DIRECTION-PLUS Universal Provent Ultimate Catch Can - PV150DPK
$188.96
$209.95
Direction-Plus™ Universal ProVent® Ultimate Catch Can PV150DPK kit comes with Provent Element 150 + fittings. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.
Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
NOTE: This kit does not include brackets. If you need the same kit with brackets go to PV151DPK
Advantages of The Direction-Plus™ ProVent® Oil Separator PV150DPK Kit:
• Ultra-compact design• Up to 150 l/min blow-by gas• Equipped as standard with high-efficiency medium• Pressure regulation• Available with by-pass or pressure-relief valve• Suitable for use as an open or closed CCV• Use of two ProVent 150 in parallel possible• Protection against incorrect insertion of replacement element through symmetrical design• Check valve for oil return available as option (recommended)• Cover position adjustable in steps of 3 degrees
FRONT RUNNER Universal Track / 1400Mm(L) - TRAC002
$197.10
$219.00
The Front Runner Tracks have been designed to accommodate a stud plate which slides into the t-slotted track and enables the foot assembly to be secured with nyloc nuts before the roof rack bolts on to the foot.
Made from t-slotted aluminum extrusion.
Often used for trailers and canopies to mount a rack or load bars.
Each track is supplied with fitted double sided tape and a section of pre-cut rubber, which is used to protect the vehicle roof from the track.
Powder coated black.
Comes in pairs.
Features
TRAC002 - Universal Track / 1400mm(L) - by Front Runner
Consisting of:
1 x TRAC002 - Universal Track / 1400mm(L) - by Front Runner
Material used:
Black epoxy powder-coated T6 aluminium
Approximate Installed Weight 3kg (6lbs)
Shipping Dimensions:
Width 112mm (4")
Length 1410mm (56")
Height 112mm (4")
Shipping Weight:
Weight 3.3kg (7.3lbs)
FRONT RUNNER Vertical Jerry Can Holder - JCHO019
$205.20
$228.00
Front Runner Vertical Jerry Can Holder - JCHO019
Secure your fuel supply with confidence using the Front Runner Vertical Jerry Can Holder. Designed to safely hold a 20L NATO/Wedco-style military jerry can, this heavy-duty holder features a durable stainless steel latch system with an integrated safety catch to keep your fuel container firmly in place, even during demanding off-road adventures.
Constructed from black powder-coated stainless steel for maximum durability and corrosion resistance, this holder is built to withstand harsh environments and years of rugged use. The locking strap design covers the jerry can cap, allowing you to add a padlock for added security and peace of mind when travelling or leaving your vehicle unattended.
Key Features
Designed for 20L NATO/Wedco-style military jerry cans.
Heavy-duty stainless steel latch with integrated safety catch.
Keeps jerry cans securely mounted during off-road travel.
Lockable design helps protect fuel from theft.
Black powder-coated stainless steel construction for superior durability.
Corrosion-resistant finish for long-lasting performance.
Vertical mounting configuration saves valuable storage space.
Ideal for touring, overlanding, camping, and work vehicles.
Benefits
Provides secure transport of fuel in challenging conditions.
Reduces movement and vibration of mounted jerry cans.
Offers additional security with optional padlock compatibility.
Built to withstand years of off-road use and exposure to the elements.
Compatibility
Suitable for 20L NATO/Wedco-style military jerry cans.
Compatible with padlocks for added security.
Not suitable for Scepter-style fuel containers.
Not suitable for roof rack fitment.
Important Information
Jerry can and padlock sold separately.
The retaining strap covers the jerry can cap for enhanced security.
Designed for vertical mounting applications only.
Warranty
Manufactured to Front Runner's high-quality standards, providing dependable performance for long-term touring and off-road use.
FRONT RUNNER Land Rover Defender 90/110 (1983-2016) Fender Protector /...
$215.10
$239.00
A 1.6mm thick aluminium tread plate that fits on top of the fender of your vehicle for added protection.
Made from black powder coated aluminium.
Protects the fender against dents and scratching.
Suitable for all Defender models.
BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front RunnerMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.2kg (4.85lbs)Shipping Dimensions:Width: 380mm (15")Length: 1130mm (44")Height: 35mm (1")Shipping Weight:Weight: 2.2kg (5lbs)
FRONT RUNNER Suzuki Jimny (2018-Current) Ladder - LASJ004
$222.30
$247.00
Everybody wants to get the much-liked shot of someone standing on the roof or rack when in a fantastic setting, but how do you get up there? With Front Runner's 4-step ladder, of course. It has rubber grips on both the top and bottom steps and has been powder-coated black for an attractive finish. Accessing your camping or adventure gear on your rack has never been easier.
This ladder bolts to the rear swing door and existing points of a Suzuki Jimny (2018-Current).
Suitable for the 3 door and 5 door models.
The ladder has 4 steps.
Rubbers grips on the top and bottom steps.
Length from bottom step to top step is 950mm / 37.4".
Made with off-road tough black powder-coated high-strength steel and aluminum for maximum durability and strength.
Fitment guide and installation hardware included.
Features
Consists of:
1 x Suzuki Jimny Ladder
Installation Hardware
Fitment Instructions
Materials used:
Black powder coated steel and aluminium
Product Dimensions:
490mm (19.3") L x 135mm (5.3") W x 950mm (37.4") H
Weight:
3.15kg (6.9lbs)
Load Rating:
110kg (242.5lbs)
FRONT RUNNER Toyota Hilux Vigo Double Cab (2005-Current) Rear Seat...
$224.10
$249.00
Keep your passports, cash, valuable travel documents, and mobile devices out of sight and locked tight in this under the seat all steel vehicle safe.
All vehicle based adventures require you to carry valuables. Don’t leave on your next trip without a way to protect them. A vacation is not a vacation if you are worried about theft.
The Front Runner high security Rear Seat safe mounts out of sight, beneath the removable floor, yet is still easily accessible.
Manufactured with black powder coated 2mm thick steel.
Designed and built in South Africa - a country where crime deterrence is an art form.Please Note: Installation of this product requires a Rivnut tool. We suggest using the Rivnut tool / M6/M8.
Consists of:1 x Safe1 x Cam Lock incl. 2 keysInstallation HardwareFitting InstructionsMaterials used:Black powder coated steelProduct Dimensions:260mm (1.02") L x 500mm (19.7") W x 70mm (2.8") H (incl. lock)Opening Dimensions:156mm (6.1") L x 334mm (13.2") WWeight:2.44kg (5.4lbs)
LIGHTFORCE Striker Professional Edition Led Driving Light (Single Light )...
$227.70
$253.00
With a stylish rectangular form factor for a cool look on any 4X4, SUV or ute, and great all-round performance, Striker LEDs are the latest Driving Lights from the leader in performance lighting.
Australian made Striker LEDs are designed to perform to our consistently high standards. Their IP68 and IP69k ingress protection rating means they can handle a creek crossing and a high-pressure washdown after an adventure. With reduced radio interference technology included, you can listen to the radio without static. And a range of modular filters lets you modify the lights to suit your driving conditions.
Made in Australia
15 x high-quality LumiLED LEDs providing consistent high performance
LED spot reflectors with the ability to use modular filters to produce a wide driving light beam pattern or flood diffusion filter for work light environment
IP68 and IP69K resistant to water and dust ingress
77mm slim footprint for multiple mounting options
Reverse polarity voltage protection and high current waterproof connectors
PCB designed with reduced electromagnetic interference
CE certified
Thermal overload protection protects the light from overheating
Hard-wearing UV stable powder-coat finish
High-pressure diecast aluminium housing and bezel providing strength and weight reduction
Impact-resistant polycarbonate filter for added protection
Genuine Gore® waterproof membrane with mechanical seal
3 year warranty
Specifications
Distance: 1 lux at: 533m
Distance: 0.25 lux at: 1066m
Effective Lumens: 3466 (Individual)
Raw Lumens: 5625 (Individual)
Colour Temperature: 5000K
CRI: 70
Current Draw: 4.4Amps @ 13.2V
Voltage Range: 10V - 36V DC
Wattage: 60W
Ingress Protection Rating: IP68, IP69K
Weight: 1Kg (Including Mounts)
What's Included
Single light contains one light,cover, and mounting hardware, no wiring harness (available separately).
1 x Striker Professional Edition LED Driving Lights (STRIKERLEDPK)
1 x Clear filters with Lightforce logo
1 x Reversible mounting hardware
1 x User instructions
Compatibility
Universal
FRONT RUNNER 105A Battery Box- - BBRA001
$229.50
$255.00
This box allows you to mount an additional battery for your vehicle onto any flat surface, held safe and secure, away from damage.
Product Dimensions:392mm (15.4") L x 183mm (7.2") W x 252mm (9.9") H
Internal Dimensions:340mm (13.4") L x 180mm (7.1") W x 210mm (8.3") H
FRONT RUNNER Wind Fairing For Rack / 1255Mm (W) -...
$234.00
$260.00
This Wind Fairing will reduce drag and wind noise while pushing airflow up and over your rack's cargo. It's easy to secure the Wind Fairing to your rack in just three simple steps.
Note: May interfere with sunroof operation on some vehicles.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
1 x Protective Vinyl Strip
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1180mm (46.5") L x 2.5mm (0.1") W x 167mm (6.6") H
Weight:
1.9kg (4.2lbs)
FRONT RUNNER Footwell Water Tank - WTAN022
$239.40
$266.00
This cleverly designed 40l (10.6gal) polyethylene tank is extremely strong and is shaped to sit on the vehicle's floor behind the front seats.
This cleverly designed 40l (10.6gal) tank is extremely strong and is shaped to sit on the vehicle's floor behind the front seats.
Made from food grade polyethylene and is BPA free.
The cutout spans the transmission tunnel and the top section can be used as a nonslip floor or stacking supplies/luggage on top of.
This design allows for fitment into most vehicles.* Please check specs to confirm correct fitment before purchase.
If children are to be seated in the rear, the tank can be strapped to the front seat mounts using normal ratchet tie down straps.
The tank has plastic pipe fittings on each side for connection of a hose and tap. (Hose kits and taps are not included)
The Water Tank Hose Kit are sold seperately.
This product will not fit in the Toyota FJ Cruiser, Lexus GX 470, Suzuki Jimny or 3dr Jeep Wranglers.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Material used:Tank: BPA-free polyethyleneFittings: PlasticCapacity:40l (10.6gal)Product Dimensions:W 1200mm (47.2") x H 180mm (7.1") x L 250mm (9.8")Cut-out:W 210mm (8.3") - W 300mm (11.8") x H 110mm (4.3")Weight:4.98kg (11lbs)Special NotesSKU; CR1297-GY-COMP
FRONT RUNNER Wind Fairing For Rack / 1345Mm/1425Mm(W) - RRAC144
$247.50
$275.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Please Note: Not suitable for Jeep Wrangler JK, JL or JT.
May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1267mm (49.9") L x 2.5mm (0.1") W x 176mm (6.9") H
Weight:
1.3kg (2.9lbs)
FRONT RUNNER 14In Led Light Bar Sx300-Sp / 12V/24V /...
$252.90
$281.00
This set of brackets secures either the LIGH186 or LIGH187 to the Front Runner Roof Rack.
The mounting brackets secure this light bar on the front of your Rack by using the top T-slots of the front combined slat profile or side placement by using the T-slots of the tray slats.
All components are made of Steel and sealed with the same durable, weather-resistant black powder coating as the Front Runner Roof Racks.
Includes all installation hardware and fitting instructions.
Consists of:1 x Lightbar1 x Bracket set1 x Bolt Kit
Product Dimensions:Lightbar:182mm (7.2") L x 61.5mm (2.4") W x 38mm (1.5") H
Lightbar with supplied brackets:182mm (7.2") L x 63.5 (2.5") W x 50mm (1.2") H
Weight:440g (15.5oz)
Special Notes:Product Type: On-roadSKU: LEDDL105-SPLumens: 130012/24V14W1.17 AmpsColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 yearsECE Reference: 10Special NotesSKU; LEDDL105-SP
FRONT RUNNER Wind Fairing For Rack / 1475Mm(W) - RRAC145
$260.10
$289.00
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Note: May interfere with sunroof operation on some vehicles.
Features
Consists of:
1 x Wind Fairing
4 x Brackets
1 x Rubber Blade
Installation Hardware
Fitting instructions
Materials used:
Black powder coated aluminum
EPDM Rubber
Product Dimensions:
1400mm (55.1") L x 2.5mm (0.1") W x 173mm (6.8") H
Weight:
1.5kg (3.3lbs)
LIGHTFORCE Venom Professional Edition Led Driving Light - VENOMLED150
$273.60
$304.00
FEATURES:
Made in Australia
75W LED / 8820lm (raw) for industry-leading output
21 x high-quality Lumileds LEDs that provide consistent performance
LED spot reflector with the ability to use a combination modular filter
66mm slim footprint that provides multiple mounting options
3 stage operation: Full intensity, day time, or nighttime positioning options
Reverse polarity voltage protection and high current waterproof connectors
CISPR25 compliant, reduced radio frequency interference technology
Thermal overload protection prevents light from overheating
Hard-wearing UV stable powder coat finish
IP69K rated / Gore® waterproof membrane to protect against water and dust
Pressure diecast aluminium housing and bezel providing lightweight strength
Impact-resistant polycarbonate filter for added protection
3 year warranty.
PRODUCT SPECIFICATION
More Information
Distance: 1 lux at
939m (Pair)
Effective Lumens
5764
Raw Lumens
8820
Colour Temperature
5000K
CRI
70
Current Draw
5.7Amps @ 13.2V
Voltage Range
10V - 32V DC
Wattage
75W
Ingress Protection Rating
IP69K
Weight
1.2kg Including Bracket
DIRECTION-PLUS Universal Provent Oil Separator Kit - PV200DPK
$278.06
$308.95
Direction-Plus™ Universal ProVent® oil separator PV200DPK kit comes with drain and adapters. It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. . It protects your diesel engine by substantially reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system. Direction-Plus™ ProVent® systems are specifically designed to separate and redirect oil and air from blow-by gas produced from within the crank case. They also provide the option of returning the oil back to the sump. By not fitting a Direction-Plus™ ProVent® system it is likely that your engine will experience a progressive reduction in performance.
Advantages of The Direction-Plus™ ProVent® Oil Separator PV200DPK Kit:
• Up to 200 l/min blow-by gas
• Very compact design
• Available with high-efficiency or ultra-efficiency medium \n• Integrated pressure regulation for crankcase
• Also available with bypass valve (integrated in separation element)
• Tool-free element replacement with protection against incorrect insertion through turn-lock mechanism and element with integrated handle
• Suitable for use with open or closed CCV system
• Use of two ProVent 200 in parallel possible
• Check valve for oil return available (recommended)
MSA Basket Pack (Small) - BP1.2
$285.30
$317.00
Dimensions (cm) 120L x 90W x 30H
FEATURES:
Manufactured from 15oz polyester/cotton blend canvas impregnated with DuPont Teflon Repel.
100% breathable and waterproof.
YKK Chunky zip with double lockable metal sliders on 3 sides.
50mm Velcro-style dust seal covers the zip 100%
Attached 50mm seat belt harness system.
Extra 50mm Velcro-style tie-downs
Integrated anti-flap design on all harness straps.
Heavy-duty 2mm laminated PVC & canvas base for extra protection.
Removable rain, dust & scrub resistant cover for extra protection.
Supplied with a separate storage bag.
Guaranteed not to deteriorate even in extreme weather conditions
FRONT RUNNER Gas/Propane Bottle Holder / Side Mount- - GBHO014
$286.20
$318.00
Transport and store you gas/propane bottle onto the side of your vehicle with this high strength steel holder.
This Gas/Propane holder mounts to the side of your vehicle or trailer.
For installation, drilling is required.
This holder features a black powder coated high strength steel gas bottle bracket and adjustable clamp to accommodate gas bottles with a diameter of 210mm (8.3") up to 290mm (11.4").
The bracket is lockable with the Rack Accessory Lock / Small.
Supplied with installation hardware.
Consists of:1 x Gas Bottle Back Plate1 x Gas Bottle Base Plate1 x Adjustable Gas Bottle ClampInstallation HardwareFitting Instruction
Materials used:Black powder coated high strength steel
Assembled Product Dimensions:358mm (14") L x 294mm (11.5") W x 205mm (8") H
Weight:4.5kg (9.92lbs)Suitability:Holds gas bottles ranging from 210mm (8.3") to 290mm(") in diameter
FRONT RUNNER Narrow Slat / 1345Mm (Pair) - RRNS1345
$292.50
$325.00
These slats can be added to a Slimpro Van Rack to create a custom configuration, additional support and extra mounting points.
All hardware and brackets are included to fit to your existing Slimpro Van Rack
These slats will work with any Front Runner Slimpro Van Rack that uses 1345mm slats.
Features T-slots on both the top and bottom faces.
The T-slots allow for quick fitting and removal of accessories and equipment.
Made from the same black powder-coated aluminum as all Front Runner Racks.
Features
Consists of:
1 x Pair of Narrow Slats / 1345mm
Installation Hardware
Materials used:
Black powder coated aluminium
Product Dimensions:
1339mm (52.7") L x 60mm (2.4") W x 23mm (0.9") H
Weight:
4kg (8.8lbs)
FRONT RUNNER Toyota Land Cruiser 76 Under Console Safe -...
$301.50
$335.00
The safe is bolted to the body of the vehicle and the original centre console reinstalled to the top of the safe.
Installs easily using supplied installation kit and installation guide.
This robust safe is manufactured with 2mm thick mild steel and a tamper proof cam lock.
Powder coated black.
Carpet lined.
Note: Not suitable for Left-hand drive vehicles.
Features
Consists of:
1x Under Console Safe
2x Keys supplied
Installation kit
Materials used:
Black powder-coated mild steel with carpeted base
Product dimensions:
L 535mm (21.1") x W 205mm (8.1") x H 205mm (8.1")
Weight:
4.3kg (9.5lbs)
FRONT RUNNER Land Rover Defender (1983-2016) Side Mount Jerry Can...
$305.10
$339.00
The same trusted and off-rough tough Front Runner lockable Jerry Can Holder, only conveniently reconfigured to mount on the side of the vehicle via a gutter mount.
The adjustable stainless steel latch with safety catch holds your Jerry Can firmly in place over a lifetime of off-road abuse.
For use with 20l / 5.3 gallon NATO/Wedco style military cans.
This strap covers the Jerry can cap. Add your own padlock or Rack Accessory Lock / Small and you'll never have to worry about stolen fuel while on the road.
Simple installation that uses an existing pop-rivet hole.
Made of durable black powder coated high strength steel and designed to mount to the rain gutter on vehicles like the classic Land Rovers.
Note: Will not work with Scepter style cans.Note: This Jerry Can Holder is not compatible with the Land Rover New Defender.
Consists of:1 x Side Mount Jerry Can HolderInstallation HardwareFitting Instruction
Materials used:Black powder coated high strength steel
Product Dimensions:230mm (9.1") L x 385mm (15.2") W x 711mm (28") H
Weight:5.5kg (12.1lbs)
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
