AUDISON Car Audio Amplifiers and Speakers

The AV 12 D4 II brings the unmistakable VOCE II sound signature to the deepest frequencies, combining powerful output with absolute control and musicality. Designed for sealed enclosures, it delivers precise, distortion-free bass in compact spaces—making it an ideal choice for high-performance in-car installations. At its core is a dual 4-ohm voice coil architecture, offering exceptional flexibility in wiring configurations. The 1.5-inch Copper-Clad Aluminum Wire voice coil, coupled with an FEM-optimized magnetic assembly, ensures efficient energy transfer and superior thermal management during extended listening sessions. The subwoofer features an extended-profile dust cap and Radial Reinforcement Framework (R.R.F.) to enhance cone stability and minimize deformation during high excursion. The rugged die-cast aluminum basket integrates smart cable routing hooks, while the spring-loaded terminals allow secure connections with high-current 8 AWG cables. Whether used in a single-sub or multi-driver setup, the AV 12 D4 II guarantees low-end performance that is tight, controlled and deeply engaging—faithful to the Audison philosophy of blending acoustic excellence with refined Italian design.   Technical Specs Nominal diameter 300 mm (12 in) Impedance 4+4 Ohm Power Handling - Peak 1100 W Power Handling - Continuous 550 W Sensitivity 84.5 dB Frequency Response 25 - 400 Hz Voice Coil Ø 38.6 mm (1.5 in) Chassis Material ALUMINIUM Magnet Material FERRITE Magnet size D x d x h 156*60*34 mm (6.14*2.36*1.3 in) Voice Coil Material CCAW Former Material GLASS FIBER Cone Material POLYPROPYLENE Xmax 16.8 mm (0.66 in) Xmech 20 mm (0.79 in) Voice Coil Winding Height 37 mm (1.46 in) Gap Height 7 mm (0.28 in) Recommended Enclosure 21 l (0.742 ft) Recommended Tuning 45 Hz Ferrofluid No Electric-acoustic Specs D 539 cm² (83.545 in²) Re 1.8 Ohm Fs 23 Hz Le 1.8 mH Vas 63 l (2.225 ft) Mms 298 g (10.512 oz) Cms 0.15 mm/N BL 12.2 T•m Qts 0.5 Qes 0.5 Qms 6.2 Reference Efficiency 84.5 General Weight 6.6 kg Dimensions Dimension A 318.3 mm (12.53 in) Dimension B 282.9 mm (11.14 in) Dimension C 102.5 mm (4.04 in) Dimension D 88 mm (3.46 in) Dimension E 292.3 mm Dimension F 11.51 Dimension C1 109 mm Dimension C2 136.7 mm Centre to centre distance 302 mm Hole diameter 5.5 mm

5-Channel Amplifier The Audison Voce AV 5.1K, 1650 W (RMS) max, five channels: with its hybrid design, it is the specialist amplifier for front + rear + subwoofer or multi-amplified front + subwoofer systems. Its high-quality AB Class output stage provides two channels with 250 W (RMS), combined with another pair of A class pure audio channels rated at 75 W (RMS), perfect for active two-way front speaker systems. The D Class mono section provides 1000 W (RMS) for powerful subwoofer output.  AV 5.1k also allows you to replace the analog input board with the digital one (AV bit IN). Features: Hybrid design made up of two 75 W A Class channels, two 250 W AB Class channels, and one 1000 W D Class channel Hi-Res audio certification thanks to 4 ÷ 60k Hz bandwidth Specifications: Amplifier Tech Data Channels: 5 Class: AB-Class Hi Level Input: Yes Low Level Input: Yes Digital Input: No Power supply voltage / fuse:11 ÷ 15 VDC Idling current: 3 A Idling current when off: 0.02 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power: 110 A Remote OUT: 12 VDC – 50mA Remote IN: 7 ÷ 15 VDC – 1mA ART – Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable): Selectable Amplifier Stage Total Power RMS: 1650 W Minimum load impedance: 4Ω / 2Ω / 2ΩOutput Power (RMS) @14.4 VDC, 1% THD:5 Ch: 75 W x 2 (4Ω) + 140 W x 2 (4Ω) + 600 W x 1 (4Ω)5 Ch: 75 W x 2 (4Ω) + 140 W x 2 (4Ω) + 1000 W x 1 (2Ω)5 Ch: 75 W x 2 (4Ω) + 250 W x 2 (2Ω) + 1000 W x 1 (2Ω) Adjustable Crossover: Yes

AV due is a powerful stereo amplifier with the power supply section and final stage designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS). AMP (Amplifier Management Processor) constantly checks the operating status system and comm unicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isnâ„¢t available from the source. Amplifier Tech Data Channels 2 Class AB-Class Hi Level Input Yes Low Level Input Yes Digital Input Yes Power supply voltage / fuse 11 ÷ 15 VDC Idling current 1.7 A Idling current when off 0.02 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power 65 A Remote OUT 12 VDC - 50mA Remote IN 7 ÷ 15 VDC - 1mA ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) Selectable Amplifier Stage Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.04 % Bandwidth A (-3 dB, 2 VRMS, 4 Ω): 4 ÷ 60k Hz S/N ratio A (A weighted @ 1 V): 100 dBA Damping factor A (1kHz, 4 Ohms): 120 Input sensitivity Pre-In 0.3 ÷ 5 V RMS Pre In Impedance 15k Ω Input sensitivity Speaker-In 1.4 ÷ 24 V RMS Input impedance Speaker-In 5k Ω Total Power RMS 900 W Minimum load impedance 2Ω Output Power (RMS) @14.4 VDC, 1% THD • 2 Ch: 260 W x 2 (4Ω)• 2 Ch: 450 W x 2 (2Ω)• 1 Ch: 900 W x 1 (4Ω) Adjustable Crossover Yes CEA Specifications Output power @ 4Ω, 1% THD+N, 14.4 V Output power @ 4Ω, 1% THD+N, 14.4 V: 260 W x 2 Ch SN ratio (ref. 1W output) SN ratio (ref. 1 W output): 80 dBA Inputs Input Type Pre IN / Speakers IN Filters Outputs Pre OUT Full Range Filter Pass A (Full / Hi-Pass / Lo-Pass): 50 ÷ 5k Hz (2 range) @ 12 dB/Oct. Filter Pass B (Lo-Pass 24 dB mono): 50 ÷ 500 Hz @ 24 dB/Oct. Remote Sub Volume -50 ÷ 6) dB Other Fuse 60 A Weight 7.2 kg Dimensions Dimension A 470 mm Dimension B 399 mm Dimension C 220 mm Dimension D 198 mm Dimension E 58 mm

4-Channel Amplifier The Audison Voce AV quattro is a four-channel amplifier capable of working in four, three, or two-channel modes, and delivering a total power of 1700 W (RMS). It is designed to handle complex front/rear and multichannel system configurations.  The AMP (Amplifier Management Processor) constantly monitors the operating status of the operating system and communicates with the user through 4 different colored LEDs located on the top panel. ART (Automatic Remote Power On/Off) enables automatic power on/off when no remote signal is available from the source. Filters with cut off slope up to 24 dB/oct. allow for front-rear, front-sub or multi-amplified systems while always having an unfiltered signal available at the output for system expansion. Features: Hi-Res audio certification thanks to 4 ÷ 60k Hz bandwidth Four, three, or two-channel modes operation 4 x 200 W @ 2-ohm audiophile AB Class Built-in 24 dB/oct filters with bass-boost and subsonic Specifications: Amplifier Tech Data Channels: 4 Class: AB-Class Hi Level Input: Yes Low Level Input:Yes Digital Input: No Power supply voltage / fuse: 11 ÷ 15 VDC Idling current: 1.8 A Idling current when off: 0.02 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power: 55 A Remote OUT: 12 VDC – 50mA Remote IN: 7 ÷ 15 VDC – 1mA ART – Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable): Selectable Amplifier Stage Total Power RMS: 800 W Minimum load impedance: 2Ω Output Power (RMS) @14.4 VDC, 1% THD:4 Ch: 120 W x 4 (4Ω)4 Ch: 200 W x 4 (2Ω)4 Ch: 120 W x 2 (4Ω) + 200 W x 2 (2Ω)3 Ch: 120 W x 2 (4Ω) + 400 W x 1 (4Ω)3 Ch: 200 W x 2 (2Ω) + 400 W x 1 (4Ω)2 Ch: 400 W x 1 (4Ω) + 400 W x 1 (4Ω) Adjustable Crossover: Yes

AV uno is an amplifier featuring an innovative circuitry called POD (Power On Demand); it provides at the final stage in AB class a dynamic power that serves as a tracker to the signal to be amplified so as to increase efficiency and reduce the temperature. AV uno allows to combine the plus points, in terms of audio quality and robustness, of the AB Class traditional amplifiers with the efficiency of the D Class amplifiers. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source. AV uno is a mono amplifier designed to drive the subwoofer but also suitable for high power Dual Mono systems.

F4IN features 3.2 ÷ 32 VRMS to allow perfect integration into advanced higher voltage OEM systems. F4IN is compatible with: Audi A5/S5 2015 with B&O for subwoofer Audi Q5 with B&O for subwoofer Audi A6 4G with Bose for subwoofer Most BMWs are equipped with an H/K system for the subwoofer Porsche Cayenne 2018 with Bose for subwoofer Skoda Octavia 2022 with Canton for subwoofer Volvo FH12 with OEM subwoofer DVC 8+8 Ohm COMPATIBLE PRODUCTS AF M12,14bit  AF M8.14 bit  AF C8.14 bit  AF M5.11 Bit  AF C4 .10 bit 

Audison F2O - OPTICAL FORZA EXTENSION Accessories | Forza expansion board The F2O accessory is a digital input expansion card compatible with the new range of Audison AF bit amplifiers with integrated Dsp. The card fits into the designated external slot of the AF bit amplifier and adds an additional coaxial Add S/PDIF or a second Toslink S/PDIF input. The type of additional input can be selected using a switch on the card itself. If the coaxial S/PDIF input is selected, the coaxial input cable included in the card box can be used.

The Audison AFM/AFC CLK accessories have been specially developed for the Audison Forza Max/Compact amplifier series.It consists of a metal bracket with airflow slots and a cooling fan, designed for quick installation on the Audison Forza Max/Compact amplifiers.AFM/AFC CLK is highly recommended when installing the amplifier in very tight spaces with limited airflow to ensure optimal performance and durability in difficult conditions. Features: Compact Design: The robust metal housing of the AFM/AFC CLK fits perfectly into the Forza heatsink and ensures optimal airflow through strategically placed slots.  Quick Installation: The mounting is done via plastic nuts without any additional measures, so AFM/AFC CLK can be easily can be integrated into existing installations. The power harness with remote input prevents unwanted current draw when the system is turned off. Efficient cooling: AFM/AFC CLK is equipped with a low-noise and fast cooling fan. The built-in electronics monitors the heatsink temperature in real time via the integrated sensor, activates the fan at a certain threshold and controls its speed according to the power/heat dynamics. This ensures efficient operation and extends the life of the amplifier by preventing overheating.  

The Audison AFC CLK accessory is specifically engineered for the Audison Forza Compact amplifier line. It comprises a metal bracket equipped with air flow slots and a cooling fan, designed to be quickly installed onto the Audison Forza Compact amplifiers. AFC CLK is highly recommended when the amplifier is installed in very tight spaces with limited air circulation, ensuring optimal performance and longevity under challenging conditions.Specification Suitable Models: Designed for AFM Amplifiers & DSPs that measure 200 x 134mm DSP Models: AFC410, AFC8.14B Amplifier models: AFC4D Power supply voltage / fuse: 11 - 15 VDC/1A Operating power supply voltage: 6.5 - 17.5 VDC Idling current at max speed: 145mA @14.4V Standby current draw: 0.1uA Remote IN: 4 - 15 VDC (0.62 mA@ 14.4V) Weight: 0.265g  Features Compact design: the AFC CLK sturdy metal case footprint fits within Forza heatsink, ensuring optimal airflow through strategically placed slots. Quick Install: mounting is allowed through plastic nuts, without any additional operation, allowing AFC CLK to be easily added in existing installations. The power harness with remote in terminal prevents unwanted current draw when the system is off. Efficient Cooling:AFC CLK is equipped with low-noise and hi-speed cooling fan. The built-in electronics monitors in real-time the heatsink temperature through its integrated sensor, thus activating the fan at certain threshold and controlling its speed according to the power/heat dynamics. This ensures efficient operation and prolongs the lifespan of the amplifier by preventing overheating.

AF M8.14 bit boasts eight high-fidelity amplified channels 90W x 8 @4Ω, 140W x 8 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 280W x 4 @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections!*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven. NEXT-GENERATION TUNING CAPABILITIES FOR MAXIMUM CONTROL Audison’s completely-new bit Drive PC software can analyze, route, and correct the signal in completely new ways – now you can measure, mix, and finally tune the sound with one powerful tool! The new Graphical User Interface simplifies every control and function, integrating acoustic measurement, and ensuring efficient tuning and great sound! The Acoustic RTA is integrated into the equalizer graph, and is compatible with your USB microphone or sound card. The Final EQ function allows final equalization without damaging the delicate left/right frequency relationships. The six processed preamp outputs are in addition to the eight amplified channels, allowing Forza’s DSP section to manage a larger system easily. ADVANCED OEM INTEGRATION CAPABILITIES Forza’s eight analog inputs, plus an optical Toslink digital input, support total connectivity even with the most complex OEM systems. If more analog inputs are required, the optional F4IN expansion card adds four additional analog input channels! If a Coaxial SPDIF or a second Toslink SPDIF input is needed, the optional F2O expansion card can be used. Audison’s classic de-EQ process is joined by de-Time and de-Phase capabilities, enabling sound restoration in nearly every OEM system., The electrical signal analysis ensures proper integration and correction for each input and output channel. The built-in universal speaker simulation technology (USS) yields maximum compatibility with any OEM Source, without muting or instability.AF M8.14 bit includes a set of six high-quality cables supplied with a protective printed strip placed upstream of the Molex connectors to increase the resistance to torsion. Features Improved audio performance and power thanks to the latest-generation ADT (AudISON D-Class) technology Outstanding power-to-volume ratio up to 0.68 W RMS/cm³, reaching 82% efficiency Next-generation bit Drive software platform Hi-Res Audio compatibility, with extended bandwidth up to 40 kHz, enabled by DSP operation at 24-bit / 96 kHz Maximum versatility with bridging capability on each pair of power outputs Up to 14 output channels (8 amplified + 6 optional pre-outs) DSP-controlled to expand the system with additional amplifiers 8 high- / low-level inputs plus optical Toslink digital input for full integration with complex OEM systems Expansion card slot for an additional 4 analog inputs or 1 digital input Electrical signal analysis on each input channel for proper integration and correction Acoustic analysis via USB microphone, displaying the response graph directly in the equalizer for precise tuning Advanced signal routing options, allowing technicians to exceed the predefined system layouts in the Configuration Wizard

AF M5.11 bit boasts five high-fidelity amplified channels 100W x 4 + 400W @4Ω*, 150WP x 4 + 600W @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 200W x 2 + 400W @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections! Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven. Features Improved audio performance and power thanks to the latest-generation ADT (Audison D-Class) technology Outstanding power-to-volume ratio up to 0.68 W RMS/cm³, achieving 82% efficiency Next-generation bit Drive software platform Hi-Res Audio compatibility, with an extended frequency response up to 40 kHz, enabled by DSP operation at 24-bit / 96 kHz Maximum versatility with bridging capability on each pair of power outputs Up to 11 output channels (5 amplified + 6 optional pre-outs), DSP-controlled to expand the system with additional amplifiers 8 high- / low-level inputs, plus optical Toslink digital input, ensuring full integration with complex OEM systems Expansion card slot for an additional 4 analog inputs or 1 digital input Electrical signal analysis on each input channel for proper integration and correction Acoustic analysis via USB microphone, displaying the response graph directly in the equalizer for accurate tuning Advanced signal routing options, allowing technicians to exceed predefined system layouts in the Configuration Wizard

The AF M12.14 bit features twelve high-fidelity amplified channels, delivering60 W × 12 @ 4Ω* or 90 W × 12 @ 2Ω*, powered by the latest-generation Audison D-Class (ADT) technology. Higher switching frequencies, steeper filtering, and high-tolerance components provide sound quality that exceeds traditional Class D expectations—all within an ultra-compact design. Native DSP operation at 24-bit / 96 kHz extends the audio bandwidth up to 40 kHz, earning High-Resolution Audio certification. Bridging channel pairs delivers 180 W × 6 @ 4Ω*, ensuring flexible system configuration and powerful performance. Support for the Audison B-CON Absolute Volume function guarantees maximum bit depth even when using wireless audio sources. * Continuous RMS output power measured at 14.4 VDC, 1% THD, all channels driven. Features Improved audio performance and power thanks to the latest-generation ADT (Audison D-Class) technology Exceptional power-to-volume ratio up to 0.68 W RMS/cm³, achieving 82% efficiency Next-generation bit Drive software platform Hi-Res Audio compatibility, with an extended frequency response up to 40 kHz, enabled by DSP operation at 24-bit / 96 kHz Maximum versatility with bridging capability on each pair of power outputs Up to 14 output channels (12 amplified + 2 native pre-outs), DSP-controlled for system expansion 8 high- / low-level inputs, plus optical Toslink digital input, for seamless integration with complex OEM systems Expansion card slot supporting 4 additional analog inputs or 1 digital input Electrical signal analysis on each input channel for accurate system integration and correction Acoustic analysis via USB microphone, displaying the response curve directly in the equalizer for precise tuning Advanced signal routing options, allowing technicians to go beyond predefined system layouts in the Configuration Wizard

AF C8.14 bit boasts eight high-fidelity amplified channels 65W x 8 @4Ω*, 100W x 8 @2Ω*, with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 200W x 4 @4Ω*, guaranteeing flexible and powerful performance. Support for the Audison B-CON’s Absolute Volume function guarantees maximum bit depth, even with wireless connections!*Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven. Features Improved audio performance and power thanks to the latest-generation ADT (Audison D-Class) technology Exceptional power-to-volume ratio up to 0.68 W RMS/cm³, achieving 82% efficiency Next-generation bit Drive software platform Hi-Res Audio compatibility, with an extended frequency response up to 40 kHz, enabled by DSP operation at 24-bit / 96 kHz Maximum versatility with bridging capability on each pair of power outputs Up to 14 output channels (8 amplified + 6 optional pre-outs), DSP-controlled to expand the system with additional amplifiers 8 high- / low-level inputs, plus optical Toslink digital input, ensuring full integration with complex OEM systems Expansion card slot supporting 4 additional analog inputs or 1 digital input Electrical signal analysis on each input channel for proper system integration and correction Acoustic analysis via USB microphone, displaying the response graph directly in the equalizer for precise tuning and superior sound quality Advanced signal routing options, allowing technicians to go beyond predefined system layouts in the Configuration Wizard

Audison AFC410BIT Forza 600W 4-Channel Amplifier With 10-Ch DSP Key Features Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology Unbeatable power/volume ratio up to 0.68 W RMS/cm³ reaching 82% of efficiency Next-generation bit Drive software platform Hi-Res compatibility performance, with an extended audio band up to 40 kHz, made possible by and DSP working operation at 24 bit/96 kHz Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs Up to 10 output channels (4 amplified, 6 native pre-out outputs, 4 optional pre-outs) controlled by the DSP to expand the system with other amplifiers 8 high/low-level inputs (and an optical Toslink digital input) support total connectivity even with the most complex OEM systems Extension card slot (additional 4 analog or 1 digital inputs) Electrical signal analysis for each input channel ensures proper integration and correction Acoustic analysis (with your USB microphone) integrates the response graph into the equalizer display. This ensures efficient tuning and great sound! Advanced signal routing options allow the technician to go beyond the predefined system definitions in the Configuration Wizard Features Audiophile Sound You Expect From AudisonAF C4.10 bit boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω*, with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! This is combined with native DSP working at 24 bit/96 kHz, extending the audio band up to 40 kHz and earning the coveted High-Resolution certification. Bridging channel pairs results in 300 x 2 @4Ω, guaranteeing flexible and powerful performance. Support for the Audison B-Con’s Absolute Volume function guarantees maximum bit depth, even with wireless connections! Next-generation Tuning Capabilities For Maximum ControlAudison’s completely-new bit Drive PC software can analyze, route, and correct the signal in completely new ways – now you can measure, mix, and finally tune the sound with one powerful tool! The new Graphical User Interface simplifies every control and function, integrating acoustic measurement, and ensuring efficient tuning and great sound! The Acoustic RTA is integrated into the equalizer graph, and is compatible with your 16-bit USB microphone or sound card. The Final EQ function allows final equalization without damaging the delicate left/right frequency relationships. The eight processed preamp outputs are in addition to the four amplified channels, allowing Forza’s DSP section to manage a larger system easily. Advanced OEM Integration CapabilitiesForza’s eight analog inputs, plus an optical Toslink digital input, support total connectivity even with the most complex OEM systems. If more analog inputs are required, the optional F4IN expansion card adds four additional analog input channels! If a Coaxial SPDIF or a second Toslink SPDIF input is needed, the optional F2O expansion card can be used. Audison’s classic de-EQ process is joined by de-Time and de-Phase capabilities, enabling sound restoration in nearly every OEM system., The electrical signal analysis ensures proper integration and correction for each input and output channel. The built-in universal speaker simulation technology (USS) yields maximum compatibility with any OEM Source, without muting or instability.AF C4.10 bit includes a set of six high-quality cables supplied with a protective printed strip placed upstream of the Molex connectors to increase the resistance to torsion: Pre-In with 8 stereo RCAs interconnection for after-market sources with PRE-OUT outputs Speaker-In with 8 pairs of labeled cables for OEM sources with high-level outputs Speaker-Out with 4 labeled cables to connect the amplifier to the speakers Dsp-Out with 6 labeled cables to connect the amplifier to one or more companion amplifiers Forza Control cable with 2 wires for remote power-on and remote out signal, plus 2 wires for functions programmable on bitDrive software.

More power, more information, more control, more inputs, more speed, more tools, more skills, more guidance, more flexibility - all in one cutting-edge platform! AUDIOPHIL SOUND YOU EXPECT FROM AUDISONAF M6D has six amplified high-fidelity channels 135 watts x 6 @4Ω*, 220 watts x 6 @2Ω*, with the audiophile sound of the latest generation of Audison D-Class technology. Higher switching frequencies, steeper filtering and tighter tolerance components deliver sound that exceeds Class D expectations - in an amazingly compact package!The audio band is extended up to 40kHz and earns the coveted High Resolution certification .Bridging the channel pairs gives 440 watts x 3 @4Ω*, guaranteeing flexible and powerful performance.*Continuous Output Power (RMS) at 14.4 VDC, 1% THD , all channels controlled. Technical Specification POWER SUPPLY Nominal power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 35A Pulse operating voltage: 6.5 ÷ 17.5 VDC Idling current: 1.0 A Standby current draw: 0.009 mA Consumption @ 14.4 VDC, Minimum load impedance (Max Musical Power): 67 A Remote IN: 4 ÷15 VDC (1 mA) Remote OUT: 6.5 ÷15 VDC (150 mA) ART – Automatic Remote Turn on/off from Speaker-In 1.5 VDC Efficiency @ rated power (RMS) @14.4 VDC, 1% THD,4Ω, All Channels: 81% AMPLIFIER STAGE Distortion – THD+N @ 1 KHz, 4Ω, 70% Rated Power: 0.04% Damping factor @ 1 kHz , 4Ω, 2 VRMS: 160 Bandwidth @ -3 dB: 10 Hz ÷ 42 kHz S/N ratio (A weighted @ 1 V Input, Rated Power) Master Input: 103 dBA Minimum load impedance: 6Ch: 2Ω  3 Ch – (Bridge 1/2; 3/4; 5/6): 4Ω Output Continuous Power (RMS) @14.4 VDC, 1% THD: • 6 Ch @ 4Ω: 135W x 6 • 6 Ch @ 2Ω: 220W x 6 • 3Ch (Bridge 1/2; 3/4; 5/6) @ 4Ω: 440W x 3 CEA SPECIFICATIONS Output power @ 4Ω, 1% THD+N, 14.4 V: 130 W x 4 SN ratio (ref. 1 W output): 80 dB INPUTS / OUTPUTS / FILTERS Inputs Pre-In / Speaker-In Input sensitivity Pre-In 0.6 ÷ 6 VRMS Input sensitivity Speaker-In 2.2 ÷ 22 VRMS SUB remote volume control (optional) ±12dB GENERAL REQUIREMENTS Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F) SIZE / WEIGHT Max size W x H x D (mm/inch): 240 x 47 x 156 / 9.44 x 1.85 x 6.14 Weight (kg/lb): 1.95 / 4.3 quantity: 1 piece Impedance (in Ohm): 2,0 Channels: 6 Peak Power (in Watt): 1320 Product group: Amplifier Amplifier Features: bass remote (optional)

AF companion amplifiers are designed to add powerful amplifier channels to AF bit processor amplifiers. A plug-and-play signal input harness is included to make connection to AF bit amplifiers straightforward. AF companion amplifiers are also perfect for use with systems controlled and managed by a standalone bit processor, such as a bit One HD Virtuoso. AF companions have a “straight wire” architecture, without analog preamp functions such as crossover filtering, and are intended for use with external processors. AF M4D boasts four high-fidelity amplified channels 160W x 4 @4Ω*, 260W x 4 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! The audio band is extended up to 40 kHz earning the coveted High-Resolution certification. Bridging channel pairs results in 520W x 2 @4Ω*, guaranteeing flexible and powerful performance. *Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven. Features Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology Unbeatable power/volume ratio up to 0.68 W RMS/cm³ reaching 83% of efficiency Hi-Res compatibility performance, with an extended audio band up to 40 kHz Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs

AF D companion amplifiers are designed to add powerful amplifier channels to AF bit amplifiers. A plug-and-play Input harness is included to make the connection to AF bit amplifiers straightforward. AF D amplifiers are also perfect for use with systems controlled and managed by a standalone bit processor, such as a bit One HD Virtuoso. AF M1D boasts one high-fidelity amplified channel 600W @4Ω*, 1000W @2Ω*, and 1200W @1Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! AF M1D is the only one in the AF D family that can be used also in standalone mode, thanks to a set of manual controls: - adjustable (and defeatable) low-pass 4th-order crossover filter - 0-180° polarity/phase switch - 45 Hz Bass Boost adjustment Combine these functions with the ART DC turn-on from high-level Inputs, the USS speaker-input loading, and the optional VCR-S2 level knob, and this amp can be used to add subwoofers even in systems which lack an Audison AF bit amplifier! *Output Continuous Power (RMS) @14.4 VDC, 1% THD, All channels driven. Features Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology Unbeatable power/volume ratio up to 0.68 W RMS/cm³ reaching 81% of efficiencyHi-Res compatibility performance, with an extended audio band up to 40 kHz

The Audison Forza AF M1.7 bit combines a powerful Class-D amplifier with cutting-edge DSP technology. This amplifier delivers 600W RMS at 4Ω, 1000W at 2Ω, and 1200W at 1Ω—matching the proven Forza AF M1D—but adds a powerful 24-bit, 96kHz DSP. The bit Drive software for the AF M1.7 bit includes specific algorithms for optimizing in-car subwoofer performance. The DSP provides equalization, crossover, time delay management, level adjustments, and dynamic loudness. The AF M1.7 bit also features the exclusive “Bass-Magnifier” function, which maximizes low-frequency output in the cabin for an immersive listening experience and realistic dynamic response. It supports 8 input channels and up to 12 using the optional F4IN card with flexible routing and mixing capabilities via the bit Drive software. It includes the Universal Speaker Simulator (USS) circuit for perfect integration with OEM audio systems. The AF M1.7 bit is compatible with the high-resolution Bluetooth receiver B-CON and its B-CON go app for remote control from a smartphone. Compatibility extends to the new DRC MP CAN and DRC AC remote controllers. The AF M1.7 bit is ideal for car audio enthusiasts seeking exceptional sound quality and advanced control features. Technical Data: Amplifier 1 channel amp - 7 channel DSP Output RMS 4Ω 1x 600 Watt RMS Output RMS 2Ω 1x 1000 Watt RMS Output RMS 1Ω 1x 1200 Watt RMS Inputs 8ch high or low level + 4ch F4INOptical input Consumption 65 A @ 2Ω max musical power Damping factor  140 @ 1 kHz 4Ω Distortion  0,03% 1 kHz  S/N ratio 105 dBA @ A weighted, Master + Optical Filter mode HP/LP/BPButterworth/Linkwitz/Bessel/Chebyshev6 - 48 dB Octave Speaker Turn-on ART Selectable Size 240 mm x 47 mm x 156    

AF companion amplifiers are designed to add powerful amplifier channels to AF bit processor amplifiers. A plug-and-play signal input harness is included to make connection to AF bit amplifiers straightforward. AF companion amplifiers are also perfect for use with systems controlled and managed by a standalone bit processor, such as a bit One HD Virtuoso. AF companions have a “straight wire” architecture, without analog preamp functions such as crossover filtering, and are intended for use with external processors. AF M4D boasts four high-fidelity amplified channels 90W x 4 @4Ω*, 150W x 4 @2Ω* with the audiophile sound of the latest generation Audison D-Class technology. Higher switching frequencies, steeper filtering, and higher-tolerance components deliver sound above and beyond the expectation of Class D – in an amazingly compact package! The audio band is extended up to 40 kHz earning the coveted High-Resolution certification. Bridging channel pairs results in 300W x 2 @4Ω*, guaranteeing flexible and powerful performance. *Output Continuous Power (RMS) @14.4 VDC, 1% THD, all channels driven. Features Improved audio performance and power thanks to the latest generation of ADT (Audison D-Class) technology Unbeatable power/volume ratio up to 0.47 W RMS/cm³ reaching 81% of efficiency Hi-Res compatibility performance, with an extended audio band up to 40 kHz Maximum versatility thanks to the possibility of using the bridging option for each pair of power outputs

At Audison, our commitment to delivering unparalleled sound quality and innovation in-car audio systems remains unwavering. We are thrilled to present our latest masterpiece – the Audison SR 6.600 6-Channel Amplifier with Hi-Res Audio Certification. This amplifier is engineered to redefine your in-car listening experience, setting a new standard in audio excellence. Amplifier Tech Data Channels 6 Class D-Class Efficiency >87% Hi Level Input Yes Low Level Input Yes Digital Input No Power supply voltage / fuse 11 ÷ 17 VDC Operating power supply voltage 11 ÷ 17 VDC / 2 x 30A Idling current 2.2 A Idling current when off 0.04 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power 54 A Remote OUT 4 ÷ 15 VDC (150 mA) Remote IN 4 ÷ 15 VDC (1 mA) ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 1.5 ÷ 7 VDC Amplifier Stage Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.05 % Bandwidth A 10Hz ÷ 42 kHz S/N ratio A 102 dBA Damping factor A A Ch/B Ch 100C Ch 400 Input sensitivity Pre-In 0.32 ÷ 8 VRMS Pre In Impedance >10 kOhm Input sensitivity Speaker-In 1.6 ÷ 40 VRMS Input impedance Speaker-In 3Ohm ÷ 100kOhm (it depends by the Polyfuse specifications) Total Power RMS 1120 W Minimum load impedance Ch 1-4: 2ΩCh 5-6: 1Ω1+2/3+4 Bridged: 4Ω5+6 Bridged: 2Ω Output Power (RMS) @14.4 VDC, 1% THD 6Ch mode@4Ω: 85 x 4 + 110 x 2@2Ω: 140 x 4 + 185 x 2Ch1-4 @4Ω, Ch5-6 @1Ω: 75 x 4 + 340 x 2Ch1-4 @2Ω, Ch5-6 @1Ω: 140 x 4 + 300 x 25Ch mode@4Ω: 85 x 4 + 370 x 1 (Ch5/6 bridged)@2Ω: 130 x 4 + 600 x 1 (Ch5/6 bridged)4Ch mode@4Ω: 280 x 2 (bridged) + 110 x 2@2Ω: 130 x 2 + 260 x 1 + 600 x 13Ch mode@4Ω: 280 x 2 + 370 x 1 (Ch5/6 bridged)280 x 2 (Ch1-4 @4Ω) + 600 x 1 (Ch5/6 bridged @2Ω) Adjustable Crossover Yes CEA Specifications Output power @ 4Ω, 1% THD+N, 14.4 V 75 W x 4 Ch + 85 W x 2 Ch SN ratio (ref. 1W output) A Ch, B Ch: 84 dBAC Ch: 84 dBA Inputs Input Type Pre-In / Speaker-In Filter Pass A FullHi-pass: 50 ÷ 5 kHz @ 12 dB/Oct. Filter Pass B FullHi-pass: 50 ÷ 500 Hz @ 12 dB/OctBand-pass: 50 ÷ 700 Hz (Hi) / 50 ÷ 5 kHz (Lo) @ 12 dB/Oct Filter Pass C FullHi-pass: 50 ÷ 700 Hz @ 12 dB/OctLo-pass: 50 ÷ 700 Hz @ 12 dB/Oct Inputs/Outputs Sub CH - Inputs/Outputs Phase No Inputs/Outputs Bass Boost No Inputs/Outputs Subsonic No Remote Sub Volume (-20 ÷ 6) dB Other Weight 2.52 kg   Dimensions Dimension A 314 mm Dimension B 284 mm Dimension C 155 mm Dimension D 135 mm Dimension E 47.4 mm