FRONT RUNNER 10In Led Light Bar Fx250-Cb Gen 2 /...
$279.00
$310.00
Get ready for a lifetime of nighttime lighting adventures with this powerful 10” LED lightbar. It delivers a 6000k combo beam pattern to both 12V and 24V vehicles. This ECE-compliant bar has a light beam of up to 320 metres. It’s a great way to light up the road ahead or your camping area.
Combo beam pattern 6000K For 12V & 24V vehicles.
In combination: Coverage of near and far field illumination Brilliant white light color For multivariate use.
Power Level: 2.520lm Light beam up to 320m.
Maximum of optical efficiency, effectiveness and homogeneous light distribution.
Aluminum die-cast housing Shatterproof polycarbonate lens.
Robust and resistant - ensuring long life.
Certification ECE R10, ECE R149, ECE (Ref. 25) Overheat & polarity protection Highest protection classes according to IP6K8 & IP6K9K.
ECE-compliant and approved for use on roads Developed to meet the highest OE standards and requirements of the automotive industry
Efficient reflector lens design with 10 high-performance OSRAM LEDs.
Special reflector design for an appealing and modern look and reduced glare Increased safety through improved illumination off-road and on-road.
Effective and efficient supplement for vehicles from various application areas.
The OSRAM LEDriving driving lights of the FX Gen 2 series can be attached to cars, trucks, transporters, agricultural machinery, commercial vehicles, construction vehicles, off-road vehicles, caravans and quads.
OSRAM provides a 5-year guarantee.
OSRAM products are innovative and technologically high-quality products that are carefully tested and subject to the strict monitoring undertaken by the OSRAM quality assurance system.
Consists of:1 x Lightbar1 x Bracket setInstallation HardwareFitting Instructions
Product Dimensions:54mm (2.12") L x 83mm (3.27") W x 309mm (12.16") HWeight:1.48kg (3.26lbs)
Special Notes:Product type: On-roadLumens: 252032/37W12/24VColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 yearsSupplier SKU: LEDDL130-CB
FRONT RUNNER Hard Shell Tent Support Channels - TBMK009
$279.00
$310.00
Mount your hard shell tent with these Hard Shell Tent Supports so you can take advantage of the Quick Release Tent Mount Kit, giving you the freedom to remove your tent in seconds with no tools needed.
Works with the Quick Release Tent Mount Kit / 4 Piece.
Add extra lateral support for your tent to avoid unwanted flexing of the hard shell.
Use these when the edges of a hard shell tent mounted with the Quick Release Tent Mount Kit / 4 Piece are not supported by the side profiles of a Front Runner Roof Rack.
Fits popular brands such as Auto Home and James Baroud.
Easily secures to the underside of your tent using the mounting channels.
No drilling or modification of your tent is required.
PLEASE NOTE: Warranties on some tents may be voided if the tent does not have sufficient support.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:1 x Pair of Hard Shell Tent Support ChannelsInstallation HardwareFitting InstructionsMaterials used:3mm Black powder coated high strength steelProduct Dimensions:1094mm (43.1") L x 90mm (3.5") W x 23mm (0.9") H (Per Channel)Weight:6.2kg (13.7lbs) (Per Pair)
FRONT RUNNER 12In Led Light Bar Fx250-Cb / 12V/24V /...
$280.80
$312.00
The searchlight features a set of ten (10) high-performance LEDs that offer an impressive reach of 320 meters, emitting 2700 lumens. With a color temperature of 6000 Kelvin, the lighting output closely resembles daylight conditions, providing exceptional clarity.
The intelligent reflector design ensures even light distribution at a 5-degree angle and diverts the light from the LEDs, preventing direct exposure to oncoming traffic.
Constructed to withstand various applications, the searchlight is equipped with a durable polycarbonate lens, ensuring long-lasting performance.
The integrated driver and thermal management system not only regulate the temperature of the LEDs but also eliminate the risk of overheating. This contributes to the longevity of the searchlight's lifespan and ensures consistent operation.
Designed for both 12V and 24V systems, the LED lightbar is compliant with ECE regulations, making it suitable for a wide range of applications beyond automotive use. However, it's crucial to consider the specific regulations and legislation in each country before utilizing the light.
The searchlight can be securely attached to your Front Runner Roof Rack using RRAC166. For added customization, consider enhancing your lighting setup with the optional LIGH201 or LIGH202, which can be purchased separately.
Note: These powerful lights are designed for off-road use and should not be used on public roads. Special regulations and legislation in each country should be adhered to at all times.
FRONT RUNNER Pro Surfboard, Windsurf And Paddle Board Carrier -...
$280.80
$312.00
Made of stainless steel and sealed with the same durable, weather rated powder coating as the Front Runner Slimline Roof Racks.
The ultra dense yet soft weather resistant rubber pads cradle your valuable gear without harming or scratching the surfaces.
The Stratchit straps clever cinching system mean easy-on and easy-off secure transport every time.
Adjustable to hold all shapes and lengths of boards across the width and length of Front Runner Slimline Roof Racks or Front Runner Load Bars.
Each Front Runner Board Carrier can hold 1 to 2 boards.
Most Front Runner Roof Racks and Load Bar widths will accommodate a 2nd Front Runner Board Carrier to hold up to 4 boards.
Includes:
2 pairs of board holders
1 pair of Front Runner Stratchits
All hardware necessary to mount to a Slimline Roof Rack, Load Bars, or other flat surface.
Installation Manual
Made in South Africa
Features
Consists of:
2x Brackets
2x Stratchit Strap
Bolt Kit
Materials used:
Black powder-coated Steel
Polyethylene pads
Product dimensions:
L 276mm (10.9") x W 76mm (3") x H 67mm (2.6")
Weight:
Individual bracket: 0.6kg (1.3lbs)
Entire kit: 2.9kg (6.4lbs)
FRONT RUNNER Slimpro Van Rack Expedition Rails / 2569Mm (L)...
$283.50
$315.00
Add expedition style side rails to your Front Runner Slimpro Van Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger gear (eg. Canoe/Kayak, Surf Board, Lumber, Ladders) or anything needed for your daily activity. Please Note: This kit works with Slimpro Van Racks with a tray length of 2569mm / 101.1".
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimpro Van Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4 to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed.
Features
Consists of:
8x Tubular rails
2x Cast LH drop downs
2x Cast RH drop downs
6x Mid-joints
Installation hardware
Materials used:
Black powder-coated stainless steel
Black powder-coated die cast aluminium
Product Dimensions:
2417mm (95.2") L x 20mm (0.8") W x 62mm (2.4") H
This is one side only (LH & RH same dimensions)
Weight:
4.58kg (10.1lbs)
FRONT RUNNER Narrow Slat / 1255Mm (Pair) - RRNS1255
$283.50
$315.00
These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points.
All hardware and brackets are included to fit to your existing Slimpro Van Rack
These slats will work with any Front Runner Slimpro Van Rack that uses 1255mm slats.
Features T-slots on both the top and bottom faces.
The T-slots allow for quick fitting and removal of accessories and equipment.
Made from the same black powder-coated aluminum as all Front Runner Racks.
Features
Consists of:
1 x Pair of Narrow Slats / 1255mm
Installation Hardware
Materials used:
Black powder coated aluminium
Product Dimensions:
1249mm (49.1") L x 60mm (2.4") W x 23mm (0.9") H
Weight:
3.74kg (8.25lbs)
FRONT RUNNER Land Rover New Defender (2020-Current) Side Mount Ladder...
$284.40
$316.00
The three-step ladder offers a convenient solution for accessing and loading gear onto the roof rack of your Land Rover New Defender. It attaches securely to the side of your Slimline II Roof Rack and utilizes existing points on your vehicle.
Easily access the contents of your Rack with this 3-rung ladder.
Securely bolts underneath the side profile of the Slimline II Roof Rack and OEM mounting points on the New Defender's body. No drilling is required.
Rubber grips on the ladder rungs prevent slipping in wet weather.
Made of high-strength steel and aluminium and coated in the same weather-resistant black powder coating as the Front Runner racks.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Land Rover New Defender Side Ladder
Installation Hardware
Fitment Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
369mm (14.5") L x 322mm (12.7") W x 684mm (26.9") H
Weight:
4.5kg (9.9lbs)
Load Rating:
110kg (242.5lbs)
LIGHTFORCE Remote Mount Striker Hid 50W 4200K - CBRMS5042
$296.10
$329.00
• Bulbs have been designed by Lightforce exclusively for use with our parabolic reflectors. These unique bulbs reduce the shadow "V" line common in aftermarket kits • XENON HID bulbs used in these kits have been specially manufactured to match the relevant ballast outputs • Colour rendering available 4200K, 5000K • Ballast is pre-mounted to a stainless steel bracket located directly to the back of the light • Ballasts fully comply with Australian standard AS/NZS CISPR 15: 2006 for electromagnetic radiation interference • Fully sealed and water-resistant compact slim-line ballast • Waterproof connectors provided • Available in 50w and 70w
70w ballast is now upgraded to a Fast start (12v only) reaching 100% intensity in 3 seconds (previous model 100% intensity was reached at 8 seconds).
Specifications
Recommended operating temperatures (ambient)
-40°C > +40°C Maximum
-40°F > +104°F Maximum
Lumen output:
50 watt 5000 lumen
70 watt 6400 lumen
For 50w and 70w models
Input voltage range 12 - 16 volts
Operating voltage 13.2 volts DC (typical)
MSA Tourer Pack (Small) - TP1.2
$296.10
$329.00
MSA 4X4’s Tourer Packs are the perfect way to increase storage possibilities during travel while freeing up space inside your vehicle.
TP1.2 Small Dimensions (cm) 120L x 120W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
MSA Basket Pack (Medium) - BP1.5
$296.10
$329.00
Dimensions (cm) 150L x 90W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
MSA Toyota Hilux Sr5 Single/Extra Dual Cab Rear Dc Full...
$297.90
$331.00
Rear Dual Cab Full Width Bench (3 Head Rests) (MTO)
Year: 08/09-10/13
Model: SR5 Single, Extra & Dual Cab
Position: Rear
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
STORE PICK-UP ONLY- FRONT RUNNER Alu-Cab Roof Top Tent Mount...
$307.80
$342.00
Now, you can easily mount an Alu-Cab tent to your reliable Front Runner Roof Rack, thanks to this black powder-coated steel Tent Mount Kit, which consists of four brackets and two support channel, plus all the necessary nuts and bolts.
Mount your Alu-Cab tent with this specifically made Tent Mount Kit to the Front Runner Roof Rack.
This kit consists of four (4) x Tent Mount Bracket/Standard which match the roof rack's low profile (30mm H) and two (2) 1255mm slats to support your tent.
They are made from black powder-coated steel, have pre-cut mounting holes and all mounting pieces (eg. bolts and nuts) are included.
Additional Alu-Cab tent mount kit, Alu-Cab Roof Top Tent Mount Kit / 1425mm is available.
Consists of:2 x Tent Mount Bracket/Standard1 x Roof Load Bar Pair 1255mm(W)Fitting instructionsInstallation hardware
Materials used:Black powder-coated steel
Product Dimensions:244mm (9.6") L x 60mm (2.4") W x 25mm (1") H (Single Bracket)
Weight:4.34kg (9.6lbs)
FRONT RUNNER 4X4 DS50 Drop Slide™ Fridge Slide 50L–80L -...
$314.10
$349.00
MSA 4X4 DS50 Drop Slide™ Fridge Slide
Product Code: DS50
The MSA 4X4 DS50 Drop Slide™ is the ultimate fridge access solution for 4WD touring, camping, caravans, camper trailers, and canopy setups. Designed to provide safe and convenient access to portable fridges, toolboxes, and generators, the patented Drop Slide™ lowers your fridge by 300mm while extending it further beyond the vehicle for effortless access.
Using MSA's innovative lowering mechanism, the platform remains perfectly level throughout operation while avoiding contact with your vehicle. This makes accessing food, drinks, and camping supplies significantly easier, particularly in lifted vehicles and high canopy installations.
Built to withstand Australia's toughest touring conditions, the DS50 features a heavy-duty powder-coated steel frame, stainless steel hardware, and MSA's signature blue anodised aluminium faceplate. The compact design maximises available storage space while the lock-in and lock-out safety system secures the slide during operation and transport.
Features
Patented Drop Slide™ design
300mm controlled lowering action
Compact space-saving design
Easy installation with pre-drilled mounting holes
Lock-in and lock-out safety system
Heavy-duty powder-coated steel frame
Stainless steel and blue anodised aluminium fittings
Travel lock and key included
Suitable for fridges, generators, and storage systems
Compatible with MSA 4X4 Fridge Barriers
All fixing hardware and tie-down straps included
Backed by MSA 4X4's Lifetime Guarantee
Specifications
Product Code: DS50
Weight: 35kg
Fridge Tray Size: 810mm x 480mm
Slide Length (Closed): 880mm
Slide Length (Open): 1860mm
Overall Width: 590mm
Handle Width: 535mm
Drop Distance: 300mm
Gas Strut Rating: 800N
Freight Dimensions: 860mm x 690mm x 170mm
Freight Weight: 38kg
Frequently Asked Questions
What size fridge will fit the MSA DS50 Drop Slide™?
The DS50 is designed to suit many popular portable fridge models typically ranging from 50L to 80L. We recommend checking your fridge dimensions against the tray size before purchasing.
How far does the DS50 Drop Slide™ lower?
The DS50 lowers approximately 300mm while extending out from the vehicle, making it easier to access fridges installed in canopies, wagons, and touring setups.
Can the DS50 be installed in a canopy or caravan?
Yes. The DS50 is suitable for 4WD wagons, ute canopies, caravans, camper trailers, and touring vehicles where easier fridge access is required.
FRONT RUNNER Potjie Pot/Dutch Oven And Carrier - RRAC081
$316.80
$352.00
Theres no better place to keep potentially hot, grimy, dirty, and cumbersome camp kitchen supplies than up and out of the way, outside the vehicle.
The Front Runner Potjie Pot Carrier offers a sensible way to travel with a potjie pot.
The potjie pot is secured in the bracket by the three legs. The supplied ratchet strap threads through the lid of the pot and fixes points on the bracket.
The #3 cast iron pot holds 7.8L / 2.1 Gallons. The round shape and cast iron allows the heat to flow evenly around the sides and maintain liquids at the lowest point to keep them from burning. The lid has a deep lip for holding hot coals.
The high strength steel carrier is finished with the same durable, weather resistant powder coating as the Front Runner Slimline II Rack.
Like all Front Runner rack accessories, the installation is simple. Just slide the bolts into the t-slots of any Front Runner Rack Tray, set down the carrier, then add nuts and tighten.
Features
Consists of:
Rack mounted bracket
Strap guide
Ratchet strap
mounting hardware
No 3 cast iron pot
Materials used:
Black powder-coated high strength steel
Nylon strap
Cast iron pot
Product Dimensions:
280mm (11") W x 280mm (11") D x 343mm (13.5") H
Pot Specifications:
No. 3 potjie Pot - 7.8l (2.1gal) capacity
Max outer diameter: 290mm (11.4")
Height: 300mm (11.8")
Lid max outer diameter: 260mm (10.2")
Total Weight:
11.25kg (24.9lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2772Mm...
$318.60
$354.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 14 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 14 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:10x Tubular rails2x Cast LH drop downs2x Cast RH drop downs8x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2652mm (104.4") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:4.6kg (10.1lbs)
MSA Toyota Hilux Sr5 Single/Extra D/C Rear Extra Cab Small...
$319.50
$355.00
Rear Extra Cab Small 50/50 bench single back (No Headrest).
Year: 08/97-04/05
Model: SR5 Single, Extra & Dual Cab
Position: Rear
Weight: 3 kg
Freight Dimensions: 36 × 26 × 19 cm
POLYAIR Red Series Kit Toyota Prado 0 - 2" Lift...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Prado 95 series 1996 - 2002
POLYAIR Red Series Kit To Suit Nissan Pathfinder R51 2005...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
POLYAIR Red Series Kit () Toyota - Lexus, Landcruiser 1"...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Toyota - Lexus LX, 1995-on, NON-AIR SUSPENSION
Toyota - Landcruiser 80 Series, Toyota - Landcruiser 100 series IFS, Toyota - Landcruiser 200 Series
POLYAIR 2" Lift Red Series Airbag Kit, Jeep Wrangler -...
$355.00
The Polyair Red Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- suspension bottoming out
- rough ride
- excessive sway & body roll
- unpredictable braking characteristics
- poor headlight aim
All this can be mitigated by simply installing a set of Polyair Red Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the coil springs are rated well past what you will carry on a daily basis, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Red Series means you can have a smooth OEM ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-35psi
- Tough moulded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Jeep - Wrangler JK, 2007 - 2017
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
