DIRECTION-PLUS Ryco Pre-Filter Kit Navara Np300 () - RC630DPK
$391.50
$435.00
Direction Plus™ Ryco Pre-Filter Kit RC630DPK is designed, engineered & assembled in Australia to suit Nissan Navara NP300 models, protecting its engine against costly injector failure. Diesel contains more impurities than petrol, necessitating optimal filtration. This is crucial, especially while towing, taking your vehicle off-road, or accessing fuel of uncertain quality in remote areas. While the OE filter works well for many contaminants, it has limitations against water and other particles.
This kit fits:
Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015 – On
PROTECT YOUR ENGINE
It’s easy to think that fuel contamination is something that happens “in the bush” but this is simply not true!
Did you know that 72% of all diesel fuel injection system failures are caused by water and fuel lubricity problems?
Direction Plus™ Ryco Pre-Filter kits are designed for modern high pressure fuel systems with a lift pump in the tank, offering 10-micron filter media, effectively removes 99% water and 98% particles from diesel fuel, providing maximum efficiency, life and flow to your vehicle’s fuel system. This protects the main fuel filter and engine from contamination-related damage. By fitting the Wireless Sensor Kit, it is a true fit-and-forget install, where you can monitor your pre-filter kit remotely, no longer having to look under the bonnet where space is restricted to check the bowl for water.
HOW IT WORKS
Installing a Direction Plus™ Ryco Pre-filter kit between the fuel tank and the O.E.M fuel filter, effectively removes 99% water and 98% particles from diesel fuel providing maximum efficiency, life and flow to your vehicle’s fuel system. This also leaves the O.E.M fuel filter to do the final and finer filtration. This ensures you are maximising the protection of your diesel fuel system.
For the ultimate front line defence against water and particle contamination, investing in a Direction Plus™ Ryco Pre-Filter Kit will protect your investment 24 hours a day, 365 days a year.
BENEFITS OF A RYCO PRE-FILTER KIT:
Isolate water before it journeys through your fuel system causing damage.
Protect your fuel system from corrosion of metal components that left unaddressed
can cause expensive damage to your fuel system.
Reduce micro-bacterial growth caused by water contamination, which can reduce
engine durability and performance.
Remove other contaminants down to 10 microns, meaning your OE filter does not
have to work as hard.
Water resistant silicone coated filter media provides maximum efficiency, life and flow
Maximum working Pressure 87 PSI/6 bar/600 kPa
Give you a visible or audible alert to water in your fuel system allowing you to take
action to protect your engine (when used with S102XK and S101X accessories).
Allow you to easily drain water from your fuel system multiple times to get to safety
or a mechanical workshop.
Tested in the Ryco lab to meet or exceed OE equivalents and to international ISO and SAE standards
Check fitment guide below to confirm suitability for your vehicle.
TORQIT Pedal Torq To Suit Jeep Grand Cherokee - PT1043
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
TORQIT Pedal Torq To Suit Mitsubishi Triton - PT1062
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
TORQIT Pedal Torq To Suit Toyota Fj Cruiser, Hilux &...
$359.10
$399.00
The Throttle Control is a compact unit that is fixed to a driver’s dash, allowing easy access to adjust settings. The Pedal Torq increases throttle response by adjusting the signal sent to the vehicle's ECU. In simple terms, the Pedal Torq eliminates throttle lag on a vehicles accelerator giving you more power, quicker.
Installation
The Pedal Torq can be fitted to both diesel and petrol vehicles with installation complete in only a few minutes. The unit utilises all factory plugs so there is no cutting or rewiring is necessary. The Pedal Torq simply connects to the existing accelerator plug.
Key Features
* 5-year warranty
* Vehicle-specific software
* Dash mount control
* 18 settings for driver specific tuning
* Utilises all factory plugs, no cutting or rewiring required
LIGHTFORCE Viper 40" Single Row Light Bar - LFLB40S
$401.40
$446.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts
DIRECTION-PLUS Fuel Manager Post-Filter Kit Hilux / Fortuner () -...
$409.50
$455.00
Direction Plus™ Fuel Manager Post-Filter Kit PF628DPK is designed and engineered in Australia to suit Toyota Fortuner and Hilux models, protecting its engine against costly injector failure.
This kit fits:
Toyota Hilux 2GD-FTV (2.4L 4cyl) 2018 – On
Toyota Hilux 1GD-FTV (2.8L 4cyl) 2016 – On
Dual Battery compatible
Toyota Fortuner 1GD-FTV (2.8L 4cyl) 2016 – On
NOTE: EXCLUDES Mild Hybrid 48V-equipped V-Active versions
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
POLYAIR 2" Lift Ultimate Airbag Kit, Mitsubishi Pajero - 99897ULT
$480.00
The Polyair Ultimate Series load assist airbag kits are specifically designed to suit coil sprung vehicles.
The Ultimate Series unique design allows for a huge 60psi of pressure for those seriously heavy loads!
When you load up the back of the vehicle or hook up a caravan or trailer, you’ll notice the rear end drop down; this drop can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
All this can be mitigated by simply installing a set of Polyair Ultimate Series!
The airbag kit is air adjustable, giving you flexibility to tailor the level of support for your individual load types and weights.
In this day and age, we are all expecting more out of our SUV’s and 4WD’s and as a result they are towing and carrying more and more. We at Polyair Springs have acknowledged this trend and have provided a solution with the ‘Polyair Ultimate Series’
The Ultimate Series significant 60psi pressure rating allows you to take on the tough loads, whether you are highway touring or travelling off the beaten track. The Polyair Ultimates are the most advanced polyurethane airbag on the market and will provide your vehicle with a new level of support!
Features:
- Air adjustable from 5-60psi !
- Tough molded polyurethane construction
- Easy to install using common tools
- Easy to follow, illustrated instructions
- Quick connecting, easy to use air fittings.
2 year, unlimited km warranty
Position: Rear
Mitsubishi - Pajero 2000 - on , NM, NX,
POLYAIR Standard Ultimate Airbag Kit, Nissan Patrol - 92094ULT
$480.00
The Polyair Bellows Ultimate load assist kits are specifically designed to suit big American SUV’s and 4WD’s. With an internal bump stop to help absorb shock, even with zero air pressure, it provides a 3 stage ride comfort.
When you load up the back of the vehicle or hook up a caravan / trailer, you’ll notice the rear end drop down, this drop in height can have some adverse effects on your vehicle’s safety and handling.
Symptoms such as:
- Suspension bottoming out
- Rough ride
- Excessive sway & body roll
- Unpredictable braking characteristics
- Poor headlight aim
- Clearance issues
All this can be mitigated by installing a set of Polyair Bellows Ultimate.
The Bellows kit is air adjustable giving you flexibility to tailor the level of support for your individual load types and weights.
Having a correctly sprung vehicle for constant loads is always recommended as the first step, but in most cases the leaf springs are rated well past what you will carry daily, giving you a rough, uncomfortable ride when not loaded up.
Having the flexibility of the adjustable Polyair Bellows means you can have a smooth stock ride comfort when unloaded and simply adjust the pressure when towing or hauling. Simple.
Features:
- Air adjustable from 5-100psi
- Internal bump stop
- Built with a superior 2-ply fabric reinforced rubber
- Ultra high strength & corrosion proof Zytel ® Nylon end caps
- Easy to install with illustrated instructions
- Quick connecting, easy to use air fittings.
- Kits designed for standard height and raised applications
- Bespoke design for each vehicle
2 year, unlimited km warranty.
To Suit:
Nissan Patrol
POLYAIR Standard Ultimate Airbag Kit, Ford Everest - 95099ULT
$480.00
POLYAIR ULTIMATE AIRBAG SUSPENSION KIT (2" RAISED) FITS FORD EVEREST NEXT GEN 2022-ON (95099ULT)PART NO95099ULTBRANDPOLYAIRDESCRIPTIONTHE POLYAIR ULTIMATE SERIES LOAD ASSIST AIRBAG KITS ARE SPECIFICALLY DESIGNED TO SUIT COIL SPRUNG VEHICLES.The ULTIMATE SERIES UNIQUE DESIGN ALLOWS FOR A HUGE 60PSI OF PRESSURE FOR THOSE SERIOUSLY HEAVY LOADS!
WHEN YOU LOAD UP THE BACK OF THE VEHICLE OR HOOK UP A CARAVAN OR TRAILER, YOU’LL NOTICE THE REAR END DROP DOWN; THIS DROP CAN HAVE SOME ADVERSE EFFECTS ON YOUR VEHICE'S SAFETY AND HANDLING.SYMPTOMS SUCH AS:
- SUSPENSION BOTTOMING OUT- ROUGH RIDE- EXCESSIVE SWAY & BODY ROLL- UNPREDICTABLE BRAKING CHARACTERISTICS- POOR HEADIGHT AIMALL THIS CAN BE MITIGATED BY SIMPLY INSTALLING A SET OF POLYAIR ULTIMATE SERIES!THE AIRBAG KIT IS AIR ADJUSTABLE, GIVING YOU FLEXIBILITY TO TAILOR THE LEVEL OF SUPPORT FOR YOUR INDIVIDUAL LOAD TYPES AND WEIGHTS.IN THIS DAYAND AGE, WE ARE ALL EXPECTING MORE OUT OF OUR SUV’S AND 4WD’S AND AS A RESULT THEY ARE TOWING AND CARRYING MORE AND MORE. POLYAIR SPRING HAVE ACKNOWLEDGED THIS TREND AND HAVE PROVIDED A SOLUTION WITH THE ‘POLYAIR ULTIMATE SERIES’THE ULTIMATE SERIES SIGNIFICANT 60PSI PRESSURE RATING ALOWS YOU TO TAKE ON THE TOUGH LOADS, WHETHER YOU ARE HIGHWAY TOURING OR TRAVELLING OFF THE BEATEN TRACK. THE POLYAIR ULTIMATES ARE THE MOST ADVANCED POLYURETHANE AIRBAG ON THE MARKET AND WILL PROVIDE YOUR VEHICLE WITH A NEW LEVEL OF SUPPORT!
FEATURES:- AIR ADJUSTABE 5-60PSI !- TOUGH MOLDED POLYURETHANE CONSTRUCTION- EASY TO INSTALL COMMON TOOLS- EASY TO FOLLOW, ILLUSTRATED INSTRUCTIONS- QUICK CONNECTING, EASY TO USE AIR FITTINGS.
DIRECTION-PLUS Fuel Manager Post-Filter Kit D-Max / Mu-X / Bt-50...
$444.60
$494.00
Direction Plus™ Fuel Manager Post-Filter Kit PF645DPK is designed and engineered in Australia to suit Isuzu D-Max, MU-X and Mazda BT-50 models, protecting its engine against costly injector failure.
This kit fits:
Isuzu D-Max 4JJ3TCX (3.0L 4cyl) 2020 – On
Isuzu MU-X 4JJ3TCX (3.0L 4cyl) 2021 – On
Mazda BT-50 4JJ3TCX (3.0L 4cyl) 2021 – On
PROTECT YOUR ENGINE
To ensure that you get the best protection, we recommend to install Direction Plus Fuel Manager Post-Filter Kit to protect late model common rail diesel engine against particle contamination and injector failure.
All common-rail systems have one factory filter. Installing Direction Plus Fuel Manager Post-Filter kit between the engine and the O.E.M fuel filter, will remove any contamination not captured by the O.E.M fuel filter ensuring you are maximising the protection of your diesel fuel system against particle contamination.
BENEFITS OF INSTALLING A POST-FILTER KIT ON YOUR 4WD:
Reduce wear & tear and avoid repair costs that can exceed $10,000
Superior particle removal down to 2 micron*
Clear water drainage bowl to easily identify removed water
Keeps critical engine components clean
No filter bypass – contaminated fuel will not be sent to the fuel system even when the filter is blocked
Check fitment guide below to confirm suitability for your vehicle.
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Toyota Prado 150...
$492.30
$547.00
The TransChill Arctic Black Transmission cooler kit TCB620DPK fits:
Toyota Prado 150 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 150 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
Toyota Prado 155 Series 1KD-FTV (3.0L 4cyl)
Toyota Prado 155 Series 1GD-FTV (2.8L 4cyl) 2009 – On models
This product is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The TransChill Arctic Black Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler can reduce the temperature of the ATF by as much as 33°C which can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
MSA SL60 Straight Fridge Slide 200kg Load Rating - SL60
$495.00
$550.00
MSA 4X4 SL60 Straight Fridge Slide
Part Number: SL60
The MSA 4X4 SL60 Straight Fridge Slide is designed to provide fast, safe, and convenient access to your portable fridge while maximising storage efficiency in your 4WD, ute, canopy, caravan, or camper trailer. Ideal for touring vehicles with lower rear storage setups, the SL60 allows your fridge to slide smoothly out beyond the tailgate or rear bar while remaining level for easy access.
Engineered for Australian touring conditions, the SL60 features heavy-duty over-extension roller bearings that deliver exceptional slide travel while maintaining an impressive 200kg load rating. Whether you're accessing food, drinks, or camping supplies, the slide eliminates the need to climb into your vehicle or struggle with lifting a fully loaded fridge.
For added safety and security, the SL60 incorporates MSA's unique lock-in and lock-out mechanism, preventing unwanted movement during operation and transit. A built-in key lock, sealed dust-resistant design, and included tie-down straps ensure your fridge remains secure on every adventure.
Features
Heavy-duty 200kg slide runner rating
Over-extension roller bearing system for maximum slide travel
Unique lock-in and lock-out safety mechanism
Pre-assembled for quick and easy installation
Blue anodised aluminium fittings for a premium finish
Includes all fixings and fridge tie-down straps
Sealed dust-resistant design
Available in multiple sizes to suit different fridge setups
Compatible fridge barriers available
Ideal for 4WDs, caravans, camper trailers, canopies, and touring vehicles
Frequently Asked Questions
What size fridge is the MSA SL60 suitable for?
The SL60 is designed to suit a wide range of portable fridges. We recommend checking your fridge dimensions and weight to ensure compatibility with the slide and your vehicle setup.
Can the MSA SL60 be installed in a canopy or caravan?
Yes. The SL60 is suitable for installation in 4WD wagons, ute canopies, caravans, camper trailers, and other touring setups where a straight slide configuration is preferred.
What is the weight capacity of the SL60 Fridge Slide?
The MSA SL60 features a heavy-duty 200kg slide runner rating, providing reliable performance for loaded fridges and touring equipment.
DIRECTION-PLUS Transchill Transmission Cooler Kit Toyota Hilux N80 () -...
$496.80
$552.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB628DPK fits Toyota Hilux & Fortuner 1GD-FTV (2.8L 4cyl) models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
FRONT RUNNER Suzuki Jimny 5 Door Base Deck - SSDS134
$498.60
$554.00
Install the three-piece carpeted seat delete Base Deck and get your Toyota Sequoia primed for all types of gear-carrying duties. You now have a level packing surface, perfect for mounting a Fridge Slide or a stack of secured Wolf Pack Pro storage boxes.
Includes 3 base decks (1 front, 1 middle and 1 rear deck), 6 mounting brackets, installation hardware and fitting instructions.
The decks ensure a clean finished look and provide a level packing, or mounting surface, in the rear of the Toyota Sequoia.
The decks are covered with a durable, UV resistant nylon pile carpet.
The carpeted surface creates resiliency for securing cargo while insulating against noise and vibration.
The decks create a solid mounting surface for fridge sliders and the 4 Cub Box Drawer / Narrow.
Customize your storage configuration. Add Cargo Rail / 140mm or Cargo Rail / 1150mm, together with Tie Down Rings / Eye Nuts For Drawer System to Secure luggage, Wolf Pack Pro, Cub Pack, aluminum boxes and other storage containers to the top deck using Stratchits or other straps.
The 3rd row of seats need to be removed for installation of the base deck.
Features
Consists of:
1 x Rear Deck
1 x Middle Deck
1 x Front Deck
3 x Deck Support
3 x Front Mounting Feet
3 x Rear Mounting Feet
Installation Hardware
Fitting Instructions
Materials used:
Black powder-coated high strength steel
Product Dimensions:
1200mm (47.2") L x 1340mm (52.8") W x 170mm (6.7") H
Weight:
20.23Kg (44.6lbs)
FRONT RUNNER Land Rover Defender Tdi/Td5 (1983-2006) Gullwing Box -...
$512.10
$569.00
The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium and creates a convinient storage compartment accessible through the side of your vehicle.
The Front Runner Gullwing Box is used in conjunction with the Front Runner Gullwing Window-Glass or Front Runner Gullwing Window-Aluminium. This creates extra convenient storage space for your Land Rover Defender TDI/TD5. Front Runner Gullwing Box Shelves can be used to create divisions in the box for storage.
*Front Runner Gullwing Box Shelves, sold seperately.
Consists of:1x Fastening Kit2x Pinch Welds2x Side Panels - 1 Left, 1 Right2x Mounting Brackets1x Top Panel2x Wooden Back Panels1x Bottom PanelMaterials used:Black powder-coated mild steelProduct Dimensions:L 255mm (10") x W 1000mm (39.4") x H 654mm (25.8")Weight:13.1kg (28.9lbs)
FRONT RUNNER Load Bed Cargo Slide Drop Down Table Kit...
$517.50
$575.00
An essential accessory to add to your Front Runner Expander Camping Chair*.
Creates a foldable table on either side of the Expander Chair.
Secures to the frame of the Expander Chair's seat and hooks on the armrest to place your belongings.
Ideal for camping, sports events, the beach, and any other activities.
Once secured the table top folds up with the chair and can be stored together in the Expander Chair Storage Bag .
Features an integrated cut-out to place a glass/wine glass conveniently next to your chair at an easy-to-reach height.
Made from aluminum and high-strength steel and sealed in the same weather-resistant finish as all Front Runner racks.
* The Front Runner Expander Camping Chair is not included and must be purchased separately.
Features
Consists of:
1 x Side Table Top
1 x Table Hinge
1 x Strap
1 x Table Hook
Installation Hardware
Fitting Instructions
Materials used:
Black Powder coated aluminium
Black Powder coated high strength steel
Product Dimensions:
190mm (7.5") L x 267mm (11.7") W
Weight:
0.48kg (1.1 lbs)
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit Nissan Navara Np300...
$551.70
$613.00
The NEW & IMPROVED 32mm 14 row Arctic Black TransChill Transmission Oil Cooler Kit (TCB630DPK) suits the Nissan Navara NP300 YS23DTTi (2.3L 4cyl) 2015- On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
Pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
75% more performance than a comparable tube and fin design (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Australian Made vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
Locally designed and packed with all the mounting hardware required for a DIY installation
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
MSA Toyota Hilux 8Th Gen Sr5 / Sr Extra Cab...
$578.70
$643.01
Complete Front & Second Row Set.
Year: 08/19-Current
Model: 8th Gen SR5 / SR Extra Cab
Weight: 6 kg
Freight Dimensions: 36 × 26 × 38 cm
Position: Complete
DIRECTION-PLUS Transchill Arctic Black Transmission Cooler Kit For D-Max &...
$598.50
$665.00
The NEW 32mm 14 row TransChill Transmission cooler kit TCB645DPK fits Isuzu D-Max and Mazda BT-50 4JJ3-TCX (3.0L 4cyl) 2020 – On models and is designed specifically to reduce excessive transmission heat caused by towing, carrying loads and driving in sand, snow, off-road or hot conditions.
The 32mm TransChill Transmission cooler is an effective & economical way to keep the transmission at its optimum operating temperature. High efficiency turbulators in each tube direct the fluid for superior heat transfer. The unique 32mm plate & fin design allows for extreme cooling whilst the compact design is perfect for our vehicle specific mounting.
New & Improved model
Designed and engineered in Australia
32mm, 14 row fin & plate design allows for extreme cooling
Durable Black powder coat resists oxidisation
100% pressure tested at 150psi for quality assurance
Internal tubulation for efficient heat transfer
Up to 50% more efficient (*heat transfer rate – BTU/hr)
Pre-drilled mounting plates for easy installation
Inlet & Outlet size: M16 fittings
WHY DO YOU NEED ONE?
Due to the extreme heat generated in an automatic transmission, an auxiliary oil cooler is an economical and efficient way to help protect against costly transmission repairs.
Automatic Transmission Fluid (ATF) cools, lubricates and cleans internal transmission components. When transmission components exceed 93°C (200°F) the performance of ATF is seriously compromised.
Subsequently the life span of the ATF, seals and internal components of the transmission are significantly reduced. Higher internal temperatures also increase the wear rate of the friction and clutch plates.
HOW IT WORKS
The Direction-Plus™ Transmission Cooler Kit can reduce the temperature of the ATF by as much as 33°C and assist maintaining acceptable operating temperatures. A reduction of just 11°C that can double the life expectancy of the transmission, ATF and all internal components.
AUTOMATIC TRANSCHILL CONTENTS:
Vehicle specific laser cut 4mm 5005-H34 aluminum mounting brackets
All mounting hardware included
ATF Hose (Meets or exceeds SAE J1019 requirements)
1x Davies Craig Black 32mm 14 row oil cooler
3yr Warranty *Conditions apply
FRONT RUNNER 10In Led Light Round Mx260-Cb / 12V/24V /...
$603.00
$670.00
A high-performance LED driving light reaches a distance of 350m with a color temperature of 6000 Kelvin producing daylight lighting conditions and delivers a luminosity of 3500 lumens. Polycarbonate lens, durable to withstand off-road conditions.
Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan. Equipped with an integrated driver and thermal management system, eliminating the risk of overheating. 12V/24V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural. Special regulations and legislation within each country should be taken into consideration before use.
The MX260-CB must be installed in pairs for 12/24V vehicles. Secures to your Roof Rack with the supplied bracket. Optional LIGH201 or LIGH202 are available and sold separately.
Consists of: 1 x Round LED Light
Product Dimensions:
Light:261mm (10.3'') L x 150mm (5.9'') W x 229mm (9'') H
Light with supplied bracket:261mm (10.3'') L x 150mm (5.9'') W x 251mm (9.9'') H
Weight:4.4Kg (9.7lbs)
SKU: LEDDL112-CB
Lumens: 350012/24V60/2.5W5/0.21 Amps
Color temperature: 6000 K
Lifespan Tc: 5000 h
Guarantee: 5 years
ECE Reference: 50
Special NotesSKU LEDDL112-CB