FRONT RUNNER Ram Pro Master 3500 (136 Wb/High Roof) (2014-Current)...
$2,173.50
$2,415.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1345mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXG003 - Expedition Rail Kit - Front or Back -1345mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mmMaterial Used:Black epoxy powder - coated T6 aluminiumHigh strength steelProduct Dimensions:1358mm (53.5") L x 1345mm (53") W x 63mm (2.5") H Weight:4.38 kg (9.7 lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2569Mm (L)...
$283.50
$315.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2569mm / 101.1".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2417mm (95.2") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
4.58kg (10.1lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3579Mm (L)...
$333.90
$371.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3579mm / 140.9".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3206mm (126.22") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.64kg (12.4lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 3927Mm (L)...
$419.40
$466.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 3927mm / 154.6" to 4129mm / 162.6".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
12x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
10x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
3782mm (148.9") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
6.59kg (l14.5bs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2973Mm (L)...
$327.60
$364.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2973mm / 117".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
10x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
8x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2649mm (104.3") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
5.05kg (11.1lbs)
FRONT RUNNER Ram Pro Master 3500 (159 Wb/Ext High Roof)...
$2,837.70
$3,153.00
Effortlessly convert your Slimline II Roof Rack to an expedition style rack with the new Expedition Perimeter Rail Kit. This kit includes all hardware and components needed to fit rails to each length of the 1358mm long x 1425mm wide Front Runner Slimline II Roof Rack. The modular bolt-on design allows you to remove rail components whenever needed, such as to mount a roof top tent.
Convert your Front Runner Slimline II Roof Rack at any time to a classic looking safari style basket shaped roof rack.
No drilling is required for installation, and the kit adds extra cargo support with an attractive, low-profile design.
Mounting hardware is included, and the rails are powder-coated with the same durable, weather-resistant finish as the Slimline II Roof Rack.
The Expedition Rails add 63mm / 2.5" to the height of the roof rack and are manufactured with corrosion-resistant, high-density aluminum components.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x KRXJ003 - Expedition Rail Kit - Front or Back -1425mm(W)1x KRXS007 - Expedition Rail Kit - Sides - 752mm to 1358mm
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Product Dimensions:1358mm (53.5") L x 1425mm (56.1") W x 63mm (2.5") H
Weight:4.5 kg (9.9 lbs)
FRONT RUNNER Toyota Tacoma 3Rd Gen Double Cab 5' (2016-2023)...
$1,156.50
$1,285.00
This tough, lightweight steel and aluminum system secures to the load bed of your Toyota Tacoma Double Cab, thereby hugely increasing its gear-carrying capacity. This Pro Bed System is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. With this cargo-carrying system, you can carry all the gear you need for any adventure.
This Pro Bed System is specifically designed to fit the Toyota Tacoma Double Cab load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the Toyota Tacoma Double Cab with specific mounting brackets. Drilling is required to for fitment.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Pro Bed Tailgate Net.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBTT001S - Toyota Tacoma Double Cab 5' (2005-Current) Pro Bed System
Consisting of:
1x PBAL1250 - Pro Bed Rack Aluminium Extrusions / Medium
1x PBRA001 - Pro Bed Rack Universal Structural Components
1x PBTT001 - Toyota Tacoma Pro Bed Rack Mounting System
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 51.4kg (113.32lbs)
Shipping Dimensions:
Width: 645mm (25")
Length: 1280mm (50")
Height: 340mm (13")
Shipping Weight:
Weight: 55kg (121lbs)
FRONT RUNNER Ram 1500 (5Th Gen) 4 Door Crew Cab...
$1,288.80
$1,432.00
This tough, lightweight steel and aluminum system secures to the bed of your Ram, thereby hugely increasing its gear-carrying capacity. This Pro Bed system is designed to fit a Front Runner rack and several accessories to its sides. These include molle panels, storage boxes or recovery tracks. It allows you to pack all the overland, camping or sports gear you may need.
This Pro Bed System is specifically designed to fit the RAM 1500 (5Gen) 4 Door Crew Cab 5.7' load bed.
This System provides the frame to customize your Load Bed storage configuration.
Secures Pro Bed accessories, Wolf Pack Pro Cargo System Bracket, Pro Bed Rack Headache Molle Panel and a Pro Bed Universal Accessory Mount and is designed to mount a full Roof Rack and to haul more gear above it.
Secures to the load bed of the RAM 1500 (5Gen) 4 Door Crew Cab 5.7' with specific mounting brackets.
Made of steel and is black powder-coated in the same durable and corrosion resistant coating as the Front Runner racks.
The Pro Bed System have integrated hooks for more accessories such as the Dynamic Pro Bed Tailgate Net.
Drilling is required for fitment.
For further information on installation, please see the fitment instructions in the INSTALL tab.
Features
PBDR001S - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box (2019-Current) Pro Bed System
Consisting of:
1x PBAL1450 - Pro Bed Rack Aluminium Extrusions / Large
1x PBDR001 - RAM 1500 (5th Gen) 4 Door Crew Cab 5'7" Box (2019-Current)
1x PBRA001 - Pro Bed Rack Universal Structural Components
Material Used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 53.13kg (117.13lbs)
Shipping Dimensions:
Width: 425mm (17")
Length: 1490mm (59")
Height: 615mm (24")
Shipping Weight:
Weight: 55kg (121lbs)
FRONT RUNNER Isuzu D-Max (2012-Current) Egr Rolltrac Load Bed Load...
$546.30
$607.00
Clear your bed space and still haul your adventure gear and toys over your Isuzu D-Max EGR RollTrac roll cover.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Isuzu D-Max when fitted with a EGR RollTrac roll cover. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1475mm Load Bars that fit into the EGR RollTrac cover tracks, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto the EGR RollTrac cover tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRRT006 - Isuzu D-Max (2012-Current) EGR RollTrac Load Bed Load Bar Kit - by Front RunnerConsisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK017 - Roof Load Bar Pair 1475mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.24kg (18.17lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1585mm (62")Height: 165mm (6")Shipping Weight:Weight: 8.6kg (19lbs)
FRONT RUNNER Toyota Hilux (2005-2015) Load Bar Kit / Track...
$592.20
$658.00
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
A set of Load Bars with Track Mounted Feet used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 2 40mm Feet, 2 65mm Feet, 2 1165mm Load Bars, 2 Toyota Hilux 1240mm Tracks, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to the vehicle.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner Load Bars.These Load Bars are mounted to the vehicle’s roof via a set of supplied Tracks and Track Mounted Feet.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and mounting system can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTH012 - Toyota Hilux (2005-2015) Load Bar Kit / Track & Feet - by Front Runner
Consisting of:
1 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x FASS014 - Foot Set - Angled / 65mm - by Front Runner1 x LBSK013 - Load Bar Pair 1165mm(W) - by Front Runner1 x TRTH001 - Toyota Hilux (2005-2015) Tracks / 1240mm(L) - by Front Runner1 x WDLB001 - Load Bar Wind Deflector / 10mm - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 8kg (17lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot or Grab-On Foot Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle’s rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions:
Width 115mm (5")Length 1290mm (51")Height 240mm (9")
Shipping Weight:
Weight 8.9kg (19.5lbs)
FRONT RUNNER Ford Ranger Retrax Xr 6 (2019-2022) Double Load...
$537.30
$597.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Ford Range when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Ford Ranger when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRFR005 - Ford Ranger ReTrax XR 6" (2019-2022) Double Load Bar Kit - by Front RunnerConsisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)
FRONT RUNNER Rack Adaptor Plates For Thule Slotted Load Bars...
$107.10
$119.00
These adaptor plates give you the ability to attach 2 Thule slotted Load Bars or Aero Bars to a Front Runner Slimline II Roof Rack.
If you currently own Thule Accessories and would like to use them with a Front Runner Slimline II Roof Rack, you can use your Thule load bars or Aero Bars to mount your accessories (e.g. Bike Mounts or Kayak mounts) to the rack.
Works with both the SLOTTED-SQUARE and AERO Thule Load Bars. This adapter plate DOES NOT work with the Thule rectangular load bars that do not have slots (ie. the basic Thule load bar found in the USA.)
Steel.
Black powder coated.
Mounts onto individual slats via the T-slot system.
T-slot bolts included.
Pre-cut fitment holes.
Features
Works with:
Both the SLOTTED SQUARE and AERO Thule Load Bars.
Materials used:
2.5mm (0.098") high strength steel, supplied with mountings for Aero and Square Bar
Consists of:
4 x Thule Load Bar adaptors and a nuts and bolts kit
Product Dimensions:
L 290mm (11.42") x W 74mm (2.91") x H 27mm (1.06")
Weight:
2kg (4.4lbs)
FRONT RUNNER Toyota Hilux Revo Dc (2016-Current) Load Bar Kit...
$504.90
$561.00
Transport gear over the roof of your 2016-Current Toyota Hilux Revo DC with this low-profile set of Load Bars. This kit allows the use of many Front Runner rack accessories, without the need to install a full roof rack.
Includes wind deflector, four (4) mounting feet and two (2) 1165mm Load Bars that fit into the supplied tracks
Load Bars are mounted via mounting feet that bolt directly onto the supplied tracks
Uses the same strong, corrosion-free aluminum slats found in Front Runner racks
Sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats
Made from steel and durable, weather-resistant black powder coated aluminum
Includes all hardware, components and installation guide needed to fit Load Bars on a vehicle
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRTH022 - Toyota Hilux Revo DC (2016-Current) Load Bar Kit / Track & Feet - by Front RunnerConsisting of:2x FASS024 - Foot Set / 50mm - 60mm1x LBSK013 - Load Bar Pair 1165mm(W)1x TRTH006 - Toyota Revo DC (2016-Curr) Tracks/1300mm(L)1x WDLB001 - Load Bar Wind Deflector / 10mmMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.44kg (18.61lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1320mm (52")Height: 255mm (10")Shipping Weight:Weight: 7.14kg (16lbs)
FRONT RUNNER Toyota Land Cruiser 75/79 Load Bar Kit /...
$477.00
$530.00
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
A set of Gutter Mounted Load Bars used to transport gear on the roof of your vehicle when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 4 130mm Gutter Mount legs, 2 1425mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.Made from stainless steel and a durable, weather resistant black powder-coated aluminum.Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.Note: This Load Bar solution is not suitable for the Toyota Land Cruiser 75 Troopy edition. An appropriate Load Bar Kit Toyota Land Cruiser 78 3-Door Wagon Load Bar Kit / Gutter Mount is available.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of:2x LASS102 - No 2 Leg 130mm (Pair)1x LBSK016 - Roof Load Bar Pair 1425mm(W)1x WDLB001 - Load Bar Wind Deflector / 10mmMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8.65kg (19.07lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 115mm (5")Length: 1555mm (61")Height: 180mm (7")Shipping Weight:Weight: 8.57kg (19lbs)
FRONT RUNNER Toyota Tacoma Retrax Xr 5'6 (2007-Current) Double Load...
$573.30
$637.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Toyota Tacoma when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tacoma when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1575mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK018 - Roof Load Bar Pair 1575mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6.8kg (14.99lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1690mm (67")Height: 155mm (6")Shipping Weight:Weight: 9kg (20lbs)
FRONT RUNNER Toyota Tundra 6.4' Crew Max (2007-Current) Double Load...
$543.60
$604.00
Transport all your adventure gear safely over the bed of your Toyota Tundra Crew Max with this pair of strong, sleek, low-profile Pickup Bed Load Bars.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tundra Crew Max. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of:
2 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK018 - Roof Load Bar Pair 1575mm(W) - by Front Runner1 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 8.5kg (18.8lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 1685mm (66.0")Length: 150mm (6.0")Height: 200mm (8.0")
Shipping Weight:8.4kg (18.0lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon Retrax Xr 5In (2015-Current) Triple...
$811.80
$902.00
This triple set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon w/ReTrax XR rails. This low profile solution includes 3 x 1425mm Load Bars and 6 Pickup Roll Top Leg Mounts that fit into the existing ReTrax XR rails.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK020 - Roof Load Bar Set 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 8kg (17.64lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1560mm (61")Height: 230mm (9")Shipping Weight:Weight: 12kg (26lbs)
FRONT RUNNER Suzuki Eeco (2023-Current) Triple Load Bar Kit -...
$682.20
$758.00
Haul all manner of cargo and equipment on your Suzuki Eeco with these low-profile load bars. Made from durable, weather-resistant black powder-coated aluminum these bars are made to last and carry heavy loads
A set of Gutter Mounted Load Bars used to transport gear on the roof of your Suzuki Eeco when there’s no need for a full Front Runner Roof Rack. This low profile, smaller footprint solution includes 6 130mm Gutter Mount legs, 3 1255mm Load Bars, 1 10mm Roof Load Bar Wind Deflector and fitting instructions - all the components necessary to mount the Front Runner Load Bars to a vehicle with gutters.
You may not have the need for a full roof rack and find that you can get by using a set of Front Runner load bars.
Can be used to mount a Front Runner Roof Top Tent or other accessories where a low profile and smaller footprint is preferred.
The Load Bars are mounted directly to the rain gutters using Gutter Mounted Legs.
Uses the same strong, corrosion free aluminum slats found in Front Runner Slimline II Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
The Load Bars and Gutter Mount Legs can be used in the future as components to build a complete Front Runner Roof Rack.
Made from stainless steel and a durable, weather resistant black powder-coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: Load carry limit and accessory compatibility is reduced with load bars, Please also check the maximum roof load capacity of your vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
KRSE001 - Suzuki Eeco (2023-Current) Triple Load Bar KitConsisting of:3x LASS102 - No 2 Leg 130mm (Pair)1x LASS121 - Universal Pinch Weld Strip / 6 Piece1x LBSK021 - Roof Load Bar Set 1255mm(W)1x WDLB001 - Load Bar Wind Deflector / 10mmMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 13.99kg (30.84lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot, or Strap-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 125mm (5")Length: 1360mm (54")Height: 245mm (10")Shipping Weight:Weight: 13kg (29lbs)
FRONT RUNNER Toyota Tundra 6.4' Crew Max (2007-Current) Triple Load...
$855.00
$950.00
Keep your precious truck bed cargo space free and clear with these low-profile Load Bars, which also leave your drop down door functioning as usual. More storage, easy access.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Toyota Tundra 6.4' Crew Max. This low profile solution includes 6 Pickup Roll Top Leg Mounts, 3 1575mm Load Bars, 1 set of Load Bed Tracks and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly onto a set of Load Bed Tracks.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components and the installation guide needed to fit Load Bars on a vehicle.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Consisting of
3 x LASS026 - Universal Load Bed Leg / Tall (Pair) - by Front Runner1 x LBSK019 - Roof Load Bar Set 1575mm(W) - by Front Runner2 x RRAC901 - Load Bed Nut Kit / Toyota Tacoma 2004+/Tundra 2007+ - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 13.5kg (29.7lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 1685mm (66.0")Length: 150mm (6.0")Height: 270mm (11.0")
Shipping Weight:13.0kg (29.0lbs)
FRONT RUNNER Ute Bed Load Bar Kit / 1425Mm(W) -...
$633.60
$704.00
A set of Pickup Bed Load Bars used to transport gear over the bed of your truck. This low profile solution includes 4 Load Bed Leg Mounts, 2 1475mm Load Bars that fit into the included tracks of your Pickup.
Allows for gear to be mounted above the pickups load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder-coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Features
KRLB024 - Pickup Truck Bed Load Bar Kit / 1425mm(W) - by Front Runner
Consisting of:
2x LASS026 - Universal Load Bed Leg / Tall (Pair)
1x LBSK016 - Roof Load Bar Pair 1425mm(W)
1x TRBU001 - Pick-Up Load Bed Tracks / 1000mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
Approximate Installed Weight: 10.48kg (23.1lbs)
The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, or Grab-On Foot listed above.
If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.
If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 135mm (5")
Length: 1525mm (60")
Height: 310mm (12")
Shipping Weight:
Weight: 10kg (22lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,160.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,159.92
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$4,719.88
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,479.92
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
