Torqit
MAXIMIZE POWER TORQIT 3" BACK EXHAUST MITSUBISHI MQ TRITON (PICK UP ONLY)
$1,521.00
$1,690.00
Enhance your vehicle's performance with top-tier stainless steel Torqit DPF Back Exhaust. Suit Mitsubishi MQ Triton. Unleash the power.
Lightforce
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
$45.00
LIGHTFORCE BEAST 230MM CLEAR SPOT FILTER- F230BEASTSC
Lightforce’s unique Modular Filter System has been applied to the new Beast LED Driving Light. The Clear Spot Filter adds even more protection over the moulded Beast lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Specifications
Colour: Clear
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
Lightforce
LIGHTFORCE BEAST 230MM AMBER SPOT FILTER-F230BEASTSA
$45.00
Lightforce’s unique Modular Filter System has been applied to the new BEAST LED Driving Light.
The Amber Spot Filter adds even more protection over the moulded BEAST lens and the bezel from road debris and impacts, without affecting the driving light's beam pattern.
Amber filters are ideal for drivers who require less glare when driving and for those who drive in dusty road conditions.
Other filter options for BEAST include spot clear & black cover.
Sold as: 1x BEAST Amber Spot Filter
Product specifications:
Colour: Amber
Beam Pattern: Spot
Size: 230mm
Material: Polycarbonate
(F230BEASTSA)
Front Runner
Front Runner TYRE Inflate 830 REQU329
$129.00
$143.00
Quickly get your tyres up to their optimum pressures with the OSRAM TYREinflate 830. Thanks to the 4-metre power cable, it can easily access all four tyres and just plugs into your vehicle's 12V socket. This is great for driving on soft sand, gravel, or rocks, where you must deflate and inflate tyres.
The OSRAM TYREinflate 830 has been specially developed for use with larger vehicles and their tyres, making it ideal for cars, caravans, motorhomes, off-road vehicles, minibuses and vans.
This tyre inflator can inflate a 13" tyre in approx. 2 minutes and a 22" tyre in approx. 5 minutes.
The auto stop function and the deflator valve help to keep the tyres optimally inflated.
This can also reduce the risk of over- or under-inflation and the resulting possible damage to the tyres.
The TYREinflate 830 has a 4-metre power cable for the accessibility to all four tyres and plugs directly into your vehicle's 12-volt socket.
The backlit LED display and integrated LED light provide improved readability of the pressure settings and improved illumination of the working area even in reduced visibility conditions or at night.
Also included are three adapters for inflating sports balls and other small inflatables and a storage bag to protect the unit and store it neatly.
OSRAM offers a 2-year guarantee on this product.
Based on inflating a 13” tyre from flat to 2.4 BAR /22” tyre from flat to 2.6 bar.
Measurements of the tyre pressure and inflation of the tyres to the optimum tyre pressure must always be conducted on cold tyres.
Consists of:1 x Large Vehicle Digital Tyre InflatorInstallation HardwareFitting Instructions
Product Dimensions:250mm (9.84") L x 150mm (5.9") W x 100mm (3.93") HWeight:2.6kg (5.7lbs)
Special Notes:180W12VGuarantee: 2 yearsSupplier SKU: OTI830
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY SNORKEL. POWDER COATED SATIN BLACK. SUIT FATZ 4"...
$1,990.00
Fatz Built RA/Next Gen Ranger 4″ Snorkel
The Ford Ranger keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this vehicle. The short entry design of our 4″ Snorkel makes it a breeze to install, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we cap the factory inlet and create a new entry through the side of the airbox, located in an ideal location for snorkel coupling. A laser-cut plate ensures a watertight seal of the factory location, while the bead-rolled inlet pipe offers secure connection. The RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs within the factory mounting location and fill point. With everything you need included, our kit leaves no question marks over the installation process or whether you have all required for installation. Take your Ford Ranger Next Gen RA to the next level and breathe easy with the Fatz Built 4″ snorkel. Add our Airbox for V6 Model variants for a complete induction package. Contact one of our team members if you have any queries.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY SNORKEL. POWDER COATED SATIN BLACK. SUIT FACTORY AIRBOX...
$1,990.00
Fatz Built RA/Next Gen Ranger 4″ Snorkel
The Ford Ranger keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this vehicle. The short entry design of our 4″ Snorkel makes it a breeze to install, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we cap the factory inlet and create a new entry through the side of the airbox, located in an ideal location for snorkel coupling. A laser-cut plate ensures a watertight seal of the factory location, while the bead-rolled inlet pipe offers secure connection. The RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs within the factory mounting location and fill point. With everything you need included, our kit leaves no question marks over the installation process or whether you have all required for installation. Take your Ford Ranger Next Gen RA to the next level and breathe easy with the Fatz Built 4″ snorkel. Add our Airbox for V6 Model variants for a complete induction package. Contact one of our team members if you have any queries.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY RAM HEAD SNORKEL. POWDER COATED TEXTURE BLACK. SUIT...
$1,880.00
Fatz Fabrication RA Ranger Short Entry RAM HEAD Snorkel. Powder coated Texture Black. Suit Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-RM-TPC-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY RAM HEAD SNORKEL. POLISHED. FACTORY AIRBOX INLET. INCLUDES...
$1,820.00
Fatz Fabrication RA Ranger Short Entry RAM HEAD Snorkel. Polished. Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-RM-POL-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY RAM HEAD SNORKEL. POWDER COATED SATIN BLACK. SUIT...
$1,880.00
Fatz Fabrication RA Ranger Short Entry RAM HEAD Snorkel. Powder coated Satin Black. Suit Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-RM-SPC-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY SNORKEL. POLISHED. FACTORY AIRBOX INLET. INCLUDES WASHER BOTTLE.-FFRA-SNRH-POL-FAB
$1,820.00
Fatz Fabrication RA Ranger Short Entry Snorkel. Polished. Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-POL-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA FORD RANGER SHORT ENTRY SNORKEL. POWDER COATED SATIN BLACK. SUIT FACTORY AIRBOX...
$1,880.00
Fatz Fabrication RA Ranger Short Entry Snorkel. Powder coated Satin Black. Suit Factory Airbox inlet. Includes Washer bottle.-FFRA-SNRH-SPC-FAB
The Ford Ranger Next Gen (RA) keeps evolving, and the RA raises the bar again with even higher standards of refinement. We’ve engineered a professional solution for every aspect of snorkel installation on this beauty. The short entry design makes it a breeze to fit, seamlessly matching the A-pillar’s lines and enhancing the overall aesthetics. Since the factory inlet sits at the front of the airbox, we ingeniously cap it and create a new entry through the alternate factory location on the side. A laser-cut plate ensures a watertight seal, while the bead-rolled inlet pipe offers secure connection. Now, the RA’s washer bottle resides in the guard cavity, requiring relocation during the snorkel installation. But fear not! We’ve got you covered with a pre-fabricated, powder-coated aluminum bottle that looks like it belongs right there in the engine bay. It even uses the factory filler neck and gasket for a truly OEM feel. With everything you need included, our kit leaves no question marks, just the freedom to conquer any terrain with confidence. So, take your Ford Ranger Next Gen RA to the next level and breathe easy with our professional snorkel solution. Contact one of our team members if you have any queries
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION PX RH RAPTOR SNORKEL. POWDER COATED SATIN BLACK. SUIT BI TURBO 2.0L, COUPLING...
$1,390.00
Fatz Fabrication PX RH Raptor Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L, coupling to Fatz Airbox -FFPX-SNRH-SPC-RPT3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel. Polished. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-POL-FAB2
$1,420.00
Fatz Fabrication PX RH Snorkel. Polished. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-POL-FAB2
. Series 1-3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L Factory Adaption...
$1,480.00
Fatz Fabrication PX RH Snorkel. Powder coated Satin Black. Suit Bi Turbo 2.0L Factory Adaption Included-FFPX-SNRH-SPC-FAB2
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel. Polished. suit 3" Airbox inlet (Fatz & Factory 3.2)-FFPX-SNRH-POL-3
$1,330.00
PX Ranger 3" Snorkel. Series 1-3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication PX RH Snorkel Powder coated Satin Black. suit 3" Airbox inlet (Fatz &...
$1,390.00
PX Ranger 3" Snorkel. Series 1-3
The Ford PX Ranger is one of the most weld rounded and well finished vehicles within their segment. With Performance to match their appearance. Our snorkels are designed to fit in a way to complement your vehicle and supply all the Airflow you could possible need. Built with 304 Grade Stainless steel for powder coated finish and 316 for polished finished snorkels, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Compatible with Ford PX Ranger, Series 1-3, the snorkel recesses into the guard to allow the snorkel to follow the body lines of the vehicle and the A pillar. Supplied in all cases with plumbing to the Airbox. If fitting to the Factory Airbox on the 2L, the factory inlet is blanked off and an adaption pipe is supplied to create a new inlet in a favorable location for plumbing to the snorkel. (For Ranger Raptor, Select specific product)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Single Cab Exhaust, Turbo Back for DPF Models (Single fuel tank). SIDE...
$2,720.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Single Cab Exhaust, Turbo Back for DPF Models (Single fuel tank). SIDE...
$2,820.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Dual Cab Exhaust, Turbo Back for DPF Models (Single fuel tank). SIDE...
$2,720.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Dual Cab Exhaust, Turbo Back for DPF Models (Single fuel tank). SIDE...
$2,820.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Exhaust, Turbo Back for DPF Models (Single fuel tank). Without Muffler ....
$4,895.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Exhaust, Turbo Back for DPF Models (Single fuel tank). With Muffler. DUAL...
$4,995.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Exhaust, Turbo Back for DPF Models (Single fuel tank). Without Muffler ....
$3,895.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Exhaust, Turbo Back for DPF Models (Single fuel tank). With Muffler. Single...
$3,995.00
Our 79 Series landcruiser Turbo back exhaust is Built in 304 grade stainless steel and boasts all the features of a quality Fatz built product. Flaring to 4” right at the turbo, you will not find the limit in flow for this system, no matter your power output. Finished to a 320-grain polished finish on all components, you will not be disappointed with the look or sound of your Fatz built exhaust. Fitted with all the factory temp sensor ports for sensors, as well as an additional ¼ port for aftermarket pyro gauges. Option with or without a resonator to suit your preference. Mounting brackets all constructed in 3mm stainless steel and tig welded for strength and great appearance. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available). Purchase VDJ 79 Series landcruiser Turbo Back 4″ Exhaust. Single and Dual Cab (Single Fuel Tank Models) from Fatz Fabrication and experience the difference. For more information regarding our products and services please visit one of our experienced team member’s.
*Removing the DPF on registered vehicles is not permitted under current legislation.
Rendered Images are for product representation only. Actual product may differ in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Polished...
$7,440.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Powder...
$7,560.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Polished...
$7,440.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 Dual snorkel, Dual Airbox Kit with full intake to turbo inlet. Powder...
$7,560.00
VDJ70 Twin Snorkel, Twin Airbox Package
If you are looking for the most comprehensive induction kit available for the VDJ 70 Series Land Cruiser, check out our Twin Airbox, Twin Snorkel package. This kit takes care of everything you will need to make this package work on a vehicle with factory engine bay arrangement. Supplying everything from the snorkel to the turbo snout, left hand and right hand airboxes, our full intake with MAF location to meter both LH and RH airbox airflow accurately. This kit can be installed and driven with no tune required immediately with calibrated MAF tube sizing. With dual snorkels and airboxes, the engines air requirements are divided through two systems, meaning filter service life is dramatically lengthened, and reduced restriction result from dirty filters. For installation of this kit, the main starter battery does need to be re-located to the AUX location. For this an ARB aux battery tray is supplied in the kit. The Main fuel filter needs to be re-located to the Drivers side of the vehicle with bracket, hoses and clamps required being supplied in the kit. The wiring harness running through the Passenger side of the engine bay does need modification to enable relocation of relay box and fuse holders.
Kit Inclusions: RH Snorkel, LH Snorkel, LH Airbox with filter, RH Airbox with filter, Full intake to connect to both Airboxes, ARB AUX battery tray, fuel filter bracket, hoses and clamps, wiring and solder splices required for modifications, cable ties and electrical tape, very detailed instructions with colour photos and all templates required.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 LH Snorkel. RAM Head, TEXTURE coated Satin Black. Suit 3.50" Airbox inlet...
$1,390.00
VDJ70 LH 3.5″ Snorkel.
To add symmetry back to your vehicle after fitting a Fatz Built snorkel to the RH side of your Cruiser, just add a LH snorkel. This snorkel is designed to mirror our RH snorkel and uses the same mounting style and locations. Threaded inserts do need to be fitted to secure the snorkel, with no factory locations on the LH side. Built in 316 grade stainless steel, finished to a seamless form and either powder coated satin black or polished to a 320 grain finish. Specifically designed to terminate in the guard cavity, this snorkel cannot be plumbed to an airbox, as it is shortened specifically to clear the relay box in the guard cavity, so this does not have to be re-located. If you are looking to do the fully plumbed twin set up, please see the specific package.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 LH Snorkel. RAM Head, Polished finish. Suit 3.50" Airbox inlet (Fatz LH...
$1,330.00
VDJ70 LH 3.5″ Snorkel.
To add symmetry back to your vehicle after fitting a Fatz Built snorkel to the RH side of your Cruiser, just add a LH snorkel. This snorkel is designed to mirror our RH snorkel and uses the same mounting style and locations. Threaded inserts do need to be fitted to secure the snorkel, with no factory locations on the LH side. Built in 316 grade stainless steel, finished to a seamless form and either powder coated satin black or polished to a 320 grain finish. Specifically designed to terminate in the guard cavity, this snorkel cannot be plumbed to an airbox, as it is shortened specifically to clear the relay box in the guard cavity, so this does not have to be re-located. If you are looking to do the fully plumbed twin set up, please see the specific package.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 LH Snorkel. RAM Head, Powder coated Satin Black. Suit 3.50" Airbox inlet...
$1,390.00
VDJ70 LH 3.5″ Snorkel.
To add symmetry back to your vehicle after fitting a Fatz Built snorkel to the RH side of your Cruiser, just add a LH snorkel. This snorkel is designed to mirror our RH snorkel and uses the same mounting style and locations. Threaded inserts do need to be fitted to secure the snorkel, with no factory locations on the LH side. Built in 316 grade stainless steel, finished to a seamless form and either powder coated satin black or polished to a 320 grain finish. Specifically designed to terminate in the guard cavity, this snorkel cannot be plumbed to an airbox, as it is shortened specifically to clear the relay box in the guard cavity, so this does not have to be re-located. If you are looking to do the fully plumbed twin set up, please see the specific package.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, TEXTURE coated Satin Black. Suit 3.25" Airbox inlet...
$1,390.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, Polished finish. Suit 3.25" Airbox inlet -FFVDJ-SNRH-RM-POL-325
$1,330.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, Powder coated Satin Black. Suit 3.25" Airbox inlet...
$1,390.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, TEXTURE coated Satin Black. Suit 4" Airbox inlet...
$1,390.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, Polished finish. Suit 4" Airbox inlet -FFVDJ-SNRH-RM-POL-4
$1,330.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. RAM Head, Powder coated Satin Black. Suit 4" Airbox inlet...
$1,390.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. Polished finish. Suit 3.25" Airbox inlet -FFVDJ-SNRH-POL-325
$1,330.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25″ snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25″ all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. Powder coated Satin Black. Suit 3.25" Airbox inlet -FFVDJ-SNRH-SPC-325
$1,390.00
VDJ70 Series Snorkel. 3.25″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 3.25" snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 3.25" all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. Polished finish. Suit 4" Airbox inlet -FFVDJ-SNRH-POL-4
$1,330.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ70 RH Snorkel. Powder coated Satin Black. Suit 4" Airbox inlet -FFVDJ-SNRH-SPC-4
$1,390.00
VDJ70 Series Snorkel. 4″ Stainless.
A snorkel is a must do replacement on the VDJ series model range, with the factory item being no more than a ducting for intake air and providing little in the way of flow or sealing against water ingress. Our Fatz built 4” snorkel is built in 316 or 304 Grade Stainless steel depending on finish option, professionally TIG welded and polished to a seamless 320 grain finish, or powder coated Satin Black to match common bar work accessories and factory elements on your vehicle. Utilising the factory mounting points with sturdy 3 mm stainless brackets, also using the lower factory mounting rubber so no chaffing on body panels can occur. The entry point allows the original entry hole and mountings to be cut out so no evidence is left of the original VDJ 70 snorkel. Easily plumbed to the factory Airbox or sold in combination with our Fatz built airbox, to supply clean Air and piping in no less than 4” all the way to the Mass Air Flow sensor entry. The rear facing snorkel head is finished with a laser cut cross with the Fatz logo incorporated to allow as much open surface area as possible while not allowing large objects to enter the snorkel. Also available is a Ram head configuration which can be supplied with one of 2 Ram head options. (Sold Separately).
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
FATZ FABRICATION RA RAPTOR 5″ P/C SNORKEL. INCLUDES AIRBOX ADATION, AND WASHER BOTTLE. -FFRAR-SN5RH-SPC-FAB
$1,990.00
RA RAPTOR 5″ Snorkel inc Washer bottle
The Ranger Raptor is a substantial step up in the current generation with power to support the exceptional chassis configuration. The Fatz Built RA RAPTOR 5" snorkel incorporates the true RAPTOR ethos with it's oversized yet refined styling. Our Snorkel is built in 304 Grade Stainless steel tube and finished to a true seamless form through a process developed over the 14 years we have been building snorkels. Then powder coated Satin Black to match common accessories on the market. Fitment is key with the need to align with body panels from any angle. Mounting to the A pillar is secure and robust with 3 M6 Nutcerts mounting the folded bracket.
The RA comes from the factory with the washer bottle for the windscreen in the guard cavity making plumbing to the Airbox inlet difficult. Fatz has overcome this with our specifically designed Aluminium replacement unit which fits in the factory location. Resulting in the ability to plumb to the airbox inlet with 4" tubing for maximum airflow as required.
Our snorkels are provided with all components required for installation including all plumbing items needed, cad drawn and scale printed templates, colour photo instruction manual, Fabricated washer bottle, plumbing to airbox and the confidence only purchasing with Fatz can bring.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication Y62 5" RH Snorkel. Powder coated Satin Black. Suit Factory airbox inlet. Includes...
$1,990.00
Y62 Patrol 5″ Powder coated Snorkel .
The Y62 Patrol is gaining popularity for touring and modification, with more aftermarket accessories and options on the market in current times. Our 5″ snorkel complements the appearance of the vehicle and follows body lines in a close fitting manor. The snorkel is 5″ 304 grade stainless steel. Purge welded and sanded back to a seamless finish in all cases. Powder coated Satin black to complement the aesthetic you desire for your vehicle. Supplied in all cases with all needed to install, for a DIY or supplied through one of our retailers across the country. With Fitment of snorkels on Y62 patrols we also install a duck valve and water deflector plate into the factory airbox to help prevent any water entering the snorkel from contacting the air filter. Compatible with all series of Y62 Patrol series1 through 5.
(Not available in polished finish at this time)
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ76 Exhaust, DPF Back (Single fuel tank). WITHOUT Muffler.-FFVDJ76-EXH-DBK
$2,990.00
If you are looking to improve the sound and appearance of your 76 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 76 series sound great. With the DPF in-line, there is little need for a muffler in this system, though this can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded. All brackets are 3mm Stainless. This system will last as long as your 76 series. Compatible with Airbags in the rear. Not compatible with coil converted vehicles.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ76 Exhaust, DPF Back (Single fuel tank). With Muffler.-FFVDJ76-EXH-DBK-MUF
$3,090.00
If you are looking to improve the sound and appearance of your 76 Series, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 76 series sound great. With the DPF in-line, there is little need for a muffler in this system, though this can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded. All brackets are 3mm Stainless. This system will last as long as your 76 series. Compatible with Airbags in the rear. Not compatible with coil converted vehicles.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 SINGLE CAB Exhaust, DPF BACK (Single fuel tank). SIDE EXIT without Muffler...
$1,670.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 SINGLE CAB Exhaust, DPF BACK (Single fuel tank). SIDE EXIT With Muffler...
$1,770.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Dual Cab Exhaust, DPF BACK (Single fuel tank). SIDE EXIT without Muffler...
$1,670.00
VDJ79 series DPF Side exit 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exit exhaust is a great option. Flaring to 4” right at the side exit of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Dual Cab Exhaust, DPF Back. SIDE EXIT With Muffler -FFVDJ79-EXH-DC-DBK-SE-MUF
$1,770.00
VDJ79 series DPF Side 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF side exhaust is a great option. Flaring to 4” right at the side of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo side system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo side in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF side 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
Fatz Fabrication
Fatz Fabrication VDJ79 Exhaust, DPF Back (Single fuel tank). WITHOUT Muffler. DUAL Exit -FFVDJ79-EXH-DBK-DE
$3,820.00
VDJ79 series DPF Back 4″ exhaust
If you are looking to improve the sound and appearance of your Toyota 79 Series Landcruiser, but retain the DPF, our 4” DPF Back exhaust is a great option. Flaring to 4” right at the back of the DPF, our system will improve flow in the rear section of the system and make your 79 series sound great. With the DPF in-line, there is little need for a muffler in this system, though one can be added if you would prefer. All the components of this system are compatible with our turbo back system, except the DPF intermediate pipe, so should you want to change to a full system from the turbo back in the future, there is not a lot of redundant parts. Built from mandrel sections of 304 grade stainless steel and professionally tig welded, this system will last as long as your Toyota 79 Series Landcruiser. Available in single and dual exit. Compatible with Airbags in the rear. Not compatible with coil converted vehicles. (Jmacx compatible system available for 79 Series). Select option for dual Exit for twit Exit DPF Back 4″ System. Supplied with additional mounting bracket, spacers and all items needed for a bolt in solution. This option is still compatible with Airbags helpers over the leaves.
Rendered images are for product representation only. Actual product may differ slightly in appearance and surface finish.
NOTE: Please note that some custom orders may require up to a 2-week wait for completion
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
