FRONT RUNNER Chevrolet Colorado/Gmc Canyon Retrax Xr 5In (2015-Current) Slimline...
$1,680.30
$1,867.00
Double up the loading space on your Chevrolet Colorado/GMC Canyon with this Slimline II Load Bed Rack Kit. The Slimline II’s lightweight, modular construction gives you the freedom to customize your rig with over 55 accessories so you can haul all your adventure gear and toys. This particular kit installs into the existing ReTrax XR rails of your Chevrolet Colorado/GMC Canyon.
This kit creates a full-size rack that sits above your Chevrolet Colorado/GMC Canyon’s (w/ReTrax XR rails) load bed. This Slimline II cargo carrying rack kit contains the Slimline II tray (1425mm x 1358mm) and 6 Pickup Truck Bed Universal Legs that fit into the existing ReTrax XR rails.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:3x LASS028 - Pick-Up Roll Top Leg Mount1x RRSTJ07 - SLII Tray - 1425mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 29.53kg (65.1lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 440mm (17")Length: 1730mm (68")Height: 240mm (9")
Shipping Weight:Weight: 30kg (66lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon Retrax Xr 5In (2015-Current) Double...
$537.30
$597.00
This dual set of Load Bars allows you to transport gear and attach Front Runner accessories above the bed of your Chevrolet Colorado/GMC Canyon when there’s no need for a full-sized bed rack. This low-profile solution fits into the existing ReTrax XR rails, and doesn’t compromise any of the load bed’s regular load-carrying ability, while the drop-down door functions as usual.
A set of Pickup Bed Load Bars used to transport gear over the bed of your Chevrolet Colorado/GMC Canyon when fitted with a ReTrax XR rails. This low profile solution includes 4 Pickup Roll Top Leg Mounts, 2 x 1425mm Load Bars that fit into the existing ReTrax XR rails, and fitting instructions.
The Load Bars are mounted via Pickup Roll Top Load Mounts that bolt directly into the existing ReTrax XR rails.
Allows for gear to be mounted above the pickup’s load bed.
The load bed retains its load-carrying ability, while the drop-down door functions as usual.
Uses the same strong, corrosion-free aluminum slats found in Front Runner Racks.
The sliding nut t-slots allow for quick fitting and removal of accessories and equipment on both the top and bottom of the slats.
Made from stainless steel and a durable, weather-resistant black powder coated aluminum.
Includes all hardware, components, and the installation guide needed to fit Load Bars on a vehicle.
Note: If your Roll Top extrusion has a 6mm (0.24") to 7mm (0.28") slot opening, you may need Track Mount Stud Plate for installation.
Note: The load per Load Bars must not exceed 55lbs or 25kg, and ensure the load is distributed evenly. For larger loads, additional Load Bars may be needed, please contact Customer Service for any enquiries.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:2x LASS028 - Pick-Up Roll Top Leg Mount1x LBSK016 - Roof Load Bar Pair 1425mm(W)Material Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 6kg (13.23lbs)The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Load Bar Kit, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot, Grab-On Foot listed above.If your Load Bar kit uses Legs, add the height of the Load Bar (22mm/ 7/8") to the height of the Legs listed above to determine the height of the rack from your vehicle's rain gutters.If your Load Bar kit uses Foot Rails, add the height of the Load Bar (22mm/ 7/8") to the height of the Foot Rails listed above to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:Width: 160mm (6")Length: 1500mm (59")Height: 155mm (6")Shipping Weight:Weight: 8kg (18lbs)
FRONT RUNNER Chevrolet Colorado/Gmc Canyon At4 Crew Cab (2023-Current) Slimline...
$1,516.50
$1,685.00
Unlock your Chevrolet Colorado/GMC Canyon AT4 Crew Cab external storage potential with the highly versatile yet rugged Slimline II Roof Rack kit. Gearing up for your next off-road trip, camping weekend, or overland journey of a lifetime is easy when you have an expansive and totally customizable load-carrying area.
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado/GMS Canyon AT4 Crew Cab. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:1x FACC004 - Chev Colorado/GMC canyon AT4 (2023 - current) Footrails1x RRSTD07 - SLII Tray - 1255mm(W)X1358mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 24.76kg (54.59lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 270mm (11")
Shipping Weight:Weight: 32kg (70lbs)
FRONT RUNNER Chevrolet Colorado /Gmc Canyon Zr2 2Nd Gen (2015-2022)...
$984.60
$1,094.00
Need external cargo carrying capacity for your Chevrolet Colorado /GMC Canyon ZR2 with the Cab Over Camper? Then look no further than the Slimline II Roof Rack Kit, which includes a tray, wind deflector and foot rails.
This 752mm/29.6” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado/GMC Canyon ZR2 2nd Gen. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
All Front Runner Racks are backed by a Limited Lifetime Warranty*
For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
KRCC012T - Chevrolet Colorado /GMC Canyon ZR2 2nd Gen (2015-2022) Cab Over Camper Slimline II Roof Rack Kit
Consisting of:1x FACC005 - Chev Colorado/GMC Canyon (15-22)ZR2 Shorty Foot1x RRSTD04 - SLII Tray - 1255mm(W)X752mm(L)
Material Used:Black epoxy powder - coated T6 aluminiumHigh strength steel
Approximate Installed Weight: 14.75kg (32.52lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
Shipping Dimensions:Width: 445mm (18")Length: 1720mm (68")Height: 280mm (11")
Shipping Weight:Weight: 20kg (44lbs)
FRONT RUNNER Chevrolet Colorado (2015-2022) Slimline Ii Roof Rack Kit...
$1,493.10
$1,659.00
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
This 1358mm/53.5” long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your Chevrolet Colorado. Drilling is required for installation.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller Pro Stainless Steel Prep Table Kit or 1 larger Pro Stainless Steel Camp Table Kit).All Front Runner Racks are backed by a Limited Lifetime Warranty*For further information on installation, please see the fitment instructions in the INSTALL tab.
Note: A maximum driving speed of 130km/80mi per hour should be adhered to, when equipped with a Front Runner Roof Rack or Load Bar kit.
Consisting of:
1 x FACC001 - Chev Colorado/GMC Canyon (2015-2022) Foot Rails - by Front Runner1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front RunnerMaterial used:
Black epoxy powder-coated T6 aluminiumHigh strength steel
Approximate Installed Weight 25kg (56lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.Shipping Dimensions:
Width 450mm (18")Length 1615mm (64")Height 140mm (6")
Shipping Weight:
Weight 29.4kg (64.8lbs)
FRONT RUNNER Bbq/Fire Pit And Wolf Pack Pro Kit -...
$386.10
$429.00
Grill and go with this BBQ/Fire Pit & Wolf Pack Pro Kit. The grill folds down and fits perfectly within the Wolf Pack to create the ideal camp cooking solution so all you have to do is choose your next adventure.
This kits contains the BBQ/Fire Pit and the Wolf Pack Pro.
A BBQ/Fire Pit that is designed to pack flat at 1.5 inches / 38mm thick.
Features a large grill surface area.
Sturdy base for safe grilling.
Quick and easy 30-second setup.
Sides of grill serve as a wind-break.
Safely contains your fire and keeps the fire elevated off the ground.
Constructed from high strength steel, providing high rust and corrosion resistance.
Supplied with gird lifting tools.
Stores neatly in the included Wolf Pack Pro.
Consists of:1 x BBQ/Fire Pit Assembly1 x Wolf Pack Pro
BBQ/Fire Pit Materials used:3CR12 Steel
BBQ/Fire Pit Dimensions:Open Dimensions:436mm (17.2") L x 436mm (17.2") W x 310mm (12.2") H
Close Dimensions:415mm (16.3") L x 310mm (12.2") W x 50mm (1.9") H
BBQ/Fire Pit Weight:7.9kg (17.4lbs)
Wolf Pack Pro Materials used:Polypropylene black plastic
Wolf Pack Pro Dimensions:External Dimensions:510mm (20.1") L x 400mm (15.7") W x 230mm (9.1") H
Internal Dimensions:445mm (17.5") L x 335mm (13.2") W x 203mm (8") H
Wolf Pack Pro Weight:3.65kg (8.1lbs)
Total Weight:11.6kg (25.6lbs)
STORE PICK-UP ONLY- FRONT RUNNER Alu-Cab Roof Top Tent Mount...
$333.00
$370.00
Now, you can easily mount an Alu-Cab tent to your reliable Front Runner Roof Rack, thanks to this black powder-coated steel Tent Mount Kit, which consists of four brackets and two support channel, plus all the necessary nuts and bolts.
Mount your Alu-Cab tent with this specifically made Tent Mount Kit to the Front Runner Roof Rack.
This kit consists of four (4) x Tent Mount Bracket/Standard which match the roof rack's low profile (30mm H) and two (2) 1255mm slats to support your tent.
They are made from black powder-coated steel, have pre-cut mounting holes and all mounting pieces (eg. bolts and nuts) are included.
Additional Alu-Cab tent mount kit, Alu-Cab Roof Top Tent Mount Kit / 1425mm is available.
Consists of:2 x Tent Mount Bracket/Standard1 x Roof Load Bar Pair 1255mm(W)Fitting instructionsInstallation hardware
Materials used:Black powder-coated steel
Product Dimensions:244mm (9.6") L x 60mm (2.4") W x 25mm (1") H (Single Bracket)
Weight:4.34kg (9.6lbs)
STORE PICK-UP ONLY- FRONT RUNNER Alu-Cab Roof Top Tent Mount...
$307.80
$342.00
Now, you can easily mount an Alu-Cab tent to your reliable Front Runner Roof Rack, thanks to this black powder-coated steel Tent Mount Kit, which consists of four brackets and two support channel, plus all the necessary nuts and bolts.
Mount your Alu-Cab tent with this specifically made Tent Mount Kit to the Front Runner Roof Rack.
This kit consists of four (4) x Tent Mount Bracket/Standard which match the roof rack's low profile (30mm H) and two (2) 1255mm slats to support your tent.
They are made from black powder-coated steel, have pre-cut mounting holes and all mounting pieces (eg. bolts and nuts) are included.
Additional Alu-Cab tent mount kit, Alu-Cab Roof Top Tent Mount Kit / 1425mm is available.
Consists of:2 x Tent Mount Bracket/Standard1 x Roof Load Bar Pair 1255mm(W)Fitting instructionsInstallation hardware
Materials used:Black powder-coated steel
Product Dimensions:244mm (9.6") L x 60mm (2.4") W x 25mm (1") H (Single Bracket)
Weight:4.34kg (9.6lbs)
FRONT RUNNER 6 Wolf Pack Pro Drawer / Wide Incl....
$2,897.10
$3,219.00
Neatly organize and easily access all your gear with this innovative drawer-slide system. This kit was specifically designed for the Wolf Pack Pro (the ultimate plastic storage box) and includes six Wolf Pack Pro load bins so you can store and transport all your gear.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Low Lid Wolf Pack ProsInstallation HardwareFitting Instruction
Materials used:Aluminum - Accessory Channels & Sub FrameBlack powder coated steel - FrameCarpet & Laminated plywood - Top Deck
Product Dimensions:Overall Dimensions:1252mm (49.3") L x 1083mm (42.6") W x 310mm (12.2") H
Drawer Inner Dimensions:1197mm (47.1") L x 1031mm (40.6") W x 230mm (9.1") H
Drawer Unit Open Dimensions:2163mm (85.2") L x 1083mm (42.6") W x 310mm (12.2") H
Weight:67Kg (147.7lbs)
Load Rating:113Kg (250lbs)
Special Notes:Items can be secured to the top deck using the 6 supplied tie rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 6 Cub Pack Drawer / Wide Incl. Boxes...
$2,450.70
$2,723.00
If Front Runner does not offer a vehicle specific drawer kit for your make and model vehicle, consider this “universal” drawer. Since this drawer will only fit into appropriately sized vehicles, please see SPECS for exact product measurements.This removable box drawer includes 1 drawer slide, 6 Front Runner Cub Packs, locks and keys, 3 tie down rails, 6 tie down rings, brackets, all necessary installation hardware, and detailed fitment instructions.Front Runner Cub Packs, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes. These stackable and durable SBOX001 storage containers are made from black, high strength plastic and have integrated grips for easy carrying. 113kg / 250 lb per drawer load carrying capacity.
Hold open feature: drawer “locks” open while parked on uneven surfaces. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. The push-to-latch mechanism is lockable when closed. Provide peace of mind and security by locking away important support gear. The flat deck incorporates three cargo attachment channels and 6 RRAC012.
Customize your own storage configurations. Stack and secure luggage, SBOX031s, SBOX001s, aluminum boxes and other storage containers to the top deck using STRA034 or other straps. The deck above the drawer can also be used to mount Front Runner Cargo / Fridge Slides. The deck is covered with a durable, UV resistant nylon pile carpet. The nylon carpet surface creates resiliency for securing cargo while insulating against noise and vibration. Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Removable Box Drawer can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the drawers is just as easy. This storage system is designed for interior use. All Front Runner Storage Systems are backed by a 2 year warranty.
NOTE: These ''universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Drawer unit with 1 Opening Drawer1 x Push to close latch with 2 keys3 x Accessory Channels6 x Tie Down Rings6 x Cub PacksInstallation HardwareFitting InstructionMaterials used:Black powder coated steel - FrameCarpet & Laminated Plywood - Top DeckProduct Dimensions:Overall Dimensions:1000mm (39.4") L x 950mm (37.4") W x 285mm (11.2") HOpen Drawer Dimensions:1915mm (75.4") L x 950mm (37.4") W x 285mm (11.2") HInner Drawer Dimensions:946mm (37.2") L x 890mm (35") W x 222mm (8.7") HWeight:64.3kg (141.8lbs)Load Rating:113kg (250lbs)Special Notes:Items can be secured to the top deck using the 6 supplied tie down rings and fitting them accordingly to the 3 accessory channels on the top deck.Drawer has a hold open feature.
FRONT RUNNER 50In Led Light Bar Vx1250-Cb Sr Sm /...
$643.50
$715.00
You can turn night into day with this extremely powerful 50” LED lightbar, which delivers a 6000k combo beam pattern to both 12V and 24V vehicles. This ECE-compliant bar produces a super powerful white light beam up to 590 metres away. It can be quickly installed directly on your vehicle or Front Runner Roof Rack. Dark campsites and roads are a thing of the past with this light bar.
Combo beam pattern for both: far-field and near-field illumination 6000K For 12V & 24V vehicles.
Combines affordability with excellent illumination, performance, quality, shape, durability and functionality Remarkable visibility at a reasonable price.
Power Level: 8.000lm Light beam up to 590m.
Improved view and visibility in low light conditions.
Aluminum die-cast housing Shatterproof polycarbonate lens.
Robust and resistant - ensuring long life.
Single mount certified (2x ECE R149), ECE R10, ECE (Ref. 2 x 40) Overheat & polarity protection Highest protection classes according to IP6K8 & IP6K9K.
Central and individual installation possible thanks to twofold ECE certification ECE-compliant and approved for use on roads Developed to meet the highest OE standards and requirements of the automotive industry.
45 high-performance OSRAM LEDs.
Increased safety through improved illumination off-road and on-road.
Brackets included for various mounting options: hanging, standing and side Perfectly matched to individual requirements and needs for versatile applications.
OSRAM provides a 2-year guarantee.
OSRAM products are innovative and technologically high-quality products that are carefully tested and subject to the strict monitoring undertaken by the OSRAM quality assurance system.
Consists of:1 x Lightbar1 x Bracket setInstallation HardwareFitting Instructions
Product Dimensions:1282mm (50.47") L x 67mm (2.64") W x 35mm (1.38") HWeight:3.2kg (7.05lbs)
Special Notes:Product type: Off-road and On-roadLumens: 8000135W12/24 VColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 2 yearsSupplier SKU: LEDDL126-CB SR
FRONT RUNNER 4 Wolf Pack Pro Storage System Kit /...
$1,125.00
$1,250.00
This convenient narrow storage solution means your vehicle can cleverly store 4 Wolf Pack Pro boxes in style. It’s been designed for interior vehicle use or in the covered load bed of a pick-up and takes only minutes to install, and then you can easily slide your storage boxes in and out. The carpeted deck holds up to 80kg / 176.4 lbs and is perfect for fridge/cargo slides. Includes four clip-to-close, stackable, and durable Wolf Pack Pro storage boxes.
This storage system includes 1 storage unit, top deck, 4 Wolf Pack Pros, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The deck is covered with a durable, UV resistant nylon pile carpet.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.Note: Wolf Pack Pro Hi-Lid Kits are not compatible with this storage system.
FRONT RUNNER 4 Wolf Pack Pro Storage System / Narrow...
$881.10
$979.00
This convenient narrow storage solution means your vehicle can cleverly store 4 Wolf Pack Pro boxes in style. It’s been designed for interior vehicle use or in the covered load bed of a pick-up and takes only minutes to install, and then you can easily slide your storage boxes in and out. The carpeted deck holds up to 80kg and is perfect for fridge/cargo slides.
This storage system includes 1 storage unit, top deck, brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
The deck is covered with a durable, UV resistant nylon pile carpet.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
Consists of:1 x Storage unit2 X Wood decks with carpetInstallation hardwareFitting instructions
Materials used:Black powder-coating high strength steel and alumimiunNylon carpetWood
Product Dimensions:1081mm (42.6") L x 921mm (36.3") W x 313mm (12.3") H
Weight:35.3Kg (77.8lbs)
Load Rating: 80kg (176.4lbs) top deck load capacity
FRONT RUNNER 4 Wolf Pack Pro Storage System / Asymmetric...
$859.50
$955.00
This smart, asymmetrical storage solution enables your vehicle to house your 4 Wolf Pack Pro boxes. It takes minutes to install, and then you can slide your Wolf Pack Pro boxes into place. This system is spring-loaded so that the boxes won’t vibrate or move excessively. The clean bamboo deck can hold a max weight of 80 kg and is perfect for your fridge and slide.
This storage system includes 1 storage unit, top deck , brackets, all necessary installation hardware and detailed fitment instructions.
Front Runner Wolf Pack Pros, the heart of this modular storage system, are perfectly sized for kitchen supplies, dried goods, tools, camera gear, toiletries, even clothes.
These clip-to-close, stackable and durable Wolf Pack Pro storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
Insert Flat Pack in the Wolf Pack Pro or Storage Box Foam Dividers to further protect camera gear, kitchenware and other fragile items. (Front Runner Flat Packs and Storage Box Foam Dividers sold separately).
Slide your Wolf Pack Pro in the storage system for easy, rattle-free storage.
This storage system is spring-loaded to secure your Wolf Pack Pro in place, preventing vibration and excess movement.
80kg / 176.4 lbs top deck load carrying capacity, can also be used to mount Front Runner Cargo / Fridge Slides.
Finished with the same durable black powder coating as Front Runner Roof Racks and other Front Runner products.
This Front Runner Storage System can be easily installed in minutes by attaching the supplied C-hooks and turnbuckles to the vehicle’s existing mounting points. Removing the storage system is just as easy.
This storage system is designed for interior use or in a Pick-Up load bed with a canopy, camper shell, or other style bed / load bed cover.
All Front Runner Storage Systems are backed by a 2 year warranty.
If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.Note: Wolf Pack Pros are sold separately.Wolf Pack Pro Hi-Lids are not compatible with this storage system.
Consists of:1 x Storage Unit2 x Top DecksInstallation HardwareFitting Instructions
Materials used:Black powder-coated aluminium and steel
Product Dimensions:971mm (38.2") L x 971mm (38.2") W x 310mm (12.2") H
Weight:36kg (79.4lbs)
Special Note:80kg (176.4lbs) top deck load capacity
FRONT RUNNER 4 Cub Box Drawer / Wide - SSAM009
$1,011.60
$1,124.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into vehicles with a smaller than usual cargo area.
This 4 Cub Box Drawer / Wide kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying. High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base.
Fitted with a latching mechanism, the drawer is kept in place when in the closed position. 113kg/ 250 lb per drawer load carrying capacity. The flat deck allows you stack 150kg / 331 lb of gear across the surface. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack. The 4 Cub Box Drawer / Wide can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty.
Note: These “universal” drawers do not come with a vehicle specific deck completion set or faceplates.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.
*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.Please Note: Installation of this product requires a Rivnut tool. We suggest using the VACC016.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer FrameNylon Carpet & Laminated Plywood - Top DeckProduct Dimensions:653mm (25.7") L x 940mm (37") W x 261mm (10.3") HInterior Drawer Dimensions:Full Size:629mm (24.8") L x 890mm (35") W x 45mm (1.8") H(NOTE: This unit has a 20mm (0.8") H rib down the middle)2 Equally Sized Sections (Left & Right Hand Side):629mm (24.8") L x 440mm (17.3") W x 45mm (1.8") HWeight:36.8kg (81.1lbs)Load Rating:113kg (250lbs)Special Notes:The drawer has a rotating latch to secure drawer in place.
FRONT RUNNER 4 Cub Box Drawer / Narrow - SSAM008
$1,069.20
$1,188.00
If Front Runner doesn’t offer a vehicle-specific drawer kit for your make and model vehicle, consider this “universal” drawer kit. Since these drawers will only fit into appropriately sized vehicles, please see SPECS for exact product measurements. This specific drawer kit was designed to fit into narrow vehicles such as the Land Rover Defender 90/110 (1983-2016), or vehicles where the wheel arches protrude further than usual.
This 4 Cub Box Drawer / Narrow kit includes a sliding drawer system, latch mechanism and detailed fitment instructions. SBOX001, the heart of this modular storage system, are perfectly sized for kitchen support, dried goods, tools, camera gear, toiletries, even cloths. These latch-to-close, stackable and durable Cub Pack storage containers are made from black, high strength plastic and have integrated grips for easy carrying.
High-strength bearing slides allows the drawer to extend nearly 100% from the anchored base. Fitted with a latching mechanism, the drawer is kept in place when in the closed position. Customize your own storage configurations. Stack and secure luggage, SBOX031, SBOX001, aluminum boxes and other storage containers to the upper deck using STRA034 or other straps as well as RAIL007 and RRAC012.
Finished with the same durable black powder coating as the Front Runner Slimline II Rack The 4 Cub Box Drawer / Narrow can be easily installed. Depending on your vehicle’s make and model, drilling may be required. All Front Runner Storage Systems are backed by a 2-year warranty. Installation of this product requires a Rivnut tool.
*Please Note: The 4 Cub Box Drawer / Narrow does not come with an upper flat deck, deck completion set or face plates as standard fitment. The wood included in the drawer is for transportation/shipping purposes only. This “universal” drawer is designed to be a fully customized fitment.If this Drawer system is not mounted onto a rigid surface, we recommend adding SSCA021 or SSCA020.If you have any questions about whether or not this product will fit your vehicle, please contact Front Runner before purchase.*Please Note: Cub Packs are not included when purchasing this Drawer System and are sold separately.
Consists of:1 x Drawer unitFitting InstructionsMaterials used:Black powder coated mild steel - Drawer unitProduct Dimensions:906mm (35.7") L x 696mm (27.4") W x 262mm (10.3") HInterior Drawer Dimensions:882mm (34.7") L x 646mm (25.4") W x 45mm (1.8") HWeight:38.44kg (84.7lbs)Special Notes:The drawer has a rotating latch to secure the drawer in place.
FRONT RUNNER 22In Led Light Bar Fx500-Cb / 12V/24V /...
$394.20
$438.00
The searchlight features an impressive array of 20 intense, high-performance LEDs that offer a remarkable reach of 440 meters and deliver a powerful output of 5500 lumens. With a color temperature of 6000 Kelvin, the light intensity closely resembles ''daylight'' and is evenly distributed at a 5-degree angle for optimal coverage.
The intelligent reflector design ensures that the emitted light from the LEDs is carefully directed, minimizing direct exposure to oncoming traffic and reducing potential glare.
For durability in various applications, the searchlight is equipped with a sturdy polycarbonate lens that can withstand the demands of different environments.
The integrated driver and thermal management system play a critical role in maintaining LED performance and lifespan. By monitoring and regulating LED temperature, the system eliminates the risk of overheating, contributing to the light's overall longevity.
The searchlight also features full LED polarity protection, automatically breaking the circuit in case of excess voltage. This protection mechanism ensures a longer lifespan for the light.
With compatibility for both 12V and 24V systems, this ECE-compliant LED lightbar is designed for versatility and extends beyond automotive use alone. However, it's important to be aware of specific regulations and legislation in each country before utilizing the light.
The searchlight can be securely affixed to your Front Runner Roof Rack using RRAC166. For further customization, consider enhancing your lighting setup with the optional LIGH201 or LIGH202, available for separate purchase.
FRONT RUNNER 12In Led Light Bar Fx250-Cb / 12V/24V /...
$280.80
$312.00
The searchlight features a set of ten (10) high-performance LEDs that offer an impressive reach of 320 meters, emitting 2700 lumens. With a color temperature of 6000 Kelvin, the lighting output closely resembles daylight conditions, providing exceptional clarity.
The intelligent reflector design ensures even light distribution at a 5-degree angle and diverts the light from the LEDs, preventing direct exposure to oncoming traffic.
Constructed to withstand various applications, the searchlight is equipped with a durable polycarbonate lens, ensuring long-lasting performance.
The integrated driver and thermal management system not only regulate the temperature of the LEDs but also eliminate the risk of overheating. This contributes to the longevity of the searchlight's lifespan and ensures consistent operation.
Designed for both 12V and 24V systems, the LED lightbar is compliant with ECE regulations, making it suitable for a wide range of applications beyond automotive use. However, it's crucial to consider the specific regulations and legislation in each country before utilizing the light.
The searchlight can be securely attached to your Front Runner Roof Rack using RRAC166. For added customization, consider enhancing your lighting setup with the optional LIGH201 or LIGH202, which can be purchased separately.
Note: These powerful lights are designed for off-road use and should not be used on public roads. Special regulations and legislation in each country should be adhered to at all times.
FRONT RUNNER 10In Osram Led Light Round Mx260-Cb / Combo...
$507.60
$564.00
Driving in the dark? The MX260-CB is sure to light the way. This powerful LED offers the driver impressive near and far field illumination.
A high-performance LED driving light reaches a distance of 350m with a color temperature of 6000 Kelvin producing daylight lighting conditions.
Polycarbonate lens, durable to withstand off-road conditions.Full LED high beam polarity protection automatically breaks the circuit in the event of over-voltage, which ensures a long lifespan.
Equipped with an integrated driver and thermal management system, eliminating the risk of overheating.12V/24V compatibility for diverse requirements and vehicles from off-road to recreational and agricultural.
Special regulations and legislation within each country should be taken into consideration before use.
The MX260-CB must be installed in pairs for 12/24V vehicles.Secures to your Roof Rack with Osram LED Light MX240-CB/ MX260-CB/ MX180-CB/ MX250-CB Mounting Bolt Kit.
Optional LED Light Bar Wire Harness AX 2LS or LED Light Bar Wire Harness AX 1LS are available and sold separately.
Consists of:1 x Round LED Light1 x Mounting KitInstallation HardwareFitting Instructions
Product Dimensions:Light:261mm (10.3") L x 150mm (5.9") W x 229mm (9") H
Light with supplied bracket:261mm (10.3") L x 150mm (5.9") W x 251mm (9.9") H
Weight:4.4Kg (9.7lbs)
Special Notes:SKU: LEDDL112-CBLumens: 350012/24VColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 years
FRONT RUNNER 10In Led Light Bar Fx250-Cb Gen 2 /...
$279.00
$310.00
Get ready for a lifetime of nighttime lighting adventures with this powerful 10” LED lightbar. It delivers a 6000k combo beam pattern to both 12V and 24V vehicles. This ECE-compliant bar has a light beam of up to 320 metres. It’s a great way to light up the road ahead or your camping area.
Combo beam pattern 6000K For 12V & 24V vehicles.
In combination: Coverage of near and far field illumination Brilliant white light color For multivariate use.
Power Level: 2.520lm Light beam up to 320m.
Maximum of optical efficiency, effectiveness and homogeneous light distribution.
Aluminum die-cast housing Shatterproof polycarbonate lens.
Robust and resistant - ensuring long life.
Certification ECE R10, ECE R149, ECE (Ref. 25) Overheat & polarity protection Highest protection classes according to IP6K8 & IP6K9K.
ECE-compliant and approved for use on roads Developed to meet the highest OE standards and requirements of the automotive industry
Efficient reflector lens design with 10 high-performance OSRAM LEDs.
Special reflector design for an appealing and modern look and reduced glare Increased safety through improved illumination off-road and on-road.
Effective and efficient supplement for vehicles from various application areas.
The OSRAM LEDriving driving lights of the FX Gen 2 series can be attached to cars, trucks, transporters, agricultural machinery, commercial vehicles, construction vehicles, off-road vehicles, caravans and quads.
OSRAM provides a 5-year guarantee.
OSRAM products are innovative and technologically high-quality products that are carefully tested and subject to the strict monitoring undertaken by the OSRAM quality assurance system.
Consists of:1 x Lightbar1 x Bracket setInstallation HardwareFitting Instructions
Product Dimensions:54mm (2.12") L x 83mm (3.27") W x 309mm (12.16") HWeight:1.48kg (3.26lbs)
Special Notes:Product type: On-roadLumens: 252032/37W12/24VColor temperature: 6000 KLifespan Tc: 5000 hGuarantee: 5 yearsSupplier SKU: LEDDL130-CB
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
ALPINE LC70 Ultimate Status Audio & Camera Bundle, Speakers +...
$6,899.00
$7,700.00
ALPINE LC70 Ultimate Status Audio and Camera Bundle – Complete Premium Sound System
The ALPINE LC70 Ultimate Status Bundle is the complete high-end audio and safety upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining Alpine’s advanced i905-LC70 head unit, R2-Series speaker system, Alpine Status HDA-V90 amplifier, RS-SB10 shallow subwoofer, and rear view camera, this bundle delivers exceptional sound quality, powerful bass, and enhanced driving visibility.
Built using Alpine’s latest Hi-Res Audio technology, this system delivers a true high-resolution listening experience with precision, clarity, and depth, while maintaining seamless factory-style integration.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE HDA-V90 5-Channel Hi-Res Audio Amplifier
ALPINE RS-SB10 Shallow Subwoofer Enclosure
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete premium audio and safety system in one bundle
Hi-Res Audio performance with powerful, detailed sound
Deep, controlled bass from shallow subwoofer design
High-output 5-channel amplifier for full system control
Wireless Apple CarPlay and Android Auto connectivity
Improved reversing safety with rear view camera
Seamless integration for LandCruiser 70 Series Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier and advanced sound tuning
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for accurate sound reproduction
Glass-fibre reinforced cones for clarity and response
HAMR surround for enhanced bass performance
Integrated door pods with USB charging and storage
HDA-V90 Amplifier Features
5-channel Class-D amplifier with Hi-Res Audio certification
Frequency response: 10Hz – 60kHz
75W x 4 + 300W x 1 @ 4Ω output
100W x 4 + 500W x 1 @ 2Ω output
High damping factor for precise speaker control
Low distortion for clean and accurate sound
RS-SB10 Subwoofer Features
Shallow 12-inch high-performance subwoofer enclosure
600W RMS and 1800W peak power handling
Ultra-compact design for flexible installation
Neodymium magnet for high efficiency and power
20mm X-max for deep, controlled bass output
Rear View Camera Features
Wide viewing angle for improved rear visibility
HDR technology for clear image in low light conditions
Automatic activation when reversing
Day and night image adjustment
System Performance
High-resolution audio playback across full system
Powerful amplified output with deep bass response
Balanced sound staging with precise tuning capability
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete premium audio system
Off-road and touring vehicles
Users wanting high-performance sound and added safety
Why Choose This Bundle
This bundle represents the ultimate Alpine upgrade, combining industry-leading components into one complete system. Designed for performance, clarity, and reliability, it delivers a superior in-car experience with powerful sound, deep bass, and enhanced safety features.
Transform your LandCruiser 70 Series with Alpine’s ultimate audio and camera system.
ALPINE LC70 Premium Audio Bundle — Head Unit + Speakers
$4,499.00
$5,199.90
ALPINE LC70 Premium Audio Bundle – i905-LC70 Head Unit with R2-Series Speaker Upgrade
The ALPINE LC70 Premium Audio Bundle is the ultimate in-car sound upgrade for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 9-inch multimedia receiver with Alpine’s R2-Series door pod speaker system, this bundle delivers powerful, high-resolution audio with seamless factory-style integration.
Designed for both performance and practicality, this setup transforms your vehicle into a premium listening environment while enhancing interior functionality and aesthetics.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
Key Benefits
Complete premium audio upgrade for LandCruiser 70 Series Dual Cab
High-resolution sound with powerful bass and clarity
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration with modern design enhancement
Additional functionality with storage, USB charging, and lighting
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
Seamless integration designed for LC70 interior
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear for powerful output
Hi-Res Audio certified for accurate and detailed sound
Glass-fibre reinforced cones for fast response and clarity
HAMR surround for increased bass performance and control
Neodymium magnet structure for improved efficiency
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated front and rear speaker pods
Built-in USB charging ports (up to 4 devices)
Integrated puddle lighting for improved visibility at night
Storage compartments for bottles, maps, and accessories
Durable injection-moulded PC/ABS construction
Performance Specifications
Peak Power Handling: 300W
RMS Power Handling: 100W
Nominal Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Woofer Size: 6x9 inch
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers upgrading factory audio systems
Off-road and touring vehicles
Users seeking premium sound quality and modern connectivity
Why Choose This Bundle
This bundle delivers a complete, high-performance audio upgrade with seamless integration, powerful sound output, and added interior functionality. Designed specifically for the LC70, it combines Alpine’s industry-leading technology with practical features for everyday use and off-road adventures.
Upgrade your LandCruiser 70 Series with Alpine’s premium audio solution today.
ALPINE LC70 Ultimate Audio System Bundle — Head Unit +...
$5,099.00
$5,899.85
ALPINE LC70 Ultimate Audio System Bundle – Head Unit, Speaker Upgrade and Amplifier
The ALPINE LC70 Ultimate Audio System Bundle is a complete premium sound upgrade designed specifically for Toyota LandCruiser 70 Series (Dual Cab). Combining the advanced i905-LC70 multimedia receiver, Alpine R2-Series speaker door pod system, and the powerful R2-A60F amplifier, this bundle delivers exceptional clarity, depth, and power.
Engineered for audiophiles and off-road enthusiasts, this system transforms your vehicle into a high-performance listening environment with seamless factory-style integration and modern connectivity.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE R2-Series Door Pod Speaker Kit (Front and Rear) – LC70-R269P
ALPINE R2-A60F Class-D Digital Amplifier
Key Benefits
Complete premium audio system upgrade in one bundle
High-resolution sound with powerful bass and clarity
Amplified performance for maximum output and control
Wireless Apple CarPlay and Android Auto connectivity
Factory-style integration designed for LC70 Dual Cab
i905-LC70 Head Unit Features
9-inch WXGA high-definition display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for dynamic sound performance
Advanced sound tuning for customised audio control
R2-Series Speaker System Features
6x9-inch R2-Series speakers front and rear
Hi-Res Audio certified for detailed and accurate sound
Glass-fibre reinforced cones for fast response
HAMR surround for increased bass performance
High-pass crossover network with adjustable tweeter levels
Door Pod Kit Features
Direct-fit design for LandCruiser 70 Series Dual Cab
Integrated speaker pods front and rear
Built-in USB charging ports for up to 4 devices
Integrated puddle lighting for improved visibility
Storage compartments for everyday convenience
Durable PC/ABS construction for long-lasting use
R2-A60F Amplifier Features
Compact Class-D digital amplifier with reduced footprint
Hi-Res Audio certified up to 45kHz
Top panel sound controls for easy tuning
One-sided terminal layout for simplified installation
100W RMS x 4 @ 4Ω output
150W RMS x 2 @ 2Ω output
300W RMS x 2 @ 4Ω bridged
Frequency response: 10Hz – 45,000Hz
High damping factor for improved speaker control
Performance Specifications
Speaker Peak Power: 300W
Speaker RMS Power: 100W
Impedance: 4 ohms
Frequency Response: 60Hz – 40kHz
Perfect For
Toyota LandCruiser 70 Series Dual Cab
Drivers seeking a complete audio system upgrade
Off-road and touring vehicles
Users wanting powerful, high-quality sound performance
Why Choose This Bundle
This bundle delivers a complete, high-performance audio solution combining premium components for superior sound quality, power, and control. Designed specifically for the LC70, it ensures seamless integration while providing a significant upgrade over factory audio systems.
Upgrade your LandCruiser 70 Series with Alpine’s ultimate audio system bundle today.
ALPINE LC70 Premium Head Unit & Reverse Camera Bundle —...
$2,699.00
$3,099.90
ALPINE LC70 Premium Head Unit and Reverse Camera Bundle – i905-LC70 with HCE-C1100 Camera
The ALPINE LC70 Premium Bundle combines cutting-edge infotainment with enhanced driving safety, designed specifically for Toyota LandCruiser 70 Series. Featuring the advanced i905-LC70 9-inch multimedia receiver and the HCE-C1100 rear view camera, this bundle delivers seamless connectivity, high-resolution audio, and improved visibility when reversing.
Upgrade your dashboard with a modern, integrated system that enhances both your driving experience and vehicle functionality.
What’s Included
ALPINE i905-LC70 9” Integrated Hi-Res Audio Receiver
ALPINE HCE-C1100 Rear View Drive Assist Camera
Key Benefits
Complete infotainment and safety upgrade in one bundle
Wireless Apple CarPlay and Android Auto connectivity
High-definition 9-inch WXGA display
Enhanced reversing visibility with wide-angle camera
Seamless integration designed for LandCruiser 70 Series
i905-LC70 Head Unit Features
9-inch WXGA high-resolution display
Wireless Apple CarPlay and Android Auto (USB)
Built-in TIDAL for Hi-Res music streaming
Supports Hi-Res audio up to 96kHz / 24-bit
Built-in Class-D amplifier for superior sound performance
Advanced sound tuning for custom audio control
Seamless integration with LandCruiser 70 Series interior
Rear View Camera Features
Wide viewing angle: 131° horizontal, 103° vertical
HDR technology for clear vision in low-light conditions
Automatic day and night image adjustment
RCA or direct Alpine connection compatibility
Automatic activation when reversing
Compact design with included mounting hardware
Camera Specifications
Resolution: 640 x 480
Waterproof rating: IP67
Power supply: DC5.0V – DC7.0V
Viewing angle: 131° horizontal, 103° vertical
Operating temperature: -30°C to +70°C
Designed For
Toyota LandCruiser 70 Series
Off-road and touring vehicles
Daily driving and work vehicles
Drivers seeking upgraded audio and safety
Why Choose This Bundle
This bundle delivers a complete in-car upgrade, combining premium audio performance with enhanced safety features. Designed specifically for the LandCruiser 70 Series, it ensures seamless integration, modern functionality, and improved driving confidence.
Upgrade your LandCruiser 70 Series with Alpine’s premium multimedia and camera solution today.
