FRONT RUNNER Land Rover Defender 110 (1983-2016) Sill Protector /...
$197.10
$219.00
Front Runner Land Rover Defender 110 Sill Protector Black - BPLD003
Protect your vehicle's door sills from everyday wear and off-road damage with the Front Runner Sill Protector for the Land Rover Defender 110. Designed specifically for Defender 110 models, these durable aluminium tread plates provide an extra layer of protection against scratches, dents, scuffs, and impacts.
Manufactured from 1.6mm thick aluminium and finished in a tough black powder coating, the sill protectors are built to withstand harsh conditions while complementing the rugged appearance of your Defender. Whether you're frequently entering and exiting the vehicle, loading equipment, or tackling challenging terrain, these protectors help preserve your vehicle's bodywork and maintain its appearance.
Key Features
Designed specifically for Land Rover Defender 110 models (1983–2016).
Provides added protection for vehicle door sills and corners.
Manufactured from durable 1.6mm thick aluminium tread plate.
Black powder-coated finish for enhanced durability and corrosion resistance.
Helps prevent dents, scratches, scuffs, and impact damage.
Enhances the rugged appearance of the vehicle.
Built to withstand demanding off-road and touring conditions.
Benefits
Protects vulnerable sill areas from everyday wear and tear.
Reduces the risk of costly bodywork repairs.
Maintains the appearance and value of your vehicle.
Provides long-lasting protection in harsh environments.
Complements the Defender's rugged styling.
Construction
Material: 1.6mm thick aluminium tread plate.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Compatibility
Suitable for Land Rover Defender 110 models (1983–2016).
Engineered for a precise vehicle-specific fit.
Important Information
Designed specifically for Defender 110 models.
Please verify vehicle compatibility before purchase.
Professional installation is recommended if required.
FRONT RUNNER Hi-Lift Jack Base Plate - JADA004
$112.50
$125.00
Front Runner Hi-Lift Jack Base Plate - JADA004
Improve the safety and stability of your vehicle recoveries with the Front Runner Hi-Lift Jack Base Plate. Designed to provide a solid foundation for your Hi-Lift jack, this essential recovery accessory helps prevent the jack from sinking into soft ground such as sand, mud, gravel, and other unstable surfaces.
Constructed from durable high-density polyethylene (HDPE), the base plate offers exceptional strength while remaining lightweight and easy to carry. Its textured surface enhances grip between the jack and the plate, helping to maintain stability and reduce movement during lifting operations.
Compact and easy to store in your vehicle, the Hi-Lift Jack Base Plate is an essential addition to any recovery kit, providing increased confidence and safety when tackling challenging off-road terrain.
Key Features
Provides a stable foundation for Hi-Lift jacks on soft or uneven terrain.
Helps prevent the jack from sinking into sand, mud, gravel, and loose surfaces.
Manufactured from durable high-density polyethylene (HDPE).
Textured surface improves grip and stability during lifting.
Lightweight design for easy transport and handling.
Compact size allows convenient storage in your vehicle.
Resistant to cracking, warping, and harsh outdoor conditions.
Ideal for off-road recovery and remote area travel.
Benefits
Improves safety when using a Hi-Lift jack on unstable ground.
Distributes weight over a larger surface area to reduce sinking.
Enhances lifting stability and confidence during vehicle recovery.
Provides reliable performance in a variety of off-road environments.
Easy to carry and store without taking up significant space.
Construction
Material: High-density polyethylene (HDPE).
Strong, lightweight, and weather-resistant.
Designed to withstand demanding off-road conditions.
Ideal Applications
4WD and off-road vehicle recovery.
Sand, mud, gravel, and uneven terrain.
Touring, overlanding, camping, and remote area travel.
Important Information
Designed for use with Hi-Lift jacks.
Always follow the jack manufacturer's safety guidelines during use.
Inspect the base plate regularly for damage before use.
FRONT RUNNER Hi-Lift Jack Bracket - JADA010
$184.50
$205.00
Front Runner Hi-Lift Jack Side Mount Brackets for Slimline II Roof Racks
Keep your recovery gear secure and easily accessible with the Front Runner Hi-Lift Jack Side Mount Brackets. Designed specifically for the Front Runner Slimline II Roof Rack, these heavy-duty brackets allow you to mount a Hi-Lift Jack neatly along the side rails of your rack, maximizing cargo space while keeping essential recovery equipment within reach.
Constructed from heavy-gauge steel and finished with Front Runner's durable weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of off-road use. The two-piece design securely holds both the jack base and handle, helping prevent movement and rattling during travel.
For added security, the handle bracket is lockable using a small wire lock such as the Master Lock Luggage Lock Model 4688D, helping protect your Hi-Lift Jack from theft while parked or travelling.
Key Features
Designed for mounting Hi-Lift Jacks to the side rails of Front Runner Slimline II Roof Racks.
Fits all Hi-Lift Jack sizes.
Heavy-gauge steel construction for maximum strength and durability.
Weather-resistant black powder-coated finish.
Two-piece bracket system secures both the jack handle and base.
Lockable design for added security.
Helps prevent movement, rattling, and wear during travel.
Easy bolt-on installation.
Benefits
Keeps your Hi-Lift Jack secure and readily accessible.
Frees up valuable cargo space inside your vehicle.
Provides a clean and organised roof rack setup.
Offers additional theft protection when used with a compatible lock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Compatible with Front Runner Slimline II Roof Racks.
Works with small wire locks such as the Master Lock Luggage Lock Model 4688D.
Not compatible with the Front Runner Slimsport Rack Kit range.
Construction
Material: Heavy-gauge steel.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Important Information
Hi-Lift Jack and lock sold separately.
Designed specifically for Front Runner Slimline II Roof Rack systems.
Not compatible with Front Runner Slimsport Rack Kits.
FRONT RUNNER Hi-Lift Jack Bracket / Top Mount - JADA014
$163.80
$182.00
Front Runner Hi-Lift Jack Roof Rack Mount Brackets
Securely mount your Hi-Lift Jack to your Front Runner Roof Rack with these purpose-built Hi-Lift Jack Mount Brackets. Designed to bolt directly into the T-slots of Front Runner rack systems, these brackets provide a strong, reliable, and easily accessible storage solution for your recovery jack.
The two-piece bracket system accommodates all sizes of Hi-Lift Jacks and keeps them securely mounted during both on-road and off-road travel. The innovative handle bracket opens for quick access when needed, while the lockable design provides added security when paired with the optional RRAC134 lock.
Manufactured from durable steel and finished with Front Runner's weather-resistant black powder coating, these brackets are built to withstand harsh outdoor conditions and years of adventure.
Key Features
Designed to mount Hi-Lift Jacks directly to Front Runner Roof Racks.
Bolts securely into the rack's T-slot system.
Compatible with all Hi-Lift Jack sizes.
Two-piece bracket design for secure retention.
Opening handle bracket allows easy access to the jack.
Lockable handle bracket for added security.
Compatible with the Front Runner RRAC134 lock.
Durable steel construction with black powder-coated finish.
Benefits
Keeps your Hi-Lift Jack securely mounted and readily accessible.
Maximises storage space on your vehicle.
Reduces movement and vibration during travel.
Provides added theft protection when used with a compatible lock.
Built to withstand harsh off-road and weather conditions.
Compatibility
Suitable for all Hi-Lift Jack sizes.
Designed for Front Runner Roof Rack systems with T-slot channels.
Compatible with RRAC134 lock for additional security.
Construction
Material: Steel.
Finish: Black powder-coated.
Weather-resistant and corrosion-resistant construction.
Important Information
Hi-Lift Jack sold separately.
RRAC134 lock sold separately.
Ensure all mounting hardware is properly tightened before use.
FRONT RUNNER Land Rover Defender (1983-2016) Rear Bumper Bracket For...
$125.10
$139.00
Front Runner Hi-Lift Jack Rear Bumper Mount for Land Rover Defender
Carry your Hi-Lift Jack securely without the need for a roof rack using the Front Runner Hi-Lift Jack Rear Bumper Mount. Specifically designed for the Land Rover Defender, this rugged mounting solution allows you to store your jack conveniently on the rear bumper for quick access when recovery situations arise.
Constructed from black powder-coated high-strength steel, this durable two-piece bracket is engineered to withstand harsh weather conditions, rough tracks, and demanding off-road use. The rear bumper mounting position provides easy access to your Hi-Lift Jack without the need to climb onto your vehicle, making recovery equipment more accessible when you need it most.
In addition to its practical functionality, this bumper mount adds a distinctive off-road appearance to your Defender, enhancing both style and capability.
Key Features
Designed specifically for Land Rover Defender vehicles.
Securely mounts a 1.2m Hi-Lift Jack to the rear bumper.
Heavy-duty two-piece mounting bracket design.
Manufactured from high-strength steel.
Black powder-coated finish for corrosion resistance.
Lockable design for added security.
Provides quick and easy access to your recovery jack.
Enhances the rugged appearance of your Defender.
Benefits
Eliminates the need for roof rack-mounted jack storage.
Keeps recovery equipment easily accessible.
Protects your jack during off-road travel.
Offers a secure and convenient mounting solution.
Adds a functional off-road aesthetic to your vehicle.
Compatibility
Suitable for Land Rover Defender models.
Designed to carry one 1.2m Hi-Lift Jack.
Compatible with user-supplied padlocks for added security.
Construction
Material: High-strength steel.
Finish: Black powder-coated.
Built for long-term durability and outdoor use.
Important Information
Hi-Lift Jack sold separately.
Padlock not included.
Professional installation is recommended if you are unfamiliar with vehicle accessory fitting.
FRONT RUNNER Double Jerry Can Holder Replacement Strap - JCHO015
$106.20
$118.00
Front Runner Replacement Top Strap for Jerry Can Holder
Restore the security and functionality of your Front Runner Jerry Can Holder with this replacement top strap. Designed specifically as a replacement for the JCHO014 Jerry Can Holder, this heavy-duty strap securely fastens your jerry cans in place, helping eliminate rattling, movement, and wear during both on-road and off-road travel.
Constructed from black powder-coated stainless steel, the strap is built to withstand harsh environments while providing long-lasting corrosion resistance. The integrated stainless steel cross brace and safety catch ensure your fuel containers remain firmly secured, while the strap design covers the jerry can caps for added security.
Key Features
Replacement top strap designed for the Front Runner JCHO014 Jerry Can Holder.
Securely fastens jerry cans to minimise movement and vibration.
Helps eliminate rattling and wear during travel.
Features a durable stainless steel cross brace.
Integrated safety catch for enhanced security.
Strap covers the jerry can caps for additional protection.
Compatible with padlocks for theft deterrence.
Manufactured from black powder-coated stainless steel.
Benefits
Provides a secure, no-rattle mounting solution.
Helps protect jerry cans from damage caused by movement.
Offers added security when used with a compatible padlock.
Built to withstand demanding off-road and touring conditions.
Compatibility
Designed specifically as a replacement for the Front Runner JCHO014 Jerry Can Holder.
Compatible with optional padlocks, including RRAC134.
Important Information
This product includes the replacement top strap only.
Jerry can holder, jerry cans, and padlock are sold separately.
Ensure proper installation before use.
Construction
Material: Black powder-coated stainless steel.
Corrosion-resistant finish for long-term durability.
Designed for rugged touring and off-road applications.
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$960.30
$1,067.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45. 9'' (W) x 752mm/29. 6'' (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29. 5'' long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,343.60
$2,604.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1165mm/45. 9'' (W) x 2570mm/101. 2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45. 3 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,021.40
$2,246.00
Front Runner Slimline II Roof Rack Kit for Canopies & Trailers
Take your storage capacity to the next level with the Front Runner Slimline II Roof Rack Kit. Designed for truck canopies, camper shells, caps, and trailers fitted with OEM or factory-installed tracks, this premium rack system provides a durable and versatile platform for carrying camping gear, recovery equipment, rooftop accessories, and more.
The kit includes the renowned Slimline II Tray and eight (8) mounting feet, creating a secure mounting solution for roof tops measuring up to approximately 1165mm (W) x 2570mm (L). Its elevated design also provides additional clearance beneath the rack, allowing compatible accessories such as Front Runner tables to be mounted underneath.
Key Features
Complete Slimline II Roof Rack Kit for canopies, camper shells, caps, and trailers.
Includes Slimline II Tray and eight (8) mounting feet.
Designed to mount directly to OEM or factory-installed roof tracks.
Suitable for roof top sizes up to approximately 1165mm x 2570mm.
Raised mounting design provides space for mounting compatible accessories beneath the rack.
Strong yet lightweight construction for touring, overlanding, and everyday use.
Supplied with installation instructions and all required mounting components.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
To ensure proper installation using the supplied Front Runner feet and hardware, the factory-installed canopy track must meet the following specifications:
Slot Base Width: 20mm minimum / 25mm maximum
Slot Base Height: 6.5mm minimum / 10mm maximum
Slot Opening Width: 8.5mm minimum / 10.5mm maximum
Slot Opening Height: 2mm minimum / 5mm maximum
Important Information
Additional fasteners may be required depending on your OEM or factory-supplied track system.
Please consult your canopy manufacturer regarding the load capacity of your canopy and track before installation.
Always ensure loads are secured and do not exceed the manufacturer's recommended limits.
What's Included
Front Runner Slimline II Tray
Eight (8) Front Runner Mounting Feet
Installation Hardware
Installation Instructions
Warranty
All Front Runner Roof Rack Kits are backed by a Limited Lifetime Warranty, ensuring long-lasting performance and reliability wherever your adventures take you.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,138.40
$2,376.00
Front Runner Slimline II Roof Rack Kit for Canopies & Trailers
Expand your storage capacity and prepare for any adventure with the Front Runner Slimline II Roof Rack Kit. Designed specifically for truck canopies, camper shells, caps, and trailers fitted with OEM or factory-installed tracks, this complete rack system provides a strong, versatile platform for transporting gear, recovery equipment, rooftop tents, and outdoor accessories.
Featuring the premium Slimline II Tray and eight (8) mounting feet, this rack is suitable for roof top sizes up to approximately 1165mm (W) x 2772mm (L). The elevated mounting design also provides additional clearance for mounting Front Runner tables and other compatible accessories beneath the rack, maximizing your available storage space.
Key Features
Complete Slimline II Roof Rack Kit for canopies, camper shells, caps, and trailers.
Includes Slimline II Tray and eight (8) mounting feet.
Mounts directly to OEM or factory-installed canopy tracks.
Suitable for roof top dimensions up to approximately 1165mm x 2772mm.
Raised design allows compatible accessories to be mounted underneath the rack.
Strong yet lightweight construction for touring, overlanding, and work applications.
Includes installation instructions and mounting hardware.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
For the supplied Front Runner feet and hardware to fit correctly, the factory-installed canopy track must meet the following specifications:
Slot Base Width: 20mm minimum / 25mm maximum
Slot Base Height: 6.5mm minimum / 10mm maximum
Slot Opening Width: 8.5mm minimum / 10.5mm maximum
Slot Opening Height: 2mm minimum / 5mm maximum
Important Information
Additional fasteners may be required depending on the design of your OEM or factory-supplied track system.
Please consult your canopy manufacturer regarding the load rating of your canopy and track system before installation.
Always ensure all cargo is properly secured and does not exceed manufacturer load limits.
What's Included
Front Runner Slimline II Tray
Eight (8) Front Runner Mounting Feet
Installation Hardware
Installation Instructions
Warranty
All Front Runner Roof Rack Kits are backed by a Limited Lifetime Warranty, providing long-term reliability and peace of mind for every journey.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,572.30
$1,747.00
Front Runner Slimline II Roof Rack Kit for Canopies & Trailers
Maximise your canopy, camper shell, cap, or trailer storage capacity with the Front Runner Slimline II Roof Rack Kit. Designed to fit vehicles with OEM or factory-installed tracks, this premium rack system provides a secure and versatile platform for transporting camping gear, recovery equipment, rooftop accessories, and more.
This kit includes the renowned Slimline II Tray and six (6) mounting feet, creating a durable and reliable roof storage solution for roof tops measuring up to approximately 1255mm (W) x 1762mm (L). The elevated rack design also allows for compatible accessories, such as Front Runner tables, to be mounted beneath the rack for additional convenience and storage efficiency.
Key Features
Complete Slimline II Roof Rack Kit for canopies, camper shells, caps, and trailers.
Includes Slimline II Tray and six (6) mounting feet.
Designed to mount directly onto OEM or factory-installed roof tracks.
Raised mounting design provides clearance for Front Runner tables and compatible accessories.
Strong, lightweight construction built for touring, work, and adventure applications.
Suitable for roof top sizes up to approximately 1255mm x 1762mm.
Supplied with all required rack components and installation instructions.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
To ensure proper installation using the supplied Front Runner feet and hardware, your factory-installed canopy track must meet the following specifications:
Slot Base Width: 20mm minimum / 25mm maximum
Slot Base Height: 6.5mm minimum / 10mm maximum
Slot Opening Width: 8.5mm minimum / 10.5mm maximum
Slot Opening Height: 2mm minimum / 5mm maximum
Important Information
Additional fasteners may be required depending on your OEM or factory-supplied track system.
Please consult your canopy manufacturer regarding the maximum load capacity of your canopy and track system before installation.
Always ensure loads are secured according to manufacturer recommendations.
What's Included
Front Runner Slimline II Tray
Six (6) Front Runner Mounting Feet
Installation Hardware
Installation Instructions
Warranty
All Front Runner Roof Rack Kits are backed by a Limited Lifetime Warranty for long-term confidence and reliability.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,877.40
$2,086.00
Front Runner Slimline II Rack Kit for Canopies, Camper Shells & Trailers
The Front Runner Slimline II Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof dimensions up to approximately 125.5 cm (W) x 216.6 cm (L). This complete rack solution provides a strong, versatile platform for carrying camping equipment, recovery gear, tools, and other adventure essentials.
The kit includes a Slimline II Tray and eight (8) mounting feet that attach directly to compatible OEM or factory-installed roof tracks. The elevated design creates additional clearance beneath the rack, making it ideal for mounting Front Runner tables and other compatible accessories underneath for improved storage efficiency.
Engineered for durability and off-road performance, the Slimline II Rack Kit includes all necessary mounting hardware and installation instructions for a straightforward fitment process.
Features
Designed for truck canopies, camper shells, caps, and trailers.
Suitable for roof sizes up to approximately 125.5 cm (W) x 216.6 cm (L).
Includes Slimline II Tray and eight (8) mounting feet.
Mounts directly to compatible OEM or factory-installed roof tracks.
Raised design provides clearance for mounting tables and accessories beneath the rack.
Strong, lightweight, and durable construction.
Compatible with a wide range of Front Runner rack accessories.
Includes installation hardware and fitment instructions.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
To ensure compatibility with Front Runner mounting feet and supplied hardware, the factory roof track must meet the following specifications:
Track Slot Base Width: 2.0 cm – 2.5 cm
Track Slot Base Height: 0.65 cm – 1.0 cm
Track Slot Opening Width: 0.85 cm – 1.05 cm
Track Slot Opening Height: 0.2 cm – 0.5 cm
What's Included
1 x Front Runner Slimline II Tray
8 x Mounting Feet
Installation Hardware
Fitment Instructions
Important Notes
Additional fasteners may be required depending on the OEM or factory-installed roof track system.
Please consult your canopy, camper shell, cap, or trailer manufacturer regarding the load ratings of your specific roof and track system before installation.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$901.80
$1,002.00
Front Runner Slimline II Rack Kit for Canopies, Camper Shells & Trailers
The Front Runner Slimline II Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof dimensions up to approximately 134.5 cm (W) x 75.2 cm (L). This compact and durable rack system provides a secure platform for carrying camping equipment, tools, recovery gear, and other essential cargo.
The kit includes a Slimline II Tray and four (4) mounting feet that attach directly to compatible OEM or factory-installed roof tracks. Its low-profile design maximizes load-carrying capability while maintaining excellent vehicle clearance and functionality.
Designed for durability and versatility, this rack kit includes all required mounting hardware and detailed installation instructions for a straightforward installation.
Features
Designed for truck canopies, camper shells, caps, and trailers.
Suitable for roof sizes up to approximately 134.5 cm (W) x 75.2 cm (L).
Includes Slimline II Tray and four (4) mounting feet.
Mounts directly to compatible OEM or factory-installed roof tracks.
Strong, lightweight, and durable construction.
Compatible with a wide range of Front Runner rack accessories.
Includes installation hardware and fitment instructions.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
To ensure compatibility with Front Runner mounting feet and supplied hardware, the factory roof track must meet the following specifications:
Track Slot Base Width: 2.0 cm – 2.5 cm
Track Slot Base Height: 0.65 cm – 1.0 cm
Track Slot Opening Width: 0.85 cm – 1.05 cm
Track Slot Opening Height: 0.2 cm – 0.5 cm
What's Included
1 x Front Runner Slimline II Tray
4 x Mounting Feet
Installation Hardware
Fitment Instructions
Important Notes
Additional fasteners may be required depending on the OEM or factory-installed roof track system.
Please consult your canopy, camper shell, cap, or trailer manufacturer regarding the load ratings of your specific roof and track system before installation.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,033.20
$1,148.00
Front Runner Slimline II Rack Kit for Canopies, Camper Shells & Trailers
The Front Runner Slimline II Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof dimensions up to approximately 134.5 cm (W) x 95.4 cm (L). This complete rack solution provides a strong, low-profile platform for carrying camping gear, recovery equipment, tools, and other adventure essentials.
The kit includes a Slimline II Tray and four (4) mounting feet that attach directly to compatible OEM or factory-installed roof tracks. Its elevated design provides additional clearance beneath the rack, allowing compatible accessories such as Front Runner tables to be mounted underneath for efficient use of space.
Built for durability and versatility, the Slimline II Rack Kit includes all required mounting hardware and installation instructions for a straightforward installation.
Features
Designed for truck canopies, camper shells, caps, and trailers.
Suitable for roof sizes up to approximately 134.5 cm (W) x 95.4 cm (L).
Includes Slimline II Tray and four (4) mounting feet.
Mounts directly to compatible OEM or factory-installed roof tracks.
Provides additional clearance for mounting tables and accessories beneath the rack.
Strong, lightweight, and durable construction.
Compatible with a wide range of Front Runner rack accessories.
Includes installation hardware and fitment instructions.
Backed by Front Runner's Limited Lifetime Warranty.
Track Compatibility Requirements
To ensure compatibility with Front Runner mounting feet and supplied hardware, the factory roof track must meet the following specifications:
Track Slot Base Width: 2.0 cm – 2.5 cm
Track Slot Base Height: 0.65 cm – 1.0 cm
Track Slot Opening Width: 0.85 cm – 1.05 cm
Track Slot Opening Height: 0.2 cm – 0.5 cm
What's Included
1 x Front Runner Slimline II Tray
4 x Mounting Feet
Installation Hardware
Fitment Instructions
Important Notes
Additional fasteners may be required depending on the OEM or factory-installed roof track system.
Please consult your canopy, camper shell, cap, or trailer manufacturer regarding the load ratings of your specific roof and track system before installation.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,953.00
$2,170.00
The Front Runner Slimline II Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof dimensions of up to approximately 134.5 cm (W) x 216.6 cm (L). This complete rack solution mounts directly to OEM or factory-installed roof tracks using the included eight (8) mounting feet, providing a secure and versatile platform for transporting gear, camping equipment, recovery accessories, and more.
The elevated rack design offers additional clearance beneath the tray, making it ideal for mounting Front Runner tables and other compatible accessories underneath the rack. Built for durability and adventure, the Slimline II Rack Kit delivers a low-profile yet highly capable load-carrying solution for both on-road and off-road applications.
All Front Runner Rack Kits include detailed installation instructions and the components required to mount the Slimline II Tray to your vehicle.
Features
Suitable for truck canopies, camper shells, caps, and trailers.
Designed for roof sizes up to approximately 134.5 cm (W) x 216.6 cm (L).
Includes Slimline II Tray and eight (8) mounting feet.
Mounts directly to OEM/factory-installed roof tracks.
Raised design provides clearance for mounting tables and accessories beneath the rack.
Strong, lightweight, and durable construction.
Compatible with a wide range of Front Runner accessories.
Includes installation instructions and mounting hardware.
Backed by Front Runner's Limited Lifetime Warranty.
Important Fitment Requirements
Additional fasteners may be required depending on the OEM or factory-installed roof track system.
For compatibility with Front Runner mounting feet and supplied hardware, the factory roof track must meet the following specifications:
Track Slot Base Width: 2.0 cm – 2.5 cm
Track Slot Base Height: 0.65 cm – 1.0 cm
Track Slot Opening Width: 0.85 cm – 1.05 cm
Track Slot Opening Height: 0.2 cm – 0.5 cm
What's Included
1 x Front Runner Slimline II Tray
8 x Mounting Feet
Installation Hardware
Fitment Instructions
Important Note
Please consult your canopy, camper shell, or trailer manufacturer regarding the load ratings of your specific canopy and roof track system before installation.
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,322.00
$2,580.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53'' (W) x 2368mm/93. 2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 750mm/29. 5 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details. This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,079.00
$2,310.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 2368mm/93.2" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT49TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1345mm(W) X 2368mm(L) - by Front Runner
Consisting of
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTG12 - Slimline II Tray - 1345mm(W) X 2368mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1345mm (53")Length 2368mm (93")Height 70mm (3")Shipping Weight:
Weight 37.5kg (82.6lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,366.10
$2,629.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 2570mm/101.2" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT50TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1345mm(W) X 2570mm(L) - by Front RunnerConsisting of:4x FASS025 - Foot Set / 70mm - 80mm1x RRSTG13 - SLII Tray - 1345mm(W)X2570mm(L)1x TRCA003 - Canopy Tracks / 1150mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 40.49kg (89.27lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 42kg (92lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,492.10
$2,769.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1345mm/53" (W) x 2772mm/109.1" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT51TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1345mm(W) X 2772mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTG14 - Slimline II Tray - 1345mm(W) X 2772mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 36kg (79lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1345mm (53")Length 2772mm (109")Height 70mm (3")
Shipping Weight:
Weight 41.7kg (91.8lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,059.30
$1,177.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 752mm/29.6" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 750mm/29.6” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
KRCAT53T - Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1425mm(W) X 752mm(L) - by Front RunnerConsisting of:2x FASS025 - Foot Set / 70mm - 80mm1x RRSTJ04 - SLII Tray - 1425mm(W)X752mm(L)1x TRCA005 - Canopy Tracks / 750mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 18.61kg (41.03lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 270mm (11")Shipping Weight:Weight: 23kg (51lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,213.20
$1,348.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1156mm/45.5" (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT54TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1156mm(L) - by Front Runner
Consisting of:
2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ06 - Slimline II Tray - 1425mm(W) x 1156mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 21kg (45lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 1156mm (46")Height 70mm (3")
Shipping Weight:
Weight 23.9kg (52.6lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,410.30
$1,567.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1358mm/53.5" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT55TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1358mm(L) - by Front Runner
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 23kg (51lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 1358mm (53")Height 70mm (3")
Shipping Weight:
Weight 26.8kg (59.0lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,521.90
$1,691.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1560mm/61.4" (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ08 - Slimline II Tray - 1425mm(W) X 1560mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 25kg (55lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 1560mm (61")Height 70mm (3")Shipping Weight:
Weight 29.0kg (63.8lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,890.00
$2,100.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1964mm/77.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT58TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 1964mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ10 - Slimline II Tray - 1425mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 30kg (66lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 1964mm (77")Height 70mm (3")Shipping Weight:
Weight 34.8kg (76.5lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,034.00
$2,260.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2166mm/85.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT59TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 2166mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ11 - Slimline II Tray - 1425mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 32kg (70lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 2166mm (85")Height 70mm (3")
Shipping Weight:
Weight 37.0kg (81.3lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,165.40
$2,406.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2368mm/93.2" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,300.40
$2,556.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2570mm/101.2" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT61TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1425mm(W) X 2570mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ13 - Slimline II Tray - 1425mm(W) X 2570mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 36kg (79lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1425mm (56")Length 2570mm (101")Height 70mm (3")
Shipping Weight:
Weight 41.7kg (91.7lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,752.20
$3,058.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 2772mm/109.1" (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide in to the supplied Track. The 2 x 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
KRCAT62T - Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1425mm(W) X 2772mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTJ14 - Slimline II Tray - 1425mm(W) X 2772mm(L) - by Front Runner2 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 42kg (91lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1425mm (56")Length 2772mm (109")Height 70mm (3")
Shipping Weight:
Weight 48.3kg (106.2lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$964.80
$1,072.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 752mm/29.6" (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT63TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1475mm(W) X 752mm(L) - by Front Runner
Consisting of:
2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM04 - Slimline II Tray - 1475mm(W) x 752mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 17kg (38lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 752mm (30")Height 70mm (3")
Shipping Weight:
Weight 19.9kg (43.8lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,099.80
$1,222.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 954mm/37.6" (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT64TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1475mm(W) X 954mm(L) - by Front Runner
Consisting of:
2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM05 - Slimline II Tray - 1475mm(W) x 954mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 19kg (41lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 954mm (38")Height 70mm (3")Shipping Weight:
Weight 21.8kg (48.0lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,401.30
$1,557.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1156mm/45.5" (L). The Slimline II Tray mounts to four (4) supplied Feet that slide in to the supplied Track. The 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
KRCAT65T - Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1475mm(W) X 1156mm(L) - by Front Runner
Consisting of:
2 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM06 - Slimline II Tray - 1475mm(W) x 1156mm(L) - by Front Runner1 x TRCA003 - Canopy Tracks / 1150mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 23kg (50lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1475mm (58")Length 1156mm (46")Height 70mm (3")
Shipping Weight:
Weight 26.5kg (58.2lbs)
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,570.50
$1,745.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to six (6) supplied Feet that slide in to the supplied Track. The 3 x 140mm/5.5" long pair of tracks can be easily mounted to your canopy/shell or trailer.See the Track installation instructions in the INSTALL tab for further details.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.
KRCAT66T - Truck Canopy or Trailer Slimline II Rack Kit / Tall / 1475mm(W) X 1358mm(L) - by Front Runner
Consisting of:
3 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM07 - Slimline II Tray - 1475mm(W) X 1358mm(L) - by Front Runner3 x TRCA008 - Universal 140mm Tracks - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 24kg (54lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 1475mm (58")Length 1358mm (53")Height 70mm (3")
Shipping Weight:
Weight 28.5kg (62.7lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,935.00
$2,150.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 1964mm/77.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT69TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1475mm(W) X 1964mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM10 - Slimline II Tray - 1475mm(W) X 1964mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 30kg (67lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 1964mm (77")Height 70mm (3")Shipping Weight:
Weight 35.2kg (77.4lbs)
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,084.40
$2,316.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1" (W) x 2166mm/85.3" (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.This taller kit has space for mounting the Front Runner tables or other compatible accessories under the rack.NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCAT70TN - Truck Canopy or Trailer with OEM Track Slimline II Rack Kit / Tall / 1475mm(W) X 2166mm(L) - by Front Runner
Consisting of:
4 x FASS025 - Foot Set / 70mm-80mm - by Front Runner1 x RRSTM11 - Slimline II Tray - 1475mm(W) X 2166mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 32kg (71lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 1475mm (58")Length 2166mm (85")Height 70mm (3")
Shipping Weight:
Weight 37.4kg (82.3lbs)
FRONT RUNNER Dodge Ram Mega Cab 2-Door Ute (2002-2008) Slimline...
$1,764.00
$1,960.00
This kit creates a full size rack that sits above your Dodge Ram Mega Cab's 2002-2008 truck bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1358mm), 2 Tracks, and 4 Ute Bed Universal Legs that fit into the Tracks. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Drilling may be required to mount the track to the bed of your truck. See the track and leg installation instructions in the INSTALL tab for further details.
KRDR003T - Ram Mega Cab 4-door (2002-2008) Slimline II Load Bed Rack Kit - by Front RunnerConsisting of:3x LASS026 - Universal Load Bed Leg / Tall (Pair)1x RRSTM07 - SLII Tray - 1475mm(W)X1358mm(L)1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steelApproximate Installed Weight: 31.9kg (70.33lbs)The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 450mm (18")Length: 1730mm (68")Height: 140mm (6")Shipping Weight:Weight: 31.62kg (70lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,930.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,679.91
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,309.87
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,789.91
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
