FRONT RUNNER Land Rover Defender Puma (2007-2016) Gullwing Box Shelf-...
$215.10
$239.00
Shelf made from plywood and powder-coated mild steel.Up to 6 of these shelves can be used in a gullwing box.Shelf has slots cut in to allow for various fixing straps or elastic straps to be used to secure plates or other items.
Consists of:1x Mild steel & wood Shelf1x Installation KitMaterial used:Shelf: Stained PlywoodShelf Support: Black powder-coated mild steelProduct dimensions:264mm (10.4") L x 856mm (33.7") W x 36mm (1.4") HWeight:3.8kg (8.4lbs)
FRONT RUNNER Land Rover Defender 90/110 (1983-2016) Fender Protector /...
$215.10
$239.00
A 1.6mm thick aluminium tread plate that fits on top of the fender of your vehicle for added protection.
Made from black powder coated aluminium.
Protects the fender against dents and scratching.
Suitable for all Defender models.
BPLD017 - Land Rover Defender 90/110 (1983-2016) Fender Protector / Black - by Front RunnerMaterial Used:Black epoxy powder - coated T6 aluminiumApproximate Installed Weight: 2.2kg (4.85lbs)Shipping Dimensions:Width: 380mm (15")Length: 1130mm (44")Height: 35mm (1")Shipping Weight:Weight: 2.2kg (5lbs)
FRONT RUNNER Under Rack Table Bracket - TBRA039
$214.20
$238.00
Transport your Front Runner Table underneath your roof rack with this noise-free, easy-access solution. These off-road tough brackets can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
These brackets have been designed to work in conjunction with the Under Rack Table and Under Rack Table Latch to make transporting a sturdy table as simple and effortless as possible.
Under Rack Table:
A no-noise and secure storage solution designed specifically for the Under Rack Table.
The brackets are easily installed and can be mounted either parallel or perpendicular to the roof rack's slats giving you the option to access the table from either the side or rear of the vehicle.
Made from steel and black powder-coated in the same durable and corrosion-resistant coating as Front Runner racks.
Under Rack Table Latch:
Keeps the Under Rack Table securely stored in the Under Rack Table Brackets.
Secured to the top of the Slimline II rack using the T-slot and clamps over the lip of the table to keep it in place.
A rubber insert prevents rattling and damage to the table.
Spring-loaded for ease of use.
Lockable for added security.
Made of steel that is black powder coated in the same durable and corrosion-resistant coating as the Front Runner racks.
NOTE: A min clearance of 65mm (2.5") between the underside of the rack and the crown of the roof is required for fitment of a Front Runner Table Kit.Not all Foot Rails accommodate side mount Tables. If unsure? Please contact the Front Runner Help Center.
Consists of:2 x Table Slide Bracket1 x Table LatchInstallation HardwareFitment Instructions
Materials used:Black powder-coated high strength steel
Product Dimensions:Single Side Bracket Dimensions:980mm (38.6") L x 63mm (2.5") W x 44mm (1.8") H
Latch Dimensions:50mm (2") L x 50mm (2") W x 115mm (4.5") HWeight:4kg (8.8lbs)
FRONT RUNNER Expedition Rail Kit - Sides - For 2166Mm...
$213.30
$237.00
Effortlessly convert a Slimline II Roof Rack into an expedition style rack with this side rail kit. Includes all hardware and components needed to fit side rails to any 11 slat-long Front Runner Slimline II Roof Rack.
Add expedition style side rails to the Front Runner Slimline II Roof Rack at any time. This side rail kit allows the front and back of the rack to remain open for loading larger items onto the Slimline II Roof Rack (eg. Canoe/Kayak, Surf Board, Lumber) or for mounting certain accessories at the edge of the rack, like the Front Runner Double Jerry Can Holder. Please Note: This kit only works with 11 Slat-long Front Runner Slimline II Roof Racks.
Install in minutes.
No drilling required.
Adds extra cargo support.
Attractive, low profile design.
Mounting hardware included.
Powder coated with the same durable, weather resistant finish as the Slimline II Roof Rack.
Manufactured with corrosion resistant, high-density aluminum components.
The Expedition Rails add 61mm / 2.4” to the height of the roof rack.
The modular bolt on design allows you to remove rail components whenever needed, ie. to mount a roof top tent off the side.
WARNING Cancer or Reproductive Harm www.P65Warnings.ca.gov
Consists of:8x Tubular rails2x Cast LH drop downs2x Cast RH drop downs6x Mid-joints with C-clipsInstallation hardwareMaterials used:Black powder-coated stainless steelBlack powder-coated die cast aluminiumProduct Dimensions:2046mm (80.6") L x 20mm (0.8") W x 62mm (2.4") HThis is one side only (LH & RH same dimensions)Weight:3.6kg (7.9lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Seamlessly integrate the Slimsport Rack Fairing specifically designed to pair with the 40” Front Runner Light Bar for a sleek look and even more functionality. After all, adventures don't end just because the sun goes down.
Lightbar wind fairing for Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Allows fitment of 40" LED Slim Light Bar VX1000-CB SM / 12V/24V / Single Mount.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Slimsport Rack 40" Light Bar Wind Fairing1 x Protection StripInstallation HardwareFitting instructionsMaterials used:Black powder coated steelProduct Dimensions:1405mm (55.3") L x 210mm (8.3") W x 206mm (8.1") HWeight:4.55kg (10lbs)
FRONT RUNNER Ford F-150 Crew Cab W/ Sunroof (2015-2020) Slimsport...
$213.30
$237.00
Smooth out the ride in your Ford F-150 Super Crew in more ways than one with the Slimsport Rack Wind Fairing. The Wind Fairing channels air fluidly over the rack and accessories to help reduce drag and wind noise. It mounts quickly to the front of your roof rack and adds an overall bolder look.
A wind fairing for the Ford F-150 Super Crew (2018-2020) Slimsport Roof Rack Kit.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
Brackets and installation hardware included.
Note: Does not work on models without a sunroof. Please contact our help center if you are unsure.
Consists of:1 x Ford F-150 Super Crew Slimsport Rack Wind FairingInstallation HardwareFitting Instructions
Materials used:Black powder coated steel
Product Dimensions:1405mm (55.3") L x 219mm (8.6") W x 223mm (8.8") H
Weight:4.02kg (8.9lbs)
FRONT RUNNER Universal Drop Down Tailgate Table - TBRA054
$211.50
$235.00
Elevate your snack or drink stops when adventuring in your vehicle with this Universal Drop Down Tailgate Table. Incredibly, it can be fitted onto any flat surface, providing a handy, on-the-go workspace. Perfect for putting the kettle, cups, glasses, or snacks on.
This Universal Drop Down Table will fit on any flat surface equal to, or larger than: 640mm/25.2" W x 330mm/13" H.
It is a universal drop down table features a large working surface of 615mm/24.2" W x 257mm/10.1" L, perfect for small cooking appliances, kettle/coffee station.
Stores neatly at 64mm/2.5" when closed.
The Universal Drop Down Table lowers to open at 90 degrees from the mounted base.
The table latch features a hole to securely lock the drawer in place, Rack Accessory Lock / Small can be used. *Sold Separately
Maximum load: 20Kg (44.1lbs).
Drilling is required for installation.
Installation hardware and fitment guide included.
Consists of:1 x Table Assembly1 x Catch Assembly2 x Arm Assembly2 x Mounting Bracket (1 Left Hand side & 1 Right Hand side)Installation HardwareFitting Instructions
Product Dimensions:Closed Dimensions:64mm (2.5") L x 636mm (25.03") W x 320mm (12.60") H
Fully Opened Dimensions:264mm (10.4") L x 636mm (25.03") W x 320mm (12.60") H
Weight:3.2kg (7.05lbs)
Load Rating:20kg (44.1lbs)
LIGHTFORCE Viper 10" Double Row Light Bar - LFLB10D
$209.70
$233.00
The new more affordable range of VIPER Lightbars by Lightforce are up to 25% slimmer and 25% less in weight than previous Lightforce Lightbars. The unique screwless bezel design allows for seamless integration for that factory look you are after. They are also IP68/69K rated that ensures your new lightbar is completely ingress protected. All VIPER Light Bars include an exclusive "smart harness" with bridge rectifier and 8 pin switch connector, marine grade , stainless steel side brackets and rear slide mounts
FRONT RUNNER Rack Ladder Side Mount Bracket - RRAC269
$208.80
$232.00
A bracket set that attaches to the side profile of your Slimline II or Slimpro Van Roof Rack.
Adjustable to suit all vehicle types and load beds.
Mounts your Rack Ladder to these brackets to access the roof of your vehicle.
These brackets can be left on your rack without being obtrusive.
Made from high-grade steel and powder coated with the same durable all-weather epoxy powder coating as the Front Runner racks.
Features
Consists of:
1 x Pair of Ladder Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
182mm (7.2") L x 87mm (3.4") W x 397mm (15.6") H
Weight:
3kg(6.6lbs)
MSA Delux Coffee Kit Cream - 45043
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
MSA Delux Coffee Kit Black - 45042
$207.00
$230.00
SUITS: All MSA 4X4 Storage Drawers
Fits snuggly into a MSA 4X4 Storage Drawer System
FEATURES: CONTENTS
1 x 600ml Thermo Coffee Plunger
2 x 240ml Thermo Cups with clear lid. Made from powder coated, stainless steel, with double-wall insulation
2 x 500ml Storage Canisters for coffee, sugar or creamer
1 x 30ml Coffee Measuring Spoon
2 x MSA 4X4 Branded Teaspoons
Mirco Fibre Cleaning Cloth
STORAGE BAG
Spill and water-resistant high quality Hypalon exterior and PVC interior
Carrying handle
Zip with double MSA 4X4 branded zip pulls
INCLUDES:
2 Year Manufacturer’s Warranty on all items
Care and safety document
(Coffee beans NOT included)
FRONT RUNNER Rotopax Side And Top Mount Kit - RRAC112
$206.10
$229.00
Free up rack space and mount fuel and water to the side or top of a Slimline II Rack.
The high strength steel Mounting Plate can hold either one (1) 15L/4 gallon or two (2) 7.5L/2 gallon RotoPax Fuel, Water or Emergency/Storage Packs on the top of the rack or using the Side Mount Brackets, off the side of the rack.
The Side Mount Brackets hold the Mounting Plate and are height (50mm/1.96")) and tilt (12.5 degree increments up to 25 degrees) adjustable.
Allows for RotoPax Packs to be positioned to suit the vehicle profile and rack contents. Also allows the RotoPax Packs to be slanted when fitted to the side of a Front Runner load bed rack, so as not to protrude excessively from the vehicle.
Rotopax Rack Mounting Plate measures in at 480mm (18.9") L x 250mm (9.8") W x 20mm (0.8") H, weighs 1,58kg (3.5lbs).
Both the Side Mounting Plate and Side Mount Brackets are finished in the same durable, weather resistant black powder coating as the Slimline II Rack.
Installation hardware and fitting instructions included.
PLEASE NOTE: RotoPax Pack Mounts (RX-PM, RX-DLX-PM and RX-LOX-PM) must be used to secure RotoPax to the Front Runner Rotopax Side Mount. The RotoPax brand Pack Mounts are SOLD SEPARATELY.
Features
Consists of:
1 x RotoPax Mounting Plate (RRAC105)
1 x Pair of RotoPax Side Mount Brackets
Installation Hardware
Fitting Instructions
Materials used:
Black powder coated high strength steel
Product Dimensions:
97mm (3.8") L x 480mm (18.9") W x 243mm (9.6") H
Weight:
2.88kg (6.4lbs)
FRONT RUNNER Vertical Jerry Can Holder - JCHO019
$205.20
$228.00
Front Runner Vertical Jerry Can Holder - JCHO019
Secure your fuel supply with confidence using the Front Runner Vertical Jerry Can Holder. Designed to safely hold a 20L NATO/Wedco-style military jerry can, this heavy-duty holder features a durable stainless steel latch system with an integrated safety catch to keep your fuel container firmly in place, even during demanding off-road adventures.
Constructed from black powder-coated stainless steel for maximum durability and corrosion resistance, this holder is built to withstand harsh environments and years of rugged use. The locking strap design covers the jerry can cap, allowing you to add a padlock for added security and peace of mind when travelling or leaving your vehicle unattended.
Key Features
Designed for 20L NATO/Wedco-style military jerry cans.
Heavy-duty stainless steel latch with integrated safety catch.
Keeps jerry cans securely mounted during off-road travel.
Lockable design helps protect fuel from theft.
Black powder-coated stainless steel construction for superior durability.
Corrosion-resistant finish for long-lasting performance.
Vertical mounting configuration saves valuable storage space.
Ideal for touring, overlanding, camping, and work vehicles.
Benefits
Provides secure transport of fuel in challenging conditions.
Reduces movement and vibration of mounted jerry cans.
Offers additional security with optional padlock compatibility.
Built to withstand years of off-road use and exposure to the elements.
Compatibility
Suitable for 20L NATO/Wedco-style military jerry cans.
Compatible with padlocks for added security.
Not suitable for Scepter-style fuel containers.
Not suitable for roof rack fitment.
Important Information
Jerry can and padlock sold separately.
The retaining strap covers the jerry can cap for enhanced security.
Designed for vertical mounting applications only.
Warranty
Manufactured to Front Runner's high-quality standards, providing dependable performance for long-term touring and off-road use.
FRONT RUNNER Wind Fairing For Low Profile Rack / 1165Mm/1255Mm(W)...
$202.50
$225.00
Make a statement and change the standard Front Runner rack Wind Deflector to this bold Front Runner Wind Fairing for Low Profile rack kits. Quickly mounts to the front of your roof rack to help move air over large rack loads and accessories, while reducing wind noise at high speeds.
Get a bold new overlanding look in minutes.
Create a solid appearance by covering the gap from roof to rack.
Air flows easily over the rack and accessories, reducing drag and wind noise.
Helps fuel consumption while carrying bulky loads.
Easily secures to your roof rack in three simple steps.
Adjustable brackets allow the Wind Fairing to be correctly angled and positioned on your vehicle.
A durable rubber blade is fitted to the bottom edge of the Wind Fairing to help seal any gaps and act as a roof guard when traveling over rough terrain.
An optional clear protective strip is included to eliminate any potential rare minor scuffing caused by heavy dust.
Consists of:1 x Wind Fairing4 x Brackets1 x Rubber BladeInstallation HardwareFitting instructions
Materials used:Black powder coated aluminumEPDM Rubber
Product Dimensions:1087mm(42.8") L x 2mm(0.1") W x 127mm(5") H
Weight:1.5kg (3.3lbs)
FRONT RUNNER Land Rover Discovery Lr4 Battery Bracket- - BBLD004
$202.50
$225.00
This battery bracket allows you to fit an additional battery to your vehicle by mounting as an additional bracket under your vehicle's hood.
Includes all fitment parts.
Made out of black powder coated high strength steel.
Fits Right Hand Drive vehicles.
NOTE: Not suitable for models fitted with an Auxiliary heater.
STORE PICK-UP ONLY- FRONT RUNNER Roof Top Tent Cover /...
$199.80
$222.00
A durable replacement tent cover for the Front Runner Roof Top Tent.
Made from 1000D PVC.
Features
Material used:
1000D PVC
Product Dimensions:
1320mm (52.0") L x 1220mm (48") W x 330mm (13") H
Weight:
3.08kg (6.8lbs)
Color:
Black
FRONT RUNNER Roof Top Tent Cover / Tan - TENT035
$199.80
$222.00
A durable tent cover made from 1000D PVC protects your tent when not in use.
Features
Material used:
1000D PVC
Product Dimensions:
1255mm (49.4") L x 1355mm (53.3") W x 310mm (12.2") H
Weight:
3.08kg (8.4lbs)
Color:
Tan
ALPINE S2-Series 4" Component Speakers - S2-S40C
$197.96
$219.95
It's time for high-res
We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound.
Innovative materials
Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement.
A 1" separate silk dome tweeter serves up all the high-frequency detail you've been missing with factory sound. Because tweeters can be challenging to install, Alpine provides in-line crossovers and a threaded removable housing to make sure you have what you need to make them sound their best.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
2-way component speaker system
4" polypropylene/glass fiber/mica woofer cone with High-Amplitude Multi-Roll surround
1" silk dome tweeter with threaded removable housing
in-line crossovers for easier installation
handles up to 45 watts RMS (140 watts peak power)
sensitivity: 86 dB
frequency range: 97-40,000 Hz
warranty: 1 year
MFR # S2-S40C
Item # 500S2S40C
What's in the box:
2 Woofers
Two 4x6 Adapter brackets
2 Tweeters (each has a 29" length of wire attached)
2 Flush mount housings (with tweeters installed)
2 Tweeter grilles (fixed)
Two 37" Tweeter wires with in-line crossovers (each has quick slides on both ends)
2 Flush mount retention rings
2 Stealth brackets
2 Flat mounting flanges (used in some factory applications)
2 Foam self-adhesive pads
2 Foam self-adhesive rings
Ten 3/4" Screws
Ten 5/16" Screws
Ten 1/4" Screws
10 Speed clips
10 Spacers
2 Adhesive backed gaskets
Warranty information
On-line product registration information
Important Notice sheet
Declaration of conformity
Templates and specs on box
ALPINE S2-Series 6" X 9" 2 Way Coaxial Speakers -...
$197.96
$219.95
It's time for high-res
We're big fans of Alpine's push to give more drivers access to high-res audio in the car. Using technology developed for their flagship F#1 Status Series, Alpine's Next Generation S-Series car speakers provide access to all the wondrous detail of your favorite high-resolution audio files at an appealing price. We recommend aftermarket power to drive these speakers, but even with factory power, their ultra-wide frequency response ensures a detailed, authentic sound.
Innovative materials
Alpine packs supreme capability into these speakers by using highly effective materials and proprietary design elements. The lightweight woofer cone, crafted from polypropylene, glass fiber, and mica materials, serves up the essential high output/low distortion sound required for high-res performance. The woofer's High Amplitude Multi-Roll (HAMR) surround brings out the best in bass by allowing maximum cone movement. A 1" silk dome tweeter serves up all the high-frequency detail you've been missing with your factory speakers.
Grilles are not included; the factory grilles should be suitable for most applications. Optional grilles are available for custom installations.
Product highlights:
6"x9" 2-way speakers
polypropylene/glass fiber/mica woofer cone with specialized rubber surround
1" silk dome tweeter
handles up to 85 watts RMS (260 watts peak power)
frequency response: 55-40,000 Hz
sensitivity: 90 dB
grilles not included
warranty: 1 year
MFR # S2-S69
Item # 500S2S69
What's in the box:
Two 2-way speakers
2 Bottom mount brackets
Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
Eight 1-1/8" Screws
Eight M4x60mm Machine screws (each screw has a lock washer attached)
Eight M4 Nuts
8 Speed clips
16 Flat washers
8 Spacers
Warranty information
On-line product registration information
Important Notice sheet
Declaration of conformity
Template and specs on box
FRONT RUNNER Land Rover Defender 110 (1983-2016) Sill Protector /...
$197.10
$219.00
Front Runner Land Rover Defender 110 Sill Protector Black - BPLD003
Protect your vehicle's door sills from everyday wear and off-road damage with the Front Runner Sill Protector for the Land Rover Defender 110. Designed specifically for Defender 110 models, these durable aluminium tread plates provide an extra layer of protection against scratches, dents, scuffs, and impacts.
Manufactured from 1.6mm thick aluminium and finished in a tough black powder coating, the sill protectors are built to withstand harsh conditions while complementing the rugged appearance of your Defender. Whether you're frequently entering and exiting the vehicle, loading equipment, or tackling challenging terrain, these protectors help preserve your vehicle's bodywork and maintain its appearance.
Key Features
Designed specifically for Land Rover Defender 110 models (1983–2016).
Provides added protection for vehicle door sills and corners.
Manufactured from durable 1.6mm thick aluminium tread plate.
Black powder-coated finish for enhanced durability and corrosion resistance.
Helps prevent dents, scratches, scuffs, and impact damage.
Enhances the rugged appearance of the vehicle.
Built to withstand demanding off-road and touring conditions.
Benefits
Protects vulnerable sill areas from everyday wear and tear.
Reduces the risk of costly bodywork repairs.
Maintains the appearance and value of your vehicle.
Provides long-lasting protection in harsh environments.
Complements the Defender's rugged styling.
Construction
Material: 1.6mm thick aluminium tread plate.
Finish: Black powder-coated.
Corrosion-resistant and weather-resistant construction.
Compatibility
Suitable for Land Rover Defender 110 models (1983–2016).
Engineered for a precise vehicle-specific fit.
Important Information
Designed specifically for Defender 110 models.
Please verify vehicle compatibility before purchase.
Professional installation is recommended if required.
LIGHTFORCE BEAST 230 Super Bundle — Driving Lights (pair) and...
$1,129.00
$1,352.00
LIGHTFORCE BEAST 230 3-Mode Driving Light Ultimate Bundle
Upgrade your vehicle lighting with the complete LIGHTFORCE BEAST 230 Ultimate Bundle. Designed for off-road enthusiasts, touring vehicles, and professional applications, this all-in-one kit delivers maximum visibility, durability, and ease of installation.
This bundle includes a pair of powerful BEAST 230 LED driving lights and a dedicated plug-and-play wiring harness for a complete lighting upgrade.
What’s Included
LIGHTFORCE BEAST 230 LED Driving Light - Pair (3-Mode) – BEAST230PK
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play solution with no additional parts required
3 beam modes: Spot, Flood, and BEAST for versatile driving conditions
Extended beam distance and wider spread for maximum visibility
Heavy-duty construction designed for extreme environments
Quick and easy installation with included wiring harness
BEAST 230 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
High-output LED performance for long-range and wide visibility
Optimised beam pattern for off-road and highway use
5700K colour temperature for clear, natural visibility
Large format design for increased light output and coverage
Daytime Running Light (DRL) functionality
Heavy-duty aluminium housing for durability and heat management
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Single 8-pin connector for clean installation
Includes relay, rocker switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
Impact-resistant construction for harsh environments
Operating temperature range: -40°C to 85°C
Resistant to UV, salt spray, and corrosion
Long-lasting LED lifespan
Specifications
Light Size: 230mm
Voltage: 12V system compatible
Colour Temperature: 5700K
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Rural and low-light environments
Why Choose LIGHTFORCE BEAST 230 Bundle
This bundle provides a complete, professional-grade lighting solution with industry-leading performance and durability. With advanced beam technology and simple installation, it is the ideal upgrade for drivers who demand reliability and visibility.
Order now to upgrade your driving visibility with a complete BEAST lighting setup.
LIGHTFORCE BEAST 190 Ultimate Bundle — Pair of Driving Lights...
$999.00
$1,150.00
LIGHTFORCE BEAST 190 Ultimate Bundle – 3-Mode Pair Of Driving Lights with Wiring Harness
The LIGHTFORCE BEAST 190 Ultimate Bundle is a complete high-performance lighting solution designed for off-road, touring, and demanding driving conditions. This bundle combines the powerful BEAST 190 LED driving lights with a dedicated 3-mode wiring harness for a simple, professional installation.
Engineered and manufactured in Australia, the BEAST 190 delivers exceptional beam distance, width, and durability in a compact 190mm design. With three selectable beam modes, this system allows you to adapt instantly to changing environments for maximum control and confidence.
What’s Included
2 X LIGHTFORCE BEAST 190 LED Driving Light – BEAST190X1
BEAST 3-Mode Universal Wiring Harness Kit – LFDLHBEAST-U
Key Benefits
Complete plug-and-play lighting solution
3 beam modes: Spot, Flood, and BEAST
Up to 1260m beam distance for long-range visibility
Compact design with extreme durability
Quick and easy installation with dedicated wiring harness
BEAST 190 Driving Light Features
3-mode beam operation: Spot, Flood, and BEAST mode
Up to 1 lux at 1260m (pair) for long-distance performance
25 high-performance Osram LEDs
5700K colour temperature for clear, natural visibility
Compact 190mm size with ultra-slim 80mm depth
Daytime Running Light (DRL) functionality
Pressure die-cast aluminium housing for strength and heat dissipation
Beam Modes
Spot Mode: Long-distance beam up to 1195m
Flood Mode: Wide beam up to 496m
BEAST Mode: Combined distance and width up to 1260m
Wiring Harness Features
Designed specifically for BEAST 3-mode driving lights
True plug-and-play installation with no rewiring required
Includes HB3 and H4 headlight adaptors
Automatic positive and negative switching compatibility
Includes relay, switch, and mounting hardware
Durability and Performance
IP69K waterproof and dustproof rating
IK16 impact resistance for extreme durability
Operating temperature range from -40°C to 85°C
Resistant to UV, salt spray, and corrosion
LED lifespan up to 50,000 hours
Specifications
Diameter: 190mm
Depth: 80mm
Weight: 1.6kg
Voltage: 13.2V
Ingress Rating: IP69K
Colour Temperature: 5700K
Warranty: 5 Years
Designed For
4WD and off-road vehicles
Touring and long-distance driving
Work and utility vehicles
Low-light and rural environments
Why Choose This Bundle
This bundle delivers a complete, professional-grade lighting upgrade with everything required for installation. Combining advanced LED performance, versatile beam control, and enhanced durability, it is ideal for drivers who demand reliability and maximum visibility in all conditions.
Upgrade your setup with the LIGHTFORCE BEAST 190 Ultimate Bundle today.
