MSA
MSA 4X4 PATROL Y62 RIGHT STORAGE DRAWER SYSTEM
$1,580.40
$1,756.00
Suits Nissan Patrol Y62
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1110mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
TJM
TJM DEEP DISH CAR MATS FOR MAZDA BT-50 DUAL CAB (3RD GEN) 2020+ MZB002-3D
$259.00
Introducing RubberTree Deep Dish Floor Liners . Whether its just the day to day city drive, escaping into the world of adventure or a hard slog on site, these floor liners provide the ultimate vehicle interior protection. Crafted from recycled materials, these floor liners are as tough on mess as they are on environmental impact. They boast 100% waterproof protection, making cleanup a breeze after muddy trails or messy commutes. With vehicle-specific retention clips & precision moulded fit, these liners stay securely in place whilst protecting your footwell interior along every contour. Plus, rest easy with our Wear-through Lifetime Manufacturer's Warranty, guaranteeing long-lasting durability. Keep it simple and elevate your vehicle's interior with RubberTree Deep Dish Floor Liners. Your vehicle deserves the best, and so do you.
Specifications
Size:
Full Set - 1st & 2nd Row
Clips:
Vehicle specific retention clips
Material:
Recycled Material / 100% Waterproof
Warranty:
Wearthrough lifetime warranty
Fitment:
3D scanned for precision fit
Compatible Devices
MAZDA BT-50 TF 08/20-On 4dr Cab Chassis & Pick up
MSA
MSA LC777CO TOYOTA LANDCRUISER 76 SERIES WAGON WORKMATE GXL COMPLETE FRONT & SECOND ROW SEAT...
$732.60
$814.00
Complete Front & Second Row Set.
Year: 08/12-09/16
Model: LC76 Wagon Workmate / GXL
Position: Complete
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
MSA
MSA HL45 TOYOTA HILUX HI-LUX LN167 WORKMATE 2WD FRONT FULL WIDTH BENCH SEAT COVER
$363.60
$404.00
Front Full Width Bench.
Year: 08/97-04/05
Model: LN167 WORKMATE 2WD
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
MSA
MSA HL6667CO TOYOTA HILUX 8TH GEN SR5 / SR EXTRA CAB 08/19-TO-CURRENT COMPLETE FRONT ROW...
$578.71
$643.01
Complete Front & Second Row Set.
Year: 08/19-Current
Model: 8th Gen SR5 / SR Extra Cab
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
Position: Complete
MSA
MSA 8002 TOYOTA LANDCRUISER 80 SERIES STANDARD FRONT BUCKET & 3/4 BENCH (MTO) SEAT COVER
$297.90
$331.00
Front Bucket & 3/4 Bench (MTO)
Year: 01/90-12/97
Model: 80 Series STANDARD
Position: Front
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
TJM
TJM MULTI-POSITION LOAD TIEDOWNS (PACK OF 4)-034TTIEDM84
$55.00
Secure your load with confidence using the TJM MOD X Multi-Position Load TieDowns, which come in a pack of 4. These tie downs feature a high-capacity screw-in design, ensuring that your gear stays safe and secure even on the toughest terrain. They are perfect for securing a fridge or freezer while on the road, making sure that your food and beverages are kept in place and easily accessible when you need them.
Load Rating:
180KG (static pull-load)
Kit Contents:
Packet of 4
Package Weight:
0.30 kg
Front Runner
FRONT RUNNER TOYOTA PRADO 120/LEXUS GX470 6 CUB PACK DRAWER KIT SSTP005
$2,817.00
$3,130.00
Storing, organizing, and moving gear in the Toyota Prado/Lexus GX 470 just got easier. This Cub Pack based lockable drawer system provides a comprehensive and practical storage solution for easily transporting stored items between a vehicle and the campsite, garage, store, etc. Designed specifically to fit the contours of the Toyota Prado/Lexus GX470. Engineered tough for both on and off-road conditions.
This removable box drawer kit includes 1 drawer slides, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.These stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawers\ “lock” open while parked on uneven surfaces.
High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
The push-to-latch mechanism is lockable when closed.
Provide peace of mind and security by locking away important support gear.
The flat deck incorporates three cargo attachment channels and 6 Black Tie Down Rings / Eye Nuts.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminium boxes and other storage containers to the top deck using Stratchits.
The deck above the drawer can also be used to mount Front Runner Cargo/Fridge Slides.
The left and right-side Faceplates have 4, pre-cut, knock-outs each for adding electrical panel socket inserts (sold separately).
The side decks are easily removable creating storage pockets between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, snorkels, masks, fins, kindling, barbeque skewers, etc.
The deck is covered with a durable, UV resistant nylon pile carpet.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as the Front Runner Slimline Rack and other Front Runner products.
This Front Runner Removable Box Drawer Kit can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy.
This storage system is designed for interior use.
All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys1 x Deck Completion Set3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top and Side DecksProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 1425mm (56.1") W x 338mm (13.3") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:72.1kgLoad Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 79 DC DRAWER KIT SSTL007
$3,218.00
$3,575.00
Make storing and organizing gear and valuables a no-brainer. This lockable drawer, with fitted decks and faceplates, has been designed specifically for the Toyota Land Cruiser 79 DC. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.Engineered tough for both on and off-road travel.
This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie-down rails, 6 tie-down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer "locks" open while parked on uneven surfaces.
High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smartphones, and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Black {SSCA047~showName).
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This drawer kit can be easily installed in minutes by securing the drawers via 3 channels and supplied hardware.
Drilling is required to fit the 3 securing channels into the Toyota Land Cruiser 79 load bed.
All Front Runner Storage Systems are backed by a 2 year warranty.
*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.
Consists of:1 x Front Runner Drawer unit (SSDR012)1 x Toyota Land Cruiser 79 DC Drawer Deck Completion Set (SSDS120)1 x Custom Wing Set1 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory ChannelsBlack powder coated steel - Drawer Bins, Frame & Mounting ChannelsCarpeted & Laminated plywood - Top Deck & Deck SetsProduct Dimensions:Overall Closed Dimensions:1510mm (59.5") L x 1575mm (62") W x 295mm (11.6") HDrawer Internal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HOpen Dimensions:2100mm (82.7") L x 860mm (33.9") W x 295mm (11.6") HWeight:89.3kg (196.9lbs)Load Rating:180kg (396.8lbs)
Front Runner
FRONT RUNNER TOYOTA LAND CRUISER 79 DC TOURING DRAWER KIT SSTL003
$3,257.00
$3,619.00
Make storing and organizing gear and valuables a no-brainer. This lockable drawer with fitted decks and faceplates have been designed specifically for the Toyota Land Cruiser 79 DC. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle.Engineered tough for both on and off-road travel.
This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer "locks" open while parked on uneven surfaces.
High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides.
A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window.
The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicle’s interior contours.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This drawer kit can be easily installed in minutes by securing the drawers via 3 channels and supplied hardware. Drilling is required to fit the 3 securing channels into the Toyota Land Cruiser 79 load bed.
All Front Runner Storage Systems are backed by a 2 year warranty.*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.
Consists of:1 x Front Runner Drawer unit (SSDR012)1 x Toyota Land Cruiser 79 DC Drawer Deck Completion Set (SSDS107)1 x Wing Set (SSWS004)1 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Aluminum - Accessory ChannelsBlack powder coated steel - Drawer Bins, Frame & Mounting ChannelsCarpeted & Laminated plywood - Top Deck & Deck SetsProduct Dimensions:Overall Closed Dimensions:1510mm (59.5") L x 1574mm (62") W x 335mm (13.2") HDrawer Internal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HWeight:80.5kg (177.5lbs)Load Rating:180kg (397lbs)
Front Runner
Front Runner Ute Drawers / Medium SSDR012
$2,594.00
$2,882.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider these “universal” drawers. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.Includes turnbuckles and carabiners to facilitate installation to many vehicle factory mounting points.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces.
High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchit or other straps.
The deck above the drawers can also be used to mount Front Runner Fridge/Cargo Slides.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant nylon pile carpet.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These "universal” drawers do not come with a vehicle specific deck completion set or faceplates.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs and Flat Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Medium Pick Up Drawer unit1 x Push to close latch with 2 keys3 x Accessory Channels6 x Eye Nuts for Accessory ChannelsInstallation HardwareFitting InstructionsMaterials used:Black powder coated steel - Drawer BinCarpet & Laminated plywood - Top DeckProduct Dimensions:Overall Dimensions:1170mm (46.1") L x 860mm (33.9") W x 295mm (11.6") HInternal Dimensions:1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") HOpen Dimensions:2100mm (82.7") L x 860mm (33.9") W x 295mm (11.6") HWeight:67.8kg (149.5lbs)Load Rating:180kg (137lbs)
Front Runner
Front Runner SUV Asymmetric Drawers / Large SSDR002
$2,643.00
$2,937.00
Make storing and organizing gear and valuables a no-brainer. These 2 lockable drawers can be fitted in many vehicles as a “universal” drawer solution. Hide contents from prying eyes while creating more usable and easily accessible storage space in your vehicle. Engineered tough for both on and off-road travel. Product Dimensions: 976mm (38.4") L x 1003mm (39.5") W x 318mm (12.5") H
f Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider these “universal” drawers. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.Includes turnbuckles and carabiners to facilitate installation to many vehicle factory mounting points.
Features one large sized drawer and one medium sized drawer for all storage needs.
113kg / 250 lb per drawer load carrying capacity.
High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer.
The deck is covered with a durable, UV resistant nylon pile carpet.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
All Front Runner Storage Systems are backed by a 2 year warranty.NOTE: These "universal” drawers do not come with a vehicle specific deck completion set or faceplates.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs, Flat Packs and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Front Runner Drawer unit2 x Push to Close latch with 2 keys per lock3 x Accessory Channels6 x Eye Nuts for Accessory ChannelInstallation Hardware including 4 turnbuckles to secure unit to vehicleFitting InstructionsMaterials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - Drawer Bins & FrameCarpet & Laminated plywood - Top DeckProduct Dimensions:Closed:976mm (38.4") L x 1003mm (39.5") W x 318mm (12.5") HOpen:1896mm (74.7") L x 1000mm (39.4") W x 328mm (12.9") HInterior Drawer Dimensions:Left Hand Drawer:914mm (36") L x 461mm (18.2") W x 208mm (8.2”) HRight Hand Drawer:914mm (36") L x 373mm (14.7") W x 208mm (8.2”) HWeight:76.8Kg (169.3lbs)Load Rating:113Kg (250lbs) per DrawerSpecial Notes:4 Drawer dividers (SSCA048) can fit each drawer
Front Runner
Front Runner Cargo Slide/Fridge Slide / 40L to 52L- FSLI005
$423.00
$470.00
This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space.
Mountable to any flat surface, including Front Runner drawer systems and pick-up truck beds.
Mounting holes are predrilled.
High strength bearing drawer slides allows the tray to extend nearly 100% from the anchored base.
Unique design keeps the slide rattle free when closed.
A clip latch securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Mounting hardware included for wood and metal surfaces.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately,
Consists of:1x Fridge SlideInstallation HardwareFitting InstructionsMaterials used:Black powder-coated mild steelProduct Dimensions:Overall Dimensions793mm (31.2") L x 535mm (21.1") W x 85mm (3.3") HClosed Dimensions:793mm (31.2") L x 533mm (21.0") W x 85mm (3.3") HOpened Dimensions:1529mm (60.2") L x 533mm (21.0") W x 85mm (3.3") HInner Dimensions:735mm (28.9") L x 460mm (18.1") W x 64mm (2.5") HWeight:16.4kg (36.2lbs)Load Rating:113Kg (250lbs)
Front Runner
FRONT RUNNER LAND ROVER ALL-NEW DISCOVERY (2017-CURRENT) DRAWER KIT -SSLD006
$3,527.00
$3,919.00
This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
113kg / 250 lb per drawer load carrying capacity.
High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides.
Faceplates have 6 pre cut knock-outs for adding monitoring or electrical panel socket inserts.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, just insert 2 Cub Pack. Designed to fit inside Front Runner drawers, the Cub Pack can be used to further organize and move gear in and out of a vehicle.
To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer.
The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
All Front Runner Storage Systems are backed by a 2 year warranty.
The LAND ROVER ALL-NEW DISCOVERY DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare.
*Please Note: Cub Pack and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR002)
1 x Land Rover All-New Discovery Deck Completion Set
2 x Push to Close latch with 2 keys per lock
3 x Accessory Channels
6 x Eye Nuts for Accessory Channel
1 x T Wrench with 1 custom sockets for wheel winder
Installation Hardware including 4 turnbuckles to secure unit to vehicle
Fitting Instruction
Materials used:
Aluminum - Accessory Channels & Sub Frame
Black powder coated steel - Drawer Bins & Frame
Carpet & Laminated plywood - Top Deck & Deck Set
Product Dimensions:
Overall Dimensions:
974mm (38.3") L x 1324mm (52.1") W x 330mm (13") H
Interior Drawer Dimensions:
Left Hand Drawer:
914mm (36") L x 461mm (18.2") W x 208mm (8.2") H
Right Hand Drawer:
914mm (36") L x 373mm (14.7") W x 208mm (8.2") H
Weight:
82.4kg (181.7lbs)
Load Rating:
113Kg (250lbs) per Drawer
Special Notes:
Supplied with a T-wrench and custom socket for operating the wheel winder through the drawer system.
Front Runner
FRONT RUNNER LAND ROVER DISCOVERY 3/4 LR3/LR4 DRAWER KIT -SSLD004
$3,488.00
$3,876.00
This drawer kit has 2 lockable drawers, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
113kg / 250 lb per drawer load carrying capacity.
High-strength bearing slides allows each drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
To create compartments within the drawers, add the optional steel Drawer Dividers. Helps organize and stop excessive movement of gear and supplies. Sold in pairs, these drawers can accommodate up to 4 dividers per drawer.
The deck is covered with a durable, UV resistant nylon pile black carpet detailed to complement the vehicles interior contours.
The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This drawer kit can be easily installed in minutes by attaching the supplied carabiners and turnbuckles to the vehicles existing mounting points and the drawer mounting brackets. Removing the drawers is just as easy.
The LAND ROVER DISCOVERY LR3 AND LR4 DRAWER KIT allows access to the spare wheel winder through an access "port" in the top deck. There is no need to remove the drawers to lower the spare.
All Front Runner Storage Systems are backed by a 2 year warranty.
*Please Note: Cub Packs, Flat Packs and Drawer Dividers are not included when purchasing this Drawer System and are sold separately.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR002)
1 x Land Rover Discovery LR3 & LR4 Drawer Deck Completion Set
2 x Push to Close latch with 2 keys per lock
3 x Accessory Channels
6 x Eye Nuts for Accessory Channel
1 x T Wrench with 2 custom sockets for wheel winder
Installation Hardware including 4 turnbuckles to secure unit to vehicle
Fitting Instruction
Materials used:
Aluminum - Accessory Channels & Sub Frame
Black powder coated steel - Drawer Bins & Frame
Carpet & Laminated plywood - Top Deck & Deck Set
Product Dimensions:
Closed:
972mm (38.3") L x 1230mm (48.4") W x 328mm (12.9") H
Open:
1896mm (74.7") L x 1230mm (48.4") W x 328mm (12.9") H
Interior Drawer Dimensions:
Left Hand Drawer:
914mm (36") L x 461mm (18.2") W x 208mm (8.2") H
Right Hand Drawer:
914mm (36") L x 373mm (14.7") W x 208mm (8.2") H
Weight:
80.3Kg (177lbs)
Load Rating:
113Kg (250lbs) per Drawer
Special Notes:
Supplied with a T-wrench and 2 custom sockets for operating the wheel winder through the drawer system.
Front Runner
FRONT RUNNER TOYOTA HILUX REVO DC (2016-CURRENT) TOURING DRAWER KIT -SSTH004
$3,293.00
$3,659.00
This drawer kit has 1 lockable drawer, 2 keys per lock, 3 tie down rails, 6 tie down rings, deck completion set, face completion set, brackets, all necessary installation hardware, and detailed fitment instructions.
180kg / 397lb drawer load carrying capacity.
Hold open feature: drawer locks open while parked on uneven surfaces.
High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base.
Provide peace of mind and security by locking away important travel items such as computers, smart phones and camera gear.
The flat deck incorporates three cargo attachment channels and 6 Tie Down Rings / Eye Nuts For Drawer System.
Customize your own storage configurations. Stack and secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo/Fridge Slides.
A fridge (footprint of 750mm x 425mm or smaller) can be installed on the left hand side of the drawer for access through a gullwing style window.
The right rear deck and back right side deck each have a cut out (215mm in diameter) to fit and secure a gas/propane bottle or similar shaped object.
The side decks are easily removable creating storage space between the drawers and vehicle for a variety of items such as tools, jumper cables, tow ropes, diving snorkels, masks, fins, kindling, barbeque skewers, etc.
To create a removable box option, use Cub Pack or Flat Pack inside the drawers. The Cub Pack or Flat Pack can be used to further organize and easily move gear in and out of a vehicle.
The deck is covered with a durable, UV resistant gray marine carpet detailed to complement the vehicles interior contours.
The nylon carpet insulates secured cargo from noise and vibration.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
No drilling is required when fitted without lift channels and when a standard canopy is used and tailgate is left in place.
If your vehicle has a canopy with a swing open door that has replaced the original tailgate, drilling 3 lifting channels (included) may be necessary.
All Front Runner Storage Systems are backed by a 2 year warranty.
*Please Note: Cub Packs and Flatpack Storage Boxes are not included when purchasing this Drawer System and are sold separately.
Note: The Deck Completion Set for this drawer kit requires modification when installed with an existing plastic load liner.
Features
Consists of:
1 x Front Runner Drawer unit (SSDR012)
1 x Toyota Hilux Revo DC (2016-Current) Touring Deck Completion Set (SSDS108)
1 x Drawer System Wing Set (SSWS004)
1 x Push to close latch with 2 keys per lock
3 x Accessory channels
6 x Eye Nuts for accessory channels
Installation Hardware includes 4 turnbuckles to secure unit to vehicle with standard canopy
Fitting Instruction
Materials used:
Black powder coated steel - Drawer Bins, Frame & Front Covers
Nylon Carpet & Laminated Plywood - Top Deck & Deck Set
Product Dimensions:
Overall Dimensions:
1510mm (59.5") L x 1604mm (63.2") W x 335mm (13.2") H
Drawer Internal Dimensions:
1100mm (43.3") L x 747mm (29.4") W x 208mm (8.2") H
Weight:
80.5kg (177.5lbs)
Front Runner
Front Runner Stainless Steel Water Tank for Ute Drawer System / 52l -WTAN037
$1,415.00
$1,572.00
A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system. This water tank is positioned below the drawer deck to utilize the concealed space between the back of the drawer and the vehicle to preserve needed cargo space. Includes a 12V pump.
Water Tank:A 52L stainless steel water tank that fits behind the Front Runner Ute drawer system.
This water tank is placed below the drawer deck to utilize the space between the back of the drawer and the vehicle.
All piping and fittings are provided to plumb the tanks contents to the front of the drawer system for ease of use.
Knocked out holes in the drawer's side panel plate accommodates the fittings and ensures that all the pipe work is neatly hidden.
Additionally a 12 volt electric pump is included to increase the outlet pressure and flow rate.
Water Pump:Features:
Built-in pressure switch automatically starts and stops pump instantaneously when discharge valve opens and closes.
Compact design and plug-in port fittings make installation easy.
Can run dry without damage and handle liquids up to 130° F (54° C).
No metal contact with liquid being pumped.
Ball bearing drive throughout pump and motor assures longer pump life.
Excellent self-priming capability. Pump may be located above the liquid level.
Powerful, permanent magnet motor with low current draw and long life brushes.
Consists of:1 x Stainless Steel Water Tank1 x Shut-off Valve1 x 12V Water PumpPipe KitInstallation HardwareWater Tank:Materials used:304 Stainless SteelProduct Dimensions:1065mm (41.9") W x 230mm (9.1") L x 285mm (11.2") HWeight:14.2kg (31.3lbs)Water Pump:Pump Specifications:12 Volts12.5 Liters per minute35psiProduct Dimensions:360mm (14.2") L x 135mm (5.3") W x 110mm (4.3") HWeight:2.13kg (4.7lbs)Approximate Total Product Weight:16.33kg (36lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTF051T FITS TOYOTA 4RUNNER 4TH GEN
$1,737.00
$1,930.00
This 1762mm/69.4" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Toyota 4Runner (4th Gen). It easily installs using the existing factory mounting points. No drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTF051T - Toyota 4Runner (4th Gen) Slimline II Roof Rack Kit - by Front Runner
Consisting of:
1 x FATF003 - Toyota 4runner (2002-2008) Foot Rails - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 30kg (65lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 34.4kg (75.7lbs)
Front Runner
FRONT RUNNER SLIMLINE II ROOF RACK KIT KRTC001L FITS TOYOTA CONDOR
$1,762.00
$1,958.00
This 1762mm/69.4" long full-size Slimline II cargo carrying roof rack kit for the Toyota Condor contains Slimline II Tray and Wind Deflector, as well as 6 Gutter Mount legs for mounting the Tray to the vehicle. It installs easily with no drilling required.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Features
KRTC001L - Toyota Condor Slimline II Roof Rack Kit - by Front Runner
Consisting of:
2 x LASS105 - No 5 Leg 190mm (Pair) - by Front Runner
1 x LASS106 - No 6 Leg 195mm (Pair) - by Front Runner
1 x RRSTD09 - Slimline II Tray - 1255mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 28kg (62lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width 450mm (18")
Length 1615mm (64")
Height 140mm (6")
Shipping Weight:
Weight 32.9kg (72.4lbs)
Front Runner
FRONT RUNNER TOYOTA TUNDRA (2022-CURRENT) SLIMSPORT RACK 40IN LIGHT BAR WIND FAIRING -RRAC264
$226.00
$251.00
Lightbar wind fairing for Toyota Tundra Crew Cab (2022-Current) Slimsport Roof Rack Kit / Lightbar Ready.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Features
Consists of:
1 x Toyota Tundra Crew Cab (2022-Current) Slimsport Rack 40" Light Bar Wind Fairing
1 x Fitting Instructions
Installation Hardware
Materials used:
Black power coated steel
Product Dimensions:
1311mm (51.6") L x 241mm (9.5") W x 143mm (5.6") H
Weight:
4.2kg (9.3lbs)
Front Runner
Front Runner Ute Roll Top Slimline II Load Bed Rack Kit / 1425(W) x 1358(L)...
$1,553.00
$1,726.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 4 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT001T - Bakkie Roll Top Slimline II Load Bed Rack Kit / 1425(W) x 1358(L) - by Front Runner
Consisting of:
2x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material used:
Black epoxy powder - coated T6 aluminium
High strength steel
Approximate Installed Weight: 27.05kg (59.63lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts. To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 455mm (18"); Length: 1610mm (63"); Height: 235mm (9")
Shipping Weight:
Weight: 27.82kg (61lbs)
Front Runner
Front Runner Ute Roll Top Slimline II Load Bed Rack Kit / 1475(W) x 1762(L)...
$2,050.00
$2,278.00
This kit creates a full-size rack that sits above your Pickup Truck's load bed when fitted with a Roll Top Cover. This Slimline II cargo carrying rack kit contains the Slimline II tray (1475mm x 1762mm) and 6 Pickup Roll Top Leg Mounts that fit into the existing factory/OEM tracks in your Roll Top Cover.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Features
KRRT028T - Pickup Roll Top Slimline II Load Bed Rack Kit / 1475(W) x 1762(L) / Tall - by Front Runner
Consisting of:
3 x LASS033 - Pick Up Roll Top Leg Mount / Medium (Pair)
1 x RRSTM09 - Slimline II Tray - 1475mm(W) X 1762mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
High strength steel
Approximate Installed Weight: 35.4kg (78.0lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicles roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicles rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:
Width: 450mm (18.0")
Length: 1730mm (68.0")
Height: 240mm (9.0")
Shipping Weight:
36.4kg (80.0lbs)
Front Runner
Front Runner Front Face Plate Set for Ute Drawers Large SSCA049
$33.00
$37.00
A set of Front Face Plates to complete the front of the 6 Wolf Pack Drawer / Wide Incl. Boxes or Ute Drawers / Large.
The left hand Face Plate has 4 knock-outs that can be used to fit electrical switches for lighting, compressors or water pumps.
The right hand Face Plate has 2 knock-outs that accommodate water connectors and taps for various Front Runner water containers or tanks such as the Stainless Steel Water Tank for Ute Drawer System / 52l that can be fitted and fixed to the rear of the 6 Wolf Pack Drawer / Wide Incl. Boxes or Ute Drawers / Large.
This Front Face Plate Set is black powder coated to match the drawer systems.
Front Face Plates are used when a Deck Completion Set is unavailable for your ute or you have chosen not to fit the Deck Completion Set.
Fits to your ute drawer system with the supplied hardware.
Features
Consists of:
1 x Set of Face Plates (1 Left Hand side & 1 Right Hand side)
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated steel
Product Dimensions:
78mm (3.1") L x 135mm (5.3") W x 280mm (11") H (per Single Face Plate)
Weight:
1.1kg (2.4lbs) (per Pair)
Front Runner
Front Runner 6 Wolf Pack Pro Drawer / Wide Incl. Boxes -SSWO009
$2,897.00
$3,219.00
Neatly organize and easily access all your gear with this innovative drawer-slide system. This kit was specifically designed for the Wolf Pack Pro (the ultimate plastic storage box) and includes six Wolf Pack Pro load bins so you can store and transport all your gear.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction
Materials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - FrameCarpet & Laminated plywood - Top Deck
Product Dimensions:Overall Dimensions:1252mm (49.3") L x 1083mm (42.6") W x 310mm (12.2") H
Drawer Inner Dimensions:1197mm (47.1") L x 1031mm (40.6") W x 230mm (9.1") H
Drawer Unit Open Dimensions:2163mm (85.2") L x 1083mm (42.6") W x 310mm (12.2") H
Weight:67Kg (147.7lbs)
Load Rating:113Kg (250lbs)
Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
Front Runner
Front Runner 6 Wolf Pack Drawer / Wide Incl. Boxes -SSWO008
$2,760.00
$3,067.00
If Front Runner does not offer a vehicle-specific drawer kit for your make and model vehicle, consider this universal drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.
This removable box drawer includes:
1 drawer slide
6 Front Runner Wolf Packs
Lock and keys
3 tie-down rails
6 tie-down rings
Brackets
All necessary installation hardware
Detailed fitment instructions
Front Runner Wolf Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These clip-to-close, stackable, and durable SBOX008 storage containers are made from black, high-strength plastic and have integrated grips for easy carrying. Insert SBOX027 in the SBOX008 as an adjustable compartment padded liner to further protect camera gear, kitchenware, and other fragile items (Front Runner Flat Packs sold separately).
Drawer load carrying capacity: 113kg / 250 lb.
Hold open feature: drawer locks open while parked on uneven surfaces. High-strength bearing slides allow the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear.
The flat deck incorporates three cargo attachment channels and 6 RRAC012. Customize your own storage configurations. Stack and secure luggage, SBOX008, SBOX001, aluminum boxes, and other storage containers to the top deck using STRA034 or other straps.
The deck above the drawers can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV-resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicles existing mounting points. Removing the drawers is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed/load bed cover. All Front Runner Storage Systems are backed by a 2-year warranty.
NOTE: These 'universal' drawers do not come with a vehicle-specific deck completion set or faceplates.
Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:
1 x Drawer unit with 1 Opening Drawer
1 x Push to close latch with 2 keys
3 x Accessory Channels
6 x Tie Down Rings
6 x Low Lid Wolf Packs
Installation Hardware
Fitting Instruction
Front Runner
Front Runner 6 Cub Pack Drawer / Wide Incl. Boxes -SSAM014
$2,451.00
$2,723.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.This removable box drawer includes 1 drawer slide, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These stackable and durable SBOX001 storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 RRAC012.
Customize your own storage configurations. Stack and secure luggage, SBOX031s, SBOX001s, aluminum boxes and other storage containers to the top deck using STRA034 or other straps. The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use. All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These ''universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 950mm (37.4") W x 285mm (11.2") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
Front Runner
Front Runner 6 Cub Box Drawer w/ Cargo Sliding Top -SSAM012
$1,691.00
$1,879.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This 6 Cub Box Drawer with Cargo Sliding Top kit includes both a sliding drawer, sliding deck, 2 rotating latch mechanisms and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths.
These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear spread across the surface. Fitted with a latching mechanism, both drawer and slide are kept in place when in the closed position.
Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck slide using STRA034 or other straps as well as RAIL007 and RRAC012. The deck is finished with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo, while insulating against noise and vibration.
Finished with the same durable black powder coating as the Front Runner Slimline II Roof Rack The Front Runner 6 Cub Box Drawer with Cargo Sliding Top can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - FrameNylon Carpet & Laminated Plywood - Top Drawer BaseProduct Dimensions:969mm (38.1") L x 940mm (37") W x 350mm (13.8") HInterior Drawer Dimensions:Full Size:944mm (37.2") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Bottom Drawer Sections:944mm (37.2") L x 440mm (17.3") W x 45mm (1.8") HTop Drawer:948mm (37.3") L x 893mm (35.2") W x 71mm (2.8") HWeight:68.04kg (150lbs)Load Rating:113kg (250lbs) Interior Drawers113kg (250lbs) Top DrawerSpecial Notes:The drawer unit has rotating latches to secure both the top and bottom drawers in place.
Front Runner
Front Runner 4 Wolf Pack Pro Storage System Kit/ Asymmetric -SSWO011
$1,102.00
$1,225.00
This smart, asymmetrical storage solution enables your vehicle to house the four included Wolf Pack Pro boxes. It takes only minutes to install, and then you can slide the Wolf Pack Pro boxes into place. This is a spring-loaded system so the boxes won’t vibrate or move excessively. The clean Bamboo deck can hold a max weight of 80 kg and is the perfect place for your fridge and slide.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The top deck is finished with a clean Bamboo wood finish.Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
Consists of:1 x Storage Unit2 x Top Decks4 x Wolf Pack ProInstallation HardwareFitting Instructions
Materials used:Black powder coated mild steel - FrameBamboo - Top Drawer Base
Product Dimensions:975mm (38.4") L x 975mm (38.4") W x 315mm (12.4") H
Wolf Pack Pro Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Weight:50.6kg (111.6lbs)
Special Note:80kg (176.4lbs) top deck load capacity
Front Runner
Front Runner 4 Cub Box Drawer AND Fridge Slide Combo -SSAM005
$2,678.00
$2,976.00
If Front Runner doesn’t offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This 4 Cub Pack Fridge Slide drawer kit includes 2 drawer slides with 1 small storage tray, 1 fridge slide tray, rotating latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths.
These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. Strap “spare” SBOX001 to the drawer deck or secure them to a Front Runner Slimline II Rack. High-strength bearing slides allows each drawer and Fridge Slide to extend nearly 100% from the anchored base. The Fridge Slide extends at the lower level to accommodate various size fridges from 40L to 80L.
The small storage tray in the bottom left hand drawer allows you to store additional items. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear across the surface. Fitted with a latching mechanism, all drawers and slide are kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the top deck slide using STRA034 or other straps as well as RAIL007 and RRAC012.
The deck is lined with a durable, UV resistant nylon pile carpet detailed to compliment each vehicle’s interior contours. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as the Front Runner Slimline II Rack. This Front Runner 4 Cub Pack Drawer Fridge Slide Combo can be easily installed.
Depending on your vehicle’s make and model drilling may be required. All Front Runner Storage Systems are backed by a 2 year warranty. Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Drawer unitFitting instructionsMaterials used:Black powder coated mild steel - Drawer unitNylon Carpet & Laminated Plywood - Top DeckProduct Dimensions:944mm (37.2") L x 935mm (36.8") W x 618mm (24.3") HInterior Drawer Dimensions:Left Hand Top Drawer:877mm (34.5") L x 317mm (12.5") W x 46mm (1.8") HLeft Hand Bottom Drawer (with Storage Tray):828mm (32.6") L x 258mm (10.2") W x 149mm (5.9") HFridge Slide:882mm (34.7") L x 519mm (20.4") W x 37mm (1.5") HWeight:96.16kg (212lbs)Load Rating:113kg (250lbs) per drawer and fridge slide150kg (331lbs) Distributed over the Top DeckSpecial Notes:The Drawer system has 3 different sized storage compartments all with rotating latches to secure drawers in place.
Front Runner
Front Runner 4 Cub Box Drawer / Wide -SSAM009
$1,012.00
$1,124.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into vehicles with a smaller than usual cargo area.
This 4 Cub Box Drawer / Wide kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
Fitted with a latching mechanism, the drawer is kept in place when in the closed position. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear across the surface. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack. The 4 Cub Box Drawer / Wide can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet & Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7") L x 940mm (37") W x 261mm (10.3") HInterior Drawer Dimensions:Full Size:629mm (24.8") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Sections (Left & Right Hand Side):629mm (24.8") L x 440mm (17.3") W x 45mm (1.8") HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.
Front Runner
Front Runner 4 Cub Box Drawer / Narrow -SSAM008
$1,069.00
$1,188.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into narrow vehicles such as the Land Rover Defender 90/110 (1983-2016), or vehicles where the wheel arches protrude further than usual.
This 4 Cub Box Drawer / Narrow kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. Fitted with a latching mechanism, the drawer is kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack The 4 Cub Box Drawer / Narrow can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty. Installation of this product requires a Rivnut tool.
*Please Note: The 4 Cub Box Drawer / Narrow does not come with an upper flat deck, deck completion set or face plates as standard fitment. The wood included in the drawer is for transportation/shipping purposes only. This “universal” drawer is designed to be a fully customized fitment.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7") L x 696mm (27.4") W x 262mm (10.3") HInterior Drawer Dimensions:882mm (34.7") L x 646mm (25.4") W x 45mm (1.8") HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.
Front Runner
Front Runner Cargo Slide/Fridge Slide / 80L to 90L -FSLI006
$530.00
$589.00
This slide out tray offers easy access to a fridge (80L to 90L) and/or other stored gear with a low profile, rigid design. Product Dimensions: 942mm (37.1") L x 578mm (22.8") W x 85mm (3.3") H
This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space.
Mountable to any flat surface, including Front Runner drawer systems and pick-up truck beds.
Mounting holes are predrilled.
High strength bearing drawer slides allows the tray to extend nearly 100% from the anchored base.
Unique design keeps the slide rattle free when closed.
A clip latch securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Mounting hardware included for wood and metal surfaces.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.
Consists of:1x Fridge SlideInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:Overall / Closed Dimensions:942mm (37.1") L x 578mm (22.8") W x 85mm (3.3") HOpened Dimensions:1858mm (73.1") L x 578mm (22.8") W x 85mm (3.3") HInner Dimensions:884mm (34.8") L x 507mm (19.9") W x 64mm (2.5") HWeight:18.2Kg (40.1lbs)Load Rating:113Kg(250lbs)
Front Runner
Front Runner Cargo Slide/Fridge Slide / Large 75L- FSLI022
$494.00
$549.00
The most efficient way to access your fridge and/or other heavy gear while maximizing packing space in your vehicle of pickup’s load bed. This low-profile, heavy-duty slide is large enough to hold a fridge (75L/19.8 gal or smaller) or other gear and features a hold-open mechanism and high-strength bearings that allow the tray to extend nearly 100% from the anchored base for full access.
This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space.
Mountable to any flat surface, including Front Runner drawer systems and pickup truck beds.
The slide-out extension gives you an additional 470mm/18.5" x 325mm/12.8" work surface.
This heavy-duty slide is big enough to hold a fridge (75L/19.8 gal or smaller).
Mounting holes are predrilled.
High-strength bearing drawer slides allow the tray to extend nearly 100% from the anchored base.
The unique design keeps the slide rattle-free when closed.
A latching arm securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather-resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Four (4) Dometic Strap Kit are included to secure your fridge to the fridge slide.
Mounting hardware included for wood and metal surfaces.
This Cargo Slide/Fridge Slide is suited to fit Dometic CFX3 75DZ Dual Cooler/Freezer.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.
Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:Overall Dimensions:920mm (36.2") L x 580mm (22.8") W x 95mm (3.7") H
Closed Dimensions:920mm (36.2") L x 580mm (22.8") W x 95mm (3.7") H
Open Dimensions:1810mm (71.6") L x 580mm (22.8") W x 95mm (3.7") H
Internal Dimesions:890mm (35") L x 520mm (20.5") W x 52mm (2.05") H
Weight:19.25kg (42.44lbs)
Load Rating:113kg (249lbs)
Front Runner
Front Runner Cargo Slide/Fridge Slide / Medium 55L- FSLI021
$404.00
$449.00
The most efficient way to access your fridge or other heavy gear while maximizing packing space in your vehicle or pickup's load bed. This low-profile, heavy-duty slide is big enough to hold a fridge (55L/14.5 gal or smaller) and features a hold-open mechanism and high-strength bearings that allow the tray to extend nearly 100% from the anchored base, offering full access.
Mountable to any flat surface, including Front Runner drawer systems and pickup truck beds.
The slide-out extension gives you an additional 470mm/18.5" x 325mm/12.8" work surface.
This heavy-duty slide is big enough to hold a fridge (55L/14.5 gal or smaller).
Mounting holes are predrilled.
High-strength bearing drawer slides allow the tray to extend nearly 100% from the anchored base.
The unique design keeps the slide rattle-free when closed.
A latching arm securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather-resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Four (4) Dometic Strap Kit are included to secure your fridge to the fridge slide.
Mounting hardware included for wood and metal surfaces.
This Cargo Slide/Fridge Slide is suited to fit Dometic CFX3 55 Cooler/Freezer and Dometic CFX3 55IM Cooler/Freezer w/Rapid Freeze Plate.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.
Consists of:1 x Fridge SlideInstallation HardwareFitting Instructions
Materials used:Black powder-coated steel
Product Dimensions:Overall Dimensions:761mm (30") L x 540mm (21.3") W x 95mm (3.7") H
Closed Dimensions:761mm (30") L x 540mm (21.3") W x 95mm (3.7") H
Open Dimensions:1437mm (56.6") L x 540mm (21.3") W x 95mm (3.7") H
Internal Dimesions:720mm (28.3") L x 466mm (18.3") W x 52mm (2.05") H
Weight:18.34kg (40.4lbs)
Load Rating:90kg (198lbs)
Front Runner
Front Runner Cargo Slide/Fridge Slide / Small 35L to 45L- FSLI020
$359.00
$399.00
Access your fridge (35L to 45L/9.2 gal to 11.9 gal) and/or other stored gear with this low-profile, heavy-duty slide. It features a hold-open mechanism and high-strength bearings that allow the tray to extend nearly 100% from the anchored base, offering full access.
Mountable to any flat surface, including Front Runner drawer systems and pickup truck beds.
The slide-out extension gives you an additional 425mm/16.7" x 277mm/10.9" work surface.
This heavy-duty slide is big enough to hold a fridge (35L to 45L/9.2 gal to 11.9 gal).
Mounting holes are pre-drilled.
High-strength bearing drawer slides allow the tray to extend nearly 100% from the anchored base.
The unique design keeps the slide rattle-free when closed.
A latching arm securely locks the drawer in the closed position.
Features a hold open mechanism to prevent the slider from closing when the vehicle is parked on uneven surfaces.
Finished in the same durable weather-resistant black powder coating as the Front Runner Racks.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Four (4) Dometic Strap Kit are included to secure your fridge to the fridge slide.
Mounting hardware included for wood and metal surfaces.
This Cargo Slide/Fridge Slide is suited to fit Dometic CFX3 35 Cooler/Freezer and Dometic CFX3 45 Cooler/Freezer.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.
Consists of:1 x Cargo Slide/Fridge SlideInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:Overall Dimensions:718mm (28.3") L x 471mm (18.5") W x 95mm (3.7") H
Closed Dimensions:739mm (29.1") L x 471mm (18.5") W x 95mm (3.7") H
Open Dimensions:1428mm (56.2") L x 471mm (18.5") W x 95mm (3.7") H
Internal Dimesions:697mm (27.4") L x 410mm (16.1") W x 53mm (2.05") H
Weight:14.23kg (31.4lbs)
Load Rating:90kg (198lbs)
Front Runner
Front Runner Cargo Slide/Fridge Slide / 80L to 90L- FSLI001
$395.00
$439.00
This slide out tray offers easy access to a fridge (80L to 90L) and/or other stored gear with a low profile, rigid design. Product Dimensions: 580mm (22.8") W x 920mm (36.2") L x 65mm (2.6") H
This slide system makes accessing your fridge or other heavy gear quick and simple while using minimal space.
Mountable to any flat surface, including Front Runner drawer systems and pick-up truck beds.
Mounting holes are predrilled.
High strength bearing drawer slides allows the tray to extend nearly 100% from the anchored base.
Unique design keeps the slide rattle free when closed.
A swivel latch securely locks the drawer in the closed position.
Finished in the same durable weather resistant black powder coating as the Front Runner Slimline II Roof Rack.
Can have many other uses, like carrying tools, boxes, or other adventure gear.
Mounting hardware included for wood and metal surfaces.
Note: Fridges or other storage containers are not included when purchasing this Cargo Slide and are sold separately.
Consists of:1x Fridge Slide1x L-Bracket latchBolt kitMaterials used:1.8mm (0.07") Black powder-coated steelProduct Dimensions:Overall/Closed Dimensions:920mm (36.2") L x 580mm (22.8") W x 65mm (2.6") H
Open Dimesions:1830mm (72") L x 580mm (22.8") W x 65mm (2.6") HInternal Dimesions:880mm (34.6") L x 508mm (20") W x 25mm (1") H
Weight:16.7kg (36.8lbs)Maximum load capacity:100kg (220.5lbs)
MSA
MSA 4X4 TRITON MQ LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA TRITON MQ LEFT STORAGE DRAWER SYSTEM-E1350-TRITMQ-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E930A GENERIC RIGHT STORAGE DRAWER SYSTEM
$1,239.30
$1,377.00
MSA E930A GENERIC RIGHT STORAGE DRAWER SYSTEM -E930A-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 433mm
MSA
MSA 4X4 E1030 GENERIC DOUBLE STORAGE DRAWER SYSTEM
$2,529.01
$2,810.01
MSA 4X4 E1030 GENERIC DOUBLE STORAGE DRAWER SYSTEM-E1030-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit(includes floor extension)
Left Wing Kit
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Double Drawer Joining Bolts
Double Width Trim
Double Drawer Joining Wire
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4x4 E1100 GENERIC LEFT STORAGE DRAWER SYSTEM
$1,343.70
$1,493.00
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1100mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1000mm
Internal drawer width = 525mm
MSA
MSA 4X4 PRADO 120 SERIES RIGHT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 200 SERIES LEFT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4X4 PRADO 150 SERIES RIGHT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
SUITS: Toyota Landcruiser Prado 150 Series GXL 7 Seat Model/Kakadu/VX (No removable front face panel)
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 200 SERIES RIGHT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
Suits Toyota Landcruiser 200 Series GXL/VX/Sahara
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 453mm
MSA
MSA 4X4 AMAROK LEFT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
Suits Volkswagon Amarok 2H, Volkswagen Amarok
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Simgle Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4x4 E830 GENERIC LEFT STORAGE DRAWER SYSTEM
$1,253.70
$1,393.00
MSA E830 GENERIC LEFT STORAGE DRAWER SYSTEM-E830-LEFT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Left Drawer Module
Left Fit Kit (includes floor extension)
Left Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 830mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 600mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 715mm
Intenral drawer width = 525mm
MSA
MSA 4x4 E1350 GENERIC RIGHT STORAGE DRAWER SYSTEM
$1,437.30
$1,597.00
MSA E1350 GENERIC RIGHT STORAGE DRAWER SYSTEM -E1350-RIGHT-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS +10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 LANDCRUISER 300 SERIES LEFT STORAGE DRAWER
$1,485.90
$1,651.00
Suits Toyota Landcruiser 300 Series GXL/VX/Sahara
MSA LANDCRUISER 300 SERIES LEFT STORAGE DRAWER-41011
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1045mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 510mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 930mm
Internal drawer width = 433mm
MSA
MSA 4X4 HILUX 8TH GEN LEFT STORAGE DRAWER SYSTEM-E1350
$1,437.30
$1,597.00
Suits Toyota HiLux 8th Gen
MSA HILUX 8TH GEN LEFT STORAGE DRAWER SYSTEM-E1350-HILUX8-LE-COM
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
XTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 1365mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 1250mm
Internal drawer width = 453mm
MSA
MSA 4X4 PRADO 120 SERIES LEFT STORAGE DRAWER SYSTEM
$1,264.50
$1,405.00
Suits Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande
MSA PRADO 120 SERIES LEFT STORAGE DRAWER SYSTEM-E930-PRA120-LE-COM
SUITS: Toyota Landcruiser Prado 120 Series 7 Seat GXL/Grande (models with rear aircon)
Designed from the ground up, the way a quality 4WD storage system should be.
Sick of shoving everything loosely in the back of a vehicle? Why not get organised with an MSA 4X4 Storage Drawer System.
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology Now fitted with fully sealed, stainless steel bearings with Nylon rollers as standard. Offering a quieter, smoother operation under heavy loads and saving up to 3kg per Drawer Module. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed from aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
100% Drawer extension for complete access
Patented “Stay-Open Block”
Rust resistant sealed bearings with Nylon rollers
Internal LED Light Strip
Safe and secure lock system
Dust resistant seal
Stainless steel fasteners
Removable wing and face panels
INCLUDES:
Complete wing kits
Cargo Barrier mounting points
Child restraint points
MSA 4X4’s Lifetime Guarantee
PARTS INCLUDED:
Right Drawer Module
Right Fit Kit (includes floor extension)
Right Wing Kit
Single Width Trim
EXTERNAL DIMENSIONS
+10mm for rear anchor bolts
Overall drawer length = 945mm (including handle lock)
Overall drawer height = 275mm
Overall single drawer width = 530mm (no wings)
INTERNAL DIMENSIONS
Usable drawer height = 215mm (upto under side of the top deck)
Drawer height = 211mm
Internal drawer length = 830mm
Internal drawer width = 453mm
nomadiQ
THE ORIGINAL NOMADIQ BBQ - NMQ-35113
$409.00
$499.00
Experience effortless outdoor cooking with the Original nomadiQ BBQ – NMQ-35113, a premium lightweight, dual-zone gas BBQ crafted for travel, camping, and open-air dining. With a sleek foldable design, 60-second setup, and the power to cook for up to 8 people, it combines performance with portability. At just $439, it’s the ideal companion for those who value quality, convenience, and adventure.
What’s in the Box?
Everything you need to get cookin’ - just add gas.
Here’s what’s inside:
The nomadiQ BBQ (foldable, dual-zone, gas-powered)
Gas hose with pressure regulator
2x drip trays
Shoulder carry strap
Quick-start manual
DELIVERY INFORMATION - PLEASE READ
✅ Lock in current $439 pricing by pre-ordering now✅ Guaranteed availability when next shipment arrives✅ First in line for delivery (3-5 days from order)✅ No payment until your BBQ is ready to ship*✅ Full refund available if you change your mind before shipping
All packed in a recyclable box. You’ll be up and cooking in under 60 seconds.
The nomadiQ BBQ comes in a recyclable box complete with gas hose, pressure regulator, drip trays, shoulder strap, and a manual. Only the gas bottle is needed for hours of grilling and fun.
You can take this lightweight gas BBQ with you anywhere. It has two separate temperature zones and is easy to clean after use. As a true outdoorsman, you can lick your fingers with this compact BBQ hit.
TRAVELLERS STATE OF MIND: Ultimate Lightweight and Portable BBQ
We developed the nomadiQ BBQ with the outdoorsmen in mind. Total weight is only 12.5lb. It comes standard with a shoulder strap. The unique folding design makes it sleek and ultra-portable while being a powerhouse of a gas BBQ. We also offer a nomadiQ Pouch for your convenience.
UNLOCK, UNFOLD & CONNECT: The nomadiQ BBQ Folding Design
The nomadiQ BBQ has a one-of-a-kind Folding Design. The only thing you have to do is unlock, unfold, connect to a propane tank, and grill food within a minute. When you're done, you can easily clean, pack, and drive home after a beautiful day with friends or family.
MAXIMUM CONTROL: Dual and Separate Heating System
On both sides of the nomadiQ BBQ you can enjoy a grill plate of 730 cm² (total 1460 cm²). With two separate sides, this BBQ allows you to use only one or both sides, while controlling their temperatures individually using independently controlled burners.
EASY CONNECTION: Propane Gas Bottle
You can use every standard propane fuel tank available at hardware stores, outdoor suppliers, and bigger supermarkets.
✅ Portable & Lightweight✅ Dual-Zone Grilling✅ Order: 3-5 Days Delivery (Due to High Demand)✅ $50 - $100 cheaper than other Aussie retailers
SPECIFICATIONS
Weight: 7.4 kgDimensions: 46 × 50 × 21 cmColour: Charcoal Black, Petrol, Pretty Pink, Terra, Urban GrayGas type: PropaneMaterial: Aluminium, Powder Coating, Stainless steelPower: 9200 btuGrilling surface: 1460 cm² / 226 in²Safety approval: C-ETLCertification standard: ANSI Z21.89:2017 / CSA 1.18:2017Brand: nomadiQ
Why NomadiQ?
Because it just works – anywhere you go. The nomadiQ is the lightest and most compact gas BBQ on the market.
nomadiQ is the BBQ you take to the beach, the bush, or the backyard without a second thought. It’s lightweight, packs down small, and heats up fast. Two separate burners give you proper control – bacon on one side, eggs on the other.
No fuss. No heavy lifting. Just good food, good times, and no compromises.
And for $439, it’s a no-brainer.
Pre-order now to lock in this price and secure your spot in the delivery queue.
NomadiQ BBQ Warranty Summary
Coverage: Defects in material and workmanship under normal, private residential use.
Base & Grilling Shells: 5 years (2 years on paint; fading/discolouration not covered)
Stainless Steel Burner Tubes: 5 years
Aluminium Die-Cast Grates: 5 years
Plastic Components: 5 years (excluding fading/discolouration)
All Other Parts: 2 years
Lightforce
LIGHTFORCE BEAST 3 MODE LED DRIVING LIGHT-BEAST230PK
$999.00
$1,199.00
Conquer the night with the Lightforce Beast 3-Mode LED Driving Lights — built tough for serious off-roading. Switch between spot, flood, and Beast mode for unmatched visibility up to 1km ahead. Aussie-made, IP69K rated, and engineered for premium 4WD performance. Now only $999 a pair.
What’s in the Box?
2 x BEAST LED Driving Light
2 x Lightforce BEAST Clear Filter
2 x Lightforce BEAST Amber Filters
2 x Reversible mounting bracket
2 x 4 pin waterproof adaptor
1 x User instructions
CHANGE BEAM PATTERNS WITH THE PUSH OF A BUTTON
Ensuring you are in command of any situation with confidence, BEAST has a unique 3-mode operation, allowing effortless switching between spot, flood and BEAST mode all from the comfort of your driving seat.
3 MODES IN 1
Spot: 1 LUX @ - 1497M DISTANCE - 60M WIDE
Flood: 1 LUX @ - 778M Distance - 140M Wide
Beast: 1 LUX @ - 1375M Distance - 140M Wide
Tame your terrain with BEAST’s SPOT beam pattern. Ideally suited for those who require a long-distance LED driving light with a more focused beam pattern. The concentrated white light will provide increased visibility when wanting to see as far as you can at night.
AN UNRIVALLED DRIVING EXPERIENCE
Whether you're traversing long terrains or embarking on the next thrilling adventure, BEAST guarantees the ultimate driving experience. Its reliability and precision, make it the ideal companion for those who seek performance without compromise. Elevate your driving journey with BEAST, where every detail is designed to exceed your expectations.
BOLD, RUGGED, EVOLVED
When it comes to BEAST, we leave no room for compromise. Each component, and every detail has been scrutinised and perfected to deliver an unparalleled driving experience. By adhering to our rigorous design principles, BEAST ensures that it not only meets but exceeds expectations, making it an Australian Made driving light that embodies uncompromising quality.
REAR BASH PLATE
Eye catching, military inspired accessory bash plate
HARD COATED LENS
Extremely impact resistant and durable
BLACK REFLECTOR MASK
Provides a class leading look and feel
SLIMLINE FOOTPRINT
Almost half the weight of other driving lights
PREMIUM COATINGS & FINISHING
Chemical, UV and salt resistant, tested to exceed Australian standards
GORE® MEMBRANE
Genuine Gore® waterproof membrane with mechanical seal
ALUMINIUM HOUSING
Durability of the highest degree to withstand the hardest of conditions
TESTED BEYOND THE EXTREME
IP69K INGRESS PROTECTION
DUST, PRESSURISED STEAM, 1.5M DEEP SUBMERSION
RUNS SAFELY IN -40°C TO 70°C HEAT
WORKS IN HEAT SPIKES UP TO 125°C AND WHEN FROZEN SOLID
SURVIVES IK16 RATED IMPACTS
IMPACT ESTIMATE OF 400G ROCK AT 100KPH OR 1KG AT 60KPH
PASSES MIL-STD-810H 514.4 VIBRATION AND SHOCK TEST US MILITARY STANDARD FOR OFFROAD VEHICLES
IEC 60068-2-52 SALT SPRAY AND RUST RESISTANT
SURVIVES 150,000 POWER CYCLES
LASTS 10,000 HOURS OF CONTINUOUS RUNNING
LEDS RATED TO 50,000 HOURS LIFESPAN
ASTM D3359 TOUGH COATING SCRATCH TEST
CHEMICAL RESISTANT MATERIALS TO UN ECE.R149
SURVIVES PETROL, BRAKE FLUID, MEK AND PAINT SOLVENTS
IEC 60068-2-5 SOLAR AND UV RESISTANT LENS
EMI IMMUNITY TO UN ECE.R10
LOW RADIO EMISSIONS TO CISPR25
ROHS COMPLIANT MATERIALS
NON-HAZARDOUS SUBSTANCES
RCM, CE, AND FTC COMPLIANT
AU/NZ, EU AND USA APPROVALS RESPECTIVELY
THE AUSTRALIAN-DESIGNED, ENGINEERED, TESTED AND MANUFACTURED BEAST LED DRIVING LIGHT BY LIGHTFORCE FUSES MILITARY PRACTICALITY AND RUGGEDNESS WITH BOLD AND UNIQUE DESIGN STYLING.
Built to endure and offer versatility in the most extreme driving conditions, it surpasses global test standards for durability and longevity, leading us to consider it the most rigorously tested Australian made driving light on the market, ensuring you are in command of any situation with confidence.
With its unique 3-mode operation, effortlessly switch between spot, flood and a special BEAST mode all from the comfort of your driving seat.
BOASTING:
Improved peripheral vision, assisting a safe drive
Warm white colour reduces glare and eye strain
Consistent and precise beam patterns for driving with confidence on any road type
Slimline footprint and lightweight
Countless mounting opportunities for seamless vehicle integration
A hard coated lens that’s extremely impact resistant and durable
Evolve your driving experience and unleash the wild your way with BEAST by Lightforce.
KEY BENEFITS
Globe Tech: LED
Number of LEDs: 36
Distance: 1 lux at: 1497m
Effective Lumens: 10,275 / 7,826 / 13,269lm
Raw Lumens: 16,496 / 11,025 / 19,965lm
Colour Temperature: 5700K
CRI: 70
Current Draw: 11.2 / 6.5 / 13Amps @ 13.2V
Voltage: 13.2V
Wattage: 149W
Ingress Protection Rating: IP69K
Beam Type: 3 Mode
Diameter: 230mm
Candella: 1,105,100 / 302,740 / 945,300cd
Weight: 2.2kg / 4.9lb
Warranty: 5 Years
TJM
TJM COMPRESSOR BUNDLE
$799.00
Master every terrain with the TJM Compressor Bundle — your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation. Designed for serious 4WDers, this rugged setup delivers power, precision, and convenience — all for just $799. Limited-time offer.
What’s in the box?:
TJM Pro Series Twin Air Compressor – $789
TJM Tyre Inflation Kit – $99
TJM Pro Series Airline Kit – $85
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Built for high-demand performance, the TJM Pro Series Twin Air Compressor delivers an industry-leading 170LPM flow rate. Its dual motor design, convection cooling (patent pending), and hard-anodised internals ensure powerful inflation under pressure. Encased in a robust anodised aluminum body, it’s made to last.
Key Benefits:
170LPM fast inflation power
Dual motor with independent fail-safe operation
Vertical or horizontal mounting flexibility
Integrated 0.48L air tank and multiple ports for lockers or tools
Durable anodised alloy construction
3-year warranty
Specifications
Flow Rate: 170LPM
Tyre Inflation Time: 10–40 PSI for 285/75/R16
Ports:
4 × 1/8” BSPT (Pro Locker, pressure switch)
5 × ¼” BSPT (hose connector)
1 × 1/8” NPT (relief valve)
Air Tank: 0.48L with integrated extrusion
Bore Size: 48mm
Cooling System: Internal fan with convection cooling
Fuse Rating: 2 × 40A (ANS type)
Power Supply: 12V
Mounting: Vertical or horizontal
Weight: 14.60 kg
TJM TYRE INFLATION KIT
SKU: 013COMPDTIAARetail Price: $99.00
Engineered for ease and precision, the TJM Tyre Inflation Kit features a backlit digital display, 600mm rubber-reinforced hose, and robust brass fittings. A bleed valve and broad inflator button give you full control for accurate tyre management in any conditions.
Key Benefits:
Digital and analogue gauge options
Multiple units: PSI, KPA, Bar, Kgf/cm
Built-in bleed valve for easy deflation
Heavy-duty brass fittings with latch-type chuck
Wide compatibility with Nitto and US fittings
Specifications
Gauge Type: Digital and analogue
Digital Display Diameter: 60mm
Display Colour: Orange
Measuring Range: 5–200 PSI
Pressure Capacity: 200 PSI
Units: PSI, KPA, Kgf/cm², Bar
Fittings:
Brass tyre chuck (latch type)
Nitto & US-style air fittings
Hose: 600mm reinforced rubber
Weight: 1.16 kg
TJM PRO SERIES AIRLINE KIT
SKU: 013COMPAKNAARetail Price: $85.00
From tyre inflation to powering pneumatic tools, the TJM Airline Kit is your all-in-one air solution. It includes a 6m reinforced hose with quick-connect fittings, multiple inflation needles, an air blow gun, and a durable PVC storage case for organized use on the go.
Key Benefits:
6m rubber-reinforced hose with male/female Nitto fittings
Multiple inflation accessories for tyres, toys, and tools
Air blow gun with fittings for dust/off-road cleaning
Convenient storage bag for portability
Specifications
Hose Length: 6m
Hose Type: Rubber-reinforced with male/female Nitto fittings
Included Accessories:
Air blow gun with male Nitto fitting
Female Nitto one-touch fitting (1/4” BSPT thread)
Tyre inflation chuck
3 inflation needles (large, small, rubber tip)
Short air blow gun tip
PVC storage bag
Weight: 1.82 kg
Alpine
Alpine 9" Halo9 Receiver With Maestro, Wireless Apple Carplay + Wireless Android Auto -Ilx-F509Ai
$1,349.00
$1,599.95
Alpine’s ethos of excellence continues in the next generation of Halo9. The iLX-F509Ai introduces industry-first innovations, along with a stunningly beautiful WXGA display, Hi-Res Audio specifications and advanced wireless connectivity.
Employing an ultra-high-quality WXGA display with 2.7 million pixels and a revolutionary laminated construction, image performance is of the highest standard, reproducing life-like razor sharp images with remarkable contrast and colour vibrancy. High-definition video from USB or HDMI sources has never looked so good.
Wireless Apple CarPlay and Android Auto, brings your smartphone and a wide-range of apps to the dashboard. Get directions, make calls, send and receive messages and listen to high-resolution streaming music all without a cable in sight.
The iLX-F509Ai brings the concert to the cockpit with Hi-Res Audio and LDAC wireless technology, letting you play high-resolution music via USB, or streaming via smartphone music services and apps revealing the original recording the way the artist intended.
With the world’s first built-in Class-D amplifier the iLX-F509Ai reinvents head unit power, delivering the richness and acoustic crescendos of virtually any music style and live performances through any loudspeaker.
What’s more, with a range of simple sound settings and MediaXpander you can make your cabin space and music experience come alive at touch of the display.
Satisfying enthusiasts and pro-users an advanced tuning mode is available with a 56-Band Parametric EQ, digital crossover and time correction enabling unparalleled system tuning, vehicle sound adaptation and personalisation.
With unrivalled technology and connectivity, as well as impeccable visual clarity and high-resolution audio, the iLX-F509Ai is a magnificent centrepiece for any dashboard—bringing the emotion of music and pure enjoyment to every drive.
Features
Radio / DAB Tuner
Preset Stations (FM: 3×12 / DAB: 3×12 / AM: 2×12)
Memory: Auto Memory
Seek Mode: Local, DX, Pre-Set, Service
RDS Functions: PI, PS, AF, TA, TP, PTY, NEWS, RADIO TEXT
DAB+/DMB Supported
DAB+ Slideshow Service
DLS (Dynamic Label Service)
DAB Service Following
RDS Fallback (where available)
Auto Ensemble/Service Memory
Service Search Function
PTY Search Function
Alphabet Search Function
BLUETOOTH®
Built-in BLUETOOTH® Module V4.2
HFP (Hands-Free Profile) Compatible
A2DP (Advanced Audio Distribution Profile) Compatible
AVRCP (Audio / Video Remote Control Profile) Ver.1.5 Compatible
Phone Book Synchronisation
Speed Dial: 4 Preset Memory (per phone)
Call History Display: Outgoing Calls / Incoming Calls / Missed Calls
Redial Function
Speech Volume Level Adjustment: (Outgoing and Incoming)
24 Menu Languages
Microphone Included
Works with iPhone®
Compatible with iPhones featuring a lightning connector
Various search functions and Album Artwork Display
Battery Charging
Connectivity
Works with Apple CarPlay wirelessly (requires CarPlay enabled iPhone)
Works with Android Auto wirelessly (requires Android Auto enabled handset) **Not all handsets supported and may require wired connection.
Navigation Function
Online navigation capability with Apple CarPlay and Android Auto compatible navigation apps
Includes GPS / Glonass enabled navigation antenna
USB Media Connection
2x USB cable included
USB port 1: data port / USB port 2: charging port
Music Playback: FLAC, MP3, WMA, AAC, WAV, APE compatible
Video Playback: MP4, MOV, FLV, MKV compatible
Supported Video Coding: MPEG-4/H.264 (MPEG-4/AVC)/MPEG-1/MPEG-2
Various search functions included
Sound Tuning
Bass Engine SQ and Bass Engine PRO sound tuning
Subwoofer Level Adjustment
4 V PreOut
10 Equalizer PreSets
13-Channel Parametric EQ x4 audio channels + 4-channel for subwoofer
6-Channel Digital Time Correction
2-way Digital Crossover
Independent Source Volume Level Setting
General
4x 50 Watts Class-D High Power Amplifier
9-inch Capacitive Touch-Screen WXGA Display (1280 x 720p)
Display angle adjustable after installation
3 PreOuts (4 V, Front / Rear / Subwoofer)
1 A/V AUX Input (3.5 mm micro jack)
1 HDMI input / 1 HDMI output
2 USB Ports (1x USB data port / 1x USB charging)
Steering Wheel Remote Control Ready
Vehicle Display Interface Ready (UART connection)
Remote Control Ready
2x Camera Connection (Camera Direct connector) Note: does not support KCX-C250MC camera switch box
Camera Distance Guides (adjustable)
Live Contrast Adjustment
Menu Language: 24 Languages
Auto Dimmer
Anti-theft security code
Engine Start-Stop unaffected
3-Year Warranty when installed by Authorised Alpine Dealer
Specifications
General
Power Requirement – 14.4V DC (11-16V allowable)
Operating Temperature – -20°C to +60°C
Power Output – 50W x 4
Maximum Current Consumption – 15A
Audio Output Level
Preout (Front, Rear): 4V/10k ohms (max.)
Preout (Subwoofer): 4V/10k ohms (max.)
Weight
2.3kg
Screen
Screen Size: 9 inch Laminated WXGA
LCD Type: Transparent Type TN LCD
Operation System: TFT Active Matrix
Number of Picture Elements: 2,764,800 pixels (1280 x 720 x 3)
Illumination System: White LED Backlighting
Effective Number of Picture Elements: 99.99%
Colour System: NTSC, PAL
FM Tuner
Tuning Range – 87.5 -105MHz
Mono Usable Sensitivity – 8.1 dBf (0.7μV/75 ohms)
50dB Quieting Sensitivity – 12dBf (1.1μV/75 ohms)
Alternate Channel Selectivity – 80dB
Signal-to-Noise Ratio – 65dB
Stereo Seperation – 35dB
AM Tuner
Tuning Range – 531-1701 kHz
Usable Sensitivity – 25.1μV/28 dBf
DAB Tuner
Tuning Range – 174 – 240 MHz
Usable Sensitivity – -100dBm
Signal-to-Noise Ratio – 90dB
USB (1)
USB Requirements: USB 2.0
Max. Power Consumption: 2,400 mA (CDP Support)
USB Class: Mass Storage Class, Play From Device
File System: FAT 16/32, exFAT
MP3 Decoding: MPEG-1/2 AUDIO Layer-3
WMA Decoding: Windows Media™ Audio
AAC Decoding: ACC-LC format ′′.m4a′′ file
FLAC Decoding
Number of Channels: 2-Channel (Stereo)
Frequency Response: 5 – 40k Hz ±1 dB *Frequency Response may differ depending on the encoder software/bit rate
Total Harmonic Distortion (at 1kHz): 0.005%
DynamicRange(at 1kHz): 95 dB
Signal-to-Noise Ratio: 95 dB
Channel Separation (at 1kHz): 90 dB
USB (2)
USB Class: Charge Only
Max. Power Consumption: 1,500 mA (CDP Support)
BLUETOOTH®
BLUETOOTH® Version: Bluetooth V4.2 (2,402 – 2,480 MHz)
Output Power: +4 dBm/2.51 mW Ave. (Power Class 2)
HFP: HFP (Hands Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
HSP (Head Set Profile)
A2DP: A2DP (Advanced Audio Distribution Profile)
AVRCP: AVRCP (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
HDMI Section
Input Format: 720p/480p/VGA
Output Format: 720p/480p
GPS
Reception Frequency 1575.42 +/- 1.023 MHz
Reception Sensitivity (Search) -136dB max.
Wi-Fi
Frequency Ranges
IEEE 802.11 b/g/n (2.4 GHz)
IEEE 802.11 a/n/ac (5 GHz)
Channels
1 -13 ch (2.4 GHz)
149 – 165 ch (5GHz)
Security Protocols
WPA3/WPA2-PSK (TKIP, AES)
Dimensions
Din Size: 1DIN chassis and 9” Capacitive Touch Screen
Chassis Size (W x H x D) mm: 178 x 50 x 149.6mm
Display Size (W x H x D) mm: 232.5 x 151.1 x 54.7
TJM
TJM PRO SERIES TWIN COMPRESSOR BUNDLE
$1,099.00
$1,227.00
Master every terrain with this unbeatable TJM Compressor Bundle - your complete, high-performance solution for fast tyre inflation, pressure management, and air tool operation.
What’s in the box?
TJM Twin Pro Series Compressor – 170LPM dual motor power
Pro Series 5L Tank – integrated air storage
Professional Airline Kit – 6m reinforced hose with fittings
Air Tank Line Kit – complete connection system
Key Benefits
170LPM fast inflation power
Twin motor reliability with fail-safe operation
Complete system - everything you need included
Professional-grade performance
3-year warranty for peace of mind
Installation Options:
Choose DIY installation with our comprehensive fitting instructions, or let our experienced team at TJM Northern Beaches handle the professional installation for you. With 15+ years of 4WD expertise, we ensure perfect fitment and optimal performance.
Ready to upgrade your 4WD air system? Contact TJM Northern Beaches today.
TJM PRO SERIES TWIN AIR COMPRESSOR
SKU: 013COMPVPROTAARetail Price: $789.00
Stay ahead of the pack with a TJM Pro Series Twin Air Compressor. It delivers a blazing 170LPM for lightning-fast inflation, thanks to its powerful internals and patented convection cooling system. The anodised aluminium body shields oversized internals and ensures long-lasting durability.
KEY BENEFITS:
170LPM fast inflation power
Tyre inflation: 10–40 PSI (285/75/R16)
4 × 1/8” BSPT | 5 × ¼” BSPT | 1 × 1/8” NPT ports
0.48L integrated air tank extrusion
Dual fuse and relays for independent motor operation
Vertical or horizontal mounting
48mm cylinder bore with oversized internals
Convection cooling system with internal fan
Fuse Rating: 2 × 40A (ANS type)
Supply Voltage: 12V
Weight: 14.60 kg
3-Year Warranty
TJM PRO SERIES AIR TANK AIRLINE KIT
SKU: 013COMPAT01ALKRetail Price: $64.00
The TJM Pro Series Airline Kit connects your compressor to the Pro Series Air Tank. Featuring a 3m heat-resistant hose and heavy-duty push-in fittings, it ensures a secure, leak-free setup for high-temp, high-performance environments.
KEY BENEFITS:
2 × Straight push-in fittings (male 1/4" BSPT - 12mm OD)
2 × 90° push-in elbow fittings (1/4" BSPT - 12mm OD)
3 × 90° elbow push-in fittings
10 × Cable ties (300mm)
1 × Nylon pneumatic tube (3m, 12mm OD)
Package Weight: 0.60 kg
TJM PRO SERIES AIR TANK 5L
SKU: 013COMPAT01AARetail Price: $289.00
AS2971-2007 certified, the TJM Pro Series 5L Air Tank delivers a steady high-volume air output, ideal for powering tools, inflating tyres, or activating diff lockers. Built tough for real-world use with your Pro Series compressor.
KEY BENEFITS:
Material: Aluminium
Size: 437mm × 148mm × 159mm
Suits: 013COMPVPROT / 013COMPVPROS
Colour: Gold
Package Weight: 5.20 kg
TJM PRO SERIES AIRLINE KIT
SKU 013COMPAKNAARetail price: $85
The TJM Airline Kit includes 6 metre rubber reinforced hose with one touch nitto fitting making connecting & disconnecting hose quick & easy with a single push. The kit includes accesories to inflate tyres, sports equipment, toys, operate pnuematic tools & a compact air blow gun contained in a durable PVC storage bag.
INCLUSIONS:
1 x 6m Rubber Reinforced Hose with Male & female Nitto One Touch Fitting with Hose Guard
1 x Air Blow Gun with Male Nitto Fitting
1 x Female Nitto One Touch Fitting with 1/4" BSPT Thread
1 x Tyre Inlfation Chuck with Nitto Fitting
1 x Large Inflation Needle
1 x Small Inflation Needle
1 x Rubber Tip Inflation Needle
1 x Short Air Blow Gun Tip
1 x PVC Storage Bag
nomadiQ
nomadiQ Grilling Grate
$39.95
This nomadiQ grate is a replacement of your original one. They will fit on any nomadiQ BBQ. Make sure you season it with vegetable oil before every use as it will increase the durability. DON”T use any metal utensils or cleaning brushes on them as they will damage the non-stick coating.
