HERTZ Mille Legend 10 HERTZ Mille Legend 10
HERTZ Mille Legend 10" 1400W 4 Ohm Svc Subwoofer (Ml... $1,154.99
Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse. For this reason, the HertzAudioVideo R&D created ML 2500.3 Legend car audio subwoofer. During the long development phase, the designers set themselves just one ambitious goal: to transfer the emotions of a live performance to the car environment. Thanks to a completely renewed design, ML2500.3 car audio subwoofers have extremely compact size and are optimized to play in enclosures with reduced boxes. This choice of design combines two requirements hard to achieve up to now: reference performance and ease of installation. Size mm (in.) 250 (10) Power Handling - Continuous W 700 Power Handling - Peak W 1400 Impedance Ohm 4 No Filter Component Subwoofers Voice Coil Ø 100 (4) Frequency Response Hz 27 ÷ 500 Magnet size D x d x h mm (in.) 95 x 28 x 6 D x d x h (in.) (3.7 x 1.1 x 0.24) Weight of one component kg (lb.) 7,5 (16.53) Magnet Neodymium Cone Pressed-pulp cone with mineral powders Xmech mm (in.) ±27 (1.06) D mm 212,5 Xmax mm 17 Re Ohm 2,75 Fs Hz 33 Le mH 1,05 Vas I 23,5 Mms g 175 Cms mm/N 0,125 BL T*m 12,6 Qts 0,63 Qes 0,65 Qms 7,5 Spl dB 88 A 268 mm 10.55 in. B 234 mm 9.21 in. C 159 mm 6.26 in. D 137 mm 5.4 in. E 274 mm 10.78 in. F 50 mm 1.97 in.
BUY NOW
HERTZ Mille Legend 8 HERTZ Mille Legend 8
HERTZ Mille Legend 8" 1400W 4 Ohm Svc Subwoofer (Ml... $1,049.99
Music fans who attend live concerts know well the emotions that low undistorted frequencies without dynamic compression can arouse. For this reason, the HertzAudioVideo R&D created ML 2000.3 Legend car audio subwoofer. During the long development phase of this car audio speakers, the designers set themselves just one ambitious goal: to transfer the emotions of a live performance to the car environment. Thanks to a completely renewed design, ML2000.3 car audio subwoofers have extremely compact size and are optimized to play in enclosures with reduced boxes. This choice of design combines two requirements hard to achieve up to now: reference performance and ease of installation. Size mm (in.) 200 (8) Power Handling - Continuous W 700 Power Handling - Peak W 1400 Impedance Ohm 4 Voice Coil Type single No Filter Component Subwoofers Voice Coil Ø 100 (4) Frequency Response Hz 30 ÷ 600 Magnet size D x d x h mm (in.) 95 x 28 x 5 (3.7 x 1.1 x 0.2) Weight of one component kg (lb.) 6,120 (13.5) Magnet Neodymium Cone Pressed-pulp cone with mineral powders Xmech mm (in.) ±23 (0.9) D mm 165 Xmax mm 13 Re Ohm 2,7 Fs Hz 40 Le mH 0,72 Vas I 9,5 Mms g 110 Cms mm/N 0,15 BL T*m 11 Qts 0,56 Qes 0,63 Qms 5 Spl dB 86 A 217 mm 8.54 in. B 185 mm 7.28 in. C 138 mm 5.43 in. D 117 mm 4.6 in. E 223 mm 8.78 in. F 46 mm 1.8 in.
BUY NOW
HERTZ Mille Legend 7 HERTZ Mille Legend 7
HERTZ Mille Legend 7" Woofer Component - Pair (Ml 1800.3... $994.99
ML 1800.3 Legend car audio woofers has been thought and designed for the enthusiasts attending contests who need a component merging the timbre accuracy of ML 1650.3 Legend to a wider extension to the low frequencies thanks to the large emission surface, higher power handling and control which only a 50 mm voice coil can ensure. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. Like in the suspensions of competition cars, the surround must stand the most extreme working conditions to ensure maximum stability and symmetry at high excursions, and so to achieve impact and extension to the low frequency range. For this reason, the electro-acoustic designers developed a new surround-basket gluing system called “Boundary Free Surround”. This technology, provides the ability to achieve wider emission surface of the cone compared to speakers with same diameter; that way, the cone manages to move a bigger mass of air, so it produces more acoustic pressure. Component Woofer Size mm (in.) 180 (7) Power Handling - Continuous W 200 Power Handling - Peak W 400 Impedance Ohm 4 Voice Coil Ø 50 (2) Frequency Response Hz 38 - 6k Magnet size D x d x h mm (in.) 90 x 60,7 x 5 (3.54 x 2.39 x 0.2) Weight of one speaker kg (lb.) 1,71 (3.77) Magnet Neodymium Cone Pressed-pulp cone with cotton fibres Xmech mm (in.) ±10 (0.4) D mm 149 Re Ohm 3,2 Fs Hz 60 Le mH 0,35 Vas I 12,2 Mms g 27,5 Cms mm/N 0,3 BL T*m 7,8 Qts 0,5 Qes 0,53 Qms 7,22 Spl dB 93 A 184 mm 7.24 in. B 160 mm 6.3 in. C 88 mm 3.46 in. D 76 mm 3 in. E 189,2 mm 7.45 in. F 27 mm 1.06 in.
BUY NOW
HERTZ Mille Legend 6.5 HERTZ Mille Legend 6.5
HERTZ Mille Legend 6.5" Woofer Component - Pair (Ml 1650.3... $849.00
During these past few years the Mille line car audio woofers have been the choice of many enthusiasts looking for extreme performance; with ML 1650.3 Legend the Hertz designers increased again the limits of achievable performance for components designed for door installation. To get to these results, the R&D staff performed extensive in-car voicing sessions, after building several prototypes with the FEA simulation method and testing them with a wide array of measurements carried out with the Klippel® suite. To ensure extraordinary power handling and very high thermal stability even with tracks especially rich of bass frequencies, ML 1650.3 Legend features a 36 mm mobile voice coil. This size ensures the best compromise between power handling and high frequency response.  The cone geometry has been subject of in-depth studies with FEA simulations and measurements performed with the Klippel Scan Vibrometer; all that led to the optimization of the V-cone® profile. In the subwoofers and in the woofers, to reproduce the lowest frequency spectrum, the cone needs to move a remarkable amount of air, so it is forced to make long excursions moving like a piston does. The V-cone® profile prevents the cone from deforming during its course, ensuring that the “piston” works in a correct position, maximizing the production of acoustic pressure. Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 125 Power Handling - Peak W 250 Impedance Ohm 4 Voice Coil Ø 36 (1.4) Frequency Response Hz 40 - 6.5k Magnet size D x d x h mm (in.) 80 x 45 x 5 (3.15 x 1.77 x 0.2) Weight of one speaker kg (lb.) 1,29 (2.84) Magnet Neodymium Cone Pressed-pulp cone with cotton fibres Xmech mm (in.) ±9 (0.35) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,24 Vas I 8,3 Mms g 17,5 Cms mm/N 0,3 BL T*m 7 Qts 0,52 Qes 0,52 Qms 5,3 Spl dB 93 A 165 mm 6.5 in. B 141 mm 5.55 in. C 80 mm 3.15 in. D 69 mm 2.71 in. E 170 mm 6.7 in. F 26 mm 1.02 in.
BUY NOW
HERTZ Dieci 12 HERTZ Dieci 12
HERTZ Dieci 12" 1000W 4 Ohm Dvc Subwoofer (Ds 30.3) $189.99
Hertz DS 30.3 car audio subwoofers box offers high efficiency and exceptional power handling. Equipped with a polypropylene membrane and butyl rubber surround, they provide high excursion with minimal distortion. An efficient cooling system ensures optimal heat dissipation, increasing their reliability.The Dieci subwoofers are designed for use in compact sealed or reflex enclosures; thanks to an exclusive, carefully thought-out design, they can be used in any installation. Size mm (in.) 300 (12) Power Handling - Continuous W 250 Power Handling - Peak W 1000 Impedance Ohm 4 Voice Coil Type single No Filter Component Subwoofer Voice Coil Ø 38 (1.5) Frequency Response Hz 28 ÷ 300 Magnet size D x d x h mm (in.) 115 x 50 x 25 D x d x h (in.) (4.5 x 2 x 1) Weight of one component kg (lb.) 4 (8.8) Magnet High density flux ferrite Cone Polypropylene with Mica injection Xmech mm (in.) 9 D mm 258 Xmax mm 9 Re Ohm 3,3 Fs Hz 32 Le mH 2,2 Vas I 70 Mms g 133 Cms mm/N 0,18 BL T*m 11,2 Qts 0,62 Qes 0,71 Qms 5,14 Spl dB 91 A 306 mm 12 in. B 279 mm 11 in. C 132 mm 5.2 in. D 120 mm 4.7 in.
BUY NOW
HERTZ Dieci 8 HERTZ Dieci 8
HERTZ Dieci 8" 440W Active Underseat Subwoofer (Dba 201 F) $600.00
The DBA 201 F flat active subwoofer enclosure optimized with FEM simulation ensures superior performance, maximizing the subwoofer output with a super flat size. The massive magnet of the 8 in. driver provides optimal control during the highest cone excursion.Extra full set of controls to fine-tune the in-car performanceThe built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 F to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 F and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.Auto turn-on and standby modeThe built-in audio sense circuit allows the DBA 201 F to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available. Size mm (in.) 200 (8) Power Handling - Continuous W 220 Power Handling - Peak W 440 Impedance Ohm 0.4 Design Super Flat Sealed Voice Coil Ø 38.6 (1.52) mm (in.) Frequency Response Hz 32 ÷ 400 Magnet size D x d x h mm (in.) 110 x 45 x 17 (4.33 x 1.78 x 0.67) Weight of one component kg (lb.) 4.3 (9.48) Magnet High Density Flux Ferrite Cone Pressed paper Voice Coil Type Copper Operating voltage VDC (Fuse) 6.5 ÷ 18 (15A) Start - Stop voltage VDC 6 Idling current A (Power OFF) 260 m (1 m) Consumption @ 14,4 VDC Max musical power A 8.5 Remote IN Turn on VDC (Current) 4 (1 mA) PRE input signal Turn ON VRMS 10 mV SPK input DC Turn ON VDC 2 Distortion - THD @ 100 Hz % 0.15 Bandwidth Hz 15 - 150 S/N ratio dBA 100 Output power (RMS) @ 14,4 VDC, 1% THD W 220 PRE input signal VRMS (impedance) 0.2 ÷ 5 (10kΩ) SPK input signal VRMS (impedance) 1.2 ÷ 30 (6Ω) LO-PASS Filter @ 24 dB Oct adjustable Hz 50 ÷ 150 Subsonic Filter @ 24 dB Oct Fixed Hz 15 Phase switch 0 / 180° Bass Boost @45 Hz dB 0 ÷ 6 Sub remote volume control dB 0 ÷ -15 (HRC 01 included) mm in A 345 13.58 B 245 9.64 C 79 3.11
BUY NOW
HERTZ Dieci 8 HERTZ Dieci 8
HERTZ Dieci 8" 440W Active Loaded Subwoofer Box (Dba 201) $629.99
The DBA 201 active subwoofer box features a double passive radiator enclosure made with solid MDF and optimized with FEM simulation to ensure superior performance, maximizing the subwoofer output. The massive magnet of the 8-in. driver provides optimal control during the highest cone excursion.Extra full set of controls to fine-tune the in-car performanceThe built-in 24 dB/Oct. low-pass crossover filter with a variable cutting corner frequency (50÷150 Hz) allows you to perfectly match the DBA 201 to your speaker system. Adjustable bass boost (0÷6 dB @ 45Hz) can add bass output as you prefer, allowing correction for OEM sound equalization. With the phase inverter (0-180°), you can optimize phase alignment between the DBA 201 and your speaker system, regardless of the subwoofer’s position in the car. The subsonic filter (15 Hz @ 24 dB/Oct) protects the cone from over-excursion and amplifiers from overheating. The input sensitivity control is the perfect tool to maximize the overall system output level while preventing clipping.Auto turn-on and standby modeThe built-in audio sense circuit allows the DBA 201 to turn on and timeout to standby mode automatically. You can switch off the audio sense function when a remote turn-on wire is available. Size mm (in.) 200 (8) Power Handling - Continuous W 220 Power Handling - Peak W 440 Impedance Ohm 0.4 Design Active subwoofer box with double passive radiators Voice Coil Ø 38.6 (1.52) mm (in.) Frequency Response Hz 32 ÷ 400 Magnet size D x d x h mm (in.) 115 x 47 x 25 (4.5 x 1.8 x 0.98) Weight of one component kg (lb.) 6.7 (10.54) Magnet High Density Flux Ferrite Cone Pressed paper Voice Coil Type Copper Operating voltage VDC (Fuse) 6.5 ÷ 18 (15A) Start - Stop voltage VDC 6 Idling current A (Power OFF) 260 m (1 m) Consumption @ 14,4 VDC Max musical power A 8.5 Remote IN Turn on VDC (Current) 4 (1 mA) PRE input signal Turn ON VRMS 10 mV SPK input DC Turn ON VDC 2 Distortion - THD @ 100 Hz % 0.15 Bandwidth Hz 15 - 150 S/N ratio dBA 100 Output power (RMS) @ 14,4 VDC, 1% THD W 220 PRE input signal VRMS (impedance) 0.2 ÷ 5 (10kΩ) SPK input signal VRMS (impedance) 1.2 ÷ 30 (6Ω) LO-PASS Filter @ 24 dB Oct adjustable Hz 50 ÷ 150 Subsonic Filter @ 24 dB Oct Fixed Hz 15 Phase switch 0 / 180° Bass Boost @45 Hz dB 0 ÷ 6 Sub remote volume control dB 0 ÷ -15 (HRC 01 included) mm in A 291 11.46 B 315.5 12.42 C 264 10.39
BUY NOW
HERTZ Cento 12 HERTZ Cento 12
HERTZ Cento 12" 700W 4 Ohm Svc Subwoofer (Cs 300... $354.99
The new CS 300 s4 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 32 l. for the 30 cm (12 in.) CS 300 model.The 4Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 300 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car! Size mm (in.) 300 (12) Power Handling - Continuous W 350 Power Handling - Peak W 700 Impedance Ohm 4 No Filter Component SUBWOOFER Voice Coil Ø 35 (1.38) Magnet size D x d x h mm (in.) 134 x 45 x 34 (5.28 x 1.77 x 1.34) Weight of one component kg (lb.) 4,844 (10.68) Magnet High density flux ferrite Cone Polypropylene Xmech mm (in.) 16,5 (0.65) D mm 267,7 Xmax mm 12,5 Re Ohm 3,6 Fs Hz 25 Le mH 3,64 Vas I 93,42 Mms g 193 Cms mm/N 0,21 BL T*m 14,8 Qts 0,47 Qes 0,50 Qms 7,2 Spl dB 86,5 A 318 mm 12.52 in. B 281 mm 11.06 in. C 147 mm 5.79 in. D 130 mm 5.12 in. E 308 mm 12.13 in. F 28,3 mm 1.11 in.
BUY NOW
HERTZ Cento 12 HERTZ Cento 12
HERTZ Cento 12" 700W 2 Ohm Svc Subwoofer (Cs 300... $354.99
The new CS 300 s2 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 32 l. for the 30 cm (12 in.) CS 300 model.The 2Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 300 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car! Size mm (in.) 300 (12) Power Handling - Continuous W 350 Power Handling - Peak W 700 Impedance Ohm 2 No Filter Component SUBWOOFER Voice Coil Ø 35 (1.38) Magnet size D x d x h mm (in.) 134 x 45 x 34 (5.28 x 1.77 x 1.34) Weight of one component kg (lb.) 4,844 (10.68) Magnet High density flux ferrite Cone Polyproyilene Xmech mm (in.) 16,5 (0.65) D mm 267,01 Xmax mm 12,5 Re Ohm 2,2 Fs Hz 25 Le mH 2,8 Vas I 87,25 Mms g 205 Cms mm/N 0,20 BL T*m 12 Qts 0,46 Qes 0,49 Qms 7,2 Spl dB 86,5 A 318 mm 12.52 in. B 281 mm 11.06 in. C 147 mm 5.79 in. D 130 mm 5.12 in. E 308 mm 12.13 in. F 28,3 mm 1.11 in.
BUY NOW
HERTZ Cento 10 HERTZ Cento 10
HERTZ Cento 10" 600W 4 Ohm Svc Subwoofer (Cs 250... $314.99
The new CS 250 s4 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 16 l. for the 25 cm (10 in.) CS 250 model.The 4Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 250 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car! Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 4 No Filter Component SUBWOOFER Voice Coil Ø 35 (1.38) Magnet size D x d x h mm (in.) 120 x 45 x 34 (4.72 x 1.77 x 1.34) Weight of one component kg (lb.) 3,795 (8.37) Magnet High density flux ferrite Cone Polyproyilene Xmech mm (in.) 16,5 (0.65) D mm 216 Xmax mm 12,5 Re Ohm 3,6 Fs Hz 30 Le mH 3,33 Vas I 34,5 Mms g 154 Cms mm/N 0,18 BL T*m 13,7 Qts 0,52 Qes 0,56 Qms 9,4 Spl dB 84 A 270 mm 10.63 in. B 231 mm 9.09 in. C 132 mm 5.2 in. D 115 mm 4.53 in. E 260 mm 10.24 in. F 28,3 mm 1.11 in.
BUY NOW
HERTZ Cento 10 HERTZ Cento 10
HERTZ Cento 10" 600W 2 Ohm Svc Subwoofer (Cs 250... $314.99
The new CS 250 s2 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience! The R & D team, always at the forefront in the search for innovative solutions, with unfailing effort, succeeded in obtaining very powerful bass frequencies from ultra-compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 16 l. for the 25 cm (10 in.) CS 250 model.The 2Ω single voice coil configuration offers maximum compatibility with any type of amplification and an enclosure that houses more than one subwoofer.The reduced depth, the compact magnetic group and the lack of rear decompression hole allow the box to be shaped around the subwoofer obtaining a depth close to the one of a speaker for maximum freedom of installation on any type of car.The special cooling system of the six-layer voice coil keeps the operating temperature within an optimal range even in case of extended listening sessions at high acoustic pressure.An innovative system of dynamic fluid optimization and turbulence reduction, obtained thanks to the spider support acting as an air conduct towards the venting holes on the basket, drastically reduces the acoustic distortions generated by the air compression at high excursions.The cone geometry, the suspension and the spider have been designed using FEM (Finite Element Method) simulations to obtain the best performance configuration that guarantees control and low distortions even at high mechanical excursions of the mobile group.The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection even in installations with multiple subwoofers.The subwoofer is also provided with an elegant high resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.The optional CG 250 grille in robust black metal mesh provide total protection for the subwoofer and an appealing look thanks to the Hertz diamond aluminium logo for better integration into the car.With the Cento subwoofers even the younger enthusiasts will enjoy an exciting reproduction of low frequencies in the car! Size mm (in.) 250 (10) Power Handling - Continuous W 300 Power Handling - Peak W 600 Impedance Ohm 2 No Filter Component SUBWOOFER Voice Coil Ø 35 (1.38) Magnet size D x d x h mm (in.) 120 x 45 x 34 (4.72 x 1.77 x 1.34) Weight of one component kg (lb.) 3,795 (8.37) Magnet High density flux ferrite Cone Polyproyilene Xmech mm (in.) 16,5 (0.65) D mm 216 Xmax mm 12,5 Re Ohm 2,2 Fs Hz 30 Le mH 2,38 Vas I 32 Mms g 166 Cms mm/N 0,17 BL T*m 11,5 Qts 0,49 Qes 0,52 Qms 9,4 Spl dB 84 A 270 mm 10.63 in. B 231 mm 9.09 in. C 132 mm 5.2 in. D 115 mm 4.53 in. E 260 mm 10.24 in. F 28,3 mm 1.11 in.
BUY NOW
HERTZ Cento 8 HERTZ Cento 8
HERTZ Cento 8" 300W 4 Ohm Svc Subwoofer (Cs 200... $344.99
Hertz CS 200 S4 Cento subwoofer is the perfect enhancement to every sound system, to fully enjoy the authentic Hertz Sound Experience!   The R&D team, always at the forefront in the search for innovative solutions, with unfailing effort succeeded in obtaining powerful bass frequencies from compact sealed enclosures, optimizing all the electroacoustic parameters according to the target set: high performance with boxes starting from 9,6 l (0.33 CF). The reduced depth, the compact magnetic group, and the lack of rear decompression hole allow the box to be shaped around the subwoofer, obtaining a depth almost the same as the driver itself, for maximum freedom of installation on any type of car. The special cooling system for the six-layer voice coil keeps the operating temperature within the optimal range, even in case of extended listening sessions at high sound pressure.  An innovative system of dynamic fluid optimization and turbulence reduction was achieved, thanks to the spider support acting as an air duct towards the venting holes on the basket. This drastically reduces the acoustic distortions generated by air compression at high excursions.  The cone geometry, the suspension, and the spider have been optimized using FEM (Finite Element Method) simulations to obtain the best performance configuration, which guarantees control and low distortions even at high mechanical excursions of the mobile group.  The terminal block uses solid push connectors that accept cables up to 8 AWG to offer low wiring resistance and maximum ease of connection - even in installations with multiple subwoofers. The subwoofer is also provided with an elegant high-resistance ABS plastic gasket that allows the grille to be fixed to finish the installation.  The optional grille in robust black metal mesh offers total protection for the subwoofer, and an appealing look - thanks to the Hertz diamond aluminum logo. With the Cento subwoofers, even the younger enthusiasts will enjoy the exciting reproduction of low frequencies in the car! Size mm (in.) 200 (8) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Voice Coil Type single No Filter Component SUBWOOFER Voice Coil Ø 35 (1.38) Magnet size D x d x h mm (in.) 120 x 50 x 28 (4.72 x 1.97 x 1.1) Weight of one component kg (lb.) 2,87 (1.30) Magnet High density flux ferrite Cone Polyproyilene Xmech mm (in.) 11,5 (0.45) D mm 172 Xmax mm 9 Re Ohm 3,3 Fs Hz 40 Le mH 1,7 Vas I 13,7 Mms g 76,8 Cms mm/N 0,21 BL T*m 10,6 Qts 0,52 Qes 0,58 Qms 5 Spl dB 84 A 213 mm 8.39 in. B 177 mm 6.97 in. C 114 mm 4.49 in. D 101 mm 3.98 in. E 201 mm 7.92 in. F 24 mm 0.95 in.
BUY NOW
HERTZ Cento 6.5 HERTZ Cento 6.5
HERTZ Cento 6.5" Woofer Component - Pair (C 165) $199.99
Much time was invested in the research of the perfect material for the C 165 woofer cones: through a long process of customisation of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions. Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 70 Power Handling - Peak W 210 Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 55 ÷ 7k Magnet size D x d x h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.59) Weight of one speaker kg (lb.) 0,96 (2.12) Magnet High density flux ferrite Cone Semi-pressed paper+ Mica Xmech mm (in.) 4,9 (0.19) D mm 131,5 Re Ohm 3,2 Fs Hz 60 Le mH 0,2 Vas I 13,24 Mms g 13,9 Cms mm/N 0,51 BL T*m 4,9 Qts 0,59 Qes 0,69 Qms 3,9 Spl dB 93 A 165 mm 6.5 in. B 142 mm 5.59 in. C 71 mm 2.8 in. D 62,5 mm 2.46 in. E 171 mm 6.73 in. F 24 mm 0.94 in.
BUY NOW
HERTZ Spl Show 6X9 HERTZ Spl Show 6X9
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx... $609.99
SX 690 NEO.1 is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and a 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on a polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.   The provided MPG 690 grille is made of a high-resistance ABS plastic structure with a metallic finish and a protective metal mesh. Component SPL COAXIAL Size mm (in.) in. 6 x 9 Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 25 (1) Frequency Response Hz 65 ÷ 24k Woofer Magnet size D x d x h mm (in.) 110 x 45 x 20 (4.33 x 1.77 x 0.79) Tweeter Magnet size D x h mm (in.) 24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 1,69 (3.73) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper Dome Tetolon D mm 169 Xmax mm 5,5 Re Ohm 3 Fs Hz 65 Le mH 0,4 Vas I 11,29 Mms g 36,1 Cms mm/N 0,16 BL T*m 7,665 Qts 0,62 Qes 0,78 Qms 2,9 Spl dB 94 A 237,5 mm 9.35 in. B 225 mm 8.86 in. C 93 mm 3.66 in. D 85 mm 3.35 in. E 163 mm 6.42 in. F 154 mm 6.06 in.
BUY NOW
HERTZ Spl Show 6X9 HERTZ Spl Show 6X9
HERTZ Spl Show 6X9" 3-Way Coaxial Speaker - Pair (Sx... $599.99
SX 690 H NEO coaxial for 2024 Harley is a real beast with a Hi-SPL Mid-Hi unit based on a 1.4” dome tweeter and 1” dome super tweeter with a resettable solid-state protection circuit. The cone is made with nature-proof high-stiffness pressed paper featuring innovative water/humidity resistance and anti-UV treatments. The double-layer copper voice coil wound on polyimide former ensures unparalleled power handling. New motor units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance.  Component SPL COAXIAL Size mm (in.) in. 6 x 9 Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 25 (1) Frequency Response Hz 65 ÷ 24k Woofer Magnet size D x d x h mm (in.) 110 x 45 x 20 (4.33 x 1.77 x 0.79) Tweeter Magnet size D x h mm (in.) 24,5 x 6 x 3,5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 1,69 (3.73) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper Dome Tetolon D mm 169 Xmax mm 5,5 Re Ohm 3 Fs Hz 65 Le mH 0,4 Vas I 11,29 Mms g 36,1 Cms mm/N 0,16 BL T*m 7,665 Qts 0,62 Qes 0,78 Qms 2,9 Spl dB 94 A 237,5 mm 9.35 in. B 225 mm 8.86 in. C 93 mm 3.66 in. D 85 mm 3.35 in. E 163 mm 6.42 in. F 154 mm 6.06 in.
BUY NOW
HERTZ Spl Show 6.5 HERTZ Spl Show 6.5
HERTZ Spl Show 6.5" 2-Way Coaxial Speaker - Pair (Sx... $419.99
Totally new NEO SPL coaxial SX 165 NEO cone is made with nature-proof high stiffness pressed-paper featuring innovative water/humidity resistant and anti-UV treatments. The double layer copper voice coil, wound on polyamide former ensures unparalleled power handling. New motors units are made of special Neodymium N38 H to obtain a minimum bulk and increased performance. SX 165 NEO features a large Hi-SPL 1.4” PEI dome tweeter with resettable solid-state protection circuit and a protective rubber gasket for high SPL and a safe outdoor use. Component SPL COAXIAL Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) PEI Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 100 ÷ 20k Woofer Magnet size D x d x h mm (in.) 70 x 45 x 7 (2.76 x 1.77 x 0.28) Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12) Weight of one speaker kg (lb.) 0,94 (2.08) Woofer Magnet Special Neodymium N38 H Tweeter Magnet Special Neodymium N38 H Cone Water repellent pressed paper D mm 128 Re Ohm 3,3 Fs Hz 110 Le mH 0,061 Vas I 4,92 Mms g 10,14 Cms mm/N 0,21 BL T*m 5,83 Qts 0,64 Qes 0,68 Qms 9,7 Spl dB 96,5 A 167,2 mm 6.58 in. B 143,3 mm 5.64 in. C 69,5 mm 2.74 in. D 57,8 mm 2.28 in.
BUY NOW
HERTZ Spl Show 6.5
HERTZ Spl Show 6.5" Midrange Woofer Component - Pair (Sv... $334.99
The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores. SV 165.1165 (6.5) mm (in.) | Spl Midrange | 400 W | 4 Ohm The SV 165.1 car audio midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165.1 features a solid, robust structure and, like all the other SPL Show components, it employs a copper voice coil wound on a two-layer KSV former, for unheard-of thermal and mechanical capability also in extreme circumstances. The cone features a water repellent pressed paper membrane and paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores. Component SPL Midrange Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 400 Impedance Ohm 4 Voice Coil Ø 38 (1.5) Frequency Response Hz 100 ÷ 10k Magnet size D x d x h mm (in.) 110 x 45 x 20 (4.3 x 1.8 x 0.8) Weight of one speaker kg (lb.) 1,85 (4) Magnet High density flux ferrite Cone Ultra light pressed paper D mm 128 Re Ohm 3,2 Fs Hz 110 Le mH 0,26 Vas I 4,65 Mms g 10,4 Cms mm/N 0,2 BL T*m 6,5 Qts 0,5 Qes 0,55 Qms 5,53 Spl dB 97 A 168 mm 6.6 in. B 145 mm 5.7 in. C 74 mm 2.9 in. D 66 mm 2.6 in.
BUY NOW
HERTZ Spl Show 1.8 HERTZ Spl Show 1.8
HERTZ Spl Show 1.8" (46Mm) High Efficiency Compression Driver -... $524.99
NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only. Component HIGH EFFICIENCY COMPRESSION DRIVER Size mm (in.) 46 (1.8) Power Handling - Peak W 120 Power Handling - Peak Note Hi-pass filtered @ 5 kHz - 12 dB Oct. Impedance Ohm 4 Voice Coil Ø 35 (1.4) Frequency Response Hz 2k ÷ 20k Weight of one component kg (lb.) 0,53 (1.17) Magnet Neodymium Dome Aluminium D mm 46 Re Ohm 3,3 Fs Hz 4000 Le mH 0,02 BL T*m 3,5 Spl dB 109 A 69 mm 2.72 in. B 52 mm 2.05 in. C 65,7 mm 2.59 in. D 33,3 mm 1.31 in.
BUY NOW
HERTZ Mille Pro 6X9 HERTZ Mille Pro 6X9
HERTZ Mille Pro 6X9" 3-Way Coaxial Speaker - Pair (Mpx... $524.99
The three-way MPX 690.3 car audio coaxial, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening. Component Coaxials Size mm (in.) (6 x 9) Power Handling - Continuous W 130 Power Handling - Peak W 260 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 38 (1.5) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 30 ÷ 24k Woofer Magnet size D x d x h mm (in.) 107 x 45 x 20 (4.21 x 1.77 x 0.79) Weight of one speaker kg (lb.) 2.28 (5.03) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±8 (0.31) D mm 169 Re Ohm 3 Fs Hz 50 Le mH 0,07 Vas I 24 Mms g 30 Cms mm/N 0,34 BL T*m 7,2 Qts 0,43 Qes 0,55 Qms 2 Spl dB 94 A 241 mm 9.49 in. B 223 mm 8.74 in. C 108 mm 4.25 in. D 90 mm 3.54 in. E 267 mm 10.53 in. F 38,5 mm 1.52 in.
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" 2-Way Coaxial Speaker - Pair (Mpx... $419.99
The  coax tweeter concentric to the woofer of the MPX 165.3 car audio coaxial speakers  allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies. 1. CONCENTRIC COAXIAL TWEETER: built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances.2. TWEETER SUPPORT WORKING AS A REAR CHAMBER: sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point.3. 36 MM PURE COPPER WOOFER VOICE COIL: wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction.4. PRESSED-PULP CONE WITH COTTON FIBERS: combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area.5. “BOUNDARY FREE” RUBBER SURROUND: for improved efficiency and wider midbass frequency. (Logo Boundary Free)6. OVER-SIZED FERRITE MAGNET: combined with very low carbon content iron plates, for low distortion at high power levels.7. BASKET: low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo.8. ANTI-VIBRATION RUBBER MAGNET COVER: to damp spurious vibrations. Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 36 (1.42) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 21,5k Woofer Magnet size D x d x h mm (in.) 90 x 45 x 17 (3.54 x 1.77 x 0.67) Tweeter Magnet size D x h mm (in.) 29.5 x 22 x 4 (1.16 x 0.87 x 0.16) Weight of one speaker kg (lb.) 1.27 (2.8) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-pulp cone with cotton fibers Dome Tetolon Xmech mm (in.) ±6 (0.24) D mm 132 Re Ohm 3,1 Fs Hz 90 Le mH 0,01 Vas I 4 Mms g 18,9 Cms mm/N 0,15 BL T*m 5,8 Qts 0,88 Qes 1,06 Qms 5,5 Spl dB 92 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74 mm 2.91 in. D 62,6 mm 2.46 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.
BUY NOW
HERTZ Mille Pro 3 HERTZ Mille Pro 3
HERTZ Mille Pro 3" Midrange Speaker - Pair (Mp 70.3... $314.99
The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. Component Mid-range Size mm (in.) 70 (3) Power Handling - Peak W 100 Power Handling - Peak Note (Hi-Pass filtered @250Hz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 20 (0.8) Frequency Response Hz 180 ÷ 18k Magnet size D x d x h mm (in.) 19.7 x 0 x 2 (0.78 x 0 x 0.08) Weight of one speaker kg (lb.) 0.17 (0.37) Magnet Neodymium Cone Pressed-pulp cone with cotton fibers D mm 65 Re Ohm 3,7 Fs Hz 110 Le mH 0,12 Vas I 1 Mms g 2,9 Cms mm/N 0,7 BL T*m 2,8 Qts 0,82 Qes 1 Qms 4,6 Spl dB 88 A 87,8 mm 3,46 in. B 73 mm 2,87 in. C 50 mm 1.97 in. D 44 mm 1.73 in. E 93 mm 3.66 in. F 17 mm 0.67 in.
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165P.3... $479.99
The MP 165P.3 car audio woofers electro-acoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.   Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 3 Voice Coil Ø 25 (1) Frequency Response Hz 45 ÷ 4,5k Magnet size D x d x h mm (in.) 95 x 45 x 17 (3.74 x 1.77 x 0.67) Weight of one speaker kg (lb.) 1.2 (2.65) Magnet High density flux ferrite Cone Pressed-pulp cone with cotton fibers Xmech mm (in.) ±7.5 (0.3) D mm 132 Re Ohm 2,6 Fs Hz 75 Le mH 0,28 Vas I 8 Mms g 15,1 Cms mm/N 0,3 BL T*m 5,45 Qts 0,56 Qes 0,63 Qms 5,2 Spl dB 94 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74,5 mm 2.93 in. D 64 mm 2.52 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" Woofer Component - Pair (Mp 165.3... $314.99
Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 car audio woofers boast outstanding dispersion features and generates high SPL with compact dimensions, ensuring a wide low frequency response, even in cars with no space for a subwoofer. Component Woofer Size mm (in.) 165 (6.5) Power Handling - Continuous W 90 Power Handling - Peak W 180 Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 40 ÷ 5k Magnet size D x d x h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.67) Weight of one speaker kg (lb.) 1.07 (2.36) Magnet High density flux ferrite Cone Pressed-pulp cone with cotton fibers Xmech mm (in.) ±7 (0.28) D mm 132 Re Ohm 3,1 Fs Hz 70 Le mH 0,3 Vas I 9,5 Mms g 14,9 Cms mm/N 0,36 BL T*m 5,5 Qts 0,58 Qes 0,67 Qms 4,6 Spl dB 93 A 165 mm 6.5 in. B 141 mm 5.55 in. C 74 mm 2.91 in. D 63 mm 2.48 in. E 183,5 mm 7.22 in. F 29 mm 1.14 in.
BUY NOW
HERTZ Mille Legend 3
HERTZ Mille Legend 3" 2-Way Component Speaker - Pair (Mlk... $1,469.99
The MLK 700.3 Legend car audio speakers system aims at offering a mid-high frequency range of excellence, to combine with a Legend woofer with a choice between ML 1650.3 and ML 1800.3 actively filtered in a multi-amplified configuration. MLK 700.3 Legend is composed of the ML 700.3 Legend Extended Midrange, the ML 280.3 Legend tweeter and the MLCX 2 TM.3 dedicated crossover that features the unique Mid-Countour control with its three-position selector, acting on the mid frequencies of the ML 700.3 Legend midrange by varying the cross-point with the tweeter to obtain the desired sound.  The V-cone® exponential profile without the traditional dustcap gets close to the perfect one, generating exceptional dispersion: thanks to the synergistic action of these technological elements, ML700.3 Legend boasts outstanding high frequency extension making it possible to build purist two-way systems in combination with ML 1650.3 Legend or ML 1800.3 Legend.  Thanks to this configuration, where there is only one cross-point, phase rotations are limited to the minimum, ensuring excellent soundstage and disarming timbre consistency. With the mid-high frequencies being handled by the ML700.3 Legend and the low ones by the ML1800.3 Legend, the whole audio range is reproduced with transducers built with the same materials and based on the same electro-acoustic structure; that doesn’t happen with woofer and tweeter, since due to its own nature the tweeter is different in materials and structure. The uniformity in materials and structures creates very high timbre consistency, so the speakers can “disappear” and leave room to emotions. Component System Size mm (in.) 70 (3) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 20 (0.8) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL Midrange 90 Tweeter 92 Frequency Response Hz 200 ÷ 28k Crossover Cut off 4.5 kHz - 6/12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0,210 (0.46) Weight of one component - Tweeter kg (lb) 0,1 (0.22) Weight of one component - Crossover kg (lb) 0,57 (1.26) D mm 65 Re Ohm 3,8 Fs Hz 110 Le mH 0,05 Vas I 1,1 Mms g 2,7 Cms mm/N 0,7 BL T*m 3,3 Qts 0,57 Qes 0,67 Qms 4 Spl dB 90
BUY NOW
HERTZ Mille Legend 3 HERTZ Mille Legend 3
HERTZ Mille Legend 3" Midrange Speaker - Pair (Ml 700.3... $629.99
The ML 700.3 Legend car audio midrange features the V-cone geometry upgrade, the Neodymium magnet assembly and the threespoke anti-resonant aluminium alloy basket with vented holes.Thanks to these technologies, as well as the Boundary Free Surround, taking the diameter emission from 60 to 65 mm, the midrange will provide extended, properly damped low frequency response, as the component will be filtered especially at the low frequencies, for excellent combination with the ML 1800.3 Legend, to build an ultra-performing system for competitions. 1. Neodymium magnet optimized with FEA simulations, for superior dynamics and control.2. Very low carbon content CNC machined plates, for maximum magnetic permeability and low distortion at high power levels.3. Extremely pure copper covered central pole and one-layer mobile coil, for a wider extension in the high frequency range.4. Exponential V-cone® with optimized geometry for utmost linearity and dispersion.5. CONEX spider with optimized profile, for maximum transparent acoustics at mid-high frequency.6. “Boundary Free” IIR rubber surround, for better efficiency and wider mid-bass frequency.7. Pressed-pulp cone with cotton fibres, combining stiffness and lightweight, to achieve wide frequency response and limited break-ups at high frequency.8. Junction point between cone and former with geometry optimized with FEA methods, allowing a more integral coupling, thus ensuring wider extension at high frequency.9. Three-spoke, very acoustically transparent anti-resonant aluminium alloy basket featuring built-in venting holes.10. CNC machined elegant diamond-cut basket edge featuring the Hertz logo.11. Die-cast aluminium factory provided grille featuring diamond-cut aluminium Hertz logo. Component Mid-range Size mm (in.) 70 (3) Power Handling - Peak W 100 Power Handling - Peak Note (Hi-Pass filtered @ 250Hz - 12dB Oct.) Impedance Ohm 4 Voice Coil Ø 20 (0.8) Frequency Response Hz 200 - 20k Magnet size D x d x h mm (in.) 45 x 25 x 3,5 (1.77 x 0.98 x 0.13) Weight of one speaker kg (lb.) 0,21 (0.46) Magnet Neodymium Cone Pressed-pulp cone with cotton fibres D mm 65 Re Ohm 3,8 Fs Hz 110 Le mH 0,05 Vas I 1,1 Mms g 2,7 Cms mm/N 0,7 BL T*m 3,3 Qts 0,57 Qes 0,67 Qms 4 Spl dB 90 A 87,8 mm 3.45 in B 74 mm 2.91 in C 47 mm 1.85 in D 41,3 mm 1.62 in E 93 mm 3.66 in. F 17 mm 0.67 in.
BUY NOW
HERTZ Dieci 6 HERTZ Dieci 6
HERTZ Dieci 6" 2-Way Component Speaker - Pair (Dsk 160.3) $239.99
Product info: component speaker system includes 2 woofers, 2 tweeters, and 2 external crossovers 6" treated paper woofer with polyurethane surround separate PEI dome tweeter with external crossover includes tweeter mounts, plus adapter rings for select GM and Honda vehicles handles up to 80 watts RMS (180 watts peak power) frequency range: 50-23,000 Hz sensitivity: 94 dB (1 watt at 1 meter) woofer mounting depth: 2-1/4" impedance: 4 ohms grilles not included warranty: 2 years MFR # DSK 160.3 Item # 301DSK1603 Size Classification Note: Hertz describes these woofers as 6", but they fit many standard 6½" and 6¾" applications. The included adapter brackets are used to fit several specialized factory speaker applications. The brackets are also useful as a spacer in shallow locations; the brackets add just over ¼" to the woofers' mounting height and subtract just over ¼" from the mounting depth. Please enter your vehicle information to confirm fit. Tweeter Mounting: Brackets are included for flush mounting and angled surface mounting (60° or 30°) the tweeters. Tweeter Mounting Dimensions:   Flush Mount 60° Angled Surface Mount 30° Angled Surface Mount Mounting Height 0.366" 1.232" 1.515" Depth 0.426" N/A N/A Frame Diameter 1.605" N/A N/A Cutout Diameter 1.420" N/A N/A Frame Width N/A 1.463" 1.463" Frame Depth N/A 1.535" 1.255"   Crossovers: The included 48" tweeter wires have high pass crossovers wired in-line. The input end of each wire is terminated with female quick slides that attach to the woofer terminals, and the output end has terminals that mate to the terminals on the wire attached to the tweeters. The crossover point is 3.5 kHz and the slope is 6 dB/octave. Each crossover is approximately 1" long and ⅜" at its widest point. The woofer is not crossed over. General Speaker Size 6 Driver Design 2-way Woofer Design Cone Woofer Material Pressed Paper (Water-Repellent) Woofer Surround Polyurethane Midrange Design --- Midrange Material --- Tweeter Design 24mm Dome Tweeter Material PEI Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included No Parts Warranty 2 Years Labor Warranty 2 Years Specifications Sensitivity (1W at 1 meter) 94 Sensitivity at 2.83 volts N/A Frequency Response 50 - 23k Hz Maximum RMS Wattage 80 Peak Power Handling (Watts) 180 Top-mount Depth (Inches) 2 1/4 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 1/16 Mounting Height (Inches) 0.384 Frame Width 6.256 Frame Length 6.256
BUY NOW
HERTZ Dieci 3.5 HERTZ Dieci 3.5
HERTZ Dieci 3.5" 2-Way Coaxial Speaker - Pair (Dcx 87.3) $134.99
Hertz DCX 87.3 coaxial speaker combines a woofer made of the highest performance materials with a neodymium tweeter featuring the exclusive PEI dome. Despite its compact size, the DCX 87.3 features an oversized magnetic group for ultimate control, still maintaining a compact size. For those who look for a high-performance two-way coax, the DCX 87.3 is able to ensure wide frequency response and excellent sound in any installation. Component Two way coaxial Size mm (in.) 87 (3.4) Power Handling - Continuous W 30 Power Handling - Peak W 60 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 130 ÷ 21k Woofer Magnet size D x d x h mm (in.) 60 x 24 x 8 (2.4 x 0.9 x 0.3) Weight of one speaker kg (lb.) 0,31 (0.68) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Water-repellent pressed paper Dome PEI D mm 70 Re Ohm 3,1 Fs Hz 190 Vas I 0,7 Mms g 2,0 Cms mm/N 0,35 BL T*m 2,5 Qts 1 Qes 1,25 Qms 5,66 Spl dB 92 A 87 mm (3.4 in. A3 120 mm (4.7 in.) B 81 mm (3.2 in.) C 45 mm (1.8 in.) D 34 mm (1.3 in.)
BUY NOW
HERTZ Dieci 6X9 HERTZ Dieci 6X9
HERTZ Dieci 6X9" 3-Way Coaxial Speaker - Pair (Dcx 690.3) $174.99
Hertz DCX 690.3 Dieci series car audio coaxials use an oversized magnetic group, TPU (Thermoplastic polyurethane) surround, a 60 mm diameter midrange, and a PEI dome tweeter. The result is linearity, wide dispersion, and extra-ordinary efficiency not found in traditional coax components. An involving, emotional sound, even at high SPL levels. An authentic 3-way coax capable of reproducing a wide frequency spectrum. Component Three way coaxial Size mm (in.) (6 x 9) Power Handling - Continuous W 90 Power Handling - Peak W 180 Impedance Ohm 4 Depth mm (in.) 98 (3.9) Woofer Voice Coil Ø mm (in.) 25 (1.0) Frequency Response Hz 45 ÷ 21k Woofer Magnet size D x d x h mm (in.) 80 x 40 x 15 (3.1 x 1.6 x 0.6) Weight of one speaker kg (lb.) 0,95 (2.09) Woofer Magnet High density flux ferrite Tweeter Magnet High density flux ferrite D mm 170 Re Ohm 3,4 Fs Hz 66 Vas I 25,7 Mms g 16,5 Cms mm/N 0,35 BL T*m 3,9 Qts 1,12 Qes 1,55 Qms 4,06 Spl dB 93 A1 237 mm (9.3 in.) A2 162 mm (6.4 in.) B1 224 mm (8.8 in.) B2 153 mm (6.0 in.) C 98 mm (3.9 in.) D 77 mm (3.0 in.)
BUY NOW
HERTZ Dieci 5X7 HERTZ Dieci 5X7
HERTZ Dieci 5X7" 2-Way Coaxial Speaker - Pair (Dcx 570.3) $174.99
Hertz DCX 570.3 car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level. This 2-way coax speaker is designed to satisfy specific installation and listening needs.   Component Two way coaxial Size mm (in.) (5 x 7) Power Handling - Continuous W 60 Power Handling - Peak W 120 Impedance Ohm 4 Depth mm (in.) 66 (2.6) Woofer Voice Coil Ø mm (in.) 25 (1.0) Frequency Response Hz 60 ÷ 21k Woofer Magnet size D x d x h mm (in.) 80 x 40 x 15 (3.1 x 1.6 x 0.6) Weight of one speaker kg (lb.) 0,76 (1.67) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Water-repellent pressed paper Dome PEI D mm 136 Re Ohm 3,3 Fs Hz 81 Vas I 10,7 Mms g 10,8 Cms mm/N 0,36 BL T*m 4,3 Qts 0,82 Qes 1,00 Qms 4,56 Spl dB 93 A1 220 mm (8.7 in.) A2 141 mm (5.6 in.) B1 182 mm (7.2 in.) B2 127 mm (5 in.) C 66 mm (2.6 in.) D 59 mm (2.3 in.)
BUY NOW
HERTZ Dieci 4X6 HERTZ Dieci 4X6
HERTZ Dieci 4X6" 2-Way Coaxial Speaker - Pair (Dcx 460.3) $164.99
Hertz DCX 460.3car audio coaxial features a neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a copper mobile voice coil wound on conex former. This 2-way coax speaker is designed to satisfy specific installation and listening needs. An extremely light, yet stiff structure ensures linear frequency response and a high sensitivity level. Component Two way coaxial Size mm (in.) (4 x 6) Power Handling - Continuous W 40 Power Handling - Peak W 80 Impedance Ohm 4 Depth mm (in.) 53 (2.1) Woofer Voice Coil Ø mm (in.) 25 (1.0) Frequency Response Hz 65 ÷ 21k Woofer Magnet size D x d x h mm (in.) 80 x 32 x 10 (3.1 x 1.3 x 0.4) Weight of one speaker kg (lb.) 0,58 (1.28) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Water-repellent pressed paper Dome PEI D mm 103 Re Ohm 3,3 Fs Hz 90 Vas I 6,2 Mms g 6 Cms mm/N 0,41 BL T*m 3,8 Qts 0,79 Qes 0,92 Qms 5,20 Spl dB 93 A1 155 mm (6.1 in.) A2 97 mm (3.8 in.) B1 146 mm (5.7 in.) B2 89 mm (3.5 in.) C 53 mm (2.1 in.) D 45 mm (1.8 in.)
BUY NOW
HERTZ 6.5 HERTZ 6.5
HERTZ 6.5"2 Way Coaxial Speaker 120W - DCX165.3 $142.99
Product info: 2-way car speakers (pair) 6-1/2" treated paper woofer with polyurethane surround 5/8" PEI dome tweeter handles up to 60 watts RMS (120 watts peak power) frequency range: 60-21,000 Hz sensitivity: 93 dB top-mount depth: 2-1/2" grilles not included warranty: 2 years MFR # DCX 165.3 Item # 301DCX1653 Includes Two 2-way Speakers Eight 3/4" Screws 8 Speed clips Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 20 Others) Template on box General Speaker Size 6 1/2 Driver Design 2-way Woofer Design Cone Woofer Material Treated Paper (Water-Repellent) Woofer Surround Polyurethane Midrange Design --- Midrange Material --- Tweeter Design 15mm Dome Tweeter Material PEI Super Tweeter Design --- Super Tweeter Material --- Impedance (Ohms) 4 Weather-resistant No Grilles Included No Parts Warranty 2 Years Labor Warranty 2 Years Specifications Sensitivity (1W at 1 meter) 93 Sensitivity at 2.83 volts N/A Frequency Response 60 - 21k Hz Maximum RMS Wattage 60 Peak Power Handling (Watts) 120 Top-mount Depth (Inches) 2 9/16 Bottom-mount Depth (Inches) N/A Cutout Diameter or Length (inches) 5 9/16 Mounting Height (Inches) 0.242 Frame Width 6.48 Frame Length 6.48
BUY NOW
HERTZ Dieci 5 HERTZ Dieci 5
HERTZ Dieci 5" 2-Way Coaxial Speaker - Pair (Dcx 130.3) $134.99
To meet all installation needs, without giving up on Hertz quality and performance, The Dieci DCX 130.3 car audio coaxials were designed with maniacal care to provide a linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact. Component Two way coaxial Size mm (in.) 130 (5) Power Handling - Continuous W 40 Power Handling - Peak W 80 Impedance Ohm 4 Frequency Response Hz 65 ÷ 21k Woofer Magnet size D x d x h mm (in.) 70 x 32 x 15 (2.7 x 1.3 x 0.6) Weight of one speaker kg (lb.) 0,56 (1.23) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Water-repellent pressed paper Dome PEI D mm 112 Re Ohm 3,3 Fs Hz 82 Vas I 7 Mms g 7,4 Cms mm/N 0,51 BL T*m 3,8 Qts 0,76 Qes 0,93 Qms 4,3 Spl dB 93 A 130 mm (5.0 in.) A3 151 mm (5.9 in.) B 116 mm (4.6 in.) C 59 mm (2.3 in.) D 52 mm (2.0 in.)
BUY NOW
HERTZ Dieci 4 HERTZ Dieci 4
HERTZ Dieci 4" 2-Way Coaxial Speaker - Pair (Dcx 100.3) $134.99
To meet all installation needs, without giving up on Hertz quality and performance, Hertz DCX 100.3 car audio coaxial is designed with maniacal care to provide linear frequency response and ensure high reliability. A Neodymium magnet, PEI dome tweeter, built-in crossover, TPU (Thermoplastic polyurethane) surround and a pressed-paper cone provide the optimum ratio between installation friendliness and sound with dynamic and emotional impact. Component Two way coaxial Size mm (in.) 100 (4) Power Handling - Continuous W 30 Power Handling - Peak W 60 Impedance Ohm 4 Frequency Response Hz 70 ÷ 21k Woofer Magnet size D x d x h mm (in.) 70 x 32 x 10 (2.7 x 1.3 x 0.4) Weight of one speaker kg (lb.) 0,45 (0.99) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Water-repellent pressed paper Dome PEI D mm 85 Re Ohm 3,3 Fs Hz 115 Vas I 1,7 Mms g 5,0 Cms mm/N 0,38 BL T*m 3,5 Qts 0,79 Qes 0,96 Qms 4,33 Spl dB 92 A 99 mm (3.9 in.) A3 129 mm (5.1 in.) B 94 mm (3.7 in.) C 50 mm (2.0 in.) D 43 mm (1.7 in.)
BUY NOW
HERTZ Cento 6X9 HERTZ Cento 6X9
HERTZ Cento 6X9" 3-Way Coaxial System 300W With Grilles -... $314.99
The HERTZ CX690 is a high-performance 6×9-inch 2-way coaxial speaker engineered to deliver powerful, well-balanced sound even in challenging horizontal installations. Designed for car audio enthusiasts, it combines robust power handling, excellent sensitivity, and refined tonal accuracy for a premium in-car listening experience. Featuring a semi-pressed paper-mica (SPP-M) elliptical cone, the CX690 achieves the ideal balance between lightness and damping, resulting in tight mid-bass and controlled response. A wide rubber suspension allows long excursion while minimizing distortion at high volumes. High frequencies are handled with precision by a 40 mm Tetolon dome tweeter, supported by a neodymium magnet, ensuring smooth, distortion-free mid and high-range reproduction. The speaker’s high-density ferrite magnet and low-carbon polar plates reduce distortion under high power, while the rigid basket with metallic finish and rubber magnet cover suppresses unwanted vibrations. Perfect for factory upgrades or custom car audio builds, the HERTZ CX690 delivers clarity, punch, and durability in a compact coaxial design.   Key Features 6×9" 2-Way Coaxial car speaker system SPP-M (Semi-Pressed Paper-Mica) cone for balanced sound and durability 40 mm Tetolon dome tweeter for clear, detailed highs Neodymium tweeter magnet for high efficiency Wide rubber surround for extended excursion and damping High-density ferrite magnet for reduced distortion at high power Rigid basket with rubber magnet cover to minimize vibrations Optimized for in-car audio systems Technical Specifications Specification Details Brand HERTZ Model Name CX690 Series 690 Speaker Type 2-Way Coaxial Woofer Size 6 × 9 in (230 × 150 mm) Tweeter Size 40 mm (1.58 in) Supertweeter Size 20 mm (0.8 in) Cone Material Semi-Pressed Paper-Mica (SPP-M) Tweeter Dome Tetolon Tweeter Magnet Neodymium Impedance 4 Ω Sensitivity 93.5 dB SPL Frequency Response 40 Hz – 23 kHz Power Handling (Continuous) 100 W Power Handling (Peak) 300 W Woofer Voice Coil 30 mm (1.2 in) Tweeter Voice Coil 28 mm (1.1 in) Connectivity Coaxial (Wired) Recommended Use In-Car Audio Systems Color Black Speaker Size 9 Inches Weight 6.8 lbs (3.42 lbs per unit approx.) Included Components CX690 Speakers Manufacturer Hertz GTIN 08018823126687 ASIN B07JWDZYY1
BUY NOW
HERTZ Cento 5X7 HERTZ Cento 5X7
HERTZ Cento 5X7" 2-Way Coaxial Speaker - Pair (Cx 570) $259.99
Coaxial loudspeakers represent a major design challenge due to the critical nature of their acoustic output, being installed in an OEM placement often unfavorable to reproduction. For this reason, in order to achieve high performance, a great engineering effort was put into place, promptly addressed by our R&D team. The Cento two-way coaxials CX 570 features the new 24 mm (0.9 in.) Tetolon® dome tweeter that delivers a more musical and detailed sound compared to the more traditional plastic materials. The dispersion has been optimized for off-axis listening. The  SPP-M cone (Semi Pressed Paper-Mica) ensuring superior acoustic and damping characteristics.  Component Coaxials Size mm (in.) (5 x 7) Power Handling - Continuous W 70 Power Handling - Peak W 210 Impedance Ohm 4 Frequency Response Hz 55 ÷ 22k Woofer Magnet size D x d x h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.59) Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08) Weight of one speaker kg (lb.) 1,0 (2.2) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Semi-pressed paper + Mica Dome Tetolon Xmech mm (in.) 4,9 (0.19) D mm 139 Re Ohm 3,3 Fs Hz 70 Le mH 0,2 Vas I 11,1 Mms g 13 Cms mm/N 0,34 BL T*m 4,9 Qts 0,67 Qes 0,83 Qms 3,3 Spl dB 93,5 A 221 mm 8.7 in. B 182 mm 7.17 in. C 75 mm 2.95 in. D 65,5 mm 2.58 in.
BUY NOW
HERTZ Cento 6.5 HERTZ Cento 6.5
HERTZ Cento 6.5" 2-Way Coaxial Speaker - Pair (Cx 165) $239.99
Coaxial loudspeakers represent a major design challenge due to the critical nature of their acoustic output, being installed in an OEM placement often unfavorable to reproduction. For this reason, in order to achieve high performance, a great engineering effort was put into place, promptly addressed by our R&D team. The Cento two-way coaxials CX 165 features the new 24 mm (0.9 in.) Tetolon® dome tweeter that delivers a more musical and detailed sound compared to the more traditional plastic materials. The dispersion has been optimized for off-axis listening. The  SPP-M cone (Semi Pressed Paper-Mica) ensuring superior acoustic and damping characteristics.  Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 70 Power Handling - Peak W 210 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 13 (0.5) Frequency Response Hz 55 ÷ 22k Woofer Magnet size D x d x h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.59) Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08) Weight of one speaker kg (lb.) 0,95 (2.09) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Semi-pressed paper+ Mica Dome Tetolon Xmech mm (in.) 4,9 (0.19) D mm 131,5 Re Ohm 3,2 Fs Hz 65 Le mH 0,21 Vas I 12,2 Mms g 13,3 Cms mm/N 0,46 BL T*m 4,8 Qts 0,60 Qes 0,73 Qms 3,4 Spl dB 93 A 165 mm 6.5 in. B 142 mm 5.59 in. C 71 mm 2.8 in. D 62,5 mm 2.46 in. E 171 mm 6.73 in. F 24 mm 0.94 in.
BUY NOW
HERTZ Cento 5 HERTZ Cento 5
HERTZ Cento 5" 2-Way Coaxial Speaker - Pair (Cx 130) $219.99
Coaxial loudspeakers represent a major design challenge due to the critical nature of their acoustic output, being installed in an OEM placement often unfavorable to reproduction. For this reason, in order to achieve high performance, a great engineering effort was put into place, promptly addressed by our R&D team. The Cento two-way coaxials CX 130 features the new 24 mm (0.9 in.) Tetolon® dome tweeter that delivers a more musical and detailed sound compared to the more traditional plastic materials. The dispersion has been optimized for off-axis listening. The  SPP-M cone (Semi Pressed Paper-Mica) ensuring superior acoustic and damping characteristics.  Component Coaxials Size mm (in.) 130 (5) Power Handling - Continuous W 50 Power Handling - Peak W 150 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 13 (0.5) Frequency Response Hz 65 ÷ 22k Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08) Weight of one speaker kg (lb.) 0,73 (1.61) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Semi-pressed paper + Mica Dome Tetolon Xmech mm (in.) 3,8 (0.15) D mm 110 Re Ohm 3,1 Fs Hz 80 Le mH 0,18 Vas I 13,5 Mms g 7,6 Cms mm/N 0,50 BL T*m 4,2 Qts 0,56 Qes 0,67 Qms 3,5 Spl dB 92,5 A 130 mm 5.12 in. B 119 mm 4.69 in. C 65,5 mm 1.95 in. D 49,5 mm 1.95 in. E 156 mm 6.14 in. F 21 mm 0.83 in.
BUY NOW
HERTZ Cento 4 HERTZ Cento 4
HERTZ Cento 4" 2-Way Coaxial Speaker - Pair (Cx 100) $219.99
Coaxial loudspeakers represent a major design challenge due to the critical nature of their acoustic output, being installed in an OEM placement often unfavorable to reproduction. For this reason, in order to achieve high performance, a great engineering effort was put into place, promptly addressed by our R&D team. The Cento two-way coaxials CX 100 features the new 24 mm (0.9 in.) Tetolon® dome tweeter that delivers a more musical and detailed sound compared to the more traditional plastic materials. The dispersion has been optimized for off-axis listening. The  SPP-M cone (Semi Pressed Paper-Mica) ensuring superior acoustic and damping characteristics.  Component Coaxials Size mm (in.) 100 (4) Power Handling - Continuous W 40 Power Handling - Peak W 120 Impedance Ohm 4 Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 13 (0.5) Frequency Response Hz 80 ÷ 22k Woofer Magnet size D x d x h mm (in.) 70 x 32 x 10 (2.76 x 1.26 x 0.39) Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08) Weight of one speaker kg (lb.) 0,47 (1.04) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Semi-pressed paper + Mica Dome Tetolon Xmech mm (in.) 2,9 (0.11) D mm 86,5 Re Ohm 3,1 Fs Hz 100 Le mH 0,18 Vas I 2 Mms g 5,1 Cms mm/N 0,41 BL T*m 3,3 Qts 0,81 Qes 1,00 Qms 4,1 Spl dB 92 Electro-acoustic Specs A 102,5 mm 4.04 in. B 93 mm 3.66 in. C 57,5 mm 2.26 in. D 43,5 mm 1.71 in.
BUY NOW
HERTZ Cento Pro 6X9 HERTZ Cento Pro 6X9
HERTZ Cento Pro 6X9" 3-Way Coaxial Speaker - Pair (Cpx... $479.99
The three-way car audio coaxial CPX 690 is the best solution for enthusiasts who love highly dynamic listening with low engaging frequencies and want to make the most of the rear deck mount. Tweeter and Supertweeter both feature Neodymium magnet and Tetolon dome, 32 mm and 24 mm respectively. The stylish faceplate is designed to maximize off-axis emissions and thus optimizing horizontal installation. As for the CPX 165, the CPX 690's Tweeter and Supertweeter boasts Radial Venting System technology for outstanding cooling and acoustic performance. The robust basket with radial ventilation keeps operating temperatures low. The supplied grille is made of a high resistance ABS plastic support and metallic mesh to ensure a high level of protection with a Hi-tech design Component Coaxials Size mm (in.) (6 x 9) Power Handling - Continuous W 120 Power Handling - Peak W 360 Impedance Ohm 4 Tweeter diaphragm mm (in.) 32 (1.26) Woofer Voice Coil Ø mm (in.) 30 (1.2) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Frequency Response Hz 35 ÷ 24k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 27,8 x 3 (1.09 x 0.12) Weight of one speaker kg (lb.) 1,63 (3.59) Woofer Magnet Ferrite Tweeter Magnet Neodymium Cone Water repellent pressed paper Dome Tetolon Xmech mm (in.) 7,5 (0.3) D mm 172 Re Ohm 3,4 Fs Hz 68 Le mH 0,53 Vas I 15,8 Mms g 26,5 Cms mm/N 0,21 BL T*m 6,0 Qts 0,77 Qes 1,10 Qms 2,7 Spl dB 94 A 237,5 mm 9.35 in. B 225 mm 8.86 in. C 103 mm 4.06 in. D 85 mm 3.35 in. E 269 mm 10.55 in. F 28,5 mm 1.12 in.
BUY NOW
HERTZ Cento Pro 6.5 HERTZ Cento Pro 6.5
HERTZ Cento Pro 6.5" 2-Way Coaxial Speaker - Pair (Cpx... $354.99
The CPX 165 car audiocoaxial provides the thrill of listening to the Hertz sound even when the vehicle does not allow the installation of a two-way kit. The Tetolon dome tweeter and Neodymium magnet is provided with off-axis dispersion features and exceptional frequency extension for a detailed, airy sound. Radial Venting System technology ensures unparalleled cooling of the coil thanks to the eight holes at the base of the engine that allow air exchange with the tweeter support. This acts as a rear camera, sized for low Fs, to ensure a natural mid range and allow a low frequency crossover point with the woofer. The pressed-paper cone and the butyl rubber suspension offer an extended low frequency response and an impressive punch. The Mille-inspired design basket features a dampened and protective rubber coated magnet. The grille, available as optional, is made up of a durable high resistance ABS frame and metallic mesh protection. Component Coaxials Size mm (in.) 165 (6.5) Power Handling - Continuous W 95 Power Handling - Peak W 285 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 22k Woofer Magnet size D x d x h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.67) Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12) Weight of one speaker kg (lb.) 1.13 (2.49) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Pressed-paper cone Dome Tetolon Xmech mm (in.) ±6,9 (0.27) D mm 131,5 Re Ohm 3,3 Fs Hz 60 Le mH 0,29 Vas I 11,8 Mms g 14,6 Cms mm/N 0,47 BL T*m 5,3 Qts 0,55 Qes 0,64 Qms 4,1 Spl dB 92 A 165 mm 6.5 in. B 141 mm 5.55 in. C 84,5 mm 3.33 in. D 65,5 mm 2.58 in. E 171 mm 6.73 in. F 24 mm 0.94 in.
BUY NOW
HERTZ Cento Pro 6X9
HERTZ Cento Pro 6X9" 2-Way Component Speaker - Pair (Cpk... $479.99
The latest addition to the Cento PRO line is the CPK 690 system equipped with an elliptical woofer to avail of the 6 x 9 door placements, which are particularly common in the North American market, such as for the models of Toyota and FORD groups.Like the other speakers of the Cento PRO line, the woofer cone is made of pressed paper, the most suitable material to obtain a linear and controlled emission even when the woofer is driven with very high power.All electroacoustic parameters have been optimized to obtain maximum performance with door installations; we therefore find a magnetic group and voice coil improved for an excellent power handling and a lower resonance frequency.The large emission area of the CP 690 increases the woofer efficiency and extends the response down to 35 Hz. The crossover made with selected components, features a low-pass filter on the woofer with a 6 dB/oct. slope and12 dB/oct. on the tweeter with three levels of attenuation.CPK 690 is dedicated to the young enthusiast who wants a front row seat at their favourite concert while sitting comfortably behind the steering wheel. Component System Size mm (in.) (6 x 9) Power Handling - Continuous W 120 Power Handling - Peak W 360 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 30,5 (1.2) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92 Frequency Response Hz 35 ÷ 22,5k Crossover Cut off LP 6 dB / Oct. - HP 12 dB / Oct. Crossover Type 2 Way Weight of one component - Woofer 1,69 (3.73) Weight of one component - Tweeter kg (lb) 0,07 (0.15) Weight of one component - Crossover kg (lb) 0,2 (0.44) D mm 172 Re Ohm 3,2 Fs Hz 58 Le mH 0,33 Vas I 22,80 Mms g 25,3 Cms mm/N 0,30 BL T*m 6,9 Qts 0,48 Qes 0,62 Qms 2,2 Spl dB 92,5
BUY NOW
HERTZ Cento 5
HERTZ Cento 5" 2-Way Component System - Pair (Ck 130) $354.99
Two-way systems Cento CK 130 features the new C 26 tweeter featuring a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity. Much time was invested in the research of the perfect material for the C 130 woofer cones: through a long process of customization of the materials SPP-M was selected (Semi Pressed Paper-Mica), which preserves the natural sound of the semi-pressed paper and enhances it with Mica powder improving rigidity. The result is an excellent balance between lightness and damping, essential for a powerful and controlled emission. The oversized ferrite magnet provides excellent control even at higher excursions. The ultra compact CCX 2 crossover featuring tweeter emission level control (0, +3 dB) uses selected components for a full and engaging sound. The CG 100 grilles included in the Cento systems brighten up the car interior with their sophisticated design. Made of high resistance ABS with metal mesh, they offer a high degree of protection within a compact size, ideal for in-car installation.   Component System Size mm (in.) 130 (5) Power Handling - Continuous W 70 Power Handling - Peak W 210 Impedance Ohm 4 Tweeter diaphragm mm (in.) 26 (1) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Sensitivity dB SPL 92,5 Frequency Response Hz 65 ÷ 22,5k Crossover Cut off 2,5 kHz @ 12 dB Oct. Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0,7 (1.54) Weight of one component - Tweeter kg (lb) 0,03 (0.07) Weight of one component - Crossover kg (lb) 0,185 (0.41) D mm 110 Re Ohm 3,1 Fs Hz 80 Le mH 0,17 Vas I 6,30 Mms g 8 Cms mm/N 0,50 BL T*m 4,1 Qts 0,61 Qes 0,72 Qms 3,9 Spl dB 92,5
BUY NOW
HERTZ Cento 26Mm (1 HERTZ Cento 26Mm (1
HERTZ Cento 26Mm (1") Tweeter - Pair (C26) $134.99
C 26 tweeter features a 26 mm (1 in.) Tetolon® dome and 20 mm (0.8 in.) voice coil for a detailed and natural reproduction of medium-high frequencies. The R&D team worked extensively to optimize the C 26 dispersion characteristics to maximize performance on the listening point, with a natural and progressive roll-off and a natural timbre that favors frequency linearity.   Component Tweeter Size mm (in.) 26 (1) Power Handling - Peak W 120 Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 20(0.8) Frequency Response Hz 1.8k ÷ 22.5k Magnet size D x d x h mm (in.) 19 x 0 x 3 (0.75 x 0 x 0.12) Weight of one speaker kg (lb.) 0,04 (0.08) Magnet Neodymium Dome Tetolon D mm 26 Re Ohm 3,7 Fs Hz 1500 Le mH 0,02 Vas I - Mms g 0,17 Cms mm/N 0,07 BL T*m 1,3 Qts 1,6 Qes 3,5 Qms 2,9 Spl dB 92 A 44 mm 1.73 in. B 38,5 mm 1.52 in. C 20 mm 0.79 in. D 9,1 mm 0,36 in.
BUY NOW
HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk... $754.99
The MPK 165P.3 car audio speakers system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.   Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 115 Power Handling - Peak W 230 Impedance Ohm 3 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 93 Frequency Response Hz 45 ÷ 22,5k Crossover Cut off 4 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.20 (2.65) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.17 (0.37) D mm 132 Re Ohm 2,6 Fs Hz 75 Le mH 0,28 Vas I 8 Mms g 15,1 Cms mm/N 0,3 BL T*m 5,45 Qts 0,56 Qes 0,63 Qms 5,2 Spl dB 94
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk... $839.99
The MPK 1650.3 car audio speakers system is the top of the range two way system of the Mille PRO line. The system uses the 28 mm diameter MP 28.3 tweeter inheriting all the technological features of the Mille Legend ML28.3. The geometry of the Tetolon dome maximizes the typical dispersion of off-axis listening. The rear acoustic chamber with damping material contributes to extend response to lower frequencies achieving a resonance frequency of only 900 Hz. In this way the crossover point between tweeter and woofer can be lowered, improving the sound image in the car dashboard. The massive Neodymium motor minimizes nonlinearity managing the music program with very dynamic transients. The CCAW (Copper Clad Aluminium Wire) voice coil guarantees an especially light weight and stiff moving assembly. These technological elements interact with each other, resulting in a high frequency extension of 28 kHz, a record for a tweeter featuring a 28 mm voice coil. An elegant and compact angled tweeter support is provided with the system: this allows easy installation both on the A-pillars and on the car dashboard. The correct angle of the tweeter improves the stereo image, essential for an engaging listening.The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations. The crossover MPCX 165.3 creates the optimal tone balance between the MP 28.3 tweeter and MP 165P.3 woofer. It features bi-metallic capacitors with polyester dielectric, for maximum acoustic transparency and air wound inductors built on pure copper wire with up to 1mm diameter eliminating saturation. It also mounts wire-wound type resistors with low parasite inductance. The two positions Hi-Contour control provides the ability to fine tune the system frequency response optimizing it according to the different speakers positions. Most of all, the listeners can achieve their favourite sound thanks to the three-position control for the tweeter emission level with 2 dB steps (+2/0/-2dB) attenuation. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 125 Power Handling - Peak W 250 Impedance Ohm 3 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 93 Frequency Response Hz 45 ÷ 25k Crossover Cut off 3 kHz (Hi-Cont. = ON) , 4 kHz (Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Adjustment Tweeter-Level +2 / 0 / -2 dBHi-Contour ON/OFF Weight of one component - Woofer 1.20 (2.65) Weight of one component - Tweeter kg (lb) 0,075 (0.16) Weight of one component - Crossover kg (lb) 0,37 (0.82)
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" 2-Way Component Speaker - Pair (Mpk... $629.99
The MPK 165.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 165.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 110 Power Handling - Peak W 220 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.07 (2.36) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 132 Re Ohm 3,1 Fs Hz 70 Le mH 0,3 Vas I 9,5 Mms g 14,9 Cms mm/N 0,36 BL T*m 5,5 Qts 0,58 Qes 0,67 Qms 4,6 Spl dB 93
BUY NOW
HERTZ Mille Pro 6.5 HERTZ Mille Pro 6.5
HERTZ Mille Pro 6.5" 3-Way Component Speaker - Pair (Mpk... $994.99
The three way MPK 163.3 car audio speakers system is dedicated to those who want the best: the MP 70.3 midrange featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.
BUY NOW
HERTZ Mille Pro 5 HERTZ Mille Pro 5
HERTZ Mille Pro 5" 2-Way Component Speaker - Pair (Mpk... $629.99
The MPK 130.3 car audio speakers system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 130.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions. The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the  MP 130.3 woofers , ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.. Component System Size mm (in.) 130 (5) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Tweeter diaphragm mm (in.) 29 (1.14) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 25 (1) Sensitivity dB SPL 91 Frequency Response Hz 60 ÷ 22,5k Crossover Cut off 3,5 kHz Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 0.95 (2.09) Weight of one component - Tweeter kg (lb) 0.07 (0.15) Weight of one component - Crossover kg (lb) 0.16 (0.35) D mm 110 Re Ohm 3,1 Fs Hz 90 Le mH 0,25 Vas I 3 Mms g 10,5 Cms mm/N 0,24 BL T*m 5,3 Qts 0,64 Qes 0,74 Qms 5,1 Spl dB 92
BUY NOW
HERTZ Mille Pro Crossover Set - Pair (Mpcx 2 Tm.3 Pro) HERTZ Mille Pro Crossover Set - Pair (Mpcx 2 Tm.3 Pro)
HERTZ Mille Pro Crossover Set - Pair (Mpcx 2 Tm.3... $314.99
The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven. Component Crossover Adjustment Tweeter   0 / +2 dB Weight of one component - Crossover kg (lb) 0,16 (0.35) Crossover Midrange   Low pass 5,5 kHz @ – 6 dB Oct.Tweeter      Hi pass 5,5k Hz @ – 12 dB Oct. Physical Specs G 102 mm 4.02 in. H 76,5 mm 3.01 in. I 37 mm 1.46 in.   Features 1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.
BUY NOW
HERTZ Mille Legend 6.5 HERTZ Mille Legend 6.5
HERTZ Mille Legend 6.5" 2-Way Component Speaker - Pair (Mlk... $1,784.99
he Hertz MLK 1650.3 Legend car audio speakers system is a two way kit dedicated to purists , aiming at achieving maximum timbre consistency combined with very high dynamics and extremely extended frequency response.Through a solidly built switch, the MLCX 2 TW.3 crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification.Besides, thanks to the Mid-Contour and Hi-Countor controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two “Countor” controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve thieir favourite sound. Component System Size mm (in.) 165 (6.5) Power Handling - Continuous W 150 Power Handling - Peak W 300 Impedance Ohm 4 Tweeter diaphragm mm (in.) 35 (1.38) Woofer Voice Coil Ø mm (in.) 36 (1.4) Tweeter Voice Coil Ø mm (in.) 28 (1.1) Sensitivity dB SPL 92 Frequency Response Hz 40 ÷ 25k Crossover Cut off 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF) Crossover Type 2 Way Passive Crossover Weight of one component - Woofer 1.29 (2.84) Weight of one component - Tweeter kg (lb) 0,1 (0.22) Weight of one component - Crossover kg (lb) 0,57 (1.26) D mm 132 Re Ohm 3,3 Fs Hz 65 Le mH 0,24 Vas I 8,3 Mms g 17,5 Cms mm/N 0,3 BL T*m 7 Qts 0,47 Qes 0,52 Qms 5,3 Spl dB 93
BUY NOW

BEST VALUE

LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and Wiring Harness LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and Wiring Harness
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and... $1,129.00 $1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation. This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade. What’s Included LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U Key Benefits Complete plug-and-play solution with no additional parts required 3 beam modes: Spot, Flood, and BEAST for versatile driving conditions Extended beam distance and wider spread for maximum visibility Heavy-duty construction designed for extreme environments Quick and easy installation with included wiring harness BEAST 230 Driving Light Features 3-mode beam operation: Spot, Flood, and BEAST mode High-output LED performance for long-range and wide visibility Optimised beam pattern for off-road and highway use 5700K colour temperature for clear, natural visibility Large format design for increased light output and coverage Daytime Running Light (DRL) functionality Heavy-duty aluminium housing for durability and heat management Wiring Harness Features Designed specifically for BEAST 3-mode driving lights True plug-and-play installation with no rewiring required Includes HB3 and H4 headlight adaptors Automatic positive and negative switching compatibility Single 8-pin connector for clean installation Includes relay, rocker switch, and mounting hardware Durability and Performance IP69K waterproof and dustproof rating Impact-resistant construction for harsh environments Operating temperature range: -40°C to 85°C Resistant to UV, salt spray, and corrosion Long-lasting LED lifespan Specifications Light Size: 230mm Voltage: 12V system compatible Colour Temperature: 5700K Designed For 4WD and off-road vehicles Touring and long-distance driving Work and utility vehicles Rural and low-light environments Why Choose LIGHTFORCE BEAST 230 Bundle This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility. Order now to upgrade your driving visibility with a complete BEAST lighting setup.  
BUY NOW
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights and Harness LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights and Harness
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights... $999.00 $1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation. Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence. What’s Included 2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1 BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U Key Benefits Complete plug-and-play lighting solution 3 beam modes: Spot, Flood, and BEAST Up to 1260m beam distance for long-range visibility Compact design with extreme durability Quick and easy installation with dedicated wiring harness BEAST 190 Driving Light Features 3-mode beam operation: Spot, Flood, and BEAST mode Up to 1 lux at 1260m (pair) for long-distance performance 25 high-performance Osram LEDs 5700K colour temperature for clear, natural visibility Compact 190mm size with ultra-slim 80mm depth Daytime Running Light (DRL) functionality Pressure die-cast aluminium housing for strength and heat dissipation Beam Modes Spot Mode: Long-distance beam up to 1195m Flood Mode: Wide beam up to 496m BEAST Mode: Combined distance and width up to 1260m Wiring Harness Features Designed specifically for BEAST 3-mode driving lights True plug-and-play installation with no rewiring required Includes HB3 and H4 headlight adaptors Automatic positive and negative switching compatibility Includes relay, switch, and mounting hardware Durability and Performance IP69K waterproof and dustproof rating IK16 impact resistance for extreme durability Operating temperature range from -40°C to 85°C Resistant to UV, salt spray, and corrosion LED lifespan up to 50,000 hours Specifications Diameter: 190mm Depth: 80mm Weight: 1.6kg Voltage: 13.2V Ingress Rating: IP69K Colour Temperature: 5700K Warranty: 5 Years Designed For 4WD and off-road vehicles Touring and long-distance driving Work and utility vehicles Low-light and rural environments Why Choose This Bundle This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions. Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
BUY NOW
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers + Amplifier + Subwoofer + Reverse Camera ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers + Amplifier + Subwoofer + Reverse Camera
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +... $6,930.00 $7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility. Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier ALPINE RS-SB10 Shallow Subwoofer Enclosure ALPINE HCE-C1100 Rear View Drive Assist Camera Key Benefits Complete premium audio and safety system in one bundle Hi-Res Audio performance with powerful, detailed sound Deep, controlled bass from shallow subwoofer design High-output 5-channel amplifier for full system control Wireless Apple CarPlay and Android Auto connectivity Improved reversing safety with rear view camera Seamless integration for LandCruiser 70 Series Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier and advanced sound tuning R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for accurate sound reproduction Glass-fibre reinforced cones for clarity and response HAMR surround for enhanced bass performance Integrated door pods with USB charging and storage HDA-V90 Amplifier Features 5-channel Class-D amplifier with Hi-Res Audio certification Frequency response: 10Hz – 60kHz 75W x 4 + 300W x 1 @ 4Ω output 100W x 4 + 500W x 1 @ 2Ω output High damping factor for precise speaker control Low distortion for clean and accurate sound RS-SB10 Subwoofer Features Shallow 12-inch high-performance subwoofer enclosure 600W RMS and 1800W peak power handling Ultra-compact design for flexible installation Neodymium magnet for high efficiency and power 20mm X-max for deep, controlled bass output Rear View Camera Features Wide viewing angle for improved rear visibility HDR technology for clear image in low light conditions Automatic activation when reversing Day and night image adjustment System Performance High-resolution audio playback across full system Powerful amplified output with deep bass response Balanced sound staging with precise tuning capability Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete premium audio system Off-road and touring vehicles Users wanting high-performance sound and added safety Why Choose This Bundle This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features. Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
BUY NOW
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers $4,679.91 $5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration. Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P Key Benefits Complete premium audio upgrade for LandCruiser 70 Series Dual Cab High-resolution sound with powerful bass and clarity Wireless Apple CarPlay and Android Auto connectivity Factory-style integration with modern design enhancement Additional functionality with storage, USB charging, and lighting i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control Seamless integration designed for LC70 interior R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear for powerful output Hi-Res Audio certified for accurate and detailed sound Glass-fibre reinforced cones for fast response and clarity HAMR surround for increased bass performance and control Neodymium magnet structure for improved efficiency High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated front and rear speaker pods Built-in USB charging ports (up to 4 devices) Integrated puddle lighting for improved visibility at night Storage compartments for bottles, maps, and accessories Durable injection-moulded PC/ABS construction Performance Specifications Peak Power Handling: 300W RMS Power Handling: 100W Nominal Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Woofer Size: 6x9 inch Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers upgrading factory audio systems Off-road and touring vehicles Users seeking premium sound quality and modern connectivity Why Choose This Bundle This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures. Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
BUY NOW
ALPINE LC70 Ultimate Audio System Bundle — Head Unit + Speakers + Amplifier ALPINE LC70 Ultimate Audio System Bundle — Head Unit + Speakers + Amplifier
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +... $5,309.87 $5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power. Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P ALPINE R2-A60F Class-D Digital Amplifier Key Benefits Complete premium audio system upgrade in one bundle High-resolution sound with powerful bass and clarity Amplified performance for maximum output and control Wireless Apple CarPlay and Android Auto connectivity Factory-style integration designed for LC70 Dual Cab i905-LC70 Head Unit Features 9-inch WXGA high-definition display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for dynamic sound performance Advanced sound tuning for customised audio control R2-Series Speaker System Features 6x9-inch R2-Series speakers front and rear Hi-Res Audio certified for detailed and accurate sound Glass-fibre reinforced cones for fast response HAMR surround for increased bass performance High-pass crossover network with adjustable tweeter levels Door Pod Kit Features Direct-fit design for LandCruiser 70 Series Dual Cab Integrated speaker pods front and rear Built-in USB charging ports for up to 4 devices Integrated puddle lighting for improved visibility Storage compartments for everyday convenience Durable PC/ABS construction for long-lasting use R2-A60F Amplifier Features Compact Class-D digital amplifier with reduced footprint Hi-Res Audio certified up to 45kHz Top panel sound controls for easy tuning One-sided terminal layout for simplified installation 100W RMS x 4 @ 4Ω output 150W RMS x 2 @ 2Ω output 300W RMS x 2 @ 4Ω bridged Frequency response: 10Hz – 45,000Hz High damping factor for improved speaker control Performance Specifications Speaker Peak Power: 300W Speaker RMS Power: 100W Impedance: 4 ohms Frequency Response: 60Hz – 40kHz Perfect For Toyota LandCruiser 70 Series Dual Cab Drivers seeking a complete audio system upgrade Off-road and touring vehicles Users wanting powerful, high-quality sound performance Why Choose This Bundle This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems. Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
BUY NOW
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle — Head Unit + Reverse Camera ALPINE LC70 Premium Head Unit & Reverse Camera Bundle — Head Unit + Reverse Camera
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —... $2,789.91 $3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing. Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality. What’s Included ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver ALPINE HCE-C1100 Rear View Drive Assist Camera Key Benefits Complete infotainment and safety upgrade in one bundle Wireless Apple CarPlay and Android Auto connectivity High-definition 9-inch WXGA display Enhanced reversing visibility with wide-angle camera Seamless integration designed for LandCruiser 70 Series i905-LC70 Head Unit Features 9-inch WXGA high-resolution display Wireless Apple CarPlay and Android Auto (USB) Built-in TIDAL for Hi-Res music streaming Supports Hi-Res audio up to 96kHz / 24-bit Built-in Class-D amplifier for superior sound performance Advanced sound tuning for custom audio control Seamless integration with LandCruiser 70 Series interior Rear View Camera Features Wide viewing angle: 131° horizontal, 103° vertical HDR technology for clear vision in low-light conditions Automatic day and night image adjustment RCA or direct Alpine connection compatibility Automatic activation when reversing Compact design with included mounting hardware Camera Specifications Resolution: 640 x 480 Waterproof rating: IP67 Power supply: DC5.0V – DC7.0V Viewing angle: 131° horizontal, 103° vertical Operating temperature: -30°C to +70°C Designed For Toyota LandCruiser 70 Series Off-road and touring vehicles Daily driving and work vehicles Drivers seeking upgraded audio and safety Why Choose This Bundle This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence. Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
BUY NOW
SHOW MORE

© 2026 tjmnorthernbeaches.com.au. All rights reserved. | ABN: 49 121 938 190

🔒Site Secured with SSL 🛡️Encrypted Checkout ✅Powered by Shopify 💳Trusted Payments