FRONT RUNNER Mitsubishi Pajero/Montero Ck (3Rd Gen) Swb Load Bar...
$618.30
$687.00
A set of Load Bars used to transport gear on the roof of your Mitsubishi Pajero/Montero CK SWB. This low profile solution includes 4 mounting Feet, 2 1255mm Load Bars, tracks, installation kit and fitting instructions.
These Load Bars are mounted to the Mitsubishi Pajero/Montero CK SWB via a set of supplied Mounted Feet and Tracks.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRMP003 - Mitsubishi Pajero/Montero CK (3rd GEN) SWB Load Bar Kit - by Front Runner
Consisting of:
2x FASS024 - Foot Set / 40mm - 50mm1x LBSK014 - Roof Load Bar Pair 1255mm(W)1x TRMP002 - Mitsubishi Pajero CK (3rd Gen)SWB Tracks/1600mm(L)1x WDLB001 - Load Bar Wind Deflector / 10mm
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 8.77kg (19.33lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 115mm (5"); Length: 1610mm (63"); Height: 250mm (10")
Shipping Weight:
Weight: 9.4kg (21lbs)
FRONT RUNNER 10In Led Light Round Mx260-Cb / 12V/24V /...
$603.00
$670.00
A high-performance LED driving light reaches a distance of 350m with a color temperature of 6000 Kelvin producing daylight lighting conditions and delivers a luminosity of 3500 lumens. Polycarbonate lens, durable to withstand off-road conditions.
Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan. Equipped with an integrated driver and thermal management system, eliminating the risk of overheating. 12V/24V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural. Special regulations and legislation within each country should be taken into consideration before use.
The MX260-CB must be installed in pairs for 12/24V vehicles. Secures to your Roof Rack with the supplied bracket. Optional LIGH201 or LIGH202 are available and sold separately.
Consists of: 1 x Round LED Light
Product Dimensions:
Light:261mm (10.3'') L x 150mm (5.9'') W x 229mm (9'') H
Light with supplied bracket:261mm (10.3'') L x 150mm (5.9'') W x 251mm (9.9'') H
Weight:4.4Kg (9.7lbs)
SKU: LEDDL112-CB
Lumens: 350012/24V60/2.5W5/0.21 Amps
Color temperature: 6000 K
Lifespan Tc: 5000 h
Guarantee: 5 years
ECE Reference: 50
Special NotesSKU LEDDL112-CB
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit For D-Max &...
$598.50
$665.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
TORQIT Pedal Torq Plus To Suit Toyota Fj Cruiser, Hilux...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Nissan Patrol - PTP1010
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Mitsubishi Challenger, Pajero &...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Isuzu & Toyota -...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Holden, Jeep, Mazda &...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Great Wall V200 -...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Ford Territory & Volkswagen...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
TORQIT Pedal Torq Plus To Suit Ford, Jeep & Mazda...
$539.10
$599.01
The Pedal Torq Plus is the latest and best throttle controller to hit Australia. The new Bluetooth technology utilised in the unit is the only one of its kind that permits a driver to access the engines full potential wirelessly.
A Pedal Torq Plus unit increases throttle response, which means you go fast at a quicker rate. Plus, the simple compact design can be fitted to both diesel and petrol vehicles in less than 60 seconds, without the need for cutting or rewiring.
Paired via Bluetooth to the users’ smartphone, the said automation allows for instant updates, ensuring the most recent technology is always fitted to your vehicle. Even better, the completely-wireless throttle control unit has three modes that are perfect for any terrain and driving condition. The technology and concept is an Australian design, and manufactured in Germany to ensure the Pedal Torq Plus is the highest quality, best throttle controller available on the market.
3 MODES IDEAL FOR TERRAINS AND VARIOUS DRIVING CONDITIONS
* Economy
* Cruise
* Sport
Installation
* Download the Torqit App
* Remove factory plug from the accelerator
* Install the new harness
* Add the device in the Torqit App
Key Features
* 5-year warranty
* Vehicle-specific software
* Completely wireless unit
* 3 ideal settings perfect for any driving condition
* Utilises all factory plugs, no cutting or rewiring required
* Manufactured in Germany
FRONT RUNNER Toyota Hilux (2005-2015) Load Bar Kit / Track...
$592.20
$658.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track & Feet - by Front Runner
Consisting of:
1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 115mm (5")Length 1290mm (51")Height 240mm (9")
Shipping Weight:
Weight 8.9kg (19.5lbs)
FRONT RUNNER Suzuki Jimny 3 Door (2018-Current) Rear Seat Base...
$586.80
$652.00
Massively improve the storage solutions in your Suzuki Jimny with these two carpeted base decks. No need for seat removal. These decks create a great surface for securing your bags, boxes or other cargo.
Includes 2 base decks (1 left and 1 right hand side), 3 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Suzuki Jimny.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
No need to remove the rear seats for installation of the base deck.
Consists of:1 x Left Hand Base Deck1 x Right Hand Base Deck1 x Mounting Brackets SetFitting InstructionsHardware Kit
Materials used:Black powder-coated high strength steelNylon carpeted 12mm laminated plywood
Product Dimensions:795mm (31.3") L x 1295mm (51") W x 228mm (9") H
Weight:10kg (22.1lbs)Load Rating:60Kg (132.3lbs)
ALPINE R-Series 10 Halo Subwoofer With Prolink- R2-SB10V
$584.96
$649.95
Features
Includes Preloaded R2-W10D4 10” R-Series Subwoofer
Ground-breaking Alpine Halo Design
ProLink™ Ported Enclosure Design
USA Designed for Optimal Bass and Sound Quality Performance
CARB compliant 3/4-inch MDF construction
Premium Black Carpet
Silver Alpine Embossed Side Logo Badge
Brushed Aluminium Finished Metallic Front Baffle
KTX-H10 Linking Kit Ready
KTE-10G.2 Mesh Grille Ready
Specifications
Peak Power Handling: 2250W
RMS Power Handling: 750W
High-Excursion Overhung Voice Coil Configuration
65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former
Stacked High-Grade Strontium Ferrite Magnets
Cast Aluminium Frame
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Management & Heat Transfer System
Optimised Dual Flare Pole Vent
Concealed Mount Gasket
Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap)
High-Amplitude Multi-Roll (HAMR) Surround
Dimensions: 16” W x 12.6825” H x 14.5” D
Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M)
12 Gauge OFC Speaker Box Wire
Binding Post Terminal Cup
Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation)
Nominal Impedance: 4Ω+4Ω Dual Voice Coil
2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit)
Frequency Response: 26Hz-200kHz
Vented Enclosure Tuning Frequency: 36Hz
Sensitivity 84dB
ALPINE Digital Mono High Power Amplifier - S2-A120M
$584.96
$649.95
The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.
The next generation S-Series S2-A120M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 1200 Watts RMS power @ 2 Ohms. This massive power output allows to even run multiple subs from a single amplifier. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.
A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.
Features
Install
Terminal Layout: Two-sided
Included terminal covers
Screw terminals (for speaker and power cables)
General
Class-D Amplification (Digital)
Channel Design: Mono Channel
Side panel controls
Thermal Management Control
Top Mounted LED Power/Status Indicator
Speaker Level Input
3 turn-on modes (DC HI, Remote HI, Remote LO)
Input Channel Selector Switch for Subwoofer
Crossover: Variable Low-pass Filter (LPF)
Adjustable Gain Control
Bass EQ
Remote Bass Control (RUX-KNOB2) Ready
Specifications
RMS Power Ratings
Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 1200W
Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 600W
Sound Tuning
Crossover: Variable LPF: 50-400Hz (-24dB/oct)
Bass EQ (+12dB)
General
Power Requirements: 14.4 V.DC (9 – 16 V allowable)
Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
High Level Input with automatic power on
Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
THD+N (@ 10W into 4 Ohms): <0.03%
Damping Factor: >750
Weight: 4.0kg
Dimensions
Heat Sink (WxHxD) mm: 352 x 57 x 210
ALPINE Next-Generation 6-1/2 (16.5Cm) 2-Way Component Pro Edition Speakers -...
$584.96
$649.95
The All-new R-Series Pro Speakers
Alpine’s Legendary R-Series Speakers enter the 3rd generation and are designed with innovative materials to deliver more output and sound simply amazing. You can choose between a professional and standard speaker line to fit your desired sound quality and budget.
If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
The all-new 2022 line-up of R-Series speakers are all Hi-Res Audio certified and feature a frequency response up to 40kHz. For the first time, the R-Series line includes a 3-way system and you can even choose from a Professional and Standard speaker line.
2-Way Component PRO Speaker
The R2-S652 is the 2-Way PRO model of the new 2022 R-Series speaker line-up. It features a 16.5cm door woofer and a 4,3cm tweeter with up to 40kHz frequency response.
Glass-Fiber Reinforced Cone
The door woofer features an all-new glass-fiber reinforced cone. This material is very stiff and extremely light-weight, resulting in a super-fast response and highly accurate music reproduction.
Composite Basket and Large Magnets
The standard models (R2-S69C, R2–S65, R2-S69C and R2-S69) feature composite baskets (in comparison to the Aluminum die-cast baskets of the PRO models) – which makes them more affordable. They fit larger magnets than in previous generations (while maintaining the same mounting depth).
Hi-Res Audio Certified Hard Dome Tweeter
The all-new magnesium hard-dome tweeters deliver clear, detailed music reproduction and play up to 40kHz (Hi-Res Audio). You have the option to flush-mount them in their threaded housing (for example in a door panel) or use the included on-dash mounts. The tweeters can be swivelled in their housing to point them right at the sweet-spot.
Easy-Fit Tweeter in OEM Locations
You can simply remove the installation frame and the trim ring of the R-Series tweeter to minimise its overall size and diameter. The tweeter itself is then small enough to fit it in many OEM tweeter locations (inside A-pillars, mirror triangles or door panels) for a stealthy installation.
Flexible PRO X-Over Network
This large-size crossover network includes many high-quality components selected for best sound quality. You can adjust the mid-range speaker level by -3dB / 0dB / +3dB and the tweeter level as well by -3dB / 0dB / +3dB.
HAMR Surround
Alpine’s HAMR Surround (High-Amplitude Multi-Roll) allows for a maximum cone excursion, while maintaining excellent control. This results in strong bass at high volumes without distortion.
New Speaker Grills
The new speakers grills in hexagon design look very aggressive and do not increase the overall speaker installation diameter.
ALPINE R-Series 10″ Halo Subwoofer With Prolink™ - R2-SB10V
$584.96
$649.95
Features
Includes Preloaded R2-W10D4 10” R-Series Subwoofer
Ground-breaking Alpine Halo Design
ProLink™ Ported Enclosure Design
USA Designed for Optimal Bass and Sound Quality Performance
CARB compliant 3/4-inch MDF construction
Premium Black Carpet
Silver Alpine Embossed Side Logo Badge
Brushed Aluminium Finished Metallic Front Baffle
KTX-H10 Linking Kit Ready
KTE-10G.2 Mesh Grille Ready
Specifications
Peak Power Handling: 2250W
RMS Power Handling: 750W
High-Excursion Overhung Voice Coil Configuration
65.5mm Voice Coil with High-Temp 4-Layer DVC Winding on Aluminium Former
Stacked High-Grade Strontium Ferrite Magnets
Cast Aluminium Frame
Progressive Spider with Reinforced Layer Tinsel Leads
Airflow Management & Heat Transfer System
Optimised Dual Flare Pole Vent
Concealed Mount Gasket
Reinforced Parabolic Cone Structure (Pulp/Kevlar & PP/Mica/Talc Dust Cap)
High-Amplitude Multi-Roll (HAMR) Surround
Dimensions: 16” W x 12.6825” H x 14.5” D
Dual 4Ω Voice Coils Wired in Parallel for a 2Ω Load (Compatible with R-A75M)
12 Gauge OFC Speaker Box Wire
Binding Post Terminal Cup
Threaded Subwoofer Mounting Inserts (for reversible subwoofer orientation)
Nominal Impedance: 4Ω+4Ω Dual Voice Coil
2Ω Impedance Loading: (4Ω+4Ω Parallel Circuit)
Frequency Response: 26Hz-200kHz
Vented Enclosure Tuning Frequency: 36Hz
Sensitivity 84dB
DIRECTION-PLUS Dp 30 Kit For Toyota Landcruiser Wagon 200 -...
$581.40
$646.00
Direction Plus™ Diesel Fuel Pre-Filter Kits protect late model common rail diesel engines against costly injector failure.
Installing a Direction Plus™ Pre-Fuel Filter kit between the fuel tank and the O.E.M fuel filter will remove the majority of water and particle contamination.
This leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
MSA Toyota Hilux 8Th Gen Sr5 / Sr Extra Cab...
$578.70
$643.01
Complete Front & Second Row Set.
Year: 08/19-Current
Model: 8th Gen SR5 / SR Extra Cab
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
Position: Complete
FRONT RUNNER Ford/Mazda T6/T7 (2012-2022) Load Bar Kit / Track...
$576.00
$640.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 50mm Feet, 2 60mm Feet, 2 1255mm Load Bars, 2 Ford Ranger 1200mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.
These Load Bars are mounted to the vehicles roof via a set of supplied Tracks and Track Mounted Feet.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRFM013 - Ford/Mazda T6/T7 (2012-2022) Load Bar Kit / Track & Feet - by Front Runner
Consisting of:
1 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x FASS013 - Foot Set / 60mm-70mm - by Front Runner
1 x LBSK014 - Roof Load Bar Pair 1255mm(W) - by Front Runner
1 x TRFR001 - Ford Ranger (2012-Current) Tracks / 1200mm(L) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (18lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 250mm (10")
Length 1360mm (54")
Height 110mm (4")
Shipping Weight:
Weight 9.3kg (20.5lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
