HMX 8 S-LD-SW marine coaxial speaker features a white sports grille for a perfect match with sporty boats. The coaxial speaker is engineered to operate in open water, pleasing you with the incomparable emotions of music for years on end thanks to the special ASA plastic grilles and polypropylene cone with co-molded Santoprene surround. The Aramid fiber spider with silicone-insulated lead wire ensures durability and constant performance over time. Parts and assembly methods are designed to meet high-humidity marine environments, ensuring the best audio performance season after season.   Component HI-END LED COAX Size mm (in.) 224 (8.8) Power Handling - Continuous W 100 Power Handling - Peak W 200 Impedance Ohm 4 Depth mm (in.) 123 (4.84) Tweeter diaphragm mm (in.) 36 (1.4) Woofer Voice Coil Ø mm (in.) 32 (1.26) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 45 ÷ 25k Woofer Magnet size D x d x h mm (in.) 90 x 40 x 20 (3.54 x 1.57 x 0.79) Tweeter Magnet size D x h mm (in.) 19,7 x 3 (0.78 x 0.12) Weight of one speaker kg (lb.) 1,66 (3.66) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome PEI Xmech mm (in.) ±8,5 (0.33) D mm 174 Re Ohm 3,1 Fs Hz 50 Le mH 0,52 Vas I 29,46 Mms g 27,3 Cms mm/N 0,37 BL T*m 6,6 Qts 0,58 Qes 0,61 Qms 11 Spl dB 91 A 225 mm 8.86 in. B 180 mm 7.09 in. C 128.6 mm 5.06 in D 91 mm 3.58 in. F 37.6 mm 1.48 in.

Hertz marine In-Ceiling speaker is designed to deliver thrilling sound with a near stealth installation. Engineered to be incredibly durable, they are fine-tuned for in-wall positioning providing top audio performance from very discreet designs. This includes an advanced crossover built with marine conformal coated PCB encapsulated in a sealed enclosure to prevent corrosion.  Component IN-CEILING COAX Size mm (in.) 165 (6.5) Power Handling - Continuous W 50 Power Handling - Peak W 100 Impedance Ohm 6 Depth mm (in.) 87 (3.43) Tweeter diaphragm mm (in.) 24 (0.9) Woofer Voice Coil Ø mm (in.) 25 (1) Tweeter Voice Coil Ø mm (in.) 20 (0.8) Frequency Response Hz 50 ÷ 22k Woofer Magnet size D x d x h mm (in.) 75 x 32 x 15 (2.95 x 1.26 x 0.59) Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12) Weight of one speaker kg (lb.) 1.75 (3.86) Woofer Magnet High density flux ferrite Tweeter Magnet Neodymium Cone Polypropylene with UV inhibitors Dome Tetolon Xmech mm (in.) ≤4,8 (0.19) D mm 125 Re Ohm 5 Fs Hz 60 Le mH 0.32 Vas I 10.48 Mms g 14.2 Cms mm/N 0.50 BL T*m 5.3 Qts 0.81 Qes 0.98 Qms 4.8 Spl dB 88 A 231 mm 9.08 in. B 203.5 mm 8.01 in. C 87 mm 3.43 in. D 81 mm 3.2 in. E 6mm 0.23 in.

Hertz MLCX 2 TW.3  car audio crossover provides the ability to realize a bi-amplified system, that is, to connect two amplifiers, or anyway two separate channels, to the crossover, so making it possible to drive woofer and tweeter separately. The significant power increase with this configuration highlights all the features of the MLK 1650.3 Legend system, with all the advantages coming from the multi-amplification. Besides, thanks to the Mid-Contour and Hi-Contour controls, dedicated to the management of woofer cut-off frequency and tweeter cut-off frequency respectively, the cross-point can be varied. Through each of these two Contour controls, featuring a two-position selector, the system frequency response can be fine-tuned, adjusting it according to the different acoustics of the cars and the different speaker placements and, most of all, the listener can achieve their favourite sound. 1. Bi-amplification available, selectable through appropriate hi-current rating switch with hi-current carrying capability.2. Mid-Contour two-position control, for a linear mid-bass frequency response according to the woofers position in the car and the listener s favourite sound.3. Hi-Contour two-position control, to select the tweeter hi-pass crossover point selection according to the tweeter position/angle towards the listener.4. Mid-Contour in conjunction with Hi-Contour provides the ability to use MLCX 2 TW.3 to build a two way system based on ML 1650.3 or ML 1800.3 woofer together with ML 280.3 tweeter.5. Three-position switch for tweeter level adjustments in 2 dB steps, to fine-tune thetransducer s emission.6. Hi-Boost control, selectable through appropriate switch, to provide better linearity of the tweeter emission above 10kHz when positioned not on axis to with the listener.7. Extremely high quality bi-metallized 160V polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.8. Air wound inductors built on pure copper-wire with up to 1mm diameter, for high saturation threshold of the magnetic flux and low losses on the woofer section where high transient currents are demanded.9. High power rating Wirewound resistors, to ensure performance stability even at high operating temperature. The Wirewound build construction grants low parasitic series inductance thus reducing losses at high frequencies, especially for resistors in series to the tweeter. Component Crossover Power Handling - Peak W 300 Power Handling - Peak Note 150 Depth mm (in.) 41 (1.68) Adjustment Tweeter            +2 / 0 / -2 dBHi-Boost           ON / OFFHi-Contour       ON / OFFMid-Contour    ON / OFFBi-Amp              ON / OFF Weight of one component - Crossover kg (lb) 0,57 (1.26) Crossover Woofer      Lo-pass 6 dB Oct.Tweeter     Hi-pass 12 dB Oct.Cut-off        2.5 kHz (Mid/Hi-Cont. = ON)3.5 kHz      (Mid/Hi-Cont. = OFF) G 195 mm 7.67 in. H 119 mm 4.68 in. I 41 mm 1.61 in.

NEO line bullet tweeters are a totally new project, lighter and more compact compared to the previous ST 35 and with superior performance thanks to the use of Neodymium N38 H for the motor units and a FEM (Finite Element Method) optimized driver/horn design. The “Active” version, ST 35A Neo provides tweeter only. Component HIGH EFFICIENCY COMPRESSION DRIVER Size mm (in.) 46 (1.8) Power Handling - Peak W 120 Power Handling - Peak Note Hi-pass filtered @ 5 kHz - 12 dB Oct. Impedance Ohm 4 Voice Coil Ø 35 (1.4) Frequency Response Hz 2k ÷ 20k Weight of one component kg (lb.) 0,53 (1.17) Magnet Neodymium Dome Aluminium D mm 46 Re Ohm 3,3 Fs Hz 4000 Le mH 0,02 BL T*m 3,5 Spl dB 109 A 69 mm 2.72 in. B 52 mm 2.05 in. C 65,7 mm 2.59 in. D 33,3 mm 1.31 in.

The MP 70.3 car audio mid-range speakers featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165P.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. Component Mid-range Size mm (in.) 70 (3) Power Handling - Peak W 100 Power Handling - Peak Note (Hi-Pass filtered @250Hz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 20 (0.8) Frequency Response Hz 180 ÷ 18k Magnet size D x d x h mm (in.) 19.7 x 0 x 2 (0.78 x 0 x 0.08) Weight of one speaker kg (lb.) 0.17 (0.37) Magnet Neodymium Cone Pressed-pulp cone with cotton fibers D mm 65 Re Ohm 3,7 Fs Hz 110 Le mH 0,12 Vas I 1 Mms g 2,9 Cms mm/N 0,7 BL T*m 2,8 Qts 0,82 Qes 1 Qms 4,6 Spl dB 88 A 87,8 mm 3,46 in. B 73 mm 2,87 in. C 50 mm 1.97 in. D 44 mm 1.73 in. E 93 mm 3.66 in. F 17 mm 0.67 in.

The MP 25.3 car audio tweeters, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response.Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection.The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage. Component Tweeter Size mm (in.) 29 (1.14) Power Handling - Peak W 120 Power Handling - Peak Note (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.) Impedance Ohm 4 Voice Coil Ø 25 (1) Frequency Response Hz 1.4k ÷ 22.5k Magnet size D x d x h mm (in.) 24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14) Weight of one speaker kg (lb.) 0.07 (0.14) Magnet Neodymium Dome Tetolon D mm 29 Re Ohm 3,9 Fs Hz 1200 Le mH 0,02 Vas I - Mms g 0,17 Cms mm/N 0,1 BL T*m 1,6 Qts 0,55 Qes 1,98 Qms 0,57 Spl dB 91 A 44 mm 1.73 in. B 41 mm 1.61 in. C 27 mm 1.06 in. D 17 mm 0.67 in.

The Audison B-CON is an advanced Bluetooth 5.0 receiver specifically designed for automotive use, which has obtained the "Hi-Res Audio Wireless" certification from the Japan Audio Society. This device is the ideal choice for those seeking high-quality audio streaming from Hi-Res players such as Fioo or Sony Walkman, as well as from the latest Android and Apple smartphones. The B-CON is compatible with all audio formats and delivers maximum performance with uncompressed Bluetooth streaming (up to 96 kHz / 24 bit), available only on Android devices compatible with the LDAC codec. This allows for superior sound quality when playing local audio files or using streaming services like Tidal and Qobuz. The device integrates RCA analog outputs and Toslink optical digital outputs, offering versatile connections to high-quality audio systems. With the implementation of the LDAC codec, the B-CON ensures a frequency response up to 40 kHz, providing an immersive and faithful listening experience. Additionally, the B-CON supports handsfree call management and features "Absolute Volume" to preserve the dynamic range of the audio signal, preventing quality loss during volume adjustments. In summary, the Audison B-CON is an essential accessory for car audio enthusiasts seeking a superior listening experience without compromising sound quality.   Receiver Tech Data Power Supply Voltage 6 ÷ 24 VDC Idling Current 70 mA Remote IN 3 ÷ 12 VDC (0.5 mA) Bluetooth Data Type: Bluetooth 5.0 + EDRCodec: LDAC, AAC, SBCProfile: Bluetooth A2DP 1.3, AVRCP 1.6 Digital Input Optical: S/PDIF Optical (Max 24 bit/192 kHz) Digital Output Optical: S/PDIF Optical (Max 24 bit/192 kHz) Analog Output Performance Bandwidth (Max) 20 ÷ 48k HzOutput Level 2 VRMSDistortion – THD @1 kHz, 1 VRMS 0.003%S/N RATIO (A weighted) 100 dBA   Features Up to 96 kHz / 24-bit BT streaming LDAC codec compatibility for Android devices ACC codec compatibility for iOS devices Automatic handsfree call manage Absolute volume function, to ensure a full dynamic range audio signal Digital output Analog RCA outputs Digital optical input with pass-through capability to the Digital output (no DA/AD signal conversion) Additional micro-USB power plug for non-automotive use

The MPCX 2 TM.3 car audio crossover is specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven. Component Crossover Adjustment Tweeter   0 / +2 dB Weight of one component - Crossover kg (lb) 0,16 (0.35) Crossover Midrange   Low pass 5,5 kHz @ – 6 dB Oct.Tweeter      Hi pass 5,5k Hz @ – 12 dB Oct. Physical Specs G 102 mm 4.02 in. H 76,5 mm 3.01 in. I 37 mm 1.46 in.   Features 1. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission.2. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies.3. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded.4. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.5. Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven.