Torqit
TORQIT CRM1064 POWER MODULE TO SUIT ISUZU D-MAX & MU-X
$1,485.00
$1,650.00
TORQIT POWER MODULE PLUS FOR ISUZU D-MAX 3.0L: 02/2017 – 09/2020
PERFORMANCE GAIN: 22KW / 91NM
The 3.0L, D-Max Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia’s first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you’re always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit’s unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle’s response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle’s fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle’s engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
Torqit
TORQIT CRM1062 POWER MODULE TO SUIT ISUZU D-MAX & MU-X
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1063 POWER MODULE TO SUIT HOLDEN TRAILBLAZER & COLORADO RG
$1,485.00
$1,650.00
TORQIT POWER MODULE PLUS FOR HOLDEN COLORADO RG 2.8L: 09/2016
PERFORMANCE GAIN: 29KW/94NM
The RG 2.8L, Colorado Power Module is a 4WD performance chip that safely unleashes power, torque and fuel efficiency lost through factory programming in your vehicle’s onboard computer.
THE TORQIT POWER MODULE USES LESS FUEL, YET CREATES MORE POWER BY MAXIMISING THE ENERGY OUTPUT FROM EACH DROP.
The Power Module alters your air to fuel ratio for a more optimum mixture, increasing power and torque for maximum performance. You’ll notice the pulling power instantly, enjoying a far smoother driving experience.
No matter what you’re towing, the Torqit Power Module ensures you get the most life possible out of your vehicle’s engine. It does this by reducing the wear and tear caused by the extra stress on the vehicle from the increased weight of towing heavy loads, whether a boat, trailer or caravan.
The Power Module Plus is Australia’s first Bluetooth-active diesel performance module. This means that once installed you can easily configure your vehicle tune through a smartphone app. The Torqit app allows you to control the power of your engine at the touch of a button for either fuel economy, maximum performance or standard settings without disconnecting the device. Torqit is also able to provide ongoing fine-tuning and upgrading of the software remotely, ensuring you’re always kept on the cutting edge of high-performance offroad driving.
REMOTE CONTROL KEY FOB
Using Torqit’s unique key fob remote control, you can change the mode of your Power Module by simply pressing the button of your desired mode. The key fob is a great way to alter your vehicle’s response without needing to use the Torqit App on your smartphone. An added bonus of the remote is if your vehicle has multiple drivers, the person driving the vehicle can easily change the settings to suit their preferences.
INSTALLATION
The Torqit Power Module can be installed in most petrol and diesel vehicles. The unit is fitted between two plugs in your vehicle’s fuel operating system, with the simple set up process taking just 15 minutes.
KEY FEATURES
5-year product warranty (Our warranty also covers your vehicle for the life of the New Vehicle Warranty*)
Fuel-saving capabilities
Greater power, torque and drivability
Safe, vehicle-specific software
Tune the vehicle’s engine remotely
Eases the towing of caravans, boats, trailers and horse floats
Rigorously tested for Australian conditions
Circuitry manufactured in Germany
Torqit
TORQIT CRM1052 POWER MODULE TO SUIT HOLDEN COLORADO & JEEP CHEROKEE, WRANGLER
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1009 POWER MODULE TO SUIT HOLDEN COLORADO & JEEP WRANGLER, CHEROKEE
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1023 POWER MODULE TO SUIT HOLDEN RODEO, COLORADO & ISUZU D-MAX
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1143 POWER MODULE TO SUIT FORD TERRITORY
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1049 POWER MODULE TO SUIT FORD RANGER & MAZDA BT50
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1065 POWER MODULE TO SUIT FORD RANGER
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Torqit
TORQIT CRM1048 POWER MODULE TO SUIT FORD EVEREST, RANGER & MAZDA BT50
$1,485.00
$1,650.00
Installation
Every Torqit Performance Module is specifically programmed for vehicle make, model and engine type. The installation of the system is easy and fast; simply plug the module into the existing factory component.
Key Features
* 5-year product warrantyFuel Saving Capabilities
* Improves vehicle power, torque and drivability
* Lets you remotely tune the vehicle's engine
* Ideal when towing caravans, horse floats, boats and trailers
* Extensively-tested for Australian conditions
* German-manufactured circuitry
Alpine
Alpine 8-Input Accessory Controller Module-KAC-001
$359.96
$399.95
8-Input Accessory Controller Module
Simplify and declutter your vehicle’s dashboard by controlling accessories like winches, spotlights, light bars, or even air suspension directly from your Alpine touchscreen!
The KAC-001 Accessory Control Module transforms your compatible Alpine Display Audio Receiver into a central hub for managing a variety of 12V electrical accessories. With eight individual outputs, you can control relay-connected accessories configured as Pulsed, Latched, or Momentary Outputs. Additionally, you can customise graphical icons and names for each accessory for easy identification on your screen.
*While the KAC-001 doesn’t need a Maestro module to operate, it does require a Maestro-compatible head unit, such as the iLX-F511Ai, iLX-F509Ai, or iLX-507Ai.
TJM
TJM PREMIUM CANOPY D/C PERFORMANCE BLUE M7412 FOR FORD RAPTOR 08/18-08/22 4 / FORD RANGER...
$4,799.00
Ford Ranger Raptor TJM Premium Canopy is a feature rich canopy, perfect for those who are looking for a convenient solution for their dual cab. Constructed from highly durable Fibreglass and finished in smooth colour-coded paint to match your ute. Sleek and modern frameless windows, with tinted tempered glass reduce UV damage to your cargo. Fully integrated central locking comes standard with all windows, linked with your vehicle's central locking system for added security. Ford Ranger Raptor TJM Premium Canopy makes access even easier with self-lifting side windows activated by a hidden push-button located on next to the windows. The rear door features an in-built demister to remove mist on cold mornings and an LED brake light on the spoiler for added safety. An interior LED light illuminates the inside canopy at night and the felt lining adds a premium finish and feel. You can be rest assured that your cargo will be kept safe and secured in style for many years to come!
Colour:
Performance Blue M7412
Suit:
Dual Cab
Central Locking:
Fully Integrated Central Locking
Windows:
- Front Window - Drop Down - Side Windows - Dual Lift Up
Construction:
- Smooth exterior - Felt lined interior
Finish:
Smooth
Light:
LED Brake Light and LED Interior Light
Standard Accessories:
- Roof Rail - Rear Spoiler
Optional Accessories:
- Rhino Roof Racks (100 kg rated) - Internal Support Systems
Warranty:
2 years
Package Weight:
90.00 kg
Compatible Vehicles
FORD RAPTOR 08/18-08/22 4Dr Pick Up
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XL 4Dr C/C & P/Up 2.2DT, 3.2DT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 2.0DTT
FORD RANGER PXIII 08/18-05/22 XLT 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 WILDTRAK 4Dr P/Up 3.2DT
FORD RANGER PXIII 08/18-05/22 XLS 4Dr Pick Up 3.2DT
Alpine
Alpine R-Series 10" Shallow Profile Dual 2 Ohm DVC High Performance Subwoofer RS-W10D2
$809.96
$899.95
The all-new R-Series shallow profile subwoofers are extreme in every way, commanding a tough and rugged appearance with high performance bass output to match.
Alpine takes compact bass to the next level with a state-of-the-art design coupled engineering innovation to accomplish an ultra-shallow profile without compromising on bass level output and quality in anyway. An exclusive dual gap motor structure combined with a powerful neodymium magnet allows for high power handling of 600Watts RMS and 1800Watts max. Moreover, with its bespoke cast aluminium frame and ground-breaking woofer cone design enables an incredibly linear X-max of 20mm ensuring the best possible bass performance.
Alpine’s R-Series Shallow Subwoofers give you the best of both worlds in size and sound.
What’s more, the optional mesh grille KTE-RS10G, exudes a tough look and adds a premium finish to your custom installation, all-while giving your equipment the protection it deserves.
More bass with less space—Alpine’s new Shallow R-Series rise to the top, giving you extraordinary bass performance in an ultra-compact form to suit and fit into virtually any application.
Features
10” High-Performance Shallow Bass Driver
Alpine Gen2 DD Linear Magnetic Circuit
Cast Aluminum Frame
Aluminum Dust Cap
Neodymium Magnet
4″ High Temperature Voice Coil
Heavy-gauge Screw Terminals
Compatible with KTE-RS10G Subwoofer Grille
Specifications
RMS Power Handling: 600W
Peak Power Handling: 1800W
X-Max: 20mm
Nominal Impedance: 2ohms+2ohms
Frequency Response: 29Hz-200Hz
Sensitivity: (1W/1M): 83dB
Voice Coil: 4″ (102mm)
Mounting Dimensions: 243mm diameter x 81mm depth
Front Runner
Front Runner 40in LED Light Bar VX1000-CB SM / 12V/24V w/Off-Road Performance Shield -RRAC265
$711.00
$790.00
A 40” LED Light Bar featuring 36 intense, high-performance LEDs, with OSRAM technology, that reaches a distance of 525m and delivers 6000 lumens. The 5700 Kelvin, light intensity is distributed as a combo beam pattern- near and far-field illumination. The intelligent reflector design diverts the light from the LEDs so that oncoming traffic is only indirectly exposed to the light.
To accommodate its wide range of uses, the searchlight is equipped with a durable polycarbonate lens. The integrated driver and thermal management system, measures and regulates the temperature of the LED, eliminating the risk of overheating and aiding in the longevity of its lifespan. Full LED polarity protection automatically breaks the circuit in the event of excess voltage, which ensures a long lifespan.
Individual installation is possible due to the VX1000-CB SM's double ECE certification. The 12V/24V LED light bar is ECE-compliant and versatile in application and is not limited to automotive use only. Special regulations and legislation within each country should be taken into consideration before use. Secures to your Front Runner Roof Rack with supplied RRAC217.
Consists of:1 x Lightbar1 x Set of Front Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Set of Underneath Mount Brackets (1 Left Hand side & 1 Right Hand side)1 x Front CoverInstallation HardwareFitting Instructions
Materials used:Black powder coated steel and aluminium mounting brackets
Product Dimensions:Light Bar:1031mm (40.6") L x 67mm (2.6") D x 35mm (1.4") H
Light Bar with Bracket:1070mm (42.1") L x 102mm (4") W x 58mm (2.3") H
Weight:5.56kg (12.3lbs)
Special Notes:Product type: On-road and off-roadSKU: VX1000-CB SMLED supplier: OSRAMLumens: 600012/24VColor temperature: 5700 KLifespan Tc: 5000 hGuarantee: 5 yearsDouble ECE-Certification: 2x R112Reference Number: (37,5 + 37,5)
Direction-Plus
DIRECTION-PLUS TRANSCHILL DUAL TRANSMISSION COOLER KIT MITSUBISHI TRITON MQ & MR (TCD629DPK)
$575.10
$639.00
The TransChill Transmission cooler kit TCD629DPK fits Mitsubishi Triton MQ/MR 4N15 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
By installing a dual cooler kit you will have a higher cooling capacity than the single cooler kit TC629DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT) or 2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL DUAL TRANSMISSION COOLER KIT HOLDEN COLORADO (TCD602DPK)
$719.10
$799.00
The TransChill Transmission cooler kit TCD602DPK (dual cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
2x Davies Craig 23 row oil cooler (DOUBLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT HOLDEN COLORADO (TC602DPK)
$539.10
$599.00
The TransChill Transmission cooler kit TC602DPK (single cooler) fits Holden Colorado models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 19mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 19mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
100% pressure tested at 150psi for quality assurance
33% more efficient than a comparable tube and fin design
Pre-drilled mounting plates for easy installation
Internal tubulation for efficient heat transfer
3/8” (9 mm) push-on fittings for quick and easy installation
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
By having two coolers the TCD602DPK kit has a higher cooling capacity than the single cooler kit TC602DPK.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig 23 row oil cooler (SINGLE COOLER KIT)
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FORD NEXT GEN RANGER / EVEREST (TCB671DPK)
$674.10
$749.00
The TransChill Arctic Black Transmission cooler kit TCB671DPK fits:
Ford Next Gen Ranger YN2S (2.0L 4cyl) 2022 – On
Ford Next Gen Everest YN2S (2.0L 4cyl) 2022 – On
This Transmission Cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT FORD RANGER, EVEREST PXIII BI-TURBO (TCB663DPK)
$674.10
$749.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB663DPK fits Ford Ranger, Everest PXIII Bi-Turbo YNWS (2.0L 4cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Black Transmission Cooler Kit for D-MAX & BT-50 (TCB645DPK)
$584.10
$649.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT TOYOTA LAND CRUISER 300 SERIES (TCB635DPK)
$539.10
$599.00
The Transchill Arctic Black Transmission cooler kit TCB635DPK fits:
Toyota Landcruiser 300 Series F33A-FTV (3.3L 6cyl) 2022 – On
* Vehicles with standard bumper may require minor trimming of some plastic bumper supports.
This transmission cooler is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT NISSAN NAVARA NP300 (TCB630DPK)
$539.10
$599.00
The NEW & IMPROVED 32mm 14 row Arctic Black TransChill Transmission Oil Cooler Kit (TCB630DPK) suits the Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015- On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
Pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
75% more performance than a comparable tube and fin design (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Australian Made vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
Locally designed and packed with all the mounting hardware required for a DIY installation
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT TOYOTA HILUX N80 (TCB628DPK)
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FORD RANGER, EVEREST & BT-50 (TCB621DPK)
$629.10
$699.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB621DPK fits Ford Ranger, Everest and Mazda BT-50 P5AT (3.2L 5cyl) models. It is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT TOYOTA PRADO 150 & 155 SERIES (TCB620DPK)
$485.10
$539.00
The TransChill Arctic Black Transmission cooler kit TCB620DPK fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Black Transmission Cooler Kit LAND CRUISER 200 (TCB615DPK)
$539.10
$599.00
The NEW 32mm 14 row TransChill Arctic Black Transmission cooler kit TCB615DPK fits Toyota Landcruiser 200 Series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT FOR TOYOTA HILUX N70 (TCB612DPK)
$485.10
$539.00
The TransChill Arctic Black Transmission cooler kit TCB612DPK fits Toyota Hilux N70 1KD-FTV (3.0L 4cyl) 2004-2015 & 1GR (4.0L 6cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
DIRECTION-PLUS TRANSCHILL ARCTIC BLACK TRANSMISSION COOLER KIT ISUZU D-MAX & MU-X (TCB601DPK)
$485.10
$539.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB601DPK fits Isuzu D-Max and MU-X 4JJ1TCX (3.0L 4cyl) 2012 – 2020 models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
Direction-Plus
Direction-Plus TransChill Arctic Transmission Cooler Kit -TCBUNIDPK
$521.10
$579.00
The NEW 32mm 14 row Universal TransChill Arctic Black Automatic Transmission cooler kit TCBUNIDPK and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Automatic Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
GME
GME XRS™ CONNECT BLUETOOTH INTERFACE MODULE AND WIRELESS PTT -XRS-BT1
$199.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
Introducing the all-new XRS™ Connect Bluetooth® Interface Module and Wireless PTT from GME, the XRS-BT1.
The XRS-BT1 is an interface module bringing full Bluetooth® audio connectivity and wireless PTT (Push-to-Talk) functionality to the full range of XRS™ Connect UHF CB Radios.
Bluetooth® audio connectivity allows the XRS-BT1 to wirelessly connect to an extensive range of third-party audio accessories including headphones, hearing aids, and vehicle stereo systems, providing users with new and improved ways to stay connected.
Included in the kit is an adjustable steering wheel clamp which provides a simple mounting solution for the IP67 wireless PTT button and a wired hands-free microphone with a 1.8 metre cable for easy mounting options.
The PTT clamp design provides access to the battery without the need to remove it from the steering wheel, plus, the PTT button can also be removed from the clamp and mounted to an alternative location using the dash mount kit supplied.
Bluetooth® Wireless Technology – Audio and Data
Connect to Compatible Bluetooth® Audio Devices
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
Wired Push-To-Talk Input
3 Year Warranty
Key Features
Bluetooth® Wireless Technology – Audio and Data
Connect to Compatible Bluetooth® Audio Devices
Wireless Push-to-Talk
Adjustable Steering Wheel Clamp
IP67 Ingress Protection (XRS-PTT)
Wired Push-To-Talk Input
In the box
Bluetooth® Interface Module
Wireless PTT and Steering Wheel Clamp (XRS-PTT)
Pillar Mount Microphone (MC014)
PTT Dash Mount Kit
2mm Silicone Sleeve
GME
GME HIGH PERFORMANCE COMPACT ANTENNA - SUIT TX6500S - AE4023
$35.00
For over 60 years GME has designed and manufactured an extensive range of high quality accessories to suit a wide variety of applications. From 4WDing to Boating and Fishing, GME has a genuine accessory to meet every need.
High Performance Compact Antenna – Suit TX6500S.
Genuine GME Accessory
Key FeaturesCompact DesignFlexible RubberHelical Style ConstructionTNC Connector
In the boxWhip Only
MSA
MSA 4x4 1350 RIGHT STORAGE DRAWER MODULE
$1,152.91
$1,281.01
MSA 1350 RIGHT STORAGE DRAWER MODULE -E1350-RIGHT
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
TJM
TJM ULTIMA CONNECT+ CONTROL SWITCH MODULE
$159.01
Maximise the performance of your TJM Ultima LED Light Bars with beam shape and intensity adjustment to suit your driving conditions. No relays are required when using LINbus controller. · 3 Preset, customisable driving modes to suit dirt roads, 4WD tracks and highway driving. · Adjustable brightness (main & aux controls). · Boost mode allows you to override all settings and provides 15% more power to maximise light output for up to 30 seconds. · Single point of control for all your Ultima Connect+ enabled products. · Ability to fine tune lights and increase/decrease the output. · Multiples mounting options to suit your vehicle applications. Specifications Kit: 1 x Connect+ Controller 1 x Mounting bracket 1 x 3m Wiring harness 1 x 1m Fused power cable 1 x Adhesive strip 4 x Self tapping screws Input Voltage Range: 9-33V Housing Material: ABS PLASTIC + PA6 Protection: Reverse polarity protection EMC: ECE R10 Weight: 20g Package Weight: 0.40 kg
Torqit
Torqit 6" DPF BACK EXHAUST: PERFORMANCE EXHAUST FOR 6.7L F250 HS8187SS
$3,141.00
$3,490.00
6″ DPF BACK EXHAUST FOR FORD F250 6.7L: 2011 – 2016 (GEN 3)
PERFORMANCE GAIN: TBC
Give your 4WD extra grunt and a deeper exhaust note with Torqit’s F250 Stainless Performance Exhaust.
The Ford F250 is a big truck with a big personality. In turn, it needed a big exhaust system to complement its aesthetics. It is the largest Torqit exhaust system we have ever fabricated, with a 6” pipe that connects to the back of the DPF. We have put in extensive R&D to deliver the perfect mix of exhaust note, performance and quality.
Designed for maximizing your power and torque, the DPF back 6” exhaust for the Ford F250 is one of the thickest, largest and most durable mandrel bent system of its kind. The system has been tried and tested in some of the toughest Australian conditions. The exhaust system is manufactured from 304 grade stainless steel.
As the DPF is located so far down the vehicle, it is a short path from the DPF to the rear of the vehicle, yet the system still includes several bends for optimum clearance, heavy duty brackets for secure fitment, and a V-band flange. The V-band flange provides a lightweight alternative to a three-bolt flange. Since this 6″ system is so large, it provides additional strength by absorbing the circumferential load.
Torqit’s 6” F250 exhaust bolts onto the back of the DPF and complies with all regulations and insurance requirements, so your vehicle warranty will remain intact. As the owner of a vehicle fitted with a DPF, you are probably aware there are few things that will damage a diesel engine faster than excessive Exhaust Gas Temperatures (EGT’s). The Torqit DPF Back Ford F250 Performance Exhaust aims to lower these EGT’s by improving the flow of gases, and increasing engine efficiency and fuel economy.* It is the ideal alternative to deleting your DPF without the legal ramifications.
PERFORMANCE EXHAUST FEATURES
Thick Stainless SteelAn exhaust system is exposed to many varied elements, including extreme heat and rough terrain. To handle these harsh conditions, we use stainless steel that is up to 2mm thick to maintain structural strength even after bending. Being extremely durable and difficult to crack, you can go off-road with peace of mind that your Torqit Performance Exhaust system will stay intact. Steel thickness not only affects the strength of an exhaust system, but also the sound it will produce- the thinner the steel, the tinnier the note. As among the thickest mandrel bent systems available in Australia, Torqit Performance Exhausts produce a deep note without cabin drone. Click here to listen to the sound of cheap vs quality stainless steel.
304 Grade Stainless SteelThe highest quality steel used in exhaust systems is 304 grade stainless, which is renowned for its high strength, corrosion resistance, and easy maintenance. It is known as an austenitic stainless steel, meaning due to a high percentage of chromium and nickel it is extremely resistant to rust, stress, and harsh conditions such as high temperatures. The excellent properties of Torqit’s 304 grade stainless demonstrate its strength in comparison to the 409 grade stainless commonly used in the automotive industry. For heavy duty strength and resistance to corrosion, 304 grade stainless steel is the superior choice. A 4WD owner who undertakes water crossings, backs their vehicle into the water to unload a boat, or lives by the coast will especially benefit from our stainless steel systems.
Internal & External WeldsHigh quality welds are essential to avoiding structural fatigue on joints, stopping cracks from forming, and preventing exhaust gas leaks. All Torqit Performance Exhausts are TIG welded internally and externally, to reinforce the system for maximum strength. TIG welding is complex and more time consuming than the usual MIG welding technique used on exhausts; however it is a key part of creating a premium system. Torqit’s welds are extremely precise, higher quality, and create a beautiful clean finish with no welding spatter.
Mandrel Bent SystemTorqit’s Mandrel Bender uses a flexible mandrel rod to support the pipe internally and prevent crinkling as it is bent. This maintains a smooth and constant diameter, improving the efficiency of your engine. With Torqit’s in house mandrel bender, we can maintain the structural integrity and thickness of our systems, prevent restricted exhaust flow, and reduce back pressure. State of the art programming means each exhaust is precisely replicated to follow the correct path, and guarantees accurate fitment.
FEATURES
Brushed stainless steel tube up to 2mm thick
Premium 304 grade stainless steel
Fully mandrel bent system
Internal and external welds
Heavy-duty wrap around brackets
DIY bolt together install
Ten year product warranty
Torqit
Torqit 3 DUAL EXIT CAT BACK EXHAUST FOR DS RAM 2009-2018 HS8160SS
$2,385.00
$2,650.00
3″ DUAL EXIT CAT BACK EXHAUST FOR DS 1500 5.7L RAM: 2009-2018
Perfect for towing and touring, Torqit’s DS 1500 Ram Stainless Performance Exhaust is expertly designed and manufactured to increase power from your exhaust and generate a deep note.
Torqit Performance Exhausts are specifically designed to create a deep note and improve vehicle performance. Our DS RAM exhaust is manufactured using 304 grade stainless steel. The thickness of the steel is 1.7mm on the bends and 2mm on straights. The high quality steel and thickness produces a deep note and guarantees extreme strength even in the toughest terrain.
This exhaust follows the same path of the factory system. It is a 3″ system that can begin from either the headers or the catalytic converter, then trails into a twin exit 5″ exhaust outlets. The design incorporates a muffler. This design reduces the restriction on the flow of the exhaust system whilst still retaining a decent and acceptable sound.
On an exhaust system, once the internal combustion takes place, the engine expels exhaust gasses in the form of high-pressure pulses. These high-pressure pulses create very powerful sound waves. A muffler helps to reduce the sound to a tolerable level. The choice of muffler in this system provides good performance and a nice tone without stealing too much backpressure.
FEATURES
Thick Stainless Steel
All Torqit exhausts have a thickness up to 2mm. This thickness produces a deeper note without cabin drone. Torqit exhaust systems are one of the thickest mandrel bent exhausts in Australia. Due to the thickness, it is extremely difficult to crack, so you can go off road with peace of mind that your system will stay intact.
304 Grade Stainless Steel
304 grade stainless steel is the highest quality material used for exhaust systems. The premium steel will not rust and is much stronger than 409 grade stainless. Our high quality steel produces a deep note and guarantees extreme strength even in the toughest terrain.
Internal & External Welds
All Torqit Performance Exhausts have internal and external welds to increase the strength of the exhaust system. The reinforced system makes it extremely difficult to crack, even in tough off-road applications.
Mandrel Bent System
Mandrel bending supports the exhaust pipe from the inside as it is bent, this prevents crinkling of the pipe. The results are smooth and constant-diameter bends that reduce restriction and improve both the performance and efficiency of your engine.
INSTALLATION
Every Torqit performance exhaust system is designed to bolt together, meaning you can finalise fitment without a hoist. Choose to install the exhaust yourself or arrange for it to be fitted at your local Torqit stockist – whichever works best.
Fitment takes from 60 minutes to three hours depending on the specific exhaust system, whether you have access to a hoist and your expertise with the required tools.
FEATURES
10 year warranty on stainless steel systems.
Bolt together installation.
Deeper note without the cabin drone.
Mandrel bent system
Thick stainless steel
Premium 304 grade stainless steel
Internal and external welding.
2 & 3 bolt 10mm laser cut flanges.
Heavy duty wrap around brackets.
Stainless steel barrels in every system.
Torqit
MODULEMAP: REMOTE REMAP FOR NISSAN NAVARA D40 (12/2005)MMP21-90
$1,791.00
$1,990.00
MODULEMAP FOR NISSAN NAVARA D40 2.5L: 12/2005…
Access the full potential of your D40 Nissan Navara with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your Navara safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your D40 Navara to stock performance
Torqit
MODULEMAP: REMOTE REMAP FOR 2.2L BT50 (10/2011 06/2016) MMP21-41
$1,791.00
$1,990.00
MODULEMAP FOR MAZDA BT50 2.2L: 10/2011 – 06/2016
PERFORMANCE GAIN: 34KW / 116NM
Access your BT50’s full potential with European race technology. A super-fast and powerful ECU programming tool, the ModuleMap allows you to calibrate and optimise your 2.2L, BT50 factory settings.
Boost power and torque for an overall increase in performance
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your vehicle safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your vehicle’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your vehicle to stock performance
Torqit
MODULEMAP: REMOTE REMAP FOR HOLDEN COLORADO 7, 2.8L 10/2013 42401
$1,791.00
$1,990.00
MODULEMAP: REMOTE REMAP FOR HOLDEN COLORADO 7, 2.8L 10/2013 – 02/2016
PERFORMANCE GAIN: 28KW / 99NM
Access the full potential of your Colorado 7 with Torqit’s fast, powerful ECU programming solution – ModuleMap. Remotely tuned by Torqit’s software technicians, ModuleMap safely calibrates and optimises your vehicle’s factory settings from the comfort of your driveway.
Get a 21% boost power and torque*
Choose between three tunes instead of one permanent tune
Return your vehicle to stock performance at any time
Install in less than 30 minutes with simple plug-in software, and let Torqit’s software technicians do the rest
Keep your Colorado safe and reliable with a tune that does not exceed the safety parameters or push it beyond its limits
Instead of being locked into one permanent tune, Torqit’s ModuleMap gives you three tunes for total control over your Colorado’s performance.
Cruise mode: ideal for everyday driving and towing heavy loads
Sport mode: gives you maximum power and torque
Standard Mode: a copy of the ECU, which returns your Colorado to stock performance
Each tune is completely customised to your vehicle’s modifications, such as tyres, snorkel, weight and more. Feel the instant increase in power and torque, and get rid of sluggish performance with the ultimate ModuleMap solution – powerful, flexible, and safe.
Direction-Plus
Direction-Plus Transchill Transmission Cooler Kit 200 Land Cruiser
$767.21
$852.45
The TransChill Transmission dual cooler kit TCD615DPK fits Toyota Landcruiser 200 series models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific mounting brackets
Stainless steel fixing hardware
ATF Hose (400psi J1019)
2x 23 row oil cooler
Direction-Plus
DIRECTION-PLUS TRANSCHILL TRANSMISSION COOLER KIT TOYOTA HILUX
$468.41
$520.45
The TransChill Transmission cooler kit TC628DPK fits Toyota Hilux models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C. It’s a reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific mounting brackets
Stainless steel fixing hardware
ATF Hose (400psi J1019)
23 row oil cooler
Direction-Plus
DIRECTION-PLUS TRANSMISSION COOLER KIT ISUZU D-MAX MU-X AND MAZDA BT-50
$883.31
$981.45
Experience optimal performance with the top Directions Plus Transchill Transmission Cooler Kit. Suits Isuzu D-Max, MU-X, and Mazda BT-50. Unmatched quality
Torqit
DOMINATE THE ROAD TORQIT 3.5" DPF EXHAUST VOLKSWAGEN AMAROK 3.0L (PICK UP ONLY)
$1,971.00
$2,190.00
Unleash uncompromising power and performance with the stainless steel Torqit DPF Back Exhaust. Suits Volkswagen Amarok 3.0L. Elevate your driving experience today
Torqit
DYNAMIC CAR BACK 3" DPF EXHAUST TORQIT VOLKSWAGEN AMAROK 2.0L(PICK UP ONLY)
$1,521.00
$1,690.00
Unlock the full potential of your ride with the precision-engineered stainless steel Torqit DPF Back Exhaust. Suits Volkswagen Amarok 2.0L. Unleash the power
Torqit
CUSTOMISED CAR EXHAUST UPGRADES TORQIT TWIN 3 AND DUAL TOYOTA 200 SERIES (PICK UP ONLY)
$3,690.00
$4,100.00
Unleash power and style with our top-of-the-line stainless steel Torqit TW Twin 3” Turbo Back Exhaust Dual Left and Right. Suits Toyota 200 series. Elevate your ride to new heights
Torqit
EXPERIENCE POWER TORQIT 3" TURBO BACK EXHAUST TORQIT TOYOTA LANDCRUISER WAGON 100 SERIES(PICK UP ONLY)
$1,791.00
$1,990.00
Upgrade your vehicle's performance with the superior stainless steel Torqit Turbo Back Exhaust. Suits Toyota 100 Series. Unleash the beast within your engine
Torqit
TORQIT 3.5" DPF BACK EXHAUST TO SUIT TOYOTA 79 SERIES (PICK UP ONLY)
$1,971.00
$2,190.00
Achieve optimal performance with the top-notch Stainless Steel Torqit DPF Back Exhaust. Suits Toyota 79 Series. Power and style reimagined
Torqit
ELEVATED PERFORMANCE 3.5" DPF BACK EXHAUSTS TORQIT TOYOTA LANDCRUISER WAGON 79 SERIES (PICK UP ONLY)
$1,521.00
$1,690.00
Upgrade your vehicle's exhaust system to the outstanding Stainless Steel Torqit DPF Back Exhaust. Suits Toyota 79 Series. Free the BEAST
Torqit
CUSTOM ENGINEERED CAR: 3.5" BACK TWIN TORQIT EXHAUST TOYOTA LANDCRUISER WAGON 79 SERIES (PICK UP...
$3,321.00
$3,690.00
Experience the thrill of high performance with the stainless steel Torqit Back Exhaust Twin Left and Right Exit. Suits Toyota 79 Series. Power and style combined
Torqit
DOMINANT CAR 3" EXHAUST SOLUTIONS TORQIT TOYOTA LANDCRUISER WAGON 79 SERIES (PICK UP ONLY)
$1,710.00
$1,900.00
Unleash the power of your vehicle with the prime Stainless Steel Torqit Back Exhaust System. Elevate your driving. SuitsToyota 79 Series
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
