Car Audio Upgrades and Sound System Enhancements

FEATURES: JLid™ Bluetooth® Communicator for VXi Amplifiers Tune your VXi amplifier via a Bluetooth device Not for Streaming or Hands Free

Monoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω / 250 W x 1 @ 4 Ω - 14.4V Designed to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminum chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.  The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat.   Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 250 W RMS x 1 @ 3 Ω 350 W RMS x 1 @ 2 Ω 500 W RMS x 1 @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 225 W RMS x 1 @ 3 Ω 300 W RMS x 1 @ 2 Ω 400 W RMS x 1 @ 1.5 Ω N/A   General Specifications Frequency Response 7 Hz - 500 Hz (+0, -1dB) S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >1000 / 50 Hz Damping Factor @ 2 Ω >500 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 50 A (AFS, AGU or MaxiFuse™)   Signal Processing Filter Mode(s) Low-Pass only Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometer No Filter Defeat Function No Infrasonic Filter No Bass Boost EQ Yes Output Polarity Switch No Remote Subwoofer Level Control Optional (RBC-1) Remote Bass EQ Boost Control No Pass-Through Preamp Output Buffered   Physical Specifications Height (H) 2.10 in / 53 mm Width (W) 9.50 in / 242 mm Depth (D) 7.50 in / 190 mm Net Weight

The VXi amplifier ecosystem is designed to be very flexible, offering users almost limitless combinations of amplifiers and channel architectures, along with the amazing power of its integrated DSP technology. VXi-HUB is an accessory designed to simplify the control of a networked amplifier system, while greatly easing the setup process, by allowing all amplifiers to appear in a single TüN™ software session. VXi-HUB performs two distinct functions as part of a system employing two or more VXi amplifiers: data networking and digital audio distribution. Data networking is the primary function of the VXi-HUB, permitting a network of VXi amplifiers to respond to synchronized commands from a single DRC controller (DRC-100, DRC-200 or DRC-205, all sold separately). These commands can include Master Volume, Subwoofer Level, Fader, Zone Level and Preset Selection. The VXi-HUB also enables the networked VXi amplifiers to be tuned from within a single TüN™ software session, allowing the user to quickly switch between amplifiers during the tuning process, without disconnecting and connecting multiple cables. For data networking purposes, the VXi-HUB is equipped with one Master and five Slave JLid-COMM connections, permitting the networking of up to six VXi amplifiers using standard CAT5e cables (one master amplifier and five slave amplifiers). For more complex systems, two VXI-HUBs can be daisy-chained to create a network of up to ten VXi amplifiers (one master amplifier and nine slave amplifiers). VXi-HUB also includes a dedicated JLid-COMM accessory port to allow the connection of the optional VXi-BTC Bluetooth® Communicator (sold separately). This accessory enables convenient wireless setup and tuning of the entire amplifier network using a compatible iOS® or Android® device with TüN™ Mobile or TüN™ Express apps. The secondary function of the VXi-HUB is to distribute synchronous optical digital audio signals to the networked amplifiers, avoiding the delays associated with handing digital signals off through a chain of amplifiers. The optical digital audio output of a source unit connects directly to the VXi-HUB’s Optical Audio Input, which then distributes synchronous digital audio to the amplifiers from its five Optical Outputs. VXi-HUB handles S/PDIF signals up to 24 bits/192 kHz. For ease of connection, the VXi-HUB is powered via the JLid™ connection to VXI amplifiers and requires no separate power or turn-on wiring. FEATURES: JLid-COMM Connections: 1 Master Input / 5 Slave Outputs / 1 Accessory Port Optical Audio (S/PDIF) Connections: 1 Input / 5 Synchronous Outputs 3-way Configuration Switch: Standalone / Primary / Secondary Amp Identifier Status LEDs Powered via JLid™ connection to VXi amplifiers

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX400/4i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up to 200 W x 2. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 4 AWG wire) Analog Input/Pre-Out Harness Speaker Output Harness 6 ft A/B USB Cable

JL AUDIO CP210-W0V3 DUAL 10W0V3 BASSWEDGE, PORTED, 2 Ω Product highlights •Dual 10" 10W0v3-4 Loaded Ported Enclosure • 1200W Peak • 600W RMS • Top-Quality MDF Construction • Durable Dark Gray Carpet Finish • Five-Way Binding Post Connectors • Embroidered JL Audio Logo Subwoofer Features Dual 10" W0v3 Series Subwoofer Manufacturer preloaded with a JL Audio 10W0v3-4 10" Subwoofer, JL Audio's best-selling subwoofer! Power Handling:RMS: 600 watts Recommended Power Range: 150 - 600 watts Impedance: 2-Ohm Mineral-filled, polypropylene cone woofer for excellent durability Large roll surround for generous amounts of excursion Elevated frame cooling brings air directly to the voice coil Designed for compact sealed enclosures or medium-sized ported enclosures Large excursion for louder bass and less distortion DMA Optimized motor system reduces distortion and tight, clean bass Lead wire woven into spider for added strength Metallic silver frame finish 2.0" High temperature voice coil Free Air Resonance (Fs): 32.09 Hz Sensitivity: 84.07 dB Xmax: 11.4 mm Reference Efficiency (no): 0.1500% Frequency response: ~26 ~ 250 Hz Black Steel-Mesh Grille Insert Available: JL Audio SGRU-10 Matching Amplifier: JL Audio XD600/1v2 JL Audio JX500/1D Authorized Internet Dealer 2 Year Manufacturer's Warranty Enclosure Features: 10" Slot Ported MDF Subwoofer Enclosure Loaded with two 10W0v3 10" subwoofers Designed for forward, rear or down-firing installation Top-quality MDF construction Durable dark gray carpet finish Five-Way binding post connectors Embroidered JL Audio logo Embroidered "Slot-Ported BassWedge" logo on port mouth 2 Ohm final impedance Dimensions: 17-1/2"TD x 14"BD x 29-5/8"W x 13-7/8"H JL Model ComparisonFrom entry level woofers to competition grade, JL has them all. Let us find which one works for you. Model RMS Power Cone Material Surround Material Sensitivity (dB) Frequency Response Xmax (mm Terminals Made In America W7 Series 500-1500 Watts Polypropylene Foam Overroll 82.7 - 86.3 15-250 Hz 19-32 Push Terminals Yes W6 Series 600 Watts Polypropylene Rubber 82.7 - 85.4 20-200 Hz 19 Push Terminals Yes W3 Series 150-600 Watts Polypropylene Rubber 80.5-87.90 20-250 Hz 8.89-15.5 Push Terminals Yes W1 Series 150-300 Watts Polypropylene Rubber 83.9-86.1 22-200 8-11 Push Terminals W0 Series 300-500 Watts Polypropylene Foam 84-88.20 20-250 Hz 11.4-12.7 Push Terminals WX Series 200 Watts Polypropylene Foam 86-87.17 22-250 Hz 10 Spade Terminals

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX600/6i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms, producing up a rock-solid 200 W x 3. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 4 AWG wire) Analog Input/Pre-Out Harness Speaker Output Harness 6 ft A/B USB Cable

NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. With our second-generation NexD2™ technology, the VX800/8i full-range amplifier outputs up to 75 watts per channel into 4 ohms, or 100 watts into 2 ohms. It can also be bridged into 4 ohms to deliver a powerful 200 W x 4. The NexD2™ full-range technology in this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 2 AWG wire) Analog Input/Pre-Out Harness Speaker Output Harnesses (2) 6 ft A/B USB Cable

Designed to simplify great audio, every VXi amplifier combines our advanced NexD2™ switching amplifier technology with an integrated, full-featured digital signal processor. Employing our second-generation NexD2™ amplifier technology, the VX1000/5i efficiently powers a complete audio system. It can drive four main speakers with 75 W x 4 @ 4 ohms while also powering a subwoofer with up to 600W @ 2 ohms. Bridging the main channels converts it into a very powerful, 3-channel system amplifier with up to 200W x 2 @ 4 ohms on the main channels and 600W @ 2 ohms on the subwoofer channel. The NexD2™ full-range technology in the main channels of this amplifier is DSP-controlled and features a reduced loop area design utilizing DirectFET™ outputs for outstanding fidelity, very low noise and exceptional efficiency. The subwoofer channel features an optimized low-frequency variant of the NexD2™ technology. The amplifier chassis is ultra-compact, with all connections on one side, to greatly simplify installation into tight spaces. Instead of traditional control knobs and switches, all amplifier adjustments and DSP functionality are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed. INCLUSIONS: Power Connector (for 2 AWG wire) Analog Input/Pre-Out Harness Speaker Output Harness Subwoofer Output Connector 6 ft A/B USB Cable

Enclosed Subwoofer System with Single 10W0v3-4 Subwoofer, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth. Construction: MDF Recommended amplifier power: 75 - 300WNominal Impedance: 4 Ω   General Specifications Continuous Power Handling (RMS) 300 W System Nominal Impedance 4 Ω Enclosure Type Slot-ported Finish Gray carpet Grille Included No   Physical Specifications External Width (W) 15.51 in / 394 mm External Height (H) 13.77 in / 350 mm External Depth (D1) 17.38 in / 441 mm External Top Surface Depth (D2) 14 in / 356 mm Net Weight 29 lb / 13.15 kg

In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 12TW3 to deliver amazing sub-bass from an enclosure that is only 7 in. (178 mm) deep at its base and 4.5 in. (114 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω  

In this sealed Truck PowerWedge™ subwoofer system, we harness the performance of the 10TW3 to deliver amazing sub-bass from an enclosure that is only 6.25 in. (159 mm) deep at its base and 4.1 in. (104 mm) at the top. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10TW3 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with "JL AUDIO" embroidered in silver on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 400WNominal Impedance: 2 Ω

This incredible MicroSub™ subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver "JL AUDIO" embroidery on the front baffle. A steel mesh grille is included to protect the subwoofer driver. Construction: CNC-Cut High-Grade MDF Recommended amplifier power: 100 - 250WNominal Impedance: 4 Ω

While extremely compact, this amazing amplifier will comfortably drive a complete high-performance car audio system: that is, four satellite speaker systems and a subwoofer system... with a very serious 900 watts of power! Using our Single Cycle Control switching design and R.I.P.S. technology, the HD900/5 delivers 100 W x 4 to its four main channels, plus a very meaty 500 W to its subwoofer channel. Thanks to R.I.P.S., high power can be delivered over a wide range of load impedances, while the tight power supply regulation keeps distortion down, maximizing sound quality. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price. This amplifier features a brushed aluminium finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls. Main Channels @ 4 Ω 100 W RMS x 4 Main Channels @ 3 Ω 75 W RMS x 4 Main Channels @ 2 Ω 75 W RMS x 4 Main Channels @ 1.5 Ω 75 W RMS x 4 Main Channels - Bridged @ 8 Ω 200 W RMS x 2 Main Channels - Bridged @ 4 Ω 150 W RMS x 2 Subwoofer Channel @ 4 Ω 500 W RMS x 1 Subwoofer Channel @ 3 Ω 500 W RMS x 1 Subwoofer Channel @ 2 Ω 500 W RMS x 1 Subwoofer Channel @ 1.5 Ω 500 W RMS x 1

JL Audios most powerful HD amplifier employs our advanced Single-Cycle Control switching design and R.I.P.S. technology to deliver 1200 W of clean power into any impedance between 1.5 and 4 Ω, giving you the highest degree of flexibility in designing your subwoofer system. Tight power supply regulation keeps distortion down and maximizes your bass quality. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price. While targeted primarily to subwoofer applications, the HD1200/1 is a wide-range amplifier and can also be used to drive high-performance mid-range speaker systems. This amplifier features a brushed aluminium finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls. @ 4 Ω 1200 W RMS x 1 @ 3 Ω 1200 W RMS x 1 @ 2 Ω 1200 W RMS x 1 @ 1.5 Ω 1200 W RMS x 1

This ultra-compact monoblock amplifier employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 750 W of clean power into any impedance between 1.5 and 4 Ω, giving you the highest degree of flexibility in designing your subwoofer system. Tight power supply regulation keeps distortion down and maximizes your bass quality. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price. While targeted primarily to subwoofer applications, the HD750/1 is a wide-range amplifier and can also be used to drive high-performance mid-range speaker systems. This amplifier features a brushed aluminium finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls. @ 4 Ω 750 W RMS x 1 @ 3 Ω 750 W RMS x 1 @ 2 Ω 750 W RMS x 1 @ 1.5 Ω 750 W RMS x 1

JL AUDIO SB-TE-YG1/10TW1 TESLA MODEL Y STEALTHB OVERVIEW Tesla’s popular compact crossover delivers quick acceleration and a roomy cabin with plenty of space for both people and cargo. Sadly though, the factory audio options offer very little to satisfy in the bass reproduction departmen 10TW-1 SUBWOOFERS Featuring an all-fiberglass, custom-formed, sealed enclosure, this Stealthbox® houses an innovative. 10-inch TW1 thin-line subwoofer. Designed to drop into the driver’s side, rear storage compartment, this Stealthbox® solution produces amazing amounts of deep bass output, while practically vanishing into its surroundings. BUILT IN USA At a time when most audio products are built overseas, JL Audio’s commitment to in-house loudspeaker production continues to grow. To pull this off in a competitive world market, our production engineering team has created one of the world’s most advanced loudspeaker assembly facilities and established a global network of quality component suppliers who build to our specifications. This, combined with our commitment to state-of-the-art assembly technology, allows our skilled workforce to efficiently build JL Audio products to extremely high quality standards, right here in the U.S.A. INSTALL NOTES Use of driver's side, rear storage compartment is lost with installation. SPECIFICATIONS 2020-UP TESLA MODEL Y (5-SEAT) SUBWOOFERS 10TW1-2 POWER 300W RMS NOMINAL IMPEDANCE 2Ω MONO FEATURES BRAND JL AUDIO RMS POWER 300W RMS SHALLOW MOUNT YES SUBWOOFER SIZE 10"  

This compact multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality. When using the HD750/1 or HD1200/1 to drive a subwoofer system, the HD600/4 is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. From a pure sound quality perspective, we invite you to compare the real-world, in-car performance of this amplifier to any other amplifier on the market, of any type, at any price. It can also be deployed on its own as a very capable 3-channel system amplifier with 150 W x 2 to the satellites and 300 W x 1 to a subwoofer system. This amplifier features a brushed aluminum finish with black powder-coated cast alloy heat sinks and bottom panel. A black powder-coated, gasketed cover is also provided to protect the controls.

The HD-RLC remotely controls the Bass Level of the following JL Audio amplifiers: HD-Series: All modelsXD-Series: All modelsMHD-Series: All modelsM-Series: All models When the HD-RLC is connected to the above amplifiers, it acts as an attenuator on the input gain of the amplifier and is used to adjust the overall level of the amplifier from the front of the vehicle. The HD-RLC kit includes the rotary control with a black ABS knob, mounting hardware and one 18 ft. (5.5 m) cable.

C1 speakers deliver real substance and great audio performance in a format designed for easy fit behind factory grilles. To facilitate fit, spacer/adaptor rings are included, allowing the C1-570x to be installed in bottom-mount applications. The speaker baskets are also equipped with slotted mounting holes to fit into 6 x 8-inch factory speaker locations. C1 woofer drivers benefit from proprietary FEA modelling and JL Audio’s expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-570x are a proprietary, stamped, steel 5 x 7-inch (125 x 180 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-moulded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the backplate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers. Equipped with a true, edge-driven, aluminium dome tweeter, C1 speakers stand further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has an inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. A true, 2nd order high-pass filter is employed to further enhance smoothness and improve power handling. GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 50 W Peak Music Power: 225 W Recommended Amplifier Power (RMS): 10 – 75 W / Ch. System Efficiency: 90.5 dB @ 1 W / 1 m System Nominal Impedance: 4 Ω System Frequency Response: 40 Hz – 24 kHz ± 3 dB Frame Outer Diameter* (A): 5.50 x 7.63 in / 140 x 194 mm Grille Tray Outer Diameter (B): N/A Motor Outer Diameter (C): 2.76 in / 70 mm Frontal Coaxial Tweeter Protrusion** (D): 0.46 in / 12 mm Frontal Grille Protrusion (E): N/A Mounting Hole Diameter (F): N/A Mounting Depth (G): 2.46 in / 63 mm

Focal Inside Mazda BT-50 6.0 Audio Upgrade Pack - IS FORD 165 + IC FORD 165 + Impulse 4.320 - MAZDA-BT50-6.0-PACK Upgrade your Mazda BT-50's factory sound system with the Focal Inside Mazda BT-50 6.0 Audio Upgrade Pack, a complete Plug & Play solution designed to deliver clearer vocals, stronger bass response, improved detail, and greater overall audio performance without compromising your vehicle's factory appearance. Specifically developed for compatible Mazda BT-50 models, this premium audio package combines Focal's renowned IS FORD 165 component speakers, IC FORD 165 coaxial speakers, and the powerful Impulse 4.320 compact digital amplifier. Together, these components create a balanced, dynamic sound system capable of delivering exceptional clarity and listening enjoyment whether you're commuting, touring, towing, or heading off-road. The front sound stage is enhanced by the IS FORD 165 component speaker system, featuring Polyglass cone technology and aluminium inverted dome tweeters for accurate vocals, detailed midrange reproduction, and crisp high frequencies. Rear passengers benefit from the IC FORD 165 coaxial speakers, providing improved tonal balance and a fuller cabin sound experience. Powering the system is the Focal Impulse 4.320 compact digital amplifier, delivering 4 x 55W RMS for greater speaker control, cleaner output, improved dynamics, and enhanced performance at higher listening volumes. Key Features Complete Plug & Play audio upgrade for Mazda BT-50 Premium Focal speaker and amplifier package Improves clarity, bass response, and overall sound quality Front component speakers for enhanced sound staging and detail Rear coaxial speakers for balanced cabin audio Compact digital amplifier delivers clean and powerful output Maintains factory appearance and OEM integration No major modifications required on compatible vehicles Ideal for touring, towing, work, and daily driving applications What's Included IS FORD 165 – 2-Way Component Speaker Kit (Front) IC FORD 165 – 2-Way Coaxial Speaker Kit (Rear) Impulse 4.320 – Compact 4-Channel Digital Amplifier Why Upgrade Your Mazda BT-50 Audio? While the Mazda BT-50 is built for reliability, work, and adventure, the factory audio system can often lack the clarity, power, and refinement many drivers expect. This Focal Inside upgrade package addresses those shortcomings by upgrading the most important components of the audio system. The combination of premium speakers and dedicated amplification creates a more immersive listening experience with improved vocals, stronger bass, greater detail, and better balance throughout the cabin. Benefits Clearer vocals and improved speech intelligibility Enhanced bass response and musical depth Greater detail and instrument separation Improved performance at higher volume levels Balanced front and rear sound reproduction OEM-style installation and appearance Designed specifically for Mazda BT-50 applications Installation Notes Designed for compatible Mazda BT-50 vehicles Suitable for vehicles without factory amplified or premium audio systems Factory head unit integration supported Aftermarket head unit installations may require additional wiring accessories Professional installation recommended Vehicle compatibility should be confirmed before purchase Pack Summary Vehicle Mazda BT-50 Pack Type Powered Speaker Upgrade Pack Front Speakers IS FORD 165 Component Speakers Rear Speakers IC FORD 165 Coaxial Speakers Amplifier Impulse 4.320 Compact Digital Amplifier Amplifier Output 4 x 55W RMS Installation Type Plug & Play Integration SKU MAZDA-BT50-6.0-PACK

Focal Inside Ford Ranger PX1, PX2 & PX3 6.0 Audio Upgrade Pack Transform the factory audio system in your Ford Ranger PX Series with the Focal Inside Ford Ranger PX1/PX2/PX3 6.0 Pack. This complete Plug & Play audio upgrade combines premium Focal speakers, a compact digital amplifier, and vehicle-specific integration harnesses to deliver exceptional sound quality, improved clarity, and greater listening enjoyment without compromising your vehicle's factory appearance. Designed specifically for Ford Ranger PX Series 1, 2, and 3 models, this package upgrades both front and rear speakers while adding dedicated amplification for greater control, power, and dynamic performance. The result is clearer vocals, improved bass response, enhanced detail, and a more immersive listening experience whether you're commuting, touring, or heading off-road. Using Focal's renowned Polyglass cone technology and aluminium inverted dome tweeters, the speaker upgrades provide accurate sound reproduction and excellent musical detail. The included Focal Impulse 4.320 amplifier ensures the speakers perform to their full potential, delivering clean power and improved system headroom. Key Features Complete Plug & Play audio upgrade package for Ford Ranger PX1, PX2 and PX3 Upgrades front and rear factory speakers Includes dedicated Focal compact digital amplifier Vehicle-specific Ford integration harnesses included No cutting, soldering or major modifications required on compatible vehicles Improved clarity, soundstage, bass response and overall audio quality Maintains factory appearance and OEM functionality Designed for factory head unit integration Ideal for daily drivers, touring vehicles and 4WD builds Vehicle Compatibility Ford Ranger PX Series 1 Ford Ranger PX Series 2 Ford Ranger PX Series 3 What's Included IS FORD 165 – Front 2-Way Component Speaker Kit IC FORD 165 – Rear 2-Way Coaxial Speaker Kit Impulse 4.320 – Compact Digital Amplifier IW-FORDV2-YISO – Ford-Specific Y-ISO Integration Harness IMP EXTENSION I/O 150 – Amplifier Extension Harness IW-PWSUP600 – Amplifier Power Supply Cable Pack Benefits Enhanced front-stage clarity and vocal definition Improved rear cabin audio performance Greater amplifier control and speaker efficiency Stronger bass response and dynamic range Cleaner sound at higher listening volumes Balanced sound throughout the vehicle cabin OEM-style installation with minimal vehicle modification Why Upgrade Your Ford Ranger Audio? While the Ford Ranger PX is one of Australia's most popular utes, many owners find the factory sound system lacks the clarity, power, and detail expected from a premium audio experience. The Focal Inside 6.0 Pack addresses these shortcomings by upgrading the key components responsible for overall sound quality. With premium Focal speakers handling front and rear audio duties and a dedicated amplifier providing clean power delivery, this package creates a richer, more detailed listening experience while maintaining factory integration and reliability. Installation Notes Designed for compatible Ford Ranger PX1, PX2 and PX3 vehicles Suitable for factory head units only Not compatible with factory premium amplified audio systems Aftermarket head unit installations may require additional wiring accessories Professional installation recommended Vehicle compatibility should be confirmed before purchase Recommended For Ford Ranger owners seeking improved sound quality Touring and 4WD enthusiasts Daily drivers wanting better clarity and performance Users looking for a complete Plug & Play speaker and amplifier upgrade Customers wanting premium audio without custom fabrication Pack Summary Vehicle Ford Ranger PX1 / PX2 / PX3 Pack Type Powered Speaker Upgrade Pack Front Speakers IS FORD 165 Component Speakers Rear Speakers IC FORD 165 Coaxial Speakers Amplifier Focal Impulse 4.320 Integration Harnesses IW-FORDV2-YISO, IMP EXTENSION I/O 150, IW-PWSUP600 Installation Type Vehicle-Specific Plug & Play

JL AUDIO CS113TG-TW5V2SINGLE 13TW5V2 TRUCK POWERWEDGE, SEALED, 2 Product highlights • 13.5" Loaded PowerWedge Truck Enclosure• 1200W Peak• 600W RMS• Comes Equipped with One JL Audio 13TW5-3v2 TW5 Thin-Line Subwoofer• High Grade Black Carpet Finish• Five-Way Binding Post Connectors Product Features:         13-1/2" TW5 (Thin-Line) Series Shallow Mount Subwoofer Power Handling: RMS: 600 watts Recommended Power Range: 250 - 600 watts Impedance: 2-Ohm Mica-filled polypropylene cone Santoprene surround Cast alloy basket 7-inch diameter voice coil Unique design allows for small airspace requirements Requires only 0.8 cubic feet of airspace 13% greater linear excursion capability over previous model Redesigned motor features an annular vent DMA-optimized motor designs   Patented floating cone attach method" technology Patented concentric tube architecture "Tab-Ear" frame design to fit driver in tight spaces Precision-built in USA at JL Audios Miramar, Florida factory Sensitivity: 85.63 dB Xmax: 11 mm Reference Efficiency (no): 0.2300% Frequency response: ~20 ~ 200 Hz Matching Amplifiers: JL Audio XD600/1v2 JL Audio 600/1v3 Authorized Internet Dealer 2 Year Manufacturer's Warranty General Enclosure Features: PowerWedge Sealed Truck Enclosure V-Groove MDF Construction advanced cabinet-building technique uses CNC machining to create precise panel joints Delivers world-class sub-bass fidelity Provides a detailed and smooth response High grade black carpet finish Five-Way binding post connectors Embroidered JL Audio logo JL Audio ECS internal wiring Steel mesh grille provides excellent woofer protection Designed to fit perfectly behind the seats of trucks Final Impedance: 2 ohm Weight: 34 lbs Dimensions: 4-1/2"TD x 7-1/4"BD x 21-1/4"W x 15-3/4"H Warranty and Return Policy Parts Warranty Duration 2 years Labor Warranty Duration 2 years Warranty Provider Manufacturer

FOCAL VW GOLF POWERED 6.2 PACK PLUG & PLAY SPEAKER UPGRADE Front: IS VW 165 Component KitRear: IS VW 155 Coaxial KitSubwoofer: ISUB TWINAmplifier: Impulse 4.320 2×55 Watts RMS to Front Speakers and 2×80 Watts RMS@2 Ohm to Subwoofer.Harnesses: IW IMP 2.1, IW-VW YISO HARNESS.   FRONT: The IS VW 165 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution. The speaker drivers employ Polyglass technology, which delivers well-defined midrange and bass. The sound is natural and without coloration. The Aluminium inverted dome tweeter, a Focal technology, provides perfect treble reproduction in every direction. In addition, tweeter mounting foams and anti-vibration foams are included for a perfect set up. REAR: The IS VW 155 2-way component kit is designed for all drivers who want to replace their original audio system with a hi-fi quality sound solution. The speaker drivers employ Polyglass technology, which delivers well-defined midrange and bass. The sound is natural and without coloration. The Aluminium inverted dome tweeter, a Focal technology, provides perfect treble reproduction in every direction. In addition, tweeter mounting foams and anti-vibration foams are included for a perfect set up. SUBWOOFER: The pair of ISUB TWIN passive subwoofers drastically improves the impact of the bass in an in-car audio installation, specifically thanks to the double ferrite speaker drivers and heavy-duty, tough aluminium cone. The front grilles promote optimum sound dispersion throughout the cabin.These ultra-compact subwoofers are quick and easy to install too, without any car modifications required. They slide comfortably underneath the seats* and are super easy to attach, with no tools required, using the self-adhesive strips provided. However, it is also very easy to screw them to the floor if you so wish.We recommend powering the ISUB TWIN with amplifier Impulse 4.320, its two front channels will remain available to connect a pair of speaker drivers in the front doors, for example. AMPLIFIER: Give your head unit a breath of fresh air. Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution. It will give your installation a boost without you having to embark on a difficult installation process. HARNESSES: The Focal Inside VOLKSWAGEN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Volkswagen original head unit and of Focal Inside extension cables. The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring.

JL AUDIO MICROSUB CP110LG-TW1-2 300 WATT RMS SINGLE 10" 10TW1-2 SUBWOOFER Product Highlights • Preloaded with single 10TW1-2 Subwoofer• Nominal Impedance: 2-ohms• Black, high-grade automotive carpet with silver embroidery• Efficient slot-ported design and precise tuning of its 10TW1 subwoofer• Sensitivity: 82.2 dB 1 watt / 1 meter General Features: Single 10" Vented Subwoofer Enclosure Preloaded with single 10TW1-2 Subwoofer RMS Power Rating: RMS: 300 watts Recommended power range: 75 - 300 watts RMS Nominal Impedance: 2 Ω Extensive interior bracing Steel mesh grille included Black, high-grade automotive carpet with silver embroidery Flared port entry and exit for enhanced sound quality Five-way binding post terminals for easy installation Precision-built in USA at JL Audio’s Miramar, Florida factory Long linear excursion capability (0.40 in / 10 mm, one-way) Efficient slot-ported design and precise tuning of its 10TW1 subwoofer Matching JL Audio Amplifier: JL Audio JX250/1 JL Audio XD300/1v2 - ✔ Preferred Match Authorized Internet Dealer 2 Year Manufacturer's Warranty General Specifications: Injection molded, mica-filled polypropylene cone Rubber surround No pole vent: permits mounting close to rear wall of enclosure DMA-optimized motor design Patented concentric tube architecture Patented floating cone attach method technology Cast alloy frame with flat edges for tight driver grouping Construction: CNC-Cut High-Grade MDF One-Way Linear Excursion (Xmax): 0.40 in / 10.0 mm Sensitivity: 82.2 dB 1 watt / 1 meter Enclosure Dimensions: 6.375" D x 20.875" W x 13.250" H Warranty and Return Policy Parts Warranty Duration 2 years Labor Warranty Duration 2 years Warranty Provider Manufacturer Item Details Manufacturer: JL AUDIO Model Number: CP110LG-TW1-2 Weight: 25.25lbs Internal SKU: cp110lgtw12

GENERAL SPECIFICATIONSContinuous Power Handling (RMS): 600 WSystem Nominal Impedance: 2 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: NoPHYSICAL SPECIFICATIONSExternal Width (W): 31.375 in / 797 mmExternal Height (H): 15.18 in / 386 mmExternal Depth (D1)L 20.3 in / 516 mmExternal Top Surface Depth (D2): 15.75 in / 400 mmNet Weight: 60.3 lb / 27.35 kg

GENERAL SPECIFICATIONS Continuous Power Handling (RMS): 300 WSystem Nominal Impedance: 4 ΩEnclosure Type: Slot-portedFinish: Gray carpetGrille Included: No PHYSICAL SPECIFICATIONSExternal Width (W) 16.31 in / 414 mmExternal Height (H) 15.18 in / 386 mmExternal Depth (D1) 20.3 in / 516 mmExternal Top Surface Depth (D2) 15.75 in / 400 mmNet Weight 33.1 lb / 15 kg

Steel mesh grille inserts for select JL Audio 10-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's rubber gasket ring.

Steel mesh grille insert for select JL Audio 8-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer's grille receiver ring.

C7 is the pinnacle of JL Audio automotive loudspeaker design, benefiting from our most advanced development tools and a complete commitment to precision manufacturing. The C7-100ct component tweeter is designed to deliver unparalleled high-frequency performance. Utilizing a corundum ceramic-coated aluminium alloy diaphragm suspended via treated silk, s-roll surround, it provides spectacularly detailed reproduction of treble frequencies with an outstanding off-axis response. Distortion and non-linearities have been minimized through critical optimization of dynamic motor and suspension behaviours. Passive crossover networks are not included with C7 drivers, as they are designed for active systems. Instead, we recommend a high-quality tuning DSP, such as the JL Audio TwK™ 88 or D8, and a dedicated amplifier channel for each C7 loudspeaker in the system. Precise setup of equalization, delay and crossover filters will ensure optimal in-vehicle performance. Sold individually, with flush and surface mounting fixtures and hardware. One 15μF tweeter protection capacitor is also included. DESIGN FEATURES: Dome Diaphragm: Corundum ceramic-coated aluminium alloy diaphragm exhibits high stiffness, very low mass and excellent environmental stability. It also helps the tweeter dome to hold its shape and operate as a true piston at higher frequencies, without a penalty in moving mass. Suspension Design: The diaphragm’s motion is centred, sprung and damped by treated silk, s-roll surround. Ferrofluid in the magnetic gap acts as a rear suspension element in this design. The two combine to provide optimum damping without unduly restricting excursion. Motor Design: The C7-100ct employs a high-density magnetic circuit with a neodymium magnet and U-Yoke motor topology. An under-hung voice coil is employed, wound with copper-clad aluminium wire onto an aluminium voice coil former. Motor magnetics have been precisely optimized utilizing advanced FEA tools to lower even-order distortion and IMD/AMD. Acoustical Design: The shape of the tweeter housing is designed to boost sensitivity in a very specific bandwidth, helping to flatten the frequency response. It also provides improved control of directivity. DESIGN BANDWIDTH: With 48 dB/octave filters: 3,000 Hz – 30,000 Hz With 24 dB/octave filters: 4,000 Hz – 30,000 Hz With 12 dB/octave filters: 5,000 Hz – 30,000 Hz GENERAL SPECIFICATIONS: Continuous Power Handling (RMS): 100 W Peak Music Power: 200 W Recommended Amplifier Power (RMS): 50 - 150 W / Ch. Nominal Impedance: 4 Ω Frequency Response: 3 kHz - 30 KHz ± 3 dB Voice Coil Resistance (Re): 3.20 Ω Free Air Resonance (Fs): 1450 Hz Reference Efficiency (no): 0.267% Efficiency: 86.5 dB @ 1W / 1m | 92.5 dB @ 1W / 0.5m Sensitivity: 89.5 dB @ 2.83V / 1m Flush Mount Fixture Diameter (A1): 2.13 in / 54 mm Surface Mount Fixture Diameter (A2): 2.16 in / 55 mm Flush Mount Mounting Hole Diameter (B): 1.88 in / 48 mm Flush Mount Mounting Depth (C): 0.73 in / 19 mm Flush Mount Tweeter Frontal Protrusion (D1): 0.33 in / 8 mm Surface Mount Tweeter Frontal Protrusion (D2): 1.06 in / 27 mm

The TwK™ 88 is a state-of-the-art digital signal processor engineered to deliver world-class system tuning capabilities in an easy-to-use format. Equipped with an advanced 24-bit DSP processor, the TwK™ 88 includes flexible input/output options, 80 total bands of equalization and powerful mixing tools. The included DRC-200 Digital Remote Controller offers dual level controls, toggles up to six presets, and has an LED indicator. Control the TwK™ 88’s entire feature set by connecting it to your PC via USB, using the companion TüN™ Software interface. FEATURES: Flexible input design with 8 differential-balanced, line-level analog inputs (RCA), accepting line-level signals up to 7.1V (RMS) Separate optical (Toslink) and coaxial digital inputs for connection to digital S/PDIF sources Flexible input mixer allows input channels to be combined with full control over each input’s level and polarity 8 banks of 10-band graphic or parametric equalizers with configurable EQ assignment Powerful crossover section with fully variable, high-pass and low-pass filters, crossover slopes are selectable from 6 dB/octave to 48 dB/octave (in 6 dB/octave increments) Configurable polarity and delay settings, with separate entries for speaker distance plus offset control; fully linkable with other channels, in any combination, for adjustment Precise output level controls, adjustable in 0.5 or 0.1 dB increments, fully linkable with other channels, in any combination 8 analog, line-level RCA output jacks (4V RMS) Optical (Toslink) output jack provides a pass-through digital audio (S/PDIF) signal from any pair of input channels, with no signal processing applied Remote turn-on output (+12VDC) for activating aftermarket audio equipment JLid™ Port allows connection of the included DRC-200 Digital Remote Controller to add dual configurable level controls, preset selection and LED status reporting from the driver's seat SPECIFICATIONS: Power Supply Type: Regulated DC-DC SMPS Input Operating Voltage: 10 - 16 VDC Standby Current Draw: <1.5 mA Operating Current Draw: 0.7 A Recommended Fuse Value: 1 A Input Channels: 8 Input Type: Line-level, Differential-Balanced Input Voltage Range: 250 mV - 7.1 V RMS Minimum Input Voltage: 10 mV RMS Input Level Setting: 11 discrete selections from 250 mV - 7.1V RMS Output Channels: 8 Analog Output: Unbalanced, stereo RCA jacks Digital Output: Optical (Toslink) output (S/PDIF) Output Impedance: 450 Ω Latency Analog - Analog: 5.425 mS Latency Analog - Optical: 5.470 mS Latency Optical - Optical: 4.860 mS Latency Optical - Analog: 4.805 mS S/N Ratio: 98 dB (A-Weighted, referred to 4V RMS Output) THD+N @ Rated Output: 0.02% (20 Hz - 20 kHz) Audio Resolution: 24 bit / 48 kHz Number of EQ Bands: 10 x 8 Channels Remote Level Control: Included (DRC-200) Remote Level Functions: Master Volume Control + Trim; Master Volume Control + Fader; Zone Control, LED Status Reporting

The FiX™ 82 is a state-of-the-art digital signal processor engineered to deliver world-class sound from factory audio systems, without replacing the OEM source unit. The FiX™ 82 is the first DSP to automatically correct time delayed factory outputs prior to signal summing and EQ correction. With a powerful 24-bit DSP processor and dual 1/3 octave equalizers onboard, complex 2-way, 3-way and 4-way factory audio outputs are combined and level-matched automatically into a flat, full-range stereo signal. Differential-balanced inputs accept virtually any OEM analog audio signal, from low-voltage, line-level to high-power, amplified speaker-level outputs (up to 30V RMS). Calibration is initiated with just a single button press and takes only about 30 seconds to complete, with no special equipment needed! By connecting a PC running TüN™ Software via USB, you can also access a complete suite of diagnostic panels that show the frequency response of input signals, as well as the corrected outputs. Adjustments can be made to input polarity, muting, and filtering, and new calibrations can be initiated from the PC as well. By clicking on the “TUNE” tab of the TüN™ interface, you can also access a pair of user-adjustable, 10-band, graphic equalizers to fine-tune the output signals. Output options include dual RCA jacks (4V RMS) or a digital optical (Toslink) output, supporting PCM audio (S/PDIF) at 24 bit/48 kHz resolution. Activation methods include 12-volt or automatic (Signal/DC-Offset Sensing), plus a dedicated remote turn-on output for activating your aftermarket equipment. Connect the optional DRC-100/205 Digital Remote Controller (sold separately) to add Master Volume Control capabilities from the driver’s seat. Clipped input signals and overall condition are also reported via the DRC-100’s multi-colour status LED. Achieving great sound from your factory stereo has never been easier, or sounded better. GENERAL SPECIFICATIONS: Power Supply Type Regulated DC-DC SMPS Input Operating Voltage 10 – 16 VDC Standby Current Draw <1.5 mA Operating Current Draw 0.7 A Recommended Fuse Value 1 A Input Channels Eight Input Type Differential-Balanced Input Voltage Range 250 mV – 30 V RMS Minimum Input Voltage 10 mV RMS Input Level Setting Fully automatic Output Channels Two Analog Output Unbalanced, stereo RCA jacks Digital Output Optical (Toslink) output (S/PDIF) Output Impedance 450 Ω S/N Ratio 96 dB (A-Weighted, referred to 4V RMS Output) THD+N @ Rated Output 0.02% (20 Hz – 20 kHz) Audio Resolution 24 bit / 48 kHz Number of EQ Bands 30 x 2 channels EQ Resolution 1/3 octave (25 Hz – 20 kHz) Remote Level Control Optional (DRC-100) Remote Level Functions Master Volume Control, Handsfree Optimization, LED Status Reporting Height (H) 1.85 in / 47 mm Width (W) 4.29 in / 109 mm Depth (D) 6.14 in / 156 mm Net Weight 2.58 lb / 1.17 kg

Somebody finally paid attention and designed a no-nonsense, back-to-basics sports car that puts the emphasis on driving enjoyment. Now all you need to do is add a healthy dose of JL Audio to ratchet up the listening enjoyment and make every drive even more memorable. Our patented 10TW3 thin-line driver is the engine inside this Stealthbox® system, and it produces spectacular results from its perch in the passenger side rear corner of the trunk. Your trunk remains completely useful and your installation is neat and secure. A grille is also included to protect your investment. GENERAL SPECIFICATIONS: Contains one 10TW3-D4 subwoofer in a sealed enclosure 400-watt power handling Wired for 2-ohm mono Installs in the passenger side of the trunk compartment Black steel mesh woofer grille is included

The latest all-American pony car gets a big dose of horsepower and major technology enhancements, all packaged in a new sleek and sexy body. Sadly though, the stock audio systems just can’t deliver enough bass to keep up with the Mustang’s high-performance muscle. Our Stealthbox® features an all-fibreglass, sealed enclosure design that fits in the same location as the optional factory subwoofer (and requires no holes to be drilled for installation). Equipped with our revolutionary 12TW3 thin-line subwoofer, this Stealthbox delivers deep, powerful bass that’s worthy of your Mustang’s heritage. GENERAL SPECIFICATIONS: Contains one 12TW3-D4 in a sealed enclosure 400-watt power handling. Wired for 2-ohm mono Installs in the passenger side rear corner of the trunk Factory subwoofer (if equipped) must be removed for installation of Stealthbox® Installation in Mustang Shelby GT350 models requires relocation of additional OEM equipment Will not fit convertible models

Some factory audio amplifiers employ a load detection circuit that looks for a low-impedance load in order to enable audio output. When a high-impedance load, like the input section of a FiX™ DSP, is connected to these factory amplifiers, the audio signal will mute. The FiX-LSA-4 is designed to provide a low enough load impedance to enable audio output in most of these situations. Simply disconnect the input connectors from the FiX™ DSP, insert the FiX-LSA-4 in-line and recalibrate with the FiX-LSA-4 in place. Note: An additional FiX-LSA-4 will be necessary if your FiX™ is connected to more than four channels of audio from your OEM head unit or amplifier.

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker. The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 89.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 50 Hz - 25 KHz ± 3 dB

The DRC-205 is a panel-mount, wired digital remote controller designed to connect to the JLid™ port of compatible JL Audio electronics. The specific audio functionality of the DRC-205 controller will be determined by the device it is connected to. COMPATIBLE WITH: FiX™ OEM Integration DSP: All models TwK™ System Tuning DSP: All models VXi-Series Amplifiers: All models FUNCTIONS: Dual-concentric rotary controls with stops Push-button mode selector Status indicator (RGB LED) COMMON USES INCLUDE: Master Volume Subwoofer Volume Preset or Mode Selection

There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application. Many people mistakenly believe that an oval speaker cannot perform as well as around one, leading to many instances of 5.25-inch speakers being installed into 5 x 7-inch openings. JL Audio has put in the engineering time and effort to create fantastic-sounding speakers that drop into oval openings and deliver equivalent performance to our 6.5-inch (165 mm) round speaker systems... guaranteed. So, don't make the mistake of losing cone area and efficiency by stepping down to a smaller round speaker... these ovals are as impressive as our round format systems. The C3-570 system features 5 x 7 / 6 x 8-inch (125 x 180 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-moulded polymer baskets. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures. C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations! Woofer grilles are not available for this product. Sonic character: Clean and Powerful Sold as a pair. Continuous Power Handling (RMS) 75 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 25 - 150 W / Ch. System Efficiency 90.0 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 48 Hz - 25 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer deigns. The C2-600 system features 6-inch (150 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modeling systems. The 6-inch (150 mm) format is a direct fit in many Japanese vehicles where a full-size 6.5-inch speaker (165 mm) will not fit without modification. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6-inch (150 mm) speaker. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair. Continuous Power Handling (RMS) 60 W Peak Music Power 225 W Recommended Amplifier Power (RMS) 15 - 100 W / Ch. System Efficiency 90.5 dB @ 1 W / 1 m System Nominal Impedance 4 Ω System Frequency Response 59 Hz - 22 KHz ± 3 dB

The Evolution C2 systems deliver sparkling high-frequency detail, smooth mid-range and powerful mid-bass, thanks to real silk dome tweeters and long linear excursion woofer designs. The C2-525 system features 5.25-inch (130 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio's vast woofer design experience and advanced modelling systems. The C2 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. C2 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Three levels of tweeter attenuation are provided, as well as a tweeter protector. Woofer grilles are included, each consisting of a black grille tray with satin silver accents and a black steel mesh grille with an electroformed JL Audio logo. Sonic character: Clean and Dynamic Sold as a pair.

The DRC-100 is a panel-mount, wired digital remote controller designed to connect to the JLid™ port of compatible JL Audio electronics. The specific audio functionality of the DRC-100 controller will be determined by the device it is connected to. COMPATIBLE WITH: FiX™ OEM Integration DSP: All models VXi-Series Amplifiers: All models FUNCTIONS: Rotary knob with stops Push-button mode selector Status indicator (RGB LED) COMMON USES INCLUDE: Master Volume Subwoofer Volume Preset or Mode Selection

Focal TWU1.5 Aluminium/Magnesium Inverted Dome Tweeters - TWU1.5 Enhance your vehicle's audio system with the Focal TWU1.5 Tweeters, a premium high-frequency upgrade designed to deliver exceptional clarity, detail, and accuracy. Developed and manufactured in France, these compact tweeters feature Focal's renowned aluminium/magnesium inverted dome technology, providing natural treble reproduction and an extended frequency response for a truly immersive listening experience. Part of the acclaimed Focal Integration Series, the TWU1.5 tweeters are engineered for universal compatibility and custom installations. Whether you're upgrading an existing Focal system, enhancing factory speakers, or building a complete custom audio setup, these tweeters offer remarkable flexibility and outstanding acoustic performance. With multiple mounting options and a compact design, the TWU1.5 allows seamless integration into virtually any vehicle while maintaining a clean OEM-style appearance. The result is wider sound dispersion, improved stereo imaging, and greater musical detail across every genre. Key Features Designed and developed in France Aluminium/Magnesium inverted dome tweeter technology Extended 4kHz – 21kHz frequency response 94dB sensitivity for excellent efficiency Four mounting options for maximum installation flexibility Natural, accurate, and detailed sound reproduction Excellent stereo imaging and soundstage enhancement Compatible with factory and aftermarket audio systems Ideal for Focal Integration and Universal Series upgrades Sold as a pair Why Upgrade with TWU1.5 Tweeters? Factory tweeters often lack the detail and precision needed to reproduce high frequencies accurately. The Focal TWU1.5 delivers cleaner vocals, sharper instrument detail, and a wider soundstage, helping reveal nuances in your music that standard speakers can miss. Designed to integrate effortlessly into a variety of vehicle applications, these tweeters provide a significant improvement in overall system performance while maintaining tonal balance and listening comfort. Flexible Mounting Options Flush Mount Installation Angled Surface Mount Installation Flat Surface Mount Installation Behind Factory Grille Integration Benefits Improved vocal clarity and detail Extended high-frequency response Enhanced stereo imaging and soundstage Natural and balanced sound signature Suitable for OEM and aftermarket systems Simple integration into virtually any vehicle Specifications Product Type: Tweeters Tweeter Design: Inverted Dome Tweeter Material: Aluminium/Magnesium RMS Power Handling: 15W RMS Maximum Power Handling: 100W Impedance: 4 Ohm Sensitivity: 94dB Frequency Response: 4kHz – 21kHz Surround Material: Poron Voice Coil Diameter: 0.8" Mounting Type: Surface Mount Grilles Included: Yes Net Weight: 40g More Information Product Type Tweeters Series Focal Integration Tweeter Material Aluminium/Magnesium Tweeter Design Inverted Dome RMS Power 15W Maximum Power 100W Impedance 4 Ohm Sensitivity 94dB Frequency Response 4kHz - 21kHz Surround Material Poron Voice Coil Diameter 0.8" Mounting Type Surface Mount Grilles Included Yes Net Weight 40g Vehicle Compatibility Universal Sold As Pair Country of Design France What's Included 2 x Focal TWU1.5 Tweeters Surface Mount Hardware Flush Mount Hardware Installation Accessories Protective Grilles Installation Instructions

The next in line after our passive 2-way kit 165W-RC, a leading product heralded for its performance for several years now, the 165W-XP integrates our exclusives technologies: TMD® surround, progressive spider, ventilated motor, new Beryllium tweeter, bi-amplification crossover. We also gave it a new design, steeped in our DNA and geared towards performance. The result: an uncompromising kit that opens the door to the world of Utopia. THE BEST OF FOCAL TECHNOLOGIES 'W' sandwich coneThe ‘W’ sandwich cone perfectly optimises the frequency response curve by fully mastering the three key parameters of lightness, rigidity and damping. When listening through the ‘W' sandwich cone, the sound is completely transparent with extremely little distortion. TMD® surround Originally developed for the Sopra line of high-fidelity loudspeakers, our TMD® (Tuned Mass Damper) surround has a unique profile, designed to better control the effects of resonance and to drastically reduce the distortion associated with deformations of the cone. The speaker driver takes advantage of this patented technology by spreading better defined and very realistic midranges.Progressive spiderThe progressive spider used on all our Utopia drivers is built around a progressive section that reproduces all the impact of the bass whilst optimising the linearity, precision and dynamics of the sound.Bi-amplification crossover All the components on our crossover have been specially selected and optimised to better control the effects of thermal dissipation. These components, essential for managing different channels and the soundstage, have improved reliability. As for the bi-amplification, this enables the woofer and tweeter to be driven separately in terms of power, resulting in optimum performance.  Type Separated 2-way passive kit Tweeter Beryllium Inverted dome Woofer (6 1/2") 165mm Cone 'W' Suspension Tuned Mass Damper (TMD®) Impedance 2Ω Max. power 200W Nom. power 100W Sensitivity (2.83 V/1 m) 93dB Frequency response 60Hz - 40kHz Accessories Grilles, screws and filters supplied TWEETER  6.5" WOOFER 

Focal 8 WM Utopia M 8" Woofer Speaker Driver The Focal 8 WM is one of the most versatile speaker drivers in the Utopia M Series, engineered to deliver exceptional performance across an impressively wide frequency range. Designed and manufactured in France, this premium 8-inch woofer combines Focal's latest acoustic innovations to provide powerful bass, outstanding dynamics, and remarkably detailed midrange reproduction. At the heart of the 8 WM is Focal's patented M-profile "W" sandwich cone, paired with the renowned TMD® (Tuned Mass Damper) surround technology. Together, these advanced technologies ensure exceptional rigidity, low distortion, and superb tonal accuracy across the speaker's operating range. Capable of extending deep into the bass frequencies while maintaining excellent upper-midrange performance, the 8 WM integrates seamlessly with the Focal 3.5 WM midrange driver or TBM tweeter, making it a perfect foundation for custom high-end audio systems. With its shallow mounting depth, lightweight aluminium basket, and signature red neodymium motor, the 8 WM combines stunning aesthetics with reference-grade acoustic performance, making it ideal for premium OEM-style and custom vehicle installations. Key Features Designed, developed and manufactured in France Premium 8" Utopia M woofer speaker driver Patented M-profile "W" sandwich cone technology TMD® (Tuned Mass Damper) surround technology Wide operating frequency range for system versatility High-performance red neodymium motor Shallow mounting depth for installation flexibility Rigid aluminium basket design Excellent bass performance and midrange integration Compatible with custom Utopia M audio systems Unrivalled Sound Performance The 8 WM is engineered to deliver powerful low-frequency output while retaining exceptional detail and accuracy throughout the upper bass and midrange frequencies. Its advanced cone geometry and suspension technologies allow it to operate across a wide frequency band, creating seamless transitions between subwoofers, midrange drivers, and tweeters. Whether used in an active or passive configuration, the 8 WM provides the control, dynamics, and musicality expected from a flagship Utopia M component. Benefits Deep, controlled bass response Outstanding midbass impact and dynamics Wide frequency coverage for flexible system design Exceptional tonal balance and realism Low distortion and excellent transient response Compact design for custom installations Premium French engineering and craftsmanship Specifications Product Type: Woofer Speaker Driver Speaker Size: 8" (200mm) Cone Material: M-Profile "W" Sandwich Cone Surround Technology: TMD® (Tuned Mass Damper) Motor Structure: Neodymium Voice Coil Diameter: 80mm (3.1") RMS Power Handling: 100W RMS Maximum Power Handling: 200W Impedance: 4 Ohm Sensitivity: 91.8dB Frequency Response: 45Hz – 5kHz Mounting Depth: 52mm Cut-Out Diameter: 200mm Weight: 1200g Surround Material: TMD® Suspension More Information Product Type Woofer Speaker Driver Series Focal Utopia M Speaker Size 8" (200mm) Cone Material M-Profile "W" Sandwich Cone Motor Type Neodymium Voice Coil Diameter 80mm (3.1") Surround Technology TMD® (Tuned Mass Damper) RMS Power 100W Maximum Power 200W Impedance 4 Ohm Sensitivity 91.8dB Frequency Response 45Hz - 5kHz Cut-Out Diameter 200mm (8") Mounting Depth 52mm (2") Weight 1200g Mounting Hardware Included Speaker Grilles Optional Country of Manufacture France

IW PSA YISO HARNESS | Plug & Play Adapter for Citroën, DS & Peugeot | Impulse 4.320 Compatible   Seamless Integration. Factory Fit. Focal Precision. The Focal IW PSA YISO HARNESS is a dedicated Plug & Play head unit adapter engineered for Citroën, DS Automobiles, and Peugeot vehicles. Designed specifically for the Focal Impulse 4.320 amplifier, it provides an effortless, OEM-grade connection between your vehicle’s original head unit and Focal Inside extension cables. This precision-built harness allows fast and secure installation—no cutting, soldering, or modification required. Its ISO-standard connectors ensure a perfect fit and clean signal transfer, making it the ideal solution for achieving superior amplified sound while preserving your vehicle’s factory wiring integrity. Key Features • Designed for the Focal Impulse 4.320 digital amplifier• Plug & Play connectivity for Citroën, DS Automobiles & Peugeot• OEM-grade connectors for factory-fit reliability• Quick, clean installation – no soldering required• Direct link from head unit to amplifier• Length: 0.9ft (0.3m)• Compatible with vehicles manufactured since 2014 Note: Plug & Play harnesses are designed for use with factory head units only. For aftermarket systems, please use a standard wiring kit. Focal IW PSA YISO – Factory Integration. Amplified by Focal.

Focal 6 WM Utopia M 6.5" Woofer Speaker Driver Designed to deliver uncompromising performance in a compact package, the Focal 6 WM is a premium 6.5-inch woofer developed as part of the flagship Utopia M Series. Combining cutting-edge acoustic technologies with elegant French design, the 6 WM offers exceptional dynamics, remarkable detail, and outstanding tonal accuracy for high-end custom car audio systems. Engineered and manufactured in France, the 6 WM incorporates Focal's renowned M-profile "W" sandwich cone, patented TMD® (Tuned Mass Damper) surround technology, progressive spider design, and a powerful red neodymium motor. Together, these technologies deliver highly controlled bass and midbass reproduction with minimal distortion, excellent transient response, and impressive musical realism. The unique aluminium basket design draws inspiration from modern French architecture, combining structural rigidity with a compact installation depth. The result is a speaker that performs at the highest level while remaining suitable for a wide range of custom vehicle applications. As part of the Utopia M modular concept, the 6 WM can be combined with other Utopia M tweeters, midrange drivers, and subwoofers to create a fully customised audiophile-grade sound system tailored to your vehicle and listening preferences. Key Features Designed, developed and manufactured in France Premium 6.5" Utopia M woofer speaker driver Patented M-profile "W" sandwich cone technology TMD® (Tuned Mass Damper) surround technology Progressive spider for improved dynamics and linearity High-performance red neodymium motor Rigid aluminium basket inspired by French architecture Exceptional midbass detail and tonal accuracy Compact mounting depth for installation flexibility Compatible with custom Utopia M audio systems Outstanding Performance The 6 WM benefits from Focal's most advanced speaker technologies, delivering precise, neutral, and highly detailed sound reproduction. The M-profile "W" cone provides an ideal balance of rigidity, damping, and low mass, while the TMD® surround minimises distortion and unwanted resonance. The result is clean, dynamic bass and midbass performance that integrates seamlessly with Utopia M midrange and tweeter drivers. Benefits Exceptional bass and midbass accuracy Outstanding transient response and dynamics Wide frequency response for flexible system design Low distortion and excellent tonal balance Premium French engineering and craftsmanship Ideal for active and passive high-end installations Part of the fully customisable Utopia M ecosystem Specifications Product Type: Woofer Speaker Driver Speaker Size: 6.5" (165mm) Cone Material: M-Profile "W" Sandwich Cone Surround Technology: TMD® (Tuned Mass Damper) Motor Structure: Neodymium Voice Coil Diameter: 3.14" RMS Power Handling: 100W RMS Maximum Power Handling: 200W Impedance: 4 Ohm Sensitivity: 91.5dB Frequency Response: 60Hz – 6kHz Surround Material: Butyl More Information Product Type Woofer Speaker Driver Series Focal Utopia M Speaker Size 6.5" (165mm) Cone Material M-Profile "W" Sandwich Cone Surround Technology TMD® (Tuned Mass Damper) Motor Type Neodymium Voice Coil Diameter 3.14" RMS Power 100W Maximum Power 200W Impedance 4 Ohm Sensitivity 91.5dB Frequency Response 60Hz - 6kHz Surround Material Butyl Cut-Out Diameter 165mm Mounting Depth 51.5mm Weight 1050g Country of Manufacture France Optional Accessories Dedicated Utopia M 6.5" Aluminium Speaker Grille Utopia M Midrange Drivers Utopia M Tweeters Utopia M Subwoofers What's Included 1 x Focal 6 WM Utopia M Woofer Speaker Driver Mounting Hardware Installation Documentation

Focal 3.5 WM Utopia M 3.5" Midrange Speaker Driver Experience extraordinary midrange precision with the Focal 3.5 WM, a premium 3.5-inch midrange speaker driver developed for the flagship Utopia M Series. Combining advanced acoustic technologies with exceptional French craftsmanship, the 3.5 WM delivers lifelike vocals, remarkable detail, and seamless integration into high-end custom car audio systems. At the heart of the 3.5 WM is Focal's patented M-profile "W" sandwich cone, engineered to provide the ideal balance of rigidity, lightness, and damping. This advanced cone technology ensures ultra-linear frequency response, low distortion, and outstanding sound dispersion, creating a natural and immersive listening experience. Further enhancing performance is Focal's patented TMD® (Tuned Mass Damper) surround technology, which minimises unwanted resonance and improves tonal accuracy throughout the critical midrange frequencies. Combined with a progressive spider and powerful neodymium motor, the 3.5 WM reproduces vocals and instruments with exceptional realism, dynamics, and precision. Designed, developed, and hand-built in Saint-Étienne, France, the 3.5 WM represents the pinnacle of Focal's acoustic expertise and forms an integral part of the Utopia M à la carte system concept, allowing enthusiasts to create a fully customised reference-grade audio system. Key Features Designed, developed and hand-built in France Premium 3.5" Utopia M midrange speaker driver Patented M-profile "W" sandwich cone technology TMD® (Tuned Mass Damper) surround technology Progressive spider for improved dynamics and linearity High-performance neodymium motor Wide frequency response for seamless system integration Exceptional vocal clarity and instrument realism Compact design for custom installation flexibility Part of the Focal Utopia M modular speaker range Why Choose the 3.5 WM? The midrange frequencies are where most of the musical information exists, making the quality of a midrange driver critical to overall system performance. The Focal 3.5 WM is engineered to reproduce vocals and instruments with remarkable accuracy, realism, and emotion. Its advanced cone geometry, low-distortion suspension technologies, and powerful motor structure allow it to perform with exceptional clarity and precision, even in demanding automotive environments. Benefits Ultra-natural vocal reproduction Outstanding instrument detail and realism Excellent transient response and dynamics Wide sound dispersion and imaging Low distortion throughout the midrange spectrum Perfect integration within active or passive Utopia M systems Premium French engineering and craftsmanship Specifications Product Type: Midrange Speaker Driver Speaker Size: 3.5" (87mm) Cone Material: M-Profile "W" Sandwich Cone Suspension Technology: TMD® (Tuned Mass Damper) Motor Structure: Neodymium RMS Power Handling: 50W RMS Maximum Power Handling: 100W Impedance: 4 Ohm Sensitivity: 88dB Maximum SPL: 85dB Peak @ 1m Frequency Response: 200Hz – 10kHz Suspension Material: Butyl More Information Product Type Midrange Speaker Driver Series Focal Utopia M Speaker Size 3.5" (87mm) Cone Material M-Profile "W" Sandwich Cone Suspension Technology TMD® (Tuned Mass Damper) Motor Type Neodymium RMS Power 50W Maximum Power 100W Impedance 4 Ohm Sensitivity 88dB Maximum SPL 85dB Peak @ 1m Frequency Response 200Hz - 10kHz Suspension Material Butyl Mounting Depth 31mm Cut-Out Diameter 87.5mm Weight 250g Grilles Included Optional Mounting Hardware Included Yes Country of Manufacture France What's Included 1 x Focal 3.5 WM Utopia M Midrange Speaker Driver Mounting Brackets Installation Screws Installation Accessories

Focal 8WM Utopia M 8" Speaker Driver Grille - 8WM GRILLE Designed specifically for Focal Utopia M 8-inch midrange speakers, the 8WM Grille combines premium protection with the distinctive styling of Focal's flagship Utopia M range. Engineered for seamless integration into high-end custom audio installations, this grille preserves speaker performance while adding a refined finishing touch to your vehicle's interior. Manufactured using a 100% chemical etching process and complemented by a precision aluminium trim ring, the 8WM Grille incorporates the unique "M" profile that defines the Utopia M series. The result is an elegant, acoustically transparent grille that protects your speaker while maintaining the exceptional sound quality expected from a premium Focal system. Whether you're completing a competition-grade audio build or a premium OEM-style installation, the 8WM Grille provides the ideal combination of protection, aesthetics, and acoustic performance. Key Features Designed specifically for Focal Utopia M 8-inch midrange speakers Premium speaker protection without compromising sound quality 100% chemical-etched grille construction Precision aluminium trim ring Distinctive Utopia M "M" profile design Acoustically transparent construction Seamless integration into custom installations Enhances the appearance of premium audio systems Developed to complement the Utopia M range Sold individually Why Choose the 8WM Grille? Premium audio components deserve premium protection. The 8WM Utopia M Grille helps safeguard your speaker investment while preserving the sophisticated aesthetics and acoustic integrity of your audio system. Its carefully engineered design allows sound to pass freely while protecting the speaker from accidental contact and damage, making it ideal for both show vehicles and daily-driven applications. Benefits Protects speaker cones from accidental damage Maintains optimal acoustic performance Matches the styling of the Utopia M range Creates a clean, professional installation finish Durable construction for long-term reliability Ideal for custom and OEM-style installations Specifications Product Type: Speaker Driver Grille Speaker Compatibility: Focal Utopia M 8" Midrange Speakers Construction: 100% Chemical-Etched Metal Grille Trim Ring Material: Aluminium Design Profile: Utopia M Signature "M" Profile Acoustic Transparency: Yes Installation Type: Protective Speaker Grille Sold As: Individual Grille More Information Product Type Speaker Driver Grille Speaker Size Compatibility 8" (200mm) Series Compatibility Focal Utopia M Construction Method 100% Chemical Etching Trim Ring Material Aluminium Design Profile Utopia M "M" Profile Acoustic Transparency Yes Installation Type Protective Speaker Grille Vehicle Compatibility Universal Custom Installations Sold As Individual Unit What's Included 1 x Focal 8WM Utopia M 8" Speaker Driver Grille Aluminium Trim Ring Installation Components

Focal 6.5" Utopia M Speaker Driver Grille - GRILLE6.5 Protect your premium Utopia M speakers while maintaining their exceptional acoustic performance with the Focal 6.5" Utopia M Speaker Driver Grille. Designed specifically for compatible Focal Utopia M 6.5-inch speaker applications, this premium grille combines elegant styling with durable protection, making it the perfect finishing touch for high-end custom audio installations. Manufactured using Focal's advanced chemical etching process and complemented by a precision CNC-milled aluminium ring, the grille reflects the distinctive design language of the Utopia M range. Its acoustically transparent construction helps protect the speaker driver from accidental damage without affecting sound quality, ensuring your system performs exactly as intended. Whether you're completing a custom installation or adding extra protection to an existing Utopia M setup, this grille provides a refined OEM-style appearance while preserving the premium aesthetics of your audio system. Key Features Designed specifically for Focal Utopia M 6.5" speaker drivers Developed and manufactured in France Premium protection for high-end speaker installations 100% chemical-etched grille construction CNC-milled aluminium trim ring Acoustically transparent design Maintains speaker performance and sound quality Complements the Utopia M design language Ideal for custom and OEM-style audio installations Sold individually Why Choose a Utopia M Speaker Grille? Premium speaker systems deserve premium protection. The Focal Utopia M grille helps safeguard your speaker investment while preserving the clean, sophisticated appearance expected from a flagship audio system. Its precision-engineered construction provides an ideal balance of durability, aesthetics, and acoustic transparency, allowing your speakers to perform at their best while remaining protected from everyday wear and accidental damage. Benefits Protects speaker cones from accidental damage Maintains optimal acoustic performance Enhances the appearance of custom audio installations Matches the premium aesthetics of the Utopia M range Durable aluminium construction Suitable for OEM-style and custom installations Specifications Product Type: Speaker Driver Grille Speaker Compatibility: Focal Utopia M 6.5" Speakers Construction: Chemical-Etched Metal Grille Trim Ring Material: CNC-Milled Aluminium Acoustic Design: Acoustically Transparent Installation Type: Speaker Protection Grille Country of Design: France Sold As: Individual Grille More Information Product Type Speaker Driver Grille Speaker Size Compatibility 6.5" (165mm) Series Compatibility Focal Utopia M Construction Method 100% Chemical Etching Trim Ring Material CNC-Milled Aluminium Acoustic Transparency Yes Installation Type Protective Speaker Grille Vehicle Compatibility Universal Custom Installations Country of Design France Sold As Individual Unit What's Included 1 x Focal 6.5" Utopia M Speaker Driver Grille CNC-Milled Aluminium Trim Ring Installation Components

Steel mesh grille insert for select JL Audio 12-inch subwoofer drivers. Provide attractive, sturdy protection to your subwoofer driver with this fine steel mesh grille insert, powder-coated in a satin black finish. The insert is designed to fit snugly onto the woofer’s grille receiver ring.