AUDIO20JUNE

5-Channel Class D Car/Marine System Amplifier, 75 W x 4 @ 4 Ω + 300 W x 1 @ 2 Ω - 14.4V    The XDM700/5 is ideal for a complete audiophile-grade, subwoofer + four satellite system, and fits comfortably in just about any vehicle or vessel. With this incredible little amplifier, you can drive two pairs of quality component speaker systems with plenty of clean power (75 W x 4 @ 4 Ω), while also generating a solid 300 W of power for a subwoofer system. The technology that makes this much power possible in such a small chassis is our high-speed NexD™ switching amplifier design. Suitable for car or boat installations, the XDM700/5 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. The XDM700/5 includes a 12 dB / octave high-pass filter for one main channel pair, a 12 dB octave high-pass or bandpass filter for the other main channel pair, plus a variable slope low-pass filter for its subwoofer channel. All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of all amplifier channels or just the subwoofer channel directly from the driver's seat or helm. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.   Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 Ω 75 W RMS x 4 Main Channels @ 2 Ω 100 W RMS x 4 Main Channels - Bridged @ 4Ω 200 W RMS x 2 Subwoofer Channel @ 4 Ω 180 W RMS x 1 Subwoofer Channel @ 3 Ω 240 W RMS x 1 Subwoofer Channel @ 2 Ω 300 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A Rated Continuous (RMS) Power @ 12.5 V   Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 Ω 60 W RMS x 4 Main Channels @ 2 Ω 90 W RMS x 4 Main Channels - Bridged @ 4Ω 180 W RMS x 2 Subwoofer Channel @ 4 Ω 180 W RMS x 1 Subwoofer Channel @ 3 Ω 240 W RMS x 1 Subwoofer Channel @ 2 Ω 300 W RMS x 1 Subwoofer Channel @ 1.5 Ω N/A General Specifications Frequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB) Frequency Response (Subwoofer Channel) 10 Hz - 1 kHz (+0, -1dB) S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™)   Signal Processing Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Slope(s): Channels 1 & 2 (front) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 50 Hz - 5 kHz Filter Mode(s): Channels 3 & 4 (rear) High-Pass or Bandpass Filter Slope(s): Channels 3 & 4 (rear) 12 dB/octave Filter Frequency Range: Channels 3 & 4 50 Hz - 500 Hz Filter Mode(s): Subwoofer Channel Low-Pass only Filter Slope(s): Subwoofer Channel 12/24 dB/octave Filter Frequency Range: Subwoofer Channel 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Infrasonic Filter: Subwoofer Channel none Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes Sub Ch. or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A   Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 10.23 in / 260 mm Depth (D) 7.09 in / 180 mm Net Weight 6.15 lb / 2.79 kg

8-Channel Class D Full-Range Car/Marine Amplifier, 100 W x 8 @ 2 Ω / 75 W x 8 @ 4 Ω - 14.4V The ultra-versatile XDM800/8 delivers eight channels of crystal-clear, full-range power and is capable of delivering a whopping 100 watts to each of its channels @ 2 ohms (14.4V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency. Suitable for car or boat installations, the XDM800/8 is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. The XDM800/8 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter, and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all eight amplifier channels directly from the driver's seat or cockpit. Here are a few examples of how the XDM800/8 can be used: Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8 Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4Ω Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4Ω, plus two 4Ω subwoofers with 200 W each Staggered Six-Channel Satellite Amp: drive front speakers with 200 W x 2 @ 4Ω, plus four 4Ω speakers with 75 W each Staggered Five-Channel Satellite Amp: drive three front speakers with 200 W @ 4Ω + rear speakers with 75 W x 2 Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4Ω, plus two 4Ω subwoofers with 200W each Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access.   General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 80 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6/8 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A   Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 14.73 in / 374 mm Depth (D) 7.09 in / 180 mm Physical Specifications

JL AUDIO XDM600/6-24V 6 CH. CLASS D, FULL-RANGE CAR/MARINE AMPLIFIER, 600 W The incredibly flexible XDM600/6-24V packs a serious full-range wallop and delivers a stunning 100 watts to each of its six channels into 2 ohms (28.8V, 1% THD). The technology that makes this much power possible in such a compact chassis is our advanced NexD™ high-speed switching design, which permits full bandwidth Class D operation with extremely low distortion and remarkable efficiency. Suitable for car or boat installations, the XDM600/6-24V is built with marine-grade materials and features an exclusive, dual-mode input filter for noise-free performance in boats or cars. Automatic turn-on capability (via signal sensing or DC-offset sensing) is also onboard for easy factory system upgrades. With the XDM600/6-24V, you have plenty of great use options. Configure it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2. The XDM600/6-24V includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an optional HD-RLC or MHD-RLC (water-resistant) remote level controller (each sold separately), you have the ability to adjust the level of two, four, or all six amplifier channels directly from the driver's seat or cockpit. Finished in a sleek, black powder-coat, all controls are protected beneath a gasketed, removable top cover for easy access. This amplifier is designed for operation in vessels with 24 volt, negative-ground electrical systems. Use of this product in vessels with positive ground and/or voltages other than 24 volt may result in damage to the product and will void the warranty.   Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 75 W RMS x 6 @ 2 Ω 100 W RMS x 6 Bridged @ 4Ω 200 W RMS x 3 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 60 W RMS x 6 @ 2 Ω 90 W RMS x 6 Bridged @ 4Ω 180 W RMS x 3 General Specifications Frequency Response 12 Hz - 22 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD+N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS Min.Copper Power / Ground Wire Gauge 8 AWG wire Fuse Rating 30 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Level Control Optional HD-RLC or MHD-RLC (water-resistant) Remote Level Modes 2 or 4 or All Channels Channel Input Mode Switch Yes (2/4/6 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height (H) 2.05 in / 52 mm Width (W) 10.23 in / 260 mm Depth (D) 7.09 in / 180 mm Net Weight 5.8 lb / 2.63 kg

Two-way Component System: 6.5" (165 mm) Woofer, 1" (25 mm) Silk Dome Tweeter   Born from shared technologies used in our flagship C7 speakers, the C6-650 component system combines the smoothness and transparency of a premium silk dome tweeter with a top-flight component woofer to create a loudspeaker system with exceptional refinement and dynamic capability. Benefiting from vast woofer design experience and advanced modeling systems of JL Audio, the 6.5" (165 mm) C6 component woofers feature purpose-engineered, cast alloy frames outfitted with our Elevated Frame Cooling technology. A DMA-optimized, forged and machined motor system generates outstanding midbass impact with ultra-low distortion. The 1" (25 mm) C6 component tweeters feature edge-driven pure silk dome diaphragms for smooth high-frequency performance with remarkable off-axis response and damping. Neodymium motors and ferrofluid cooling provide high-magnetic flux and improved reliability with extended response from a very compact motor system. Surface- and flush-mount fixtures are included to fit a wide variety of installation applications.  Premium passive crossover networks are included with each C6-650 component system. Featuring four levels of tweeter adjustment, these outboard filter networks are equipped with premium polyester film and electrolytic capacitors as well as low-loss air-core inductors — all accessible beneath a protective, polycarbonate cover. Each C6 passive crossover also includes an advanced electronic tweeter protection circuit designed to minimize the possibility of tweeter failure. C6 Woofer Features:• Forged and machined motor plates with DMA-optimized geometries to create linear motor force under power, leading to outstanding midbass impact, linearity and low distortion• Large diameter, linear profile, flat spider for linear compliance and outstanding excursion capability• Center cap designed to optimize the high-frequency response of the woofer for seamless transition to a tweeter’s response• Oversized voice coil for extended power handling capability, minimizing thermal compression and distortion at higher listening levels• Cast alloy frame with our Elevated Frame Cooling feature• Includes fine mesh grilles C6 Tweeter Features:• Edge-driven pure silk dome design delivers smooth high-frequency performance, with excellent off-axis response and damping• Neodymium motor delivers high magnetic flux from a compact motor design• Ferrofluid cooling and damping improves reliability and response smoothness• Includes surface- and flush-mount fixtures Woofer grilles are included, each consisting of a black grille tray and a fine steel mesh grille with an electroformed JL Audio badge logo. Speakers are sold as a pair. General SpecificationsContinuous Power Handling (RMS)    100 WRecommended Amplifier Power (RMS)    25 - 150 W / Ch.System Efficiency    87.37 dB @ 1 W / 1 mSystem Nominal Impedance    4 ΩSystem Frequency Response    53 Hz – 21 KHz ± 3 dB   Woofer Physical Specifications Frame Outer Diameter* (A) 6.50 in / 165 mm Grille Tray Outer Diameter** (B) 6.76 in / 172 mm Motor Outer Diameter (C) 3.54 in / 90 mm Frontal Coaxial Tweeter Protrusion (D) N/A Frontal Grille Protrusion*** (E) 1 in / 25 mm Mounting Hole Diameter (F) 5.46 in / 139 mm Mounting Depth (G) 2.60 in / 66 mm *Does not take into account mounting tabs**Does not take into account logo badge***Frontal grille protrusion measured from mounting surface Tweeter Physical Specifications Flush Mount Fixture Diameter (A1) 2.13 in / 54 mm Surface Mount Fixture Diameter (A2) 2.11 in / 54 mm Flush Mount Mounting Hole Diameter (B) 1.85 in / 47 mm Flush Mount Mounting Depth (C) 1.85 in / 47 mm Flush Mount Protrusion (D1) 0.30 in / 8 mm Surface Mount Protrusion (D2) 1.04 in / 26 mm Crossover Physical Specifications Width (W) 3.36 in / 85 mm Height (H) 1.44 in / 37 mm Depth (D) 4.72 in / 120 mm

TW1 10-inch Subwoofer (300 W, 2 Ω) Built on JL Audio's patented thin-line subwoofer technology, the 10TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.35 cu.ft. / 10 liters). This, combined with a special cast alloy frame design, makes the 10TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design. JL Audio's patented thin-line woofer technology compresses the architecture of the 10TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 10TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 10TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Even though the 10TW1 is optimized for an enclosure much smaller than any other JL Audio ten-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.36 in / 111 mm) No pole vent: permits mounting close to rear wall of enclosure Extremely small sealed enclosure volume requirements Long linear excursion capability (0.40 in / 10 mm, one-way) DMA-optimized motor design Patented "concentric tube" architecture Patented "floating cone attach method" technology Cast alloy frame with flat edges for tight driver grouping Injection molded, mica-filled polypropylene cone Rubber surround Steel mesh grille included with each driver Precision-built in USA at JL Audio’s Miramar, Florida factory with global components General Specifications Continuous Power Handling (RMS) 300 W Recommended Amplifier Power (RMS) 75 - 300 W Nominal Impedance (Znom) 2 Ω Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter (A) 10.375 in / 264 mm Mounting Hole Diameter (B) 9.0625 in / 230 mm Bolt Hole Circle Diameter (C) 9.7 in / 246 mm Motor Outer Diameter (D) 4.54 in / 115 mm Mounting Depth (E) 4.36 in / 111 mm Front Grille Protrusion (F) 0.87 in / 22 mm Driver Displacement 0.047 cu ft / 1.33 L Net Weight 10.5 lb / 4.8 kg Parameters Free Air Resonance (Fs) 41.45 Hz Electrical “Q” (Qes) 0.696 Mechanical “Q” (Qms) 9.7 Total Speaker “Q” (Qts) 0.649 Equivalent Compliance (Vas) 0.364 cu ft / 10.31 L One-Way Linear Excursion (Xmax)* 0.40 in / 10.0 mm Reference Efficiency (no) Efficiency (1 W / 1 m)** 82.5 dB SPL Effective Piston Area (Sd) 41.602 sq in / 0.0268 sq m DC Resistance (Re) 2.428 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.35 cu ft / 9.91 L External Width (W) 16.125 in / 410 mm External Height (H) 14 in / 356 mm External Depth (D) 5.25 in / 133 mm F3 48.31 Hz Fc 59.21 Hz Qtc 0.927 Enclosure Notes* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.* All specifications are subject to change without notice. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.625 cu ft / 17.7 L External Width (W) 26.625 in / 676 mm External Height (H) 16 in / 406 mm External Depth (D) 5.25 in / 133 mm Internal Slot Port Width (SW) 3.75 in / 95 mm Internal Slot Port Height (SH) 1.875 in / 48 mm Internal Slot Port Length (SL) 22.50 in / 572 mm Port Extension Length (EL) 20.8125 in / 529 mm Tuning Frequency (Fb) 35.0 Hz F3 30.56 Hz Enclosure Notes* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.* All specifications are subject to change without notice. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

TW1 12-inch Subwoofer (300 W, 2 Ω) Built on JL Audio's patented thin-line subwoofer technology, the 12TW1 delivers a powerful combination of shallow mounting depth and excursion capability, while operating in insanely small enclosures (0.65 cu.ft. / 18.4 liters). This, combined with a special cast alloy frame design, makes the 12TW1 capable of operating in extremely tight spaces. These include under-seat installations in trucks, 2-seat sports cars and many other creative applications requiring a compact, low profile subwoofer design. JL Audio's patented thin-line woofer technology compresses the architecture of the 12TW1 using a "concentric tube" structure built into the injection-molded cone body. This structure supports the voice coil and a full annular spider, while permitting the placement of a large motor structure further forward in the speaker than with conventional designs. The 12TW1 also features a clever frame design that minimizes the frontal clearance required for the excursion of the driver. This is accomplished by recessing the suspension attachment surface, so that most of the forward excursion occurs within the frame's dimensions. Thanks to this feature, the 12TW1 requires only 0.87 inches (22 mm) of frontal clearance, even with its grille installed. This allows for more efficient use of space and increased enclosure volume within a given overall depth. Even though the 12TW1 is optimized for an enclosure much smaller than any other JL Audio twelve-inch Subwoofer, it never sounds like a big woofer struggling in a tiny box...instead, it delivers all the rich, deep, controlled bass you have come to expect from a JL Audio subwoofer system. Very shallow mounting depth (4.62 in / 117 mm) No pole vent: permits mounting close to rear wall of enclosure Extremely small sealed enclosure volume requirements Long linear excursion capability (0.40 in / 10 mm, one-way) DMA-optimized motor design Patented "concentric tube" architecture Patented "floating cone attach method" technology Cast alloy frame with flat edges for tight driver grouping Injection molded, mica-filled polypropylene cone Rubber surround Steel mesh grille included with each driver Precision-built in USA at JL Audio’s Miramar, Florida factory with global components General Specifications Continuous Power Handling (RMS) 300 W Recommended Amplifier Power (RMS) 75 - 300 W Nominal Impedance (Znom) 2 Ω Physical Specifications Nominal Diameter 12.0 in / 300 mm Overall Diameter (A) 12.375 in / 314 mm Mounting Hole Diameter (B) 11.0625 in / 281 mm Bolt Hole Circle Diameter (C) 11.7 in / 297 mm Motor Outer Diameter (D) 5.71 in / 145 mm Mounting Depth (E) 4.62 in / 117 mm Front Grille Protrusion (F) 0.87 in / 22 mm Driver Displacement 0.072 cu ft / 2.04 L Net Weight 16.5 lb / 7.5 kg Parameters Free Air Resonance (Fs) 35.06 Hz Electrical “Q” (Qes) 0.61 Mechanical “Q” (Qms) 10.662 Total Speaker “Q” (Qts) 0.577 Equivalent Compliance (Vas) 1.008 cu ft / 28.54 L One-Way Linear Excursion (Xmax)* 0.40 in / 10.0 mm Reference Efficiency (no) Efficiency (1 W / 1 m)** 85.07 dB SPL Effective Piston Area (Sd) 67.608 sq in / 0.0436 sq m DC Resistance (Re) 2.430 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.65 cu ft / 18.41 L External Width (W) 26.50 in / 673 mm External Height (H) 14 in / 356 mm External Depth (D) 5.50 in / 140 mm F3 45.83 Hz Fc 55.99 Hz Qtc 0.92 Enclosure Notes* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.* All specifications are subject to change without notice. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.125 cu ft / 31.86 L External Width (W) 31.75 in / 806 mm External Height (H) 16 in / 406 mm External Depth (D) 7 in / 178 mm Internal Slot Port Width (SW) 5.50 in / 140 mm Internal Slot Port Height (SH) 2.25 in / 57 mm Internal Slot Port Length (SL) 22.625 in / 575 mm Port Extension Length (EL) 20.75 in / 527 mm Tuning Frequency (Fb) 34.0 Hz F3 31.52 Hz Enclosure Notes* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.* All specifications are subject to change without notice. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

W6v3 10-inch Subwoofer (600 W, dual 4 Ω voice coils) If you are seeking to reproduce the highest quality sub-bass in a very compact enclosure application, the 10W6v3 is the ultimate choice. This advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The 10W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 0.55 cu. ft. (15.6 l) of air space, or a 0.75 cu. ft. (21.2 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. Greater excursion capability and higher power handling distinguish it from our 10W3v3 10-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver. General Specifications Continuous Power Handling (RMS) 600 W Recommended Amplifier Power (RMS) 200 - 600 W Nominal Impedance (Znom) Dual 4 Ω Physical Specifications Nominal Diameter 10.0 in / 250 mm Overall Diameter (A) 10.5 in / 267 mm Mounting Hole Diameter (B) 9.02 in / 229 mm Bolt Hole Circle Diameter (C) 9.86 in / 250 mm Motor Outer Diameter (D) 6.76 in / 172 mm Mounting Depth (E) 6.89 in / 175 mm Required Pole Vent Clearance 0.50 in / 13 mm Driver Displacement 0.078 cu ft / 2.1 L Net Weight 20 lb / 9.1 kg Parameters Free Air Resonance (Fs) 30.12 Hz Electrical “Q” (Qes) 0.543 Mechanical “Q” (Qms) 9.228 Total Speaker “Q” (Qts) 0.513 Equivalent Compliance (Vas) 0.821 cu ft / 23.25 L One-Way Linear Excursion (Xmax)* 0.75 in / 19 mm Reference Efficiency (no) 0.11% Efficiency (1 W / 1 m)** 82.7 dB SPL Effective Piston Area (Sd) 49.303 sq in / 0.0318 sq m DC Resistance (Re)*** 6.452 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.55 cu ft / 15.57 L External Width (W) 12.5 in / 318 mm External Height (H) 12.5 in / 318 mm External Depth (D) 10.5 in / 267 mm F3 42.27 Hz Fc 47.55 Hz Qtc 0.8099 Download detailed sealed enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. This vent is located around the JL Audio badge at the rear of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 0.75 cu ft / 21.2 L External Width (W) 21.5 in / 546 mm External Height (H) 12.375 in / 314 mm External Depth (D) 11.125 in / 282 mm Internal Slot Port Width (SW) 1.375 in / 35 mm Internal Slot Port Height (SH) 10.875 in / 275 mm Internal Slot Port Length (SL) 30.40 in / 772 mm Port Extension Length (EL) 16.5 in / 419 mm Tuning Frequency (Fb) 39 Hz F3 33 Hz Download detailed ported enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

W6v3 12-inch Subwoofer (600 W, dual 4 Ω voice coils)   If you are seeking intensely powerful sub-bass that compromises nothing in terms of sound quality, the 12W6v3 is your ultimate ally. This highly advanced Subwoofer offers several technologies shared with the flagship W7AE subwoofers to provide powerful advantages in motor linearity and suspension behavior. These combine with a very efficient cooling circuit to deliver reduced distortion and outstanding dynamic balance. The 12W6v3 is best used with amplifier power in the 200W - 600W range and is optimized to operate in a sealed enclosure with only 1.0 cu. ft. (28.3 l) of air space, or a 1.3 cu. ft (36.8 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. Greater excursion capability and higher power handling distinguish it from our 12W3v3 12-inch Subwoofer, allowing for higher output. Dual 4 Ω voice coils permit deploying the W6v3 as a 2 Ω or 8 Ω driver. General Specifications Continuous Power Handling (RMS) 600 W Recommended Amplifier Power (RMS) 200 - 600 W Nominal Impedance (Znom) Dual 4 Ω Physical Specifications Nominal Diameter 12.0 in / 300 mm Overall Diameter (A) 12.5 in / 318 mm Mounting Hole Diameter (B) 11.02 in / 280 mm Bolt Hole Circle Diameter (C) 11.86 in / 301 mm Motor Outer Diameter (D) 7.0 in / 178 mm Mounting Depth (E) 7.52 in / 191 mm Required Pole Vent Clearance 0.50 in / 13 mm Driver Displacement 0.105 cu ft / 2.97 L Net Weight 25.6 lb / 11.6 kg Parameters Free Air Resonance (Fs) 26.919 Hz Electrical “Q” (Qes) 0.487 Mechanical “Q” (Qms) 9.365 Total Speaker “Q” (Qts) 0.463 Equivalent Compliance (Vas) 1.920 cu ft / 54.37 L One-Way Linear Excursion (Xmax)* 0.75 in / 19 mm Reference Efficiency (no) 0.11% Efficiency (1 W / 1 m)** 85.4 dB SPL Effective Piston Area (Sd) 75.338 sq in / 0.0486 sq m DC Resistance (Re)*** 6.493 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.0 cu ft / 28.3 L External Width (W) 15 in / 381 mm External Height (H) 15 in / 381 mm External Depth (D) 12 in / 305 mm F3 41.62 Hz Fc 45.99 Hz Qtc 0.7912 Download detailed sealed enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. This vent is located around the JL Audio badge at the rear of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 0.75 in / 19 mm Volume (net int.) 1.3 cu ft / 36.8 L External Width (W) 27 in / 686 mm External Height (H) 14 in / 356 mm External Depth (D) 12.5 in / 318 mm Internal Slot Port Width (SW) 1.75 in / 44 mm Internal Slot Port Height (SH) 12.5 in / 318 mm Internal Slot Port Length (SL) 37.125 in / 943 mm Port Extension Length (EL) 21.250 in / 540 mm Tuning Frequency (Fb) 33 Hz F3 31 Hz Download detailed ported enclosure information Enclosure Notes* The W6v3’s employ a pole vent to remove heat and pressure from the inside of the speaker. A minimum distance of 0.5 in (13 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent.* The enclosure recommendations listed are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.* All enclosure volumes listed are net internal volumes! Box volume displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions listed have already taken this into account.* When using two subwoofers in a common enclosure simply double the required volume and, in the case of a ported enclosure, use two times the recommended port(s).* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and amplifiers. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. Safety NoticeProlonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity. When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

10th Anniversary Edition - W7 13.5-inch Subwoofer (1500 W, Dual 1.5 Ω voice coils) Words like "extreme," "reference" and "ultimate" get thrown around quite a bit in the Subwoofer world, but rare is the product that can honestly lay claim to them. The 13W7AE does. Taking the W7 design formula to its highest level, the 13W7AE offers a staggering linear excursion envelope that exceeds 1.25 inches (32 mm) one-way, along with a suspension capable of over 4-inches of peak-to-peak excursion. Combine that with a piston diameter that is 28% larger than the 12W7AE's, and you have a serious high-performance driver for the most demanding applications. With a 13W7AE, limits simply vanish and amazing sub-bass happens... on all fronts, at any level. Our most potent Subwoofer is best used with amplifier power in the 500W - 1500W range and is optimized to operate in a 1.875 cu. ft. (53.1 l) sealed enclosure, or a 2.375 cu. ft. (67.3 l) ported enclosure. Detailed enclosure recommendations can be found in the "Specifications" tab. W7AE (Anniversary Edition) Subwoofers celebrate the 10th Anniversary of the launch of the W7 subwoofers. Functionally, they are identical to the original W7's, but they are distinguished by the following cosmetic differences: Satin-Black Powdercoated Baskets Bright Anodized Surround Clamp Ring Anniversary Edition Cone Badge Anniversary Edition Terminal Label General Specifications Continuous Power Handling (RMS) 1500 W Recommended Amplifier Power (RMS) 500 - 1500 W Nominal Impedance (Znom) Dual 1.5 Ω Physical Specifications Nominal Diameter 13.5 in / 345 mm Overall Diameter (A) 14 in / 356 mm Mounting Hole Diameter (B) 11.9 in / 302 mm Bolt Hole Circle Diameter (C) 12.7 in / 323 mm Motor Outer Diameter (D) 8.38 in / 213 mm Mounting Depth (E) 10.5 in / 267 mm Driver Displacement 0.21 cu ft / 5.9 L Net Weight 52 lb / 23.6 kg Parameters Free Air Resonance (Fs) 23.5 Hz Electrical “Q” (Qes) 0.476 Mechanical “Q” (Qms) 7.517 Total Speaker “Q” (Qts) 0.448 Equivalent Compliance (Vas) 3.68 cu ft / 104.3 L One-Way Linear Excursion (Xmax)* 1.25 in / 32 mm Reference Efficiency (no) 0.27% Efficiency (1 W / 1 m)** 86.3 dB SPL Effective Piston Area (Sd) 107.35 sq in / 0.0693 sq m DC Resistance (Re)*** 2.41 Ω * Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.** For parallel-wired voice coils, divide "Re" by 4. All other specifications remain the same.*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications remain the same. Sealed Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 1.0 in / 25 mm Volume (net int.) 1.875 cu ft / 53.1 L External Width (W) 16 in / 407 mm External Height (H) 16 in / 407 mm External Depth (D) 18.875 in / 479 mm F3 37.4 Hz Fc 40.5 Hz Qtc 0.77 Enclosure NotesNet volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects. * The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker. This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent. The dimensions given for the enclosure examples above take all applicable displacements into consideration Safety NoticeIt is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration. Ported Enclosure Specifications Wall Thickness 0.75 in / 19 mm Front Baffle Thickness 1.0 in / 25 mm Volume (net int.) 2.375 cu ft / 67.3 L External Width (W) 25.875 in / 657 mm External Height (H) 16 in / 406 mm External Depth (D) 17.25 in / 438 mm Internal Slot Port Width (SW) 2.25 in / 57 mm Internal Slot Port Height (SH) 14.5 in / 368 mm Internal Slot Port Length (SL) 26.25 in / 667 mm Port Extension Length (EL) 7.875 in / 200 mm Tuning Frequency (Fb) 34.6 Hz F3 30.3 Hz Enclosure NotesNet volumes given above do not include the air volume displaced by the speaker (Driver Displacement). This value must be added to the net volume along with the displacement of any braces and/or ports (if applicable) to arrive at a gross internal volume. Air inside a port is not part of the effective net volume. Calculate ports as solid, not hollow objects. * The W7’s employ a pole vent to remove heat and pressure from the inside of the speaker.This vent is located at the rear of the speaker. A minimum distance of 0.75 in (19 mm) is required between the back of the speaker and any wall of the enclosure to allow proper operation of the pole vent. The dimensions given for the enclosure examples above take all applicable displacements into consideration Safety NoticeIt is absolutely essential that the completed subwoofer enclosure is mounted firmly to the vehicle with heavy steel bolts (0.5 in diameter) and large steel washers on both sides of the bolts. This will reduce the likelihood of occupant injury in the event of a collision or sudden deceleration.

ITALIAN SYMPHONY OF ELEGANCE AND HI-END AUDIO MASTERY Introducing “Capri,” the epitome of elegance and sophistication in hi-end audio sources. Inspired by the breathtaking beauty and luxurious atmosphere of the namesake island, the Capri Hi-End Source is a true masterpiece that transcends ordinary audio experiences. With meticulous attention to detail and uncompromising craftsmanship, the Capri Hi-End Source by Hertz represents the pinnacle of audio engineering.  Engineered to deliver superior sound quality and withstand the harsh marine environment, this top-of-the-line audio source is designed to elevate your boating experience to new heights. With a focus on high-resolution audio, CAPRI ensures that every note, every detail, and every nuance of your favorite music is reproduced with stunning clarity and fidelity, allowing you to immerse yourself in a true audiophile-grade experience on the water. Specification DISPLAY 4.3” COLOR TFT IPS PEAK POWER @ 4 Ω CLASS-D: 4 x 70 W FRONT PANEL IP RATING IP67 MULTI-ZONE 4 LINE OUT (RCA) 4x L+R (one per zone) - HPF: ALL, 60, 80, 100 Hz SUBWOOFER OUT (RCA) 4x (LPF: ALL, 60, 80, 100 Hz) AUX INPUT (RCA) 1x L+R S/PDIF DIGITAL IN Toslink (24 bit/96 kHz) S/PDIF DIGITAL OUT Coaxial (24 bit/96 kHz) EQUALIZER CUSTOM 8 BANDS for each zone EQ. PRESET 8 CAMERA IN Yes BATTERY VOLTAGE GAUGE Yes Sources TUNER AM/FM (RDS) (EU/US) Weather band USB Yes (2A) IPOD/IPHONE Yes DAB+ Ready SIRIUSXM READY Yes BLUETOOTH 5.1Audio streaming with ID3 Tag DisplayLDAC – AAC – APTX HD REMOTE CONTROL HMC HD1 (up to 4 zones) HMC U1 (up to 2 zones) Size & Mounting Unit Size mm (in.) W 146 (5.748) x H 105 (4.134) x D 121 (4.763) Mounting Hole size mm (in.) W 122 (4.8) x H 52 (2.05) Mounting Depth mm (in.) 99 (3.89 Mounting Method Panel mount (4 screws) Physical Specs A 178.5 - 7.023 (mm - in.) B 101 - 3.57 (mm - in.) C 104 - 4.09 (mm - in.) D 31 - 1.22 (mm - in.) E 60 - 2.36 (mm - in.)

The ultra-compact S8 DSP is the perfect solution for integrating any OEM source into your audio upgrade project for cars, motorcycles, and boats! S8 DSP is a distilled essence of technology at the service of the highest audio quality in a corrosion-free case cast in metal and composite materials. General Specifications POWER SUPPLY Nominal Power supply voltage / fuse: 7 ÷ 20 VDC / 1A Pulse operating voltage: 5 ÷ 24 VDC Idling current: 0.34 A OFF current (ART= OFF): <80 uA OFF current (ART= ON): <80 uA Remote IN 6 ÷ 20 VDC (10 mA) Remote OUT 4 ÷ 20 VDC (150 mA) ART - Automatic Remote Turn on/off from BTL speaker outputs (selectable): 1.5 ÷ 7 VDC Input Stage Analog low level Inputs 6 ch. (Differential input) (Molex microfit to RCAs) Analog high level Inputs 6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator) Digital inputs Yes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA) Input sensitivity (low level) 0.8V – 6V RMS Input sensitivity (high level) 2.5V – 21V RMS Analog inputs management Audio input routing matrix type Analog inputs eq 7 bands paragraphic for each input channel ART Automatic Remote Turn-On/Off with Speaker-In Output Stage Analog outputs (rca) 8 channels Max output level (rms) @ 0.05% THD 4V Analog outputs management The DSP controls each output channel: gain, crossover, EQ, delay, polarity Bandwidth 10Hz – 40KHz (+/-3db) Signal to noise ratio (A weighted) 105dBA (Analog Input) 112dBA (Digital Input) THD+N (@ 1Vrms out, @ 1Khz) <0.005% Crosstalk (channel separation) @ 1KHz >95dBA Digital Signal Processor Sample rate 96KHz Bit depth 24 Output equalizer 15 bands per channel w/ adjustable Q and Frequency Equalizer resolution 1/10th dB per step +12dB / -12dB Time alignment (distance) 0 ÷ 468.4 cm / 0 ÷ 184.4 inches Time alignment (time) 0 ÷ 13.5ms Time alignment (step) 0,08 ms; 2,8 cm / 1.1 inch Time alignment (fine set) 0,02 ms; 0,7 cm / 0.27 inch Crossovers AP/HP/LP/BP all channels Crossover type Butterworth, Linkwitz-Riley, Bessel (All Channels) Crossover slope From 6dB/oct. until 30dB/oct. (6dB step) Crossover steps 120 steps 20Hz-20KHz Mute function Each channel individually, or all channels. Presets 4 presets Presets selection 2 specific wires to control the 4 presets selection by extarnal switches. Input selection by wire One specific wire to select the desired input between Analog or Digital. Audio signal compressor on output stage Yes (enable/disable) DSP chipset Analog Device: ADAU1451 DSP management by bt app (iOS/ Android) 1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file. Setup file sharing via bt Upload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode. DSP management by pc / mac / ios / android Microsoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE) Physical Specs Max size W x H x D (mm/inch) 130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47 Weight (kg/lbs) 0,66 / 1.45

Venezia V6 24V option is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. General Specs Channels 6 - 5 - 4 - 3 POWER SUPPLY Power supply voltage 22 ÷ 33 VDC ldling current (power ON/OFF): 1 A / 0.04 mA Consumption@ 1Ω, 28.8 VDC (Max Musical Power): 30 A Remote In: 7 ÷ 33 VDC - 1 mA Remote Out: 14÷ 33 VDC AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,06% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 100 dB Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@6Ch:@5Ch:@4Ch:@3Ch: 2Ω2Ω + 2Ω + 2Ω +2Ω + 4Ω2Ω + 2Ω + 2Ω +4Ω + 4Ω4Ω Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% 6Ch 160 W x 6 (4Ω) 6Ch 290 W x 6 (2Ω) 5Ch 160 x 4 (4Ω) + 580 x 1 (4Ω) 5Ch 290 x 4 (2Ω) + 580 x 1 (4Ω) 4Ch 160 x 2 (4Ω) + 580 x 2 (4Ω) 4Ch 290 x 2 (2Ω) + 580 x 2 (4Ω) 3Ch 580 x 3 (4Ω) Total Power 1740 W INPUTS / FILTERS lnputs: A Ch. Pre inB Ch. Pre inC Ch. Pre in Pre Out: No Ch. A filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. B filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. C filters: MONO IN (on-off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Lo-pass: 50 ÷ 500 Hz @ 12 dB/Oct Bass boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 330 13 B 300 11.18 C 200 7.87 D 170 6.7 E 54 2.12 kg lb Weight: 3.72 8.2

Venezia V5C 24V is the compact five-channel marine amplifier, featuring 80 W x 4 (4Ω) plus 330 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5C 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5C 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. General Specs Channels 5 - 3 POWER SUPPLY Power supply voltage 22 ÷ 33 VDC ldling current (power ON/OFF): 1.7 A / 0.05 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 47 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,05% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 100 dB Damping factor (100Hz @ 4Ω) >130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@5Ch:@3Ch: 2Ω4Ω + 4Ω + 2Ω Weight (kg/lb): 3.72 / 8.2 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% 5Ch 80 W x 4 (4Ω) + 330 x 1 (4Ω) 5Ch 115 W x 4 (2Ω) + 550 W x 1 (2Ω) 3Ch 230 W x 2 (4Ω) + 330 W x 1 (4Ω) 3Ch 230 W x 2 (4Ω) + 550 W x 1 (2Ω) Total Power 1010 W INPUTS / FILTERS lnputs: A Ch. Pre inB Ch. Pre inSub Ch. Pre in Pre Out: No A Ch. filters: Yes By-Pass Yes Hi-Pass : 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct B Ch. filters: By-pass: Yes Hi-Pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-Pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Sub Ch. filters: By-pass: No Low-Pass: 50 ÷ 250 Hz @ 24 dB/Oct Phase (adjust°): (0 ÷ 180°) Subsonic: 25 Hz @ 24 dB/Oct Boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 270 10.6 B 240 9.44 C 185 7.2 D 155 6.1 E 54 2.12 kg lb Weight: 3.72 8.2

Venezia V5 is the most-powerful five-channel Hertz marine amplifier ever, featuring 130 W x 4 (4Ω) plus 490 W (4Ω) for the subwoofer! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability deliver the output levels needed in the marine environment. Venezia V5 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V5 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting... General Specs Channels 5 - 3 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1.8 A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 70 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distortion - THD (100Hz @ 4Ω): <0,05% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 102 dB Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@5Ch:@3Ch: 2Ω4Ω + 4Ω + 2Ω Weight (kg/lb): 3.72 / 8.2 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 5Ch 130 W x 4 (4Ω) + 490 x 1 (4Ω) 5Ch 220 W x 4 (2Ω) + 820 W x 1 (2Ω) 3Ch 440 W x 2 (4Ω) + 490 W x 1 (4Ω) 3Ch 440 W x 2 (4Ω) + 820 W x 1 (2Ω) Total Power 1700 W INPUTS / FILTERS lnputs: A Ch. Pre inB Ch. Pre inSub Ch. Pre in Pre Out: No A Ch. filters: Yes By-Pass Yes Hi-Pass : 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct B Ch. filters: By-pass: Yes Hi-Pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-Pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Sub Ch. filters: By-pass: No Low-Pass: 50 ÷ 250 Hz @ 24 dB/Oct Phase (adjust°): (0 ÷ 180°) Subsonic: 25 Hz @ 24 dB/Oct Boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 330 13 B 300 11.8 C 200 7.87 D 170 6.7 E 54 2.12 kg lb Weight: 3.72 8.2

Venezia V1 24V option is the most-powerful mono Hertz marine amplifier ever, featuring 1260 W @ 1Ω stable! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation. Venezia V1 24V is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V1 24V is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. General Specs Channels 1 POWER SUPPLY Power supply voltage 22 ÷ 33 VDC ldling current (power ON/OFF): 1 A / 0.04 mA Consumption@ 1Ω, 28.8 VDC (Max Musical Power): 27 A Remote In: 7 ÷ 33 VDC - 1 mA Remote Out voltage: 14 ÷ 33 VDC AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,02% Bandwidth: 10 ÷ 500 Hz S/N Ratlo (A welghted @ 1 V): 102 dB Damping factor (100Hz @ 4Ω) 500 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10kΩ Load impedance (MIN) 1 Ω Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 28.8 VDC, THD 1% 1Ch 700 W (4Ω) 1Ch 1260 W (2Ω) 1Ch 1260 W (1Ω) Total Power 1260 W INPUTS / FILTERS lnputs: PRE IN Pre Out: Hi-Pass filter 50 ÷ 250 Hz @ 12 dB/Oct Filters: Yes By-pass Yes (Full) Lo-Pass: 50 ÷ 500 Hz @ 24 dB/Oct Phase (adjust): (0 ÷ 180°) Subsonic: 25 Hz @ 24dB/Oct. Bass boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 270 10.63 B 240 9.45 C 185 7.28 D 155 6.10 E 54 2.12 Weight (kg/lb): kg lb 2.72 5.99

Venezia V1 is the most-powerful mono Hertz marine amplifier ever, featuring 1260 W @ 1Ω stable! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation. Venezia V1 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V1 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. General Specs Channels 1 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1 A / 0.04 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 52A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,02% Bandwidth: 10 ÷ 500 Hz S/N Ratlo (A welghted @ 1 V): 102 dB Damping factor (100Hz @ 4Ω) 500 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10kΩ Load impedance (MIN) 1 Ω Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 1Ch 700 W (4Ω) 1Ch 1260 W (2Ω) 1Ch 1260 W (1Ω) Total Power 1260 W INPUTS / FILTERS lnputs: PRE IN Pre Out: Hi-Pass filter 50 ÷ 250 Hz @ 12 dB/Oct Filters: Yes By-pass Yes (Full) Lo-Pass: 50 ÷ 500 Hz @ 24 dB/Oct Phase (adjust): (0 ÷ 180°) Subsonic: 25 Hz @ 24dB/Oct. Bass boost 50 Hz (adjust): (0 ÷ 12) dB Physical Specs mm in A 270 10.63 B 240 9.45 C 185 7.28 D 155 6.10 E 54 2.12 Weight (kg/lb): kg lb 2.72 5.99

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 4D amplifier is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. General Specs Channels 4 - 2 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 15 A Idling current (power ON/OFF) 1.2 A / 0.04 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4Ω) 0.2 % Bandwidth: 10 ÷ 30K Hz S/N Ratio (A weighted @ 1 V): 95 dB Damping factor (100 Hz @ 4Ω) 45 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN)@ 4 Ch:@ 2 Ch: 2Ω4Ω Max size (mm/in): 223 x 100,5 x 43,6 / 8.77 x 3.95 x 1.71 Weight (kg/lb): 1.35 / 2.97 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%: 4 Ch 50 W x 4 (4 Ω) 4 Ch 65 W x 4 (2 Ω) 3 Ch 50 W x 2 (4 Ω) + 130 W x 1 (4 Ω) 3 Ch 65 W x 2 (2 Ω) + 130 W x 1 (4 Ω) 2 Ch 130 W x 2 (4 Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10%: 4 Ch 60 W x 4 (4 Ω) 4 Ch 75 W x 4 (2 Ω) 3 Ch 60 W x 2 (4 Ω) + 150 W x 1 (4 Ω) 3 Ch 75 W x 2 (2 Ω) + 150 W x 1 (4 Ω) 2 Ch 150 W x 2 (4 Ω) Total Power 600 W INPUTS / FILTERS Inputs: PRE IN FRONT Ch. filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct REAR Ch. filters FULL Yes Hi-Pass: 65-85-115 Hz @ 12 dB/Oct Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

Thanks to the ultra-compact cast-aluminium chassis (IP64 rated), the HMP 1D amplifiers is nature-proof, being the ideal choice for UTV/ATV/motorcycle installations. It features an incredible power/size ratio and an easy setup thanks to the integrated crossover filter. The Front End section features a complete and bypassable crossover system, providing full system design flexibility with or without external processors, offering the user endless connection possibilities with any source. Inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences, for noise-free results. The level of HMP 1 D amplifiers can be remote controlled with the included HRC BM (Hertz Remote Control Bass Management). Connected to the Remote Control plug, this provides extremely precise volume level from the comfort of your seat. General Specs Channels 1 Power Supply Power supply voltage / fuse: 11÷15 VDC / 1 x 15 A Idling current (power ON/OFF): 1 A / 0.04 mA Consumption @ 2Ω, 14.4 VDC (Max Musical Power): 15 A Remote In: 4 ÷ 15 VDC - 1 mA ART : Automatic Remote Turn-On/Off Amplifier Stage Distortion - THD (100 Hz @ 4Ω): 0.1 % Bandwidth: 10 ÷ 500 Hz S/N Ratio (A weighted @ 1 V): 105 dB Damping factor (100 Hz @ 4Ω): 300 Pre-In sensitivity: LO: 0.2 ÷ 5 VHI: 0.8 ÷ 20 V Load impedance (MIN) @ 2 Ch: 2Ω Max size (mm/in.): 223 x 100.5 x 43.6 / 8.77 x 3.95 x 1.70 Weight (kg/lb.): 1.35 / 2.97 Adjustable Crossovers yes Output Power Output Power (RMS) @ 14.4 VDC, THD 1%: 1 Ch: 150 W x 1 (4Ω) 1 Ch: 250 W x 1 (2Ω) Output Power (RMS) @ 14.4 VDC, THD 10%: 1 Ch: 180 W x 1 (4Ω) 1 Ch: 300 W x 1 (2Ω) Total Power 300 W INPUTS / FILTERS INPUTS: PRE IN Filters FULL: Yes Lo-Pass: 65-85-115 Hz @ 12 dB/Oct. SUBSONIC 45 Hz: Off - 22 - 32 - Hz @ 12 dB/Oct. BOOST 50 Hz (select): Off / + 6 / + 9 dB Remote Volume Controlincluded (-50 ÷ 6) dB Physical Specs mm in A 223 8.78 B 207 8.15 C 100,5 3.96 D 76 2.99 E 43,6 1.72

HMD1 mono amplifier is the perfect solution to add one or more marine subwoofer to your vassel, being the ideal power extension of HMD8 DSP. At 1 Ohms it is stable and can supply up to 1000 W of power with extremely compact dimension.  General Specs Channels 1 POWER SUPPLY Power supply voltage / fuse 11 ÷ 15 VDC / 2 x 30A Operating power supply voltage 6.5 ÷ 17 VDC Idling current 1.3 A Idling current off 0.05 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power 50 A Remote IN 6.5 ÷ 15 VDC (1 mA) ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) 2 ÷ 7 VDC AMPLIFIER STAGE Distortion - THD @ 1 kHz, 4Ω, 70% Rated Power 0.1% Damping factor @ 1 kHz, 4Ω, 2 VRMS 140 Bandwidth @ -1.5 dB 10 Hz ÷ 500 Hz S/N ratio (A weighted @ 1 V Input) Master Input 110 dBA Input sensitivity Pre-In Selectable: 0.6 - 2.0 - 6.0 VRMS Input sensitivity Speaker-In Selectable: 2.0 - 6.5 - 20 VRMS Minimum load impedance 1Ω Adjustable Crossovers yes Output Power 1Ch @ 4Ω 500 W 1Ch @ 2Ω 800 W 1Ch @ 1Ω 1000 W Total Power 1000 W INPUTS / FILTERS Pre-In Inputs RCA Speaker-In Inputs Wired Physical Specs Max size W x H x D (mm/inch) 243 x 48 x 1599.56 x 1.8 x 6.25 Weight (kg/lbs) 1,98 (4.36

HCP 2 MX  marine amplifier feature a compact design ready to face the open water environment, providing tons of clean power. The HCP M heat sink has been crafted from extruded aluminium, a material unmatched for lightness, robustness and heat dissipation. To keep size to a minimum, the power transistors are placed between the PCB and the top side of the heat sink where heat is gathered. Built up heat is then directed to the special dissipation “wings” along the side of the amplifier. Both Pre-In and Speaker-In inputs feature a special balanced circuitry, ensuring high rejection against electro-magnetic interferences for noise-free results. The HCP M amplifiers crossover section ensure extreme flexibility: fully adjustable Lo-pass, Hi-pass filters with 12 dB/Oct. and 24 dB/Oct. slopes according to the amplifier model; Bass Boost is also available to enhance low frequencies. More specifically HCP 2 MX features Hi-Pass pre-amplified outputs, providing the ability to create a Band-Pass on the front woofer. General Specs Channels 2 - 1 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A ldling current (power ON/OFF): 0.6 A / 0.4 mA Consumption@ 1Ω, 14.4 VDC (Max Musical Power): 20 A Remote In: 7 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-OniOff with Speaker-ln AMPLIFIER STAGE Distorsion - TliD (100Hz @ 4Ω): 0.03% Bandwidth: 10 ÷ 65 kHz S/N Ratlo (A welghted @ 1 V): 105 dB Damping factor (100Hz @ 4Ω) 300 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Speaker-ln sensitivity: 0.8 ÷ 20 VRMS Load impedance (MIN)@2Ch:@1Ch: 2 Ω4 Ω Max size (mm/in): 315 x 190 x 50 / 12.40 x 7.48 x 1.97 Weight (kg/lb): 2.57 / 5.66 Adjustable Crossovers yes Output Power OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 2Ch 100 W x 2 (4Ω) 2Ch 160 W x 2 (2Ω) 1Ch 320 W x 1 (4Ω) OUTPUT POWER (RMS) @ 14.4 VDC, THD 10% 2Ch 120 W x 2 (4Ω) 2Ch 200 W x 2 (2Ω) 1Ch 400 W x 1 (4Ω) CEA 2006-A RATINGS RMS Power (4 Ω, ≤ 1 % THD+N,14.4 V): 100 W x 2 Ch S/N Ratio (ref. 1 W output) 83 dBA Total Power 800 W INPUTS / FILTERS lnputs: PRE IN/ SPEAKER IN Pre-out FULL Yes Hi-Pass: 50 ÷ 3200 Hz @ 12 dB/Oct Lo-Pass 50 ÷ 3200 Hz @ 12 dB/Oct Filters FULL Yes Hi-Pass: 50 ÷ 3200 Hz @ 12 dB/Oct Lo-Pass 50 ÷ 3200 Hz @ 12 dB/Oct Mono (On/Off) Yes Boost 50 Hz (select) (0 / 3 / 6) dB Physical Specs mm in A 315 12.40 B 291 11.45 C 190 7.48 D 166 6.53 E 50 1.97

HCP 1MDK mono marine amplifierfeatures latest generation D-Class 2Ω stable output stage reaching the impressive RMS power of 740 W x 1 (4 Ω). Engineered and tested for the real environment of application (UV, salt-fog, vibrations, high/low temperature, thermal shock, dust), HCP 1MDK features a compact design built from extruded aluminium heatsink with top side ensuring effective heat transfer. The special balanced input circuitry reject electro-magnetic disturbances and the Hi-Level and lo-level inputs are compatible with any source. The Adjustable Bass Boost (50 Hz) with continuity between 0 dB and 6 dB adds more punch to subwoofer and SUBSONIC filter (24 dB – 25 Hz), removes very low subsonic frequencies from music signal to prevent damage to the subwoofer. The continuously adjustable PHASE control (0 to 180°) optimizes alignment of woofer bass frequencies with sub ones. The Optional Remote Volume Control (HRC) provides the ability to adjust subwoofer volume level from the dashboard. General Specs Channels 1 POWER SUPPLY Power supply voltage / fuse: 11 ÷ 15 VDC / 3 x 30 A Idling current (power ON/OFF) 0.8 A / 1 mA Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 45 A Remote In: 7 ÷ 15 VDC - 1 mA ART: Automatic Remote Turn-On/Off with Speaker-In AMPLIFIER STAGE Distorsion - THD (100 Hz @ 4 Ω): 0.25% Bandwidth: 10 ÷ 500 Hz S/N Ratio (A weighted @ 1 V): 100 dB Damping factor (100 Hz @ 4 Ω): > 100 Pre-In sensitivity: 0.2 ÷ 5 VRMS Speaker-In sensitivity: 0.8 ÷ 20 VRMS Load impedance (MIN) @ 1 Ch: 2 Ω Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97 Weight (kg / lb.): 3 / 6,61 Adjustable Crossovers yes Output Power Output Power (RMS) @ 14.4 VDC, THD 1% 1 Ch: 600 W x 1 (4 Ω) 1 Ch: 1100 W x 1 (2 Ω) Output Power (RMS) @ 14.4 VDC, THD 10%: 1 Ch: 740 W x 1 (4 Ω) 1 Ch: 1240 W x 1 (2 Ω) CEA 2006-A Ratings: RMS Power (4 Ω, ≤1 %THD + N, 14.4 V): 600 W x 1 Ch S/N Ratio (ref. 1 W output): 80 dBA Total Power 1240 W INPUTS / FILTERS INPUTS: PRE IN / SPEAKER IN Pre out Hi-Pass: 50 ÷ 250 Hz @ 12 dB/Oct. Filters FULL: Yes Lo-Pass: 50 ÷ 250 Hz @ 24 dB/Oct. SUBSONIC (on/off): 25 Hz @ 24 dB/Oct. BOOST 50 Hz (adjust): (0 ÷ 6) dB PHASE(adjust): (0 ÷ 180) deg Remote Volume Control (adjust): (-50 ÷ 6) dB Physical Specs mm in A 315 12.40 B 291 11.45 C 190 7.48 D 166 6.53 E 50 1.97

The new HMS 12 marine sport grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The sport grille, featuring built-in LEDs, can be easily and painted the perfect color for your vessel.  The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion! Size mm (in.) 300 (12) Power Handling - Continuous W 500 Power Handling - Peak W 1000 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω SPORT LED SUBWOOFER Voice Coil Ø 65.5 (2.6) Magnet size D x d x h mm (in.) 156 x 80 x 40 (6.14 x 3.15 x 1.57) Weight of one component kg (lb.) 7,6 (16.8) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors D mm 265 Xmax mm 19 Re Ohm 1.8 Fs Hz 30 Le mH 0.41 Vas I 95.4 Mms g 114 Cms mm/N 0.225 BL T*m 8 Qts 1 Qes 1.1 Qms 11.1 Spl dB 89.5 A 342.9 mm 13.5 in. B 279.4 mm 11 in. C 192.8 mm 7.59 in. D 140.6 mm 5.54 in. F 52.2 mm 2.06 in. Frequency response

The new HMS 12 marine classic charcoal grille subwoofer is optimized to perform in open baffle applications for deep and punchy bass without the need to build a dedicated enclosure. HMS 12 is available at 2 or 4-ohm single voice coil versions, featuring a stunning 500 W continuous power handling. The classi grille, features built-in LEDs. Can be easily and painted the perfect color for your vessel.  The motor and suspension design is optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, thus maximizing overall system performance for unlimited sound pressure and emotion! Size mm (in.) 300 (12) Power Handling - Continuous W 500 Power Handling - Peak W 1000 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω INFINITE BAFFLE LED SUBWOOFER Voice Coil Ø 65.5 (2.6) Magnet size D x d x h mm (in.) 156 x 80 x 40 (6.14 x 3.15 x 1.57) Weight of one component kg (lb.) 7,6 (16.8) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors D mm 265 Xmax mm 19 Re Ohm 1.8 Fs Hz 30 Le mH 0.41 Vas I 95.4 Mms g 114 Cms mm/N 0.225 BL T*m 8 Qts 1 Qes 1.1 Qms 11.1 Spl dB 89.5 A 342.9 mm 13.5 in. B 279.4 mm 11 in. C 192.8 mm 7.59 in. D 140.6 mm 5.54 in. F 52.2 mm 2.06 in. Frequency response

Sport grille, featuring built-in LEDs, can be easily removed to be painted with the perfect color for your vessel. HMS subwoofers are designed to be installed without the need for a dedicated enclosure delivering powerful and precise bass in any vessel.  The motor and suspension design are optimized for high-power, infinite-baffle operation featuring long linear excursion capability for tremendous output with low-distortion.  Hertz Marine subwoofers not only add tons of bass output to your system but also relieve the main speakers from the hard work of reproducing the lowest frequency range, maximizing the overall system performance, for unlimited sound pressure and emotion!  Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 2 Depth mm (in.) 116 (4.56) No Filter Component 2Ω SPORT LED SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±16,3 (0.64) D mm 210 Xmax mm 12,3 Re Ohm 2,1 Fs Hz 43 Le mH 0,46 Vas I 30,46 Mms g 75,6 Cms mm/N 0,18 BL T*m 8,3 Qts 0,60 Qes 0,63 Qms 12,3 Spl dB 88,5 A 280 mm 11 in. B 227 mm 8.93 in. C 164 mm 6.45 in. D 116 mm 4.56 in. F 48 mm 1.88 in.

The HMS 10 B-C 10” long-throw marine subwoofer is designed for infinite baffle applications. Its 2-ohm configuration maximizes amplifier power, relieving the main speakers from reproducing low frequencies while adding deep bass output and impact to enhance overall system performance. The HMS 10 B-C features an optimized high-excursion motor assembly with a 50 mm (2”) voice coil, driven by a large magnetic structure to maintain precise control even at very high SPL levels. Engineered and tested for real-world marine conditions—including UV exposure, salt fog, vibration, water spray, thermal shock, and dust—the HMS 10 B-C is built to withstand harsh environments. A progressive aramid fiber spider with silicone-insulated lead wires ensures long-term durability and consistent performance. Corrosion-resistant gold-plated brass terminals with a protective silicone cap safeguard the wire connection point for reliable operation over time. Size mm (in.) 250 (10) Power Handling - Continuous W 250 Power Handling - Peak W 500 Impedance Ohm 2 Depth mm (in.) 191 (7.52) Voice Coil Type single No Filter Component 2Ω SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet Ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±16,3 (0.64) D mm 210 Xmax mm 12,3 Re Ohm 2,1 Fs Hz 43 Le mH 0.46 Vas I 30,46 Mms g 75.6 Cms mm/N 0.18 BL T*m 8.3 Qts 0,6 Qes 0,63 Qms 12,3 Spl dB 88,5 Physical Specs A 277 mm 10.91 in. B 230 mm 9.06 in. C 191 mm 7.52 in. D 145 mm 5.71 in. F 46 mm 1.81 in.

Hertz HMS 10 B-C The HMS 10 B long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high-level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust) HMS 10 B is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the lead wire junction point. Product Details: 10" Single 4 ohm Hertz Marine (HMS) Series Subwoofer Power Handling: Peak: 500 watts RMS: 250 watts IP65 waterjet tested certification UV-resistant and salt-fog tested Polypropylene cone with UV inhibitors Co-molded Santoprene Rubber surround Progressive-design aramid fiber spider Silicone-insulated lead wires construction FEM optimized high-excursion mobile equipment Marine-grade polymer injected basket Gold-plated corrosion-resistant brass terminals with silicone cap 2" Copper voice coil 13.5 mm Xmax Single Stacked Ferrite magnet motor structure Resonance Frequency (Fs): 41 Hz Sensitivity: 88 dB Engineered for infinite baffle application Recommended sealed box volume: 1.77 cubic feet Top-mount depth: 5.71" Cutout diameter: 9.06" Includes protective subwoofer grille 1-year Manufacturer's Warranty

The HMS 10 B  long throw 10” marine subwoofer, also available in the black option HMS 10 B-C, is engineered for infinite baffle application. It relieves the main speakers from the hard work of reproducing the lowest frequency range, adding bass output and punch to maximize the overall system performance. The FEM optimized high-excursion mobile equipment of HMS 10 B with a 50 mm (2”) voice coil is driven by a massive magnetic group, to obtain a perfect control also at very high level SPL. Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust ) HMS 10 B4-LD-W is nature-proof. The progressive design aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The gold-plated corrosion resistant brass connection terminals with silicone cap protect the leadwire junction point. Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 4 Depth mm (in.) 116 (4.56) Voice Coil Type single No Filter Component SUBWOOFER Voice Coil Ø 50 (2) Magnet size D x d x h mm (in.) 140 x 60 x 30 (5.51 x 2.36 x 1.18) Weight of one component kg (lb.) 5,1 (11.24) Magnet High density flux ferrite Cone Polypropylene with UV inhibitors Xmech mm (in.) ±19 (0.75) D mm 210 Xmax mm 13.5 Re Ohm 4.5 Fs Hz 41 Le mH 0.9 Vas I 37 Mms g 69 Cms mm/N 0.22 BL T*m 10.2 Qts 0.71 Qes 0.76 Qms 11 Spl dB 88 A 280 mm 11 in. B 227 mm 8.93 in. C 165 mm 6.5 in. D 116 mm 4.56 in. F 48 mm 1.88 in. Frequency response

Product Details: 10" Single 2 ohm Hertz Marine (HMS) Series Subwoofer Power Handling: Peak: 500 watts RMS: 250 watts IP65 waterjet tested certification UV-resistant and salt-fog tested Polypropylene cone with UV inhibitors Co-molded Santoprene Rubber surround Progressive-design aramid fiber spider Silicone-insulated lead wires construction FEM optimized high-excursion mobile equipment Marine-grade polymer injected basket Gold-plated corrosion-resistant brass terminals with silicone cap 2" Aluminum voice coil 12.3 mm Xmax Single Stacked Ferrite magnet motor structure Resonance Frequency (Fs): 43 Hz Sensitivity: 88.5 dB Engineered for infinite baffle application Recommended sealed box volume: 1.77 cubic feet Top-mount depth: 5.71" Cutout diameter: 9.06" Includes protective subwoofer grille 1-year Manufacturer's Warranty

Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps. 1. Hertz Pure Marine Certified Product stamp featuring the IP65 protection grade, ASTM-D4329 standards for UV resistance and ASTM-B117 for salt fog operability. 2. Equipped with dedicated 8” coaxial speaker featuring a long-throw 32 mm (1.26”) voice coil woofer with polypropylene cone injected with UV inhibitors and 1.4” Neodymium magnet tweeter. 3. RGB led lighting creates sophisticated atmosphere, adding tons of class to your vessel. Front RGB lighting is included built-in the front grille, while rear RGB lighting is an add-on with the specifically developed HTX RGB LOGO.1 accessory (available both in black and white color). 4. Q-OS² (Quick Orientation & Release for Sound & Safety) technology. - Durability thanks to the solid 316 Stainless Steel construction; - Tower can be quickly oriented within 18 steps (20° each) along horizontal axis for best sound projection and diffusion over the listening area; - Quick Mechanical/Electrical release for security/anti-theft and cleaning; - Multi-pole high current connection self-contained into the clamp structure; - Clamp structure includes rubber inserts for vibrations damping and fits both round roll-bar [38 mm, 76 mm (1-1/2” to 3”)] and square roll-bar or roof mounting by detaching clamp basement upper part. Optional fitting accessories available for major OEM brands. 5. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps.

Order a Quantity of 2 for a Pair, this is sold as 1 Speaker per Package   HTX 8 M-CL-W Marine Tower Coaxial Speaker (white) Are you ready to enjoy your favorite track at high output level during your daily water ski session? Hertz Marine Towers will make your sport and leisure outings unforgettable, thanks to impressive audio performance and cool color lighting. The solid 316-Stainless steel clamp mounting is ideal for Round or Square profile pipe applications where sound needs to be easily oriented and quickly released. This is possible thanks to Q-OS² (Quick Orientation & Release for Sound & Safety) patent pending technology. “Adjustable logo” allows for several tower positioning without affecting the correct Hertz logo orientation. Front and rear logo can be oriented within 64 steps. Features SALT FOG TESTED To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.  WATER JET TESTED The protection grade IP64 define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV RESISTANT According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Specifications Power Handling - Peak W 200 Power Handling - Continuous W 100 Impedance Ω 4 Frequency response Hz 45 ÷ 25k Sensitivity dB SPL 91 Woofer size mm (in.) 200 (8) Tweeter size mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet High density flux ferrite Tweeter magnet Neodymium Woofer cone Polypropylene with UV inhibitors Tweeter dome PEI

HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC,  features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.4) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 Physical Specs A 225 mm 8.86 in B 180 mm 7.09 in C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in

Hertz HMX 8 TC 8-inch Hi-End Marine Coaxial Speakers in Black (Pair) HMX 8 TW hi-performance marine coaxial speakers, also available in the black option HMX 8 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Key Features IP 65 Certification Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent. Features Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust). 1.4” Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL. Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection. Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround. Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time. FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket. Sealed built-in crossover with resettable solid-state tweeter protection circuit. Gold-plated corrosion resistant terminals.

HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 128.6 mm 5.06 in D 91 mm 3.58 in. F 37.6 mm 1.48 in.

HMX 8  S-LD-G marine coaxial speaker features a sports paintable grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 128.6 mm 5.06 in D 91 mm 3.58 in. F 37.6 mm 1.48 in.

The HMX 8 S  LD hi-performance powersport coaxial speakers with RGB LEDs lighting option is optimized to perform in infinite baffle, with a solid bass and an outstanding output.  The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection.  The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component POWERSPORTS COAX RGB LED Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in.

The HMX 8 S hi-performance powersport coaxial speakers is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component Powersport coaxial Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in. Frequency response

HMX 8  LD-TW hi-performance marine coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 8 LD-TC,  feature a tone-on-tone front mesh matching the grille colour. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL.The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in D 91 mm 3.58 in. F 32 mm 1.26 in.

The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option,  also available in the black option HMX 8-LD-C,  is optimized to perform in infinite baffle, with a solid bass and an outstanding output.  The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection.  The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. HMX 8 LD / C224 (8.8) mm (in.) | 123 (4.84) mm (in.) | Hi-end Led Coax | 200 W | 4 Ohm The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option,  also available in the black option HMX 8-LD-C,  is optimized to perform in infinite baffle, with a solid bass and an outstanding output.  The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection.  The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in.

Hertz HMX 8-LD - 8 Inch Speakers RGB LED 200W Pair The HMX 8 LD White 8" hi-performance marinet coaxial speakers with RGB LEDs lighting option,  are optimized to perform in infinite baffle, with a solid bass and an outstanding output. IP Protection: IP65 Peak Power Handling: 200 Watts RMS Power: 100 Watts Impedance: 4Ω Frequency response: 45Hz - 25kHz Sensitivity SPL: 91dB Woofer size: 200mm (8") Tweeter size: 36mm (1.4") Woofer Voice Coil Ø: 32mm (1.26") Tweeter voice coil Ø: 20mm (0.8") Supplied as a pair The HMX 8 LD hi-performance marinet coaxial speakers with RGB LEDs lighting option, are optimized to perform in infinite baffle, with a solid bass and an outstanding output. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. RGB Multicolour Built-in RGB led lighting creates sophisticated atmosphere, adding a touch of class to your vessel. Use the optional HMRGB1BK RGB Controller for full 256 colour step control, lighting presets and music tempo control. Alternatively the speakers can be permanently set to either Red, Green, Blue, Yellow, Magenta, Cyan or White lighting via a 12VDC Supply. Water Jet Tested The protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV Resistant According to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Salt Fog Tested To satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent.

The HMX 8 hi-performance marine coaxial speakers, also available in the black option HMX 8-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. HMX 8 / C224 (8.8) mm (in.) | 123 (4.84) mm (in.) | Hi-end Coax | 200 W | 4 Ohm The HMX 8 hi-performance marine coaxial speakers, also available in the black option HMX 8-C, is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 123 mm 4.84 in. D 91 mm 3.58 in. F 32 mm 1.26 in.

HMX 6.5 LD-TC hi-performance marine coaxial speakers with RGB LEDs lighting option, feature a tone-on-tone front mesh matching the grille color. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL. The HMX tweeters feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Product Details: 6-1/2" 2-way Coaxial Marine Speakers Power Handling: Peak: 300 watts per pair / 150 watts each RMS: 150 watts per pair / 75 watts each IP65 marine grade rating Engineered and tested for UV, salt-fog, vibrations, water spray, thermal shock, and dust conditions UV-Resistant Polypropylene cone material Co-molded Santoprene Rubber speaker surround 1.4" PEI (Polyetherimide) Dome tweeters Optimized tweeter faceplate and acoustic lens Sound-transparent stainless steel tweeter mesh grille Aramid fiber spider with silicone-insulated lead wires FEM optimized high-excursion mobile equipment Sealed built-in crossover with resettable solid-state tweeter protection circuit Gold-plated corrosion resistant terminals Multi-color RGB LED illumination (Hertz HM RGB 1 BK remote control sold separately) 1.26" voice coil Impedance: 4 ohm Top-mount Depth: 2.72" Cutout Dimensions: 5.04" Frequency Response: 50 - 25,000 Hz Sensitivity: 89 dB Authorized Internet Dealer 1-year Manufacturer's Warranty Priced Per Pair

HMX 6.5 LD-C - Marine Coax RGB LED The high-performance marine coaxial speakers HMX 6.5 LD with RGB-LED lighting option, which are also available in the black option HMX 6.5-LD-C, are optimized for an infinite baffle performance with solid bass and excellent output . The HMX tweeters have an acoustic lens that is optimized for optimal off-axis scattering and maximum sound pressure. The attractive tweeter grille made of stainless steel ensures perfect high-frequency transmission and solid protection. The RGB LED lighting circuit is integrated under the tweeter and protected by a transparent polypropylene cover that serves as light scattering. The UV-resistant polypropylene cone, which, together with the basket and the grille, into which a high-temperature and UV-resistant polymer was injected, was overmoulded with Santoprene rubber, neutralizes water, dust and mud. The aramid fiber spider with silicone-insulated connecting wires ensures a long service life and constant performance over time. The mobile high-performance device is driven by a massive magnet group to deliver a high, undistorted sound pressure. quantity: 1 pair Lightning: Freely adjustable Housing color: black Impedance (in Ohm): 4,0 Speaker Type: Coax-System Speaker Features: 2 ways, marine compatible Peak Power (in Watt): 150 Power RMS (in Watt): 75 Product group: Speaker

HMX 6.5 TW hi-performance marine coaxial speakers, also available in the black option HMX 6.5 TC,  features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 75 Power Handling - Peak W 150 Impedance Ohm 4 Depth mm (in.) 95,6 (3.76) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 25k Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±6,65 (0.26) D mm 125 Re Ohm 3,5 Fs Hz 65 Le mH 0,53 Vas I 8,8 Mms g 14 Cms mm/N 0,4 BL T*m 5,2 Qts 0,7 Qes 0,75 Qms 11,5 Spl dB 89 A 172,2 mm 6.78 in. B 128 mm 5.04 in. C 95,6 mm 3.76 in. D 69 mm 2.72 in. F 26,6 mm 1.05 in.

Hertz HMX 6.5 TC 6.5-inch Hi-End Marine Coaxial Speakers in Black (Pair) HMX 6.5 TW hi-performance marine coaxial speakers, also available in the black option HMX 6.5 TC, features a tone-on-tone stainless steel front mesh matching the grille colour. Coaxial speaker is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Key Features IP 65 Certification Water Jet TestedThe protection grade IP65 for speakers define all the Hertz Marine products as totally protected against water jets of different entities, making them highly performant in the marine environment. UV ResistantAccording to the severe ASTM-D4329 standards for UV resistance, all the materials used for Hertz Marine products are designed to face long time exposition to UV radiations while cruising on the open sea. Salt Fog TestedTo satisfy the standards required by ASTM-B117, Hertz Marine products are tested with massive salt fog spray to ensure a complete resistance to corrosion, typical of this atmospheric agent. Features Engineered and tested for the real environment of application (UV, salt-fog, vibrations, water spray, thermal shock, dust). 1.4" Neodymium magnet tweeter featuring a PEI material dome combined with faceplate and acoustic lens optimized for best off-axis dispersion and highest SPL. Sound-transparent tone-on-tone stainless steel tweeter mesh grille providing efficient high-frequency transfer, attractive look and a rock-solid protection. Long-throw 25mm (1”) voice coil woofer fine-tuned for infinite baffle application featuring polypropylene cone injected with UV inhibitors and co-molded Santoprene surround. Aramid fiber spider with silicone-insulated lead wires ensuring durability and constant performance over time. FEM optimized high-excursion mobile equipment driven by a massive magnetic group encapsulated into a marine-grade polymer injected basket. Sealed built-in crossover with resettable solid-state tweeter protection circuit. Gold-plated corrosion resistant terminals.

HMX 6.5  S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 75 Power Handling - Peak W 150 Impedance Ohm 4 Depth mm (in.) 95,6 (3.76) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 25k Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±6,65 (0.26) D mm 125 Re Ohm 3,5 Fs Hz 65 Le mH 0,53 Vas I 8,8 Mms g 14 Cms mm/N 0,4 BL T*m 5,2 Qts 0,7 Qes 0,75 Qms 11,5 Spl dB 89 A 172,2 mm 6.78 in. B 128 mm 5.04 in. C 95,6 mm 3.76 in. D 69 mm 2.72 in. F 26,6 mm 1.05 in.

HMX 6.5  LD-TW hi-performance marine coaxial speakers with RGB LEDs lighting option, also available in the black option HMX 6.5 LD-TC,  feature a tone-on-tone front mesh matching the grille colour. The tweeter acoustic lens optimizes off-axis dispersion and maximized SPL.The RGB LED lighting circuit is integrated below the tweeter, protected by a Polypropylene transparent cover acting as light diffusion. The UV-resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Component HI-END LED COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 75 Power Handling - Peak W 150 Impedance Ohm 4 Depth mm (in.) 95,6 (3.76) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 25k Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±6,65 (0.26) D mm 125 Re Ohm 3,5 Fs Hz 65 Le mH 0,53 Vas I 8,8 Mms g 14 Cms mm/N 0,4 BL T*m 5,2 Qts 0,7 Qes 0,75 Qms 11,5 Spl dB 89 A 172,2 mm 6.78 in. B 128 mm 5.04 in. C 95,6 mm 3.76 in. D 69 mm 2.72 in. F 26,6 mm 1.05 in.

HMX 6.5  S-LD-G marine coaxial speaker features a sports paintable grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 75 Power Handling - Peak W 150 Impedance Ohm 4 Depth mm (in.) 95,6 (3.76) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 25k Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±6,65 (0.26) D mm 125 Re Ohm 3,5 Fs Hz 65 Le mH 0,53 Vas I 8,8 Mms g 14 Cms mm/N 0,4 BL T*m 5,2 Qts 0,7 Qes 0,75 Qms 11,5 Spl dB 89 A 172,2 mm 6.78 in. B 128 mm 5.04 in. C 95,6 mm 3.76 in. D 69 mm 2.72 in. F 26,6 mm 1.05 in.

The HMX 6.5  hi-performance marine coaxial speakers, also available in the black option HMX 6.5-C,  is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure.   Component HI-END COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 75 Power Handling - Peak W 150 Impedance Ohm 4 Depth mm (in.) 95,6 (3.76) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 25k Woofer Magnet size D x d x h mm (in.) 78,5 x 32 x 17 (3.09 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±6,65 (0.26) D mm 125 Re Ohm 3,5 Fs Hz 65 Le mH 0,53 Vas I 8,8 Mms g 14 Cms mm/N 0,4 BL T*m 5,2 Qts 0,7 Qes 0,75 Qms 11,5 Spl dB 89 A 172,2 mm 6.78 in. B 128 mm 5.04 in. C 95,6 mm 3.76 in. D 69 mm 2.72 in. F 26,6 mm 1.05 in.

The HMX 6.5 hi-performance marine coaxial speakers is optimized to perform in infinite baffle, with a solid bass and an outstanding output. The  tweeter feature an acoustic lens optimized for best off-axis dispersion and maximized SPL. The attractive stainless steel tweeter mesh grille provides perfect high-frequency transfer and a rock-solid protection. The UV resistant polypropylene cone co-molded with Santoprene rubber surround together with the basket and grille injected with a Hi-temperature and UV resistant polymer neutralize water, dust and mud. The aramid fiber spider with silicone-insulated lead wires ensures durability and constant performance over time. The high-excursion mobile equipment is driven by a massive magnetic group, to deliver high undistorted sound pressure. Data table Power Handling - Peak W 150 Power Handling - Continuous W 75 Impedance Ω 4 Frequency response Hz 50 ÷ 25k Sensitivity dB SPL 90 Woofer size mm (in.) 165 (6.5) Tweeter size mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter voice coil Ø mm (in.) 20 (0.8) Woofer magnet High density flux ferrite Tweeter magnet Neodymium Woofer cone Polypropylene with UV inhibitors Tweeter dome PEI

Venezia V6 is the first six-channel Hertz marine amplifier, featuring the impressive power of 160 W x 6 (4Ω), delivering the output levels needed in the marine environment! Hertz Advanced Class D technology maximizes efficiency and power while minimizing heat and electromagnetic radiation - enhancing sound quality that reaches new highs with Hi-Res certification! High-powered channels with bridging capability. Venezia V6 is engineered and tested for marine applications (UV, salt-fog, vibrations, high/low temperature, thermal shock) and has obtained the IPX2 certification. The Safe-Lock Input, Output, and Power connections streamline installation and enhance durability in the field. The fanless convection cooling system is integrated into the cast heat-sink chassis. The balanced fully-differential input circuitry rejects electromagnetic noise and interference. The powerful and flexible preamp filter options are far beyond most mobile amplifier capabilities. Last but not least, Venezia V6 is fully protected by short-circuit, overload, and thermal protections - with auto-resetting. Channels 6 - 5 - 4 - 3 POWER SUPPLY Power supply voltage 9 ÷ 16 VDC ldling current (power ON/OFF): 1.8 A / 0.04 mA Consumption@ 2Ω, 14.4 VDC (Max Musical Power): 75 A Remote In: 7 ÷ 15 VDC - 1 mA AMPLIFIER STAGE Distorsion - THD (100Hz @ 4Ω): <0,06% Bandwidth: 10 ÷ 42 kHz S/N Ratlo (A welghted @ 1 V): 100 dB Damping factor (100Hz @ 4Ω) 130 Pre-ln sensitivity: 0.2 ÷ 5 VRMS Pre-ln impedance: 10 kΩ Load impedance (MIN)@6Ch:@5Ch:@4Ch:@3Ch: 2Ω2Ω + 2Ω + 2Ω +2Ω + 4Ω2Ω + 2Ω +4Ω + 4Ω4Ω Adjustable Crossovers yes OUTPUT POWER (RMS) @ 14.4 VDC, THD 1% 6Ch 160 W x 6 (4Ω) 6Ch 290 W x 6 (2Ω) 5Ch 160 x 4 (4Ω) + 580 x 1 (4Ω) 5Ch 290 x 4 (2Ω) + 580 x 1 (4Ω) 4Ch 160 x 2 (4Ω) + 580 x 2 (4Ω) 4Ch 290 x 2 (2Ω) + 580 x 2 (4Ω) 3Ch 580 x 3 (4Ω) Total Power 1740 W lnputs: A Ch. Pre inB Ch. Pre inC Ch. Pre in Pre Out: No Ch. A filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. B filters: MONO IN (on/off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Band-pass: 50 ÷ 500 Hz / 500 Hz ÷ 5 kHz @ 12 dB/Oct Ch. C filters: MONO IN (on-off) Yes By-pass Yes Hi-pass: 50 ÷ 500 Hz @ 12 dB/Oct Lo-pass: 50 ÷ 500 Hz @ 12 dB/Oct mm in A 330 13 B 300 11.18 C 200 7.87 D 170 6.7 E 54 2.12 kg lb Weight: 3.72 8.2