AUDISON Prima Line - 6.5" Woofer Component Pair (Ap 6.5)
$189.99
AP 6.5 feature a 32 mm pure copper voice coil, for high power handling and outstanding low frequency control. All the woofer don't employ any filter, to maximize efficiency: the dome profile has been optimised with Klippel R & amp;D Scan Vibrometer to obtain a calibrated mechanical low-pass cut-off frequency. The surround features the exclusive shallow Triple Wave profile, for maximum excursion linearity.
Technical Specs
Nominal diameter
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
210 W
Power Handling - Continuous
70 W
Sensitivity
93.5 dB
Frequency Response
60 ÷ 5k Hz
Voice Coil Ø
32 mm
Magnet size D x d x h
85 x 40 x 15 mm (3.35 x 1.57 x 0.59 in)
Xmax
2.5 mm (0.1 in)
Electric-acoustic Specs
Re
3.1 Ohm
Fs
80 Hz
Le
0.23 mH
Vas
7.6 l (0.268 ft)
Mms
12 g (0.423 oz)
Cms
0.31 mm/N
BL
4.7 T•m
Qts
0.7
Qes
0,8
Qms
4.7
General
Weight
0.78 kg
Dimensions
Dimension A
165 mm (6.5 in)
Dimension B
141 mm (5.55 in)
Dimension C
60 mm (2.36 in)
Dimension D
56 mm (2.2 in)
AUDISON Prima Line - 2" Wide Range Component Pair With...
$239.99
Prima AP 2 MV wide range car audio reproduces the entire range of mid and high frequencies and is perfect for installation in GM, Ford and Toyota vehicles with 50mm (2 in.) OEM placements in the dashboard or A-pillar, where it is combined with an elliptical woofer in the car door. The provided adapter allows direct OEM replacement for many General Motors, Toyota and Mercedes vehicles. The compact size and excellent electroacoustic parameters make it ideal also to be used as a midrange in 3-way systems, as a surround speaker or as a central channel, housed in OEM placements, where the space requirements would not allow the use of a speaker with a larger diameter.
Specification
Comp: Wide range
Size: 50mm (2")
Power Handling:
25W Continuous Power
50W Peak Power
Impedance: 4 Ohm
Frequency Response: 150 - 20k Hz
Sensitivity: 84 dB/Spl
Magnet: Neodymium
Dome: Aluminium
Features
Ultra-wide frequency response ranging from 150 Hz to 20 kHz allowing the entire virtual stage to be concentrated on the top side of the dashboard
25 mm (1 in.) CCAW double layer coil for excellent power handling and low frequency extension
Powerful magnetic assembly made of a symmetrical double Neodymium magnet for optimal excursion control
Aluminium cone and copper shorting ring for a high frequency response up to 20 kHz
Ultra-compact design, thanks to the specifically designed basket and neodymium motor, to facilitate dashboard and A-pillar OEM installations
Provided adapter for direct OEM replacement to suit many General Motors, Toyota and Mercedes vehicles
AUDISON Prima Line - 1" Tweeter And Crossover Component -...
$249.99
The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter component provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The double Neodymium tablet used in the motor provides an excellent extension in high frequency and together with the 1” CCAW voice coil ensures an outstanding dynamic response.AIF technology, to support OEM integration, provides the specialist with three different types of faceplates:1. OEM, for an easy and correct factory placement2. Mesh grille: to obtain the best compromise between protection and performance with a-pillar installations3. Spoke grille: for maximum acoustic performance with a-pillar installationsThanks to the AIF, the AP 1P tweeter expresses its full potential in every application scenario. It is supplied with three mounting accessories that make the AP 1P install a breeze:1. Watch band2. Double-angle cup3. Flush Mounting Ring4. Metal mounting springTechnical SpecificationsSize: 29 mm (1.14″)Power Handling: Hi-pass filtered 2.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance: 8 ΩFrequency Response: 1,2 ÷ 25 kHzCrossover name: APCX P 2TCrossover Type: High Pass, 4kHz, 12 dB/oct.Crossover adjustment: Tweeter Level: 0 / +3 dBSensitivity: 92 dB/SplMagnet: NeodymiumTweeter Voice Coil Ø: 25 mm (1″)Dome: Tetolon fibre
AUDISON Prima Line - 1" Tweeter And Crossover Component -...
$189.99
The AP 1 tweeter features a 26 mm diameter emission diaphragm, an acoustic lens designed to compensate for the frequency response within the 10kHz 13kHz range, a Neodymium REN magnet and extremely small sized dedicated passive crossover.
Specs
Comp TweeterSize 26 mm (1")Power Handling Hi-pass filtered 3.5 kHz @ 12 dB Oct. 150 W Peak PowerImpedance 4Frequency Response 2k 20k HzSensitivity 93 dB/SplMagnet Neodymium
AUDISON Prima Line - 6X9" 2-Way 4 Ohm Component Speaker...
$469.99
APK 690 - KIT 2Way AP 1+AP 690+XOVERAPK 690 systems are ideal for car models with doors equipped to house elliptical speakers, featuring 6×9 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 690. The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation. The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier. The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients. The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.Tweeter -• 26 mm diameter diaphragm combined with a wide-roll surround provides maximum efficiency and reduced resonance frequency.• Acoustic lens designed to compensate for the in-car frequency response in the 10kHz - 13kHz bandwidth caused by critical OEM placements.Woofer -• 25 mm pure copper voice coil, for high power handling and outstanding low frequency control.• Water-repellent treated paper cone, featuring a profile developed with FEM (Finite Element Method) simulation technology and optimized with the Klippel R&D Scan Vibrometer.• Reduced mounting depth, providing ease of installation in OEM placements.• “Triple Wave” surround profile for maximum excursion linearity.• Compact basket, protected by abrasion-resistant and scratchproof coating, the motor affixed with damping epoxy adhesive.• High current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection.
Attribute
Details
Brand
Audison
Condition
NEW
Type
Component
Fitment Size
6x9 Component Set with 1in Tweeter
Power Handling (RMS / Continuous)
100W
Power Handling (Peak)
300W
RMS Wattage Per Speaker
250
Impedance
4 Ohms
Frequency Response
40 – 20k Hz
Sensitivity
95 dB/SPL
Manufacturer SKU
69051090
UPC
8018823129695
ASIN
B07V7FRS4P
Bundle
No
Shipping
Free 2-Day Shipping
Weight
6.39 lbs
AUDISON Prima Line - 5X7" 2-Way 4 Ohm Component Speaker...
$469.99
APK 570 systems is ideal for car models with doors equipped to house elliptical speakers featuring 5×7 in. woofers and AP 1 tweeter with dedicated crossovers APCX TW 570.The crossovers are ultra-compact to facilitate their installation, and include an attenuation of the tweeter output level for outstanding fine-tuning.The R&D team optimized the electro-acoustic parameters of the new woofers for installation in the car door, respecting all the characteristics of the Prima speakers, such as the compact size of the basket to facilitate installation.The mechanical cut-off of the woofer cone-dust cap system ensures they can be used without a filter, maximizing efficiency to be easily driven by any type of amplifier.The large voice coil ensures high power handling and impeccable control even in the most aggressive dynamic transients.The double Faston connectors with direct link to the tweeter speed up the speakers connection, always ensuring a perfect contact.
Specs
Comp 2 way System
Size 5 x 7 in. Woofer
26 mm (1 in.) Tweeter
46,5 x 37,5 x 20,1 mm (1.83 x 1.47 x 0.8 in.) Crossover
Power Handling 100 W Continuous Power
300 W Peak Power
Impedance 4 Ω
Frequency Response 55 – 20k Hz
Sensitivity 93,5 dB/Spl
AUDISON Prima Line - 6.5" 2-Way 2 Ohm Component Speakers...
$524.99
6.5″ 2-Way Component Speakers
The Audison Prima APK 165 2 ohm system features 2 crossovers dedicated to woofer and tweeter and separated, to ease the installation. APCX WF ohm2 crossover shapes AP 6.5 ohm2s frequency response to match it optimally with AP 1 tweeter; it also employs a Low ESR inductor, essential to maximize the power transfer to the 2 ohm coil. APCX TW ohm2 tweeter crossover, instead, is provided with the Hi-Contour function, to enhance the high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.
Features:
2 Ω impedance, to fully exploit the 65 W power per channel at 2 Ω of the AP8.9-bit amplifier.
75 Hz resonance frequency, to extend the frequency range down to low frequencies up to 50 Hz and increase the SPL in the low range.
25 mm mobile voice coil to maximize efficiency achieving 95 dB.
10 mm winding height mobile voice coil to increase maximum linear excursion up to 2,8 mm and minimize distortion, even at high listening levels.
APCX WF 2Ω dedicated woofer crossover with low-loss voice coils to shape the frequency response for an optimal match with the tweeter.
APCX TW 2Ω tweeter crossover featuring the Hi-Contour function to enhance high frequencies, designed to achieve the correct timbre balance with rich low frequencies guaranteed by the woofer.
AP 1 tweeter with an acoustic lens designed to balance the frequency response in the 10kHz 13kHz range, to optimize the product’s acoustic emission in critical OEM placements, where the product performance is affected by the presence of the factory grille.
Connection cable integrated into the passive crossover and terminated with fast-on connectors conforming to OEM integration. The terminations, which are different at each of the two poles, eliminate any possible connection errors, speeding up the installation process and making it safe over time.
AP 6.5 2Ω woofer featuring water-repellent treated paper cone, with profile developed with FEM simulation technology and optimized with Klippel Scan Vibrometer.
Woofer with reduced mounting depth, providing ease of installation in OEM placements.
Woofer with TPU (thermoplastic polyurethane) edge, featuring the unique “triple wave” profile for maximum linearity of excursion.
Woofer with compact basket, protected by abrasion-resistant and scratch-proof coating. Damping epoxy glue provides perfect coupling with the motor system.
Woofer with a high current fast-on terminal with double contact on positive and negative poles for high flexibility and quick connection. The terminal features a temperature-resistant plastic cover, protecting it against accidental short circuits.
Developed with the KLIPPEL suite.
Specifications:
Woofer Size: 165 mm
Tweeter Size: 26 mm
Woofer Voice Coil Diameter: 25 mm
Tweeter Voice Coil Diameter: 20 mm
Crossover Type: Cut Off @ 4.5 / 5 kHz
Magnet Size Woofer: 85 x 32 x 15
Power Handling – Peak: 300 W
Power Handling – Continuous: 100 W
Impedance: 2 Ohm
Frequency Response: 50 ÷ 20k
Crossover Cut Off: @ 4.5 / 5 kHz
Adjustment Tweeter Level: +2; 0
Woofer Cone Diameter: 127 mm
Xmax Woofer: 2.8 mm
AUDISON Prima Line - 6.5" 2-Way 4 Ohm Component Speakers...
$374.99
The two-way system features an AP 1 tweeter and AP 6.5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, and 0dB for an A-pillar installation without additional grilles between the tweeter and the listener. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Technical Specs LF
Woofer Size
165 mm (6.5 in)
Impedance
4 Ohm
Power Handling - Peak
300 W
Power Handling - Continuous
100 W
Frequency Response
60 ÷ 20k
Voice Coil Diameter
32 mm (1.26 in)
Magnet Size
85 x 40 x 15
Crossover Level Adjustment
+2; 0
Technical Specs HF
Tweeter Size
26 mm (1 in)
Voice Coil Diameter
20 mm (1.26 in)
Electric-acoustic Specs LF
Re
3.1 Ohm
Fs
80 Hz
Mms
12 g
Cms
0.31
BL
4.7
Qms
4.7
Qts
0.7
Vas
7.6 l
Le
0.23 mH
Spl
93.5 dB
Xmax
2.5 mm (0.1 in)
Kit Tech Data
Crossover Hi-Pass
HP @ 3,5 kHz - 6 dB Oct
Cone Diameter
129 mm
General
Weight Woofer
0.78 kg
Weight Tweeter
0.04 kg
AUDISON Prima Line - 6.5" + 4" 3-Way 4 Ohm...
$524.99
APK 163
Tree way system features AP 1 tweeter, AP 4 mid-bass and AP 6.5 woofer.APK 163 system deserves special attention; the Audison designers developed a separate crossover dedicated to each speaker, simplifying OEM speaker replacement operation, negating the routing of additional cables through the door, which could void the car warranty. To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Technical Data
Comp
3 way System
Size
165 mm (6.5″) Woofer100 mm (4″) Midbass26 mm (1″) Tweeter46,5 x 37,5 x 20,1 mm (1.83″ x 1.47″ x 0.8″) APCX TW Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX MD Crossover72 x 44,5 x 23 mm (2.83″ x 1.8″ x 0.9″) APCX WF Crossover
Power Handling
125 W Continuous Power375 W Peak Power
Impedance
4 Ω
Frequency Response
50 – 20k Hz
Sensitivity
93,5 dB/Spl
Technical Specifications
Specification
Details
Woofer Size
165 mm (6.5 in.)
Midbass Size
100 mm (4 in.)
Tweeter Size
26 mm (1 in.)
Power Handling (Peak)
375 Watts
Power Handling (Continuous)
125 Watts
Impedance
4 Ohm
Frequency Response
50 Hz – 20 kHz
Crossover Type
LP @ 600 Hz – 6 dB/OctHP @ 600 Hz / 3.5 kHz – 6/6 dB/OctHP @ 3.5 kHz – 6 dB/Oct
Component Adjustment
0 to +2 dB
Magnet Size
Component
Magnet Size (mm)
D × H (in.)
Woofer
85 × 40 × 15
3.35 × 1.57 × 0.59
Midrange
70 × 32 × 10
2.75 × 1.26 × 0.39
Tweeter
19 × 13
0.75 × 0.12
Weight (per speaker)
Component
Weight kg (lb)
Woofer
0.78 kg (1.72 lb)
Midbass
0.40 kg (0.88 lb)
Tweeter
0.04 kg (0.09 lb)
Voice Coil Diameter
Component
Ø mm (in.)
Woofer
32 mm (1.26 in.)
Midbass
25 mm (1 in.)
Tweeter
20 mm (0.8 in.)
AUDISON Prima Line - 5" 2-Way 4 Ohm Component Speakers...
$419.99
Two way system features AP 1 tweeter and AP 5 woofer. APCX TW crossover features a two-position level selector providing the ability to adapt its response to its two main applications: +2dB if installed behind the OEM grille, 0dB for an A-pillar installation without additional grilles between the tweeter and the listener.To ease the installation in OEM placements the woofers are equipped with high current fast-on terminals with double contact on positive and negative poles for high flexibility and quick connection.
Technical Specs LF
Woofer Size
130 mm (5 in)
Impedance
4 Ohm
Power Handling - Peak
225 W
Power Handling - Continuous
75 W
Frequency Response
70 ÷ 20k
Voice Coil Diameter
32 mm (1.26 in)
Magnet Size
85 x 40 x 13
Crossover Type
HP @ 3,5 kHz - 6 dB Oct
Crossover Level Adjustment
+2; 0
Technical Specs HF
Tweeter Size
26 mm (1 in)
Voice Coil Diameter
20 mm (1.26 in)
Electric-acoustic Specs LF
Re
3.1 Ohm
Fs
90 Hz
Mms
9 g
Cms
0.34
BL
4.6
Qms
8
Qts
0.68
Vas
4 l
Le
0.25 mH
Spl
93 dB
Xmax
2 mm (0.08 in)
Kit Tech Data
Cone Diameter
107 mm
General
Weight Woofer
0.65 kg
Weight Tweeter
0.04 kg
AUDISON Prima Active Power Acc Kit Apbxkit
$149.99
The Audison APBXKIT makes it easy to connect and power compatible Audison subwoofer enclosures. Designed for a clean and reliable installation, it ensures your subwoofer performs at its best without unnecessary hassle.
Built with quality materials for lasting durability, this kit is ideal for achieving a secure, efficient setup. Check compatibility with your subwoofer before purchase and have it installed by us or a qualified technician for optimal results.
AUDISON Prima Line - Oem Component Speaker (Apbmw K4M)
$574.99
The two-way APBMW K4M kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Type
89 Crossover Type Hi-Pass: 6 KHz @ 6dB/Oct.
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.4 g
Cms
0.5
BL
4.8
Qms
8.9
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Cone Diameter
80 mm
General
Weight Woofer
0.426 kg
Weight Tweeter
0.06 kg
AUDISON Prima Line - Oem Component Speaker (Apbmw K4E)
$574.99
The two-way APBMW K4E kit creates a three-dimensional sound stage and give the musical message the essential timbre accuracy. The 100 mm (4 in.) midrange is provided with a water-repellent pressed-paper cone, a material providing natural sound. It features a low resonance frequency that allows hi-pass cut-off in the 150-200 Hz range for an excellent mid-low reproduction. The 25 mm coil and Tetolon dome tweeter features a great extension on both medium and high frequencies and is optimized for off-axis output, for an extended sound stage in the three dimensions, that amplifies the perception of reality in the car cabin.
Technical Specs LF
Woofer Size
100 mm (4 in)
Impedance
4 Ohm
Power Handling - Peak
100 W
Power Handling - Continuous
50 W
Frequency Response
90 ÷ 23k
Voice Coil Diameter
25 mm (0.98 in)
Magnet Size
50 x 29 x 3
Crossover Level Adjustment
-3; 0
Technical Specs HF
Tweeter Size
29 mm (1.14 in)
Voice Coil Diameter
25 mm (0.98 in)
Electric-acoustic Specs LF
Re
3.3 Ohm
Fs
90 Hz
Mms
6.3 g
Cms
0.5
BL
4.8
Qms
8.2
Qts
0.48
Vas
1.8 l
Le
0.32 mH
Spl
88 dB
Xmax
0.5 mm (0.02 in)
Kit Tech Data
Crossover Low-Pass
Hi-Pass: 6 KHz @ 6dB/Oct.
Cone Diameter
80 mm
General
Weight Woofer
0.46 kg
Weight Tweeter
0.06 kg
HERTZ Marine Bluetooth Media Receiver - Bluetooth (Hmr Bt)
$349.99
Thanks to the IP67 water resistance rating, the HMR BT Bluetooth® audio controller/receiver is ideal for small boat and Powersports applications. When connected directly to an amplifier, it can be used as a stand-alone source unit/receiver or it can provide Bluetooth® connectivity to any source unit with line-level inputs. The white LED backlit push-button controls are always well visible at any hour of the day. Ready to have some serious fun with the HMR BT Bluetooth® Audio Controller/Receiver?
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
marine digital media receiver
made for off-road and marine use
weatherized face and rubber buttons (IP67 rating)
buttons are backlit for day or night use
built-in Bluetooth 5.0
rear-panel amplifier output
cutout dimensions: 1.77"
warranty: 1 year
MFR # HMR BT
Item # 301HMRBT
Specification
FRONT PANEL IP RATING
IP67
LINE OUTS
1x Stereo RCAs (left and right)
FREQUENCY RESPONSE
20 Hz - 18 kHz (±1dB)
S/N Ratio @ 4Vrms (THD <1%)
93 dB (20 Hz - 20 kHz)
PREOUT VOLTAGE & IMPEDANCE
4V RMS / <100Ohm
REMOTE OUT
8V - 24V
OPERATING VOLTAGE
8V - 28V
Fuse
2A
OPERATING TEMPERATURE RANGE
-10°C - 50°C
Sources
BLUETOOTH®
5.0Audio streamingMax distance 10 m / 30 ft.
A2DP / AVRCP
Playback
Qualcomm® APTX low latency
CD quality streaming
REMOTE CONTROL
HMC U1
Size & Mounting
Mounting Hole diameter mm (in.)
Ø 45 (1.77)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
73,2 - 2.9 (mm - in.)
A1
64,1 - 2.5 (mm - in.)
B
63,7 - 2.5 (mm - in.)
B1
27,7 - 1.09 (mm - in.)
C
39,1 - 1.54 (mm - in.)
D
16,7 - 0.66 (mm - in.)
E
55,8 - 2.2 (mm - in.)
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Aux, Am-Fm...
$1,049.99
HMR 50 advanced connectivity includes SiriusXM-Ready™, Bluetooth APTX (CD-Audio quality), USB 2.0 port (iPad/ iPhone control) to convert your deck in a real multimedia environment. The FM (RDS for EU)/AM PLL radio with Marine Weather Band completes the standard equipment.
Specification
DISPLAY
3.5” COLOR TFT IPS
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IP RATING
IP66
MULTI-ZONE
3 ZONES3x L+R (one per zone) (HPF: ALL, 60, 80, 100 Hz on ZONE1 only)
LINE OUT
2 (1 x L + R per zone)
SUBWOOFER OUT (RCA)
1x L+R (LPF: ALL, 60, 80, 100 Hz)
AUX INPUT (RCA)
1x L+R
EQUALIZER
CUSTOM 8 BANDS for each zone
EQ. PRESET
5
CAMERA IN
Yes
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM (RDS) (EU/US) Weather band
USB
Yes (2A)
IPOD/IPHONE
Yes
DAB+ READY
-
SIRIUSXM READY
Yes
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming with ID3 Tag DisplayAPTX (CD AUDIO QUALITY)
REMOTE CONTROL
HMC D1 (up to 3) HMC U1 (up to 3)
Size & Mounting
Unit Size mm (in.)
W 146 (5.748) x H 105 (4.134) x D 121 (4.763)
Mounting Hole size mm (in.)
W 122 (4.8) x H 52 (2.05)
Mounting Depth mm (in.)
99 (3.89
Mounting Method
Panel mount (4 screws)
Physical Specs
A
146 - 5.75 (mm - in.)
B
105 - 4.13 (mm - in.)
C
98 - 3.86 (mm - in.)
D
34 - 1.34 (mm - in.)
E
50 - 1.97 (mm - in.)
HERTZ Marine Digital Media Receiver- Dab+ Ready*, Bluetooth, Usb, Aux,...
$689.99
HMR 20 turn every cruise in an exciting adventure bringing the music of your favorite artist to open water. The powerful (RDS)/ AM PLL radio and the extended connectivity powered by DAB+ Ready, Bluetooth audio streaming and USB 2.0 port will liven up your trip with tons of musical contents.
Specification
DISPLAY
3” COLOR TFT IPS
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
2
LINE OUT
2 (1 x L + R per zone)
SUBWOOFER OUT
1 (Low Pass 60-80-100 Hz)
AUX INPUT
1 x L + R
EQUALIZER
4 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM with RDS (where available)
USB
Yes
IPOD/IPHONE
-
DAB+ READY
Yes
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming with ID3 Tag Display
Physical Specs
Unit Size mm (in.)
W 146 (5.75) x H 105 (4.13) x D 132 (5.2)
Mounting Hole size mm (in.)
W 120 (4.72) x H 50 (1.97)
Mounting Depth mm (in.)
98 (3.86)
Mounting Method
Screw
HERTZ Marine Digital Media Receiver- Bluetooth, Usb, Aux, Am-Fm (Hmr...
$609.99
The new Hertz source features a minimalist square-shaped design, perfectly in line with the latest trends in the most prestigious navigation instruments. The centerpiece is a generous display with the large marine-grade pushbutton panel symmetrically distributed in the lower and upper parts. Thanks to Bluetooth® 5.0 you can stream high-quality audio from your favorite mobile device, maximizing open water fun!
Specification
DISPLAY
2.8” DOT Matrix display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IP RATING
IP66
LINE OUTS
2x L+R (Front and Rear)
SUBWOOFER OUT (RCA)
1x L+R (LPF: 80, 120,160 Hz)
AUX INPUT (RCA)
1x L+R
EQUALIZER
BASS-TREBLE
EQ. PRESET
3
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM (EU/US)
USB
Yes (1A)
IPOD/IPHONE
-
DAB+ Ready
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
5.0Audio streaming
REMOTE CONTROL
HMC U1 (up to 3)
Size & Mounting
Unit Size mm (in.)
W 126 (4.960) x H 114 (4.488) x D 96.5 (3.799)
Mounting Hole size mm (in.)
Ø 89,5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
Panel mount (4 screws); U-Bracket
Physical Specs
A
126 - 4.96 (mm - in.)
A1
113 - 4.45 (mm - in.)
B
114 - 4.49 (mm - in.)
B1
63 - 2.48 (mm - in.)
C
70.8 - 2.79 (mm - in.)
D
25.7 - 1.01 (mm - in.)
E
89.5 - 3.52 (mm - in.)
HERTZ Marine Digital Media Receiver - Dab+, Bluetooth, Usb, Am-Fm...
$574.99
HMR 10 D features DAB + compatibility to listen to your favorite radio stations with unmatched audio quality. It is the perfect choice for boat enthusiast who want a great sound on board with a reduced gauge installation. With two pairs of high quality stereo outputs, a screen readable at all times and a generous marine-grade control panel, it will be a breeze to control your favorite playlist on USB or Bluetooth© streaming for maximum fun in water.
Specification
DISPLAY
2.8 DOT Matrix Display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
-
LINE OUT
2 x L + R (FRONT + REAR)
SUBWOOFER OUT
-
AUX INPUT
1 X L + R
EQUALIZER
3 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM with RDS (where available)
DAB+ READY
Yes
USB
Yes
IPOD/IPHONE
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
2.1Audio streaming
Physical Specs
Unit Size mm (in.)
Diameter 113 (4.45) D 96.5 (3.79)
Mounting Hole size mm (in.)
89.5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
U-bracket
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Am-Fm (Hmr...
$469.99
HMR 10 is ideal for boat enthusiast who want a great sound on board with a reduced gauge installation. With two pairs of high quality stereo outputs, a screen readable at all times and a generous marine-grade control panel, it will be a breeze to control your favorite playlist on USB or Bluetooth© streaming for maximum fun in water.
Specification
DISPLAY
2.8 DOT Matrix Display
PEAK POWER @ 4 Ω
4 x 50 W
FRONT PANEL IPX RATING
IP66
MULTI-ZONE
-
LINE OUT
2 x L + R (FRONT + REAR)
SUBWOOFER OUT
-
AUX INPUT
1 X L + R
EQUALIZER
3 PRESET
CAMERA IN
-
BATTERY VOLTAGE GAUGE
-
Sources
TUNER
AM/FM with RDS (where available)
USB
Yes
IPOD/IPHONE
-
SIRIUSXM READY
-
NMEA 2000 READY
-
BLUETOOTH
2.1Audio streaming
Physical Specs
Unit Size mm (in.)
Diameter 113 (4.45) D 96.5 (3.79)
Mounting Hole size mm (in.)
89.5 (3.52)
Mounting Depth mm (in.)
72 (2.83)
Mounting Method
U-bracket
HERTZ Marine Remote Control (Hmc U1)
$294.99
Play your favorite song and pump up the volume while swimming in open water. With IPX7 certification you can install HMC U1 remote control anywhere on the boat. Optional for CAPRI, HMR 50, HMR 20, HMR 18, HMR 18D, HMR 15, HMR 15 D, HMR 10 D, HMR 10, HMR BT.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 45 (1,77)
Mounting Method
U-Bracket
Physical Specs
mm
in
A
68
2.68
A1
70
2.76
B
58
2.28
C
29
1.13
D
18
0.70
E
46
1.83
HERTZ Marine Remote Control With Tft Display (Hmc D1)
$429.99
HMCD1 provides the ability to replicate every function of the HMR 50 main unit, creating up to 3 independently controlled listening areas.
Optional for HMR 50
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 75 (2.95)
Mounting Method
U-Bracket/Screw
Physical Specs
mm
in
A
146
5.75
B
105
4.13
C
12
0.47
D
34
1.34
E
80
3.15
G
50
1.97
H
133
4.98
HERTZ Dab+ Digital Radio Module For Hertz Marine Hmr 20...
$314.99
This module adds DAB+ DIGITAL RADIO capability to Hertz Marine Source. Provided with the dedicated antenna.
Optional for Capri and HMR 20
HERTZ Hertz Marine 6M Remote Controller Extension Cable (Hma C1306)
$119.99
13 pin remote controller extension cable 6 mt.
Optional for HMR 50.
HERTZ Hertz Marine Remote Controller Y-Splitter Cable (Hma C13Y)
$109.99
13 pin y cable.
Optional for HMR 50
HERTZ Hertz Marine 10M Remote Controller Extension Cable (Hma C1310)
$174.99
HMA C1310 extension cable is made to connect CAPRI HD1 to the CAPRI H100 main unit.
Optional for CAPRI - 10 mt.
HERTZ Marine Remote Control With Tft Ips Display (Capri Hd1)
$849.99
CAPRI HD1 allows to replicate every function of the main unit in every place of the boat you desire, maximizing the onboard comfort.
Optional for CAPRI.
General Specifications
SIZE & MOUNTING
Mounting Hole diameter mm (in.)
Ø 60 (2.95)
Mounting Method
Screw
Physical Specs
mm
in
A
178.5
7.02
A1
163
6.42
B
101
3.57
B1
84
3.31
C
18
0.71
D
31.30
1.23
E
59. 89
2.36
F
8
0.31
HERTZ Marine Digital Media Receiver - Bluetooth, Usb, Aux, Am-Fm,...
$1,799.99
ITALIAN SYMPHONY OF ELEGANCE AND HI-END AUDIO MASTERY
Introducing “Capri,” the epitome of elegance and sophistication in hi-end audio sources. Inspired by the breathtaking beauty and luxurious atmosphere of the namesake island, the Capri Hi-End Source is a true masterpiece that transcends ordinary audio experiences. With meticulous attention to detail and uncompromising craftsmanship, the Capri Hi-End Source by Hertz represents the pinnacle of audio engineering. Engineered to deliver superior sound quality and withstand the harsh marine environment, this top-of-the-line audio source is designed to elevate your boating experience to new heights. With a focus on high-resolution audio, CAPRI ensures that every note, every detail, and every nuance of your favorite music is reproduced with stunning clarity and fidelity, allowing you to immerse yourself in a true audiophile-grade experience on the water.
Specification
DISPLAY
4.3” COLOR TFT IPS
PEAK POWER @ 4 Ω
CLASS-D: 4 x 70 W
FRONT PANEL IP RATING
IP67
MULTI-ZONE
4
LINE OUT (RCA)
4x L+R (one per zone) - HPF: ALL, 60, 80, 100 Hz
SUBWOOFER OUT (RCA)
4x (LPF: ALL, 60, 80, 100 Hz)
AUX INPUT (RCA)
1x L+R
S/PDIF DIGITAL IN
Toslink (24 bit/96 kHz)
S/PDIF DIGITAL OUT
Coaxial (24 bit/96 kHz)
EQUALIZER
CUSTOM 8 BANDS for each zone
EQ. PRESET
8
CAMERA IN
Yes
BATTERY VOLTAGE GAUGE
Yes
Sources
TUNER
AM/FM (RDS) (EU/US) Weather band
USB
Yes (2A)
IPOD/IPHONE
Yes
DAB+
Ready
SIRIUSXM READY
Yes
BLUETOOTH
5.1Audio streaming with ID3 Tag DisplayLDAC – AAC – APTX HD
REMOTE CONTROL
HMC HD1 (up to 4 zones) HMC U1 (up to 2 zones)
Size & Mounting
Unit Size mm (in.)
W 146 (5.748) x H 105 (4.134) x D 121 (4.763)
Mounting Hole size mm (in.)
W 122 (4.8) x H 52 (2.05)
Mounting Depth mm (in.)
99 (3.89
Mounting Method
Panel mount (4 screws)
Physical Specs
A
178.5 - 7.023 (mm - in.)
B
101 - 3.57 (mm - in.)
C
104 - 4.09 (mm - in.)
D
31 - 1.22 (mm - in.)
E
60 - 2.36 (mm - in.)
HERTZ Digital Interface Processor (S8 Dsp)
$1,309.99
The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials.
General Specifications
POWER SUPPLY
Nominal Power supply voltage / fuse:
7 ÷ 20 VDC / 1A
Pulse operating voltage:
5 ÷ 24 VDC
Idling current:
0.34 A
OFF current (ART= OFF):
<80 uA
OFF current (ART= ON):
<80 uA
Remote IN
6 ÷ 20 VDC (10 mA)
Remote OUT
4 ÷ 20 VDC (150 mA)
ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable):
1.5 ÷ 7 VDC
Input Stage
Analog low level Inputs
6 ch. (Differential input) (Molex microfit to RCAs)
Analog high level Inputs
6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator)
Digital inputs
Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA)
Input sensitivity (low level)
0.8V – 6V RMS
Input sensitivity (high level)
2.5V – 21V RMS
Analog inputs management
Audio input routing matrix type
Analog inputs eq
7 bands paragraphic for each input channel
ART
Automatic Remote Turn-On/Off with Speaker-In
Output Stage
Analog outputs (rca)
8 channels
Max output level (rms) @ 0.05% THD
4V
Analog outputs management
The DSP controls each output channel: gain, crossover, EQ, delay, polarity
Bandwidth
10Hz – 40KHz (+/-3db)
Signal to noise ratio (A weighted)
105dBA (Analog Input) 112dBA (Digital Input)
THD+N (@ 1Vrms out, @ 1Khz)
<0.005%
Crosstalk (channel separation) @ 1KHz
>95dBA
Digital Signal Processor
Sample rate
96KHz
Bit depth
24
Output equalizer
15 bands per channel w/ adjustable Q and Frequency
Equalizer resolution
1/10th dB per step +12dB / -12dB
Time alignment (distance)
0 ÷ 468.4 cm / 0 ÷ 184.4 inches
Time alignment (time)
0 ÷ 13.5ms
Time alignment (step)
0,08 ms; 2,8 cm / 1.1 inch
Time alignment (fine set)
0,02 ms; 0,7 cm / 0.27 inch
Crossovers
AP/HP/LP/BP all channels
Crossover type
Butterworth, Linkwitz-Riley, Bessel (All Channels)
Crossover slope
From 6dB/oct. until 30dB/oct. (6dB step)
Crossover steps
120 steps 20Hz-20KHz
Mute function
Each channel individually, or all channels.
Presets
4 presets
Presets selection
2 specific wires to control the 4 presets selection by extarnal switches.
Input selection by wire
One specific wire to select the desired input between Analog or Digital.
Audio signal compressor on output stage
Yes (enable/disable)
DSP chipset
Analog Device: ADAU1451
DSP management by bt app (iOS/ Android)
1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file.
Setup file sharing via bt
Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode.
DSP management by pc / mac / ios / android
Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Physical Specs
Max size W x H x D (mm/inch)
130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47
Weight (kg/lbs)
0,66 / 1.45
HERTZ 24V Marine 1740W 6 Channel Amplifier (Venezia V6 24V)
$2,149.99
Venezia V6 24V option is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
6 - 5 - 4 - 3
POWER SUPPLY
Power supply voltage
22 ÷ 33 VDC
ldling current (power ON/OFF):
1 A / 0.04 mA
Consumption@ 1Ω, 28.8 VDC (Max Musical Power):
30 A
Remote In:
7 ÷ 33 VDC - 1 mA
Remote Out:
14÷ 33 VDC
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,06%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
100 dB
Damping factor (100Hz @ 4Ω)
130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@6Ch:@5Ch:@4Ch:@3Ch:
2Ω2Ω + 2Ω + 2Ω +2Ω + 4Ω2Ω + 2Ω + 2Ω +4Ω + 4Ω4Ω
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 28.8 VDC, THD 1%
6Ch
160 W x 6 (4Ω)
6Ch
290 W x 6 (2Ω)
5Ch
160 x 4 (4Ω) + 580 x 1 (4Ω)
5Ch
290 x 4 (2Ω) + 580 x 1 (4Ω)
4Ch
160 x 2 (4Ω) + 580 x 2 (4Ω)
4Ch
290 x 2 (2Ω) + 580 x 2 (4Ω)
3Ch
580 x 3 (4Ω)
Total Power
1740 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inC Ch. Pre in
Pre Out:
No
Ch. A filters:
MONO IN (on/off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Ch. B filters:
MONO IN (on/off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Ch. C filters:
MONO IN (on-off)
Yes
By-pass
Yes
Hi-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Lo-pass:
50 ÷ 500 Hz @ 12 dB/Oct
Bass boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
330
13
B
300
11.18
C
200
7.87
D
170
6.7
E
54
2.12
kg
lb
Weight:
3.72
8.2
HERTZ 24V Marine 1010W 5 Channel Amplifier (Venezia V5C 24V)
$1,149.99
Venezia V5C 24V is the compact five-channel marine amplifier, featuring 80 W x 4 (4Ω) plus 330 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5C 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5C 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
5 - 3
POWER SUPPLY
Power supply voltage
22 ÷ 33 VDC
ldling current (power ON/OFF):
1.7 A / 0.05 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
47 A
Remote In:
7 ÷ 15 VDC - 1 mA
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,05%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
100 dB
Damping factor (100Hz @ 4Ω)
>130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@5Ch:@3Ch:
2Ω4Ω + 4Ω + 2Ω
Weight (kg/lb):
3.72 / 8.2
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 28.8 VDC, THD 1%
5Ch
80 W x 4 (4Ω) + 330 x 1 (4Ω)
5Ch
115 W x 4 (2Ω) + 550 W x 1 (2Ω)
3Ch
230 W x 2 (4Ω) + 330 W x 1 (4Ω)
3Ch
230 W x 2 (4Ω) + 550 W x 1 (2Ω)
Total Power
1010 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inSub Ch. Pre in
Pre Out:
No
A Ch. filters:
Yes
By-Pass
Yes
Hi-Pass :
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
B Ch. filters:
By-pass:
Yes
Hi-Pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-Pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Sub Ch. filters:
By-pass:
No
Low-Pass:
50 ÷ 250 Hz @ 24 dB/Oct
Phase (adjust°):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24 dB/Oct
Boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
270
10.6
B
240
9.44
C
185
7.2
D
155
6.1
E
54
2.12
kg
lb
Weight:
3.72
8.2
HERTZ Marine 1700W 5 Channel Amplifier (Venezia V5)
$1,574.99
Venezia V5 is the most-powerful five-channel Hertz marine amplifier ever, featuring 130 W x 4 (4Ω) plus 490 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting...
General Specs
Channels
5 - 3
POWER SUPPLY
Power supply voltage
9 ÷ 16 VDC
ldling current (power ON/OFF):
1.8 A / 0.04 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
70 A
Remote In:
7 ÷ 15 VDC - 1 mA
AMPLIFIER STAGE
Distortion - THD (100Hz @ 4Ω):
<0,05%
Bandwidth:
10 ÷ 42 kHz
S/N Ratlo (A welghted @ 1 V):
102 dB
Damping factor (100Hz @ 4Ω)
130
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10 kΩ
Load impedance (MIN)@5Ch:@3Ch:
2Ω4Ω + 4Ω + 2Ω
Weight (kg/lb):
3.72 / 8.2
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%
5Ch
130 W x 4 (4Ω) + 490 x 1 (4Ω)
5Ch
220 W x 4 (2Ω) + 820 W x 1 (2Ω)
3Ch
440 W x 2 (4Ω) + 490 W x 1 (4Ω)
3Ch
440 W x 2 (4Ω) + 820 W x 1 (2Ω)
Total Power
1700 W
INPUTS / FILTERS
lnputs:
A Ch. Pre inB Ch. Pre inSub Ch. Pre in
Pre Out:
No
A Ch. filters:
Yes
By-Pass
Yes
Hi-Pass :
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
B Ch. filters:
By-pass:
Yes
Hi-Pass:
50 ÷ 500 Hz @ 12 dB/Oct
Band-Pass:
50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct
Sub Ch. filters:
By-pass:
No
Low-Pass:
50 ÷ 250 Hz @ 24 dB/Oct
Phase (adjust°):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24 dB/Oct
Boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
330
13
B
300
11.8
C
200
7.87
D
170
6.7
E
54
2.12
kg
lb
Weight:
3.72
8.2
HERTZ 24V Marine 1260W 1 Channel Amplifier (Venezia V1 24V)
$1,299.99
Venezia V1 24V option is the most-powerful mono Hertz marine amplifier ever, featuring 1260 W @ 1Ω stable! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation. Venezia V1 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V1 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage
22 ÷ 33 VDC
ldling current (power ON/OFF):
1 A / 0.04 mA
Consumption@ 1Ω, 28.8 VDC (Max Musical Power):
27 A
Remote In:
7 ÷ 33 VDC - 1 mA
Remote Out voltage:
14 ÷ 33 VDC
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,02%
Bandwidth:
10 ÷ 500 Hz
S/N Ratlo (A welghted @ 1 V):
102 dB
Damping factor (100Hz @ 4Ω)
500
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10kΩ
Load impedance (MIN)
1 Ω
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 28.8 VDC, THD 1%
1Ch
700 W (4Ω)
1Ch
1260 W (2Ω)
1Ch
1260 W (1Ω)
Total Power
1260 W
INPUTS / FILTERS
lnputs:
PRE IN
Pre Out:
Hi-Pass filter 50 ÷ 250 Hz @ 12 dB/Oct
Filters:
Yes
By-pass
Yes (Full)
Lo-Pass:
50 ÷ 500 Hz @ 24 dB/Oct
Phase (adjust):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24dB/Oct.
Bass boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
270
10.63
B
240
9.45
C
185
7.28
D
155
6.10
E
54
2.12
Weight (kg/lb):
kg
lb
2.72
5.99
HERTZ Marine 1260W 1 Channel Amplifier (Venezia V1)
$1,260.00
Venezia V1 is the most-powerful mono Hertz marine amplifier ever, featuring 1260 W @ 1Ω stable! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation. Venezia V1 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V1 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage
9 ÷ 16 VDC
ldling current (power ON/OFF):
1 A / 0.04 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
52A
Remote In:
7 ÷ 15 VDC - 1 mA
AMPLIFIER STAGE
Distorsion - THD (100Hz @ 4Ω):
<0,02%
Bandwidth:
10 ÷ 500 Hz
S/N Ratlo (A welghted @ 1 V):
102 dB
Damping factor (100Hz @ 4Ω)
500
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Pre-ln impedance:
10kΩ
Load impedance (MIN)
1 Ω
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%
1Ch
700 W (4Ω)
1Ch
1260 W (2Ω)
1Ch
1260 W (1Ω)
Total Power
1260 W
INPUTS / FILTERS
lnputs:
PRE IN
Pre Out:
Hi-Pass filter 50 ÷ 250 Hz @ 12 dB/Oct
Filters:
Yes
By-pass
Yes (Full)
Lo-Pass:
50 ÷ 500 Hz @ 24 dB/Oct
Phase (adjust):
(0 ÷ 180°)
Subsonic:
25 Hz @ 24dB/Oct.
Bass boost 50 Hz (adjust):
(0 ÷ 12) dB
Physical Specs
mm
in
A
270
10.63
B
240
9.45
C
185
7.28
D
155
6.10
E
54
2.12
Weight (kg/lb):
kg
lb
2.72
5.99
HERTZ Powersport 600W 4 Channel Amplifier (Hmp 4D)
$594.99
Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results.
General Specs
Channels
4 - 2
POWER SUPPLY
Power supply voltage / fuse:
11 ÷ 15 VDC / 1 x 15 A
Idling current (power ON/OFF)
1.2 A / 0.04 mA
Consumption @ 2 Ω, 14.4 VDC (Max Musical Power):
15 A
Remote In:
4 ÷ 15 VDC - 1 mA
ART:
Automatic Remote Turn-On/Off
AMPLIFIER STAGE
Distorsion - THD (100 Hz @ 4Ω)
0.2 %
Bandwidth:
10 ÷ 30K Hz
S/N Ratio (A weighted @ 1 V):
95 dB
Damping factor (100 Hz @ 4Ω)
45
Pre-In sensitivity:
LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V
Load impedance (MIN)@ 4 Ch:@ 2 Ch:
2Ω4Ω
Max size (mm/in):
223 x 100,5 x 43,6 / 8.77 x 3.95 x 1.71
Weight (kg/lb):
1.35 / 2.97
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:
4 Ch
50 W x 4 (4 Ω)
4 Ch
65 W x 4 (2 Ω)
3 Ch
50 W x 2 (4 Ω) + 130 W x 1 (4 Ω)
3 Ch
65 W x 2 (2 Ω) + 130 W x 1 (4 Ω)
2 Ch
130 W x 2 (4 Ω)
OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%:
4 Ch
60 W x 4 (4 Ω)
4 Ch
75 W x 4 (2 Ω)
3 Ch
60 W x 2 (4 Ω) + 150 W x 1 (4 Ω)
3 Ch
75 W x 2 (2 Ω) + 150 W x 1 (4 Ω)
2 Ch
150 W x 2 (4 Ω)
Total Power
600 W
INPUTS / FILTERS
Inputs:
PRE IN
FRONT Ch. filters FULL:
Yes
Lo-Pass:
65-85-115 Hz @ 12 dB/Oct
REAR Ch. filters FULL
Yes
Hi-Pass:
65-85-115 Hz @ 12 dB/Oct
Lo-Pass:
65-85-115 Hz @ 12 dB/Oct.
Physical Specs
mm
in
A
223
8.78
B
207
8.15
C
100,5
3.96
D
76
2.99
E
43,6
1.72
HERTZ Powersport 300W 1 Channel Amplifier (Hmp 1D)
$594.99
Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 1D amplifiers is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. The level of HMP 1 D amplifiers can be remote controlled with the included HRC BM (Hertz Remote Control Bass Management). Connected to the Remote Control plug, this provides extremely precise volume level from the comfort of your seat.
General Specs
Channels
1
Power Supply
Power supply voltage / fuse:
11÷15 VDC / 1 x 15 A
Idling current (power ON/OFF):
1 A / 0.04 mA
Consumption @ 2Ω, 14.4 VDC (Max Musical Power):
15 A
Remote In:
4 ÷ 15 VDC - 1 mA
ART :
Automatic Remote Turn-On/Off
Amplifier Stage
Distortion - THD (100 Hz @ 4Ω):
0.1 %
Bandwidth:
10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V):
105 dB
Damping factor (100 Hz @ 4Ω):
300
Pre-In sensitivity:
LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V
Load impedance (MIN) @ 2 Ch:
2Ω
Max size (mm/in.):
223 x 100.5 x 43.6 / 8.77 x 3.95 x 1.70
Weight (kg/lb.):
1.35 / 2.97
Adjustable Crossovers
yes
Output Power
Output Power (RMS) @ 14.4 VDC, THD 1%:
1 Ch:
150 W x 1 (4Ω)
1 Ch:
250 W x 1 (2Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch:
180 W x 1 (4Ω)
1 Ch:
300 W x 1 (2Ω)
Total Power
300 W
INPUTS / FILTERS
INPUTS:
PRE IN
Filters FULL:
Yes
Lo-Pass:
65-85-115 Hz @ 12 dB/Oct.
SUBSONIC 45 Hz:
Off - 22 - 32 - Hz @ 12 dB/Oct.
BOOST 50 Hz (select):
Off / + 6 / + 9 dB
Remote Volume Controlincluded
(-50 ÷ 6) dB
Physical Specs
mm
in
A
223
8.78
B
207
8.15
C
100,5
3.96
D
76
2.99
E
43,6
1.72
HERTZ Marine 1000W 1 Channel Amplifier (Hmd1)
$1,364.99
HMD1 mono amplifier is the perfect solution to add one or more marine subwoofer to your vassel, being the ideal power extension of HMD8 DSP. At 1 Ohms it is stable and can supply up to 1000 W of power with extremely compact dimension.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage / fuse
11 ÷ 15 VDC / 2 x 30A
Operating power supply voltage
6.5 ÷ 17 VDC
Idling current
1.3 A
Idling current off
0.05 mA
Consumption @ 14.4 VDC, 2Ω, Max Musical Power
50 A
Remote IN
6.5 ÷ 15 VDC (1 mA)
ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable)
2 ÷ 7 VDC
AMPLIFIER STAGE
Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power
0.1%
Damping factor @ 1 kHz, 4Ω, 2 VRMS
140
Bandwidth @ -1.5 dB
10 Hz ÷ 500 Hz
S/N ratio (A weighted @ 1 V Input) Master Input
110 dBA
Input sensitivity Pre-In
Selectable: 0.6 - 2.0 - 6.0 VRMS
Input sensitivity Speaker-In
Selectable: 2.0 - 6.5 - 20 VRMS
Minimum load impedance
1Ω
Adjustable Crossovers
yes
Output Power
1Ch @ 4Ω
500 W
1Ch @ 2Ω
800 W
1Ch @ 1Ω
1000 W
Total Power
1000 W
INPUTS / FILTERS
Pre-In Inputs
RCA
Speaker-In Inputs
Wired
Physical Specs
Max size W x H x D (mm/inch)
243 x 48 x 1599.56 x 1.8 x 6.25
Weight (kg/lbs)
1,98 (4.36
HERTZ Marine 800W 2 Channel Amplifier (Hcp 2Mx)
$649.99
HCP 2 MX marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer.
General Specs
Channels
2 - 1
POWER SUPPLY
Power supply voltage / fuse:
11 ÷ 15 VDC / 2 x 20 A
ldling current (power ON/OFF):
0.6 A / 0.4 mA
Consumption@ 1Ω, 14.4 VDC (Max Musical Power):
20 A
Remote In:
7 ÷ 15 VDC - 1 mA
ART:
Automatic Remote Turn-OniOff with Speaker-ln
AMPLIFIER STAGE
Distorsion - TliD (100Hz @ 4Ω):
0.03%
Bandwidth:
10 ÷ 65 kHz
S/N Ratlo (A welghted @ 1 V):
105 dB
Damping factor (100Hz @ 4Ω)
300
Pre-ln sensitivity:
0.2 ÷ 5 VRMS
Speaker-ln sensitivity:
0.8 ÷ 20 VRMS
Load impedance (MIN)@2Ch:@1Ch:
2 Ω4 Ω
Max size (mm/in):
315 x 190 x 50 / 12.40 x 7.48 x 1.97
Weight (kg/lb):
2.57 / 5.66
Adjustable Crossovers
yes
Output Power
OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%
2Ch
100 W x 2 (4Ω)
2Ch
160 W x 2 (2Ω)
1Ch
320 W x 1 (4Ω)
OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%
2Ch
120 W x 2 (4Ω)
2Ch
200 W x 2 (2Ω)
1Ch
400 W x 1 (4Ω)
CEA 2006-A RATINGS
RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V):
100 W x 2 Ch
S/N Ratio (ref. 1 W output)
83 dBA
Total Power
800 W
INPUTS / FILTERS
lnputs:
PRE IN/ SPEAKER IN
Pre-out FULL
Yes
Hi-Pass:
50 ÷ 3200 Hz @ 12 dB/Oct
Lo-Pass
50 ÷ 3200 Hz @ 12 dB/Oct
Filters FULL
Yes
Hi-Pass:
50 ÷ 3200 Hz @ 12 dB/Oct
Lo-Pass
50 ÷ 3200 Hz @ 12 dB/Oct
Mono (On/Off)
Yes
Boost 50 Hz (select)
(0 / 3 / 6) dB
Physical Specs
mm
in
A
315
12.40
B
291
11.45
C
190
7.48
D
166
6.53
E
50
1.97
HERTZ Marine 1240W 1 Channel Amplifier (Hcp 1Mdk)
$944.99
HCP 1MDK mono marine amplifierfeatures latest generation D-Class 2Ω stable output stage reaching the impressive RMS power of 740 W x 1 (4 Ω). Engineered and tested for the real environment of application (UV, salt-fog, vibrations, high/low temperature, thermal shock, dust), HCP 1MDK features a compact design built from extruded aluminium heatsink with top side ensuring effective heat transfer. The special balanced input circuitry reject electro-magnetic disturbances and the Hi-Level and lo-level inputs are compatible with any source. The Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB adds more punch to subwoofer and SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. The continuously adjustable PHASE control (0 to 180°) optimizes alignment of woofer bass frequencies with sub ones. The Optional Remote Volume Control (HRC) provides the ability to adjust subwoofer volume level from the dashboard.
General Specs
Channels
1
POWER SUPPLY
Power supply voltage / fuse:
11 ÷ 15 VDC / 3 x 30 A
Idling current (power ON/OFF)
0.8 A / 1 mA
Consumption @ 2 Ω, 14.4 VDC (Max Musical Power):
45 A
Remote In:
7 ÷ 15 VDC - 1 mA
ART:
Automatic Remote Turn-On/Off with Speaker-In
AMPLIFIER STAGE
Distorsion - THD (100 Hz @ 4 Ω):
0.25%
Bandwidth:
10 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V):
100 dB
Damping factor (100 Hz @ 4 Ω):
> 100
Pre-In sensitivity:
0.2 ÷ 5 VRMS
Speaker-In sensitivity:
0.8 ÷ 20 VRMS
Load impedance (MIN)
@ 1 Ch:
2 Ω
Max size (mm / in.):
315 x 190 x 50 / 12.40 x 7.48 x 1.97
Weight (kg / lb.):
3 / 6,61
Adjustable Crossovers
yes
Output Power
Output Power (RMS) @ 14.4 VDC, THD 1%
1 Ch:
600 W x 1 (4 Ω)
1 Ch:
1100 W x 1 (2 Ω)
Output Power (RMS) @ 14.4 VDC, THD 10%:
1 Ch:
740 W x 1 (4 Ω)
1 Ch:
1240 W x 1 (2 Ω)
CEA 2006-A Ratings:
RMS Power (4 Ω, ≤1 %THD + N, 14.4 V):
600 W x 1 Ch
S/N Ratio (ref. 1 W output):
80 dBA
Total Power
1240 W
INPUTS / FILTERS
INPUTS:
PRE IN / SPEAKER IN
Pre out Hi-Pass:
50 ÷ 250 Hz @ 12 dB/Oct.
Filters FULL:
Yes
Lo-Pass:
50 ÷ 250 Hz @ 24 dB/Oct.
SUBSONIC (on/off):
25 Hz @ 24 dB/Oct.
BOOST 50 Hz (adjust):
(0 ÷ 6) dB
PHASE(adjust):
(0 ÷ 180) deg
Remote Volume Control (adjust):
(-50 ÷ 6) dB
Physical Specs
mm
in
A
315
12.40
B
291
11.45
C
190
7.48
D
166
6.53
E
50
1.97
HERTZ Marine 12" 1000W 2 Ohm Svc Rgb Charcoal Subwoofer...
$1,199.99
The new HMS 12 marine sport grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The sport grille, featuring built-in LEDs, can be easily and painted the perfect color for your vessel. The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion. Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion!
Size mm (in.)
300 (12)
Power Handling - Continuous W
500
Power Handling - Peak W
1000
Impedance Ohm
2
Depth mm (in.)
191 (7.52)
Voice Coil Type
single
No Filter Component
2Ω SPORT LED SUBWOOFER
Voice Coil Ø
65.5 (2.6)
Magnet size D x d x h mm (in.)
156 x 80 x 40 (6.14 x 3.15 x 1.57)
Weight of one component kg (lb.)
7,6 (16.8)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
D mm
265
Xmax mm
19
Re Ohm
1.8
Fs Hz
30
Le mH
0.41
Vas I
95.4
Mms g
114
Cms mm/N
0.225
BL T*m
8
Qts
1
Qes
1.1
Qms
11.1
Spl dB
89.5
A
342.9 mm
13.5 in.
B
279.4 mm
11 in.
C
192.8 mm
7.59 in.
D
140.6 mm
5.54 in.
F
52.2 mm
2.06 in.
Frequency response
HERTZ Marine 12" 1000W 2 Ohm Svc Rgb Black Subwoofer...
$734.99
The new HMS 12 marine classic charcoal grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The classi grille, features built-in LEDs. Can be easily and painted the perfect color for your vessel. The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion. Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion!
Size mm (in.)
300 (12)
Power Handling - Continuous W
500
Power Handling - Peak W
1000
Impedance Ohm
2
Depth mm (in.)
191 (7.52)
Voice Coil Type
single
No Filter Component
2Ω INFINITE BAFFLE LED SUBWOOFER
Voice Coil Ø
65.5 (2.6)
Magnet size D x d x h mm (in.)
156 x 80 x 40 (6.14 x 3.15 x 1.57)
Weight of one component kg (lb.)
7,6 (16.8)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
D mm
265
Xmax mm
19
Re Ohm
1.8
Fs Hz
30
Le mH
0.41
Vas I
95.4
Mms g
114
Cms mm/N
0.225
BL T*m
8
Qts
1
Qes
1.1
Qms
11.1
Spl dB
89.5
A
342.9 mm
13.5 in.
B
279.4 mm
11 in.
C
192.8 mm
7.59 in.
D
140.6 mm
5.54 in.
F
52.2 mm
2.06 in.
Frequency response
HERTZ Marine 10" 600W 2 Ohm Svc Rgb Charcoal Subwoofer...
$549.99
Sport grille, featuring built-in LEDs, can be easily removed to be painted with the perfect color for your vessel. HMS subwoofers are designed to be installed without the need for a dedicated enclosure delivering powerful and precise bass in any vessel.
The motor and suspension design are optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low-distortion.
Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, maximizing the overall system performance, for unlimited sound pressure and emotion!
Size mm (in.)
250 (10)
Power Handling - Continuous W
300
Power Handling - Peak W
600
Impedance Ohm
2
Depth mm (in.)
116 (4.56)
No Filter Component
2Ω SPORT LED SUBWOOFER
Voice Coil Ø
50 (2)
Magnet size D x d x h mm (in.)
140 x 60 x 30 (5.51 x 2.36 x 1.18)
Weight of one component kg (lb.)
5,1 (11.24)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
Xmech mm (in.)
±16,3 (0.64)
D mm
210
Xmax mm
12,3
Re Ohm
2,1
Fs Hz
43
Le mH
0,46
Vas I
30,46
Mms g
75,6
Cms mm/N
0,18
BL T*m
8,3
Qts
0,60
Qes
0,63
Qms
12,3
Spl dB
88,5
A
280 mm
11 in.
B
227 mm
8.93 in.
C
164 mm
6.45 in.
D
116 mm
4.56 in.
F
48 mm
1.88 in.
HERTZ Marine 10" 600W 2 Ohm Svc Black Subwoofer (Hms...
$419.99
The HMS 10 B-C 10” long-throw marine subwoofer is designed for infinite baffle applications. Its 2-ohm configuration maximizes amplifier power, relieving the main speakers from reproducing low frequencies while adding deep bass output and impact to enhance overall system performance.
The HMS 10 B-C features an optimized high-excursion motor assembly with a 50 mm (2”) voice coil, driven by a large magnetic structure to maintain precise control even at very high SPL levels.
Engineered and tested for real-world marine conditions—including UV exposure, salt fog, vibration, water spray, thermal shock, and dust—the HMS 10 B-C is built to withstand harsh environments. A progressive aramid fiber spider with silicone-insulated lead wires ensures long-term durability and consistent performance.
Corrosion-resistant gold-plated brass terminals with a protective silicone cap safeguard the wire connection point for reliable operation over time.
Size mm (in.)
250 (10)
Power Handling - Continuous W
250
Power Handling - Peak W
500
Impedance Ohm
2
Depth mm (in.)
191 (7.52)
Voice Coil Type
single
No Filter Component
2Ω SUBWOOFER
Voice Coil Ø
50 (2)
Magnet size D x d x h mm (in.)
140 x 60 x 30 (5.51 x 2.36 x 1.18)
Weight of one component kg (lb.)
5,1 (11.24)
Magnet
Ferrite
Cone
Polypropylene with UV inhibitors
Xmech mm (in.)
±16,3 (0.64)
D mm
210
Xmax mm
12,3
Re Ohm
2,1
Fs Hz
43
Le mH
0.46
Vas I
30,46
Mms g
75.6
Cms mm/N
0.18
BL T*m
8.3
Qts
0,6
Qes
0,63
Qms
12,3
Spl dB
88,5
Physical Specs
A
277 mm
10.91 in.
B
230 mm
9.06 in.
C
191 mm
7.52 in.
D
145 mm
5.71 in.
F
46 mm
1.81 in.
HERTZ Marine 10" 600W 4 Ohm Svc Black Subwoofer (Hms...
$419.99
Hertz HMS 10 B-C
The HMS 10 B long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high-level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust) HMS 10 B is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the lead wire junction point.
Product Details:
10" Single 4 ohm Hertz Marine (HMS) Series Subwoofer
Power Handling:
Peak: 500 watts
RMS: 250 watts
IP65 waterjet tested certification
UV-resistant and salt-fog tested
Polypropylene cone with UV inhibitors
Co-molded Santoprene Rubber surround
Progressive-design aramid fiber spider
Silicone-insulated lead wires construction
FEM optimized high-excursion mobile equipment
Marine-grade polymer injected basket
Gold-plated corrosion-resistant brass terminals with silicone cap
2" Copper voice coil
13.5 mm Xmax
Single Stacked Ferrite magnet motor structure
Resonance Frequency (Fs): 41 Hz
Sensitivity: 88 dB
Engineered for infinite baffle application
Recommended sealed box volume: 1.77 cubic feet
Top-mount depth: 5.71"
Cutout diameter: 9.06"
Includes protective subwoofer grille
1-year Manufacturer's Warranty
HERTZ Marine 10" 600W 4 Ohm Svc White Infinite Baffle...
$449.99
The HMS 10 B long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust ) HMS 10 B4-LD-W is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the leadwire junction point.
Size mm (in.)
250 (10)
Power Handling - Continuous W
300
Power Handling - Peak W
600
Impedance Ohm
4
Depth mm (in.)
116 (4.56)
Voice Coil Type
single
No Filter Component
SUBWOOFER
Voice Coil Ø
50 (2)
Magnet size D x d x h mm (in.)
140 x 60 x 30 (5.51 x 2.36 x 1.18)
Weight of one component kg (lb.)
5,1 (11.24)
Magnet
High density flux ferrite
Cone
Polypropylene with UV inhibitors
Xmech mm (in.)
±19 (0.75)
D mm
210
Xmax mm
13.5
Re Ohm
4.5
Fs Hz
41
Le mH
0.9
Vas I
37
Mms g
69
Cms mm/N
0.22
BL T*m
10.2
Qts
0.71
Qes
0.76
Qms
11
Spl dB
88
A
280 mm
11 in.
B
227 mm
8.93 in.
C
165 mm
6.5 in.
D
116 mm
4.56 in.
F
48 mm
1.88 in.
Frequency response
HERTZ Marine 10" 600W 2 Ohm Svc White Subwoofer (Hms...
$419.99
Product Details:
10" Single 2 ohm Hertz Marine (HMS) Series Subwoofer
Power Handling:
Peak: 500 watts
RMS: 250 watts
IP65 waterjet tested certification
UV-resistant and salt-fog tested
Polypropylene cone with UV inhibitors
Co-molded Santoprene Rubber surround
Progressive-design aramid fiber spider
Silicone-insulated lead wires construction
FEM optimized high-excursion mobile equipment
Marine-grade polymer injected basket
Gold-plated corrosion-resistant brass terminals with silicone cap
2" Aluminum voice coil
12.3 mm Xmax
Single Stacked Ferrite magnet motor structure
Resonance Frequency (Fs): 43 Hz
Sensitivity: 88.5 dB
Engineered for infinite baffle application
Recommended sealed box volume: 1.77 cubic feet
Top-mount depth: 5.71"
Cutout diameter: 9.06"
Includes protective subwoofer grille
1-year Manufacturer's Warranty
HERTZ Marine 8" (200Mm) 2-Way Rgb White Clamp Tower Coaxial...
$1,014.99
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
1. Hertz Pure Marine Certified Product stamp featuring the IP65 protection grade, ASTM-D4329 standards for UV resistance and ASTM-B117 for salt fog operability.
2. Equipped with dedicated 8” coaxial speaker featuring a long-throw 32 mm (1.26”) voice coil woofer with polypropylene cone injected with UV inhibitors and 1.4” Neodymium magnet tweeter.
3. RGB led lighting creates sophisticated atmosphere, adding tons of class to your vessel. Front RGB lighting is included built-in the front grille, while rear RGB lighting is an add-on with the specifically developed HTX RGB LOGO.1 accessory (available both in black and white color).
4. Q-OS² (Quick Orientation & Release for Sound & Safety) technology.
- Durability thanks to the solid 316 Stainless Steel construction;
- Tower can be quickly oriented within 18 steps (20° each) along horizontal axis for best sound projection and diffusion over the listening area;
- Quick Mechanical/Electrical release for security/anti-theft and cleaning;
- Multi-pole high current connection self-contained into the clamp structure;
- Clamp structure includes rubber inserts for vibrations damping and fits both round roll-bar [38 mm, 76 mm (1-1/2” to 3”)] and square roll-bar or roof mounting by detaching clamp basement upper part. Optional fitting accessories available for major OEM brands.
5. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
HERTZ Marine 8" (200Mm) 2-Way Rgb Black Clamp Tower Coaxial...
$1,014.99
Order a Quantity of 2 for a Pair, this is sold as 1 Speaker per Package
HTX 8 M-CL-W Marine Tower Coaxial Speaker (white)
Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting.
The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released.
This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology.
“Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.
Features
SALT FOG TESTED
To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
WATER JET TESTED
The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV RESISTANT
According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Specifications
Power Handling - Peak W
200
Power Handling - Continuous W
100
Impedance Ω
4
Frequency response Hz
45 ÷ 25k
Sensitivity dB SPL
91
Woofer size mm (in.)
200 (8)
Tweeter size mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter voice coil Ø mm (in.)
20 (0.8)
Woofer magnet
High density flux ferrite
Tweeter magnet
Neodymium
Woofer cone
Polypropylene with UV inhibitors
Tweeter dome
PEI
HERTZ Marine 8" (200Mm) 2-Way Total White Coaxial Speaker -...
$545.00
HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Component
HI-END COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.4)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
Physical Specs
A
225 mm
8.86 in
B
180 mm
7.09 in
C
123 mm
4.84 in.
D
91 mm
3.58 in.
F
32 mm
1.26 in
HERTZ Marine 8" (200Mm) 2-Way Total Charcoal Coaxial Speaker -...
$589.99
Hertz HMX 8 TC 8-inch Hi-End Marine Coaxial Speakers in Black (Pair)
HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.
Key Features
IP 65 Certification
Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment.
UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea.
Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.
Features
Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust).
1.4” Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL.
Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection.
Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround.
Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time.
FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket.
Sealed built-in crossover with resettable solid-state tweeter protection circuit.
Gold-plated corrosion resistant terminals.
HERTZ Marine 8" (200Mm) 2-Way Rgb Grey / White Coaxial...
$679.99
HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.
Component
HI-END LED COAX
Size mm (in.)
224 (8.8)
Power Handling - Continuous W
100
Power Handling - Peak W
200
Impedance Ohm
4
Depth mm (in.)
123 (4.84)
Tweeter diaphragm mm (in.)
36 (1.4)
Woofer Voice Coil Ø mm (in.)
32 (1.26)
Tweeter Voice Coil Ø mm (in.)
20 (0.8)
Frequency Response Hz
45 ÷ 25k
Woofer Magnet size D x d x h mm (in.)
90 x 40 x 20 (3.54 x 1.57 x 0.79)
Tweeter Magnet size D x h mm (in.)
19,7 x 3 (0.78 x 0.12)
Weight of one speaker kg (lb.)
1,66 (3.66)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Polypropylene with UV inhibitors
Dome
PEI
Xmech mm (in.)
±8,5 (0.33)
D mm
174
Re Ohm
3,1
Fs Hz
50
Le mH
0,52
Vas I
29,46
Mms g
27,3
Cms mm/N
0,37
BL T*m
6,6
Qts
0,58
Qes
0,61
Qms
11
Spl dB
91
A
225 mm
8.86 in.
B
180 mm
7.09 in.
C
128.6 mm
5.06 in
D
91 mm
3.58 in.
F
37.6 mm
1.48 in.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
