JL AUDIO CP210-W0V3 DUAL 10W0V3 BASSWEDGE, PORTED, 2 Ω Product highlights •Dual 10" 10W0v3-4 Loaded Ported Enclosure • 1200W Peak • 600W RMS • Top-Quality MDF Construction • Durable Dark Gray Carpet Finish • Five-Way Binding Post Connectors • Embroidered JL Audio Logo Subwoofer Features Dual 10" W0v3 Series Subwoofer Manufacturer preloaded with a JL Audio 10W0v3-4 10" Subwoofer, JL Audio's best-selling subwoofer! Power Handling:RMS: 600 watts Recommended Power Range: 150 - 600 watts Impedance: 2-Ohm Mineral-filled, polypropylene cone woofer for excellent durability Large roll surround for generous amounts of excursion Elevated frame cooling brings air directly to the voice coil Designed for compact sealed enclosures or medium-sized ported enclosures Large excursion for louder bass and less distortion DMA Optimized motor system reduces distortion and tight, clean bass Lead wire woven into spider for added strength Metallic silver frame finish 2.0" High temperature voice coil Free Air Resonance (Fs): 32.09 Hz Sensitivity: 84.07 dB Xmax: 11.4 mm Reference Efficiency (no): 0.1500% Frequency response: ~26 ~ 250 Hz Black Steel-Mesh Grille Insert Available: JL Audio SGRU-10 Matching Amplifier: JL Audio XD600/1v2 JL Audio JX500/1D Authorized Internet Dealer 2 Year Manufacturer's Warranty Enclosure Features: 10" Slot Ported MDF Subwoofer Enclosure Loaded with two 10W0v3 10" subwoofers Designed for forward, rear or down-firing installation Top-quality MDF construction Durable dark gray carpet finish Five-Way binding post connectors Embroidered JL Audio logo Embroidered "Slot-Ported BassWedge" logo on port mouth 2 Ohm final impedance Dimensions: 17-1/2"TD x 14"BD x 29-5/8"W x 13-7/8"H JL Model ComparisonFrom entry level woofers to competition grade, JL has them all. Let us find which one works for you. Model RMS Power Cone Material Surround Material Sensitivity (dB) Frequency Response Xmax (mm Terminals Made In America W7 Series 500-1500 Watts Polypropylene Foam Overroll 82.7 - 86.3 15-250 Hz 19-32 Push Terminals Yes W6 Series 600 Watts Polypropylene Rubber 82.7 - 85.4 20-200 Hz 19 Push Terminals Yes W3 Series 150-600 Watts Polypropylene Rubber 80.5-87.90 20-250 Hz 8.89-15.5 Push Terminals Yes W1 Series 150-300 Watts Polypropylene Rubber 83.9-86.1 22-200 8-11 Push Terminals W0 Series 300-500 Watts Polypropylene Foam 84-88.20 20-250 Hz 11.4-12.7 Push Terminals WX Series 200 Watts Polypropylene Foam 86-87.17 22-250 Hz 10 Spade Terminals

R2-Series Premium Speaker System Suitable for Single-Cab LandCruiser 78 & 79 Series Turn up the bass in your Single-Cab 70 Series — the next Generation R-Series are born to be played loud with the all-new R-Series ‘direct fit’ premium aftermarket speaker upgrade. Alpine’s premium sound solution has been engineered to provide rock solid durability and good looks, with amazing sound and clarity. Equipped with Alpine’s huge R2-Series 6×9” speakers, experience punchy, concise bass as well as uncompromised sound performance and richness possible through Hi-Res Audio certification. Comfort and Convenience have not been forgotten. The LC70-269SC-R houses drink compartments capable of holding a 1.25 litre bottle to a 375ml can – including large pockets to hold maps, tablets, or books. For technological needs, there are USB charge ports in both door pods that allow charging of up to 4 devices at once. Built-in puddle lights also help light the way, assisting vehicle exits in unfamiliar situations. Formed from injection-moulded and highly-resistant PC/ABS polymers, each part is highly durable and structured to withstand almost anything life throws at it. The sleek yet tough design of the LC70-269SC-R elevates the interior aesthetic whilst honouring the rugged history of the vehicle itself. The updated LC70-269SC-R is the pinnacle of Hi-Fi sound performance, design and practicality. A must have accessory to ultimate 21st century off-road lifestyle. Perfect Integration Alpine’s premium sound upgrade for LC70 Series (Single Cab) is the complete audiophile and lifestyle solution. The huge 6×9-inch R2-Series speakers not only sound great, but also provide clean and concise bass performance. Alpine’s LC70-269SC-R combines rugged looks with subtle design cues from the vehicle itself to create a factory-look product for the 21st century. Light Up The Outdoors Avoid getting messy in the mud. Alpine’s puddle light is designed for all your outdoor adventures, illuminating the ground underneath and drawing attention at night. Never have to worry about muddy puddles again, as the ground will be lit up in style. Highly Durable Tough Grille  Without compromise, these flush-fit integrated speaker grilles have been engineered from a strong PC/ABS polymer blend, ensuring high durability and abrasion resistance. A high-gloss black Alpine emblem adorns the grille, providing a striking contrast and premium finish to each door. 4x USB Charging Ports The on-board USB inputs sit discreetly yet elegantly within the speaker pod design, allowing up to 4 devices such as a tablet or smartphone to charge at any one time. This provides a convenient USB charge point at each door, such as the front driver door, front passenger door, rear passenger left and right door. Premium Design Tweeter Housing LandCruiser 70 Series never looked so good. The bold design of the tweeter housing fits into the top dash corners directly replacing the OEM dash trim panels, providing perfect integration with an OEM look. With the tweeters up on the dashboard, the sound image is up high where it should be and overall sounds incredible. Carry Your Life With You Alpine’s design for the LC70 Series integrates a number of convenient necessities. Meticulously designed to accommodate both large bottles and small cans, as well as maps, tablets and almost anything else that will fit. Alpine’s 70 Series speaker solution is ready for your next adventure. Larger Magnet Structure The new R-Series speakers feature a larger magnet structure for incredible bass. Despite this, the driver depth is unchanged from the previous generation to retain installation versatility, but with improved performance. Glass-Fibre Reinforced Cone The high-performance midrange and woofer drivers feature an all-new glass-fibre reinforced cone. This material is extremely rigid and light-weight, resulting in exceptionally fast cone velocity and response time, delivering highly accurate music reproduction. Exclusive HAMR Surround Alpine’s High Amplitude Multi-Roll (HAMR) surround provides a greater maximum and linear cone excursion for high SPL. The HAMR surround maintains full control over the cone at any excursion stage for powerful bass and pure sound. High-Pass X-Over Network This small X-Over networks are very easy to install – in may cases you can keep the original wiring in the vehicle’s doors by simply putting this network in, saving lots of time during installation. You can adjust the tweeter level by -3dB / 0dB / +3dB.   FEATURES Tweeter Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter Voice Coil Type: Dual Gap for optimum linearity and clarity Magnet Material: Neodymium Woofer Cone Material: Hybrid Multi Layer Cone Motor Technology: Linear Drive Technology Surround: HAMR Surround Voice Coil Type: Dual Gap Voice Coil for optimum linearity and clarity Magnet: Ultra High Density Neodymium Magnet DX Ring: DX Ring Wave Guide: Wave Guide Mounting: Shallow Mounting Design Mounting Adapters: Mounting Adapter Kit Included Design: Bi-Amp Ready Design SPECIFICATIONS General Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4ohms Frequency Response: 60Hz-40kHz In-Line High Quality Crossover 59mm Mounting Depth Neodymium Magnet Multi-layer Hybrid Cone Dual Gap Voice Coil All-New Design Circuit for Precision Response Dimensions Woofer Diameter (mm): 160mm x 240mm Woofer Diameter (in): 6″ x 9″ Woofer Mounting Diameter (mm): 167mm Woofer Mounting Diameter (in): 6-19/32″ Woofer Mounting Depth (mm): 75mm Woofer Mounting Depth (in): 3″ COMPATIBILITY Compatible with LandCruiser VDJ 76, 78 & 79 2009> onwards (Single-Cab Only)

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

ALPINE S2-SERIES 12" DUAL VOICE COIL SUBWOOFER-S2-W12D2 Enhance your sound system’s performance with the remarkable S-Series S2-W12D2 12″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 12-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W12D2 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 2-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W12D2. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W12D2 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W12D2 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W12D2 12″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W12D2 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 2Ω Frequency Response: 23Hz – 215Hz Sensitivity (1W/1M): 85.7dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

Dieci 120W 6 Inch 2-Way Coaxial Speakers Large motor assembly Pure copper voice coil Water-repellent treated paper cone TPU surround Neodymium tweeter with PEI dome DIN-size basket protected by abrasion-proof dust paint Tin-plated, high current terminals Silver-plated lead wires Butyl rubber protective cover Epoxy glue for basket and motor system Low carbon content plates Adaptor ring included DISCLAIMER: Design, features and specifications subject to change without notice. Some features in videos on the Internet may not be available on all models, please contact us for the TECHNICAL SPECIFICATIONS for a complete list of features by model. This feature list is for reference only, please contact us to verify features and functionality.

GENERAL SPECIFICATIONSContinuous Power Handling (RMS): 600 WSystem Nominal Impedance: 2 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: NoPHYSICAL SPECIFICATIONSExternal Width (W): 31.375 in / 797 mmExternal Height (H): 15.18 in / 386 mmExternal Depth (D1)L 20.3 in / 516 mmExternal Top Surface Depth (D2): 15.75 in / 400 mmNet Weight: 60.3 lb / 27.35 kg

Enclosed Subwoofer System with Single 10W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω   General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No   Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg

THE ESSENTIAL ACCESSORY SPEAKER DRIVER GRILLE This 5” midrange grille, 100% chemical etching, with an aluminium ring, draws on the codes of our new Utopia M range with its unique ‘M’ profile and will help you achieve a seamless integration into your vehicle.

The 12W0v3 is a rugged performer with excellent efficiency, excursion capability and linearity. The overall performance envelope that puts it right at the top of its price class. It features a beefy 2 in. diameter voice coil and our patented Elevated Frame Cooling design for enhanced power handling and reliability. The 12W0v3 is best used with amplifier power in the 75W - 300W range and is optimized to operate in a moderately sized 1.375 cu. ft. (38.9 l) sealed enclosure, or a 1.75 cu. ft. (49.6 l) ported enclosure.

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, breakaway mounting tabs on the woofer frame allow the C1-400x to be installed in four-hole or two-hole mounting configurations. C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-400x is a proprietary, stamped, steel 4-inch (100 mm) frame and a DMA-optimized motor system. A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has an inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 35 W Peak Music Power: 105 W Recommended Amplifier Power (RMS): 10 – 50 W / Ch. System Efficiency: 84.5 dB @ 1 W / 1 m System Nominal Impedance: 4 Ω System Frequency Response: 64 Hz – 24 kHz ± 3 dB Frame Outer Diameter* (A): 4.03 in / 102 mm Grille Tray Outer Diameter (B): N/A Motor Outer Diameter (C): 2.33 in / 59 mm Frontal Coaxial Tweeter Protrusion** (D): 0.61 in / 16 mm Frontal Grille Protrusion (E): N/A Mounting Hole Diameter (F): 3.70 in / 94 mm Mounting Depth (G): 1.81 in / 46 mm *Does not take into account mounting tabs **Frontal coaxial tweeter protrusion measured from mounting surface

2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter The C1-650se component system is engineered to deliver remarkable fidelity and outstanding value in a format that easily fits in factory locations. Outfitted with pure, silk dome tweeters, the C1-650se component system stands above others in its category with silky smooth, high-frequency clarity and definition. The 1-inch tweeter’s edge-driven design delivers excellent off-axis response and treble extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. Outboard, 3rd order, high-pass in-line filters, with Advanced Tweeter Protection Circuitry, are also included to guard against high-distortion damage and improve power handling. For maximum installation versatility, surface and flush tweeter mounts are also included.  C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low-distortion sound. At the core of the C1-650 woofer is a proprietary, stamped, steel 6.5-inch (165 mm) frame and DMA-optimized motor system. A mineral-filled, injection-molded, polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control the voice coil's motion. Tinsel leads are carefully routed and attached to each spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. To maximize fit, multi-application adaptor rings are included for the woofers, allowing easy, drop-in installation in vehicles equipped with oversized 6.5-inch and 6.75-inch speaker openings. Without the ring, the woofers will also fit into many "6-inch" speaker locations as well.  When it comes to value, C1-650se is a real deal! Sold as a pair. Grilles not available. General Specifications Continuous Power Handling (RMS) 50 W Recommended Amplifier Power (RMS) 10 - 75 W / Ch. System Efficiency 91.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 21 KHz ± 3 dB Woofer Physical Specifications Frame Outer Diameter* (A) 6.25 in / 159 mm Grille Tray Outer Diameter (B) 6.84 in / 174 mm Motor Outer Diameter (C) 3.15 in / 80 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion** (E) N/A Mounting Hole Diameter (F) 5.02 in / 128 mm Mounting Depth (G) 2.07 in / 53 mm *Does not take into account mounting tabs**Frontal grille protrusion measured from mounting surface Tweeter Physical Specifications Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm Flush Mount Mounting Hole Diameter (B) 1.75 in / 45 mm Flush Mount Mounting Depth (C) 0.40 in / 10 mm Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm Surface Mount Tweeter Frontal Protrusion (D2) 0.87 in / 22 mm

ISUB ACTIVE 2.1 2-channel amplifier The ISUB ACTIVE 2.1 subwoofer complements any original audio system, providing powerful (260 W), dynamic bass and amplification of the vehicle's front channels (2.1). It connects to the car radio's speaker outputs via the supplied Plug & Play cable, providing a genuine enhancement of the sound experience without loss of space in the cabin or trunk. KEY POINTS Focal know-how 2-channel amplifier Ready to use (Plug & Play ISO cable included) Compact product, discreet integration Ease of use Various settings (adjustable incoming signal, adjustable amplifier crossover, sound level boost, etc.) Robust design Sound - Acoustics Product type : Ultracompact amplified 20cm (8 ") and 2 -channel amplified subwoofer Loudspeakers : Subwoofer: 8" Filter : Integrated Frequency response (+/- 3dB) : 45Hz - 150kHz Maximum power : 260 watts Motor : Ferrite Nominal Impedance : 4 Ω Nominal power : 130 W RMS Sound - Electronics Number of channels : 2 Configurable High Pass / Low Pass filter : High-pass crossover ajustable from 20 to 50 Hz Low-pass crossover ajustable from 50 to 180 Hz RMS power : 130 W RMS

ALPINE S2-SERIES 10" DUAL VOICE COIL SUBWOOFER-S2-W10D4 Enhance your sound system’s performance with the remarkable S-Series S2-W10D4 10″ Subwoofer. This exceptional subwoofer has undergone a complete redesign, resulting in a product that delivers a level of bass power and reliability that was once reserved for higher-priced models. This subwoofer’s standout feature is its formidable 10-inch driver, meticulously crafted to generate an astounding amount of air movement. The result is bass that not only resonates through your space but also makes its presence felt, adding depth and impact to your audio experience. Whether you’re a dedicated bass enthusiast or simply seeking to elevate your audio, the S2-W10D4 guarantees an immersive experience like never before. Behind its impressive performance is a commitment to precision engineering. The dual 4-ohm voice coils are expertly wound to precise specifications, optimising the subwoofer’s efficiency and ensuring consistent, reliable performance over time. Durability is a key focus in the redesign of the S2-W10D4. Its robust construction and high-quality components are built to withstand the demands of heavy usage, promising you a subwoofer that will endure and continue to impress. One of the notable advantages of this subwoofer is its versatility. Integrating it into a custom car audio setup is a breeze as the S2-W10D4 seamlessly fits into various configurations thanks to its flexible connectivity options. What truly sets the S-Series S2-W10D4 apart is its affordability. We believe that exceptional bass performance should be accessible to all, and that’s precisely what this subwoofer offers. It provides an extraordinary level of bass power and reliability without the hefty price tag, allowing you to elevate your audio experience without breaking the bank. In summary, the S-Series S2-W10D4 10″ Subwoofer is more than just an audio accessory; it’s a gateway to a world of immersive sound. Elevate your sound system with this redesigned powerhouse and experience bass that leaves a lasting impact. Don’t settle for ordinary sound – demand the extraordinary with the S2-W10D4 and redefine your audio experience today. Features Dual Voice Coil Subwoofers with Configuration Jumpers Carbon Fiber / Poly Propylene Cone Poly Propylene / Ceramic Dust Cap High-Grade Strontium Ferrite Magnets Twist-Lock Grille Mount System High-Amplitude Multi-Roll (H.A.M.R.) Surround Push-Type Speaker Terminals (Up to 8AWG Wire Size) Specifications Power Handling: 600W RMS / 1800W Peak Nominal Impedance: 4Ω Frequency Response: 25Hz – 215Hz Sensitivity (1W/1M): 84.9dB Voice Coil: 66.04mm X-Max (1-Way): 15mm Magnet Weight: 1.81kg

ALPINE 6-1/2" 2-WAY WHITE COAXIAL MARINE SPEAKERS (WHITE)-SPS-M601W The new SPS-M601W White 6.5” Type-S 2-Way Coaxial speakers allow you to enjoy the premium and powerful sound Alpine is renowned for, out on the open water. Specifically designed for both fresh and saltwater environments, these IPx5 water-resistant speakers are ready to cut through the wind, waves and motor noise as soon as you are. 7/8” Titanium/PEI balanced-dome tweeters deliver accurate and crisp high-frequency detail whilst the accompanying super-stiff 6.5” poly woofers handle the mid-range frequencies. On the exterior these innovative Marine specific speakers represent the highest in environmental resistance. Their sleek non-resonant, high-strength, UV-resistant grilles protect from yellowing; whilst their high-temperature ABS custom frames provide more than enough strength for any kind of mounting required. Santoprene® rubber surrounds offer high fidelity and frequency response performance whilst still providing excellent resistance against moisture, oil, heat and chemicals. Furthermore they’re tested against fog, salt and blazing sunlight so you can be sure they’ll sound great for many seasons to come. For added convenience, included is a marine grade connection loom for a more robust installation. Features Crossover Network Crossover Type: Built-in Tweeter Protection Woofer Frame: High Temp ABS Frame Cone Material: Poly-Mica Woofer Cone Grill Cover Type: Ultra UV (Centrix® 813) Resistant Grill Tweeter Magnet Material: Neodymium Magnet Application Type / Design Detail: Internal / Fixed Tweeter Tweeter Type: Titanium/PEI Balanced Dome Tweeter Specifications General Sensitivity: 89dB / W(1m) Impedance: 4 Ω Frequency Response: 50Hz – 20khz Dimensions Woofer Mounting Depth: 2-27/32” Woofer Mounting Depth: 72.1mm Woofer Mounting Diameter: 5” Woofer Mounting Diameter: 127mm Woofer Diameter: 6-1/2” Woofer Diameter: 165.1mm Power Handling Power Handling Capacity (Peak): 100 Watts Power Handling Capacity (RMS): 30 Watts CEA-2031 Power Rating: 30 Watts

component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers 5-1/4" treated paper woofer with polyurethane surround 15/16" PEI dome tweeter with external crossover handles up to 60 watts RMS (120 watts peak power) frequency range: 60-23,000 Hz sensitivity: 93 dB woofer mounting depth: 2-3/16" impedance: 4 ohms grilles not included warranty: 2 years MFR # DSK 130.3 Item # 301DSK1303 General Speaker Size 5 1/4 Driver Design 2-way Woofer Design Cone Woofer Material Pressed Paper (Water-Repellent) Woofer Surround Polyurethane Midrange Design --- Midrange Material --- Tweeter Design 24mm Dome Tweeter Material PEI Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included No Parts Warranty 2 Years Labor Warranty 2 Years Specifications Sensitivity (1W at 1 meter) 93 Sensitivity at 2.83 volts N/A Frequency Response 60 - 23k Hz Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 2 3/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 4 1/2 Mounting Height (Inches) 0.192 Frame Width 5.114 Frame Length 5.114

The Hertzaudio Cento Pro CPK 165 PRO car audio system includes the CP 165woofer and the CP 25 tweeter with Tetolon dome and 25 mm voice coil, features ensuring a very wide and linear frequency response. The CP 25 employs the “Center Tuning Duct” technology: the tunnel at the center of the powerful Neodymium magnetic circuit, ensures low-temperature air exchange between the dome and the rear loading chamber, perfectly tuning the acoustics. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. The sophisticated design of the mobile group and suspensions of the CP 165 woofer, featuring a 60Hz calibrated resonance frequency, ensures a medium-low power with excellent punch, making listening to rich low frequency genres a unique experience. The basket is consistent with the family-feeling of the Mille line with the addition of damping and protective rubber. The cone material is inherited from the Mille Pro, as well as the suspension butyl rubber and the Tetolon fiber of the tweeter dome. These materials have excellent damping and lightness characteristics, producing a balanced sound without resonance peaks. The gift box includes the woofers grilles made of a combination of metallic mesh and high resistance ABS plastic frame. The combination of these two elements allows the user to customize the installation with a sophisticated and elegant design.  Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 105 Power Handling - Peak W 315 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92,5 Frequency Response Hz 45 ÷ 22,5k Crossover Cut off 2,8 kHz @ 12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0,2 (0.44) D mm 131,5 Re Ohm 3,3 Fs Hz 60 Le mH 0,3 Vas I 11,5 Mms g 15,4 Cms mm/N 0,44 BL T*m 5,45 Qts 0,57 Qes 0,66 Qms 4,3 Spl dB 92,5

The MLK 165.3 Legend car audio speakers system is composed of the ML 28.3 Legend tweeter and the ML 165.3 Legend woofer with the MLCX 165.3 dedicated crossover. The woofer originates from the ML 1650.3 Legend, inheriting all its technologies such as the Boundary Free Surround, the V-cone profile Pressed-pulp cone with cotton fibres, the six spoke aluminium basket with vented holes; however, it has been designed employing a high density ferrite magnet assembly, characterising its emission in the mid frequency range.  The ML 28.3 Legend tweeter mounts the same Neodymium magnet assembly as the ML 280.3 Legend’s and features all the optimizations made with FEA methods on the dome profile, and that it shares with its “older brother”, except for the most esoteric features such as the die-cast aluminium faceplate, the CNC machined body made from solid aluminium block and the copper short circuit ring.  Like MLCX 2 TW.3, also the MLCX 165.3 crossover features the “Hi-Contour” control to adjust the ML 28.3 tweeter cut-off frequency and so the cross-point with the ML 165.3 woofer, according to the position of the two speakers in the car. Through the tweeter three position level control, with 2 dB step attenuation, the level for a correct timbre balance can be fine-tuned according to one’s own tastes. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 91 Frequency Response Hz 40 ÷ 25k Crossover Cut off 3.5 kHz - 12 dB Oct Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1,65 (3.64) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,37 Vas I 9 Mms g 17 Cms mm/N 0,3 BL T*m 6 Qts 0,57 Qes 0,64 Qms 5,4 Spl dB 92

he Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 25k Crossover Cut off 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.29 (2.84) Weight of one component - Tweeter kg (lb) 0,1 (0.22) Weight of one component - Crossover kg (lb) 0,57 (1.26) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,24 Vas I 8,3 Mms g 17,5 Cms mm/N 0,3 BL T*m 7 Qts 0,47 Qes 0,52 Qms 5,3 Spl dB 93

The MPK 130.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 130.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 130.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.. Component System Size mm (in.) 130 (5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 91 Frequency Response Hz 60 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0.95 (2.09) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 110 Re Ohm 3,1 Fs Hz 90 Le mH 0,25 Vas I 3 Mms g 10,5 Cms mm/N 0,24 BL T*m 5,3 Qts 0,64 Qes 0,74 Qms 5,1 Spl dB 92