AUDIO20JUNE

THG 6.5 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute. Dimensions Dimension A 171.2 mm Dimension B 24.5 mm Dimension C 12 mm

THG 3.0 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

THG 1.5 II optional mesh grilles dedicated to TH 1.5 Violino can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

Audison Thesis TH 6.5 II SAX is a masterpiece of acoustic engineering, designed to ensure extraordinary precision and transparency in sound reproduction. With a diameter of 165 mm, this midrange woofer has been developed to exceed the limits imposed by traditional designs, pushing sound performance to the highest levels without compromise. The heart of the TH 6.5 II SAX is the powerful H-grade neodymium magnet, which generates an extremely stable magnetic field and outstanding energy efficiency, essential for achieving exceptional sound dynamics. The design of the magnetic circuit, optimized through advanced simulation software, focuses the magnetic field to maximize transducer efficiency, offering a fast and accurate response even in delicate mid-range frequencies. Particular attention has been given to the suspension system, a critical element for controlling cone movement. The spider, made of a mix of highly elastic fibers, allows for a linear and distortion-free excursion even under intense use. Similarly, the natural rubber surround is optimized to enable wide cone excursions without mechanically compressing the sound, preserving fidelity to the original source. The 50 mm mobile coil, wound with flat wire in CCAR (Copper Clad Aluminum Ribbon), not only maximizes the force factor but also provides excellent heat dissipation, preventing overheating and ensuring stable performance over time. This technical detail contributes to the total absence of thermal compression, a crucial aspect for maintaining consistent audio quality, even during prolonged listening sessions. The aluminum alloy basket, designed to eliminate unwanted vibrations, further enhances sound clarity. Its structure, with a system of four pairs of spokes, not only offers great structural rigidity but also minimizes air resistance, avoiding aerodynamic compression phenomena that could affect midrange frequencies. In summary, the Audison Thesis TH 6.5 II SAX is much more than just a speaker: it is a concentrate of technological innovation and refined design, created to offer an unparalleled sound experience. Every component has been carefully studied to minimize any form of distortion and compression, ensuring a pure, detailed, and incredibly faithful sound reproduction. Technical Specs Nominal diameter 165 mm (6.5 in) Impedance 4 Ohm Power Handling - Peak 300 W Power Handling - Continuous 150 W Sensitivity 87 dB Frequency Response 40 ÷ 4500 Hz Voice Coil Ø 50 mm Magnet Material NEODYMIUM Magnet size D x d x h 80 x 54 x 4,5 mm Voice Coil Material CCAP - COPPER CLAD ALUMINIUM RIBBON Cone Material TPX® Xmax 5.4 mm (0.21 in) Electric-acoustic Specs Re 3.8 Ohm Fs 55 Hz Le 0.43 mH Vas 8.6 l (0.304 ft) Mms 24.2 g (0.854 oz) Cms 0.35 mm/N BL 8.2 T•m Qts 0.43 Qes 0,47 Qms 5.3 General Weight 1.25 kg Dimensions Dimension A 165 mm (6.5 in) Dimension B 143 mm (5.63 in) Dimension C 84 mm (3.31 in) Dimension D 74.5 mm (2.93 in) Dimension E 170.5 mm Dimension F 30

TH 3.0 II voce - SET MIDRANGE 70mm + GRILLES.The human auditory system processes the range of medium frequencies with maximum sensitivity and selectivity because it makes the voice intelligible from the rest of the audio spectrum. The R&D team started from this simple principle to design from scratch the TH 3.0 II VOCE, dedicated to this fundamental range of frequencies, with the simple as well as ambitious target of extreme linearity, in order not to add or hide anything of the signal reproduced, enhancing in this way every nuance. The extremely powerful custom N38 “H-grade” Neodymium magnet ensures unmatched control of the mobile group and the aluminium ring nullifies the intermodulation distortion otherwise generated at peak excursions.Features -• 30,5 mm mobile voice coil in CCAR (Copper Clad Aluminum Ribbon) wound with flat wire to maximize the force factor and heat dissipation.• Aluminium demodulation ring which linearizes the high excursion intermodulation distortion, canceling any sound colorations.• N38 "H-grade neodymium magnet included in the voice coil to obtain superior control of the mobile crew and superior thermal stability.• Motor geometry designed using finite element simulation software to optimize efficiency by concentrating the magnetic field in the gap.• Membrane made of TPX®, a transparent material that reduces frequency response irregularities and provides a view of the inside of the speaker. Technical Specs Nominal diameter 70 mm (3 in) Impedance 4 Ohm Power Handling - Peak 110 W Power Handling - Continuous 55 W Sensitivity 85.6 dB Frequency Response 110 ÷ 5700 Hz Voice Coil Ø 30.5 mm Magnet Material SPECIAL NEODYMIUM N38H Magnet size D x d x h 29 x 6 x 8 mm Voice Coil Material CCAP - COPPER CLAD ALUMINIUM RIBBON Xmax 3.3 mm (0.13 in) Electric-acoustic Specs Re 3.4 Ohm Fs 100 Hz Le 0.18 mH Vas 1.01 l (0.036 ft) Mms 4.3 g (0.152 oz) Cms 0.59 mm/N BL 4.2 T•m Qts 0.48 Qes 0,52 Qms 5.5 General Weight 0.25 kg Dimensions Dimension A 84 mm (3.31 in) Dimension B 73.5 mm (2.89 in) Dimension C 45 mm (1.77 in) Dimension D 37 mm (1.46 in) Dimension E 89 mm Dimension F 18 Frequency Response  

TH 1.5 II Violino is an extraordinary tweeter featuring a 34 mm CCAW single layer voice coil combining light weight, stability at lower frequencies and total absence of musical transients compression.The extremely powerful custom N38 H-grade Neodymium magnet provides 1.67 T*m in the magnetic gap for superb dynamic response and very low distortion in the whole frequency range.The exclusive air-loading system resulting in a resonance frequency below 800 Hz, for filter set-up starting as low as 1.5 kHz “ 12dB/Oct. The 38 mm natural silk dome has been optimized with extensive material characterization, laser vibrometer scanning and Finite Element Analysis methods for a smooth and extended response. The frequency response is extended up to 26 kHz and is optimized for off-axis installation.The tuning System featuring two types of electro-acoustic load: bottom case or bottom disk according to targets of highest performance as well as flexibility of in-car integration.TH 1.5 II violino features a full solid metal construction structure with each part exclusively designed and produced for the Audison TH 1.5 II.The FEM (Finite Element Method) optimized faceplate and front spokes improve the dispersion pattern. Audison eID technology provides TH 1.5 II traceability starting from the manufacturing stage up to the owner.   Technical Specs Nominal diameter 38 mm (1.5 in) Impedance 6 Ohm Power Handling - Peak 200 W Sensitivity 92.5 dB Frequency Response 800 ÷ 26k Hz Voice Coil Ø 34 mm (1.34 in) Magnet Material NEODYMIUM Dome Material TETOLON FIBRE Cone Material TETOLON FIBER Power Handling Crossover (Hi-Pass filtered @ 1,8kHz - 12 dB Oct.) Electric-acoustic Specs D 38 cm² (5.89 in²) Re 6.1 Ohm Fs 780 Hz Le 0.025 mH Vas 0.019 l Mms 0.43 g (0.015 oz) Cms 0.09 mm/N BL 3.32 T•m Qts 0.83 Qms 2.9 Reference Efficiency 92.5 General Weight 0.355 kg Dimensions Dimension A 71.8 mm (2.83 in) Dimension B 66 mm (2.6 in) Dimension C 37.4 mm (1.47 in) Dimension D 22.4 mm (0.88 in)

Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition. In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5

Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response.

ES3 - BIT ENERGY STORAGE START & STOPIt prevents the processor from shutting down when turning on vehicles featuring the start & stop system. When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables.  

Audison DRC MP CAN is the new high-end remote controller designed for Forza bit DSP amplifiers and future Audison devices with a DRCC port. The white OLED display ensures excellent visibility under all cabin lighting conditions, with a 160-degree viewing angle. The RGB LED backlit keyboard seamlessly integrates with the car’s dashboard. When audio streaming from the B-CON is active, the main fast forward (FFW) and rewind (RRW) controls will be available on the DRC MP CAN display. The joystick allows for easy navigation of the menu, providing quick access to main functions such as master volume, subwoofer volume, mute, and more. This controller offers perfect integration with the B-CON and B-CON go app, allowing full control of audio streaming when the B-CON is present. The master volume can be managed both from the DRC MP CAN and the mobile device, with real-time synchronization with the app. The device allows for the selection of up to six DSP memories, offering maximum flexibility for any audio needs. Additionally, the Audison DRC MP CAN enables the activation and deactivation of the Final EQ and manages the different zones configured in the bit Drive software. The provided cable features the same terminations as the DRC AC, ensuring a quick and straightforward connection. Features Broad Compatibility: Specifically designed to work with Audison Forza series amplifiers and any new Audison products equipped with the CAN BUS protocol. Advanced Integration: Works flawlessly with the B-CON and B-CON go. App, enabling: Audio streaming control when paired with a B-CON. Master volume control: Via both the DRC MP CAN and your mobile device. Real-time synchronization: With the B-CON go App for on-the-fly adjustments. Versatile Memory Selection: Offers up to six DSP memory selections, allowing you to tailor the sound to your preference or driving scenario. Sophisticated Design: Features an RGB LED backlit keyboard that blends seamlessly with your car’s dashboard aesthetics. Comprehensive Control: Navigate through the menu with an intuitive joystick, providing quick access to essential functions like Master Volume, Sub Volume, Mute, and more. Enhanced Visibility: The white OLED display boasts a wide viewing angle of 160 degrees, ensuring clear visibility under any cabin lighting conditions. Custom Zone Management: Allows for managing different zones configured in the bit Drive SW. EQ Control: Easy activation and deactivation of the Final EQ for perfect sound tuning.

Audison DRC MP is an advanced remote control designed to offer a wide range of customization and management options for high-quality audio systems installed in vehicles. This device is essential for those seeking precise and versatile control of their audio system, providing intuitive and convenient management directly from the vehicle's dashboard. The DRC MP (Digital Remote Control Multi-Processor) has been developed to work in synergy with Audison Bit series processors, allowing users to easily modify and adjust various audio parameters. With its ergonomic design and robust construction, the DRC MP integrates seamlessly into the car dashboard, offering immediate access to main functions such as volume, source selection, and equalization. The device features an intuitive user interface and a clear display that shows all the necessary information for effective control. Adjustments can be made in real time, allowing you to tailor the sound to personal preferences and varying listening conditions. The ability to save and recall custom presets makes the DRC MP extremely versatile, suitable for different musical styles and driving situations. Additionally, the DRC MP supports the management of multiple audio zones, allowing independent control of sound in different areas of the vehicle. This is particularly useful for vehicles with complex audio systems or multi-amplifier setups. The ease of installation and compatibility with various Audison processors make it a valuable addition for any car audio enthusiast. In summary, the Audison DRC MP is a high-quality remote control that provides users with detailed and flexible control over their audio system, enhancing the listening experience with simple and intuitive management directly from the vehicle. Features Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Aux 1, Aux 2,Digital Electric, Digital Optical). DRC Settings:Keybord color, Keybord brightness, Display brightness, Discreet screen, Mainscreen logo (through the DRC MP joystick). DSP Memory:Audison compatible products memories selection. DSP Settings:Dynamic EQ, Bass Boost, AutoIN Level Adj.Player Menu:bit Play HD off delay. Navi Command:navigation of bit Play HD (through the DRC MP joystick). Available only with compatible Audison products connected Available only with bit Play HD connected

Adjust master volume, tweak subwoofer level, switch sources, and recall DSP presets in seconds. Designed for a seamless OEM-style fit, it blends perfectly into any interior while RGB LED indicators keep everything clear, day or night. With a single cable for power and control, installation is fast and clean. Fully compatible with a wide range of Audison processors, the DRC AC is your perfect interface for precision sound with a touch of style. Features • RGB LED Feedback: colored LEDs show volume position and active functions, making control simple and intuitive. • Software Programmable Functions: use bit Drive software to assign up to 5 custom functions, each with its own LED color. • Compatible with DSPs featuring CANBUS: works with Audison DSPs equipped with CANBUS communication via the DRCC port. • Compact and Easy to Install:  choose surface or flush mounting to match your vehicle’s style. • One Cable, Zero Hassle: a single DRCC cable handles both power and control for fast and clean installation. • Automatic LED Sleep Mode: LEDs dim after 5 seconds of inactivity for a minimal and elegant dashboard. • Updatable Firmware: stay current with simple PC firmware updates for future enhancements.

The Audison DRC AB is a sophisticated remote control unit designed to enhance your vehicle's audio experience. This advanced device allows you to manage and customize your car's audio system with precision and ease. The DRC AB features an intuitive interface that lets you control all key audio functions, such as volume, sound sources, and equalizer settings, directly from the dashboard. The unit's sleek and compact design makes it easy to integrate into the vehicle's dashboard without compromising the interior's aesthetics. The clear, easy-to-read display provides real-time information about audio settings, ensuring immediate control and minimal distraction while driving. One of the main features of the DRC AB is its ability to manage and save custom presets. This allows users to store their preferred audio settings and access them quickly, facilitating adjustments to different musical styles and driving conditions. Additionally, the DRC AB supports managing multiple audio zones, making it ideal for vehicles with complex audio setups or multiple amplifiers. This functionality enables independent sound control in different areas of the vehicle, providing an optimal audio experience for all passengers. Installation of the DRC AB is straightforward and quick, thanks to its compatibility with a wide range of Audison processors and interfaces. This device offers a versatile and powerful solution for car audio enthusiasts seeking precise and customizable control of their audio system. In summary, the Audison DRC AB is the perfect choice for those who want advanced and intuitive control of their audio system, significantly enhancing the listening experience while driving.   Features Default Menu:Master Volume, Subwoofer Volume, Fader, Balance, Source selector (Main, Aux 1,Digital Optical 1 2). Audison bit Nove memories selection.

RCA connector for effortless and fast connections between the head unit PRE OUTs (2 V min.) and bit Ten, bit Ten D Hi-Level inputs.

The Audison Bit Ten is a versatile and high-performance digital signal processor designed to enhance and optimize your vehicle's audio system, transforming any setup into a high-quality sound system. Thanks to its ability to manage and process audio signals with precision and detail, the Bit Ten allows you to achieve a balanced and faithful sound, perfectly adapted to the acoustic characteristics of the cabin. This device allows you to connect original or aftermarket audio sources, providing complete control over every aspect of the sound through an intuitive and advanced user interface. The Bit Ten offers the ability to adjust equalization parameters, crossover filters, and time delay management, allowing for sound optimization according to the specific needs of the user and the vehicle. Installing the Bit Ten is simple and flexible, designed to easily integrate with a wide range of car audio systems, whether existing or new. Thanks to its compact size and versatility, the Bit Ten can be installed in various locations within the cabin without taking up excessive space. The Bit Ten stands out for its ability to significantly improve the audio quality of the vehicle's system, turning every trip into a superior listening experience. This digital processor is the ideal choice for those who want to customize and perfect their audio system, ensuring clear, powerful, and high-fidelity sound in any situation.   DSP Tech Data Nominal power supply voltage / Fuse 11 ÷ 15 VDC Channels 5 Sample Rate 24 bit / 48 kHz Hi Level Inputs 4 Low Level Inputs 4 Digital Inputs 0 Processing Method Fixed point Idling current 0.4 A Switched off without DRC MP 2.5 mA Switched off with DRC MP 4 mA Remote IN 7 ÷ 15 VDC (1.3 mA) Remote OUT 12 VDC (130 mA) Signal Stage Distortion - THD @ 1 kHz, 1 VRMS Output 0.005 % Bandwidth @ -3 dB 10 ÷ 22k Hz S/N ratio @ A weighted, 4 V Output, 2 V MASTER input 96 dBA S/N ratio @ A weighted, 4 V Output, OPTICAL IN1/IN2 input 95 dBA Channel Separation @ 1 kHz 85 dB Input sensitivity AUX 0.6 ÷ 5 V RMS Input impedance Pre In 15 kΩ Input impedance Speaker In / AUX 2,2 kΩ Max Output Level 0.1% THD 4 V RMS Input Stage Low level (Pre) AUX IN High Level (Speaker In) FL - FR - RL - RR - PHONE IN Output Stage Low level (Pre) FRONT L/R, REAR L/R, SUB Connection From / To Personal Computer 1 x USB / B (1.1/2.0) Crossover Filter type Full / High Pass/ Low Pass/ Band Pass Filter mode and slope Linkwitz @ 12/24 dB Butterworth @ 6/12/18/24 dB Crossover Frequency 68 steps @ 20 ÷20k Hz Phase control 0° ÷ 180° Time Alignment Distance 0 ÷ 510 cm / 0 ÷ 200.8 in. Delay 0 ÷ 15 ms Step 0,08 ms; 2,8 cm / 1.1 in.

Audison Bit Nove DRC Signal Interface Processor with 6 Channels In and 9 Channels Out with 2 Optical Inputs works with Maestro AR with DRC AB Remote Included bit Nove is a powerhouse of technology fully dedicated to listening pleasure: since 2007, the year in which the bit One was first introduced, Audison has never stopped delivering innovation to the digital processors segment. The bit Nove was born from this unique know-how within the industry, the perfect tool to expand a car audio system maximizing its performance.   POWER SUPPLY Voltage: 10.8 ÷ 15 VDC Operating power supply voltage: 7.5 ÷ 14.4 VDC Idling current: 0.53 A Switched off without DRC: 1 mA Switched off with DRC: 4.5 mA Remote IN voltage:4 ÷ 15 VDC (1mA) Remote OUT voltage: 10 ÷ 15 VDC (130 mA) ART (Automatic Remote Turn ON): 2 ÷ 7 VDC SIGNAL STAGE Distortion - THD @ 1 kHz, 1 VRMS Output: 0.005% Bandwidth @ -3 dB: 10 Hz ÷ 22 kHz S/N ratio @ A weighted Master Input: 102 dBA AUX Input: 101.5 dBA OPTICAL IN1 / IN2 Inputs: 110 dBA Channel Separation @ 1 kHz: 85 dBA Input sensitivity Pre Master: 1.2 ÷ 8 VRMS Input sensitivity Speaker Master: 3 ÷ 20 VRMS Input sensitivity AUX Master: 0.3 ÷ 5 VRMS Input impedance Pre In / Speaker In / AUX: 15 kΩ / 12 Ω / 15 kΩ Max Output Level (RMS) @ 0.1% THD: 4 V INPUT STAGE Low level (Pre): Ch1 ÷ Ch6; AUX L/R High Level (Speaker In): Ch1 ÷ Ch6 Digital: 2 x Optical S/PDIF; Max 192 kHz / 24 bit OUTPUT STAGE Low level (Pre): Ch1 ÷ Ch9 CONNECTION From / To Personal Computer: 1 x Micro USB To Audison DRC AB / DRC MP: 1 x AC Link Optical 2 sel: Optical In 2 wire control +12 V enable Mem D sel: Memory D wire control GND enable CROSSOVER Filter type: Full / Hi pass / Low Pass / Band Pass Filter mode and slope: Linkwitz @ 12/24 dB - Butterworth @ 6/12/18/24 dB Crossover Frequency: 68 steps @ 20 ÷ 20k Hz Phase control: 0° / 180° EQUALIZER (20 ÷ 20K Hz) Analog Input: Equalizer Automatic De-Equalization Output Equalizer: N.9 Parametrics Equalizers: ±12 dB;10 pole; 20 ÷ 20k Hz TIME ALIGNMENT Distance: 0 ÷ 510 cm / 0 ÷ 200.8 inches Delay: 0 ÷ 15 ms Step: 0,08 ms; 2,8 cm / 1.1 inch Fine: SET 0,02 ms; 0,7 cm / 0.27 inch GENERAL REQUIREMENTS PC connections: USB 1.1 / 2.0 / 3.0 Compatible Software/PC requirements: Microsoft Windows (32/64 bit): Vista, Windows 7, Windows 8, Windows 10 Video Resolution with screen resize: min. 1024 x 600 Ambient operating temperature range: 0 °C to 55 °C (32 °F to 131 °F) SIZE W (Width) x H (Height) x D (Depth) mm/inch: 130 x 34.5 x 199 / 5.11” x 1.35” x 7.83”

The Bit DMI is a high-quality digital interface designed to connect the original digital sources of a vehicle with Audison signal processors, ensuring a signal transmission free from disturbances and without loss of quality. This device allows you to maintain the original functionalities of the vehicle's audio system while integrating high-end audio solutions for a superior listening experience. The Bit DMI is compatible with the digital systems of major automotive manufacturers, thanks to its ability to convert native digital signals into signals compatible with signal processors. This ensures a faithful audio reproduction, preserving the integrity of the original sound and enhancing its quality through the advanced signal management provided by Audison processors. Installing the Bit DMI is simple and non-invasive, designed to integrate perfectly with the vehicle's onboard electronics without compromising the original functionalities of the system. Moreover, its compact and discreet design allows for flexible installation in different types of vehicles, without requiring substantial modifications. In summary, the Bit DMI is an ideal solution for those who want to enhance their vehicle's audio performance while maintaining compatibility with the original systems, ensuring excellent sound quality and perfect integration with the existing instrumentation.   Features MOST optical input The Audison bit DMI connects via optical fiber to the OEM multimedia system. S/PDIF optical output to transfer audio data in Stereo PCM 16bit format, 44.1kHz/48kHz (depending on the system) for use with Audison products with digital input. Digital controls USB/mini B (2.0) for connection to your PC. Configuration via USB and the appropriate software, the Audison bit DMI can be programmed and updated to work with vehicles equipped with MOST technology. Start controls: the bitDMI switches on and off automatically upon activation or deactivation of the car’s MOST system and generates the Remote Out signal to turn on your amplifier Integration with the OEM source Volume, balance and tone controls are kept intact as well as service signals of the car audio system, such as the handsfree calls, navigator and parking sensors. bit DMI software Windows-based (Win2000, XP, Vista, Windows 7, Windows 8).

The Audison B-CON is an advanced Bluetooth 5.0 receiver specifically designed for automotive use, which has obtained the "Hi-Res Audio Wireless" certification from the Japan Audio Society. This device is the ideal choice for those seeking high-quality audio streaming from Hi-Res players such as Fioo or Sony Walkman, as well as from the latest Android and Apple smartphones. The B-CON is compatible with all audio formats and delivers maximum performance with uncompressed Bluetooth streaming (up to 96 kHz / 24 bit), available only on Android devices compatible with the LDAC codec. This allows for superior sound quality when playing local audio files or using streaming services like Tidal and Qobuz. The device integrates RCA analog outputs and Toslink optical digital outputs, offering versatile connections to high-quality audio systems. With the implementation of the LDAC codec, the B-CON ensures a frequency response up to 40 kHz, providing an immersive and faithful listening experience. Additionally, the B-CON supports handsfree call management and features "Absolute Volume" to preserve the dynamic range of the audio signal, preventing quality loss during volume adjustments. In summary, the Audison B-CON is an essential accessory for car audio enthusiasts seeking a superior listening experience without compromising sound quality.   Receiver Tech Data Power Supply Voltage 6 ÷ 24 VDC Idling Current 70 mA Remote IN 3 ÷ 12 VDC (0.5 mA) Bluetooth Data Type: Bluetooth 5.0 + EDRCodec: LDAC, AAC, SBCProfile: Bluetooth A2DP 1.3, AVRCP 1.6 Digital Input Optical: S/PDIF Optical (Max 24 bit/192 kHz) Digital Output Optical: S/PDIF Optical (Max 24 bit/192 kHz) Analog Output Performance Bandwidth (Max) 20 ÷ 48k HzOutput Level 2 VRMSDistortion – THD @1 kHz, 1 VRMS 0.003%S/N RATIO (A weighted) 100 dBA   Features Up to 96 kHz / 24-bit BT streaming LDAC codec compatibility for Android devices ACC codec compatibility for iOS devices Automatic handsfree call manage Absolute volume function, to ensure a full dynamic range audio signal Digital output Analog RCA outputs Digital optical input with pass-through capability to the Digital output (no DA/AD signal conversion) Additional micro-USB power plug for non-automotive use

AUDISON AP BIT - Automatic Speaker Presence AP bit Automatic speaker presence adapter Resistance for OEM radios/amplifiers in combination with AP bit processors Usually used on the rear channels when the signal level can not be set In order to solve the problem associated with OEM amplifiers that feature signal interruption, shutting down when a proper speaker “load” is not present as often found in aftermarket integration, the Prima amplifiers feature ASP (Automatic Speaker Presence). Available as an optional plug-in accessory, this circuit provides the ability to simulate the OEM speakers’ presence during the short time frame the hea

Accessories | Plug&Play T-Harness to install Audison AF bit on BMW | Compatible with BMW “Standard” or “Hi-Fi” 676 system and BMW 688 Harman/Kardon This Plug&Play T-Harness allows to install an Audison AF bit amplifier on BMW vehicles equipped with RAM modules. It is compatible with "Standard" and "HI-FI" 676 sound systems (It is also compatible with 688 HK-branded systems, but only delivers 7 of the 9 channels required). This harness delivers the 7 speaker-level outputs of the RAM to the inputs of your AF amplifier and also provides speaker leads for front, rear, underseat woofer, and center - so you can configure your AF amplifier as desired. NOTE: not compatible with AP BMW ASD BYPASS – Active Sound “artificial exhaust note” defeat requires vehicle coding.

The Bit One HD Virtuoso is the most advanced digital signal processor in the Audison lineup, designed to meet the demands of the most discerning audiophiles and those seeking a perfect listening experience in their vehicle. This device represents the pinnacle of audio technology, offering extraordinary sound quality thanks to its ability to handle high-definition audio signals up to 24-bit/96 kHz. Equipped with a highly sophisticated signal processing architecture, the Bit One HD Virtuoso allows for the management and optimization of every aspect of the vehicle's acoustics. With support for 13-channel processing, this processor offers exceptional flexibility in audio system configuration, enabling detailed customization to achieve balanced and precise sound, perfectly adapted to the vehicle's interior specifications. The Bit One HD Virtuoso also stands out for its advanced user interface, which allows intuitive and precise adjustment of all parameters, including crossover filters, 10-band parametric equalization for each channel, and time delay management. These features enable the creation of a unique listening experience, where every sonic detail is enhanced and reproduced with maximum fidelity. The installation of the Bit One HD Virtuoso is designed to seamlessly integrate with the most complex audio systems, both OEM and aftermarket. Its compatibility with high-resolution audio formats and USB connectivity ensures unparalleled sound quality, transforming the vehicle's interior into a concert hall on wheels. In summary, the Bit One HD Virtuoso is the ideal choice for those who desire the best in digital signal processing for their car audio system. With this device, every journey becomes an immersive and extraordinary sonic experience, with audio quality that exceeds all expectations.

The Audison AVG 6.5 S II grille combines modern aesthetics with robust protection, featuring a striking silver finish that adds a contemporary edge to your vehicle’s design. This grille is specifically engineered to protect the AV 6.5 P II woofers from debris and impacts, ensuring sound transparency is maintained. Tailored for the AV 6.5 P II speakers, it guarantees easy installation and seamless integration within the vehicle’s interior, enhancing both the style and quality of your car audio system. Features Modern Aesthetics: Features a striking silver finish that adds a contemporary edge to your car’s design, standing out in both style and quality. Protective Design: Made to protect the AV 6.5 P II woofers from debris and impacts while maintaining excellent sound transparency. Tailored Integration: Precisely designed for the AV 6.5 P II speakers, ensuring easy installation and a seamless look within the vehicle’s interior.

The Audison AVG 6.5 B II mesh grille is designed to blend seamlessly into any vehicle interior with its sleek, black finish, adding a touch of sophisticated subtlety. Constructed from durable materials, it offers robust protection for the AV 6.5 P II woofers, shielding them from physical damage and environmental factors. This grille is engineered specifically for a perfect fit with the AV 6.5 P II, ensuring flawless integration and enhancing the overall aesthetic of your audio setup.

Audison AV CX 2W MB VOCE Series 2-Way Crossover - Tweeter + Woofer (Pair)Especially designed for the AV K5 and AV K6 two-way complete systems, shapes their acoustic response to achieve a consistent, harmonious sound in any vehicle, also offering the acoustic controls necessary to achieve the best balance according to one’s own taste.

6.5″ 2-Way Component Speakers The new Audison Prima APK 165 P two-way loudspeaker system, capable of handling up to 345 W peak, is the ideal combination to fully exploit the power of the AP F8.9 bit or all other Prima amplifiers used in high power configurations. The exclusive AIF technology (Any Install Faceplate) of the AP 1P Tweeter provides the installer with 3 different faceplates for total application versatility and a significant reduction in installation time. The woofer has been designed to perform at its best in OEM placements, combining excellent power handling and efficiency. Features: AP 1P AIF technology (Any Install Faceplate) for total application versatility and a significant reduction in installation time. Three mounting accessories supplied to provide a solution for any type of installation. Magnetic group with double Neodymium tablet for an excellent high frequency extension. 1 CCAW voice coil for superior dynamic response. Dome profile optimized with FEM simulations for a wide off-axis dispersion. AP 6.5P Increased excursion of the mobile group for a superior dynamic response. Optimized electro-acoustic parameters to maximize performance for OEM placements. Magnetic group sized for perfect control even at maximum cone excursion. CCAW (Copper-Clad Aluminium Wire) voice coil (32 x 14 mm) to optimally manage the greater applied power. Compact size basket for easy OEM installations. APCX P 2T, APCX P 2W Separate ultra-compact crossovers for tweeters and woofers to minimize space requirements and simplify cable routing, facilitating the specialist work. Use of components selected and sized for the management of high power avoiding saturation. Asymmetric slope filtering, 12 dB/oct on the tweeter and 6 dB/oct on the woofer for an optimal balance between the two components Specifications: Woofer Size: 165 mm Tweeter Size: 29 mm Woofer Voice Coil Diameter: 32 mm Tweeter Voice Coil Diameter: 25 mm Magnet Size Woofer: 100 x 40 x 18 Power Handling – Peak: 345 W Power Handling – Continuous: 115 W Sensitivity: 92.5 dB Impedance: 4 Ohm Frequency Response: 50 ÷ 24k Crossover Woofer: Low-Pass: 4 kHz @ 6 dB/Oct Crossover Tweeter: Hi-Pass: 4 KHz @ 12dB/Oct. Adjustment Tweeter Level: Tweeter Level; 0 / +3 Woofer Cone Diameter: 132 mm Xmax Woofer: 5.6 mm

Designed to deliver impactful low-frequency performance in a refined, space-conscious format, the AVBX 12 D4 II combines the full authority of a 12-inch VOCE II subwoofer with an ultra-compact sealed enclosure optimized for modern vehicle interiors. Equipped with the AV 12 D4 II driver—featuring a dual 4-ohm voice coil—the enclosure provides superior power handling and system flexibility, allowing for high-output configurations without compromising clarity or control. The high-density 15 mm MDF structure, reinforced with internal bracing, ensures excellent mechanical stability and damping, while the sealed design produces tight, extended bass with natural decay and definition. Engineered for true musicality, the enclosure reproduces every nuance of the low-frequency spectrum with depth and precision. Its 2S² dual-orientation architecture allows both Down-Firing and Up-Firing installation, adapting to acoustic goals and available trunk space. The Sub Smart Plug terminal simplifies connections with a hybrid interface offering Plug-&-Play and push-connect options, ready for high-current wiring.   Every element of the AVBX 12 D4 II is developed to express the VOCE II vision: no excess, no compromise—just deep, elegant and controlled bass designed to enhance every listening moment on the road.   Technical Specs Nominal diameter 300 mm Impedance 4+4 Ohm Power Handling - Peak 1100 W Power Handling - Continuous 550 W Sensitivity 84.5 dB Frequency Response 25-400 Hz Chassis Material ALUMINIUM Magnet Material HIGH DENSITY FLUX FERRITE Voice Coil Material CCAW Former Material GLASS FIBER Cone Material POLYPROPYLENE WITH MICA INJECTION Surround Material RUBBER Xmax 16.8 mm Xmech 20 mm Voice Coil Winding Height 37 mm Gap Height 7 mm Driver Displacement Volume 0.9 l Electric-acoustic Specs D 539 cm² Re 1.8 Ohm Fs 23 Hz Le 1.8 mH Vas 63 l Mms 298 g Cms 0.15 mm/N BL 12.2 T•m Qts 0.5 Qms 6.2 Reference Efficiency 85 Dimensions Dimension A 607 mm Dimension B 401 mm Dimension C 175 mm Dimension D 35.2 mm Dimension C1 133 mm

The AVBX 10 D4 II is the compact subwoofer enclosure of the VOCE II line, designed to bring high-end low-frequency performance into tight installation spaces—without compromise. Its ultra-shallow sealed architecture is engineered to deliver tight, accurate and dynamic bass while preserving valuable in-vehicle space. Built from high-density 15 mm MDF with internal bracing, the enclosure ensures maximum rigidity and effective damping, eliminating unwanted resonances and coloration. The internal volume and damping are acoustically matched to the AV 10 D4 II subwoofer, which features a dual 4-ohm voice coil for greater wiring flexibility in high-power system configurations. This pairing guarantees seamless integration and controlled low-end response, even in space-limited applications. Thanks to the 2S² dual-orientation design, the enclosure can be installed in Down-Firing or Up-Firing configuration, adapting to available space and acoustic goals. The Sub Smart Plug terminal combines Plug-&-Play convenience with traditional push connectors, ensuring fast, secure and high-current-ready wiring. The enclosure’s refined styling reflects the visual identity of the VOCE II speaker line, combining performance and elegance in a single, integrated solution.   Compact, precise and ready to perform, the AVBX 10 D4 II is the ideal solution for adding impactful, controlled bass to OEM or custom installations—where space is limited but expectations are high. Technical Specs Nominal diameter 250 mm Impedance 4+4 Ohm Power Handling - Peak 1100 W Power Handling - Continuous 550 W Frequency Response 25 - 400 Hz Chassis Material ALUMINIUM Magnet Material HIGH DENSITY FLUX FERRITE Voice Coil Material CCAW Former Material GLASS FIBER Cone Material POLYPROPYLENE WITH MICA INJECTION Surround Material RUBBER Xmax 16.8 mm Xmech 20 mm Voice Coil Winding Height 37 mm Gap Height 7 mm Driver Displacement Volume 0.6 l Electric-acoustic Specs D 368 cm² Re 1.82 Ohm Fs 36 Hz Le 1.8 mH Vas 14.8 l Mms 250 g Cms 0.07 mm/N BL 11.2 T•m Qts 0.7 Qms 5.62 Reference Efficiency 83.5 Dimensions Dimension A 531 mm Dimension B 361 mm Dimension C 160 mm Dimension D 32.9 mm Dimension C1 118 mm

The Focal Inside IW IMP 2.1  car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and a subwoofer (two bridged channels), such as the PSB 200, without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility 

The Focal Inside IW IMP 2.2 car radio car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the IMPULSE 4.320 to be easily connected to two front channels and two ISUB Twin subwoofers without changing the original wiring. Quick and easy Plug and Play installation Direct link from the amplifier to your original car radio Connection to the extension cable via ISO connectors No soldering required Length: 1 foot (0.3m) Global vehicle compatibility

Focal IW BMW IMP 2.1 BMW/IMPULSE 4.320 Car Harness   The BMW 2.1 IMP HARNESS connection cables are designed for connecting BMW speaker drivers and theIMPULSE 4.320 compact 4-channel digital amplifier.The specific BMW connectors make installation simple. This cable enables amplification of a vehicle's front speakers across 2 channels, and amplification of two BMW subwoofers over the other two channels of the IMPULSE 4.320 amplifier.

The Focal Inside BMW/MINI Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier, as well as the FIT 9.660 ultra-compact 9-channel amplifier/DSP. It allows the quick and simple connection of the BMW/MINI original head unit and of Focal Inside extension cables. * Compatibility: BMW and MINI vehicles between 2009 - 06/2019 - Compatibility to be checked with an installer. Additional Information Designed specifically for your vehicle Quick and easy Plug and Play installation Direct link from the amplifier to your original head unit Connection to the extension cable via ISO connectors No soldering required Length: 3.28ft (1 m)

FOCAL ACX 100AUDITOR EVO SERIES 4" 2-WAY CAR SPEAKERS The benefit of Focal innovation Focal designed their updated Auditor EVO Series speakers in France. That's a big deal — it means that these entry-level car speakers were reimagined by some of the same minds that design their flagship models. You'll recognize staples of Focal's famous sound: the inverted dome tweeter for precise treble and an improved soundstage; a polypropylene cone for a neutral and dynamic sound; and a butyl surround for impressive responsiveness. The aim of Auditor EVO Focal's goal is to improve the audio experience in any type of car, and these impressive ACX 100 4" coaxial speakers will easily outperform your factory speakers and bring the fun back to your drive time. Prepare for a new level of richness in the midrange, and Focal's acclaimed inverted dome tweeter, with its handsome black lacquered finish, broadcasts high-frequency details that put standard tweeter designs to shame. An integrated, high-fidelity crossover ensures that the woofer handles only the lower frequencies and the tweeter only handles the highs, giving you a smooth sound overall. Ready to ride A polypropylene woofer cone and butyl rubber surround help these speakers live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound. Product highlights: 2-way car speakers (pair) 4" polypropylene woofer cone with butyl rubber surround Mylar inverted dome tweeter rigid steel basket mesh/ABS mesh grilles included handles up to 30 watts RMS (60 watts peak) frequency response: 80-21,000 Hz sensitivity: 88 dB impedance: 4 ohms mounting depth: 1-15/16" warranty: 1 year MFR # ACX100 Item # 091ACX100 Features & specs General Speaker Size 4 Design 2-way Tweeter Design Inverted Dome Impedance (Ohms) 4 Tweeter Composition Mylar Woofer Composition Polypropylene Woofer Surround Butyl Rubber Parts Warranty 1 Year Labor Warranty 1 Year Specifications Sensitivity (1W at 1 meter) N/A Sensitivity at 2.83 volts 88 Frequency Response 80 - 21k Hz Minimum RMS Wattage --- Maximum RMS Wattage 30 Peak Power Handling (Watts) 60 Top-mount Depth (Inches) 1 15/16 Bottom-mount Depth (Inches) 2 1/8 Cutout Diameter or Length (inches) 3 11/16 Mounting Height (Inches) 0.443 Frame Width 4.027 Frame Length 4.027 What's in the box: Two 2-way speakers 2 Grilles Focal owner's manual 2 Grille mounting rings Eight 1" Screws 8 Speed clips Owner's manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Dutch/ Polish/ Chinese/ Russian/ Korean/ Japanese/ Arabic)

Alpine BRV-S40C BassRev 4" 2-Way Component Speakers with HEDGE Surround Technology Experience premium sound quality from a compact speaker upgrade with the Alpine BRV-S40C BassRev 4" 2-Way Component Speaker System. Designed using Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology that delivers enhanced bass performance while preserving the exceptional clarity, detail, and accuracy that Alpine is known for. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S40C produces rich sound with surprising low-frequency performance from a compact speaker format. Ideal for factory speaker replacement applications, these speakers offer a significant upgrade in overall audio quality and listening enjoyment. Key Features 4" (125mm) 2-Way Component Speaker System designed for superior audio performance in compact installations. Exclusive HEDGE Surround Technology increases cone excursion for enhanced bass response. Lightweight Polypropylene Woofer Cone provides rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth and detailed high-frequency reproduction. Large 75mm Strontium Ferrite Magnet Structure improves efficiency and speaker control. 25mm Woofer Voice Coil supports improved power handling and dynamic output. High-Quality Audio-Grade Tweeter Crossover Network for seamless frequency integration. Neodymium Tweeter Magnets ensure precise and articulate treble response. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP processing. Advanced HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise speaker excursion while maintaining precise control. The BRV-S40C can achieve up to 20mm of maximum linear excursion, delivering impressive bass performance within the critical 67Hz–120Hz range. This advanced surround design enables deeper bass output, improved punch, and greater sound pressure levels compared to conventional factory speakers, creating a fuller and more engaging listening experience. Lightweight Polypropylene Woofer Cone The BRV-S40C features a specially engineered polypropylene woofer cone that combines lightweight construction with excellent rigidity. This design effectively resists unwanted resonance and vibration, allowing the speaker to maintain clean, balanced sound reproduction even at higher volume levels. The result is improved bass accuracy, enhanced midrange clarity, and lower distortion across the entire frequency range. Large Magnet Structure for Increased Output Built with a large 75mm Strontium Ferrite magnet and oversized 25mm voice coil, the BRV-S40C is designed to maximise speaker control and efficiency. This powerful motor structure works together with Alpine’s HEDGE surround technology to deliver stronger bass response, increased output capability, and greater overall sound performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with exceptional precision. Featuring lightweight polyester diaphragms and powerful Neodymium magnets, the tweeters deliver smooth, natural, and highly detailed high-frequency reproduction. Enjoy wider sound staging, improved imaging, and enhanced musical detail without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S40C tweeters feature removable housings and trim rings that allow compact installation into many factory tweeter locations. Suitable mounting positions include: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexible design allows installers to maintain a factory-style appearance with minimal modification while achieving optimal sound performance. OPTIM™Sync Technology Compatibility The BRV-S40C is compatible with Alpine’s advanced OPTIM™Sync processing when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies speaker-specific equalisation and dynamic bass enhancement to unlock deeper bass extension, improved tonal balance, and enhanced overall audio performance. Technical Specifications Model Alpine BRV-S40C Speaker Type 2-Way Component Speaker System Woofer Size 4" (125mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 25mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 75mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 120 Watts RMS Power Handling 40 Watts RMS (CTA-2031 Compliant) Frequency Response 75Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 40W RMS Per Channel Woofer Dimensions Frame Diameter 10.08 cm Cut-Out Diameter 9.5 cm Mounting Depth 4.49 cm Mounting Height 0.69 cm Magnet Diameter 7.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S40C 4" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S40C? Advanced HEDGE surround technology for enhanced bass performance Premium polypropylene woofer cone for accurate sound reproduction Large magnet structure and 25mm voice coil for improved output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design Compatible with Alpine OPTIM™Sync DSP tuning technology Excellent factory speaker replacement solution Legendary Alpine sound quality and reliability The Alpine BRV-S40C BassRev 4" Component Speaker System delivers impressive bass, exceptional clarity, and detailed high-frequency performance in a compact package, making it the perfect upgrade for drivers seeking premium sound quality from factory speaker locations.

Alpine BRV-S65C BassRev 6.5" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's sound system with the Alpine BRV-S65C BassRev 6.5" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering deeper bass response, improved cone control, and exceptional sound clarity while maintaining Alpine’s renowned audio precision. Featuring a lightweight polypropylene woofer, powerful Strontium Ferrite magnet structure, and precision 1-inch polyester soft dome tweeters, the BRV-S65C provides rich low frequencies, detailed vocals, and crystal-clear highs. Designed as a premium factory speaker replacement, these speakers offer a significant upgrade in performance for a wide variety of vehicles. Key Features 6.5" (165mm) 2-Way Component Speaker System engineered for superior audio performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper and more impactful bass. Lightweight Polypropylene Woofer Cone delivers excellent rigidity with reduced distortion. 1" Polyester Soft Dome Tweeters reproduce smooth and detailed high frequencies. Large Strontium Ferrite Magnet Structure improves efficiency and speaker control. 40mm Woofer Voice Coil supports increased power handling and dynamic output. High-Quality Audio-Grade Crossover Network ensures seamless integration between woofer and tweeter frequencies. Neodymium Tweeter Magnets provide precise and articulate treble reproduction. OEM-Compatible Tweeter Mounting System for easy installation in factory locations. OPTIM™Sync Compatible when paired with Alpine OPTIM™8 DSP Amplifier. Revolutionary HEDGE Surround Technology Alpine’s innovative HEDGE (High Excursion Design Gathered Edge) surround technology is specifically engineered to maximise low-frequency performance. By allowing greater cone travel while maintaining exceptional control, the BRV-S65C achieves impressive bass output within the critical 40Hz–80Hz range. Capable of achieving up to 28mm of maximum linear excursion, these speakers produce powerful bass response that adds depth and impact to your music without compromising overall sound quality. Lightweight Polypropylene Woofer Cone The BRV-S65C features a durable polypropylene woofer cone designed to remain lightweight yet highly rigid. This advanced cone material effectively resists unwanted resonance and vibration, allowing for accurate and balanced sound reproduction even during demanding listening conditions. The result is cleaner bass response, improved midrange detail, and lower distortion at higher volume levels. Large Magnet Motor Structure Equipped with oversized 95mm Strontium Ferrite magnets and large 40mm voice coils, the BRV-S65C is built to deliver enhanced speaker control, increased efficiency, and greater sound pressure levels. Combined with HEDGE surround technology, this powerful motor structure produces louder, punchier sound with improved low-frequency extension. Polyester Soft Dome Tweeters with Neodymium Magnets The included 1-inch polyester soft dome tweeters are engineered to reproduce subtle details and upper-frequency harmonics with outstanding precision. Lightweight polyester diaphragms combined with powerful Neodymium magnets provide exceptional clarity, smoothness, and accuracy throughout the high-frequency range. Enjoy improved sound staging, wider imaging, and immersive listening performance with every drive. OEM-Friendly Tweeter Installation The BRV-S65C tweeters are designed for versatile installation with removable housings and trim rings that reduce overall size for OEM integration. This compact design allows installation into many factory tweeter locations including: A-Pillars Mirror Sail Panels Factory Tweeter Housings Door Trim Locations This flexibility enables a clean, factory-style appearance with minimal modification required. OPTIM™Sync Technology Compatibility The BRV-S65C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. OPTIM™Sync intelligently applies dynamic bass enhancement and speaker-specific equalisation profiles to unlock deeper bass performance, smoother tonal balance, and improved overall sound quality. Technical Specifications Model Alpine BRV-S65C Speaker Type 2-Way Component Speaker System Woofer Size 6.5" (165mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 40mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 95mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 38Hz – 20kHz Impedance 4 Ohms Sensitivity 84dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 16.5 cm Cut-Out Diameter 15.6 cm Mounting Depth 7.13 cm Mounting Height 1.09 cm Magnet Diameter 9.5 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S65C 6.5" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S65C? Advanced HEDGE surround technology for powerful bass performance Premium polypropylene woofer cone for accurate sound reproduction Large 40mm voice coil and 95mm magnet structure for increased output Detailed polyester soft dome tweeters with Neodymium magnets OEM-friendly installation design for factory locations Compatible with Alpine OPTIM™Sync DSP processing Excellent factory speaker replacement upgrade Legendary Alpine engineering and sound quality The Alpine BRV-S65C BassRev 6.5" Component Speaker System delivers deep bass, exceptional clarity, and premium sound quality, making it the ideal upgrade for drivers seeking an immersive and powerful in-car audio experience.

Alpine BRV-S80C BassRev 8" 2-Way Component Speakers with HEDGE Surround Technology Upgrade your vehicle's audio performance with the Alpine BRV-S80C BassRev 8" 2-Way Component Speaker System. Developed from Alpine’s decades of acoustic engineering expertise, the BassRev Series introduces innovative HEDGE (High Excursion Design Gathered Edge) technology, delivering powerful bass response while maintaining the exceptional clarity, detail, and precision Alpine is renowned for. Designed as a premium factory speaker replacement, the BRV-S80C combines an 8-inch lightweight polypropylene woofer with a precision 1-inch polyester soft dome tweeter to produce deep bass, detailed midrange frequencies, and crystal-clear highs. Whether powered by a factory head unit or aftermarket amplifier, these speakers deliver immersive sound with outstanding balance and dynamic performance. Key Features 8" (200mm) 2-Way Component Speaker System engineered for superior sound quality and bass performance. Exclusive HEDGE Surround Technology maximises cone excursion for deeper, more impactful bass. Lightweight Polypropylene Woofer Cone provides excellent rigidity and reduced distortion. 1" Polyester Soft Dome Tweeters deliver smooth, detailed high-frequency reproduction. Large Strontium Ferrite Magnets increase driver force and efficiency. High-Quality Audio-Grade Tweeter Crossovers ensure seamless frequency integration. Neodymium Tweeter Magnets offer precise and articulate high-frequency response. Flush Mount & OEM-Friendly Tweeter Design for easy installation in factory locations. Compatible with Alpine OPTIM™8 DSP for advanced OPTIM™Sync bass optimisation. Ideal Factory Speaker Upgrade for a wide range of vehicles. All-New HEDGE Surround Technology At the heart of the BRV-S80C is Alpine’s revolutionary HEDGE (High Excursion Design Gathered Edge) surround technology. Specifically engineered to maximise low-frequency output, HEDGE dramatically increases cone travel while maintaining control and accuracy. The result is powerful bass response within the critical 35Hz–80Hz frequency range, delivering impressive low-end impact and a maximum linear excursion peak of 28mm. You'll experience bass that is not only heard but felt, without sacrificing clarity or balance. Lightweight Polypropylene Woofer Cone The BRV-S80C utilises a specially engineered polypropylene woofer cone that combines lightweight construction with exceptional rigidity. This advanced material minimises unwanted resonance and distortion while maintaining structural integrity under demanding listening conditions. Even at high volume levels and large cone excursions, the woofer reproduces music with smooth, accurate, and balanced performance across the entire frequency spectrum. Large Magnet Structure for Greater Output Featuring oversized 100mm Strontium Ferrite magnets and large 35mm voice coils, the BRV-S80C is built to deliver increased cone control and higher sound pressure levels. Combined with Alpine’s HEDGE surround technology, this powerful motor structure enables louder output, improved efficiency, and deeper bass performance. Premium Soft Dome Tweeters The included 1-inch polyester soft dome tweeters provide exceptional high-frequency detail and smooth tonal balance. Designed with lightweight polyester diaphragms and powerful Neodymium magnets, these tweeters accurately reproduce subtle musical details, transients, and harmonics for an expansive and immersive listening experience. The result is precise imaging, excellent sound staging, and crystal-clear highs without harshness or listening fatigue. OEM-Friendly Installation Design The BRV-S80C tweeters feature a collapsible housing and removable trim ring, allowing installation into many factory tweeter locations including: A-Pillar Mounts Mirror Sail Panels Factory Tweeter Pods Door Trim Locations This flexible design enables a clean, factory-style installation while preserving the vehicle's original interior appearance. OPTIM™Sync Compatible Performance The BRV-S80C is fully compatible with Alpine’s OPTIM™Sync technology when paired with the Alpine OPTIM™8 DSP Amplifier. This advanced processing platform intelligently applies dynamic bass enhancement and custom equalisation profiles specifically tuned for BassRev speakers, unlocking deeper bass, improved tonal balance, and enhanced overall performance. Technical Specifications Model Alpine BRV-S80C Speaker Type 2-Way Component Speaker System Woofer Size 8" (200mm) Woofer Cone Material Polypropylene (PP) Surround Technology HEDGE (High Excursion Design Gathered Edge) Woofer Voice Coil 35mm Woofer Magnet Material Strontium Ferrite Woofer Magnet Size 100mm Tweeter Size 1" Polyester Soft Dome Tweeter Voice Coil 20mm Tweeter Magnet Material Neodymium Crossover Network High-Quality Audio-Grade Tweeter Crossover Peak Power Handling 150 Watts RMS Power Handling 50 Watts RMS (CTA-2031 Compliant) Frequency Response 35Hz – 20kHz Impedance 4 Ohms Sensitivity 87dB/W Recommended Amplification Up to 50W RMS per Channel Woofer Dimensions Frame Diameter 20.96 cm Cut-Out Diameter 19.7 cm Mounting Depth 8.55 cm Mounting Height 1.09 cm Magnet Diameter 10.0 cm Tweeter Dimensions Frame Diameter 5.8 cm Mounting Diameter 5.1 cm Mounting Depth 1.76 cm Height 2.54 cm What's Included 2 x Alpine BRV-S80C 8" BassRev Woofers 2 x 1" Polyester Soft Dome Tweeters 2 x Audio-Grade Tweeter Crossovers Tweeter Flush Mount Hardware OEM-Compatible Tweeter Mounting Components Protective Speaker Grilles Installation Hardware User Documentation Why Choose the Alpine BRV-S80C? Advanced HEDGE surround technology for deeper bass response Premium polypropylene woofer for clean, distortion-free sound Powerful Strontium Ferrite magnet motor structure Detailed and smooth polyester soft dome tweeters OEM-friendly installation design OPTIM™Sync compatibility for enhanced bass performance Perfect upgrade from factory vehicle speakers Legendary Alpine engineering and sound quality The Alpine BRV-S80C BassRev 8" Component Speaker System delivers the ideal balance of powerful bass, detailed highs, and exceptional clarity, making it the perfect audio upgrade for drivers seeking premium sound performance in any vehicle.

Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Experience powerful, controlled bass without sacrificing valuable cargo space with the Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer. Developed from Alpine’s decades of acoustic engineering expertise, the PWV-SB10 combines advanced DSP processing, premium enclosure construction, and high-output performance to deliver deep, impactful bass while maintaining Alpine’s renowned sound clarity and precision. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, this compact powered subwoofer is engineered to compete with larger traditional subwoofer enclosures. Whether paired with a factory head unit or a complete aftermarket audio system, the PWV-SB10 delivers exceptional low-frequency performance with effortless integration. Key Features 10" BassRev™ Slim-Line Powered Subwoofer designed for powerful and accurate bass reproduction. Integrated 400W RMS Class-D Amplifier with built-in DSP processing for maximum efficiency and performance. Exclusive OPTIM™Sync Technology dynamically optimises bass output and tonal balance. Compact Shallow Enclosure Design for flexible installation in cars, SUVs, utes and 4WDs. Sealed Enclosure Construction enhances low-end punch, impact and musical accuracy. Premium Carpeted MDF Enclosure with reinforced double-brace structure for superior rigidity. Extended Protective Grille protects the woofer from cargo movement and accidental damage. High-Level and RCA Inputs for compatibility with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control and Phase Adjustment for precise tuning. Dual 4-Ohm Voice Coil Design engineered for efficient power handling and performance. Revolutionary OPTIM™Sync Technology Alpine’s proprietary OPTIM™Sync algorithm is specifically engineered to maximise the performance of BassRev audio components. Integrated directly into the PWV-SB10’s DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ optimisation to safely extend low-frequency output while maintaining tonal accuracy and control. The result is richer, deeper bass with greater impact and musical detail than conventional powered subwoofers, creating an immersive listening experience across all genres of music. Integrated High-Power Class-D Amplifier The built-in 400W RMS amplifier delivers efficient, high-output power while maintaining compact dimensions and low heat generation. Advanced onboard tuning controls make it easy to optimise bass performance to suit your vehicle and listening preferences. 400W RMS Continuous Power 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Adjustable Gain Control Select-able Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built for long-term durability and consistent performance, the PWV-SB10 features a carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises vibration and unwanted resonance, allowing the subwoofer to deliver clean, accurate bass even at higher volume levels. An extended protective grille safeguards the woofer from everyday impacts while maintaining a clean and professional installation appearance. Groundbreaking X-Max Excursion Design The BassRev 10" subwoofer incorporates an ultra-wide rubber surround engineered for maximum linear cone excursion and increased sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in powerful bass output with outstanding clarity and precision. Factory & Aftermarket Audio Integration The Alpine PWV-SB10 is designed to integrate seamlessly into both factory and aftermarket audio systems. High-level speaker inputs allow direct connection to factory-installed head units, while RCA inputs provide straightforward integration with aftermarket amplifiers and processors. The slim enclosure profile allows convenient installation behind seats, in cargo areas, or other space-limited locations while preserving valuable interior room. Technical Specifications Model Alpine PWV-SB10 Subwoofer Size 10 Inch (25.4 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Nominal Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed Carpeted MDF Enclosure Dimensions 47.0 cm (W) x 28.3 cm (H) x 12.7 cm (D) Weight 9.7 kg What's Included 1 x Alpine PWV-SB10 BassRev 10" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB10? Revolutionary OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Compact slim-line enclosure ideal for limited installation space Deep, punchy bass that rivals larger enclosure designs Premium MDF cabinet with reinforced double-brace construction Compatible with factory and aftermarket audio systems Legendary Alpine sound quality, engineering and reliability Upgrade your vehicle audio system with the Alpine PWV-SB10 BassRev Powered Subwoofer and enjoy powerful low-frequency performance, exceptional clarity and immersive sound quality wherever your journey takes you.

Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer with 400W RMS Amplifier & OPTIM™Sync DSP Transform your driving experience with the Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer. Engineered with Alpine’s decades of acoustic expertise, this powerful subwoofer combines advanced DSP technology, premium construction, and high-output bass performance in a compact enclosure designed to fit a wide range of vehicles. Featuring Alpine’s revolutionary OPTIM™Sync technology and an integrated 400W RMS Class-D amplifier, the PWV-SB12 delivers deep, controlled bass response while maintaining exceptional clarity and musical accuracy. Designed to compete with larger full-size subwoofer enclosures, the PWV-SB12 produces impactful low-frequency performance without sacrificing valuable cargo space. Whether you're upgrading a factory audio system or enhancing an aftermarket setup, this powered subwoofer delivers the powerful bass your music deserves. Key Features 12" BassRev™ Slim-Line Powered Subwoofer engineered for powerful low-frequency performance. Integrated 400W RMS Class-D Amplifier with DSP processing for efficient, high-output sound. Exclusive OPTIM™Sync Technology dynamically optimises bass performance and tonal balance. Compact Shallow Enclosure Design allows flexible installation in a variety of vehicle applications. Sealed Enclosure Construction enhances bass punch, impact, and low-frequency accuracy. Premium Carpeted MDF Enclosure with double-brace structure for maximum rigidity and reduced resonance. Extended Protective Grille safeguards the woofer from cargo, pets, and daily wear. High-Level and RCA Inputs for easy integration with factory and aftermarket audio systems. Variable Low-Pass Filter, Gain Control, and Phase Adjustment for precise system tuning. Dual 4-Ohm Voice Coil Design for optimised performance and efficiency. Revolutionary OPTIM™Sync Technology At the heart of the BassRev Series is Alpine’s proprietary OPTIM™Sync bass optimisation algorithm. Preloaded into the integrated DSP amplifier, OPTIM™Sync intelligently applies dynamic bass enhancement and pre-EQ tuning specifically engineered for the PWV-SB12. This advanced processing safely extends low-frequency output, smooths frequency response, and maximises overall performance without sacrificing sound quality. The result is deeper, fuller bass that remains controlled, accurate, and musical at all listening levels. Integrated High-Power DSP Amplifier The built-in 400W RMS Class-D amplifier provides efficient power delivery while maintaining compact dimensions and low heat output. Advanced onboard controls allow seamless system integration and custom tuning for optimal sound performance. 400W RMS Power Output 800W Peak Power Handling Variable Low-Pass Filter Phase Control (0° / 180°) Gain Adjustment Selectable Turn-On Modes High-Level Speaker Inputs Low-Level RCA Inputs Premium MDF Enclosure Construction Built to withstand daily driving conditions, the PWV-SB12 features a robust carpeted MDF enclosure reinforced with a double-brace internal structure. This premium construction minimises unwanted vibrations and enclosure resonance, allowing the subwoofer to deliver clean, accurate bass even at high volume levels. An extended metal grille protects the woofer from accidental impacts while maintaining a clean, factory-style appearance. Groundbreaking X-Max Excursion Design The BassRev 12" subwoofer utilises a durable ultra-wide rubber surround that supports increased cone excursion and higher sound pressure levels. This advanced design allows the woofer to move more air while maintaining excellent control, resulting in deeper bass extension, improved impact, and exceptional clarity. Easy Integration with Factory & Aftermarket Systems The Alpine PWV-SB12 is designed for effortless integration with virtually any vehicle audio system. High-level speaker inputs allow installation in factory-equipped systems without requiring aftermarket head units, while RCA inputs provide simple connectivity to aftermarket processors and amplifiers. Its slim enclosure design allows flexible mounting options while preserving cargo space and maintaining a clean, professional installation. Technical Specifications Model Alpine PWV-SB12 Subwoofer Size 12 Inch (30.48 cm) Amplifier Type Integrated Class-D Amplifier with DSP RMS Power Handling 400W RMS Peak Power Handling 800W Peak Impedance 2 Ohms (Dual 4 Ohm Voice Coils) Frequency Response 31Hz – 200Hz Phase Control 0° / 180° Low-Pass Filter 50Hz – 200Hz Variable (-24 dB/Octave) Input Sensitivity High-Level: 0.5V – 10VRCA: 0.2V – 2.0V Enclosure Type Sealed MDF Enclosure Dimensions 53.3 cm (W) x 34.3 cm (H) x 16.8 cm (D) Weight 14.5 kg What's Included 1 x Alpine PWV-SB12 BassRev 12" Slim-Line Powered Subwoofer Integrated 400W RMS DSP Amplifier Power Connection Plug Adaptor Installation Hardware User Documentation Why Choose the Alpine PWV-SB12? Advanced OPTIM™Sync DSP bass optimisation technology Powerful 400W RMS integrated amplifier Deep, punchy bass from a compact slim-line enclosure Premium MDF cabinet with reinforced construction Factory and aftermarket system compatibility Flexible installation for cars, SUVs, utes, and 4WDs Legendary Alpine sound quality and reliability Upgrade your vehicle's audio performance with the Alpine PWV-SB12 BassRev Powered Subwoofer and experience deeper bass, greater impact, and premium sound quality wherever the road takes you.

The AlpineStyle LXR-CL30 Camping Lights provide versatile, high-performance illumination for any adventure. Compact and easy to install, these lights are perfect for 4WD canopies, trays, caravans, awnings, gazebos, and more. With multiple colour modes, a built-in dimmer switch, and durable, weatherproof construction, LXR-CL30 ensures reliable lighting in even the harshest conditions. FEATURES Three Colour Modes – Amber, Cool White, or Cool White + Amber High-Output 6.2W OSRAM™ OSLON LED Modules – 50,000+ hours lifespan Magnetic Backing for Easy Installation – Quick temporary mounting Mounting Holes for Permanent Installation – Bolt/screw for secure positioning Built-in Dimmer Switch – Adjust brightness easily anytime IP68 & IP69K Rated – Dustproof, waterproof, and high-pressure resistant Waterproof Connector & Tail Lead Included – Simplifies installation Insect Repelling Amber Spectrum – Minimises attraction to insects Durable Construction – High-quality Dupont finish SPECIFICATIONS Panel Size: 60 cm Raw Lumen Output: 3000 lm Colour Temperature: 1650K–6700K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 9.2W (High) / 1.8W (Low) Current Draw: 0.7A @ 13.2V (High) / 0.13A @ 13.2V (Low) Operating Temperature: -40° ~ 145°C Paint Finish: Dupont

Compact yet powerful, the Alpine Style LXR-AM3 3-Inch LED Worklight delivers high-output illumination for tight mounting locations without compromising performance. Designed for modern 4×4 setups, this rugged worklight is perfect for off-road adventures, work sites, camping, and night driving. Built tough with precision engineering, it offers reliable, long-lasting performance in even the harshest conditions.   FEATURES Spotlight Beam Type – Focused long-distance illumination for precision lighting LEXAN™ 143R Polycarbonate Resin Lens – High-impact, UV-resistant, thermally stable IP68 & IP69K Rated – Dustproof, waterproof, and resistant to high-pressure washes High-Output OSRAM® 10W LED Modules – Powerful light with 50,000+ hour lifespan Includes Wiring Harness – Waterproof connectors for easy installation Robust 6063 Aluminium Housing – Durable, heat-dissipating body Steel Mounting Hardware Included – Secure and adjustable installation Included Gloss Black Alpine Style Lens Cover – Protects lens when not in use SPECIFICATIONS Panel Size: 3-Inch Raw Lumen Output: 4416 lm 1 Lux Distance: 173 m Colour Temperature: 5700K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 27W Current Draw: 2.1A @ 13.2V Operating Temperature: -40° ~ 145°C Paint Finish: Dupont

Compliment your build with the AlpineStyle LXR-SP6 LED RGB Rock Lights, a premium lighting solution designed for serious off-road performance and visual impact. Sold as a set of six high-output RGB pods, these lights deliver powerful, even illumination on the trail, at camp, or on display. With full app control, instantly adjust colours, brightness, zones, and dynamic effects from your smartphone. Choose from millions of colours or crisp white light, blending function and flair for night driving or show mode. Built to withstand mud, water, dust, and vibration, the LXR-SP6 provides reliable performance in the harshest conditions. Featuring low-profile design and robust Lexan™ 143R lenses, these modules can be mounted in wheel wells, underbody accents, engine bays, side rails, and more, giving you total versatility and complete lighting control.   FEATURES Osram RGBW LED Chipset – Full spectrum RGB + crisp white 50,000+ Hour Lifespan – Long-lasting, reliable illumination IP68 & IP69K Rated – Dustproof and high-pressure water resistant App Control – iOS & Android via included Bluetooth receiver module* Includes Wiring Harness – Waterproof connectors for easy installation Robust 6063 Aluminium Housing – Excellent heat dissipation and durability 316 Stainless Steel Mounting Hardware Included Lexan™ 143R Resin Lens – High impact and UV resistant *It is recommended to install the Bluetooth receiver module away from direct exposure to the elements. SPECIFICATIONS Size: 2.5-Inch Power: 9W LED Beam Angle: 120° LED Module Lifespan: Up to 50,000 Hours Operating Voltage: 10–30V DC Waterproof Rating: IP68, IP69K

Engineered for explorers who demand durability and performance, the AlpineStyle AltitudeMax LXR-AM20 delivers powerful, wide-reaching illumination for ultimate on and off-road visibility. Featuring high-output OSRAM® LED modules, ultra long-distance beam projection, and IP68 & IP69K water and dust protection, it provides reliable lighting in the toughest conditions. With a rugged steel alloy housing, impact-resistant LEXAN™ lens, universal mounting versatility, included wiring harness, and protective lens covers, the LXR-AM20 is designed for uncompromising performance—see further, drive longer, and tackle extreme terrain with confidence. FEATURES Combination Beam Pattern – Spot & Flood for maximum distance and wide coverage LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 5W LED Modules 50,000+ Hour LED Lifespan Includes Wiring Harness with waterproof connectors Heavy-Duty 6063 Aluminium Housing for superior heat dissipation 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 22-Inch Raw Lumen Output: 95,200 lm 1 Lux Distance: 528 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 87W Current Draw: 6.6A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

32" AltitudeMax Slimline LED High Output Light Bar Alpine Style's ultimate high-output lightsbars are engineered to flood and focus the trail with blistering, long-range illumination, cut through darkness to expose every obstacle. Built tough for extreme conditions and precision crafted for reliable performance. Pair relentless power with Alpine Style's signature durability for night-time expeditions and off-road missions. Features Osram LED Chipset Robust 6063 Aluminium Housing Includes 316 Stainless Hardware IP68 & IP69K Waterproof Rating Combination Beam Includes Wiring Harness

Built for explorers who refuse to stop where the road ends, the AlpineStyle AltitudeMax LXR-AM40 delivers powerful, wide-reaching illumination for ultimate on and off-road visibility. Featuring high-output OSRAM® LED modules, ultra long-distance beam performance, and IP68 & IP69K water and dust protection, it’s engineered to handle the harshest environments with confidence. With a rugged steel alloy housing, impact-resistant LEXAN™ lens, universal mounting versatility, and included wiring harness and lens covers, the LXR-AM40 combines uncompromising performance, durability, and refined Alpine Style design—ready for any adventure, anywhere. FEATURES Combination Beam Pattern – Spot & Flood for maximum distance and wide coverage LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 5W LED Modules 50,000+ Hour LED Lifespan Includes Wiring Harness with waterproof connectors Heavy-Duty 6063 Aluminium Housing for superior heat dissipation 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 42-Inch Raw Lumen Output: 19,040 lm 1 Lux Distance: 608 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 190W Current Draw: 14.4A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

Built to handle the toughest terrain, the AlpineStyle LXR-SP7 delivers powerful, controlled illumination with rugged reliability and sleek, OEM-inspired styling. Featuring high-output OSRAM® LED modules, integrated white and amber DRLs, and IP68 & IP69K water and dust protection, it provides confident visibility through rocky trails, dense bush, and remote backcountry. With an impact-resistant Lexan™ lens, advanced heat dissipation, universal vehicle fitment, and included protective lens covers, the LXR-SP7 is engineered for uncompromising performance—push further, drive longer, and tackle extreme conditions with confidence.   FEATURES Combination Beam Pattern – Spot & Flood for distance and wide coverage Integrated White / Amber Daytime Running Lights (DRL) LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 7-Inch Beam Angle: 120° Raw Lumen Output: 21,600 lm 1 Lux Distance: 768 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 96W Current Draw: 7.3A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

Designed for serious off-road use, the AlpineStyle LXR-SP9 delivers powerful long-distance illumination with rugged reliability and refined, OEM-inspired styling. Featuring high-output OSRAM® LEDs, integrated white & amber DRLs, and IP68 & IP69K water and dust protection, it provides confident visibility across rocky trails, bush tracks, and remote terrain. Built with an impact-resistant Lexan™ lens, advanced heat dissipation, and a durable cast alloy housing, the LXR-SP9 is engineered to perform in the harshest conditions—no compromises, just dependable lighting where it matters most. FEATURES Combination Beam Pattern – Spot & Flood for distance and wide coverage Integrated White / Amber Daytime Running Lights (DRL) LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 9-Inch Beam Angle: 120° Raw Lumen Output: 27,000 lm 1 Lux Distance: 903 m Colour Temperature: 6000K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 121W Current Draw: 9.18A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

Built for serious night driving, the AlpineStyle LXR-UX7 combines rugged construction with refined, OEM-inspired styling. Featuring a crisp 6500K daylight beam, high-output OSRAM® LEDs, and IP68 & IP69K water and dust protection, it delivers exceptional long-distance visibility with reliable performance in the harshest environments. Its low-profile design, impact-resistant Lexan™ lens, advanced heat dissipation, and included protective lens covers make the LXR-UX7 a durable, versatile lighting solution for utes, SUVs, and off-road vehicles—engineered to perform hard and look right at home on any build. FEATURES Combination Beam Pattern – Spot & Flood for distance and wide coverage LEXAN™ 143R Polycarbonate Resin Lens – High impact and UV resistant IP68 & IP69K Rated – Dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 7-Inch Beam Angle: 120° Raw Lumen Output: 22,330 lm 1 Lux Distance: 1,354 m Colour Temperature: 6500K LED Module Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 92W Current Draw: 7A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

ExpeditionUltra 9-Inch High Output LED Spotlights Engineered for extreme conditions, the AlpineStyle LXR-UX9 delivers powerful, daylight-clear illumination with a sleek, low-profile design. Featuring premium OSRAM® LED modules, a crisp 6500K daylight beam, and IP68 & IP69K water and dust protection, it provides exceptional long-distance visibility and reliable performance in the harshest environments. Built with a robust alloy housing, advanced heat dissipation, and impact-resistant Lexan™ lens, the LXR-UX9 is designed to look sharp, perform hard, and last the distance—on road or off it. FEATURES Combination Beam Pattern – Spot & Flood for maximum distance and wide coverage LEXAN™ 143R Polycarbonate Lens – Impact-resistant and UV stable IP68 & IP69K Rated – Fully dustproof and high-pressure water resistant High-Output OSRAM® 6W LED Modules 50,000+ Hour LED Lifespan Heavy-Duty 6063 Aluminium Housing for superior heat dissipation Includes Wiring Harness with waterproof connectors 7mm Cast Alloy Mounting Hardware Included Protective Lens Covers Included SPECIFICATIONS Panel Size: 9-Inch Beam Angle: 120° Raw Lumen Output: 30,706 lm 1 Lux Distance: 1,539 m Colour Temperature: 6500K LED Lifespan: 50,000+ Hours Operating Voltage: 10–30V DC Power Consumption: 132W Current Draw: 10A @ 13.2V Operating Temperature: -40° to 145° Finish: Dupont Paint Coating

AV uno is an amplifier featuring an innovative circuitry called POD (Power On Demand); it provides at the final stage in AB class a dynamic power that serves as a tracker to the signal to be amplified so as to increase efficiency and reduce the temperature. AV uno allows to combine the plus points, in terms of audio quality and robustness, of the AB Class traditional amplifiers with the efficiency of the D Class amplifiers. AMP (Amplifier Management Processor) constantly checks the operating status system and communicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isn’t available from the source. AV uno is a mono amplifier designed to drive the subwoofer but also suitable for high power Dual Mono systems.

4-Channel Amplifier The Audison Voce AV quattro is a four-channel amplifier capable of working in four, three, or two-channel modes, and delivering a total power of 1700 W (RMS). It is designed to handle complex front/rear and multichannel system configurations.  The AMP (Amplifier Management Processor) constantly monitors the operating status of the operating system and communicates with the user through 4 different colored LEDs located on the top panel. ART (Automatic Remote Power On/Off) enables automatic power on/off when no remote signal is available from the source. Filters with cut off slope up to 24 dB/oct. allow for front-rear, front-sub or multi-amplified systems while always having an unfiltered signal available at the output for system expansion. Features: Hi-Res audio certification thanks to 4 ÷ 60k Hz bandwidth Four, three, or two-channel modes operation 4 x 200 W @ 2-ohm audiophile AB Class Built-in 24 dB/oct filters with bass-boost and subsonic Specifications: Amplifier Tech Data Channels: 4 Class: AB-Class Hi Level Input: Yes Low Level Input:Yes Digital Input: No Power supply voltage / fuse: 11 ÷ 15 VDC Idling current: 1.8 A Idling current when off: 0.02 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power: 55 A Remote OUT: 12 VDC – 50mA Remote IN: 7 ÷ 15 VDC – 1mA ART – Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable): Selectable Amplifier Stage Total Power RMS: 800 W Minimum load impedance: 2Ω Output Power (RMS) @14.4 VDC, 1% THD:4 Ch: 120 W x 4 (4Ω)4 Ch: 200 W x 4 (2Ω)4 Ch: 120 W x 2 (4Ω) + 200 W x 2 (2Ω)3 Ch: 120 W x 2 (4Ω) + 400 W x 1 (4Ω)3 Ch: 200 W x 2 (2Ω) + 400 W x 1 (4Ω)2 Ch: 400 W x 1 (4Ω) + 400 W x 1 (4Ω) Adjustable Crossover: Yes

AV due is a powerful stereo amplifier with the power supply section and final stage designed to work also in mono and tri-mode, ensure very high output current, with powers up to 900 W (RMS). AMP (Amplifier Management Processor) constantly checks the operating status system and comm unicates with the user through 4 different coloured LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal isnâ„¢t available from the source. Amplifier Tech Data Channels 2 Class AB-Class Hi Level Input Yes Low Level Input Yes Digital Input Yes Power supply voltage / fuse 11 ÷ 15 VDC Idling current 1.7 A Idling current when off 0.02 mA Consumption @ 14.4 VDC, 2Ω, Max Musical Power 65 A Remote OUT 12 VDC - 50mA Remote IN 7 ÷ 15 VDC - 1mA ART - Automatic Remote Turn on/off from OUTPUT BTL speakers (Selectable) Selectable Amplifier Stage Distortion - THD @ 100 Hz, 4Ω, 70% Rated Power 0.04 % Bandwidth A (-3 dB, 2 VRMS, 4 Ω): 4 ÷ 60k Hz S/N ratio A (A weighted @ 1 V): 100 dBA Damping factor A (1kHz, 4 Ohms): 120 Input sensitivity Pre-In 0.3 ÷ 5 V RMS Pre In Impedance 15k Ω Input sensitivity Speaker-In 1.4 ÷ 24 V RMS Input impedance Speaker-In 5k Ω Total Power RMS 900 W Minimum load impedance 2Ω Output Power (RMS) @14.4 VDC, 1% THD • 2 Ch: 260 W x 2 (4Ω)• 2 Ch: 450 W x 2 (2Ω)• 1 Ch: 900 W x 1 (4Ω) Adjustable Crossover Yes CEA Specifications Output power @ 4Ω, 1% THD+N, 14.4 V Output power @ 4Ω, 1% THD+N, 14.4 V: 260 W x 2 Ch SN ratio (ref. 1W output) SN ratio (ref. 1 W output): 80 dBA Inputs Input Type Pre IN / Speakers IN Filters Outputs Pre OUT Full Range Filter Pass A (Full / Hi-Pass / Lo-Pass): 50 ÷ 5k Hz (2 range) @ 12 dB/Oct. Filter Pass B (Lo-Pass 24 dB mono): 50 ÷ 500 Hz @ 24 dB/Oct. Remote Sub Volume -50 ÷ 6) dB Other Fuse 60 A Weight 7.2 kg Dimensions Dimension A 470 mm Dimension B 399 mm Dimension C 220 mm Dimension D 198 mm Dimension E 58 mm