FRONT RUNNER Toyota Tacoma (2015-2023) 6' Bed Alu-Cab Explorer Canopy...
$1,800.00
$2,000.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Explorer Canopy . The rack size is approximately 1255mm/49.4" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Explorer Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTD10 - SLII Tray - 1255mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 27.36kg (60.32lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 170mm (7")Shipping Weight:Weight: 31kg (68lbs)
FRONT RUNNER Toyota Tacoma (2015-2023) 6' Bed Alu-Cab Contour Canopy...
$1,875.60
$2,084.00
This kit includes a full-size rack for the Toyota Tacoma Alu-Cab Contour Canopy. The rack size is approximately 1345mm/53" (W) x 1964mm/77.3" (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This kit is only suitable for Alu-Cab Contour Canopy.
Consisting of:4x FASS024 - Foot Set / 50mm - 60mm4x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 29.03kg (64lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1720mm (68")Height: 160mm (6")Shipping Weight:Weight: 34kg (75lbs)
FRONT RUNNER Pickup Truck Canopy Or Trailer Slimline Ii Rack...
$1,568.70
$1,743.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 1500mm/59.1" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)1x TRCA004 - Canopy Tracks / 1500mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 28.17kg (62.1lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")Shipping Weight:Weight: 29kg (64lbs)
FRONT RUNNER Jeep Gladiator Jt (2019-Current) Rsi Smart Canopy Slimline...
$1,399.50
$1,555.00
This 1358mm/53.5" long, full-size, Slimline II cargo carrying roof rack kit for the Jeep Gladiator JT RSI Smart Canopy contains a Slimline II Tray, Wind Deflector, and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTG07 - SLII Tray - 1345mm(W)X1358mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 24.65kg (54.34lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 155mm (6")Shipping Weight:Weight: 25kg (55lbs)
FRONT RUNNER Rsi Smart Canopy Slimline Ii Rack Kit /...
$1,507.50
$1,675.00
This 1762mm/69.4" long, full-size, Slimline II cargo carrying roof rack kit for the RSI Extra Cab Smart Canopy contains a Slimline II Tray, Wind Deflector and 6 Feet. Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x FASS024 - Foot Set / 50mm - 60mm3x RRAC921 - Canopy Rack Kit Installation Set1x RRSTA09 - SLII Tray - 1165mm(W)X1762mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 26.68kg (58.82lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 155mm (6")Shipping Weight:Weight: 27.6kg (61lbs)
Front Runner Cargo Slide / Fridge Slide 40L–52L 113kg Load...
$423.00
$470.00
Front Runner Cargo Slide / Fridge Slide 40L–52L
The Front Runner Cargo Slide / Fridge Slide 40L–52L (FSLI002) is a practical and heavy-duty storage solution designed to make accessing portable fridges, toolboxes, storage containers, and touring equipment quick and effortless. Built for 4WDs, ute trays, canopies, drawer systems, and commercial vehicles, this slide maximises accessibility while using minimal storage space.
Featuring high-strength bearing drawer slides, the tray extends nearly 100% from its anchored base, allowing easy access to your fridge or equipment without climbing into your vehicle. The unique rattle-free design keeps the slide secure while travelling, while the integrated clip latch locks the tray firmly in the closed position for added safety.
Constructed from durable black powder-coated steel and supplied with mounting hardware for both wood and metal surfaces, the Front Runner Cargo Slide is engineered to withstand demanding touring, off-road, and worksite conditions.
Features
Suitable for 40L–52L portable fridges
High-strength bearing drawer slide system
Nearly 100% tray extension for easy access
Rattle-free design during travel
Secure clip latch locking system
Hold-open mechanism for uneven terrain
Mounts to most flat surfaces
Compatible with Front Runner Drawer Systems
Pre-drilled mounting holes for easy installation
Includes mounting hardware for wood and metal surfaces
Heavy-duty black powder-coated steel construction
Suitable for fridges, tools, storage boxes, and adventure gear
Specifications
Product Code: FSLI002
Overall Dimensions: 793mm L x 535mm W x 85mm H
Closed Dimensions: 793mm L x 533mm W x 85mm H
Open Dimensions: 1529mm L x 533mm W x 85mm H
Internal Dimensions: 735mm L x 460mm W x 64mm H
Weight: 16.4kg
Load Rating: 113kg
Material: Black Powder-Coated Mild Steel
What's Included
1 x Front Runner Cargo Slide
Installation Hardware
Fitting Instructions
Frequently Asked Questions
What fridge sizes will fit the Front Runner FSLI002 Cargo Slide?
The FSLI002 is designed to suit many popular portable fridges in the 40L–52L range. Always verify your fridge dimensions against the tray measurements before purchasing.
Can the Cargo Slide be installed in a canopy, ute tray, or drawer system?
Yes. The slide is designed to mount to most suitable flat surfaces, including canopies, ute trays, Front Runner Drawer Systems, and touring vehicle storage systems.
Does the slide stay open on uneven ground?
Yes. The built-in hold-open mechanism helps prevent the slide from closing unexpectedly when your vehicle is parked on uneven terrain.
FRONT RUNNER Jeep Cherokee Sport Xj Slimline Ii Roof Rack...
$1,933.20
$2,148.00
This 1964mm/77.3" long full-size Slimline II cargo carrying roof rack kit for the Jeep Cherokee Sport XJ contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRJCT02L - Jeep Cherokee Sport XJ Slimline II Roof Rack Kit / Tall
Consisting of:
1x LASS040 - Leg Spacer 10mm (Pair)3x LASS102 - No 2 Leg 130mm (Pair)1x RRSTG10 - SLII Tray - 1345mm(W)X1964mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 30.65kg (67.57lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18"); Length: 1730mm (68"); Height: 140mm (6")
Shipping Weight:
Weight: 35.26kg (78lbs)
FRONT RUNNER Suzuki Jimny (2018-Current) Drop Down Table - TBRA056
$464.40
$516.00
An essential accessory to add to your Front Runner Expander Camping Chair*.
Creates a foldable table on either side of the Expander Chair.
Secures to the frame of the Expander Chair's seat and hooks on the armrest to place your belongings.
Ideal for camping, sports events, the beach, and any other activities.
Once secured the table top folds up with the chair and can be stored together in the Expander Chair Storage Bag .
Features an integrated cut-out to place a glass/wine glass conveniently next to your chair at an easy-to-reach height.
Made from aluminum and high-strength steel and sealed in the same weather-resistant finish as all Front Runner racks.
* The Front Runner Expander Camping Chair is not included and must be purchased separately.
Features
Consists of:
1 x Side Table Top
1 x Table Hinge
1 x Strap
1 x Table Hook
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated aluminium
Black Powder coated high strength steel
Product Dimensions:
190mm (7.5") L x 267mm (11.7") W
Weight:
0.48kg (1.1 lbs)
FRONT RUNNER Toyota Land Cruiser 100 Series Slimsport Rack 40In...
$173.70
$193.00
Light Bar wind fairing for Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Lightbar Ready
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing
Fitment Guide
Installation Hardware
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1286mm (50.6") L x 162mm (6.4") W x 148mm (5.8") H
Weight:
3.14kg (6.9lbs)
FRONT RUNNER Wind Fairing For Low Profile Rack / 1345Mm/1425Mm(W)...
$215.10
$239.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1262mm (49.7") L x 2mm (0.1") W x 127mm (5") H
Weight:
1.6kg (3.5lbs)
FRONT RUNNER Wind Fairing For Rack / 1165Mm/1255Mm(W) - RRAC143
$233.10
$259.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: This Wind Fairing is not suitable for the Toyota Rav4 Adventure Models
Note: LED Light Bar Rack Mount Brackets are not compatible with this Wind Fairing. May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1091mm (43") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.1kg (2.4lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$1,466.10
$1,629.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1165mm/45.9" (W) x 1358mm/53.5" (L)), 2 Tracks, and 4 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*This rack fits a load bed width of 1000mm - 1320mm (39-52") and length of 1270mm - 1550mm (50-61").For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner1 x TRBU001 - Pickup Load Bed Tracks / 1000mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 23kg (51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")Shipping Weight:
Weight 26.8kg (58.9lbs)
FRONT RUNNER Toyota Hilux (2005-2015) Slimline Ii Roof Rack Kit...
$1,388.70
$1,543.00
This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Hilux (2005-2015). Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FATH001 - Toyota Hilux (2005-2015) Foot Rails - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 28.3kg (62.3lbs)
FRONT RUNNER Toyota Hilux (2005-2015) Slimline Ii Roof Rack Kit...
$1,307.70
$1,453.00
This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation.
This 1156mm/45.5" long full size Slimline II cargo carrying roof rack kit for the Toyota Hilux (2005-2015) contains Slimline II Tray, Wind Deflector, 2 Tracks and 4 Feet. This taller kit has space for mounting the Front Runner Camp Tables or other compatible accessories under the rack. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x FASS015 - Foot Set Angled / 75mm - by Front Runner1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.0kg (50.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:26.3kg (58.0lbs)
FRONT RUNNER Toyota Tundra Crew Cab (2022-Current) Slimsport Rack Wind...
$225.90
$251.00
A wind fairing for the Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab Slimsport Rack Wind Fairing
1 x Fitment Guide
1 x Installation Hardware
Materials used:
Black powder coated steel
Product Dimensions:
1460mm (57.5") L x 250mm (9.8") W x 50mm (2") H
Weight:
4.7kg (10.3lbs)
FRONT RUNNER Universal Track Non Drilled / 1800Mm(L) - TRAC010
$251.10
$279.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the T-slot of the track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Suitable for universal fitment of a roof rack should the vehicle roof allow.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double-sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
Consists of:
1 x Pair of tracks
1 x Pair of rubber track liner
Installation Hardware
Fitment Guide
Materials used:
Black powder coated aluminum
Rubber
Product Dimensions:
1800mm (70.9") L x 45mm (1.8") W x 15mm (0.6") H
Weight:
2.6kg (5.7lbs)
FRONT RUNNER Universal Vehicle Ladder / Medium - LADD019
$521.10
$579.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 1060mm 1780mm / 41.7" - 70".
The ladder has 6 steps.
Length from bottom step to top step is 1460mm / 57.5".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Medium
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1485mm / 58.4"
Max 1786mm / 70.3"
Mounting hole centers:
Min 1022mm / 40.2"
Max 1738mm / 68.4"
Mounting surface required:
Min 1060mm / 41.7"
Max 1780mm / 70"
Weight:
7.87Kg (17.4lbs)
FRONT RUNNER Universal Vehicle Ladder / Short - LADD018
$483.30
$537.00
This ladder bolts to the body or to the rear barn doors of vans or utility vehicles.
Surface required to secure the ladder to the vehicle is 770mm 1480mm / 30.3" - 58".
The ladder has 5 steps.
Length from the bottom step to the top step is 1160mm / 45.7"
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Universal Vehicle Ladder / Short
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
Overall Ladder Length:
Min 1180mm / 46.4"
Max 1486mm / 58.5"
Mounting hole centers:
Min 722mm / 28.4"
Max 1438mm / 56.6"
Mounting surface required:
Min 770mm / 30.3"
Max 1480mm / 58"
Weight:
7.25kg (16lbs)
FRONT RUNNER Toyota Land Cruiser 100/Lexus Lx470 Slimline Ii Roof...
$2,114.10
$2,349.00
This 1964mm/77.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota Land Cruiser 100/Lexus LX470. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL029T - Toyota Land Cruiser 100 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL002 - Toyota Land Cruiser 100 Foot Rails - by Front Runner
1 x RRSTG10 - Slimline II Tray - 1345mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.5kg (91.3lbs)
FRONT RUNNER Toyota Land Cruiser 200/Lexus Lx570 Slimline Ii 1/2...
$1,480.50
$1,645.00
This 1156mm/ 45.5" long 1/2 size Slimline II cargo carrying roof rack kit contains a Slimline II Tray, Wind Deflector, and 2 foot rails to mount the Slimline II Tray to your Toyota Land Cruiser 200 or Lexus LX570. It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain Installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller Pro Stainless Steel Prep Table Kit and 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: For fitment to the Lexus LX570, the flush roof rails are required to be removed and the headliner will need to be lowered.
Features
KRTL032T - Toyota Land Cruiser 200 Slimline II 1/2 Roof Rack Kit - by Front Runner
Consisting of:
1 x FATL001 - Toyota Land Cruiser 200 Foot Rails - by Front Runner
1 x RRSTD06 - Slimline II Tray - 1255mm(W) X 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.8kg (72.1lbs)
FRONT RUNNER Toyota Land Cruiser 100 Series Slimsport Roof Rack...
$1,484.10
$1,649.00
This low-profile flat deck Slimsport rack has a load-carrying area of 2280mm (89.8") x 1289mm (50.7").
The sleek side rails have integrated mounting feet. The mounting feet also have additional brace brackets for added strength.
The high-strength aluminum slats have T-slots suitable for all Front Runner top mount accessories.
Easily add on the Slimsport/Slimpro Van Side Mount Accessory Bracket / Small by Front Runner for most Front Runner side mount accessories (sold separately).
Included in the Toyota Land Cruiser 100 Series Slimsport Rack 40" Light Bar Wind Fairing has a 40" cutout to allow the use of the Front Runner 40 LED Slim Light Bar 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount (sold separately).
Fitment guide and all mounting hardware included.
6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).
Note: Drilling required for installation.
Note: Under Rack Tables and some side mount accessories such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets are not compatible with the Slimsport rack kit range.
Features
KSTL003T - Toyota Land Cruiser 100 Series Slimsport Roof Rack Kit / Lightbar Ready
Consisting of:
1x KSTL001 - Toyota Landcruiser 100 series Slimsport Tray
1x RRAC282 - Toyota Lnd Crusr 100 series Slmsprt 40" lgt Bar W
1x RRAC971 - Protection Strip
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 36.99kg (81.55lbs)
Assembled Rack Kit Dimensions:
2280mm (89.8") L x 1289mm (50.7") W x 150mm (5.9") H
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.
Shipping Dimensions:
Width: 325mm (13")
Length: 1700mm (67")
Height: 225mm (9")
Shipping Weight:
Weight: 39kg (86lbs)
FRONT RUNNER Toyota Land Cruiser 80 Load Bar Kit /...
$468.00
$520.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 120mm Gutter Mount legs, 2 1345mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTL037 - Toyota Land Cruiser 80 Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS101 - No 1 Leg 120mm (Pair - by Front Runner
1 x LBSK015 - Roof Load Bar Pair 1345mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 7kg (16lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 115mm (5")
Length 1455mm (57")
Height 180mm (7")
Shipping Weight:
Weight 8.2kg (18.1lbs)
FRONT RUNNER Toyota Tacoma (2005-2023) Slimline Ii Roof Rack Kit...
$1,268.10
$1,409.00
This 1156mm/45.5" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Toyota Tacoma 2005+. Easily installs using the existing factory mounting points. No drilling required. Compatible with "shark fin" antenna.
All Front Runner Rack Kits contain installation instructions, as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: This kit will allow your sunroof to open completely, but it will not allow the sunroof to be operated in tilt/vent mode. If you would like to operate the sunroof in tilt/vent mode, you can use Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit, provided that you do not mount a table underneath.
Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT005T - Toyota Tacoma (2005-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT004 - Toyota Tacoma (2005-Curr) Foot Rails/Low Profile1x RRSTD06 - SLII Tray - 1255mm(W)X1156mm(L)1x WDST010 - Wind Deflector 20mm Lip Narrow Pair /1255mm(W)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 24.51kg (54.04lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 240mm (9")
Shipping Weight:
Weight: 24.53kg (54lbs)
FRONT RUNNER Toyota Tacoma 4Th Gen Double Cab (2024-Current) Slimsport...
$161.10
$179.00
Get your Toyota Tacoma Double Cab ready for camping and overland adventures with the dynamic and functional Slimsport Roof Rack Kit; its clever design allows for the fitment of a 40” lightbar for after-dark adventures, while the included wind fairing will keep the noise levels (and fuel consumption) right down.
Lightbar wind fairing for Toyota Tacoma 4th Gen Double Cab (2024-Current) Slimsport Roof Rack Kit / Lightbar ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Consists of:1 x Wind FairingHardware KitFitment Guide
Materials used:Black powder-coated mild steel
Product Dimensions:75mm (3") L x 1195mm (47.1") W x 200mm (7.9") H
Weight:3.05Kg (6.7lbs)
FRONT RUNNER Ute Slimline Ii Load Bed Rack Kit /...
$2,351.70
$2,613.00
This kit creates a full size rack that sits above your pickup truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm/56.1" (W) x 1964mm/77.3" (L)), 2 Tracks, and 8 Pickup Truck Bed Universal Legs that fit into the Tracks. Drilling may be required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
This rack fits a load bed width of 1495mm - 1575mm (58-62") and length of 2033mm - 2438mm (80-96").
Features
KRLB021T - Pick-Up Truck Slimline II Load Bed Rack Kit / 1425(W) x 1964(L) - by Front Runner
Consisting of:
4 x LASS026 - Universal Load Bed Leg 188mm (Pair) - by Front Runner
1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
1 x TRBU004 - Pick-Up Load Bed Tracks / 1600mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 36kg (78lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 41.3kg (90.9lbs)
FRONT RUNNER Slimline Ii Roof Rack Kit Low Profile Fits...
$1,714.50
$1,905.00
This 1560mm/61.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and 2 Low Profile Foot Rails to mount the Slimline II Tray to your Tundra Crew Max. Drilling is required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: Some side mount accessories are not suited for low-profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.
Features
KRTT008T - Toyota Tundra Crew Max (2022-Current) Slimline II Roof Rack Kit / Low Profile - by Front Runner
Consisting of:
1x FATT009 - Toyota Tundra CrewMax (2022-Current) Low Foot Rail
1x RRSTG08 - SLII Tray - 1345mm(W)X1560mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 33.23kg (73.26lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 440mm (17")
Length: 1730mm (68")
Height: 260mm (10")
Shipping Weight:
Weight: 34kg (75lbs)
FRONT RUNNER Load Bar Kit Gutter Mount Fits Toyota Quantum...
$502.20
$558.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when theres no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 190mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Features
KRTQ004 - Toyota Quantum (2004-2018) Load Bar Kit / Gutter Mount - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LBSK016 - Roof Load Bar Pair 1425mm(W) - by Front Runner
1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicles rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 119mm (5")
Length 1551mm (61")
Height 178mm (7")
Shipping Weight:
Weight 8.9kg (19.7lbs)
FRONT RUNNER Toyota Land Cruiser 60 Slimline Ii Roof Rack...
$2,239.20
$2,488.00
This 2166mm/85.3" long full-size Slimline II cargo carrying roof rack kit for all 60 and 80 series Toyota Land Cruisers contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTL033L - Toyota Land Cruiser 60 Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x LASD103 - No 3 Leg Diagonal 155mm (Pair) - by Front Runner
2 x LASS102 - No 2 Leg 130mm (Pair) - by Front Runner
1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 33kg (73lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 38.6kg (85.0lbs)
FRONT RUNNER Wolf Pack Pro Cargo System Bracket - PBAC001
$149.40
$166.00
Mount or remove your Wolf Pack Pros in seconds from your Pro Bed System or Pro Bed Rack Kit with this specially-designed side-mounting system. These durable brackets will hold your storage bin securely in place through any terrain while giving you easy access to all your adventure gear when you need it.
This Cargo System Bracket secures the Wolf Pack Pro to the side of the Pro Bed System and Pro Bed Rack Kit.
The Wolf Pack Pro is side-mounted, allowing quick and easy access to all your adventure gear while keeping it safe from the elements.
Made of high-strength steel and sealed with the same durable, weather-resistant powder coating as the Front Runner Racks.
The top and bottom latches are lockable with a Rack Accessory Lock / Small, preventing unwanted access.
Features
Consists of:
2 x Mounting Brackets
2 x Latches
Hardware Kit
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
289mm (11.4") L x 486mm (19.1") (W) x 492mm (19.4") H
Weight:
3.66kg (8.07lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
