TORQIT Pedal Torq To Suit Ford, Jeep & Mazda -...
$399.00
PEDAL TORQ PLUS FOR DS RAM 1500, 5.7L: 2009-2018
A refined version of the Pedal Torq, this completely wireless throttle controller improves throttle response by modifying the signal sent to your Ram’s ECU. Controlled via Bluetooth with our Torqit Connect app, its adjustable settings allow you to fine-tune the DS 1500 Ram’s accelerator to match your driving preferences.
Does your vehicle feel slow and sluggish when towing or carrying heavy roads? The Pedal Torq Plus will give you total control over the accelerator, eliminate throttle lag, and reduce engine strain. Ideal for heavy vehicles with upgrades, towing, and standard vehicles experiencing lag, the Pedal Torq Plus creates a smoother driving experience and helps you optimise your vehicle’s response straight off the mark.
The Pedal Torq Plus is the ultimate set-and-forget unit, providing you with eight different driving profiles to complement any driving style and terrain. It transforms your vehicle’s response when towing and on-road and improves traction in any off-road situation, whether on the sand, soft dirt, rocks, or mud. With adjustable settings in each mode, you have total control over the level of throttle response required for your driving style and terrain.
As the first Bluetooth throttle controller in Australia, the Pedal Torq Plus is wirelessly operated via the Torqit Connect App. Designed in Australia and manufactured in Germany; the Torqit App provides ongoing updates to guarantee your vehicle is always fitted with the most recent technology.
For more details regarding the various driving modes, click the instructions tab.
REMOTE CONTROL KEY FOB
Using Torqit’s key fob remote control, you can switch between modes on your Pedal Torq Plus at the touch of a button. The key fob is a great way to alter your vehicle’s response without needing to use your phone whilst driving. An added bonus of the key fob is that if your vehicle has multiple drivers, the person driving it can easily change the settings to suit their preferences.
PEDAL TORQ PLUS INSTALLATION
Fitting your Pedal Torq Plus is a simple plug-and-play process that takes less than 60 seconds. After downloading the Torqit Connect App, detach your accelerator’s factory plug and install the new harness. Once you have added your device to the Torqit App, you can begin to wirelessly adjust the settings.
PEDAL TORQ PLUS FEATURES
Eliminate throttle lag and sluggish behaviour
Ideal for towing and when under load
Includes eight driving profiles with adjustable settings
Wireless Bluetooth/ key fob control
Keeps your dash clear
Receive ongoing updates with the latest technology via the Torqit Connect App
Fast and simple installation
Five-year product warranty
FATZ FABRICATION High Flow Airbox For V6 Ra Ford Ranger...
$1,390.00
The RA Rangers 3L V6 Diesel engine at a stock power output of 184kW is a very impressive unit and the fitment of a Fatz built Airbox will only compliment and enhance the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 9” long element, optioned in either an 8-layer gauze or paper element. The RA Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, Off Road filter designed and tested for all the duties you will put your Ranger through. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all V6 RA ranger vehicles. The RA Airbox incorporates our latest generation of MAF sensor integration with our CNC machined MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION High Flow Airbox For V6 Ra Ford Ranger...
$1,390.00
The RA Rangers 3L V6 Diesel engine at a stock power output of 184kW is a very impressive unit and the fitment of a Fatz built Airbox will only compliment and enhance the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 9” long element, optioned in either an 8-layer gauze or paper element. The RA Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, Off Road filter designed and tested for all the duties you will put your Ranger through. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all V6 RA ranger vehicles. The RA Airbox incorporates our latest generation of MAF sensor integration with our CNC machined MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions. *Snorkel compatibility only guaranteed with Fatz Built snorkel at release of product.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Px 2.0 L Bi Turbo Airbox. Dry Element...
$1,520.00
The Ford PX Ranger series 3 Rangers 2L bi-turbo engine is a very impressive unit for its size and the fitment of a Fatz built Airbox and plumbing package will only compliment the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 7” long element, either in an 8-layer gauze or paper element. The 2l Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel as well as a water deflector plate so water cannot hit the filter directly when taken in. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all Ford PX Ranger 3, 2L ranger models including Raptor. The 2L Airbox incorporates our latest generation of MAF sensor integration with our CNC machines MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions, mounting hardware, 3” 90degree silicone bend, joining pipe for silicone bends, 3”- 2.75” reducing silicone bend, Hose clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Px 2.0 L Bi Turbo Airbox. Oiled Air...
$1,520.00
The Ford PX Ranger series 3 Rangers 2L bi-turbo engine is a very impressive unit for its size and the fitment of a Fatz built Airbox and plumbing package will only compliment the OEM Hardware. Our Airbox utilizes our Fatz built Air filters in a 7” long element, either in an 8-layer gauze or paper element. The 2l Ranger Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel as well as a water deflector plate so water cannot hit the filter directly when taken in. This package will not only improve aesthetic of you engine bay, but will provide excellent filtration for Off-road use, allow easy plumbing in of Snorkels, provide a free flowing intake system that will support power upgrades. Compatible with all Ford PX Ranger 3, 2L ranger models including Raptor. The 2L Airbox incorporates our latest generation of MAF sensor integration with our CNC machines MAF housing for accurate and neat MAF integration. All plumbing supplied for a bolt in solution.
Kit includes: Airbox with filter, Clear lid, instructions, mounting hardware, 3” 90degree silicone bend, joining pipe for silicone bends, 3”- 2.75” reducing silicone bend, Hose clamps as required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Px 3.2L Airbox. Dry Element Air Filter. No...
$1,450.00
PX Ranger series 1- 3. 3.2L.
With tuning and powder supporting modules available for the 3.2L Ford PX Ranger, it makes sense to supplement these components with a free flowing, well filtering intake system for your vehicle. Our Airbox utilizes our Fatz built Air filters in a 7” long element, either in an 8-layer gauze or paper element. Our 3.2l Ford PX Ranger Airbox includes all the design features that make Fats built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel as well as a water deflector plate so water cannot hit the filter directly when taken in. Built in 3mm Aluminium and sporting out CNC machined MAF housing. Supplied with our clear lid for easy checking of filter soiling. This box re-uses the factory plumbing to the turbo inlet so no further cost is incurred for fitment of the Airbox.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Px 3.2L Airbox. Oiled Air Filter. No Plumbing...
$1,390.00
PX Ranger series 1- 3. 3.2L.
With tuning and powder supporting modules available for the 3.2L Ford PX Ranger, it makes sense to supplement these components with a free flowing, well filtering intake system for your vehicle. Our Airbox utilizes our Fatz built Air filters in a 7” long element, either in an 8-layer gauze or paper element. Our 3.2l Ford PX Ranger Airbox includes all the design features that make Fats built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel as well as a water deflector plate so water cannot hit the filter directly when taken in. Built in 3mm Aluminium and sporting out CNC machined MAF housing. Supplied with our clear lid for easy checking of filter soiling. This box re-uses the factory plumbing to the turbo inlet so no further cost is incurred for fitment of the Airbox.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Dry Element Air Filter. No...
$1,450.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Np300 Navara Airbox. Oiled Air Filter. No Plumbing...
$1,450.00
Np300/D23 Fatz Built Airbox
The Fatz Built D23 Navara Airbox is inline with all our current design standards. Incorporating our CNC machined MAF housing, all aluminium construction and mounting on factory mounting rubbers. This D23 Navara Airbox has a Unique design feature, with dual intake location. This allows for compatibility with Safari, TJM and Fatz Built snorkels. With the ECU location from factory, this needs to be re-located for fitment of most snorkels. We have an allowance on the rear of the Airbox, for mounting of the ECU, in a secure and protected manor. Supplied in all cases with our Fatz Built 7″ Filter in either an oiled Gauze or paper element. A very basic install for anyone with basic mechanical knowledge.
Please note: Rendered images are for product representation only. Surface finish and general appearance may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Gu Patrol Airbox. Oiled Air Filter. No Plumbing....
$1,130.00
GU Patrol 4″ High Flow Airbox
Our GU Patrol 4″ High flow Airbox is a versatile unit with great compatibility in many common set ups. With GU Patrol 4” inlet and outlet, supplied with our Fatz Built filter in your choice of either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, template for enlarging the hole through the inner guard and fitting instructions supplied with the box. The box incorporates a water trap and duck valve drain, to allow water to drain away from the filter when ingested through the snorkel. The box is compatible with dual batteries with no modification to the box or tray. Simply select your plumbing kit (sold separately) to allow fitment with many common Engine combinations such as TD42, ZD30, RD28, LS1-3 etc. Not compatible with TB48 or TB45 without modifications. With an increase in flow from 410CFM with the factory box to Over 850CFM* with our High Flow Airbox, the improvements will be obvious. Supplied in all cases with filter, template for guard hole enlargement, clear lid, fasteners and instructions to fit out.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Hdj70 Series Airbox. Dry Air Filter. Incorperates Washer...
$1,280.00
HDJ79/HZJ75 Series 4″ Airbox
Our Toyota HDJ75 / HDJ79 series Airbox is a high flow alternative for the Factory airbox. Built in 3mm aluminum this airbox has 4” inlet and outlets, utilizes our 9” pod filter in either an 8 Layer gauze or paper element, Picks up on factory mounting locations utilizing rubber mountings, has a clear Perspex lid for easy checking of filter soiling and has a water drain tank and duck style drain in the base of the box to allow water to drain after entering the snorkel. The box also incorporates a windscreen washer tank which removes the factory unit for easier installation and clean aesthetic. This box can be supplied with a plumbing kit for common applications (sold separately., refer drop down options) for an all inclusive install solution. Purchase Fatz Fabrication’s Toyota HDJ75 / HDJ79 series 4″ Airbox and experience the difference.
Plumbing Kits Designed for 1HD-Fte engines. 1HZ Turbo Charged configurations will differ. Please contact us for further information.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Hdj70 Series Airbox. Oiled Air Filter. Incorperates Washer...
$1,280.00
HDJ79/HZJ75 Series 4″ Airbox
Our Toyota HDJ75 / HDJ79 series Airbox is a high flow alternative for the Factory airbox. Built in 3mm aluminum this airbox has 4” inlet and outlets, utilizes our 9” pod filter in either an 8 Layer gauze or paper element, Picks up on factory mounting locations utilizing rubber mountings, has a clear Perspex lid for easy checking of filter soiling and has a water drain tank and duck style drain in the base of the box to allow water to drain after entering the snorkel. The box also incorporates a windscreen washer tank which removes the factory unit for easier installation and clean aesthetic. This box can be supplied with a plumbing kit for common applications (sold separately., refer drop down options) for an all inclusive install solution. Purchase Fatz Fabrication’s Toyota HDJ75 / HDJ79 series 4″ Airbox and experience the difference.
Plumbing Kits Designed for 1HD-Fte engines. 1HZ Turbo Charged configurations will differ. Please contact us for further information.
Supplied in all cases with filter, clear lid, fasteners and instructions to fit out.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION N80 Hilux Series Airbox. Oiled Air Filter. Includes...
$1,760.00
Fatz High Flow N80 Hilux Airbox
The Fatz built N80 Airbox incorporate our CNC machined MAF housing to retain factory air flow readings, a filter of your choice (8 layer oiled gauze or dry element paper in a 9 inch POD configuration), clear acrylic lid for a great look and easy checking of filter soiling. The box incorporates a duck valve drain to allow water to drain away from the filter, when ingested through the snorkel for peace of mind motoring. Mounting the airbox is taken care of by the factory mounting rubbers and fasteners. Plumbing from the air box outlet to the turbo inlet is comprised of silicone couplings and powder coated alloy pipe supplied as part of the kit.
Supplied in all cases with filter, clear lid, plumbing from airbox to turbo inlet pipe in silicone and alloy pipe, and instructions to install.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION 200 Series Airbox. Oiled Air Filter. Includes Plumbing...
$1,850.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION 200 Series Airbox. Oiled Air Filter. Includes Plumbing...
$1,760.00
200 Series Airbox Package.
An Airbox upgrade is a must have on all 200 series vehicles, with dusting issues being common place across the range of 200 series models. An Airbox is cheap insurance to avoid costly damage. Also allowing a free-flowing intake system at the same time.The Standard Airbox does cause a flow restriction when tuning above the 30psi boost range. Fatz built Airboxes incorporate our machined MAF housing to retain factory air flow readings, a filter of your choice in either an 8 layer oiled gauze or dry element paper in a 9 inch POD configuration. Supplied with plumbing from the air box outlet to the factory inlet, clear acrylic lid for a great look and easy checking of filter soiling. All the required hardware, fittings and hose clamps to install the air box.It is designed as a direct factory replacement utilizing the rubber mounts found on the factory air box. We provide detailed installation instruction and installation takes about 30 minutes. Compatible with most snorkel brands and can be supplied with Inlet adapters for some snorkel variants (Select options).
Please Note: Rendered images are for representation of the product only, some surface finishes and appearances may differ from rendered images.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Plumbing Kit From Fatz Airbox To G-Turbo Intake...
$350.00
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Plumbing Kit From Fatz Airbox To Maf Inlet....
$350.00
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec...
$1,130.00
3.25″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 3.25″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 3.25" Inlet For Factory, V-Spec...
$1,130.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
FATZ FABRICATION Vdj70 Rh Airbox. 4" Inlet For Fatz Or...
$1,130.00
4″ Airbox & Plumbing Package for all VDJ70 series Models fitted with 1VD-FTV engine.
The Legendary VDJ 70 Series Land cruiser has become an icon for workers and 4×4 enthusiasts alike. With such a focus on modification and improvements, our Induction products can help with your vision for either. The factory airbox has a widely known issue for allowing dust bypass, and is something that needs to be rectified. Our Airbox will filter better, flow more and allow for additions of common performance products or general under bonnet accessories on the market. Our Airbox picks up on factory mounting locations so no drilling or cutting is required. Has compatibility with common front mount kits, such as PDI. We include the required bracketry and hoses to re-locate the power steering reservoir (required to fit out box with some additional items fitted to engine bay). Our VDJ 70 series Airbox includes all the design features that make Fatz built Airboxes a first choice for off road vehicles. With water trap and drain valve for dispersing water drawn in through the snorkel, as well as a water deflector plate so water cannot hit the filter directly when taken in. Our Airbox has a flow capacity of 1080CFM* (with 4″ inlet) with the filter and hardware installed, compared to the Factory Airbox with 680CFM. The box is supplied with a filter of your choice (8-layer oiled gauze or dry element paper in a 9-inch POD configuration) both are an excellent choice for off-road application. Supplied with our Standard plumbing kit to the factory MAF Sensor inlet.
(*Air Flow data should be used comparative reference data only. Comparison carried out on the same flow bench on the same day for accurate reference. These may not absolute values).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
