FRONT RUNNER Rsi Smart Canopy Slimline Ii Rack Kit /...
$1,399.50
$1,555.00
This kit creates a full size rack on a RSI Canopy with a roof top size of approximately 1165mm/45.9" (W) x 1358mm/53.5" (L). The Slimline II Tray mounts to supplied Feet that slide in to the canopy track.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.All Front Runner Racks are backed by a Limited Lifetime Warranty*Note: This Kit does not fit Volkswagen Amarok Double Cab Canopies. Please use .
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner3 x RRAC921 - Canopy Rack Kit Installation Set1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.3kg (51.4lbs
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:23.1kg (51.0lbs)
FRONT RUNNER Rsi Extra Cab Smart Canopy Slimline Ii Rack...
$1,543.50
$1,715.00
This 1762mm/69.4'' long, full-size, Slimline II cargo carrying roof rack kit for the RSI Extra Cab Smart Canopy contains:
Slimline II Tray
Wind Deflector
6 Feet
Installs easily into the existing factory/OEM roof tracks with no drilling required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Volkswagen Amarok Single Cab Slimline Ii Rsi Canopy...
$1,615.50
$1,795.00
The rack size is approximately 1255mm/49.4'' (W) x 1762mm/69.4'' (L). The Slimline II Tray mounts to supplied feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: RSI Canopies are color-coded to your vehicle and have a lead time of 10 working days to manufacture.
FRONT RUNNER Volkswagen Amarok Double Cab Rsi Canopy Slimline Ii...
$1,345.50
$1,495.00
The rack size is approximately 1255mm/49.4'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track.
All Front Runner Rack Kits contain installation instructions and all of the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Rhinoman Canopy Slimline Ii Rack Kit / 1165Mm(W)...
$1,286.10
$1,429.00
All Front Runner Rack Kits contain installation instructions as well as all components needed to mount the Slimline II Tray to the canopy. All Front Runner Racks are backed by a Limited Lifetime Warranty*
KRCA076T - Rhinoman Canopy Slimline II Rack Kit / 1165mm(W) x 1358mm(L) - by Front Runner
Consisting of:
3 x FASS024 - Foot Set / 50mm-60mm - by Front Runner1 x RRSTA07 - Slimline II Tray - 1165mm(W) X 1358mm(L) - by Front Runner
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 23.1kg (50.9lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 450mm (18.0")Length: 1615mm (64.0")Height: 140mm (6.0")
Shipping Weight:23.0kg (51.0lbs)
FRONT RUNNER Rsi Single Cab Smart Canopy Slimline Ii Rack...
$1,543.50
$1,715.00
The Front Runner Rack Kit mentioned is designed to create a full-size rack on a RSI Canopy with specific roof top dimensions of approximately 1165mm/45.9'' (W) x 1762mm/69.4'' (L). The kit includes a Slimline II Tray that mounts to the supplied Feet, which easily slide into the existing RSI canopy track. This setup ensures a secure and straightforward installation process without the need for any modifications.
As with all Front Runner Rack Kits, this one also includes comprehensive installation instructions to guide you through the setup. Additionally, all the necessary components required to mount the Slimline II Tray to the canopy are included in the kit, ensuring a hassle-free assembly.
Front Runner is known for producing durable and reliable racks, and to provide added peace of mind, all Front Runner Racks are backed by a Limited Lifetime Warranty. This warranty ensures that the rack is covered for any manufacturing defects or issues that may arise during its lifetime of use.
With this Front Runner Rack Kit, you can conveniently transform your RSI Canopy into a full-size rack, expanding its carrying capacity and versatility. The easy installation process and warranty coverage make it a valuable upgrade for your vehicle.
FRONT RUNNER Nissan Navara D23 Double Cab (2014-Current) Rsi Canopy...
$1,286.10
$1,429.00
The Front Runner Rack Kit provided is specifically designed for the Nissan Navara RSI Canopy. The kit includes a full-size rack with dimensions approximately 1165mm/45.9'' (W) x 1358mm/53.5'' (L). The Slimline II Tray mounts to supplied Feet that slide into the canopy track, ensuring a secure and easy installation process.
As with other Front Runner Rack Kits, this one also contains comprehensive installation instructions, making it easier for you to mount the Slimline II Tray to your vehicle. Additionally, all the necessary components required for the installation are included in the kit, so you won't have to purchase anything separately.
The Front Runner Racks are known for their quality and durability, and to provide peace of mind, they are backed by a Limited Lifetime Warranty. This warranty ensures that you have support in case of any manufacturing defects or issues with the rack.
Please note that RSI Canopies are color-coded to match your vehicle and have a lead time of 10 working days for manufacturing. Make sure to consider this additional time when planning your installation.
Overall, this Front Runner Rack Kit offers a great solution for adding extra storage capacity to your Nissan Navara RSI Canopy, and with its easy installation and warranty coverage, it provides a reliable and long-lasting upgrade for your vehicle.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,514.60
$2,794.00
The Rack Kit provided is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2772mm/109.1'' (L). It includes a Slimline II Tray and eight (8) supplied Feet that mount onto the OEM/Factory installed track of your canopy/shell or trailer.
Please be aware that depending on the specific make and model of your canopy or trailer, additional fasteners may be required to properly fit the OEM/Factory supplied tracks. It is essential to check the compatibility of the supplied hardware with your existing canopy track before installation.
All Front Runner Rack Kits come with comprehensive installation instructions to guide you through the mounting process. The kit includes all the necessary components needed to securely attach the Slimline II Tray to your vehicle.
To ensure that the Front Runner Feet and supplied hardware work seamlessly with your OEM/Factory supplied canopy track, the track must meet the following specifications:
Slot base width: minimum 20mm, maximum 25mm
Slot base height: minimum 6.5mm, maximum 10mm
Slot opening width: minimum 8.5mm, maximum 10.5mm
Slot opening height: minimum 2mm, maximum 5mm
Before proceeding with the installation, it is highly recommended to check with the canopy manufacturer to determine the load ratings and capacity limits for your specific canopy and track. Adhering to the load ratings is crucial for safe and reliable use of the rack.
Lastly, all Front Runner Racks are covered by a Limited Lifetime Warranty, providing assurance of the product's quality and durability over the long term.
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,836.80
$3,152.00
The Rack Kit provided is intended for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2772mm/109.1'' (L). The kit includes a Slimline II Tray that mounts to eight (8) supplied Feet, which slide into the supplied Track. The 2 x 1150mm/45.3 long pair of tracks can be easily mounted to your canopy/shell or trailer.
For detailed instructions on how to install the tracks, please refer to the Track installation instructions available in the INSTALL tab of the Rack Kit.
Each Front Runner Rack Kit includes installation instructions and all the necessary components needed to securely mount the Slimline II Tray to your vehicle. It is important to follow these instructions carefully to ensure proper installation and functionality.
As with other Front Runner Rack Kits, this one is also covered by a Limited Lifetime Warranty, providing assurance of the product's quality and durability.
Please note that this rack kit is designed for specific roof top sizes, so make sure your canopy, camper shell, cap, or trailer fits within the specified dimensions to ensure compatibility with the rack.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,379.60
$2,644.00
This Rack Kit is designed specifically for truck canopies, camper shells, caps, and trailers that have roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2570mm/101.2'' (L). The kit includes a Slimline II Tray and eight (8) supplied Feet that securely mount onto the OEM/Factory installed track of your canopy/shell or trailer.
Please be aware that while the kit comes with all the necessary components for installation, additional fasteners might be required to properly fit OEM/Factory supplied tracks.
To ensure successful installation, all Front Runner Rack Kits include detailed installation instructions. The Front Runner Feet and supplied hardware are specifically designed to work with your OEM/Factory supplied canopy track, provided that the track meets the following specifications:
Slot base width: minimum 20mm / maximum 25mm
Slot base height: minimum 6.5mm / maximum 10mm
Slot opening width: minimum 8.5mm / maximum 10.5mm
Slot opening height: minimum 2mm / maximum 5mm
Before proceeding with installation, it's important to check with the canopy manufacturer to determine the load ratings for your specific canopy and track. This will ensure that the rack is compatible and safe to use.
As an added benefit, all Front Runner Racks are backed by a Limited Lifetime Warranty, providing peace of mind regarding the quality and durability of the product.
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,701.80
$3,002.00
This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2570mm/101.2'' (L).
The Slimline II Tray mounts to eight (8) supplied Feet that slide into the provided Track. The 2 x 1150mm/45.3'' long pair of tracks can be easily mounted to your canopy/shell or trailer. For detailed instructions on how to install the tracks, please refer to the Track installation instructions in the INSTALL tab.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The Rack Kit is specifically designed to work with the given roof top sizes and is backed by a Limited Lifetime Warranty, providing peace of mind regarding the product's quality and durability.
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,244.60
$2,494.00
Roof Top Size: Approximately 1475mm/58.1'' (W) x 2368mm/93.2'' (L)
The Slimline II Tray mounts to eight (8) supplied Feet that attach to the OEM/Factory installed track of your canopy/shell or trailer.
Note: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits include installation instructions and all the necessary components to mount the Slimline II Tray to your vehicle.
For Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have the following specifications:
Slot base width: min 20mm / max 25mm
Slot base height: min 6.5mm / max 10mm
Slot opening width: min 8.5mm / max 10.5mm
Slot opening height: min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty.
This information provides details about the Front Runner Rack Kit, including its compatibility with specific roof top sizes and the requirements for the OEM/Factory installed track. It's important to check the load ratings from the canopy manufacturer to ensure safe use.
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,566.80
$2,852.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2368mm/93.2'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 2 x 1150mm/45.3” long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$2,109.60
$2,344.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2166mm/85.3'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer.
NOTE: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
**Please check with canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,352.60
$2,614.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 2166mm/85.3'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 2 x 750mm/29.5 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,960.20
$2,178.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 1964mm/77.3'' (L). The Slimline II Tray and eight (8) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. Please note that additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have the following dimensions:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$2,203.20
$2,448.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 1964mm/77.3'' (L). The Slimline II Tray mounts to eight (8) supplied Feet that slide into the supplied Track. The 2 x 750mm/29.5 long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,765.80
$1,962.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 1762mm/69.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. Please note that additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have the following dimensions:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer Slimline Ii Rack Kit...
$1,779.30
$1,977.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 1560mm/61.4'' (L). The Slimline II Tray mounts to six (6) supplied Feet that slide into the supplied Track. The 1600mm/93” long pair of tracks can be easily mounted to your canopy/shell or trailer. See the Track installation instructions in the INSTALL tab for further details.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
FRONT RUNNER Ute Canopy Or Trailer With Oem Track Slimline...
$1,582.20
$1,758.00
This Rack Kit is designed for truck canopies, camper shells, caps, and trailers with roof top sizes no larger than approximately 1475mm/58.1'' (W) x 1560mm/61.4'' (L). The Slimline II Tray and six (6) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. Please note that additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have the following dimensions:
Slot base width min 20mm / max 25mm
Slot base height min 6.5mm / max 10mm
Slot opening width min 8.5mm / max 10.5mm
Slot opening height min 2mm / max 5mm
Please check with the canopy manufacturer regarding the load ratings for your specific canopy and track.
All Front Runner Racks are backed by a Limited Lifetime Warranty*