't employ any filter, to maximize efficiency: the dome profile has been optimized with Klippel Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity.
Technical Specs
Nominal diameter
130 mm (5 in)
Impedance
4 Ohm
Power Handling - Peak
150 W
Power Handling - Continuous
50 W
Sensitivity
93 dB
Frequency Response
70 ÷ 5k Hz
Voice Coil Ø
32 mm
Magnet size D x d x h
85 x 40 x 13 mm
Xmax
2 mm (0.08 in)
Electric-acoustic Specs
Re
3.1 Ohm
Fs
90 Hz
Le
0.25 mH
Vas
4 l (0.141 ft)
Mms
9 g (0.317 oz)
Cms
0.34 mm/N
BL
4.6 T•m
Qts
0.68
Qes
0,74
Qms
8
General
Weight
0.65 kg
Dimensions
Dimension A
130 mm (5.12 in)
Dimension A3
150 mm
Dimension B
119 mm (4.69 in)
Dimension C
51.5 mm (2.03 in)
Dimension D
48.5 mm (1.91 in)
AUDISON Prima Line - 6.5" Woofer Component Pair (Ap 6.5)
$189.99
AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don't employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R & amp;D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity.
Technical Specs
Nominal diameter
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
210 W
Power Handling - Continuous
70 W
Sensitivity
93.5 dB
Frequency Response
60 ÷ 5k Hz
Voice Coil Ø
32 mm
Magnet size D x d x h
85 x 40 x 15 mm (3.35 x 1.57 x 0.59 in)
Xmax
2.5 mm (0.1 in)
Electric-acoustic Specs
Re
3.1 Ohm
Fs
80 Hz
Le
0.23 mH
Vas
7.6 l (0.268 ft)
Mms
12 g (0.423 oz)
Cms
0.31 mm/N
BL
4.7 T•m
Qts
0.7
Qes
0,8
Qms
4.7
General
Weight
0.78 kg
Dimensions
Dimension A
165 mm (6.5 in)
Dimension B
141 mm (5.55 in)
Dimension C
60 mm (2.36 in)
Dimension D
56 mm (2.2 in)
AUDISON Prima Line - Ap Bit Automatic Speaker Presence (Asp)
$134.99
AUDISON AP BIT - Automatic Speaker Presence
AP bit Automatic speaker presence adapter
Resistance for OEM radios/amplifiers in combination with AP bit processors
Usually used on the rear channels when the signal level can not be set
In order to solve the problem associated with OEM amplifiers that feature signal interruption, shutting down when a proper speaker “load” is not present as often found in aftermarket integration, the Prima amplifiers feature ASP (Automatic Speaker Presence). Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the hea
AUDISON Prima Line - Oem Harness (Apbmw Biamp1)
$189.99
This Plug & Play harness provides the ability to bi-amplify the front speakers of BMW and MINI vehicles that are not provided with an OEM amplifier. The APBMW BIAMP 1 is installed under the vehicle seat and is connected to the subwoofers. The T connection type allows the user to separately route the signal to the front mid-woofer housed in the car door and to the sub underneath the seat, without the need to cut the OEM cables. The cable is 450 cm long to reach the vehicle boot, where the Audison Prima AP bit amplifier is installed. The package contains a pair of cables, one for the left channel and one for the right channel.
AUDISON Prima Line - Oem Speaker Spacer (Apbmw A4E)
$189.99
Specially developed to fit the midrange and coaxials on BMW models equipped with non-standard fixings.
AUDISON Prima Line - Oem T-Harness (Ap T - H...
$144.99
PRIMA T-HARNESS BMW
T-Harness “DCC” is the Plug&Play solution for BMW to integrate Audison Prima with the factory car audio system. The battery positive is taken from the head unit without the need of reaching the engine compartment thanks to the DCC* solution.
*The DCC solution, (Direct Cockpit Current) can be used combined with the AP bit amplifiers’ feature which controls the amplifier absorption peaks, protecting the car power supply system.
Features
Designed specifically for your vehicle
For maximum OEM integration.
Connection to the AP Extension cable through ISO connectors
Possibility to supply power to the amplifier via the direct cockpit current system
Without the need of routing the cable through the engine compartment (with Audison Prima DCC solution).
ACC wire to re-launch ignition key signal to turn on / off an external device*
*In those vehicles featuring ignition key connection wire (ACC wire), see compatibility list
AUDISON Prima Line - Speaker Output Harness (Ap Spk Out...
$114.99
Audison AP SPK OUT 8.9 - PPRIMA Series 8-Channel, Speaker Output extension cable Plug & Play for AP8.9 bit
We are a Audison authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
• Audison Prima AP SPK Out 8.9
Plug&Play Connector
AP SPK OUT 8.9 cable are dedicated to the connection of the AP8.9 bit amplifier with the input/output Extension cable. The Plug&Play connectors with circle terminals are numbered (“CH1 +”, CH1 -“, etc…) for a foolproof connection. There is no need to solder any cable.
AUDISON Voce Line - 2 Way Crossover Box (Avcx 2W...
$174.99
Audison AV CX 2W MB VOCE Series 2-Way Crossover - Tweeter + Woofer (Pair)Especially designed for the AV K5 and AV K6 two-way complete systems, shapes their acoustic response to achieve a consistent, harmonious sound in any vehicle, also offering the acoustic controls necessary to achieve the best balance according to one’s own taste.
BLACKDEATH 6" Midrange Driver Speaker - 175 Watts-BDPRO6M-V9
$149.99
The VIBE BlackDeath Pro-8 8" Pro Audio Car Speaker is built for extreme SPL performance, loud output, and high-efficiency sound, making it perfect for competition builds and high-output car audio systems. Developed using professional PA speaker technology, this 8 inch woofer delivers powerful mid-bass, sharp clarity, and aggressive volume for serious audio enthusiasts.
Engineered with a lightweight semi-pressed paper cone, this speaker achieves high sensitivity and reduced moving mass for maximum output with minimal power. The dual roll cloth surround provides precise cone control and fast response, delivering tight bass and clear midrange even at high volume levels.
The BlackHole dustcap increases effective cone area to maximise sound pressure levels, producing loud, punchy, and dynamic sound. Whether you're upgrading your car speaker system or building a competition audio setup, the BlackDeath Pro-8 delivers powerful performance, durability, and reliability.
Specifications
Speaker Type: Pro Audio Component Woofer
Speaker Size: 8" (203mm)
Peak Power: 525W
RMS Power: 175W (Minimum Input 75W RMS)
Sensitivity: 97dB
Frequency Response: 65Hz – 20kHz
Impedance: 4 Ohm
Mounting Depth: 53mm (2.1")
Mounting Diameter: 141mm (5.6")
Voice Coil Diameter: 38mm (2")
Magnet Weight: 34 oz
Grille: Included
Unit: Sold as Single Speaker
BLACKDEATH 600 Watts 8" Midrange Speaker-BDPRO8M-V1
$179.99
The VIBE BlackDeath Pro-8 8" Pro Audio Car Speaker is built for extreme sound performance, delivering high SPL output, aggressive mid-bass, and competition-level volume. Designed using professional PA speaker technology, this 8 inch woofer is ideal for loud car audio systems, SPL builds, and enthusiasts who demand powerful and clear sound at high volumes.
Engineered for maximum efficiency, the semi-pressed paper cone provides high sensitivity with low moving mass, allowing the speaker to produce incredibly loud output with minimal power. The dual roll cloth surround ensures fast and precise cone control, delivering tight bass response and strong midrange clarity even under heavy load.
Featuring the signature BlackHole dustcap, this speaker increases effective cone area to maximise sound pressure levels, producing extreme volume with clarity and control. Perfect for competition setups, custom builds, or upgrading your car speaker system, the BlackDeath Pro-8 offers durability, performance, and unmatched output.
Specifications
Speaker Type: Pro Audio Component Woofer
Speaker Size: 8" (203mm)
Peak Power: 600W
RMS Power: 200W
Minimum Input: 100W
Sensitivity: 93 dB
Frequency Response: 65 Hz – 7.5 kHz
Impedance: 4 Ohm
Mounting Depth: 85mm (3.4")
Mounting Diameter: 185mm (7.3")
Voice Coil Diameter: 44mm (1.7")
Magnet Weight: 40 oz
Unit: Sold as Single Speaker
BLACKDEATH 750 Watts 10" Midrange Speaker-BDPRO10W-V1
$199.99
The VIBE BlackDeath Pro-10W 10" Pro Audio Car Speaker is engineered for extreme sound pressure levels, making it the ideal choice for competition car audio builds and high-output sound systems. Designed using professional PA speaker technology, this 10 inch woofer delivers powerful mid-bass, high sensitivity, and incredibly loud, aggressive sound performance.
Built for serious audio enthusiasts, the Pro-10W features a lightweight semi-pressed paper cone that increases efficiency while reducing moving mass for maximum output. The dual roll cloth surround ensures precise cone control and fast response, producing tight bass and clear mid-range even at high volumes.
The signature BlackHole dustcap increases effective cone area to maximise SPL, allowing this speaker to produce extreme volume levels with clarity and control. Whether you're building a loud car speaker system, upgrading your setup, or competing in SPL events, the BlackDeath Pro-10W delivers unmatched performance and reliability.
Specifications
Speaker Type: Pro Audio Component Woofer
Speaker Size: 10" (254mm)
Peak Power: 750W
RMS Power: 250W
Minimum Input: 125W
Sensitivity: 94 dB
Frequency Response: 55 Hz – 3.5 kHz
Impedance: 4 Ohm
Mounting Depth: 106mm (4.2")
Mounting Diameter: 235mm (9.25")
Voice Coil Diameter: 50mm (2")
Magnet Weight: 44 oz
Unit: Sold as Single Speaker
CLEARVIEW Next Gen / Compact Indicator – Cat 6 –...
$95.00
Please note: Images may differ from the actual product. Please check all specifications carefully before purchasing. If you're unsure or have any questions, please contact our team on 1300 856 888 before ordering.The Clearview CAT-6 LED Indicator is designed to meet the requirements of ADR 6/00.If your current Compact or Next Gen Towing Mirror contains a Cat 5 Indicator, these can be retrofit.If you are needing Cat 6 indicators and have not purchased the Compact or Next Gen mirrors, contact us and we can organise a set of mirrors with the CAT 6 indicators already installed.
Contents : 1 x Clearview Multi-Signal Module
Specifications :
Cat 6
Placement : Left
Suits Next Gen Mirrors
CLEARVIEW Next Gen / Compact Indicator – Cat 6 –...
$95.00
Please note: Images may differ from the actual product. Please check all specifications carefully before purchasing. If you're unsure or have any questions, please contact our team on 1300 856 888 before ordering.The Clearview CAT-6 LED Indicator is designed to meet the requirements of ADR 6/00.If your current Compact or Next Gen Towing Mirror contains a Cat 5 Indicator, these can be retrofit.If you are needing Cat 6 indicators and have not purchased the Compact or Next Gen mirrors, contact us and we can organise a set of mirrors with the CAT 6 indicators already installed.
Contents : 1 x Clearview Multi-Signal Module
Specifications :
Cat 6
Placement : Left
Suits Next Gen Mirrors
DIRECTION Plus Tr+ Throttle Controller Suits Great Wall Ssangyong -...
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0505DP fits Great Wall Steed (2006-2022), V200 (2011-2014), V240 (2006-2021) and X240 (2006-2012) models and Ssangyong Musso 2.2lt Turbo Diesel 2022 model. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Cannon Haval And Amarok - TR0151DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0151DP fits Great Wall Cannon, Haval H1, H2, H2S, H4, H6, H7, H8, H9 and F7X; and Volkwagen Amarok models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
INSTALLATION
With an easy installation, the TR+ can be fitted to both diesel and petrol vehicles in less than 5 minutes!
The Direction-Plus™ TR+ Throttle Controller utilises all factory plugs so there is no cutting or rewiring necessary.
DIRECTION-PLUS Tr+ Throttle Controller Mitsubishi Pajero, Triton, Challenger - TR0609DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0609DP fits Pajero, Triton and Challenger models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Nissan Maximize Power - TR0801DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0801DP fits Nissan Patrol GU ZD30 (3.0L 4cyl) 2006-2018 models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
NOTE: This TR+ throttle controller model is only suited to common rail vehicles (CRD) due a changeover in 2006/07 where the throttles are completely different.
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Pajero Sport And Mitsubishi Triton -...
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0601DP fits Mitsubishi Pajero Sport and Triton models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Suits Ford And Mazda - TR0715DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0715DP fits Everest / Ranger / Raptor and BT-50 models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Toyota Unleash Power - TR0567DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0567DP fits:
Toyota FJ 1GR (2007-2017)
Hilux 1KD-FTV (2004-2015)
Hilux 1GR (2009-2015)
Land Cruiser 70 series 1VD-FTV (2007-2012)
Prado 120 1KD-FTV (2003-2009)
Prado 150 1GR (2010-2017)
The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST.
DIRECTION-PLUS Tr+ Throttle Controller Unit Isuzu, Mazda, Toyota - TR0830DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0830DP fits Holden Colorado (2008-2012), Rodeo (2007-2008); Isuzu D-Max (2012-2022) and MU-X (2013-2022) ; Mazda BT-50 (2020-2022) Toyota Hilux 1GD-FTV (2016-2022) 2GD-FTV (2018-2022), Fortuner 1GD-FTV (2016-2022), Landcruiser 70 (2007-2022), 200 series (2007-2022) and 300 series (2022), Prado 150 1GD-FTV (2015-2021) and 155 series 1GD-FTV (2015-2022) models.
The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Unit Navara D22 - TR0719DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0719DP fits:
Nissan Navara D22 YD25 (2.5L 4cyl) 2008-2015
The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Unit Suits Ldv - TR0221DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0221DP fits:
LDV T60 I4 (2.0L 4cyl) 2017-2022
LDV D90 Turbo MPFI (2.0L 4cyl) 2017-2022
The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Unit Suits Ranger - TR0833DP
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0833DP fits Ford Ranger WEAT / WLAT (2007-2011) models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
DIRECTION-PLUS Tr+ Throttle Controller Wrangler / Grand Cherokee () -...
$193.50
$215.00
The Direction-Plus™ TR+ Throttle Controller TR0985DP fits Jeep Wrangler & Grand Cherokee WK2 models. The TR+ unit is fixed to the driver’s dash, which allows easy access to adjust settings. This unit will increase throttle response by adjusting the signal sent to the vehicles ECU and eliminates throttle lag on accelerator, giving you instantly more power!
CUSTOMISABLE SETTINGS
The TR+ Throttle Controller has six driving modes, each with nine customised settings that gives the driver the ability to finely tune their vehicle’s accelerator to suit their personal driving preferences.
The TR+ has been designed to ensure a high quality product that is suited to your 4×4, with modes such as CRAWL and BEAST. (Check the Mode Selection on the pictures)
INSTALLATION
With an easy installation, the TR+ can be fitted to both diesel and petrol vehicles in less than 5 minutes!
The Direction-Plus™ TR+ Throttle Controller utilises all factory plugs so there is no cutting or rewiring necessary.
DIRECTION-PLUS Universal Provent Ultimate Catch Can - PV150DPK
$188.96
$209.95
Direction-Plus™ Universal ProVent® Ultimate Catch Can PV150DPK kit comes with Provent Element 150 + fittings. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
NOTE: This kit does not include brackets. If you need the same kit with brackets go to PV151DPK
Advantages of The Direction-Plus™ ProVent® Oil Separator PV150DPK Kit:
• Ultra-compact design• Up to 150 l/min blow-by gas• Equipped as standard with high-efficiency medium• Pressure regulation• Available with by-pass or pressure-relief valve• Suitable for use as an open or closed CCV• Use of two ProVent 150 in parallel possible• Protection against incorrect insertion of replacement element through symmetrical design• Check valve for oil return available as option (recommended)• Cover position adjustable in steps of 3 degrees
FATZ FABRICATION Coupling From Fatz Built Airbox To Factory/Safari Snorkel...
$165.00
GU Patrol 4″ High Flow Airbox
Our GU Patrol 4″ High flow Airbox is a versatile unit with great compatibility in many common set ups. With GU Patrol 4” inlet and outlet, supplied with our Fatz Built filter in your choice of either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, template for enlarging the hole through the inner guard and fitting instructions supplied with the box. The box incorporates a water trap and duck valve drain, to allow water to drain away from the filter when ingested through the snorkel. The box is compatible with dual batteries with no modification to the box or tray. Simply select your plumbing kit (sold separately) to allow fitment with many common Engine combinations such as TD42, ZD30, RD28, LS1-3 etc. Not compatible with TB48 or TB45 without modifications. With an increase in flow from 410CFM with the factory box to Over 850CFM* with our High Flow Airbox, the improvements will be obvious. Supplied in all cases with filter, template for guard hole enlargement, clear lid, fasteners and instructions to fit out.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Dobinson 3.5"I.D Ram Head (Secures To Tube With...
$155.00
Safari 3.5″ Ram head.
3.5″″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
FATZ FABRICATION Dobinson 3.5"I.D Ram Head (Secures To Tube With...
$95.00
3.5″ Dobinson Ram Head. Compatible with all Fatz Built, Ram head snorkels.
3.5″ Dobinson Ram Head, suitable for use with all Fatz Built 4″ Ram head Snorkels. Slides into the top of the snorkel opening and secures with four stainless steel screws around the perimeter.
FATZ FABRICATION Gu Patrol Plumbing Kit. Suit Fatz 4" Airbox...
$180.00
With installation of our Fatz Built Airbox in your LS converted GU Plumbing Kit, there is the need to exchange the inlet plumbing to the Throttle body. For a pain free kit, supplying what you need, add this plumbing kit to your cart to ensure you have what you need to complete the install. Kit only compatible with 4″ throttle bodies, and use with Thermo fans on the radiator. Engine fans will need the have plumbing customised to fit, due to the space available. Compatible with NA LS application only. Supercharged application will require different plumbing to suit. MAF inclusion, can be optioned if retaining the MAF sensor (Suit 4″ OD MAFS).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Patrol Plumbing Kit. Suit Fatz 4" Airbox...
$180.00
With installation of our Fatz Built Airbox in your LS converted GU Plumbing Kit, there is the need to exchange the inlet plumbing to the Throttle body. For a pain free kit, supplying what you need, add this plumbing kit to your cart to ensure you have what you need to complete the install. Kit only compatible with 4″ throttle bodies, and use with Thermo fans on the radiator. Engine fans will need the have plumbing customised to fit, due to the space available. Compatible with NA LS application only. Supercharged application will require different plumbing to suit. MAF inclusion, can be optioned if retaining the MAF sensor (Suit 4″ OD MAFS).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N80 Hilux Catch Can Bracket. Compatible With Provent...
$100.00
N80 (GUN) Hilux Catch Can Bracket
Gearing up for a clean catch: Introducing the N80 Catch Can Bracket for N80 Airbox-equipped Hiluxes
Attention, automatic Hilux enthusiasts! Upgrade your engine protection with our N80 Catch Can Bracket, specifically designed to seamlessly integrate with your Fatz Built N80 Airbox. Say goodbye to compatibility headaches and hello to a clean, secure installation for your Provent or HPD Catch Can.
Gone are the days of struggling with off-the-shelf brackets that clash with the sleek lines of your N80 Airbox. We’ve engineered this bracket to be the perfect companion, offering a hassle-free mounting solution that won’t compromise your engine bay aesthetics.
Crafted from sturdy 3mm 304-grade stainless steel, this bracket is built to last. Professional TIG welding ensures a robust and reliable platform for your Provent or HPD Catch Can. No more rattling or vibrations, just pure performance and peace of mind.
With the N80 Catch Can Bracket, you can:
Protect your engine: Capture harmful blow-by gases and oil vapor before they contaminate your intake system, boosting engine health and longevity.
Maintain a clean engine bay: The sleek design and precise fit keep your catch can neatly tucked away, enhancing the visual appeal of your Hilux.
Enjoy effortless installation: Say goodbye to drilling and modifications. The N80 Catch Can Bracket bolts directly to existing mounting points, making installation a breeze.
Invest in your Hilux with theCatch Can Bracket. It’s the perfect blend of functionality, aesthetics, and ease of use, ensuring your engine runs clean and your ride looks sharp. So ditch the compatibility headaches and upgrade to a seamless catch can solution that complements your Airbox.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Safari 4" Id Ram Head (Clamps Over Outside...
$155.00
Safari 4″ Ram head.
4″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Safari 4" Id Ram Head (Clamps Over Outside...
$155.00
Safari 4″ Ram head.
4″ Internal diameter ram head for use with all Fatz Built Safari 4″ Ram Head snorkels. Securing over the top pf the 4″ snorkel to allow maximum flow through the entire surface area of the snorkel. With slotted cut outs on the rear of the head the Safari 4″ Ram Head also offers great water dispersion at the entry point.
FATZ FABRICATION Vdj70 Airbox Filter Bracket. Required For Fuel Master...
$70.00
VDJ 70 Series Fuel Filter Bracket
A common addition to the engine bay on VDJ 70 series is an additional fuel filter. These are typically mounted behind the factory Airbox where our Airbox protrudes to. We have developed our fuel filter mounting bracket to mount to the Reservoir mounting location on the back of our Airbox, this enables you to retain your filter in a similar location and not require additional modification when fitting our Airbox. Made in 3mm Stainless steel. This will complement your Airbox fitment with a functional feature in your engine bay.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Specific Battery Hold Down Clamp. 3Mm Stainless...
$30.00
3mm Stainless Steel Battery Clamps
Looking to bling up your engine bay a little to match your other Fatz products? Our Stainless Steel Battery Hold Down brackets are the go for you. Our Generic Battery Hold Down Bracket suits flat top maintenance free batteries as well as batteries with raised port access. 185mm hole centres to be compatible with N70 sized batteries. Battery Hold Down brackets are made in 3mm stainless steel, With Specific brackets available for VDJ 70 series to mount to the guard mounting location and pick up on the rod on the engine side of the battery.
FOCAL "Y" Adapter Cable For Impulse 4.320 Iso Standard -IW-IMP-EXT150
$100.00
IW-IMP-EXT150 Impulse amp cable kit, facilitates quick install of Impulse amps to vehicles via ISO plugs
Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IMP EXTENSION I/O 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers.
Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.
Developed with twisted cables to effectively eliminate disturbance
Three different lengths to suit all vehicles
Cut-resistant protective shield
Great flexibility for the easiest possible installation
Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320
No soldering required
Length: 5ft (1,50m)
FOCAL 6.5" Speaker Coaxial Component Protective Grills Covers Only (Pair)...
$120.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 6.5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL 6.5” Grille Utopia M | -GRILLE 6WM 6.5” grille...
$135.00
Focal 6.5" Utopia M Speaker Driver Grille - GRILLE6.5
Protect your premium Utopia M speakers while maintaining their exceptional acoustic performance with the Focal 6.5" Utopia M Speaker Driver Grille. Designed specifically for compatible Focal Utopia M 6.5-inch speaker applications, this premium grille combines elegant styling with durable protection, making it the perfect finishing touch for high-end custom audio installations.
Manufactured using Focal's advanced chemical etching process and complemented by a precision CNC-milled aluminium ring, the grille reflects the distinctive design language of the Utopia M range. Its acoustically transparent construction helps protect the speaker driver from accidental damage without affecting sound quality, ensuring your system performs exactly as intended.
Whether you're completing a custom installation or adding extra protection to an existing Utopia M setup, this grille provides a refined OEM-style appearance while preserving the premium aesthetics of your audio system.
Key Features
Designed specifically for Focal Utopia M 6.5" speaker drivers
Developed and manufactured in France
Premium protection for high-end speaker installations
100% chemical-etched grille construction
CNC-milled aluminium trim ring
Acoustically transparent design
Maintains speaker performance and sound quality
Complements the Utopia M design language
Ideal for custom and OEM-style audio installations
Sold individually
Why Choose a Utopia M Speaker Grille?
Premium speaker systems deserve premium protection. The Focal Utopia M grille helps safeguard your speaker investment while preserving the clean, sophisticated appearance expected from a flagship audio system.
Its precision-engineered construction provides an ideal balance of durability, aesthetics, and acoustic transparency, allowing your speakers to perform at their best while remaining protected from everyday wear and accidental damage.
Benefits
Protects speaker cones from accidental damage
Maintains optimal acoustic performance
Enhances the appearance of custom audio installations
Matches the premium aesthetics of the Utopia M range
Durable aluminium construction
Suitable for OEM-style and custom installations
Specifications
Product Type: Speaker Driver Grille
Speaker Compatibility: Focal Utopia M 6.5" Speakers
Construction: Chemical-Etched Metal Grille
Trim Ring Material: CNC-Milled Aluminium
Acoustic Design: Acoustically Transparent
Installation Type: Speaker Protection Grille
Country of Design: France
Sold As: Individual Grille
More Information
Product Type
Speaker Driver Grille
Speaker Size Compatibility
6.5" (165mm)
Series Compatibility
Focal Utopia M
Construction Method
100% Chemical Etching
Trim Ring Material
CNC-Milled Aluminium
Acoustic Transparency
Yes
Installation Type
Protective Speaker Grille
Vehicle Compatibility
Universal Custom Installations
Country of Design
France
Sold As
Individual Unit
What's Included
1 x Focal 6.5" Utopia M Speaker Driver Grille
CNC-Milled Aluminium Trim Ring
Installation Components
FOCAL 8” Grille Utopia M | -GRILLE 8WM 8” grille...
$155.00
Focal 8WM Utopia M 8" Speaker Driver Grille - 8WM GRILLE
Designed specifically for Focal Utopia M 8-inch midrange speakers, the 8WM Grille combines premium protection with the distinctive styling of Focal's flagship Utopia M range. Engineered for seamless integration into high-end custom audio installations, this grille preserves speaker performance while adding a refined finishing touch to your vehicle's interior.
Manufactured using a 100% chemical etching process and complemented by a precision aluminium trim ring, the 8WM Grille incorporates the unique "M" profile that defines the Utopia M series. The result is an elegant, acoustically transparent grille that protects your speaker while maintaining the exceptional sound quality expected from a premium Focal system.
Whether you're completing a competition-grade audio build or a premium OEM-style installation, the 8WM Grille provides the ideal combination of protection, aesthetics, and acoustic performance.
Key Features
Designed specifically for Focal Utopia M 8-inch midrange speakers
Premium speaker protection without compromising sound quality
100% chemical-etched grille construction
Precision aluminium trim ring
Distinctive Utopia M "M" profile design
Acoustically transparent construction
Seamless integration into custom installations
Enhances the appearance of premium audio systems
Developed to complement the Utopia M range
Sold individually
Why Choose the 8WM Grille?
Premium audio components deserve premium protection. The 8WM Utopia M Grille helps safeguard your speaker investment while preserving the sophisticated aesthetics and acoustic integrity of your audio system.
Its carefully engineered design allows sound to pass freely while protecting the speaker from accidental contact and damage, making it ideal for both show vehicles and daily-driven applications.
Benefits
Protects speaker cones from accidental damage
Maintains optimal acoustic performance
Matches the styling of the Utopia M range
Creates a clean, professional installation finish
Durable construction for long-term reliability
Ideal for custom and OEM-style installations
Specifications
Product Type: Speaker Driver Grille
Speaker Compatibility: Focal Utopia M 8" Midrange Speakers
Construction: 100% Chemical-Etched Metal Grille
Trim Ring Material: Aluminium
Design Profile: Utopia M Signature "M" Profile
Acoustic Transparency: Yes
Installation Type: Protective Speaker Grille
Sold As: Individual Grille
More Information
Product Type
Speaker Driver Grille
Speaker Size Compatibility
8" (200mm)
Series Compatibility
Focal Utopia M
Construction Method
100% Chemical Etching
Trim Ring Material
Aluminium
Design Profile
Utopia M "M" Profile
Acoustic Transparency
Yes
Installation Type
Protective Speaker Grille
Vehicle Compatibility
Universal Custom Installations
Sold As
Individual Unit
What's Included
1 x Focal 8WM Utopia M 8" Speaker Driver Grille
Aluminium Trim Ring
Installation Components
FOCAL Aluminium/Magnesium Inverted Dome Tweeters - TWU1.5 tweeters (pair)
$125.00
Focal TWU1.5 Aluminium/Magnesium Inverted Dome Tweeters - TWU1.5
Enhance your vehicle's audio system with the Focal TWU1.5 Tweeters, a premium high-frequency upgrade designed to deliver exceptional clarity, detail, and accuracy. Developed and manufactured in France, these compact tweeters feature Focal's renowned aluminium/magnesium inverted dome technology, providing natural treble reproduction and an extended frequency response for a truly immersive listening experience.
Part of the acclaimed Focal Integration Series, the TWU1.5 tweeters are engineered for universal compatibility and custom installations. Whether you're upgrading an existing Focal system, enhancing factory speakers, or building a complete custom audio setup, these tweeters offer remarkable flexibility and outstanding acoustic performance.
With multiple mounting options and a compact design, the TWU1.5 allows seamless integration into virtually any vehicle while maintaining a clean OEM-style appearance. The result is wider sound dispersion, improved stereo imaging, and greater musical detail across every genre.
Key Features
Designed and developed in France
Aluminium/Magnesium inverted dome tweeter technology
Extended 4kHz – 21kHz frequency response
94dB sensitivity for excellent efficiency
Four mounting options for maximum installation flexibility
Natural, accurate, and detailed sound reproduction
Excellent stereo imaging and soundstage enhancement
Compatible with factory and aftermarket audio systems
Ideal for Focal Integration and Universal Series upgrades
Sold as a pair
Why Upgrade with TWU1.5 Tweeters?
Factory tweeters often lack the detail and precision needed to reproduce high frequencies accurately. The Focal TWU1.5 delivers cleaner vocals, sharper instrument detail, and a wider soundstage, helping reveal nuances in your music that standard speakers can miss.
Designed to integrate effortlessly into a variety of vehicle applications, these tweeters provide a significant improvement in overall system performance while maintaining tonal balance and listening comfort.
Flexible Mounting Options
Flush Mount Installation
Angled Surface Mount Installation
Flat Surface Mount Installation
Behind Factory Grille Integration
Benefits
Improved vocal clarity and detail
Extended high-frequency response
Enhanced stereo imaging and soundstage
Natural and balanced sound signature
Suitable for OEM and aftermarket systems
Simple integration into virtually any vehicle
Specifications
Product Type: Tweeters
Tweeter Design: Inverted Dome
Tweeter Material: Aluminium/Magnesium
RMS Power Handling: 15W RMS
Maximum Power Handling: 100W
Impedance: 4 Ohm
Sensitivity: 94dB
Frequency Response: 4kHz – 21kHz
Surround Material: Poron
Voice Coil Diameter: 0.8"
Mounting Type: Surface Mount
Grilles Included: Yes
Net Weight: 40g
More Information
Product Type
Tweeters
Series
Focal Integration
Tweeter Material
Aluminium/Magnesium
Tweeter Design
Inverted Dome
RMS Power
15W
Maximum Power
100W
Impedance
4 Ohm
Sensitivity
94dB
Frequency Response
4kHz - 21kHz
Surround Material
Poron
Voice Coil Diameter
0.8"
Mounting Type
Surface Mount
Grilles Included
Yes
Net Weight
40g
Vehicle Compatibility
Universal
Sold As
Pair
Country of Design
France
What's Included
2 x Focal TWU1.5 Tweeters
Surface Mount Hardware
Flush Mount Hardware
Installation Accessories
Protective Grilles
Installation Instructions
FOCAL Auditor Evo Series 4" 2-Way Car Speakers -ACX100
$175.00
FOCAL ACX 100AUDITOR EVO SERIES 4" 2-WAY CAR SPEAKERS
The benefit of Focal innovation
Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness.
The aim of Auditor EVO
Focal's goal is to improve the audio experience in any type of car, and these impressive ACX 100 4" coaxial speakers will easily outperform your factory speakers and bring the fun back to your drive time. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter, with its handsome black lacquered finish, broadcasts high-frequency details that put standard tweeter designs to shame. An integrated, high-fidelity crossover ensures that the woofer handles only the lower frequencies and the tweeter only handles the highs, giving you a smooth sound overall.
Ready to ride
A polypropylene woofer cone and butyl rubber surround help these speakers live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound.
Product highlights:
2-way car speakers (pair)
4" polypropylene woofer cone with butyl rubber surround
Mylar inverted dome tweeter
rigid steel basket
mesh/ABS mesh grilles included
handles up to 30 watts RMS (60 watts peak)
frequency response: 80-21,000 Hz
sensitivity: 88 dB
impedance: 4 ohms
mounting depth: 1-15/16"
warranty: 1 year
MFR # ACX100
Item # 091ACX100
Features & specs
General
Speaker Size
4
Design
2-way
Tweeter Design
Inverted Dome
Impedance (Ohms)
4
Tweeter Composition
Mylar
Woofer Composition
Polypropylene
Woofer Surround
Butyl Rubber
Parts Warranty
1 Year
Labor Warranty
1 Year
Specifications
Sensitivity (1W at 1 meter)
N/A
Sensitivity at 2.83 volts
88
Frequency Response
80 - 21k Hz
Minimum RMS Wattage
---
Maximum RMS Wattage
30
Peak Power Handling (Watts)
60
Top-mount Depth (Inches)
1 15/16
Bottom-mount Depth (Inches)
2 1/8
Cutout Diameter or Length (inches)
3 11/16
Mounting Height (Inches)
0.443
Frame Width
4.027
Frame Length
4.027
What's in the box:
Two 2-way speakers
2 Grilles
Focal owner's manual
2 Grille mounting rings
Eight 1" Screws
8 Speed clips
Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)
FOCAL Gr 5 Km - K2 Power M Line Grille...
$100.00
THE ESSENTIAL ACCESSORY
SPEAKER DRIVER GRILLE
This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.
FOCAL Harness Iso Cable Harness -IW-FORDV2-YISO
$100.00
The Focal Inside I IW FORD Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Ford original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : Ford vehicles from 2005 to 2021
FOCAL Harness Iso Cable Harness -IW-TOY-YISO
$100.00
FOCAL IW IMP EXT 150 "Y" ADAPTER CABLE FOR FOCAL IMPULSE 4.320 ISO STANDARD
Compatible with the IMPULSE 4.320 compact 4-channel digital amplifier, the IW IMP EXT 150 extension cables with Plug & Play connections offer total installation freedom as they can connect each amplifier channel to one of the speaker drivers.
Input/output extension: ‘Input’ to send the audio signal from the main unit to the amplifier and ‘output’ to send the signal leaving the amplifier to the original audio system.
Developed with Twisted Cables to Effectively Eliminate Disturbance
Three Different Lengths to Suit All Vehicles
Cut-resistant Protective Shield
Great Flexibility for the Easiest Possible Installation
Double In/Out connector to also receive the amplified signal from the IMPULSE 4.320
No Soldering Required
Length: 5 ft (1.50m)
DESIGNED IN FRANCE
For over 40 years, Focal has been designing and manufacturing free-standing and in-wall/in-ceiling loudspeakers for the home, Home Cinema systems, speaker drivers for cars, monitors for recording studios, open-back and closed-back Hi-Fi headphones, as well as audio solutions for boats and yachts. Based in Saint-Étienne in France, Focal has positioned itself as a global leader in its field, thanks to its constant commitment to new technologies and innovations.
FOCAL Harness Iso Cable Harness -IW-TOYV2-YISO
$100.00
The Focal Inside I IW TOY Y-ISO HARNESS V2 car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Toyota original car radio and of Focal Inside extension cables.
Designed specifically for your vehicle
Quick and easy Plug and Play installation
Direct link from the amplifier to your original car radio
Connection to the extension cable via ISO connectors
No soldering required
Length: 1 foot (0.3m)
Global vehicle compatibility : Toyota vehicles from 2021
FOCAL Harness Iso Harness Cable -IW-VW-YISO
$120.00
ISO harness cable
The Focal Inside VOLKSWAGEN Y-ISO HARNESS car radio adapter cable is designed for the IMPULSE 4.320 four-channel digital amplifier. It allows connection to the original Volkswagen car radio and quick and easy connection of Focal Inside extension cables. Designed specifically for Volkswagen vehicles after 2005, this one-meter-long cable allows easy Plug & Play installation. Connection to the extension cable is via ISO connectors; no soldering is required.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
